CAPWAP-DOT11-MIB
- Registered at
- 1.3.6.1.2.1.195
- Last updated
- 2010-04-30 00:00
- Organization
- IETF Control And Provisioning of Wireless Access Points (CAPWAP) Working Group http://www.ietf.org/html.charters/capwap-charter.html
- Revisions
- 2010-04-30 00:00
- Namespace
- standard
- Source file
CAPWAP-DOT11-MIB- Digest
sha256:abadcfe9de1c0b54619680fccfab45b8a0d761546b577bb1348c7372b2e0cad2
Description
Copyright (c) 2010 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this MIB module is part of RFC 5834; see the RFC itself for full legal notices. This MIB module contains managed object definitions for CAPWAP Protocol binding for IEEE 802.11.
Contact
General Discussion: capwap@frascone.com To Subscribe: http://lists.frascone.com/mailman/listinfo/capwap Yang Shi (editor) Hangzhou H3C Tech. Co., Ltd. Beijing R&D Center of H3C, Digital Technology Plaza NO. 9 Shangdi 9th Street, Haidian District Beijing 100085 China Phone: +86 010 82775276 Email: rishyang@gmail.com David T. Perkins (editor) 228 Bayview Dr. San Carlos, CA 94070 USA Phone: +1 408 394-8702 Email: dperkins@dsperkins.com Chris Elliott (editor) 1516 Kent St. Durham, NC 27707 USA Phone: +1 919-308-1216 Email: chelliot@pobox.com Yong Zhang (editor) Fortinet, Inc. 1090 Kifer Road Sunnyvale, CA 94086 USA Email: yzhang@fortinet.com
Imports
| From | Symbols |
|---|---|
| CAPWAP-BASE-MIB | CapwapBaseMacTypeTC, CapwapBaseTunnelModeTC |
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
CAPWAP-BASE-MIB CAPWAP-DOT11-MIB ENTITY-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC SYSAPPL-MIB UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| CapwapDot11WlanIdProfileTC TEXTUAL-CONVENTION Represents the unique identifier of a WLAN profile. | current | |||
| CapwapDot11WlanIdTC TEXTUAL-CONVENTION Represents the unique identifier of a Wireless Local Area Network (WLAN). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| capwapDot11Objects OBJECT-IDENTITY | 1.3.6.1.2.1.195.1 | |||
| capwapDot11WlanTable OBJECT-TYPE A table that allows the operator to display and configure WLAN profiles, such as specifying the MAC type and tunnel mode for a WLAN. Also, it helps the AC to configure a WLAN through the IEEE 802.11 MIB module. Values of all objects in this table are persistent at restart/reboot. | 1.3.6.1.2.1.195.1.1 | not-accessible | current | |
| capwapDot11WlanEntry OBJECT-TYPE A set of objects that stores the settings of a WLAN profile. | 1.3.6.1.2.1.195.1.1.1 | not-accessible | current | |
| capwapDot11WlanProfileId OBJECT-TYPE Represents the identifier of a WLAN profile that has a corresponding capwapDot11WlanProfileIfIndex. | 1.3.6.1.2.1.195.1.1.1.1 | CapwapDot11WlanIdProfileTC | not-accessible | current |
| capwapDot11WlanProfileIfIndex OBJECT-TYPE Represents the index value that uniquely identifies a WLAN Profile Interface. The interface identified by a particular value of this index is the same interface as identified by the same value of the ifIndex. The creation of a row object in the capwapDot11WlanTable triggers the AC to automatically create an WLAN Profile Interface identified by an ifIndex without manual intervention. Most MIB tables in the IEEE 802.11 MIB module [IEEE.802-11.2007] use an ifIndex to identify an interface to facilitate the configuration and maintenance, for example, dot11AuthenticationAlgorithmsTable. Using the ifIndex of a WLAN Profile Interface, the Operator could configure a WLAN through the IEEE 802.11 MIB module. | 1.3.6.1.2.1.195.1.1.1.2 | InterfaceIndex | read-only | current |
| capwapDot11WlanMacType OBJECT-TYPE Represents whether the WTP SHOULD support the WLAN in Local or Split MAC modes. | 1.3.6.1.2.1.195.1.1.1.3 | CapwapBaseMacTypeTC | read-create | current |
| capwapDot11WlanTunnelMode OBJECT-TYPE Represents the frame tunneling mode to be used for IEEE 802.11 data frames from all stations associated with the WLAN. Bits are exclusive with each other for a specific WLAN profile, and only one tunnel mode could be configured. If the operator set more than one bit, the value of the Response-PDU's error-status field is set to 'wrongValue', and the value of its error-index field is set to the index of the failed variable binding. | 1.3.6.1.2.1.195.1.1.1.4 | CapwapBaseTunnelModeTC | read-create | current |
