MIBs Depot

E5-110-AESCOMMON-MIB

Registered at
1.3.6.1.4.1.6321.1.2.3.1.97.3
1.3.6.1.4.1.6321.1.2.3.1.97.4
1.3.6.1.4.1.6321.1.2.3.1.97.8
Namespace
calix
Source file
E5-110-AESCOMMON-MIB
Digest
sha256:019977961fc180e9cd1a6c21e255e9290ca7a1f92a86aadba5887998c756266c

Imports

FromSymbols
E5-110-MIBaesSeriesCommon
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

BRIDGE-MIB
E5-110-AESCOMMON-MIB
E5-110-MIB
IANAifType-MIB
IF-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
RFC1158-MIB
RFC1271-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
TOKEN-RING-RMON-MIB

Objects

NameOIDSyntaxAccessStatus
aesMaxNumOfProfiles
OBJECT-TYPE
The maximum number of ADSL profiles which the system supports.
1.3.6.1.4.1.6321.1.2.3.1.97.1INTEGERread-onlycurrent
aesLineConfTable
OBJECT-TYPE
This table includes common attributes describing the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2not-accessiblecurrent
aesLineConfEntry
OBJECT-TYPE
An entry in aesLineConfTable.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1not-accessiblecurrent
aesLineConfAdslMode
OBJECT-TYPE
The mode of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.1INTEGER {gDotLite(1), gDotDmt(2), t1Dot413(3), auto(4), etsi(5), adsl2(6), adsl2Plus(7)}read-writecurrent
aesLineConfEncap
OBJECT-TYPE
The encapsulation of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.2INTEGER {llc(1), vc(2)}read-writecurrent
aesLineConfVpi
OBJECT-TYPE
The VPI of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.3INTEGERread-writecurrent
aesLineConfVci
OBJECT-TYPE
The VCI of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.4INTEGERread-writecurrent
aesLineConfAnnexL
OBJECT-TYPE
The annex L setting of the ADSL line(Only in AnnexA).
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.5INTEGER {enableNarrowMode(1), enableWideMode(2), disable(3)}read-writecurrent
aesLineConfPmMode
OBJECT-TYPE
The power management mode of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.6INTEGER {enableL2Mode(2), disable(3)}read-writecurrent
aesLineConfRateMode
OBJECT-TYPE
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.7INTEGER {fixed(1), adaptAtStartup(2), adaptAtRuntime(3)}read-writecurrent
aesLineConfAnnexM
OBJECT-TYPE
The annex M setting of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.2.1.8INTEGER {enable(1), disable(2)}read-writecurrent
aesLineDiagnostic
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.1.97.3
aesAtucLineDiagLATN
OBJECT-TYPE
Line Attenuation.
1.3.6.1.4.1.6321.1.2.3.1.97.3.1INTEGERread-onlycurrent
aesAtucLineDiagSATN
OBJECT-TYPE
Signal Attenuation.
1.3.6.1.4.1.6321.1.2.3.1.97.3.2INTEGERread-onlycurrent
aesAtucLineDiagSNRM
OBJECT-TYPE
Signal-to-Noise Ratio Margin.
1.3.6.1.4.1.6321.1.2.3.1.97.3.3INTEGERread-onlycurrent
aesAtucLineDiagACTATP
OBJECT-TYPE
Actual Aggregate Transmit Power.
1.3.6.1.4.1.6321.1.2.3.1.97.3.4INTEGERread-onlycurrent
aesAtucLineDiagATTNDR
OBJECT-TYPE
Attainable Net Data Rate, in bps.
1.3.6.1.4.1.6321.1.2.3.1.97.3.5Unsigned32read-onlycurrent
aesAturLineDiagLATN
