CIENA-CES-MODULE-MIB
- Registered at
- 1.3.6.1.4.1.1271.2.1.21.3.6.1.4.1.1271.2.2.3
- Last updated
- 2014-01-23 00:00
- Organization
- Ciena Corp.
- Revisions
- 2014-01-23 00:00, 2013-12-05 00:00, 2013-04-16 00:00, 2013-03-28 00:00, 2013-03-07 00:00, 2012-08-23 00:00, 2012-06-28 00:00, 2012-06-14 00:00, 2011-06-06 00:00, 2010-12-13 00:00, 2010-05-10 00:00
- Namespace
- ciena
- Source file
CIENA-CES-MODULE-MIB- Digest
sha256:fda5316cb50f6f32cd50c5a90772758bdb0116dd26ff958705ce913ed4f2d5b0
Description
This module defines the module configuration objects and also the objects required for module related notifications.
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| CIENA-GLOBAL-MIB | cienaGlobalMacAddress, cienaGlobalSeverity |
| CIENA-SMI | cienaCesConfig, cienaCesNotifications |
| CIENA-TC | CienaGlobalState |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, TEXTUAL-CONVENTION |
Imported by
3 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CIENA-CES-MODULE-MIB CIENA-GLOBAL-MIB CIENA-SMI CIENA-TC SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| HealthOriginType TEXTUAL-CONVENTION Origin of the resource. | current | |||
| SwModuleState TEXTUAL-CONVENTION Xgrade state. | current | |||
| SwPkgStatus TEXTUAL-CONVENTION Last Xgrade command operational state. | current | |||
| TceHealthCategory TEXTUAL-CONVENTION CES system health categories. | current | |||
| TceHealthStatus TEXTUAL-CONVENTION CES system health status code. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| cienaCesModuleMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.1 | |||
| cienaCesModuleGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.1.1 | |||
| cienaCesModuleGlobalPostState OBJECT-TYPE This object indicates the global POST state for the system. | 1.3.6.1.4.1.1271.2.1.2.1.1.1 | CienaGlobalState | read-only | current |
| cienaCesModule OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.1.2 | |||
| cienaCesModuleTable OBJECT-TYPE The (conceptual) table listing the modules configured and detected. | 1.3.6.1.4.1.1271.2.1.2.1.2.1 | not-accessible | current | |
| cienaCesModuleEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModuleTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1 | not-accessible | current | |
| cienaCesModuleChassisIndx OBJECT-TYPE This object indicates the chassis index for the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.1 | Unsigned32 (1) | not-accessible | current |
| cienaCesModuleShelfIndx OBJECT-TYPE This object indicates the shelf index for the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.2 | Unsigned32 (0..992) | not-accessible | current |
| cienaCesModuleSlotIndx OBJECT-TYPE This object indicates the slot index for the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.3 | Unsigned32 (1..38) | not-accessible | current |
| cienaCesModuleModel OBJECT-TYPE This object indicates the module model. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.4 | DisplayString | read-only | current |
| cienaCesModuleType OBJECT-TYPE This object indicates whether this is a single module, control timing module, I/O module or fabric module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.5 | INTEGER {invalid(0), unknown(1), ctm(2), lm(3), sm(4)} | read-only | current |
| cienaCesModuleDescription OBJECT-TYPE This object indicates the description of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.6 | DisplayString | read-only | current |
| cienaCesModuleAdminState OBJECT-TYPE This object indicates the administrative state of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.7 | INTEGER {enabled(1), disabled(2), shutdown(3)} | read-only | current |
| cienaCesModuleOperState OBJECT-TYPE This object indicates the operational state of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.8 | INTEGER {uninstalled(1), unequipped(2), init(3), disabled(4), enabled(5), faulted(6), hotswap(7), poweroff(8), hitlessInit(9), fastReload(10), krnInit(11), unsupported(12), installing(13), failed(14), krnDisable(15), appFault(16), booting(17), powerdown(18)} | read-only | current |
| cienaCesModuleProtectionRole OBJECT-TYPE This object indicates the redundant administrative state of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.9 | INTEGER {none(1), primary(2), secondary(3)} | read-only | current |
| cienaCesModuleStandbyStatus OBJECT-TYPE This object indicates the standby status of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.10 | INTEGER {none(0), cold(1), warm(2), hot(3), protected(4)} | read-only | current |
