CISCOSB-DHCP-MIB
- Registered at
- 1.3.6.1.4.1.9.6.1.101.38
- Last updated
- 2003-10-18 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2003-10-18 00:00
- Namespace
- cisco
- Source file
CISCOSB-DHCP-MIB- Digest
sha256:4a52c47cc25dcd57f86df52c399639e852cd1d5854cdf34beebe8992bd8de06a
Description
The private MIB module definition for DHCP server support in CISCOSB devices.
Contact
Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>
Imports
| From | Symbols |
|---|---|
| CISCOSB-BRIDGEMIBOBJECTS-MIB | VlanList1, VlanList2, VlanList3, VlanList4 |
| CISCOSB-MIB | switch001 |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB CISCOSB-BRIDGEMIBOBJECTS-MIB CISCOSB-DHCP-MIB CISCOSB-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| RlDhcpSrvOptionTypeEnum TEXTUAL-CONVENTION Ip Dhcp server option type enumeration. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| rsDhcpMibVersion OBJECT-TYPE DHCP MIB's version, the current version is 4. | 1.3.6.1.4.1.9.6.1.101.38.14 | INTEGER | read-write | current |
| rlDhcpRelayMaximalNumberOfNonIpVlans OBJECT-TYPE Maximal number non-ip vlans that DHCP relay can be confirued on. | 1.3.6.1.4.1.9.6.1.101.38.23 | Unsigned32 | read-only | current |
| rlDhcpRelayCurrentNumberOfNonIpVlans OBJECT-TYPE Current number non-ip vlans that DHCP relay can be confirued on. | 1.3.6.1.4.1.9.6.1.101.38.24 | Unsigned32 | read-only | current |
| rlDhcpRelayEnable OBJECT-TYPE Enable or disable the use of the DHCP relay. | 1.3.6.1.4.1.9.6.1.101.38.25 | TruthValue | read-write | current |
| rlDhcpRelayExists OBJECT-TYPE This variable shows whether the device can function as a DHCP Relay Agent. | 1.3.6.1.4.1.9.6.1.101.38.26 | TruthValue | read-only | current |
| rlDhcpRelayNextServerTable OBJECT-TYPE The DHCP Relay Next Servers configuration Table | 1.3.6.1.4.1.9.6.1.101.38.27 | not-accessible | current | |
| rlDhcpRelayNextServerEntry OBJECT-TYPE The row definition for this table. DHCP requests are relayed to the specified next server according to their threshold values. | 1.3.6.1.4.1.9.6.1.101.38.27.1 | not-accessible | current | |
| rlDhcpRelayNextServerIpAddr OBJECT-TYPE The IPAddress of the next configuration server. DHCP Server may act as a DHCP relay if this parameter is not equal to 0.0.0.0. | 1.3.6.1.4.1.9.6.1.101.38.27.1.1 | IpAddress | read-only | current |
| rlDhcpRelayNextServerSecThreshold OBJECT-TYPE DHCP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local DHCP Servers to answer first. | 1.3.6.1.4.1.9.6.1.101.38.27.1.2 | Unsigned32 | read-write | current |
| rlDhcpRelayNextServerRowStatus OBJECT-TYPE This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | 1.3.6.1.4.1.9.6.1.101.38.27.1.3 | RowStatus | read-write | current |
| rlDhcpRelayInterfaceTable OBJECT-TYPE The enabled DHCP Relay Interface Table | 1.3.6.1.4.1.9.6.1.101.38.28 | not-accessible | current | |
| rlDhcpRelayInterfaceEntry OBJECT-TYPE The row definition for this table. The user can add entry when DHCP relay is enabled on Interface. | 1.3.6.1.4.1.9.6.1.101.38.28.1 | not-accessible | current | |
| rlDhcpRelayInterfaceIfindex OBJECT-TYPE The Interface on which an user enables a DHCP relay | 1.3.6.1.4.1.9.6.1.101.38.28.1.1 | INTEGER | read-write | current |
| rlDhcpRelayInterfaceUseGiaddr OBJECT-TYPE The flag is used to set a DHCP relay interface to use GiAddr in the standard way. Default is TRUE. The field is not supported. | 1.3.6.1.4.1.9.6.1.101.38.28.1.2 | TruthValue | read-write | current |
