CTFRAMER-CONFIG-MIB
- Registered at
- 1.3.6.1.4.1.52.4.3.3.9.11.3.6.1.4.1.52.4.3.3.9.21.3.6.1.4.1.52.4.3.3.9.3
- Namespace
- enterasys
- Source file
CTFRAMER-CONFIG-MIB- Digest
sha256:6f290941394ddd74b55ae26f0918b5fce67b5826bc4fe1fb0bf510a1cb989b0f
Imports
| From | Symbols |
|---|---|
| CTIF-EXT-MIB | ctFramerConfig, ctIfPortPortNumber |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CTFRAMER-CONFIG-MIB CTIF-EXT-MIB CTRON-MIB-NAMES CTRON-OIDS IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ctFramerBaseConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.3.3.9.1 | |||
| ctFramerConfigTable OBJECT-TYPE A list of framer configuration objects for a physical port on a particular interface. | 1.3.6.1.4.1.52.4.3.3.9.1.1 | not-accessible | mandatory | |
| ctFramerConfigEntry OBJECT-TYPE An entry containing objects pertaining to the configuration of the framer on a physical port on an interface. | 1.3.6.1.4.1.52.4.3.3.9.1.1.1 | not-accessible | mandatory | |
| ctFramerStatsConfig OBJECT-TYPE Setting this object to 'on' will activate the framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET/SDH framing or DS3 framing respectively. Note: Setting this to 'on' will permit gathering of framer statistics at the expense of processing time. However, it might be a valuable debugging aid to turn on the framer MIB. Setting this object to 'off' will deactivate the respective framer MIBs, thus saving processing time. It is emphasized that collection of statistics for the framer is resource (processor, memory) intensive. This object is persistent. | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.1 | INTEGER {on(1), off(2)} | read-write | mandatory |
| ctFramerAlarmsConfig OBJECT-TYPE This object activates/deactivates the detection and initiation of framer alarms. for SONET/SDH framed physical ports: RDI - remote defect indicator AIS - alarm indication signal for DS3 framed physical ports: yellow signal alarms This object is persistent. | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.2 | INTEGER {on(1), off(2)} | read-write | mandatory |
| ctFramerMediumConfig OBJECT-TYPE This object controls whether a SONET or a SDH signal is used across this physical port. sonet - synchronous optical network sdh - synchronous digital heirarchy This object is persistent. | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.3 | INTEGER {sonet(1), sdh(2)} | read-write | mandatory |
| ctFramerIdleCellsConfig OBJECT-TYPE When this object is set to idle, null cells will have the CLP bit set. When this object is set to unassigned, null cells will not have the CLP bit set. This object is persistent. | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.4 | INTEGER {idle(1), unassigned(2)} | read-write | mandatory |
| ctFramerCellPayScramConfig OBJECT-TYPE This object activates/deactivates cell payload transmit scrambling and receive descrambling. This object is persistent. | 1.3.6.1.4.1.52.4.3.3.9.1.1.1.5 | INTEGER {on(1), off(2)} | read-write | mandatory |
| ctFramerSonetConfig OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.3.3.9.2 | |||
| ctFramerDS3Config OBJECT-IDENTITY | 1.3.6.1.4.1.52.4.3.3.9.3 |