CISCO-IETF-PW-MIB
- Registered at
- 1.3.6.1.4.1.9.10.106
- Last updated
- 2004-03-17 12:00
- Organization
- Cisco Systems, Inc.
- Revisions
- 2004-03-17 12:00, 2003-02-26 12:00, 2002-05-26 12:00, 2002-01-30 12:00, 2001-11-07 12:00, 2001-07-11 12:00
- Namespace
- cisco
- Source file
CISCO-IETF-PW-MIB- Digest
sha256:4ac746d752272b0244b51c8035998b7ef3f9d975b6567723abe172718cb99857
Description
This MIB contains managed object definitions for Pseudo Wire operation as in: Pate, P., et al, <draft-ietf-pwe3- framework>, Xiao, X., et al, <draft-ietf-pwe3- requirements>, Martini, L., et al, <draft-martini- l2circuit-trans-mpls>, and Martini, L., et al, <draft-martini-l2circuit-encap-mpls>. The indexes for this MIB are also used to index the PSN- specific tables and the VC-specific tables. The VC Type dictates which VC-specific MIB to use. For example, a 'cep' VC Type requires the use the configuration and status tables within the CEP-MIB. This MIB enable the use of any underlying packet switched network (PSN). Specific tables for the MPLS PSN is currently defined in a separate CISCO-IETF-PW-MPLS-MIB. Tables to support other PSNs (IP, L2TP for example) will be added to this MIB in future revisions. At the time of publication of this version, there are no PWE3 WG documents for all features and objects in this MIB, and the MIB is therefore subject to change based on the WG progress.
Contact
Thomas D. Nadeau Postal: Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01824 Tel: +1-978-497-3051 Email: tnadeau@cisco.com MPLS MIB Development Team Postal: Cisco Systems, Inc. 250 Apollo Drive Chelmsford, MA 01924 Tel: +1-978-497-3989 Email: ch-mpls-mib-dev@cisco.com
Imports
| From | Symbols |
|---|---|
| CISCO-IETF-PW-TC-MIB | CpwGroupID, CpwOperStatus, CpwVcIDType, CpwVcIndexType, CpwVcType |
| CISCO-SMI | ciscoExperiment |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, experimental, iso |
| SNMPv2-TC | DisplayString, RowStatus, StorageType, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
4 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CISCO-IETF-PW-MIB CISCO-IETF-PW-TC-MIB CISCO-SMI INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cpwVcObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.106.1 | |||
| cpwVcIndexNext OBJECT-TYPE This object contains an appropriate value to be used for cpwVcIndex when creating entries in the cpwVcTable. The value 0 indicates that no unassigned entries are available. To obtain the value of cpwVcIndex for a new entry in the cpwVcTable, the manager issues a management protocol retrieval operation to obtain the current value of cpwVcIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | 1.3.6.1.4.1.9.10.106.1.1 | Unsigned32 | read-only | current |
| cpwVcTable OBJECT-TYPE This table specifies information for connecting various emulated services to various tunnel type. | 1.3.6.1.4.1.9.10.106.1.2 | not-accessible | current | |
| cpwVcEntry OBJECT-TYPE A row in this table represents an emulated virtual connection (VC) across a packet network. It is indexed by cpwVcIndex, which uniquely identifying a singular connection. | 1.3.6.1.4.1.9.10.106.1.2.1 | not-accessible | current | |
| cpwVcIndex OBJECT-TYPE Index for the conceptual row identifying a VC within this PW Emulation VC table. | 1.3.6.1.4.1.9.10.106.1.2.1.1 | CpwVcIndexType | not-accessible | current |
| cpwVcType OBJECT-TYPE This value indicate the service to be carried over this VC. Note: the exact set of VC types is yet to be worked out by the WG. | 1.3.6.1.4.1.9.10.106.1.2.1.2 | CpwVcType | read-create | current |