| rlDhcpRelayInterfaceRowStatus OBJECT-TYPE Entry status. Can be destroy, active or createAndGo | 1.3.6.1.4.1.9.6.1.101.38.28.1.3 | RowStatus | read-write | current |
| rlDhcpRelayInterfaceListTable OBJECT-TYPE This table contains one entry. The entry contains port list and vlan lists of interfaces that have configured DHCP relay | 1.3.6.1.4.1.9.6.1.101.38.29 | not-accessible | current | |
| rlDhcpRelayInterfaceListEntry OBJECT-TYPE The entry contains port list and vlan lists of interfaces that have configured DHCP relay. | 1.3.6.1.4.1.9.6.1.101.38.29.1 | not-accessible | current | |
| rlDhcpRelayInterfaceListIndex OBJECT-TYPE Index in the table. Already 1. | 1.3.6.1.4.1.9.6.1.101.38.29.1.1 | INTEGER | read-only | current |
| rlDhcpRelayInterfaceListPortList OBJECT-TYPE DHCP relay Interface Port List. | 1.3.6.1.4.1.9.6.1.101.38.29.1.2 | PortList | read-write | current |
| rlDhcpRelayInterfaceListVlanId1To1024 OBJECT-TYPE DHCP relay Interface VlanId List 1. | 1.3.6.1.4.1.9.6.1.101.38.29.1.3 | VlanList1 | read-write | current |
| rlDhcpRelayInterfaceListVlanId1025To2048 OBJECT-TYPE DHCP relay Interface VlanId List 2. | 1.3.6.1.4.1.9.6.1.101.38.29.1.4 | VlanList2 | read-write | current |
| rlDhcpRelayInterfaceListVlanId2049To3072 OBJECT-TYPE DHCP relay Interface VlanId List 3. | 1.3.6.1.4.1.9.6.1.101.38.29.1.5 | VlanList3 | read-write | current |
| rlDhcpRelayInterfaceListVlanId3073To4094 OBJECT-TYPE DHCP relay Interface VlanId List 4. | 1.3.6.1.4.1.9.6.1.101.38.29.1.6 | VlanList4 | read-write | current |
| rlDhcpSrvEnable OBJECT-TYPE Enable or Disable the use of the DHCP Server. For a router product the default value is TRUE. For a switch product the default is FALSE. | 1.3.6.1.4.1.9.6.1.101.38.30 | TruthValue | read-write | current |
| rlDhcpSrvExists OBJECT-TYPE This variable shows whether the device can function as a DHCP Server. | 1.3.6.1.4.1.9.6.1.101.38.31 | TruthValue | read-only | current |
| rlDhcpSrvDbLocation OBJECT-TYPE Describes where DHCP Server database is stored. | 1.3.6.1.4.1.9.6.1.101.38.32 | INTEGER {nvram(1), flash(2)} | read-only | obsolete |
| rlDhcpSrvMaxNumOfClients OBJECT-TYPE This variable shows maximum number of clients that can be supported by DHCP Server dynamic allocation. | 1.3.6.1.4.1.9.6.1.101.38.33 | Unsigned32 | read-only | current |
| rlDhcpSrvDbNumOfActiveEntries OBJECT-TYPE This variable shows number of active (valid) entries stored in database. | 1.3.6.1.4.1.9.6.1.101.38.34 | Unsigned32 | read-only | current |
| rlDhcpSrvDbErase OBJECT-TYPE The value is always false. Setting this variable to true causes erasing all entries in DHCP database. | 1.3.6.1.4.1.9.6.1.101.38.35 | TruthValue | read-write | obsolete |
| rlDhcpSrvProbeEnable OBJECT-TYPE Enable or Disable the use of the DHCP probe before allocating an IP address. | 1.3.6.1.4.1.9.6.1.101.38.36 | TruthValue | read-write | current |
| rlDhcpSrvProbeTimeout OBJECT-TYPE Indicates the peiod of time in milliseconds the DHCP probe will wait before issuing a new trial or deciding that no other device on the network has the IP address which DHCP considers allocating. | 1.3.6.1.4.1.9.6.1.101.38.37 | Unsigned32 (300..10000) | read-write | current |
| rlDhcpSrvProbeRetries OBJECT-TYPE Indicates how many times DHCP will probe before deciding that no other device on the network has the IP address which DHCP considers allocating. | 1.3.6.1.4.1.9.6.1.101.38.38 | Unsigned32 (1..10) | read-write | current |