OBJECT-TYPE
Line Attenuation.
1.3.6.1.4.1.6321.1.2.3.1.97.3.6INTEGERread-onlycurrent
aesAturLineDiagSATN
OBJECT-TYPE
Signal Attenuation.
1.3.6.1.4.1.6321.1.2.3.1.97.3.7INTEGERread-onlycurrent
aesAturLineDiagSNRM
OBJECT-TYPE
Signal-to-Noise Ratio Margin.
1.3.6.1.4.1.6321.1.2.3.1.97.3.8INTEGERread-onlycurrent
aesAturLineDiagACTATP
OBJECT-TYPE
Actual Aggregate Transmit Power.
1.3.6.1.4.1.6321.1.2.3.1.97.3.9INTEGERread-onlycurrent
aesAturLineDiagATTNDR
OBJECT-TYPE
Attainable Net Data Rate, in bps.
1.3.6.1.4.1.6321.1.2.3.1.97.3.10Unsigned32read-onlycurrent
aesLineDiagTarget
OBJECT-TYPE
Ifindex of the ADSL port which will be diagnosed.
1.3.6.1.4.1.6321.1.2.3.1.97.3.11INTEGERread-writecurrent
aesLineDiagOps
OBJECT-TYPE
The manager sets the object to one to start line diagnostics and the agent clears the object to zero when diagnostics is successfully completed.
1.3.6.1.4.1.6321.1.2.3.1.97.3.12INTEGERread-writecurrent
aesLineDiagFailReason
OBJECT-TYPE
The reason of failed diagnostics.
1.3.6.1.4.1.6321.1.2.3.1.97.3.13DisplayStringread-onlycurrent
aesLineDiagPs
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.1.97.4
aesAtucNumOfSubcarriersPerPort
OBJECT-TYPE
The number of subcarriers per port for ATU-C.
1.3.6.1.4.1.6321.1.2.3.1.97.4.1INTEGERread-onlycurrent
aesAturNumOfSubcarriersPerPort
OBJECT-TYPE
The number of subcarriers per port for ATU-R.
1.3.6.1.4.1.6321.1.2.3.1.97.4.2INTEGERread-onlycurrent
aesLineDiagPsCCFLirl1
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 1, and the second two octets specify the li.rl value for subcarrier 2, and so on. The object provides li.rl values for subcarrier 1 to 256.
1.3.6.1.4.1.6321.1.2.3.1.97.4.3OCTET STRINGread-onlycurrent
aesLineDiagPsCCFLirl2
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 257, and the second two octets specify the li.rl value for subcarrier 258, and so on. The object provides li.rl values for subcarrier 257 to 512.
1.3.6.1.4.1.6321.1.2.3.1.97.4.4OCTET STRINGread-onlycurrent
aesLineDiagPsCCFLiim1
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 1, and the second two octets specify the li.im value for subcarrier 2, and so on. The object provides li.im values for subcarrier 1 to 256.
1.3.6.1.4.1.6321.1.2.3.1.97.4.5OCTET STRINGread-onlycurrent
aesLineDiagPsCCFLiim2
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 257, and the second two octets specify the li.im value for subcarrier 258, and so on. The object provides li.im values for subcarrier 257 to 512.
1.3.6.1.4.1.6321.1.2.3.1.97.4.6OCTET STRINGread-onlycurrent
aesLineDiagPsCCFLog1
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 1, and the second two octets specify the log value for subcarrier 2, and so on. The object provides log values for subcarrier 1 to 256.
1.3.6.1.4.1.6321.1.2.3.1.97.4.7OCTET STRINGread-onlycurrent
aesLineDiagPsCCFLog2
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 257, and the second two octets specify the log value for subcarrier 258, and so on. The object provides log values for subcarrier 257 to 512.
