CISCO-QP-LBG-MIB
- Registered at
- 1.3.6.1.4.1.9.9.824
- Last updated
- 2015-09-21 00:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2015-09-21 00:00, 2014-08-27 00:00
- Namespace
- cisco
- Source file
CISCO-QP-LBG-MIB- Digest
sha256:fdde2ac8981d7c2f21d86514f04feb4de08c20ed2fd3a36dd681340160d72cce
Description
This MIB module represents the Qam-Partition (QP) and Load Balance Group (LBG) parameters in the headend and it is supported by an snmp agent. It defines objects for managing both QP and LBG.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-rfgw10@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-SMI | ciscoMgmt |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifDescr |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-QP-LBG-MIB CISCO-SMI ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ciscoQpLbgNotifs OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.824.0 | |||
| ciscoQpLbgObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.824.1 | |||
| cqlqamPartitionTable OBJECT-TYPE This table describes the various parameters of QP such as QP's state, protocol, management IP, server IP, server state, information related to qam and video routes. | 1.3.6.1.4.1.9.9.824.1.1 | not-accessible | current | |
| cqlqamPartitionEntry OBJECT-TYPE Each entry corresponds to the configuration of a QP. | 1.3.6.1.4.1.9.9.824.1.1.1 | not-accessible | current | |
| cqlqpIndex OBJECT-TYPE Table Index. This index uniquely identifies the QP. | 1.3.6.1.4.1.9.9.824.1.1.1.1 | Unsigned32 | not-accessible | current |
| cqlqpId OBJECT-TYPE This object specifies the QP Id. | 1.3.6.1.4.1.9.9.824.1.1.1.2 | Unsigned32 | read-only | current |
| cqlqpMgmtIpAddrType OBJECT-TYPE The type of the Management address as defined inetAddressType. The supported address types are IPv4 and IPv6. | 1.3.6.1.4.1.9.9.824.1.1.1.3 | InetAddressType | read-only | current |
| cqlqpMgmtIp OBJECT-TYPE This object specifies the Management IP address of a QP. | 1.3.6.1.4.1.9.9.824.1.1.1.4 | InetAddress | read-only | current |
| cqlqpServerIpAddrType OBJECT-TYPE The type of the Server address as defined inetAddressType. The supported address types are IPv4 and IPv6. | 1.3.6.1.4.1.9.9.824.1.1.1.5 | InetAddressType | read-only | current |
| cqlqpServerIp OBJECT-TYPE Server IP of the QP. | 1.3.6.1.4.1.9.9.824.1.1.1.6 | InetAddress | read-only | current |
| cqlqpState OBJECT-TYPE This object specifies the state of the QP. The following are the valid states. inactive(1) QP is in inactive state. init(2) QP is in init state. active(3) QP is in active state. | 1.3.6.1.4.1.9.9.824.1.1.1.7 | INTEGER {inactive(1), init(2), active(3)} | read-only | current |
| cqlqpProtocol OBJECT-TYPE This object specifies the QP Protocol. Gqi(1) Ermi(2) | 1.3.6.1.4.1.9.9.824.1.1.1.8 | INTEGER {gqi(1), ermi(2)} | read-only | current |
| cqlqpKeepAliveTime OBJECT-TYPE This object specifies the keepalive timer in seconds for a QP. | 1.3.6.1.4.1.9.9.824.1.1.1.9 | Unsigned32 | read-only | current |
| cqlqpServerState OBJECT-TYPE This object specifies the Server state of the QP. disconnected(1) Server is in disconnected state. connected(2) Server is in connected state. | 1.3.6.1.4.1.9.9.824.1.1.1.10 | INTEGER {disconnected(1), connected(2)} | read-only | current |
| cqlqpGqiMacAddr OBJECT-TYPE This object specifies the MAC address of a QP, applicable only for GQI Protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.11 | MacAddress | read-only | current |
| cqlqpGqiResetInterval OBJECT-TYPE This object specifies Reset interval for a QP. It is applicable only for GQI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.12 | Unsigned32 | read-only | current |
