CISCO-IETF-PW-ATM-MIB
- Registered at
- 1.3.6.1.4.1.9.10.9000
- Last updated
- 2005-04-19 12:00
- Organization
- Cisco Systems, Inc
- Revisions
- 2005-04-19 12:00, 2003-02-16 12:00
- Namespace
- cisco
- Source file
CISCO-IETF-PW-ATM-MIB- Digest
sha256:4c1bb3b74da065d1b106a4c276962ffd3dfe4d7f8d26a4e204d9132120c0c895
Description
This MIB contains managed object definitions for Pseudo Wire emulation of ATM over Packet Switched Networks(PSN). This MIB reports to the PW-MIB. The PW-MIB contains structures and MIB associations generic to Pseudo-Wire Virtual Circuit (VC) emulation. VC-specific MIBs (such as this) contain config and stats for specific VC types.
Contact
Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-atm@cisco.com
Imports
| From | Symbols |
|---|---|
| ATM-TC-MIB | AtmVcIdentifier, AtmVpIdentifier |
| CISCO-IETF-PW-MIB | cpwVcIndex |
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATM-TC-MIB CISCO-IETF-PW-ATM-MIB CISCO-IETF-PW-MIB CISCO-IETF-PW-TC-MIB CISCO-SMI IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cpwVcAtmNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.9000.0 | |||
| cpwVcAtmObjects OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.9000.1 | |||
| cpwVcAtmTable OBJECT-TYPE This table specifies the information for an ATM interface, VC, VP to be carried over PSN. | 1.3.6.1.4.1.9.10.9000.1.1 | not-accessible | current | |
| cpwVcAtmEntry OBJECT-TYPE A row in this table represents an ATM interface, VC, VP that needs to be adapted and carried over PSN. This table is indexed by CpwVcIndex in CISCO-IETF-PW-MIB. | 1.3.6.1.4.1.9.10.9000.1.1.1 | not-accessible | current | |
| cpwAtmIf OBJECT-TYPE The ATM Interface that receives cells from the ATM network. | 1.3.6.1.4.1.9.10.9000.1.1.1.1 | InterfaceIndex | read-create | current |
| cpwAtmVpi OBJECT-TYPE VPI value of this ATM VC. | 1.3.6.1.4.1.9.10.9000.1.1.1.2 | AtmVpIdentifier | read-create | current |
| cpwAtmVci OBJECT-TYPE VCI value of this ATM VC. | 1.3.6.1.4.1.9.10.9000.1.1.1.3 | AtmVcIdentifier | read-create | current |
| cpwAtmClpQosMapping OBJECT-TYPE This Object indicates whether the CLP bits are considered when determining the value placed in the Quality of Service fields (e.g. EXP fields of the MPLS Label Stack) of the encapsulating protocol. | 1.3.6.1.4.1.9.10.9000.1.1.1.4 | TruthValue | read-create | current |
| cpwAtmRowStatus OBJECT-TYPE This Object is used to create, modify or delete a row in this table. | 1.3.6.1.4.1.9.10.9000.1.1.1.5 | RowStatus | read-create | current |
| cpwAtmOamCellSupported OBJECT-TYPE This Object indicates whether OAM Cells are transported on this VC. | 1.3.6.1.4.1.9.10.9000.1.1.1.6 | TruthValue | read-create | current |
| cpwAtmQosScalingFactor OBJECT-TYPE This Object represents the scaling factor (% value) to be applied to ATM QoS rates when calculating QoS rates for the PSN domain . For example, in the cell transport mode the bandwidth needed in the PSN domain will be higher (since PSN Transport header, PW header, and optional control word have to transmitted with every cell), whereas in the AAL5 mode the bandwidth needed in PSN domain will be less since cell headers will be removed after reassembly. | 1.3.6.1.4.1.9.10.9000.1.1.1.7 | Integer32 | read-create | current |
| cpwAtmCellPacking OBJECT-TYPE This object is used to identify if the VC is configured to do Cell Packing. | 1.3.6.1.4.1.9.10.9000.1.1.1.8 | TruthValue | read-create | current |
| cpwAtmMncp OBJECT-TYPE This object indicates the maximum number of cells that get packed in one packet. | 1.3.6.1.4.1.9.10.9000.1.1.1.9 | Integer32 | read-create | current |
| cpwAtmPeerMncp OBJECT-TYPE This Object represents the maximum number of cell that can be packed in one packet for peer interface. | 1.3.6.1.4.1.9.10.9000.1.1.1.10 | Integer32 | read-only | current |
