MIBs Depot

CISCO-SERVICE-CONTROL-RDR-MIB

Registered at
1.3.6.1.4.1.9.9.637
Last updated
2007-08-14 00:00
Organization
Cisco Systems, Inc.
Revisions
2007-08-14 00:00
Namespace
cisco
Source file
CISCO-SERVICE-CONTROL-RDR-MIB
Digest
sha256:4f55f02f0d6ee14d737d0c220c19b4d0b256c0d175dbd0ea44fef244b37845fb

Description

This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a service control entity. The Raw Data Record (RDR) formatter is a component implemented by the service control entity that gathers raw data records produced by the entity and delivers them to external entities as reports. The external entities are called RDR destinations or RDR collectors. The RDR formatter can be configured to send reports to one or multiple destinations. RDR formatter can group RDRs into potentially four categories. RDR mapping to the categories is done by the client application or the user and reflects different logical destinations or purposes. For example the application may map Quota related RDRs to category 1, and Transaction related RDRs to category 2. The user can configure these categories to different destinations and assign them with different priorities. Each category has a separate queue for forwarding the RDRs and has seperate counters for gathering of statistics (sent, dropped, queued etc.). An RDR can belong to any one of the category as chosen by the user or client application. The RDR formatter supports multiple destinations identified by IP address and a port number. Each destination is assigned with a priority for each of the categories. Priority is a number in the range of 1-100, with 100 being the highest priority. The priorities are effective only when the formatter is in forwarding mode 'Redundancy' and are configured during destination configuration (while assigning the destination with categories). For example we have destination A configured with category 1 which is configured with priority 100, destination B configured with category 1 and priority 80 and destination C with category 1 and priority 90. When in redundancy mode the formatter will set the active destination for a category to be the destination with the highest priority. For category 1 the active destination will be A. If destination A goes down then the next destination selected by the formatter as active is destination C.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-excelsior-dev@cisco.com

Imports

FromSymbols
CISCO-SMIciscoMgmt
ENTITY-MIBentPhysicalIndex, entPhysicalName
INET-ADDRESS-MIBInetAddress, InetAddressType, InetPortNumber
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CISCO-SERVICE-CONTROL-RDR-MIB
CISCO-SMI
ENTITY-MIB
IANA-ENTITY-MIB
INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
UUID-TC-MIB