| cqlqpNumQams OBJECT-TYPE The total number of qams associated with the QP. | 1.3.6.1.4.1.9.9.824.1.1.1.13 | Unsigned32 | read-only | current |
| cqlqpQamCarrrierList OBJECT-TYPE This object specifies the list of Qam carriers associated with the QP. | 1.3.6.1.4.1.9.9.824.1.1.1.14 | OCTET STRING | read-only | current |
| cqlqpNumRoutes OBJECT-TYPE The total number of routes associated with the QP. | 1.3.6.1.4.1.9.9.824.1.1.1.15 | Unsigned32 | read-only | current |
| cqlqpRouteDetails OBJECT-TYPE Route details of the QP. It includes the configured IP and also the highest and lowest UDP range. | 1.3.6.1.4.1.9.9.824.1.1.1.16 | OCTET STRING | read-only | current |
| cqlqpErmiErrpComponentName OBJECT-TYPE Component Name for the QP, applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.17 | OCTET STRING | read-only | current |
| cqlqpErmiErrpStreamingZone OBJECT-TYPE Streaming zone for the QP, applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.18 | OCTET STRING | read-only | current |
| cqlqpErmiErrpHoldTime OBJECT-TYPE Hold Time in seconds for the QP, applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.19 | Unsigned32 | read-only | current |
| cqlqpErmiErrpConnnectTime OBJECT-TYPE Connect Time in seconds for the QP, applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.20 | Unsigned32 | read-only | current |
| cqlqpErmiErrpConnectRetry OBJECT-TYPE Connection retry in seconds for the QP. It is applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.21 | Unsigned32 | read-only | current |
| cqlqpErmiRtspConnectTime OBJECT-TYPE Connect time in seconds for the QP. It is applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.22 | Unsigned32 | read-only | current |
| cqlqpErmiRtspConnectRetry OBJECT-TYPE Connect retry in seconds for the QP, applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.23 | Unsigned32 | read-only | current |
| cqlqpErmiRtspKeepAliveTime OBJECT-TYPE Connection timeout in seconds for the QP. It is applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.24 | Unsigned32 | read-only | current |
| cqlqpErmiRtspSessionTimeout OBJECT-TYPE Session Timeout in seconds for the QP. It is applicable only for ERMI protocol. | 1.3.6.1.4.1.9.9.824.1.1.1.25 | Unsigned32 | read-only | current |
| cqlqpQamOversubscribedStatus OBJECT-TYPE This object specifies oversubscription status of a Qam. The value 'True' indicates the Qam is oversubscribed. Otherwise the value 'False' is reported. | 1.3.6.1.4.1.9.9.824.1.1.1.26 | TruthValue | read-only | current |
| cqlqpServerIpList OBJECT-TYPE List of Server IP's for the QP. | 1.3.6.1.4.1.9.9.824.1.1.1.27 | OCTET STRING | read-only | current |
| cqlloadBalanceGroupTable OBJECT-TYPE This table describes the total bandwidth and the reserved bandwidth of QAM/IP based sessions. | 1.3.6.1.4.1.9.9.824.1.2 | not-accessible | current | |
| cqlloadBalanceGroupEntry OBJECT-TYPE Each entry corresponds to the parameters of a LBG. | 1.3.6.1.4.1.9.9.824.1.2.1 | not-accessible | current | |
| cqllbgIndex OBJECT-TYPE This index is to identify the LBG group within the slot. | 1.3.6.1.4.1.9.9.824.1.2.1.1 | Unsigned32 | not-accessible | current |
| cqllbgTotalBandwidth OBJECT-TYPE This object specifies the total bandwidth in Kbps of a LBG. | 1.3.6.1.4.1.9.9.824.1.2.1.2 | Unsigned32 | read-only | current |
| cqllbgQamRsvBandwidth OBJECT-TYPE This object specifies the total reserved bandwidth in Kbps for depi sessions. | 1.3.6.1.4.1.9.9.824.1.2.1.3 | Unsigned32 | read-only | current |