| cpwVcOwner OBJECT-TYPE Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no maintenance protocol (PW signaling) is used to set-up the VC, i.e. require configuration of entries in the VC tables including VC labels, etc. The value 'maintenanceProtocol' is used in case of standard signaling of the VC for the specific PSN, for example LDP for MPLS PSN as specified in <draft- draft-martini- l2circuit-trans-mpls> or L2TP control protocol. Value 'other' is used for other types of signaling. | 1.3.6.1.4.1.9.10.106.1.2.1.3 | INTEGER {manual(1), maintenanceProtocol(2), other(3)} | read-create | current |
| cpwVcPsnType OBJECT-TYPE Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. For example, if mpls(1) is defined, the agent create an entry in cpwVcMplsTable, which further define the MPLS PSN configuration. Note: the exact set of PSN types is yet to be worked out by the WG. | 1.3.6.1.4.1.9.10.106.1.2.1.4 | INTEGER {mpls(1), l2tp(2), ip(3), mplsOverIp(4), gre(5), other(6)} | read-create | current |
| cpwVcSetUpPriority OBJECT-TYPE This object define the relative set-up priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal priority. Dropped VC will be set 'dormant' (as indicated in cpwVcOperStatus). This value is significant if there are competing resources between VCs and the implementation support this feature. If not supported or not relevant, the value of zero MUST be used. | 1.3.6.1.4.1.9.10.106.1.2.1.5 | Integer32 (0..7) | read-create | current |
| cpwVcHoldingPriority OBJECT-TYPE This object define the relative holding priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal priority. Dropped VC will be set 'dormant' (as indicated in cpwVcOperStatus). This value is significant if there are competing resources between VCs and the implementation support this feature. If not supported or not relevant, the value of zero MUST be used. | 1.3.6.1.4.1.9.10.106.1.2.1.6 | Integer32 (0..7) | read-create | current |
| cpwVcInboundMode OBJECT-TYPE This object is used to enable greater security for implementation that use per platform VC label space. In strict mode, packets coming from the PSN are accepted only from tunnels that are associated to the same VC via the inbound tunnel table in the case of MPLS, or as identified by the source IP address in case of L2TP or IP PSN. The entries in the inbound tunnel table are either explicitly configured or implicitly known by the maintenance protocol used for VC set-up. If such association is not known, not configured or not desired, loose mode should be configured, and the node should accept the packet based on the VC label only regardless of the outer tunnel used to carry the VC. | 1.3.6.1.4.1.9.10.106.1.2.1.7 | INTEGER {loose(1), strict(2)} | read-create | current |
| cpwVcPeerAddrType OBJECT-TYPE Denotes the address type of the peer node maintenance protocol (signaling) address if PW maintenance protocol is used for the VC creation. It should be set to 'unknown' if PE/PW maintenance protocol is not used, i.e. cpwVcOwner is set to 'manual'. | 1.3.6.1.4.1.9.10.106.1.2.1.8 | InetAddressType | read-create | current |
| cpwVcPeerAddr OBJECT-TYPE This object contains the value of of the peer node address of the PW/PE maintenance protocol entity. This object should contain a value of 0 if not relevant (manual configuration of the VC). | 1.3.6.1.4.1.9.10.106.1.2.1.9 | InetAddress | read-create | current |
| cpwVcID OBJECT-TYPE Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP. | 1.3.6.1.4.1.9.10.106.1.2.1.10 | CpwVcIDType | read-create | current |
| cpwVcLocalGroupID OBJECT-TYPE Used in the Group ID field sent to the peer PWES within the maintenance protocol used for VC setup, zero if not used. | 1.3.6.1.4.1.9.10.106.1.2.1.11 | CpwGroupID | read-create | current |