Objects

NameOIDSyntaxAccessStatus
ciscoSCRdrMIBNotifs
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.637.0
ciscoSCRdrMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.637.1
cscRdrFormatterTable
OBJECT-TYPE
This table lists the operational information and aggregated statistics for the RDR formatter of a service control entity.
1.3.6.1.4.1.9.9.637.1.1not-accessiblecurrent
cscRdrFormatterEntry
OBJECT-TYPE
This entry contains the operational data and global counters for the RDR formatter associated with the service control entity identified by its assigned entPhysicalIndex. An entry exists for each corresponding row in the entPhysicalTable having one of the following values assigned to entPhysicalVendorType: - cevChassisSCE2000 - cevChassisSCE1000 - cevNmeApaModule.
1.3.6.1.4.1.9.9.637.1.1.1not-accessiblecurrent
cscRdrFormatterEnable
OBJECT-TYPE
This object specifies whether the RDR formatter is enabled or disabled. When the RDR formatter is enabled, it sends the records it gets from the traffic processors to the RDR destination as defined in the cscRdrDestTable.
1.3.6.1.4.1.9.9.637.1.1.1.1TruthValueread-onlycurrent
cscRdrFormatterNumSentReports
OBJECT-TYPE
This object indicates the number of reports sent by the RDR formatter. Discontinuities in the value of this counter can occur at disabling/enabling of the RDR formatter, and at other times as indicated by the value of cscRdrCounterDiscontinuityTime.
1.3.6.1.4.1.9.9.637.1.1.1.2Counter32read-onlycurrent
cscRdrFormatterNumDiscardedReports
OBJECT-TYPE
This object indicates the number of reports discarded by the RDR formatter due to insufficient resources or unavailibility of the destination. Discontinuities in the value of this counter can occur at disabling/enabling of the RDR formatter, and at other times as indicated by the value of cscRdrCounterDiscontinuityTime.
1.3.6.1.4.1.9.9.637.1.1.1.3Counter32read-onlycurrent
cscRdrFormatterReportRate
OBJECT-TYPE
This object indicates the rate at which the RDR formatter is currently sending reports to all of the destinations.
1.3.6.1.4.1.9.9.637.1.1.1.4Gauge32read-onlycurrent
cscRdrFormatterReportRatePeak
OBJECT-TYPE
This object indicates the maximum rate at which the RDR formatter sent reports to all of the destinations since sysUpTime, if cscRdrCounterDiscontinuityTime is zero. If cscRdrCounterDiscontinuityTime has a non zero value, the maximum rate is determined from this value.
1.3.6.1.4.1.9.9.637.1.1.1.5Gauge32read-onlycurrent
cscRdrFormatterReportRatePeakTime
OBJECT-TYPE
This object indicates the time elapsed since the cscRdrFormatterReportRatePeak value occured.
1.3.6.1.4.1.9.9.637.1.1.1.6TimeTicksread-onlycurrent
cscRdrFormatterProtocol
OBJECT-TYPE
This object specifies the RDR protocol currently used by the RDR formatter. 'other' : The RDR formatter is using a protocol not recognized by this revision of the MIB. 'rdrv1' : RDR protocol version 1 'netflowV9' : NetFlow ver 9
1.3.6.1.4.1.9.9.637.1.1.1.7INTEGER {other(1), rdrv1(2), netflowV9(3)}read-writecurrent
cscRdrFormatterForwardingMode
OBJECT-TYPE
This object specifies the mode by which the RDR formatter sends the reports to its destinations. 'other' : The RDR formatter is using a protocol not recognized by this revision of the MIB. 'redundancy' : The reports are sent to the primary (active destination) and all of the other destinations are in standby. 'simpleLoadBalancing' : The reports are sent to one destination at a time in a round robin manner. 'multicast' : The reports are sent to all of the destinations.
1.3.6.1.4.1.9.9.637.1.1.1.8INTEGER {other(1), redundancy(2), simpleLoadBalancing(3), multicast(4)}read-writecurrent
cscRdrDestTable
OBJECT-TYPE
This table lists the addresses of the configured RDR destination servers and the corresponding connection status for each destination. The RDR formatter sends reports to one or more configured destinations that have a connection to the RDR formatter. This table also shows the current connection status of each destination.
1.3.6.1.4.1.9.9.637.1.2not-accessiblecurrent
cscRdrDestEntry
OBJECT-TYPE
This entry contains the operational data and global counters for a connection between the RDR formatter destination and the RDR formatter associated with the service control entity identified by its assigned entPhysicalIndex. An entry exists for each corresponding row in the entPhysicalTable having one of the following values assigned to entPhysicalVendorType: - cevChassisSCE2000 - cevChassisSCE1000 - cevNmeApaModule. Each connection between RDR formatter and RDR destination is uniquely identified by 'cscRdrDestIndex'.
1.3.6.1.4.1.9.9.637.1.2.1not-accessiblecurrent
cscRdrDestIndex
OBJECT-TYPE
A monotonically increasing integer for the sole purpose of indexing RDR destinations. When it reaches the maximum value the agent flushes the table and wraps the value back to 1.
1.3.6.1.4.1.9.9.637.1.2.1.1Unsigned32 (1..4294967295)not-accessiblecurrent
cscRdrDestInetAddressType
OBJECT-TYPE
This object indicates the type of Internet address by which the RDR destination server is reachable.
1.3.6.1.4.1.9.9.637.1.2.1.2InetAddressTyperead-onlycurrent
cscRdrDestInetAddress
OBJECT-TYPE
This object indicates the RDR destination server IP Address.
1.3.6.1.4.1.9.9.637.1.2.1.3InetAddressread-onlycurrent
cscRdrDestPort
OBJECT-TYPE
This object indicates the port on which the RDR destination server listens.
1.3.6.1.4.1.9.9.637.1.2.1.4InetPortNumberread-onlycurrent
cscRdrDestPriority
OBJECT-TYPE
This object indicates the priority given to the RDR destination server. The RDR formatter determines the priority of a destination by the value of entPhysicalIndex and the RDR category of the destination. RDR formatter assigns the highest priority to the destination which has the same value of entPhysicalIndex and RDR category as that of the RDR formatter. The RDR formatter activates the destination server which is reachable and with the highest priority.
1.3.6.1.4.1.9.9.637.1.2.1.5Integer32 (1..100)read-onlycurrent
cscRdrDestStatus
OBJECT-TYPE