| rlDhcpSrvDefaultNetworkPoolName OBJECT-TYPE Contains a default network pool name. Used in case of one network pool only. | 1.3.6.1.4.1.9.6.1.101.38.39 | DisplayString (SIZE(1..32)) | read-only | current |
| rlDhcpSrvIpAddrTable OBJECT-TYPE Table of IP Addresses allocated by DHCP Server by static and dynamic allocations. | 1.3.6.1.4.1.9.6.1.101.38.45 | not-accessible | current | |
| rlDhcpSrvIpAddrEntry OBJECT-TYPE The row definition for this table. Parameters of DHCP allocated IP Addresses table. | 1.3.6.1.4.1.9.6.1.101.38.45.1 | not-accessible | current | |
| rlDhcpSrvIpAddrIpAddr OBJECT-TYPE The IP address that was allocated by DHCP Server. | 1.3.6.1.4.1.9.6.1.101.38.45.1.1 | IpAddress | read-write | current |
| rlDhcpSrvIpAddrIpNetMask OBJECT-TYPE The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | 1.3.6.1.4.1.9.6.1.101.38.45.1.2 | IpAddress | read-write | current |
| rlDhcpSrvIpAddrIdentifier OBJECT-TYPE Unique Identifier for client. Either physical address or DHCP Client Identifier. | 1.3.6.1.4.1.9.6.1.101.38.45.1.3 | OCTET STRING (SIZE(2..32)) | read-write | current |
| rlDhcpSrvIpAddrIdentifierType OBJECT-TYPE Identifier Type. Either physical address or DHCP Client Identifier. | 1.3.6.1.4.1.9.6.1.101.38.45.1.4 | INTEGER {physAddr(1), clientId(2)} | read-write | current |
| rlDhcpSrvIpAddrClnHostName OBJECT-TYPE Client Host Name. DHCP Server will use it to update DNS Server. Must be unique per client. | 1.3.6.1.4.1.9.6.1.101.38.45.1.5 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| rlDhcpSrvIpAddrMechanism OBJECT-TYPE Mechanism of allocation IP Address by DHCP Server. The only value that can be set by user is manual. | 1.3.6.1.4.1.9.6.1.101.38.45.1.6 | INTEGER {manual(1), automatic(2), dynamic(3)} | read-write | current |
| rlDhcpSrvIpAddrAgeTime OBJECT-TYPE Age time of the IP Address. | 1.3.6.1.4.1.9.6.1.101.38.45.1.7 | Unsigned32 | read-only | current |
| rlDhcpSrvIpAddrPoolName OBJECT-TYPE Ip address pool name. A unique name for host pool static allocation, or network pool name in case of dynamic allocation. | 1.3.6.1.4.1.9.6.1.101.38.45.1.8 | DisplayString (SIZE(1..32)) | read-write | current |
| rlDhcpSrvIpAddrConfParamsName OBJECT-TYPE This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table. | 1.3.6.1.4.1.9.6.1.101.38.45.1.9 | DisplayString (SIZE(0..32)) | read-write | current |
| rlDhcpSrvIpAddrRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.38.45.1.10 | RowStatus | read-write | current |
| rlDhcpSrvIpAddrLeaseTime OBJECT-TYPE Lease time of the IP Address. Get a value of network pool lease time at allocation time. | 1.3.6.1.4.1.9.6.1.101.38.45.1.11 | Unsigned32 | read-only | current |
| rlDhcpSrvIpAddrState OBJECT-TYPE State of allocation IP Address by DHCP Server. | 1.3.6.1.4.1.9.6.1.101.38.45.1.12 | INTEGER {pre-allocated(1), valid(2), expired(3), declined(4)} | read-only | current |
| rlDhcpSrvIpAddrOptionParamsName OBJECT-TYPE The name of DHCP Option Table. | 1.3.6.1.4.1.9.6.1.101.38.45.1.13 | DisplayString (SIZE(0..32)) | read-write | current |
| rlDhcpSrvDynamicTable OBJECT-TYPE The DHCP Dynamic Server's configuration Table | 1.3.6.1.4.1.9.6.1.101.38.46 | not-accessible | current | |
| rlDhcpSrvDynamicEntry OBJECT-TYPE The row definition for this table. Parameters sent in as a DHCP Reply to DHCP Request with specified indices | 1.3.6.1.4.1.9.6.1.101.38.46.1 | not-accessible | current | |
| rlDhcpSrvDynamicPoolName OBJECT-TYPE The name of DHCP dynamic addresses pool. | 1.3.6.1.4.1.9.6.1.101.38.46.1.1 | DisplayString (SIZE(1..32)) | read-write | current |