| cpwVcControlWord OBJECT-TYPE Define if the control word will be sent with each packet by the local node. | 1.3.6.1.4.1.9.10.106.1.2.1.12 | TruthValue | read-create | current |
| cpwVcLocalIfMtu OBJECT-TYPE If not equal zero, the optional IfMtu object in the maintenance protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the VC. | 1.3.6.1.4.1.9.10.106.1.2.1.13 | Unsigned32 (0..65535) | read-create | current |
| cpwVcLocalIfString OBJECT-TYPE Each VC is associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the maintenance protocol will send the interface's name as appears on the ifTable in the name object as part of the maintenance protocol. If set to false, the optional element will not be sent. | 1.3.6.1.4.1.9.10.106.1.2.1.14 | TruthValue | read-create | current |
| cpwVcRemoteGroupID OBJECT-TYPE Obtained from the Group ID field as received via the maintenance protocol used for VC setup, zero if not used. Value of 0xFFFF shall be used if the object is yet to be defined by the VC maintenance protocol. | 1.3.6.1.4.1.9.10.106.1.2.1.15 | CpwGroupID | read-only | current |
| cpwVcRemoteControlWord OBJECT-TYPE If maintenance protocol is used for VC establishment, this parameter indicates the received status of the control word usage, i.e. if packets will be received with control word or not. The value of 'notYetKnown' is used while the maintenance protocol has not yet received the indication from the remote node. In manual configuration of the VC this parameters indicate to the local node what is the expected encapsulation for the received packets. | 1.3.6.1.4.1.9.10.106.1.2.1.16 | INTEGER {noControlWord(1), withControlWord(2), notYetKnown(3)} | read-create | current |
| cpwVcRemoteIfMtu OBJECT-TYPE The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. Should be zero if this parameter is not available or not used. | 1.3.6.1.4.1.9.10.106.1.2.1.17 | Unsigned32 | read-only | current |
| cpwVcRemoteIfString OBJECT-TYPE Indicate the interface description string as received by the maintenance protocol, MUST be NULL string if not applicable or not known yet. | 1.3.6.1.4.1.9.10.106.1.2.1.18 | SnmpAdminString (SIZE(0..80)) | read-only | current |
| cpwVcOutboundVcLabel OBJECT-TYPE The VC label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF. | 1.3.6.1.4.1.9.10.106.1.2.1.19 | Unsigned32 | read-create | current |
| cpwVcInboundVcLabel OBJECT-TYPE The VC label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP it represent the 32 bits Session ID. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF. | 1.3.6.1.4.1.9.10.106.1.2.1.20 | Unsigned32 | read-create | current |
| cpwVcName OBJECT-TYPE The canonical name assigned to the VC. | 1.3.6.1.4.1.9.10.106.1.2.1.21 | SnmpAdminString | read-create | current |
| cpwVcDescr OBJECT-TYPE A textual string containing information about the VC. If there is no description this object contains a zero length string. | 1.3.6.1.4.1.9.10.106.1.2.1.22 | SnmpAdminString | read-create | current |
| cpwVcCreateTime OBJECT-TYPE System time when this VC was created. | 1.3.6.1.4.1.9.10.106.1.2.1.23 | TimeStamp | read-only | current |
| cpwVcUpTime OBJECT-TYPE Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in cpwVcOperStatus.) | 1.3.6.1.4.1.9.10.106.1.2.1.24 | TimeTicks | read-only | current |
| cpwVcAdminStatus OBJECT-TYPE The desired operational status of this VC. | 1.3.6.1.4.1.9.10.106.1.2.1.25 | INTEGER {up(1), down(2), testing(3)} | read-create | current |
| cpwVcOperStatus OBJECT-TYPE Indicates the actual combined operational status of this VC. It is 'up' if both cpwVcInboundOperStatus and cpwVcOutboundOperStatus are in 'up' state. For all other values, if the VCs in both directions are of the same value it reflects that value, otherwise it is set to the most severe status out of the two statuses. The order of severance from most severe to less severe is: unknown, notPresent, down, lowerLayerDown, dormant, testing, up. The operator may consult the per direction OperStatus for fault isolation per direction. | 1.3.6.1.4.1.9.10.106.1.2.1.26 | CpwOperStatus | read-only | current |