| cqllbgIpRsvBandwidth OBJECT-TYPE This object specifies the total reserved bandwidth in Kbps for video sessions. | 1.3.6.1.4.1.9.9.824.1.2.1.4 | Unsigned32 | read-only | current |
| cqllbgAvailableBandwidth OBJECT-TYPE This object specifies the available bandwidth in Kbps. This may be calculated as (TotalBandwidth - (QamRsvBandwidth + IpRsvBandwith)). | 1.3.6.1.4.1.9.9.824.1.2.1.5 | Unsigned32 | read-only | current |
| cqllbgrouteTable OBJECT-TYPE This table describes the route parameters such as QP id,destination ip, low and high udp range, reserved and allocated bandwidth. | 1.3.6.1.4.1.9.9.824.1.3 | not-accessible | current | |
| cqllbgrouteEntry OBJECT-TYPE Each entry corresponds to the parameters of a route. | 1.3.6.1.4.1.9.9.824.1.3.1 | not-accessible | current | |
| cqllbgRouteIndex OBJECT-TYPE The table index. This is the index which uniquely identifies the route within the LBG group. | 1.3.6.1.4.1.9.9.824.1.3.1.1 | Unsigned32 | not-accessible | current |
| cqllbgQpId OBJECT-TYPE This object specifies the QP ID. The range of the QP is between 1 and 50. | 1.3.6.1.4.1.9.9.824.1.3.1.2 | Unsigned32 | read-only | current |
| cqllbgDstIpAddrType OBJECT-TYPE The type of the destination address as defined inetAddressType. The supported address types are IPv4 and IPv6. | 1.3.6.1.4.1.9.9.824.1.3.1.3 | InetAddressType | read-only | current |
| cqllbgDstIpAddr OBJECT-TYPE Destination IP address of the route to which the incoming packets are routed to. | 1.3.6.1.4.1.9.9.824.1.3.1.4 | InetAddress | read-only | current |
| cqllbgUdpPortRangeMin OBJECT-TYPE The lowest UDP port of the UDP port range that can be used. | 1.3.6.1.4.1.9.9.824.1.3.1.5 | Unsigned32 | read-only | current |
| cqllbgUdpPortRangeMax OBJECT-TYPE The highest UDP port of the UDP port range that can be used. | 1.3.6.1.4.1.9.9.824.1.3.1.6 | Unsigned32 | read-only | current |
| cqllbgGqiIngressPort OBJECT-TYPE Ingress port of a QP, applicable only for GQI protocol. | 1.3.6.1.4.1.9.9.824.1.3.1.7 | Unsigned32 | read-only | current |
| cqllbgRsvBandwidth OBJECT-TYPE Reserved bandwidth is the total bitrate reserved on this route in Kbps. | 1.3.6.1.4.1.9.9.824.1.3.1.8 | Unsigned32 | read-only | current |
| cqllbgAllocatedBandwidth OBJECT-TYPE The total bandwidth being used by sessions using this route in Kbps. | 1.3.6.1.4.1.9.9.824.1.3.1.9 | Unsigned32 | read-only | current |
| cqllbgNumFlows OBJECT-TYPE Number of sessions currently use this route to forward this traffic in Kbps. | 1.3.6.1.4.1.9.9.824.1.3.1.10 | Unsigned32 | read-only | current |
| cqlQpNotifyEnable OBJECT-TYPE This object specifies whether the system generates cqlQpStateChange notifications. A false value will prevent cqlQpStateChange notifications from being generated by this system. | 1.3.6.1.4.1.9.9.824.1.4 | TruthValue | read-write | current |
| cqlQamNotifyEnable OBJECT-TYPE This object specifies whether the system generates cqlQamAdd or cqlQamDelete notifications. A false value will prevent cqlQamAdd or cqlQamDelete notifications from being generated by this system. | 1.3.6.1.4.1.9.9.824.1.5 | TruthValue | read-write | current |
| cqlRouteNotifyEnable OBJECT-TYPE This object specifies whether the system produces cqlRouteAdd or cqlRouteDelete notifications. A false value will prevent cqlRouteAdd or cqlRouteDelete notifications from being generated by this system. | 1.3.6.1.4.1.9.9.824.1.6 | TruthValue | read-write | current |
| cqlQamOverSubscribedEnable OBJECT-TYPE This object specifies whether the system produces cqlQamOverSubscribedAlert notifications. A false value will prevent cqlQamOverSubscribedAlert notifications from being generated by the system. | 1.3.6.1.4.1.9.9.824.1.7 | TruthValue | read-write | current |