| cienaCesModuleLastRebootReason OBJECT-TYPE This object indicates the last reboot reason of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.11 | INTEGER {unknown(1), snmp(2), pwrFail(3), appLoad(4), errorHandler(5), watchdog(6), upgrade(7), cli(8), resetButton(9), failOver(10), faultManager(11), communicationFailure(12), configurationRevert(13), unprotectedFailure(14), bootFailure(15), softwareRevert(16), processorWarmRestart(17), coldRestart(18), primaryRestart(19)} | read-only | current |
| cienaCesModuleAdminPostState OBJECT-TYPE This object sets the POST administrative state for the given module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.12 | CienaGlobalState | read-only | current |
| cienaCesModuleOperPostState OBJECT-TYPE This object indicates the POST operational state for the given module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.13 | CienaGlobalState | read-only | current |
| cienaCesModuleTrapState OBJECT-TYPE This object indicates whether the device generates notifications for this module. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.16 | CienaGlobalState | read-write | current |
| cienaCesModuleChassisNotifIndx OBJECT-TYPE This object indicates the chassis index for the module used in trap definition. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.17 | Unsigned32 (1) | accessible-for-notify | current |
| cienaCesModuleShelfNotifIndx OBJECT-TYPE This object indicates the shelf index for the module used in trap definition. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.18 | Unsigned32 (0..992) | accessible-for-notify | current |
| cienaCesModuleSlotNotifIndx OBJECT-TYPE This object indicates the slot index for the module used in trap definition. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.19 | Unsigned32 (1..38) | accessible-for-notify | current |
| cienaCesModuleSlotName OBJECT-TYPE This object indicates the slot name that the module is installed in. | 1.3.6.1.4.1.1271.2.1.2.1.2.1.1.20 | DisplayString | read-only | current |
| cienaCesModuleDescriptionTable OBJECT-TYPE The (conceptual) table listing the description of physical attributes of the modules. | 1.3.6.1.4.1.1271.2.1.2.1.2.2 | not-accessible | current | |
| cienaCesModuleDescriptionEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModuleDescriptionTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1 | not-accessible | current | |
| cienaCesModuleDescriptionBoardName OBJECT-TYPE This object indicates the module name. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.1 | DisplayString | read-only | current |
| cienaCesModuleDescriptionBoardPartNum OBJECT-TYPE This object indicates the board part number. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.2 | DisplayString | read-only | current |
| cienaCesModuleDescriptionBoardSerialNum OBJECT-TYPE This object indicates the board serial number. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.3 | DisplayString | read-only | current |
| cienaCesModuleDescriptionBoardDesc OBJECT-TYPE This object indicates the board description. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.4 | DisplayString | read-only | current |
| cienaCesModuleDescriptionHwVersion OBJECT-TYPE This object indicates the module hardware version. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.5 | DisplayString | read-only | current |
| cienaCesModuleDescriptionMfgDate OBJECT-TYPE This object indicates the module manufacturing date. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.6 | DisplayString | read-only | current |
| cienaCesModuleDescriptionBaseMac OBJECT-TYPE This object indicates the module base MAC address. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.7 | MacAddress | read-only | current |
| cienaCesModuleDescriptionUpTime OBJECT-TYPE This object indicates the module up time (in hundredths of a second) since the module was last re-initialized. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.8 | TimeTicks | read-only | current |
| cienaCesModuleDescriptionTotalNumPorts OBJECT-TYPE This object indicates the number of ports on this module. | 1.3.6.1.4.1.1271.2.1.2.1.2.2.1.9 | Integer32 | read-only | current |
| cienaCesModuleTempSensorTable OBJECT-TYPE The (conceptual) table listing the temperature sensors of the modules. | 1.3.6.1.4.1.1271.2.1.2.1.2.3 | not-accessible | current | |
| cienaCesModuleTempSensorEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModuleTempSensorTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1 | not-accessible | current | |
| cienaCesModuleSensorIndx OBJECT-TYPE This object indicates the unique index in the table along with cienaCesModuleIndx. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.1 | Integer32 (1..65535) | not-accessible | current |
| cienaCesModuleSensorDescription OBJECT-TYPE This object indicates the sensor description. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.2 | DisplayString | read-only | current |
