CTIF-EXT-MIB

Registered at: 1.3.6.1.4.1.52.4.3.3.1

1.3.6.1.4.1.52.4.3.3.2

1.3.6.1.4.1.52.4.3.3.3

1.3.6.1.4.1.52.4.3.3.4

1.3.6.1.4.1.52.4.3.3.5

1.3.6.1.4.1.52.4.3.3.6

1.3.6.1.4.1.52.4.3.3.7

1.3.6.1.4.1.52.4.3.3.8

1.3.6.1.4.1.52.4.3.3.9

1.3.6.1.4.1.52.4.3.3.10
Namespace: enterasys
Source file: CTIF-EXT-MIB
Digest: sha256:07434dd05c49cf8847ea956a27762eb396ec42cf736929965030387b67450bd2

Imports

From	Symbols
CTRON-MIB-NAMES	`ctronMib2`
IF-MIB	`ifIndex`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`

Imported by

2 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CTIF-EXT-MIB
CTRON-MIB-NAMES
CTRON-OIDS
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

Arc	Name	Module
1.3.6.1.4.1.52.4.3.3.9.1	ctFramerBaseConfig	`CTFRAMER-CONFIG-MIB`
1.3.6.1.4.1.52.4.3.3.9.2	ctFramerSonetConfig	`CTFRAMER-CONFIG-MIB`
1.3.6.1.4.1.52.4.3.3.9.3	ctFramerDS3Config	`CTFRAMER-CONFIG-MIB`

