MIBs Depot

CIENA-CES-TIME-SYNC-MIB

Registered at
1.3.6.1.4.1.1271.2.1.28
1.3.6.1.4.1.1271.2.2.28
Last updated
2016-01-21 00:00
Organization
Ciena, Inc
Revisions
2016-01-21 00:00, 2015-09-28 00:00, 2015-04-20 00:00, 2015-04-10 00:00, 2015-03-19 00:00, 2015-03-11 00:00, 2015-02-04 00:00, 2015-01-23 00:00, 2015-01-07 00:00, 2014-04-25 00:00, 2014-03-25 00:00, 2013-12-03 00:00, 2013-05-17 00:00, 2013-05-07 00:00, 2013-04-20 00:00, 2013-04-16 00:00, 2013-04-08 00:00, 2013-03-08 00:00, 2012-06-20 00:00
Namespace
ciena
Source file
CIENA-CES-TIME-SYNC-MIB
Digest
sha256:1b810e3a2ac68be75abfb63aeac82570fe4dc358a8f90a4e4b4f91921f3f830a

Description

This MIB module defines objects and associated notifications for the System Timing feature.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
CIENA-CES-MODULE-MIBcienaCesModuleSlotName
CIENA-GLOBAL-MIBcienaGlobalMacAddress, cienaGlobalSeverity
CIENA-SMIcienaCesConfig, cienaCesNotifications
CIENA-TCCienaGlobalState
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CIENA-CES-MODULE-MIB
CIENA-CES-TIME-SYNC-MIB
CIENA-GLOBAL-MIB
CIENA-SMI
CIENA-TC
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
SsmStratumLevel
TEXTUAL-CONVENTION
International and North American SSM Values
current
SyncBITSSignalEncoding
TEXTUAL-CONVENTION
Encoding method used on T1/E1 BITS signal.
current
SyncBITSSignalFormat
TEXTUAL-CONVENTION
Station Clock BITS signal format. Esf and sf are applied to t1 signal only where as ccs and cas are applied to e1 signal.
current
SyncBITSSignalMode
TEXTUAL-CONVENTION
Station Clock BITS signal mode.
current
SyncGPSFreqClock
TEXTUAL-CONVENTION
The frequency of the clock for a GPS input/output reference, set when the reference is configured with a clock mode of frequency.
current
SyncInterfaceProtocol
TEXTUAL-CONVENTION
Interface protocol of an input/output reference.
current
SyncPTPEncapType
TEXTUAL-CONVENTION
The PTP encapsulation type.
current
SyncPTPRatePps
TEXTUAL-CONVENTION
The PTP rate in pps.
current
SyncRefOperationalStatus
TEXTUAL-CONVENTION
Operational status of an input/output reference.
current
SyncTimingType
TEXTUAL-CONVENTION
The timing domain; frequency, phase or time of day.
current