| cienaCesModuleSensorCurrentTemp OBJECT-TYPE This object indicates the current temperature of the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.3 | Integer32 | read-only | current |
| cienaCesModuleSensorHighTemp OBJECT-TYPE This object indicates the highest temperature this module has reached since the last reboot. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.4 | Integer32 | read-only | current |
| cienaCesModuleSensorLowTemp OBJECT-TYPE This object indicates the lowest temperature this module has reached since the last reboot | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.5 | Integer32 | read-only | current |
| cienaCesModuleSensorHighTempThreshold OBJECT-TYPE This object indicates the high threshold for this module temperature. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.6 | Integer32 (0..60) | read-only | current |
| cienaCesModuleSensorLowTempThreshold OBJECT-TYPE This object indicates the low threshold for this module temperature. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.7 | Integer32 (0..60) | read-only | current |
| cienaCesModuleSensorNotifIndx OBJECT-TYPE This object indicates the unique index in the table used for trap definition. | 1.3.6.1.4.1.1271.2.1.2.1.2.3.1.8 | Integer32 (1..65535) | accessible-for-notify | current |
| cienaCesSwModule OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.1.2.4 | |||
| cienaCesGlobalSwState OBJECT-TYPE The global software state of the system. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.1 | INTEGER {idle(1), downloading(2), installing(3), activating(4), validating(5), reverting(6), running(7)} | read-only | current |
| cienaCesModuleSwTable OBJECT-TYPE The (conceptual) table listing the software package attributes on the modules. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2 | not-accessible | current | |
| cienaCesModuleSwEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModuleSwTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1 | not-accessible | current | |
| cienaCesModuleSwState OBJECT-TYPE The software state on the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.1 | SwModuleState | read-only | current |
| cienaCesModuleSwRunningRelease OBJECT-TYPE Software package version that is currently running on the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.2 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwRunningReleasePartition OBJECT-TYPE Release partition where the current running release is installed. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.3 | Unsigned32 | read-only | current |
| cienaCesModuleSwReleasePartition0Pkg OBJECT-TYPE Release partition 0 software package version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.4 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwReleasePartition0PkgStatus OBJECT-TYPE Release partition 0 software package status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.5 | SwPkgStatus | read-only | current |
| cienaCesModuleSwReleasePartition1Pkg OBJECT-TYPE Release partition 1 software package version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.6 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwReleasePartition1PkgStatus OBJECT-TYPE Release partition 1 software package status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.7 | SwPkgStatus | read-only | current |
| cienaCesModuleSwReleasePartition2Pkg OBJECT-TYPE Release partition 2 software package version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.8 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwReleasePartition2PkgStatus OBJECT-TYPE Release partition 2 software package status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.9 | SwPkgStatus | read-only | current |
| cienaCesModuleSwBank0KernelVersion OBJECT-TYPE Bank0 kernel version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.10 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwBank0KernelStatus OBJECT-TYPE Bank0 kernel software status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.11 | SwPkgStatus | read-only | current |
| cienaCesModuleSwBank1KernelVersion OBJECT-TYPE Bank1 kernel version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.12 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwBank1KernelStatus OBJECT-TYPE Bank1 kernel status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.13 | SwPkgStatus | read-only | current |
| cienaCesModuleSwBank0UbootVersion OBJECT-TYPE Bank0 U-boot version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.14 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwBank0UbootStatus OBJECT-TYPE Bank0 U-boot status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.15 | SwPkgStatus | read-only | current |