Objects

Name	OID	Syntax	Access	Status
commonDev OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.1
comDeviceTime OBJECT-TYPE The current time of day, in 24 hour format, as measured by the device. The representation shall use the standard HHMMSS format.	1.3.6.1.4.1.52.4.3.3.1.1	DisplayString (SIZE(6 \| 8))	read-write	mandatory
comDeviceDate OBJECT-TYPE The current date, as measured by the device. The representation shall use the standard MMDDYYYY format.	1.3.6.1.4.1.52.4.3.3.1.2	DisplayString (SIZE(8))	read-write	mandatory
comDeviceBoardMap OBJECT-TYPE Contains a bit encoded representation of slots that contain MIM boards. If a bit is one then that slot is occupied by a board.	1.3.6.1.4.1.52.4.3.3.1.3	INTEGER	read-only	mandatory
ctIf OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.2
ctIfTable OBJECT-TYPE This table defines an extension to the interface table.	1.3.6.1.4.1.52.4.3.3.2.1		not-accessible	mandatory
ctIfEntry OBJECT-TYPE This defines each conceptual row within the ctIfTable	1.3.6.1.4.1.52.4.3.3.2.1.1		not-accessible	mandatory
ctIfNumber OBJECT-TYPE This defines the interface that is being described. This is the same as ifIndex.	1.3.6.1.4.1.52.4.3.3.2.1.1.1	INTEGER	read-only	mandatory
ctIfPortCnt OBJECT-TYPE This defines the number of ports on the interface that is being described.	1.3.6.1.4.1.52.4.3.3.2.1.1.2	INTEGER	read-only	mandatory
ctIfConnectionType OBJECT-TYPE Defines the specific type of the interface connection (BRIM, etc). This is defined within ctron-oids. This differs from the nature of the interface as defined by ifType as found in MIB-II.	1.3.6.1.4.1.52.4.3.3.2.1.1.3	OBJECT IDENTIFIER	read-only	mandatory
ctIfLAA OBJECT-TYPE This object is used by a device (with a Token Ring interface) to set a Locally Administered Address (LAA) for it's MAC hardware address. When set, this LAA will override the default Universally Administered Address or burned in address of the interface. For devices that do not support LAA: - a read will return all zeros. - any write attempt will return BADVALUE. For devices that support LAA: - valid values are 4000 0000 0000 to 4000 7fff ffff, and 0000 0000 0000 (a value of all zeros, causes interface to use the burned in address). - a set (write) with an invalid value, returns BADVALUE. - after a write, new values will only become active after the Token Ring interface has been closed and then opened again. - a read of ctIfLAA will always return same value as ifPhysAddress, except in the case where; o ctIfLAA has been set, but interface has not yet been closed and reopened, in this case the last set value is returned. Note that a read of ifPhysAddress will always return the physical address currently being used by the interface.	1.3.6.1.4.1.52.4.3.3.2.1.1.4	OCTET STRING (SIZE(6))	read-write	mandatory
ctIfDuplex OBJECT-TYPE Defines the duplex mode that the interface is set to operate in. For devices that do not support this capability: - a read will return standard(2). - any write attempt will return BADVALUE. - fast ethernet devices will report other(1).	1.3.6.1.4.1.52.4.3.3.2.1.1.5	INTEGER {other(1), standard(2), full(3)}	read-write	mandatory
ctIfCapability OBJECT-TYPE Defines the cabability of the underlying hardware in supporting full duplex. This object will have a value of fullDuplex(3) if all hardware is capable of supporting full duplex operation.	1.3.6.1.4.1.52.4.3.3.2.1.1.6	INTEGER {other(1), standard(2), fullDuplex(3), fastEthernet(4), ethernetBased(5)}	read-only	mandatory
ctIfRedundancy OBJECT-TYPE Defines whether or not an interface supports redundancy.	1.3.6.1.4.1.52.4.3.3.2.1.1.7	INTEGER {redundant(1), not-redundant(2)}	read-only	mandatory
ctIfPort OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.3
ctIfPortTable OBJECT-TYPE This table defines an extension to the interface table.	1.3.6.1.4.1.52.4.3.3.3.1		not-accessible	mandatory
ctIfPortEntry OBJECT-TYPE This defines each conceptual row within the ctIfPortTable	1.3.6.1.4.1.52.4.3.3.3.1.1		not-accessible	mandatory
ctIfPortPortNumber OBJECT-TYPE This defines the port that is being described.	1.3.6.1.4.1.52.4.3.3.3.1.1.1	INTEGER	read-only	mandatory
ctIfPortIfNumber OBJECT-TYPE This defines the interface that the port being described is on.	1.3.6.1.4.1.52.4.3.3.3.1.1.2	INTEGER	read-only	mandatory
ctIfPortType OBJECT-TYPE Defines the specific type of the port (EPIM, TPIM). This is defined within ctron-oids.	1.3.6.1.4.1.52.4.3.3.3.1.1.3	OBJECT IDENTIFIER	read-only	mandatory