| cpwVcInboundOperStatus OBJECT-TYPE Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'. | 1.3.6.1.4.1.9.10.106.1.2.1.27 | CpwOperStatus | read-only | current |
| cpwVcOutboundOperStatus OBJECT-TYPE Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'. | 1.3.6.1.4.1.9.10.106.1.2.1.28 | CpwOperStatus | read-only | current |
| cpwVcTimeElapsed OBJECT-TYPE The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. | 1.3.6.1.4.1.9.10.106.1.2.1.29 | Integer32 (1..900) | read-only | current |
| cpwVcValidIntervals OBJECT-TYPE The number of previous 15-minute intervals for which data was collected. An agent with PW capability must be capable of supporting at least n intervals. The minimum value of n is 4, The default of n is 32 and the maximum value of n is 96. The value will be <n> unless the measurement was (re-) started within the last (<n>*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. | 1.3.6.1.4.1.9.10.106.1.2.1.30 | Integer32 (0..96) | read-only | current |
| cpwVcRowStatus OBJECT-TYPE For creating, modifying, and deleting this row. | 1.3.6.1.4.1.9.10.106.1.2.1.31 | RowStatus | read-create | current |
| cpwVcStorageType OBJECT-TYPE This variable indicates the storage type for this object. | 1.3.6.1.4.1.9.10.106.1.2.1.32 | StorageType | read-create | current |
| cpwVcPerfCurrentTable OBJECT-TYPE This table provides per-VC performance information for the current interval. | 1.3.6.1.4.1.9.10.106.1.3 | not-accessible | current | |
| cpwVcPerfCurrentEntry OBJECT-TYPE An entry in this table is created by the agent for every VC. | 1.3.6.1.4.1.9.10.106.1.3.1 | not-accessible | current | |
| cpwVcPerfCurrentInHCPackets OBJECT-TYPE High capacity counter for number of packets received by the VC (from the PSN) in the current 15 minute interval. | 1.3.6.1.4.1.9.10.106.1.3.1.1 | Counter64 | read-only | current |
| cpwVcPerfCurrentInHCBytes OBJECT-TYPE High capacity counter for number of bytes received by the VC (from the PSN) in the current 15 minute interval. | 1.3.6.1.4.1.9.10.106.1.3.1.2 | Counter64 | read-only | current |
| cpwVcPerfCurrentOutHCPackets OBJECT-TYPE High capacity counter for number of packets forwarded by the VC (to the PSN) in the current 15 minute interval. | 1.3.6.1.4.1.9.10.106.1.3.1.3 | Counter64 | read-only | current |
| cpwVcPerfCurrentOutHCBytes OBJECT-TYPE High capacity counter for number of bytes forwarded by the VC (to the PSN) in the current 15 minute interval. | 1.3.6.1.4.1.9.10.106.1.3.1.4 | Counter64 | read-only | current |
| cpwVcPerfIntervalTable OBJECT-TYPE This table provides per-VC performance information for each interval. | 1.3.6.1.4.1.9.10.106.1.4 | not-accessible | current | |
| cpwVcPerfIntervalEntry OBJECT-TYPE An entry in this table is created agent for every VC. | 1.3.6.1.4.1.9.10.106.1.4.1 | not-accessible | current | |
| cpwVcPerfIntervalNumber OBJECT-TYPE A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. The minimum range of N is 1 through 4. The default range is 1 to 32. The maximum range of N is 1 through 96. | 1.3.6.1.4.1.9.10.106.1.4.1.1 | Integer32 (1..96) | not-accessible | current |
| cpwVcPerfIntervalValidData OBJECT-TYPE This variable indicates if the data for this interval is valid. | 1.3.6.1.4.1.9.10.106.1.4.1.2 | TruthValue | read-only | current |