| cienaCesModuleSwBank1UbootVersion OBJECT-TYPE Bank1 U-boot version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.16 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwBank1UbootStatus OBJECT-TYPE Bank0 U-boot status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.17 | SwPkgStatus | read-only | current |
| cienaCesModuleSwUbootGoldVersion OBJECT-TYPE U-boot Gold version. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.18 | DisplayString (SIZE(0..256)) | read-only | current |
| cienaCesModuleSwUbootGoldStatus OBJECT-TYPE U-boot Gold status. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.19 | SwPkgStatus | read-only | current |
| cienaCesModuleSwMIBVer OBJECT-TYPE This MIB object shows the MIB version currently supported. | 1.3.6.1.4.1.1271.2.1.2.1.2.4.2.1.20 | DisplayString (SIZE(0..128)) | read-only | current |
| cienaCesModulePOSTErrorTable OBJECT-TYPE The (conceptual) table for viewing POST error on the modules. | 1.3.6.1.4.1.1271.2.1.2.1.2.5 | not-accessible | current | |
| cienaCesModulePOSTErrorEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModulePOSTErrorResultsTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1 | not-accessible | current | |
| cienaCesModulePOSTErrorIndex OBJECT-TYPE Index of the POST error for the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.1 | INTEGER | not-accessible | current |
| cienaCesModulePOSTErrorDescription OBJECT-TYPE A description of the module POST error. | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.2 | OCTET STRING | read-only | current |
| cienaCesModulePOSTErrorSeverity OBJECT-TYPE Severity of the POST error for the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.3 | INTEGER {unknown(0), fatal(1), severe(2), warning(3)} | read-only | current |
| cienaCesModulePOSTErrorScope OBJECT-TYPE Scope of the POST error for the module. | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.4 | INTEGER {unknown(0), chassis(1), blade(2), port(3)} | read-only | current |
| cienaCesModulePOSTScopeIndex OBJECT-TYPE When scope is a port this object identifies the port number. | 1.3.6.1.4.1.1271.2.1.2.1.2.5.1.5 | INTEGER | read-only | current |
| cienaCesModuleResourceHealthTable OBJECT-TYPE Table listing the health information of dataplane resources. | 1.3.6.1.4.1.1271.2.1.2.1.2.6 | not-accessible | current | |
| cienaCesModuleResourceHealthEntry OBJECT-TYPE An entry in the cienaCesModuleResourceHealthTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1 | not-accessible | current | |
| cienaCesModuleResourceHealthSubCategory OBJECT-TYPE The sub-category of the dataplane resource being monitored. - 'none' is an enumeration placeholder. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.1 | INTEGER {none(0), subPort(1), qosFlow(2), accessFlow(3), queueGroupInstance(4), schedulerInstance(5), pbtTransit(6), pltfmTokenBucket(7), pltfmEgressTunnel(8), pltfmVirtTcamEntries(9), pltfmAclTcamEntries(10), pltfmVOQ(11), pltfmCLScheduler(12), pltfmFQScheduler(13), pltfmEgressShapingCIR(14), pltfmBscp(15), pltfmHighRateTokenBucket(16), pltfmLowRateTokenBucket(17), pltfmParentMeter(18), pltfmChildMeter(19), pltfmL2UserTypes(20), logicalInterfaces(21), pltfmLmPowerBudget(22), pltfmPpIngressL2Xform(23), pltfmPpEgressL2Xform(24), pltfmPpInternalTcam(25), pltfmNpMaintPoint(26), pltfmNpMaintPointSession(27), pltfmNpFastTimer300Hz(28), pltfmNpFastTimer10msec(29), pltfmNpFastTimer100msec(30), pltfmNpFastTimer1sec(31), pltfmNpSlowTimer(32), pltfmNpWatchdogTimer(33), pltfmNpProtectionGroup(34)} | not-accessible | current |
| cienaCesModuleResourceDeviceIndx OBJECT-TYPE Index of the device being monitored. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.2 | Unsigned32 | not-accessible | current |
| cienaCesModuleResourceHealthState OBJECT-TYPE Health state of the dataplane resource being monitored. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.3 | TceHealthStatus | read-only | current |
| cienaCesModuleResourceHealthCurrMeasurement OBJECT-TYPE Current value of the dataplane resource being monitored. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.4 | Unsigned32 | read-only | current |
| cienaCesModuleResourceHealthMaxMeasurement OBJECT-TYPE The maximum recorded value of the dataplane resource being monitored. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.5 | Unsigned32 | read-only | current |
| cienaCesModuleResourceHealthMaxThreshold OBJECT-TYPE The maximum possible value for the dataplane resource being monitored. | 1.3.6.1.4.1.1271.2.1.2.1.2.6.1.6 | Unsigned32 | read-only | current |
| cienaCesModuleIDPTable OBJECT-TYPE The (conceptual) table listing the description of ID Prom contents of the modules. | 1.3.6.1.4.1.1271.2.1.2.1.2.8 | not-accessible | current | |
| cienaCesModuleIDPEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModuleIDPTable. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1 | not-accessible | current | |
| cienaCesModuleIDPEthBaseMac OBJECT-TYPE This object indicates the module Ethernet Base MAC address stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.1 | MacAddress | read-only | current |
| cienaCesModuleIDPEthBaseMacRange OBJECT-TYPE This object indicates the Ethernet MAC address range stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.2 | Integer32 | read-only | current |
| cienaCesModuleIDPModuleSerialNumber OBJECT-TYPE This object indicates the Module Serial Number stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.3 | DisplayString | read-only | current |
| cienaCesModuleIDPModelPartNumber OBJECT-TYPE This object indicates the Model Part Number stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.4 | DisplayString | read-only | current |
| cienaCesModuleIDPModelRevision OBJECT-TYPE This object indicates the Model Revision stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.5 | DisplayString | read-only | current |
| cienaCesModuleIDPProductID OBJECT-TYPE This object indicates the Module Product ID stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.6 | DisplayString | read-only | current |
| cienaCesModuleIDPMfgDate OBJECT-TYPE This object indicates the Manufactured Date stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.7 | DisplayString | read-only | current |
| cienaCesModuleIDPCleiCode OBJECT-TYPE This object indicates the CLEI Code stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.8 | DisplayString | read-only | current |
| cienaCesModuleIDPBarcode OBJECT-TYPE This object indicates the Barcode stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.9 | DisplayString | read-only | current |
| cienaCesModuleIDPSWCompat OBJECT-TYPE This object indicates the Software Compatibility Number stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.10 | Integer32 | read-only | current |
| cienaCesModuleIDPFTC OBJECT-TYPE This object indicates the Functional Test Count stored in the module IDP. | 1.3.6.1.4.1.1271.2.1.2.1.2.8.1.11 | Integer32 | read-only | current |
| cienaCesModuleNotifAttrs OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.1.3 | |||
| cienaCesModuleSystemProtectionMode OBJECT-TYPE This object indicates the protection mode of the system. | 1.3.6.1.4.1.1271.2.1.2.1.3.1 | INTEGER {unprotected(1), cold(2), warm(3), hot(4)} | accessible-for-notify | current |
| cienaCesModuleSwitchOverReason OBJECT-TYPE This object indicates the reason the SwitchOver happened. The following combinations determine the value of this object: CTM failure - Deprov mode - Cold FailOver User Initiated - Deprov Mode - Cold SwitchOver CTM failure - Audit mode - Hot FailOver User initiated - Audit mode - Hot SwitchOver. | 1.3.6.1.4.1.1271.2.1.2.1.3.2 | INTEGER {coldFailOver(1), coldSwitchOver(2), hotSwitchOver(3), hotFailOver(4)} | accessible-for-notify | current |
| cienaCesModuleNotifTable OBJECT-TYPE The (conceptual) table to define the notification variable bindings. | 1.3.6.1.4.1.1271.2.1.2.1.3.3 | not-accessible | current | |
| cienaCesModuleNotifEntry OBJECT-TYPE An entry (conceptual row) in the cienaCesModuleNotifEntryTable. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1 | not-accessible | current | |
| cienaCesModuleHealthCategory OBJECT-TYPE This object indicates the health category that the Health Manager monitors on the module. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.1 | TceHealthCategory | accessible-for-notify | current |
| cienaCesModuleHealthSubCategory OBJECT-TYPE This object indicates the health sub category that the Health Manager monitors on the module. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.2 | Unsigned32 | accessible-for-notify | current |
| cienaCesModuleHealthStatus OBJECT-TYPE This object indicates the current health status of health category and its sub category being monitored on the module. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.3 | TceHealthStatus | accessible-for-notify | current |
| cienaCesModuleHealthStatusLast OBJECT-TYPE This object indicates the last known health status of health category and its sub category being monitored on the module. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.4 | TceHealthStatus | accessible-for-notify | current |
| cienaCesModuleHealthOriginType OBJECT-TYPE This object indicates the origin of the health status notification. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.5 | HealthOriginType | accessible-for-notify | current |
| cienaCesModuleHealthOriginName OBJECT-TYPE This object indicates the origin name of the health status notification. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.6 | DisplayString (SIZE(0..10)) | accessible-for-notify | current |