| ciscoQpLbgConform OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.824.2 | |||
| ciscoQpLbgCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.824.2.1 | |||
| ciscoQpLbgGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.9.824.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cqlQpStateChange NOTIFICATION-TYPE The device generates this notification when a QP state has changed and the value of cqlQpNotifyEnable is 'true'. | 1.3.6.1.4.1.9.9.824.0.1 | current |
| cqlQamAdd NOTIFICATION-TYPE The device generates this notification when a qam has been added to QP and the value of cqlQamNotifyEnable is 'true'. | 1.3.6.1.4.1.9.9.824.0.2 | current |
| cqlQamDelete NOTIFICATION-TYPE The device generates this notification when a qam has been deleted from QP and the value of cqlQamNotifyEnable is 'true'. | 1.3.6.1.4.1.9.9.824.0.3 | current |
| cqlLbgRouteAdd NOTIFICATION-TYPE The device generates this notification when a route has been added to QP and the value of cqlRouteNotifyEnable is 'true'. | 1.3.6.1.4.1.9.9.824.0.4 | current |
| cqlLbgRouteDelete NOTIFICATION-TYPE The device generates this notification when a route has been deleted from QP and the value of cqlRouteNotifyEnable is 'true'. | 1.3.6.1.4.1.9.9.824.0.5 | current |
| cqlQamOverSubscribedAlert NOTIFICATION-TYPE The device generates this notification when a qam has been oversubscribed or cleared. This will be enabled when the object cqlQamOverSubscribedEnable is set to 'true'. | 1.3.6.1.4.1.9.9.824.0.6 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| cqlciscoQpLbgCompliance MODULE-COMPLIANCE These objects describe the support level for QP and LBG. | 1.3.6.1.4.1.9.9.824.2.1.1 | deprecated |
| cqlciscoQpLbgCompliance1 MODULE-COMPLIANCE These objects describe the support level for QP and LBG. | 1.3.6.1.4.1.9.9.824.2.1.2 | current |
| cqlciscoQpNotifsGroup NOTIFICATION-GROUP A collection of QP notifications that may optionally be implemented. cqlciscoQpNotifsGroup object is superseded by cqlciscoQpNotifsGroup1. | 1.3.6.1.4.1.9.9.824.2.2.1 | deprecated |
| cqlciscoLbgNotifsGroup NOTIFICATION-GROUP A collection of LBG notifications that may optionally be implemented. | 1.3.6.1.4.1.9.9.824.2.2.2 | current |
| cqlciscoQpObjectGroup OBJECT-GROUP A collection of objects providing information about the QP parameters. cqlciscoQpObjectGroup object is superseded by cqlciscoQpObjectGroup1. | 1.3.6.1.4.1.9.9.824.2.2.3 | deprecated |
| cqlciscoLbgObjectGroup OBJECT-GROUP A collection of objects providing information about the LBG parameters. | 1.3.6.1.4.1.9.9.824.2.2.4 | current |
| cqlciscoLbgRouteObjectGroup OBJECT-GROUP A collection of objects providing information about the LBG route parameters. | 1.3.6.1.4.1.9.9.824.2.2.5 | current |
| cqlciscoQpLbgNotifsControlGroup OBJECT-GROUP A collection of objects providing information about the notification enables. cqlciscoQpLbgNotifsControlGroup object is superseded by cqlciscoQpLbgNotifsControlGroup1. | 1.3.6.1.4.1.9.9.824.2.2.6 | deprecated |
| cqlciscoQpNotifsGroup1 NOTIFICATION-GROUP A collection of QP notifications that may optionally be implemented. | 1.3.6.1.4.1.9.9.824.2.2.7 | current |
| cqlciscoQpObjectGroup1 OBJECT-GROUP A collection of objects providing information about the QP parameters. | 1.3.6.1.4.1.9.9.824.2.2.8 | current |
| cqlciscoQpLbgNotifsControlGroup1 OBJECT-GROUP A collection of objects providing information about the notification enables. | 1.3.6.1.4.1.9.9.824.2.2.9 | current |