| cpwAtmEncap OBJECT-TYPE This object indicates if the packet going on the pseudowire is mpls or l2tpv3 encapsulated. | 1.3.6.1.4.1.9.10.9000.1.1.1.11 | INTEGER {mpls(1), l2tpv3(2), unknown(3)} | read-create | current |
| cpwAtmMcptTimeout OBJECT-TYPE This Object represents which MCPT timeout value. | 1.3.6.1.4.1.9.10.9000.1.1.1.12 | Integer32 | read-create | current |
| cpwVcAtmPerfTable OBJECT-TYPE This table specifies performance-related attributes for an ATM vc, vp and the interface. | 1.3.6.1.4.1.9.10.9000.1.2 | not-accessible | current | |
| cpwVcAtmPerfEntry OBJECT-TYPE A row in this table represents an ATM interface, VC, VP that needs to be adapted and carried over PSN. This table is indexed by CpwVcIndex in CISCO-IETF-PW-MIB. | 1.3.6.1.4.1.9.10.9000.1.2.1 | not-accessible | current | |
| cpwAtmCellsReceived OBJECT-TYPE This object can be used to obtain the information on the number of cells that were received and sent to the PSN. | 1.3.6.1.4.1.9.10.9000.1.2.1.1 | Counter32 | read-only | current |
| cpwAtmCellsSent OBJECT-TYPE This object can be used to obtain the information on the number of cells that were received from the PSN and sent over the ATM network. | 1.3.6.1.4.1.9.10.9000.1.2.1.2 | Counter32 | read-only | current |
| cpwAtmCellsRejected OBJECT-TYPE This Object indicates the number of cells that were rejected by this VC because of policing. | 1.3.6.1.4.1.9.10.9000.1.2.1.3 | Counter32 | read-only | current |
| cpwAtmCellsTagged OBJECT-TYPE This Object indicates the number of cells that were Tagged. | 1.3.6.1.4.1.9.10.9000.1.2.1.4 | Counter32 | read-only | current |
| cpwAtmHCCellsReceived OBJECT-TYPE High Capacity counter for the number of cells that were received by this VC. | 1.3.6.1.4.1.9.10.9000.1.2.1.5 | Counter64 | read-only | current |
| cpwAtmHCCellsRejected OBJECT-TYPE High Capacity counter for the number of cells that were rejected by this VC because of policing. | 1.3.6.1.4.1.9.10.9000.1.2.1.6 | Counter64 | read-only | current |
| cpwAtmHCCellsTagged OBJECT-TYPE High Capacity counter for the number of cells that were tagged | 1.3.6.1.4.1.9.10.9000.1.2.1.7 | Counter64 | read-only | current |
| cpwAtmAvgCellsPacked OBJECT-TYPE It indicates the Average number of cells that were received in one packet. | 1.3.6.1.4.1.9.10.9000.1.2.1.8 | Counter32 | read-only | current |
| cpwAtmPktsReceived OBJECT-TYPE This object can be used to obtain the information on the number of packets that were received and sent to the PSN. | 1.3.6.1.4.1.9.10.9000.1.2.1.9 | Counter32 | read-only | current |
| cpwAtmPktsSent OBJECT-TYPE This object indicates the number of packets that were sent to the atm network. | 1.3.6.1.4.1.9.10.9000.1.2.1.10 | Counter32 | read-only | current |
| cpwAtmPktsRejected OBJECT-TYPE This object indicates the number of packets that were rejected because of Policing. | 1.3.6.1.4.1.9.10.9000.1.2.1.11 | Counter32 | read-only | current |
| cpwVcAtmConformance OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.9000.2 | |||
| cpwVcAtmGroups OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.9000.2.1 | |||
| cpwVcAtmCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.9.10.9000.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| cpwVcAtmGroup OBJECT-GROUP Collection of objects for basic ATM PW outbound config. | 1.3.6.1.4.1.9.10.9000.2.1.1 | current |
| cpwAtmPerfGroup OBJECT-GROUP Collection of objects counting various outbound ATM PW statistics. | 1.3.6.1.4.1.9.10.9000.2.1.2 | current |
| cpwVcAtmModuleCompliance MODULE-COMPLIANCE The compliance statement for agent that support PW ATM. | 1.3.6.1.4.1.9.10.9000.2.2.1 | current |