ctIfPortLinkStatus OBJECT-TYPE Defines the status of the port connection.	1.3.6.1.4.1.52.4.3.3.3.1.1.4	INTEGER {notLinked(1), linked(2), notApplicable(3)}	read-only	mandatory
ctIfPortTrapStatus OBJECT-TYPE Defines the trap forwarding status of the port. A value of (1) indicates that a trap WILL NOT be sent if the port goes down and a value of (2) which is the default value, indicates that a trap WILL be sent if the port goes down.	1.3.6.1.4.1.52.4.3.3.3.1.1.5	INTEGER {disabled(1), enabled(2)}	read-write	mandatory
ctIfCp OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.4
ctCpTable OBJECT-TYPE This table defines a Com Port Table.	1.3.6.1.4.1.52.4.3.3.4.1		not-accessible	mandatory
ctCpEntry OBJECT-TYPE This defines each conceptual row within the ctCPTable	1.3.6.1.4.1.52.4.3.3.4.1.1		not-accessible	mandatory
ctComPort OBJECT-TYPE This is the index into the Com Port Table and defines the Com Port that is being described. com1 = 1, com2 = 2	1.3.6.1.4.1.52.4.3.3.4.1.1.1	INTEGER	read-only	mandatory
ctCpFunction OBJECT-TYPE Defines the Com Port Function supported by that Com Port.	1.3.6.1.4.1.52.4.3.3.4.1.1.2	INTEGER {lm(1), ups(2), slip(3), ppp(4)}	read-write	mandatory
ctIfNum OBJECT-TYPE This defines the interface that is being described. This is the same as ifIndex. This is only valid if ctCpFunction is SLIP or PPP, otherwise, 0	1.3.6.1.4.1.52.4.3.3.4.1.1.3	INTEGER	read-only	mandatory
ctCpAdminStatus OBJECT-TYPE The administrative state of the Com Port.	1.3.6.1.4.1.52.4.3.3.4.1.1.4	INTEGER {disabled(1), enabled(2)}	read-write	mandatory
ctSNMP OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.5
enableSNMPv1 OBJECT-TYPE This object allows control over the SNMPv1 protocol. If set to a value of disable(1) then the SNMPv1 protocol will not be accepted by the device.	1.3.6.1.4.1.52.4.3.3.5.1	INTEGER {disable(1), enable(2)}	read-write	mandatory
enableSNMPv2 OBJECT-TYPE This object allows control over the SNMPv2 protocol. If set to a value of disable(1) then the SNMPv2 protocol will not be accepted by the device.	1.3.6.1.4.1.52.4.3.3.5.2	INTEGER {disable(1), enable(2)}	read-write	mandatory
enableSNMPv1Counter64 OBJECT-TYPE This object allows control over the SNMPv1 protocol agent. If set to a value of enable(2) then the SNMPv1 agent will return Counter64 objects using SNMPv2 syntax. If set to a value of disable(1) then the SNMPv1 agent will return any Counter64 objects as Counter32.	1.3.6.1.4.1.52.4.3.3.5.3	INTEGER {disable(1), enable(2)}	read-write	mandatory
ctSonet OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.6
ctSonetTable OBJECT-TYPE This table defines the Sonet table.	1.3.6.1.4.1.52.4.3.3.6.1		not-accessible	deprecated
ctSonetEntry OBJECT-TYPE This defines each conceptual row within the ctSonetTable.	1.3.6.1.4.1.52.4.3.3.6.1.1		not-accessible	deprecated
ctSonetIfIndex OBJECT-TYPE This defines the interface being described. It is the same as IfIndex.	1.3.6.1.4.1.52.4.3.3.6.1.1.1	INTEGER	read-only	deprecated
ctSonetMediumType OBJECT-TYPE This variable identifies whether a SONET or a SDH signal is used across this interface.	1.3.6.1.4.1.52.4.3.3.6.1.1.2	INTEGER {sonet(1), sdh(2)}	read-write	deprecated
ctVirtual OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.7
ctVirtualIfTable OBJECT-TYPE This table defines a Virtual IF Table.	1.3.6.1.4.1.52.4.3.3.7.1		not-accessible	mandatory
ctVirtualIfEntry OBJECT-TYPE This defines each conceptual row within the ctVirtualIfTable	1.3.6.1.4.1.52.4.3.3.7.1.1		not-accessible	mandatory
ctVirtualIfIndex OBJECT-TYPE Returns the virtual If Index.	1.3.6.1.4.1.52.4.3.3.7.1.1.1	INTEGER	read-only	mandatory
ctVirtualIfPhysicalInterface OBJECT-TYPE This value displays the physical interface that owns the virtual interface. This is the IfIndex from MIB-II.	1.3.6.1.4.1.52.4.3.3.7.1.1.2	INTEGER	read-only	mandatory
ctVirtualIfType OBJECT-TYPE This value displays the physical interface type.	1.3.6.1.4.1.52.4.3.3.7.1.1.3	OBJECT IDENTIFIER	read-only	mandatory
ctVirtualIfNumPorts OBJECT-TYPE This value displays the number of virtual ports.	1.3.6.1.4.1.52.4.3.3.7.1.1.4	INTEGER	read-only	mandatory
ctVirtualIfPortTable OBJECT-TYPE This table defines the Virtual Port types.	1.3.6.1.4.1.52.4.3.3.7.2		not-accessible	mandatory
ctVirtualIfPortEntry OBJECT-TYPE This defines each conceptual row within the ctVirtualIfPortTable.	1.3.6.1.4.1.52.4.3.3.7.2.1		not-accessible	mandatory
ctVirtualIfPortIfIndex OBJECT-TYPE Returns the virtual If Index.	1.3.6.1.4.1.52.4.3.3.7.2.1.1	INTEGER	read-only	mandatory
ctVirtualIfPortNumber OBJECT-TYPE The application port number of the port being described.	1.3.6.1.4.1.52.4.3.3.7.2.1.2	INTEGER	read-only	mandatory