| cpwVcPerfIntervalTimeElapsed OBJECT-TYPE The duration of a particular interval in seconds. Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than the normal value. Therefore this actual interval value is provided. | 1.3.6.1.4.1.9.10.106.1.4.1.3 | Integer32 | read-only | current |
| cpwVcPerfIntervalInHCPackets OBJECT-TYPE High capacity counter for number of packets received by the VC (from the PSN) in a particular 15-minute interval. | 1.3.6.1.4.1.9.10.106.1.4.1.4 | Counter64 | read-only | current |
| cpwVcPerfIntervalInHCBytes OBJECT-TYPE High capacity counter for number of bytes received by the VC (from the PSN) in a particular 15-minute interval. | 1.3.6.1.4.1.9.10.106.1.4.1.5 | Counter64 | read-only | current |
| cpwVcPerfIntervalOutHCPackets OBJECT-TYPE High capacity counter for number of packets forwarded by the VC (to the PSN) in a particular 15-minute interval. | 1.3.6.1.4.1.9.10.106.1.4.1.6 | Counter64 | read-only | current |
| cpwVcPerfIntervalOutHCBytes OBJECT-TYPE High capacity counter for number of bytes forwarded by the VC (to the PSN) in a particular 15-minute interval. | 1.3.6.1.4.1.9.10.106.1.4.1.7 | Counter64 | read-only | current |
| cpwVcPerfTotalTable OBJECT-TYPE This table provides per-VC Performance information from VC start time. | 1.3.6.1.4.1.9.10.106.1.5 | not-accessible | current | |
| cpwVcPerfTotalEntry OBJECT-TYPE An entry in this table is created agent for every VC. | 1.3.6.1.4.1.9.10.106.1.5.1 | not-accessible | current | |
| cpwVcPerfTotalInHCPackets OBJECT-TYPE High capacity counter for number of packets received by the VC (from the PSN). | 1.3.6.1.4.1.9.10.106.1.5.1.1 | Counter64 | read-only | current |
| cpwVcPerfTotalInHCBytes OBJECT-TYPE High capacity counter for number of bytes received by the VC (from the PSN). | 1.3.6.1.4.1.9.10.106.1.5.1.2 | Counter64 | read-only | current |
| cpwVcPerfTotalOutHCPackets OBJECT-TYPE High capacity counter for number of packets forwarded by the VC (to the PSN). | 1.3.6.1.4.1.9.10.106.1.5.1.3 | Counter64 | read-only | current |
| cpwVcPerfTotalOutHCBytes OBJECT-TYPE High capacity counter for number of bytes forwarded by the VC (to the PSN). | 1.3.6.1.4.1.9.10.106.1.5.1.4 | Counter64 | read-only | current |
| cpwVcPerfTotalDiscontinuityTime OBJECT-TYPE The value of sysUpTime on the most recent occasion at which any one or more of this row Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. | 1.3.6.1.4.1.9.10.106.1.5.1.5 | TimeStamp | read-only | current |
| cpwVcPerfTotalErrorPackets OBJECT-TYPE Counter for number of error at VC level processing, for example packets received with unknown VC label. | 1.3.6.1.4.1.9.10.106.1.6 | Counter64 | read-only | current |
| cpwVcIdMappingTable OBJECT-TYPE This table provides reverse mapping of the existing VCs based on vc type and VC ID ordering. This table is typically useful for EMS ordered query of existing VCs. | 1.3.6.1.4.1.9.10.106.1.7 | not-accessible | current | |
| cpwVcIdMappingEntry OBJECT-TYPE An entry in this table is created by the agent for every VC configured by the cpwVcTable. | 1.3.6.1.4.1.9.10.106.1.7.1 | not-accessible | current | |
| cpwVcIdMappingVcType OBJECT-TYPE The VC type (indicate the service) of this VC. | 1.3.6.1.4.1.9.10.106.1.7.1.1 | CpwVcType | not-accessible | current |
| cpwVcIdMappingVcID OBJECT-TYPE The VC ID of this VC. Zero if the VC is configured manually. | 1.3.6.1.4.1.9.10.106.1.7.1.2 | CpwVcIDType | not-accessible | current |
| cpwVcIdMappingPeerAddrType OBJECT-TYPE IP address type of the peer node. | 1.3.6.1.4.1.9.10.106.1.7.1.3 | InetAddressType | not-accessible | current |
| cpwVcIdMappingPeerAddr OBJECT-TYPE IP address type of the peer node. | 1.3.6.1.4.1.9.10.106.1.7.1.4 | InetAddress | not-accessible | current |
| cpwVcIdMappingVcIndex OBJECT-TYPE The value that represent the VC in the cpwVcTable. | 1.3.6.1.4.1.9.10.106.1.7.1.5 | CpwVcIndexType | read-only | current |