| cienaCesModuleHealthOriginUnitId OBJECT-TYPE This object indicates the origin id of the health notification. | 1.3.6.1.4.1.1271.2.1.2.1.3.3.1.7 | Unsigned32 | accessible-for-notify | current |
| cienaCesModuleConformance OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.2 | |||
| cienaCesModuleMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.2.1 | |||
| cienaCesModuleMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.1.2.2.2 | |||
| cienaCesModuleMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.2.3 | |||
| cienaCesModuleMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.1271.2.2.3.0 |
Notifications
| Name | OID | Status |
|---|---|---|
| cienaCesModuleStateChangeNotification NOTIFICATION-TYPE A cienaCesModuleStateChange notification is sent when the operational state of the module is changed. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState. | 1.3.6.1.4.1.1271.2.2.3.0.1 | current |
| cienaCesModuleHealthStatusUnknownNotification NOTIFICATION-TYPE This notification is sent whenever the Health Manager detects a status change to unknown. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | 1.3.6.1.4.1.1271.2.2.3.0.2 | current |
| cienaCesModuleHealthStatusWarningNotification NOTIFICATION-TYPE This notification is sent whenever the Health Manager detects a status change to warning. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | 1.3.6.1.4.1.1271.2.2.3.0.3 | current |
| cienaCesModuleHealthStatusFaultedNotification NOTIFICATION-TYPE This notification is sent whenever the Health Manager detects a status change to faulted. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | 1.3.6.1.4.1.1271.2.2.3.0.4 | current |
| cienaCesModuleHealthStatusDegradedNotification NOTIFICATION-TYPE This notification is sent whenever the Health Manager detects a status change to degraded. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | 1.3.6.1.4.1.1271.2.2.3.0.5 | current |
| cienaCesModuleHealthStatusGoodNotification NOTIFICATION-TYPE This notification is sent whenever the Health Manager detects a status change to normal. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleTrapState for the module needs to be set to enabled. - cienaCesModuleAllModulesHealthTrapState needs to be set to enabled The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleHealthOriginType, cienaCesModuleHealthOriginName, cienaCesModuleHealthOriginUnitId, cienaCesModuleHealthCategory, cienaCesModuleHealthSubCategory, cienaCesModuleHealthStatus, and cienaCesModuleHealthStatusLast. | 1.3.6.1.4.1.1271.2.2.3.0.6 | current |
| cienaCesModuleSensorHighTempNotification NOTIFICATION-TYPE This notification is sent when the cienaCesModuleSensor temperature exceeds the high temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorHighTempThreshold. | 1.3.6.1.4.1.1271.2.2.3.0.7 | current |
| cienaCesModuleSensorLowTempNotification NOTIFICATION-TYPE This notification is sent when the cienaCesModuleSensor falls below the low temperature threshold for the module. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, and cienaCesModuleSensorLowTempThreshold. | 1.3.6.1.4.1.1271.2.2.3.0.8 | current |
| cienaCesModuleSensorNormalTempNotification NOTIFICATION-TYPE This notification is sent if the cienaCesModule temperature changes from previously reported high or low temperature exceeding thresholds to normal temperature. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleSensorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSensorNotifIndx, cienaCesModuleSensorDescription, cienaCesModuleSensorCurrentTemp, cienaCesModuleSensorLowTemp, and cienaCesModuleSensorHighTemp. | 1.3.6.1.4.1.1271.2.2.3.0.9 | current |
| cienaCesModuleHASwitchOverNotification NOTIFICATION-TYPE This notification is sent for CTM switchover. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleSwitchOverReason, cienaCesModuleAdminState, and cienaCesModuleOperState. | 1.3.6.1.4.1.1271.2.2.3.0.10 | current |
| cienaCesModuleProtectionModeColdNotification NOTIFICATION-TYPE This notification is sent when the protection mode of the system changes to cold. A COLD protection level is the lowest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM but a failure causing a failover would be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and reboot the PSLMs. The primary CTM will reapply the configuration to the PSLMs after they have booted. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | 1.3.6.1.4.1.1271.2.2.3.0.11 | current |
| cienaCesModuleProtectionModeWarmNotification NOTIFICATION-TYPE This notification is sent when the protection mode of the system changes to warm. This state is not supported on the 5410 platform. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | 1.3.6.1.4.1.1271.2.2.3.0.12 | current |