| rlDhcpSrvDynamicIpAddrFrom OBJECT-TYPE The first IP address allocated in this row. | 1.3.6.1.4.1.9.6.1.101.38.46.1.2 | IpAddress | read-write | current |
| rlDhcpSrvDynamicIpAddrTo OBJECT-TYPE The last IP address allocated in this row. | 1.3.6.1.4.1.9.6.1.101.38.46.1.3 | IpAddress | read-write | current |
| rlDhcpSrvDynamicIpNetMask OBJECT-TYPE The subnet mask associated with the IP addresses of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | 1.3.6.1.4.1.9.6.1.101.38.46.1.4 | IpAddress | read-write | current |
| rlDhcpSrvDynamicLeaseTime OBJECT-TYPE Maximum lease-time in seconds granted to a requesting DHCP client. For automatic allocation use 0xFFFFFFFF. To exclude addresses from allocation mechanism, set this value to 0. | 1.3.6.1.4.1.9.6.1.101.38.46.1.5 | Unsigned32 | read-write | current |
| rlDhcpSrvDynamicProbeEnable OBJECT-TYPE Enable or Disable the use of the DHCP probe before allocating the address. | 1.3.6.1.4.1.9.6.1.101.38.46.1.6 | TruthValue | read-write | current |
| rlDhcpSrvDynamicTotalNumOfAddr OBJECT-TYPE Total number of addresses in space. | 1.3.6.1.4.1.9.6.1.101.38.46.1.7 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicFreeNumOfAddr OBJECT-TYPE Free number of addresses in space. | 1.3.6.1.4.1.9.6.1.101.38.46.1.8 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicConfParamsName OBJECT-TYPE This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table. | 1.3.6.1.4.1.9.6.1.101.38.46.1.9 | DisplayString (SIZE(0..32)) | read-write | current |
| rlDhcpSrvDynamicRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.38.46.1.10 | RowStatus | read-write | current |
| rlDhcpSrvDynamicAvailableNumOfAddr OBJECT-TYPE Number of available addresses in space - all range minus excluded. | 1.3.6.1.4.1.9.6.1.101.38.46.1.11 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicNumOfPreallocatedAddr OBJECT-TYPE The number of preallocated addresses in space. | 1.3.6.1.4.1.9.6.1.101.38.46.1.12 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicNumOfValidAddr OBJECT-TYPE The number of Valid (allocated) addresses in space. | 1.3.6.1.4.1.9.6.1.101.38.46.1.13 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicNumOfExpiredAddr OBJECT-TYPE The number of expired addresses in space. | 1.3.6.1.4.1.9.6.1.101.38.46.1.14 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicNumOfDeclinedAddr OBJECT-TYPE The number of declined addresses in space. | 1.3.6.1.4.1.9.6.1.101.38.46.1.15 | Unsigned32 | read-only | current |
| rlDhcpSrvDynamicOptionParamsName OBJECT-TYPE The name of DHCP Option Table. | 1.3.6.1.4.1.9.6.1.101.38.46.1.16 | DisplayString (SIZE(0..32)) | read-write | current |
| rlDhcpSrvConfParamsTable OBJECT-TYPE The DHCP Configuration Parameters Table | 1.3.6.1.4.1.9.6.1.101.38.47 | not-accessible | current | |
| rlDhcpSrvConfParamsEntry OBJECT-TYPE The row definition for this table. Each entry corresponds to one specific parameters set. | 1.3.6.1.4.1.9.6.1.101.38.47.1 | not-accessible | current | |
| rlDhcpSrvConfParamsName OBJECT-TYPE This value is a unique index for the entry in the rlDhcpSrvConfParamsTable. | 1.3.6.1.4.1.9.6.1.101.38.47.1.1 | DisplayString (SIZE(1..32)) | read-write | current |
| rlDhcpSrvConfParamsNextServerIp OBJECT-TYPE The IP of next server for client to use in configuration process. | 1.3.6.1.4.1.9.6.1.101.38.47.1.2 | IpAddress | read-write | current |
| rlDhcpSrvConfParamsNextServerName OBJECT-TYPE The mame of next server for client to use in configuration process. | 1.3.6.1.4.1.9.6.1.101.38.47.1.3 | DisplayString (SIZE(0..64)) | read-write | current |