Objects

NameOIDSyntaxAccessStatus
cienaCesTimeSyncMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1
cienaCesTimeSyncObjects
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1
cienaCesSyncAdminState
OBJECT-TYPE
Globally enable/disable Sync
1.3.6.1.4.1.1271.2.1.28.1.1.1CienaGlobalStateread-onlycurrent
cienaCesSyncOptionType
OBJECT-TYPE
Indication of which set of SSM values being used. Option 1 is for International standard and Option 2 is for North American.
1.3.6.1.4.1.1271.2.1.28.1.1.2INTEGER {unknown(1), option1(2), option2(3)}read-onlycurrent
cienaCesSyncRevertiveMode
OBJECT-TYPE
Revertive mode.
1.3.6.1.4.1.1271.2.1.28.1.1.3INTEGER {unknown(1), revertive(2), nonrevertive(3)}read-onlycurrent
cienaCesSyncWaitToRestoreTimer
OBJECT-TYPE
User configured timer for a timing reference source to wait before transitioning from bad to good clock signal.
1.3.6.1.4.1.1271.2.1.28.1.1.4Unsigned32read-onlycurrent
cienaCesSyncInputProtectionGroupTable
OBJECT-TYPE
A table of protection groups for input timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.5not-accessiblecurrent
cienaCesSyncInputProtectionGroupEntry
OBJECT-TYPE
An entry in this table represents information on a protection group for input timing reference
1.3.6.1.4.1.1271.2.1.28.1.1.5.1not-accessiblecurrent
cienaCesInputPGEntityId
OBJECT-TYPE
The unique identifier of this input protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.1Integer32 (1)not-accessiblecurrent
cienaCesInputPGEntityName
OBJECT-TYPE
The unique name of this input protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesInputPGPreferredReference
OBJECT-TYPE
Preferred timing reference source, configured by users.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.3DisplayString (SIZE(1..31))read-onlydeprecated
cienaCesInputPGSelectedReference
OBJECT-TYPE
System selected timing reference source.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.4DisplayString (SIZE(1..31))read-onlycurrent
cienaCesInputPGForcedReference
OBJECT-TYPE
System was forced to used this timing reference source.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.5DisplayString (SIZE(1..31))read-onlycurrent
cienaCesInputPGThresholdQualityLevel
OBJECT-TYPE
Specified Quality Level threshold for a reference source being selected.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.6SsmStratumLevelread-onlycurrent
cienaCesInputPGState
OBJECT-TYPE
Configured state of this protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.7CienaGlobalStateread-onlydeprecated
cienaCesInputPGStateDuration
OBJECT-TYPE
Duration since the system entered current state.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.8DisplayString (SIZE(1..31))read-onlycurrent
cienaCesInputPGReferenceSwitchCount
OBJECT-TYPE
The number of timing reference switching since the system stared up.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.9Unsigned32read-onlycurrent
cienaCesInputPGOperationalStatus
OBJECT-TYPE
Operational status of this protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.10INTEGER {unknown(1), freerun(2), holdover(3), locked(4), acquiringlock(5), holdoverexpired(6)}read-onlycurrent
cienaCesInputPGTimingType
OBJECT-TYPE
The timing domain (freq/phase/tod) that this protection group belongs to.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.11SyncTimingTyperead-onlycurrent
cienaCesInputPGOperationalQualityLevel
OBJECT-TYPE
Operational Quality Level of the protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.12SsmStratumLevelread-onlycurrent
cienaCesSyncInputProtectionUnitTable
OBJECT-TYPE
A table of protection units for input timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.6not-accessiblecurrent
cienaCesSyncInputProtectionUnitEntry
OBJECT-TYPE
An entry in this table represents information on a protection unit for input timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1not-accessiblecurrent
cienaCesInputPUEntityId
OBJECT-TYPE
The unique identifier of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.1Integer32 (1..48)not-accessiblecurrent
cienaCesInputPUEntityName
OBJECT-TYPE
The unique name of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesInputPUPGEntityName
OBJECT-TYPE
The identifier of the input protection group(s) which this input protection unit belongs to.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.3DisplayStringread-onlycurrent
cienaCesInputPUTimingInterfaceName
OBJECT-TYPE
The interface name of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.4DisplayString (SIZE(1..31))read-onlycurrent
cienaCesInputPUTimingInterfaceProtocol
OBJECT-TYPE
The interface protocol of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.5SyncInterfaceProtocolread-onlycurrent
cienaCesInputPUUserPriority
OBJECT-TYPE
The user configured priority of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.6Unsigned32read-onlycurrent