| cpwVcPeerMappingTable OBJECT-TYPE This table provides reverse mapping of the existing VCs based on vc type and VC ID ordering. This table is typically useful for EMS ordered query of existing VCs. | 1.3.6.1.4.1.9.10.106.1.8 | not-accessible | current | |
| cpwVcPeerMappingEntry OBJECT-TYPE An entry in this table is created by the agent for every VC configured in cpwVcTable. | 1.3.6.1.4.1.9.10.106.1.8.1 | not-accessible | current | |
| cpwVcPeerMappingPeerAddrType OBJECT-TYPE IP address type of the peer node. | 1.3.6.1.4.1.9.10.106.1.8.1.1 | InetAddressType | not-accessible | current |
| cpwVcPeerMappingPeerAddr OBJECT-TYPE IP address type of the peer node. | 1.3.6.1.4.1.9.10.106.1.8.1.2 | InetAddress | not-accessible | current |
| cpwVcPeerMappingVcType OBJECT-TYPE The VC type (indicate the service) of this VC. | 1.3.6.1.4.1.9.10.106.1.8.1.3 | CpwVcType | not-accessible | current |
| cpwVcPeerMappingVcID OBJECT-TYPE The VC ID of this VC. Zero if the VC is configured manually. | 1.3.6.1.4.1.9.10.106.1.8.1.4 | CpwVcIDType | not-accessible | current |
| cpwVcPeerMappingVcIndex OBJECT-TYPE The value that represent the VC in the cpwVcTable. | 1.3.6.1.4.1.9.10.106.1.8.1.5 | CpwVcIndexType | read-only | current |
| cpwVcUpDownNotifEnable OBJECT-TYPE If this object is set to true(1), then it enables the emission of cpwVcUp and cpwVcDown notifications; otherwise these notifications are not emitted. | 1.3.6.1.4.1.9.10.106.1.9 | TruthValue | read-write | current |
| cpwVcNotifRate OBJECT-TYPE This object defines the maximum number of PW VC notifications that can be emitted from the device per second. | 1.3.6.1.4.1.9.10.106.1.10 | Unsigned32 | read-write | current |
| cpwVcNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.106.2 | |||
| cpwVcConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.106.3 | |||
| cpwVcGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.106.3.1 | |||
| cpwVcCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.106.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| cpwVcDown NOTIFICATION-TYPE This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the down(2) state from some other state. The included values of cpwVcOperStatus MUST all be set equal to this down(2) state. The two instances of cpwVcOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the down(2) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two cpwVcOperStatus objects MUST be identical. | 1.3.6.1.4.1.9.10.106.2.1 | current |
| cpwVcUp NOTIFICATION-TYPE This notification is generated when the cpwVcOperStatus object for one or more contiguous entries in cpwVcTable are about to enter the up(1) state from some other state. The included values of cpwVcOperStatus MUST both be set equal to this new state (i.e: up(1)). The two instances of cpwVcOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two cpwVcOperStatus objects MUST be the identical. | 1.3.6.1.4.1.9.10.106.2.2 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| cpwVcGroup OBJECT-GROUP Collection of objects needed for PW VC configuration. | 1.3.6.1.4.1.9.10.106.3.1.1 | current |
| cpwVcPeformanceGroup OBJECT-GROUP Collection of objects needed for PW VC performance. | 1.3.6.1.4.1.9.10.106.3.1.2 | current |
| cpwVcMappingTablesGroup OBJECT-GROUP Collection of objects contained in the reverse mapping tables. | 1.3.6.1.4.1.9.10.106.3.1.3 | current |
| cpwVcNotificationsGroup NOTIFICATION-GROUP Set of notifications implemented in this module. None is mandatory. | 1.3.6.1.4.1.9.10.106.3.1.4 | current |
| cpwModuleCompliance MODULE-COMPLIANCE The compliance statement for agent that support PW operation. | 1.3.6.1.4.1.9.10.106.3.2.1 | current |