ctVirtualIfPortType OBJECT-TYPE This defines the port type from ctron-oids.	1.3.6.1.4.1.52.4.3.3.7.2.1.3	INTEGER {portVirtualTypeSvc(1), portVirtualTypePvcLlc(2), portVirtualTypePvcVcmux(3)}	read-only	mandatory
ctVirtualIfPortVPI OBJECT-TYPE This returns the Virtual Path Identifier value.	1.3.6.1.4.1.52.4.3.3.7.2.1.4	INTEGER	read-only	mandatory
ctVirtualIfPortVCI OBJECT-TYPE This returns the Virtual Channel Identifier value.	1.3.6.1.4.1.52.4.3.3.7.2.1.5	INTEGER	read-only	mandatory
ctStats OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.8
ctStatsTable OBJECT-TYPE This table defines the Stats table.	1.3.6.1.4.1.52.4.3.3.8.1		not-accessible	mandatory
ctStatsEntry OBJECT-TYPE This defines each StatsTable.	1.3.6.1.4.1.52.4.3.3.8.1.1		not-accessible	mandatory
ctStatsIfIndex OBJECT-TYPE This defines the interface being described. It is the same as IfIndex.	1.3.6.1.4.1.52.4.3.3.8.1.1.1	INTEGER	read-only	mandatory
ctStatsIfEnable OBJECT-TYPE This allows the interface to pass Token Ring MAC frames to the HOST for processing. When disabled, stats will not be gathered on the interface. Default is Enabled. For devices that do not support this capability any write attempt will return BADVALUE.	1.3.6.1.4.1.52.4.3.3.8.1.1.2	INTEGER {enable(1), disable(2)}	read-write	mandatory
ctFramerConfig OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.9
ctIfHC OBJECT-IDENTITY	1.3.6.1.4.1.52.4.3.3.10
ctIfHCStatsTable OBJECT-TYPE This table defines an extension to the interface table. This table consists of interface counters grouped together. For each counter type in the table their is a 32 bit counter and a 32 bit overflow counter. This effectively provides a method for counting up to 64 bits.	1.3.6.1.4.1.52.4.3.3.10.1		not-accessible	mandatory
ctIfHCStatsEntry OBJECT-TYPE This defines each conceptual row within the ctIfHCStatsTable. Entries in this table will exist for High Capacity Interfaces.	1.3.6.1.4.1.52.4.3.3.10.1.1		not-accessible	mandatory
ctIfInOctets OBJECT-TYPE The total number of octets received on the interface, including framing characters.	1.3.6.1.4.1.52.4.3.3.10.1.1.1	Counter	read-only	mandatory
ctIfInOctetsOverflows OBJECT-TYPE The number of times the associated ctIfInOctets counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.2	Counter	read-only	mandatory
ctIfInUcastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.	1.3.6.1.4.1.52.4.3.3.10.1.1.3	Counter	read-only	mandatory
ctIfInUcastPktsOverflows OBJECT-TYPE The number of times the associated ctIfInUcastPkts counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.4	Counter	read-only	mandatory
ctIfInMulticastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.	1.3.6.1.4.1.52.4.3.3.10.1.1.5	Counter	read-only	mandatory
ctIfInMulticastPktsOverflows OBJECT-TYPE The number of times the associated ctIfInMulticastPkts counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.6	Counter	read-only	mandatory
ctIfInBroadcastPkts OBJECT-TYPE The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	1.3.6.1.4.1.52.4.3.3.10.1.1.7	Counter	read-only	mandatory
ctIfInBroadcastPktsOverflows OBJECT-TYPE The number of times the associated ctIfInBroadcastPkts counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.8	Counter	read-only	mandatory
ctIfOutOctets OBJECT-TYPE The total number of octets transmitted out of the interface, including framing characters.	1.3.6.1.4.1.52.4.3.3.10.1.1.9	Counter	read-only	mandatory
ctIfOutOctetsOverflows OBJECT-TYPE The number of times the associated ctIfOutOctets counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.10	Counter	read-only	mandatory
ctIfOutUcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.	1.3.6.1.4.1.52.4.3.3.10.1.1.11	Counter	read-only	mandatory
ctIfOutUcastPktsOverflows OBJECT-TYPE The number of times the associated ctIfOutUcastPkts counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.12	Counter	read-only	mandatory
ctIfOutMulticastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.	1.3.6.1.4.1.52.4.3.3.10.1.1.13	Counter	read-only	mandatory
ctIfOutMulticastPktsOverflows OBJECT-TYPE The number of times the associated ctIfOutMulticastPkts counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.14	Counter	read-only	mandatory
ctIfOutBroadcastPkts OBJECT-TYPE The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	1.3.6.1.4.1.52.4.3.3.10.1.1.15	Counter	read-only	mandatory
ctIfOutBroadcastPktsOverflows OBJECT-TYPE The number of times the associated ctIfOutBroadcastPkts counter has overflowed.	1.3.6.1.4.1.52.4.3.3.10.1.1.16	Counter	read-only	mandatory