This object indicates the status of this RDR destination. 'other' : None of the following. 'active' : The reports are sent to this destination. 'standby': This destination is a backup. Only one RDR destination can be 'active' if the cscRdrFormatterForwardingMode is set to either 'redundancy' or 'simpleLoadBalancing'. Multiple RDR destinations can be in 'active' state when cscRdrFormatterForwardingMode is set to 'multicast'.
1.3.6.1.4.1.9.9.637.1.2.1.6INTEGER {other(1), active(2), standby(3)}read-onlycurrent
cscRdrDestConnectionStatus
OBJECT-TYPE
This object indicates the status of the connection between the RDR formatter and this destination. 'other' : The connection is in some unknown state. 'up' : The RDR formatter can reach this destination. 'down' : The RDR formatter cannot reach this destination.
1.3.6.1.4.1.9.9.637.1.2.1.7INTEGER {other(1), up(2), down(3)}read-onlycurrent
cscRdrDestNumSentReports
OBJECT-TYPE
This object indicates the number of reports sent by the RDR formatter to this destination. Discontinuities in the value of this counter can occur at disabling/enabling of the RDR formatter, and at other times as indicated by the value of cscRdrCounterDiscontinuityTime.
1.3.6.1.4.1.9.9.637.1.2.1.8Counter32read-onlycurrent
cscRdrDestNumDiscardedReports
OBJECT-TYPE
This object indicates the number of reports dropped by the RDR formatter for this destination. Discontinuities in the value of this counter can occur at disabling/enabling of the RDR formatter, and at other times as indicated by the value of cscRdrCounterDiscontinuityTime.
1.3.6.1.4.1.9.9.637.1.2.1.9Counter32read-onlycurrent
cscRdrDestReportRate
OBJECT-TYPE
This object indicates the rate at which the RDR formatter is currently sending reports to this destinations.
1.3.6.1.4.1.9.9.637.1.2.1.10Gauge32read-onlycurrent
cscRdrCategoryTable
OBJECT-TYPE
This table describes the operational values and aggregated statistics of the different categories of the RDR Formatter.
1.3.6.1.4.1.9.9.637.1.3not-accessiblecurrent
cscRdrCategoryEntry
OBJECT-TYPE
This entry contains the operational data and global counters for a category configured on a RDR formatter of a service control entity identified by the entPhysicalIndex in the ENTITY-MIB with the entPhysicalVendorType set to any of the following values: 'cevChassisSCE2000' 'cevChassisSCE1000' 'cevNmeApaModule'.
1.3.6.1.4.1.9.9.637.1.3.1not-accessiblecurrent
cscRdrCategoryIndex
OBJECT-TYPE
This object indicates the category number, index to the table.
1.3.6.1.4.1.9.9.637.1.3.1.1Unsigned32 (1..4)not-accessiblecurrent
cscRdrCategoryID
OBJECT-TYPE
This object indicates the unique id assigned to this RDR category by the RDR formatter.
1.3.6.1.4.1.9.9.637.1.3.1.2Unsigned32read-onlycurrent
cscRdrCategoryName
OBJECT-TYPE
This object indicates the human readable name assigned to this RDR category by the RDR formatter. The client application provides the RDR formatter with the value of this object.
1.3.6.1.4.1.9.9.637.1.3.1.3SnmpAdminStringread-onlycurrent
cscRdrCategoryNumSentReports
OBJECT-TYPE
This object indicates the number of RDR reports sent over this category. Discontinuities in the value of this counter can occur at disabling/enabling of the RDR formatter, and at other times as indicated by the value of cscRdrCounterDiscontinuityTime.
1.3.6.1.4.1.9.9.637.1.3.1.4Counter32read-onlycurrent
cscRdrCategoryNumDiscardedReports
OBJECT-TYPE
This object indicates the number of RDR reports dropped for this category. Discontinuities in the value of this counter can occur at disabling/enabling of the RDR formatter, and at other times as indicated by the value of cscRdrCounterDiscontinuityTime.
1.3.6.1.4.1.9.9.637.1.3.1.5Counter32read-onlycurrent
cscRdrCategoryReportRate
OBJECT-TYPE
This object indicates the rate at which the RDR formatter is currently sending reports over this category.
1.3.6.1.4.1.9.9.637.1.3.1.6Gauge32read-onlycurrent
cscRdrCategoryNumQueuedReports
OBJECT-TYPE
This object indicates the number of pending RDR reports within this category.
1.3.6.1.4.1.9.9.637.1.3.1.7Gauge32read-onlycurrent
cscRdrCategoryDestTable
OBJECT-TYPE
This table lists the operational data for RDR destination servers for each RDR category for a service control entity.
1.3.6.1.4.1.9.9.637.1.4not-accessiblecurrent
cscRdrCategoryDestEntry
OBJECT-TYPE
This entry contains the operational data for a category of RDR formatter for a destination server of the service control entity identified by the entPhysicalIndex in the ENTITY-MIB with the entPhysicalVendorType set to any of the following values: 'cevChassisSCE2000' 'cevChassisSCE1000' 'cevNmeApaModule'.
1.3.6.1.4.1.9.9.637.1.4.1not-accessiblecurrent
cscRdrCategoryDestPriority
OBJECT-TYPE
This object indicates the priority configured for this category on the RDR destination server. The priority is determined by entPhysicalIndex and the category of the destination server.
1.3.6.1.4.1.9.9.637.1.4.1.1Integer32 (1..100)read-onlycurrent
cscRdrCategoryDestStatus
OBJECT-TYPE
This object indicates the status of this RDR destination for this category. 'other' : None of the following. 'active' : The reports are sent to this destination. 'standby': This destination is a backup. Only one RDR destination can be 'active' if the cscRdrFormatterForwardingMode is set to either 'redundancy' or 'simpleLoadBalancing'. Multiple RDR destinations can be in 'active' state when cscRdrFormatterForwardingMode is set to 'multicast'.
1.3.6.1.4.1.9.9.637.1.4.1.2INTEGER {other(1), active(2), standby(3)}read-onlycurrent
cscRdrNotifsConfig
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.637.1.5
cscRdrReportsEnableNotifs
OBJECT-TYPE
This object controls whether the system produces notifications defined in thi MIB. A 'false' value will prevent the notifications from being generated by this system.
1.3.6.1.4.1.9.9.637.1.5.1TruthValueread-writecurrent
cscRdrCounterDiscontinuityTime
OBJECT-TYPE
The value of service up time on the most recent occasion at which any one or more of the RDR counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
1.3.6.1.4.1.9.9.637.1.6TimeStampread-onlycurrent
ciscoSCRdrMIBConform
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.637.2
cscRdrMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.637.2.1
cscRdrMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.9.9.637.2.2