| rlDhcpSrvConfParamsBootfileName OBJECT-TYPE Name of file for client to request from next server. | 1.3.6.1.4.1.9.6.1.101.38.47.1.4 | DisplayString (SIZE(0..128)) | read-write | current |
| rlDhcpSrvConfParamsRoutersList OBJECT-TYPE The value of option code 3, which defines default routers list. Each IP address is represented in dotted decimal notation format with ';' between them. | 1.3.6.1.4.1.9.6.1.101.38.47.1.5 | DisplayString | read-write | current |
| rlDhcpSrvConfParamsTimeSrvList OBJECT-TYPE The value of option code 4, which defines time servers list. Each IP address is represented in dotted decimal notation format with ';' between them. | 1.3.6.1.4.1.9.6.1.101.38.47.1.6 | DisplayString | read-write | current |
| rlDhcpSrvConfParamsDnsList OBJECT-TYPE The value of option code 6, which defines the list of DNSs. Each IP address is represented in dotted decimal notation format with ';' between them. | 1.3.6.1.4.1.9.6.1.101.38.47.1.7 | DisplayString | read-write | current |
| rlDhcpSrvConfParamsDomainName OBJECT-TYPE The value option code 15, which defines the domain name.. | 1.3.6.1.4.1.9.6.1.101.38.47.1.8 | SnmpAdminString (SIZE(0..32)) | read-write | current |
| rlDhcpSrvConfParamsNetbiosNameList OBJECT-TYPE The value option code 44, which defines the list of NETBios Name Servers. Each IP address is represented in dotted decimal notation format with ';' between them. | 1.3.6.1.4.1.9.6.1.101.38.47.1.9 | DisplayString | read-write | current |
| rlDhcpSrvConfParamsNetbiosNodeType OBJECT-TYPE The value option code 46, which defines the NETBios node type. The option will be added only if rlDhcpSrvConfParamsNetbiosNameList is not empty. | 1.3.6.1.4.1.9.6.1.101.38.47.1.10 | INTEGER {b-node(1), p-node(2), m-node(4), h-node(8)} | read-write | current |
| rlDhcpSrvConfParamsCommunity OBJECT-TYPE The value of site-specific option 128, which defines Community. The option will be added only if rlDhcpSrvConfParamsNmsIp is set. | 1.3.6.1.4.1.9.6.1.101.38.47.1.11 | DisplayString (SIZE(0..32)) | read-write | obsolete |
| rlDhcpSrvConfParamsNmsIp OBJECT-TYPE The value of site-specific option 129, which defines IP of Network Manager. | 1.3.6.1.4.1.9.6.1.101.38.47.1.12 | IpAddress | read-write | obsolete |
| rlDhcpSrvConfParamsOptionsList OBJECT-TYPE The sequence of option segments. Each option segment is represented by a triplet <code/length/value>. The code defines the code of each supported option. The length defines the length of each supported option. The value defines the value of the supported option. If there is a number of elements in the value field, they are divided by ','. Each element of type IP address in value field is represented in dotted decimal notation format. | 1.3.6.1.4.1.9.6.1.101.38.47.1.13 | DisplayString | read-write | obsolete |
| rlDhcpSrvConfParamsRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.38.47.1.14 | RowStatus | read-write | current |
| rlDhcpSrvConfParamsAutoDefaultRouter OBJECT-TYPE Controls sending an IP address defined on the input interface as a default router when an default router is not configured as option. | 1.3.6.1.4.1.9.6.1.101.38.47.1.15 | TruthValue | read-write | current |