cienaCesInputPUOperationalQL
OBJECT-TYPE
Operational clock quality level of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.7SsmStratumLevelread-onlycurrent
cienaCesInputPUForcedQL
OBJECT-TYPE
User configured clock quality level that this input protection unit is forced to operate at.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.8SsmStratumLevelread-onlycurrent
cienaCesInputPUReceivedQL
OBJECT-TYPE
Actual received clock quality level of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.9SsmStratumLevelread-onlycurrent
cienaCesInputPUSsmEnabled
OBJECT-TYPE
Enable/disable reading of actual received clock quality level for this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.10INTEGER {unknown(1), disabled(2), enabled(3)}read-onlycurrent
cienaCesInputPUOperationalStatus
OBJECT-TYPE
Operational status of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.11SyncRefOperationalStatusread-onlycurrent
cienaCesInputPUBITSSignalMode
OBJECT-TYPE
BITS Signal Mode, set if BITS signal is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.12SyncBITSSignalModeread-onlycurrent
cienaCesInputPUBITSSignalFormat
OBJECT-TYPE
BITS Signal Format, set if BITS signal is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.13SyncBITSSignalFormatread-onlycurrent
cienaCesInputPUBITSSignalEncoding
OBJECT-TYPE
BITS Signal encoding, set if BITS signal is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.14SyncBITSSignalEncodingread-onlycurrent
cienaCesInputPUUserOverridePriority
OBJECT-TYPE
The user configured override-priority of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.15Unsigned32read-onlycurrent
cienaCesInputPUPTPEncapType
OBJECT-TYPE
PTP Encapsulation Type, set if a PTP input is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.16SyncPTPEncapTyperead-onlycurrent
cienaCesInputPUGPSClockMode
OBJECT-TYPE
GPS clock mode, set if a GPS input is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.17SyncTimingTyperead-onlycurrent
cienaCesInputPUGPSFreqClock
OBJECT-TYPE
GPS frequency clock, set if a GPS input is used as a protection unit and the cienaCesInputPUGPSClockMode is set to frequency.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.18SyncGPSFreqClockread-onlycurrent
cienaCesInputPUBITSSignalSsmLocation
OBJECT-TYPE
BITS Signal Ssm Location, set if BITS signal is used as an input reference.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.19INTEGER {unknown(1), sa4(2), sa5(3), sa6(4), sa7(5), sa8(6)}read-onlycurrent
cienaCesSyncOutputTable
OBJECT-TYPE
A table of output timing references.
1.3.6.1.4.1.1271.2.1.28.1.1.7not-accessiblecurrent
cienaCesSyncOutputEntry
OBJECT-TYPE
An entry in this table represents information for an output timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1not-accessiblecurrent
cienaCesOutputEntityId
OBJECT-TYPE
The unique identifier of this output reference entity.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.1Integer32 (1..48)not-accessiblecurrent
cienaCesOutputEntityName
OBJECT-TYPE
The unique name of this output reference entity.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.2DisplayString (SIZE(1..31))read-onlycurrent
cienaCesOutputTimingInterfaceName
OBJECT-TYPE
The interface name of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.3DisplayString (SIZE(1..31))read-onlycurrent
cienaCesOutputTimingInterfaceProtocol
OBJECT-TYPE
The interface protocol of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.4SyncInterfaceProtocolread-onlycurrent
cienaCesOutputOperationalQL
OBJECT-TYPE
Operational clock quality level of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.5SsmStratumLevelread-onlycurrent
cienaCesOutputOperationalStatus
OBJECT-TYPE
Operational status of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.6SyncRefOperationalStatusread-onlycurrent
cienaCesOutputBITSSignalMode
OBJECT-TYPE
BITS Signal Mode, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.7SyncBITSSignalModeread-onlycurrent
cienaCesOutputBITSSignalFormat
OBJECT-TYPE
BITS Signal Format, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.8SyncBITSSignalFormatread-onlycurrent
cienaCesOutputBITSSignalEncoding
OBJECT-TYPE
BITS Signal encoding, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.9SyncBITSSignalEncodingread-onlycurrent
cienaCesOutputBITSSignalLineBuildout
OBJECT-TYPE
BITS Signal Line Buildout, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.10INTEGER {unknown(1), lbo133(2), lbo266(3), lbo399(4), lbo533(5), lbo655(6)}read-onlycurrent
cienaCesOutputBITSSignalSsmLocation
OBJECT-TYPE
BITS Signal Ssm Location, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.11INTEGER {unknown(1), sa4(2), sa5(3), sa6(4), sa7(5), sa8(6)}read-onlycurrent
cienaCesOutputGPSClockMode
OBJECT-TYPE
GPS clock mode, set if a GPS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.12SyncTimingTyperead-onlycurrent
