MIBs Depot

CISCO-SERVICE-CONTROLLER-MIB

Registered at
1.3.6.1.4.1.9.9.667
Last updated
2011-03-03 00:00
Organization
Cisco Systems, Inc.
Revisions
2011-03-03 00:00, 2008-08-04 00:00
Namespace
cisco
Source file
CISCO-SERVICE-CONTROLLER-MIB
Digest
sha256:fb83a9f54fd9801e2fe5ea3a89dfe86d2bc5f99217fd43a686c4355a80e6a274

Description

This MIB module defines objects describing traffic controllers used by a service control entity. A service control entity is a network device which monitors and controls traffic. The service control enitity is used as a platform for different service control applications which may perform monitoring operations beyond packet counting and delve deeper into the contents of network traffic, such as deep packet inspection. It provides programmable stateful inspection of bidirectional traffic flows, maps these flows to users or subscribers, and can control traffic flow according to different attributes. A service control entity traffic controller can act as a rather simple policer or implement more complicated logic in controlling traffic, up to actual applicative attributes of the traffic itself. The global service controller is a controller component implemented by the service control entity, which acts as a rather simple policer for traffic transiting through the service control entity. A global service controller may be configured per service control entity interface with a configurable bandwidth limitation. The controller is responsible for the enforcement of the bandwith limitation configured in the service control entity. Aggregative global controller is a mechanism that allows dynamic bandwidth allocation between two global controllers that reside on the same direction of two links. Regularly, a global controller is configured per physical port. When aggregative global controller is configured, the relevant per-port global controllers are configured dynamically and automatically by the aggregative global controller mechanism. Primary bandwidth controller controls the total of subscriber traffic and manage the number of bandwidth controller. Its main properties are committed information rate, peak information rate, and relative priority.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-excelsior-dev@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
ENTITY-MIBentPhysicalIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-SERVICE-CONTROLLER-MIB
CISCO-SMI
ENTITY-MIB
IANA-ENTITY-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
ciscoServiceControlMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.667.0
cscGlobalControllersTable
OBJECT-TYPE
This table contains data for each global service controller in the service control entity. The table has an expansion dependent relationship on the entPhysicalTable, containing zero or more rows for each physical entity.
1.3.6.1.4.1.9.9.667.0.1not-accessiblecurrent
cscGlobalControllersEntry
OBJECT-TYPE
This entry contains the operational data for the global service controller associated with the service control entity identified by its assigned entPhysicalIndex. Each entry uniquely identifies a global controller by its index. The
1.3.6.1.4.1.9.9.667.0.1.1not-accessiblecurrent
cscGlobalControllersIndex
OBJECT-TYPE
This object indicates an arbitrary integer-value that uniquely identifies a global service controller.
1.3.6.1.4.1.9.9.667.0.1.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
cscGlobalControllersId
OBJECT-TYPE
This object indicates the unique id assigned to this global controller by the service control entity.
1.3.6.1.4.1.9.9.667.0.1.1.2Unsigned32read-createcurrent
cscGlobalControllersDescription
OBJECT-TYPE
This object indicates a human readable string which is the name associated with this global service controller.
1.3.6.1.4.1.9.9.667.0.1.1.3SnmpAdminString (SIZE(1..255))read-createcurrent
cscGlobalControllersBandwidthUnits
OBJECT-TYPE
An enumerated value which identifies the units for cscGlobalControllersBandwidth value, such as 'kbps' (kilobit per second), 'mbps' (megabit per second), etc.
1.3.6.1.4.1.9.9.667.0.1.1.4INTEGER {kbps(1), mbps(2)}read-createcurrent
cscGlobalControllersBandwidth
OBJECT-TYPE
This object indicates the bandwidth limitation for this global controller to enforce. The units of cscGlobalControllersBandwidth are indicated by the value of cscGlobalControllersBandwidthUnits.
1.3.6.1.4.1.9.9.667.0.1.1.5Unsigned32 (0..4294967295)read-createcurrent
cscGlobalControllersUtilization
OBJECT-TYPE
This object specifies the percentage of utilized bandwidth of the controller out of the configured bandwidth limitation by the cscGlobalControllersBandwidth. For example, if cscGlobalControllersBandwidth = 1000 kbps and cscGlobalControllersUtilization = 65%, then the current utilization of this controller is 650 kbps.
1.3.6.1.4.1.9.9.667.0.1.1.6Unsigned32 (0..100)read-createcurrent
cscAggregativeGlobalControllersTable
OBJECT-TYPE
This table lists the aggregative global controller associated with the service controller entity.
1.3.6.1.4.1.9.9.667.0.2not-accessiblecurrent
cscAggregativeGlobalControllersEntry
OBJECT-TYPE