Notifications

NameOIDStatus
cscRdrCategoryStoppedDiscardingReportsTrap
NOTIFICATION-TYPE
The system generates this notification to indicate that the system has recovered from congestion or unavailibility of the RDR collector identified by the value of cscRdrCategoryID and has stopped discarding reports being sent to this RDR collector.
1.3.6.1.4.1.9.9.637.0.1current
cscRdrCategoryDiscardingReportsTrap
NOTIFICATION-TYPE
The system generates this notification to indicate that the system has either encountered congestion or unavailibility of the RDR collector with the category identified by the value of cscRdrCategoryID and has started discarding reports destined to this collector. The value of cscRdrCategoryNumReportsDiscarded indicates the number of discarded reports.
1.3.6.1.4.1.9.9.637.0.2current
cscRdrNoActiveConnectionTrap
NOTIFICATION-TYPE
The system generates this notification to indicate that there is no active connection between the RDR formatter and any collector.
1.3.6.1.4.1.9.9.637.0.3current
cscRdrConnectionStatusDownTrap
NOTIFICATION-TYPE
The system generates this notification to indicate that a connection to destination has transitioned to the 'down' state.
1.3.6.1.4.1.9.9.637.0.4current
cscRdrActiveConnectionTrap
NOTIFICATION-TYPE
The system generates this notification to indicate that a connection to the destination address cscRdrDestInetAddress has become active on TCP port cscRdrDestPort.
1.3.6.1.4.1.9.9.637.0.5current
cscRdrConnectionStatusUpTrap
NOTIFICATION-TYPE
The system generates this notification to indicate that a connection to the destination address cscRdrDestInetAddress has become transitioned to 'up' state on TCP port cscRdrDestPort.
1.3.6.1.4.1.9.9.637.0.6current

Conformance

NameOIDStatus
cscRdrCompliance
MODULE-COMPLIANCE
The compliance statement for SNMP Agents which implement this MIB.
1.3.6.1.4.1.9.9.637.2.1.1current
cscRdrObjectGroup
OBJECT-GROUP
This group of objects maintains informative data for RDRs.
1.3.6.1.4.1.9.9.637.2.2.1current
cscRdrNotificationGroup
NOTIFICATION-GROUP
This group contains notifications for this MIB.
1.3.6.1.4.1.9.9.637.2.2.2current
cscRdrNotifsControlGroup
OBJECT-GROUP
This is a collection of objects to control the enable/disable state of notification generation.
1.3.6.1.4.1.9.9.637.2.2.3current
cscRdrCounterDiscontinuityGroup
OBJECT-GROUP
A collection of objects providing information specific to RDR counter discontinuities.
1.3.6.1.4.1.9.9.637.2.2.4current