cienaCesOutputGPSFreqClock
OBJECT-TYPE
GPS frequency clock, set if a GPS signal is used as an output reference and the cienaCesOutputGPSClockMode is set to frequency.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.13SyncGPSFreqClockread-onlycurrent
cienaCesOutputPTPEncapType
OBJECT-TYPE
PTP Encapsulation Type, set if a PTP output is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.14SyncPTPEncapTyperead-onlycurrent
cienaCesSyncPTPConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1.8
cienaCesSyncPTPGlobalConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1.8.1
cienaCesSyncPTPAddrMode
OBJECT-TYPE
PTP Address Mode.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.1INTEGER {unknown(1), unicast(2), multicast(3)}read-onlycurrent
cienaCesSyncPTPTagPriority
OBJECT-TYPE
PTP tag priority
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.2Unsigned32read-onlycurrent
cienaCesSyncPTPProtocolVersion
OBJECT-TYPE
PTP Protocol Version.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.3INTEGER {unknown(1), v2(2)}read-onlycurrent
cienaCesSyncPTPProfileVersion
OBJECT-TYPE
PTP Profile Version.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.4INTEGER {unknown(1), version1dot0(2)}read-onlycurrent
cienaCesSyncPTPProfileIdentifier
OBJECT-TYPE
PTP profile identifier address.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.5MacAddressread-onlycurrent
cienaCesSyncPTPDomainNumber
OBJECT-TYPE
PTP domain number.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.6Unsigned32read-onlycurrent
cienaCesSyncPTPClockType
OBJECT-TYPE
PTP Clock Type.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.7INTEGER {unknown(1), ocslave(2), bc(3)}read-onlycurrent
cienaCesSyncPTPClockID
OBJECT-TYPE
PTP clock identifier.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.8DisplayString (SIZE(1..31))read-onlycurrent
cienaCesSyncPTPDscp
OBJECT-TYPE
PTP DSCP.
1.3.6.1.4.1.1271.2.1.28.1.1.8.1.9Unsigned32read-onlycurrent
cienaCesSyncPTPInputConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1.8.2
cienaCesSyncPTPInputUnicastReqDuration
OBJECT-TYPE
PTP input unicast request duration in seconds.
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.1Unsigned32read-onlycurrent
cienaCesSyncPTPInputAnnounceRxLossNum
OBJECT-TYPE
PTP input announce Rx loss num (announce intervals).
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.2Unsigned32read-onlycurrent
cienaCesSyncPTPInputAnnounceTxRateReq
OBJECT-TYPE
PTP input announce Tx rate request (pps).
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.3SyncPTPRatePpsread-onlycurrent
cienaCesSyncPTPInputSyncTxRateReq
OBJECT-TYPE
PTP input sync Tx rate request (pps).
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.4SyncPTPRatePpsread-onlycurrent
cienaCesSyncPTPInputDelayReqTxRate
OBJECT-TYPE
PTP input delay request Tx rate (pps).
1.3.6.1.4.1.1271.2.1.28.1.1.8.2.5SyncPTPRatePpsread-onlycurrent
cienaCesSyncPTPOutputConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1.8.3
cienaCesSyncPTPOutputMaxSlaveSessions
OBJECT-TYPE
Maximum number of allowed PTP slave sessions for PTP outputs.
1.3.6.1.4.1.1271.2.1.28.1.1.8.3.1Unsigned32read-onlycurrent
cienaCesSyncPTPOutputTimestampMode
OBJECT-TYPE
PTP timestamp mode.
1.3.6.1.4.1.1271.2.1.28.1.1.8.3.2INTEGER {unknown(1), onestep(2), twostep(3)}read-onlycurrent
cienaCesSyncGPSConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1.9
cienaCesSyncGPSOutputConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.1.28.1.1.9.1
cienaCesSyncGPSOutput1ppsPulseWidth
OBJECT-TYPE
The 1pps pulse width, in microseconds, for GPS output references (applicable to phase).
1.3.6.1.4.1.1271.2.1.28.1.1.9.1.1Unsigned32read-onlycurrent
cienaCesSyncHoldoverInterval
OBJECT-TYPE
User configured interval after which holdover quality level changes.
1.3.6.1.4.1.1271.2.1.28.1.1.10INTEGER {unknown(1), indefinite(2), twentyfourhours(3)}read-onlycurrent
cienaCesSyncModuleSlotClockStatus
OBJECT-TYPE
Lock status of module slot.
1.3.6.1.4.1.1271.2.1.28.1.1.11INTEGER {unknown(1), lossoflock(2), lockedtoprimaryctx(3), lockedtosecondaryctx(4)}accessible-for-notifycurrent
cienaCesTimeSyncMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.28
cienaCesTimeSyncMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.1271.2.2.28.0

Notifications

NameOIDStatus
cienaCesSyncInputPUStateChangeNotification
NOTIFICATION-TYPE
Sent when a configured timing reference transitions states.
1.3.6.1.4.1.1271.2.2.28.0.1current
cienaCesSyncInputProtectionGroupStateChangeNotification
NOTIFICATION-TYPE
Sent when a configured protection-group transitions states.
1.3.6.1.4.1.1271.2.2.28.0.2current
cienaCesSyncModuleSlotClockStateChangeNotification
NOTIFICATION-TYPE
Sent when a slot other than the primary CTX experiences a timing state change. Only applicable in SAOS 8.x.
1.3.6.1.4.1.1271.2.2.28.0.3current