This entry contains the operational data for the aggregative global controller associated with the service control entity. Each entry uniquely identifies an aggregative global controller by its indices.
1.3.6.1.4.1.9.9.667.0.2.1not-accessiblecurrent
cscAggregativeGlobalControllersSide
OBJECT-TYPE
This object indicates the direction of flow (subscriber side or network side).
1.3.6.1.4.1.9.9.667.0.2.1.1INTEGER {subscriber(1), network(2)}not-accessiblecurrent
cscAggregativeGlobalControllersAgcId
OBJECT-TYPE
This object indicates an arbitrary integer-value that uniquely identifies an aggregative global controller.
1.3.6.1.4.1.9.9.667.0.2.1.2Unsigned32 (1..4096)not-accessiblecurrent
cscAggregativeGlobalControllersLimit
OBJECT-TYPE
This object specifies the bandwidth limit of an aggregative global controller.
1.3.6.1.4.1.9.9.667.0.2.1.3Gauge32read-writecurrent
cscAggregativeGlobalControllersRate
OBJECT-TYPE
This object specifies the bandwidth rate of an aggregative global controller.
1.3.6.1.4.1.9.9.667.0.2.1.4Gauge32read-writecurrent
cscAggregativeGlobalControllersLinkTable
OBJECT-TYPE
This table provides information regarding the aggregative global controller related configuration per link.
1.3.6.1.4.1.9.9.667.0.3not-accessiblecurrent
cscAggregativeGlobalControllersLinkEntry
OBJECT-TYPE
This entry contains the operational data for the aggregative global controller associated with the service control entity identified by its assigned link number. Each entry uniquely identifies an aggregative global controller by its indices. The link on a service control engine joins subscriber side to network side.
1.3.6.1.4.1.9.9.667.0.3.1not-accessiblecurrent
cscAggregativeGlobalControllersLinkIndex
OBJECT-TYPE
This object indicates an arbitrary integer-value that uniquely identifies a link.
1.3.6.1.4.1.9.9.667.0.3.1.1Unsigned32 (1..100)not-accessiblecurrent
cscAggregativeGlobalControllersLinkSide
OBJECT-TYPE
This object indicates the direction of flow (subscriber side or network side).
1.3.6.1.4.1.9.9.667.0.3.1.2INTEGER {subscriber(1), network(2)}not-accessiblecurrent
cscAggregativeGlobalControllersLinkAgcId
OBJECT-TYPE
This object indicates an arbitrary integer-value that uniquely identifies an aggregative global controller.
1.3.6.1.4.1.9.9.667.0.3.1.3Unsigned32 (1..4096)not-accessiblecurrent
cscAggregativeGlobalControllersLinkEnforcedRate
OBJECT-TYPE
This object specifies the enforced rate which is the rate that each bandwidth controller, primary bandwidth controller seek to attain, taking into account external constraints. The types of external constraint are global controller, physical port, primary bandwidth controller.
1.3.6.1.4.1.9.9.667.0.3.1.4Gauge32read-writecurrent
cscAggregativeGlobalControllersCommittedInformationRate
OBJECT-TYPE
This object specifies the committed information rate which is the aggregate rate that the bandwidth controller is committed to supply to its controlled flows. In all cases, the system will do its utmost to ensure that committed rate is not harmed. This cannot be guaranteed in cases of oversubscription of committed rate in the system as a whole.
1.3.6.1.4.1.9.9.667.0.3.1.5Gauge32read-writecurrent
cscAggregativeGlobalControllersPeakInformationRate
OBJECT-TYPE
This object specifies peak information rate which is the peak aggregate rate of the controlled flows. Aggregate rate means the total bandwidth of all controlled flows.
1.3.6.1.4.1.9.9.667.0.3.1.6Gauge32read-writecurrent
cscAggregativeGlobalControllersAssuranceLevel
OBJECT-TYPE
This object specifies assurance level which is the bandwidth controller strength in the competition over bandwidth in case of congestion. Assured level controls how fast Enforced rate would decrease from peak information rate to committed information rate as congestion builds, or increase from committed information rate to peak information rate as congestion decreases. A higher assured level ensures a higher enforced rate compared to a similar bandwidth controller with a lower assured level.
1.3.6.1.4.1.9.9.667.0.3.1.7Unsigned32 (1..10)read-writecurrent
ciscoServiceControlMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.667.1
ciscoServiceControlMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.667.1.1
ciscoServiceControlMIBObjectGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.667.1.2

Conformance

NameOIDStatus
ciscoServiceControlMIBCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP entities that implement version 1 of the Cisco Service Controller MIB.
1.3.6.1.4.1.9.9.667.1.1.1deprecated
ciscoServiceControlMIBComplianceRev1
MODULE-COMPLIANCE
This compliance statement specifies the minimal requirements an implementation must meet in order to claim full compliance with the definition of the CISCO-SERVICE-CONTROLLER-MIB.
1.3.6.1.4.1.9.9.667.1.1.2current
ciscoServiceControlMIBGlobalControllersObjectGroup
OBJECT-GROUP
This group is a collection of objects that describes the global controllers statistics for service control entity.
1.3.6.1.4.1.9.9.667.1.2.1current
ciscoServiceControlAGCMIBObjectGroups
OBJECT-GROUP
This group is a collection of objects that describes the aggregative global controller for service control entity.
1.3.6.1.4.1.9.9.667.1.2.2current