| cienaCesModuleProtectionModeUnprotectedNotification NOTIFICATION-TYPE This notification is sent when the protection mode of the system changes to unprotected. A protection level of unprotected implies that there is no secondary CTM present in the system or that the current secondary CTM is not in a state to provide any protection. In the case of the CTM failure, the primary CTM will reboot and subsequently reboot all the PSLMs, causing loss of existing switched traffic patterns. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | 1.3.6.1.4.1.1271.2.2.3.0.13 | current |
| cienaCesModuleProtectionModeHotNotification NOTIFICATION-TYPE This notification is sent when the protection mode of the system changes to hot. A HOT protection level is the highest level of protection. It implies that the secondary CTM is ready to assume the function of the primary CTM and a failure causing a failover would NOT be service impacting. The secondary CTM has been synchronized with the same software package, configuration files, etc such that it will return the same state as the previous primary CTM. The protection state of the primary CTM shall not transition from NONE to PROTECTED until the secondary CTM has completed the synchronization. In the case of a failure on the primary CTM, the secondary CTM will immediately assume primary status, finish its initialization and audit the PSLMs. All current established traffic patterns will be maintained with a minimal loss of traffic. Any unsaved configuration changes will NOT be lost on a failover as configuration changes are propagated to the secondary CTM configuration. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleProtectionModeTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, and cienaCesModuleSystemProtectionMode. | 1.3.6.1.4.1.1271.2.2.3.0.14 | current |
| cienaCesModulePostErrorNotification NOTIFICATION-TYPE This notification is sent when a module POST error is detected. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModulePOSTErrorTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, and cienaCesModulePOSTErrorDescription. | 1.3.6.1.4.1.1271.2.2.3.0.15 | current |
| cienaCesModuleFastReloadUnsuccessfulNotification NOTIFICATION-TYPE This notification is sent when the deprov (cold switchover or failover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState. | 1.3.6.1.4.1.1271.2.2.3.0.16 | current |
| cienaCesModuleHitlessModeUnsuccessfulNotification NOTIFICATION-TYPE This notification is sent when the audit (hot failover or switchover) fails. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled. - cienaCesModuleHATrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, cienaCesModuleSlotNotifIndx, cienaCesModuleAdminState, and cienaCesModuleOperState. | 1.3.6.1.4.1.1271.2.2.3.0.17 | current |
| cienaCesModuleSwitchFabricDisruptedUnrecoverableNotification NOTIFICATION-TYPE This notification is sent when the switch fabric detects a game-over failure and the system cannot automatically correct without resetting certain fabric subsystems. This kind of a disruption can cause a major service interruption. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx. | 1.3.6.1.4.1.1271.2.2.3.0.18 | current |
| cienaCesModuleSwitchFabricDisruptedRecoverableNotification NOTIFICATION-TYPE This notification is sent when the switch fabric detects game-over failure and the system can automatically correct it. To enable the device to send this notification: - cienaCesModuleAllModulesTrapState needs to be set to enabled - cienaCesModuleSwitchFabricDisruptedTrapState needs to be set to enabled. The above values are set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesModuleChassisNotifIndx, cienaCesModuleShelfNotifIndx, and cienaCesModuleSlotNotifIndx. | 1.3.6.1.4.1.1271.2.2.3.0.19 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| moduleConfigGroup OBJECT-GROUP A collection of objects providing information about configuration table. | 1.3.6.1.4.1.1271.2.1.2.2.2.1 | current |
| moduleDescriptionGroup OBJECT-GROUP A collection of objects providing information about module capabilities. | 1.3.6.1.4.1.1271.2.1.2.2.2.2 | current |
| moduleSensorGroup OBJECT-GROUP A collection of objects providing information of module temperature sensors. | 1.3.6.1.4.1.1271.2.1.2.2.2.3 | current |
| moduleNotifGroup NOTIFICATION-GROUP A collection of objects providing information about module notifications. | 1.3.6.1.4.1.1271.2.1.2.2.2.4 | current |
| modulePostErrorGroup OBJECT-GROUP A collection of objects providing information of module POST errors. | 1.3.6.1.4.1.1271.2.1.2.2.2.5 | current |