1.3.6.1.4.1.6321.1.2.3.1.97.4.8OCTET STRINGread-onlycurrent
aesLineDiagPsQLN
OBJECT-TYPE
Quiet Line Noise PSD QLN(f) per subcarrier. The first octet specify QLN for subcarrier 1, and the second octet specify QLN for subcarrier 2, and so on. The object provides QLN for subcarrier 1 to 512.
1.3.6.1.4.1.6321.1.2.3.1.97.4.9OCTET STRINGread-onlycurrent
aesLineDiagPsSNR
OBJECT-TYPE
Signal-to-Noise Ratio SNR(f) per subcarrier. The first octet specify SNR for subcarrier 1, and the second octet specify SNR for subcarrier 2, and so on. The object provides SNR for subcarrier 1 to 512.
1.3.6.1.4.1.6321.1.2.3.1.97.4.10OCTET STRINGread-onlycurrent
aesMaxNumOfAlarmProfiles
OBJECT-TYPE
The maximum number of ADSL alarm profiles which the system supports.
1.3.6.1.4.1.6321.1.2.3.1.97.5INTEGERread-onlycurrent
aesBitLoadingTable
OBJECT-TYPE
This table provides the number of bits per carrier for each ADSL port.
1.3.6.1.4.1.6321.1.2.3.1.97.6not-accessiblecurrent
aesBitLoadingEntry
OBJECT-TYPE
An entry in aesBitLoadingTable.
1.3.6.1.4.1.6321.1.2.3.1.97.6.1not-accessiblecurrent
aesBitLoadingBits
OBJECT-TYPE
This object provides the number of bits for all carriers in the port. The first octet specify the number of bits for carrier 1, and the second octet specify the number of bits for carrier 2, and so on. The object provides the number of bits for carrier 1 to 512.
1.3.6.1.4.1.6321.1.2.3.1.97.6.1.1OCTET STRINGread-onlycurrent
aesBitLoadingAtucNumOfCarriers
OBJECT-TYPE
The number of carriers for ATU-C.
1.3.6.1.4.1.6321.1.2.3.1.97.6.1.2INTEGERread-onlycurrent
aesBitLoadingAturNumOfCarriers
OBJECT-TYPE
The number of carriers for ATU-R.
1.3.6.1.4.1.6321.1.2.3.1.97.6.1.3INTEGERread-onlycurrent
aesLineStatusTable
OBJECT-TYPE
This table includes the ADSL line status.
1.3.6.1.4.1.6321.1.2.3.1.97.7not-accessiblecurrent
aesLineStatusEntry
OBJECT-TYPE
An entry in aesLineStatusTable.
1.3.6.1.4.1.6321.1.2.3.1.97.7.1not-accessiblecurrent
aesLineStatusAdslMode
OBJECT-TYPE
The link up mode of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.97.7.1.1INTEGER {gDotLite(1), gDotDmt(2), t1Dot413(3), etsi(4), adsl2(5), adsl2Plus(6)}read-onlycurrent
selt
OBJECT-IDENTITY
1.3.6.1.4.1.6321.1.2.3.1.97.8
seltTarget
OBJECT-TYPE
IfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.6321.1.2.3.1.97.8.1INTEGERread-writecurrent
seltOps
OBJECT-TYPE
The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
1.3.6.1.4.1.6321.1.2.3.1.97.8.2INTEGERread-writecurrent
seltStatus
OBJECT-TYPE
Status description of the selt result.
1.3.6.1.4.1.6321.1.2.3.1.97.8.3DisplayStringread-onlycurrent
seltCableType
OBJECT-TYPE
The cable type that selt result indicates.
1.3.6.1.4.1.6321.1.2.3.1.97.8.4INTEGER {awg24(1), awg26(2)}read-onlycurrent
seltLoopEstimateLengthFt
OBJECT-TYPE
The estimated loop length that selt result indicates.
1.3.6.1.4.1.6321.1.2.3.1.97.8.5INTEGERread-onlycurrent
seltLoopEstimateLengthMeter
OBJECT-TYPE
The estimated loop length that selt result indicates.
1.3.6.1.4.1.6321.1.2.3.1.97.8.6INTEGERread-onlycurrent