| capwapDot11WlanRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. All the objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. Thus, to modify one or more of the objects in this conceptual row: a. change the row status to 'notInService', b. change the values of the row c. change the row status to 'active' The capwapDot11WlanRowStatus may be changed to 'active' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. When the operator deletes a WLAN profile, the AC SHOULD check whether the WLAN profile is bound with a radio. If yes, the value of the Response-PDU's error-status field is set to 'inconsistentValue', and the value of its error-index field is set to the index of the failed variable binding. If not, the row object could be deleted. | 1.3.6.1.2.1.195.1.1.1.5 | RowStatus | read-create | current |
| capwapDot11WlanBindTable OBJECT-TYPE A table that stores bindings between WLAN profiles (identified by capwapDot11WlanProfileId) and WTP Virtual Radio Interfaces. The WTP Virtual Radio Interfaces on the AC correspond to physical layer (PHY) radios on the WTPs. It also stores the mappings between WLAN IDs and WLAN Basic Service Set (BSS) Interfaces. Values of all objects in this table are persistent at restart/reboot. | 1.3.6.1.2.1.195.1.2 | not-accessible | current | |
| capwapDot11WlanBindEntry OBJECT-TYPE A set of objects that stores the binding of a WLAN profile to a WTP Virtual Radio Interface. It also stores the mapping between WLAN ID and WLAN BSS Interface. The INDEX object ifIndex is the ifIndex of a WTP Virtual Radio Interface. | 1.3.6.1.2.1.195.1.2.1 | not-accessible | current | |
| capwapDot11WlanBindWlanId OBJECT-TYPE Represents the WLAN ID of a WLAN. During a binding operation, the AC MUST select an unused WLAN ID from between 1 and 16 [RFC5416]. For example, to bind another WLAN profile to a radio that has been bound with a WLAN profile, WLAN ID 2 should be assigned. | 1.3.6.1.2.1.195.1.2.1.1 | CapwapDot11WlanIdTC | read-only | current |
| capwapDot11WlanBindBssIfIndex OBJECT-TYPE Represents the index value that uniquely identifies a WLAN BSS Interface. The interface identified by a particular value of this index is the same interface as identified by the same value of the ifIndex. The ifIndex here is for a WLAN BSS Interface. The creation of a row object in the capwapDot11WlanBindTable triggers the AC to automatically create a WLAN BSS Interface identified by an ifIndex without manual intervention. The PHY address of the capwapDot11WlanBindBssIfIndex is the BSSID. While manufacturers are free to assign BSSIDs by using any arbitrary mechanism, it is advised that where possible the BSSIDs are assigned as a contiguous block. When assigned as a block, implementations can still assign any of the available BSSIDs to any WLAN. One possible method is for the WTP to assign the address using the following algorithm: base BSSID address + WLAN ID. | 1.3.6.1.2.1.195.1.2.1.2 | InterfaceIndex | read-only | current |
| capwapDot11WlanBindRowStatus OBJECT-TYPE This variable is used to create, modify, and/or delete a row in this table. All the objects in a row can be modified only when the value of this object in the corresponding conceptual row is not 'active'. Thus, to modify one or more of the objects in this conceptual row: a. change the row status to 'notInService', b. change the values of the row c. change the row status to 'active' | 1.3.6.1.2.1.195.1.2.1.3 | RowStatus | read-create | current |
| capwapDot11Conformance OBJECT-IDENTITY | 1.3.6.1.2.1.195.2 | |||
| capwapDot11Groups OBJECT-IDENTITY | 1.3.6.1.2.1.195.2.1 | |||
| capwapDot11Compliances OBJECT-IDENTITY | 1.3.6.1.2.1.195.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| capwapDot11WlanGroup OBJECT-GROUP A collection of objects that is used to configure the properties of a WLAN profile. | 1.3.6.1.2.1.195.2.1.1 | current |
| capwapDot11WlanBindGroup OBJECT-GROUP A collection of objects that is used to bind the WLAN profiles with a radio. | 1.3.6.1.2.1.195.2.1.2 | current |
| capwapDot11Compliance MODULE-COMPLIANCE Describes the requirements for conformance to the CAPWAP-DOT11-MIB module. | 1.3.6.1.2.1.195.2.2.1 | current |