| rlDhcpSrvNumOfNetworkPools OBJECT-TYPE This variable shows number of network pools (not excluded). | 1.3.6.1.4.1.9.6.1.101.38.48 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfExcludedPools OBJECT-TYPE This variable shows number of excluded pools. | 1.3.6.1.4.1.9.6.1.101.38.49 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfHostPools OBJECT-TYPE This variable shows number of static entries stored in database. | 1.3.6.1.4.1.9.6.1.101.38.50 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfDynamicEntries OBJECT-TYPE This variable shows number of dynamic and automatic (not static) entries stored in database. | 1.3.6.1.4.1.9.6.1.101.38.51 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfUsedEntries OBJECT-TYPE This variable shows number of entries (any type) stored in database. | 1.3.6.1.4.1.9.6.1.101.38.52 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfPreAllocatedEntries OBJECT-TYPE This variable shows number of preallocated entries. | 1.3.6.1.4.1.9.6.1.101.38.53 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfExpiredEntries OBJECT-TYPE This variable shows number of expired entries. | 1.3.6.1.4.1.9.6.1.101.38.54 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfDeclinedEntries OBJECT-TYPE This variable shows number of declined entries. | 1.3.6.1.4.1.9.6.1.101.38.55 | Unsigned32 | read-only | current |
| rlDhcpSrvNumOfAutomaticEntries OBJECT-TYPE This variable shows number of automatic entries. | 1.3.6.1.4.1.9.6.1.101.38.56 | Unsigned32 | read-only | current |
| rlDhcpSrvOptionParamsTable OBJECT-TYPE The DHCP Option Parameters Table | 1.3.6.1.4.1.9.6.1.101.38.57 | not-accessible | current | |
| rlDhcpSrvOptionParamsEntry OBJECT-TYPE The row definition for this table. Each entry corresponds to one specific parameters set. | 1.3.6.1.4.1.9.6.1.101.38.57.1 | not-accessible | current | |
| rlDhcpSrvOptionParamsName OBJECT-TYPE This value is a unique index for the entry in the rlDhcpSrvOptionParamsTable. | 1.3.6.1.4.1.9.6.1.101.38.57.1.1 | DisplayString (SIZE(1..32)) | read-write | current |
| rlDhcpSrvOptionParamsCode OBJECT-TYPE The option code. | 1.3.6.1.4.1.9.6.1.101.38.57.1.2 | Unsigned32 (0..255) | read-write | current |
| rlDhcpSrvOptionParamsType OBJECT-TYPE The option type. | 1.3.6.1.4.1.9.6.1.101.38.57.1.3 | RlDhcpSrvOptionTypeEnum | read-write | current |
| rlDhcpSrvOptionParamsOrigString OBJECT-TYPE The option value. | 1.3.6.1.4.1.9.6.1.101.38.57.1.4 | DisplayString | read-write | current |
| rlDhcpSrvOptionParamsDescription OBJECT-TYPE The option description. | 1.3.6.1.4.1.9.6.1.101.38.57.1.5 | DisplayString | read-write | current |
| rlDhcpSrvOptionParamsRowStatus OBJECT-TYPE The row status variable, used according to row installation and removal conventions. | 1.3.6.1.4.1.9.6.1.101.38.57.1.6 | RowStatus | read-write | current |
| rlDhcpSrvAuxOptionTable OBJECT-TYPE The DHCP Auxulary Option Table | 1.3.6.1.4.1.9.6.1.101.38.58 | not-accessible | current | |
| rlDhcpSrvAuxOptionEntry OBJECT-TYPE The row definition for this table. Each entry contains pair option code/option type that permitted by option command. | 1.3.6.1.4.1.9.6.1.101.38.58.1 | not-accessible | current | |
| rlDhcpSrvAuxOptionCode OBJECT-TYPE The option Code. | 1.3.6.1.4.1.9.6.1.101.38.58.1.1 | Unsigned32 (1..254) | read-only | current |
| rlDhcpSrvAuxOptionType OBJECT-TYPE The option enumeration. | 1.3.6.1.4.1.9.6.1.101.38.58.1.2 | RlDhcpSrvOptionTypeEnum | read-only | current |
| rlDhcpSrvAuxOptionMinVal OBJECT-TYPE The minimal value of this option Code. | 1.3.6.1.4.1.9.6.1.101.38.58.1.3 | Unsigned32 | read-only | current |
| rlDhcpSrvAuxOptionMaxVal OBJECT-TYPE The maximal value of this option Code. | 1.3.6.1.4.1.9.6.1.101.38.58.1.4 | Unsigned32 | read-only | current |