MIBs Depot

CADANT-CMTS-EQUIPMENT-MIB

Registered at
1.3.6.1.4.1.4998.1.1.10.1
Last updated
2009-03-03 00:00
Organization
Arris International, Inc.
Revisions
2009-03-03 00:00, 2009-01-05 00:00, 2008-10-14 00:00, 2008-10-01 00:00, 2008-07-03 00:00, 2008-06-18 00:00, 2008-04-28 00:00, 2008-04-02 00:00, 2008-02-25 00:00, 2007-11-05 00:00, 2007-01-10 00:00, 2006-11-13 00:00, 2006-09-12 00:00, 2006-08-23 00:00, 2006-02-14 00:00, 2005-08-30 00:00, 2005-04-06 00:00, 2005-02-04 00:00, 2005-01-24 00:00, 2004-12-01 00:00, 2004-11-18 00:00, 2004-11-11 00:00, 2004-09-07 00:00, 2004-07-23 00:00, 2004-03-22 00:00, 2004-03-18 00:00, 2004-02-04 00:00, 2003-12-18 00:00, 2003-03-31 00:00, 2003-03-17 00:00, 2003-03-05 00:00, 2003-03-02 00:00, 2003-01-29 00:00, 2002-12-14 00:00, 2002-11-07 00:00, 2002-09-25 00:00, 2002-09-01 00:00, 2002-05-01 00:00, 2001-12-28 16:30, 2001-12-21 16:30, 2001-10-03 00:00, 2001-07-17 00:00
Namespace
arris
Source file
CADANT-CMTS-EQUIPMENT-MIB
Digest
sha256:cac945c9ca03cec6e5d677d51d484ac056fea0270e6efbe368bfabca3d2a84aa

Description

This MIB is intended to describe all objects which are used to control and report on the state of a Cadant CMTS. These objects are used to perform the following functions on a Cadant CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipment-related traps

Contact

Arris Technical Support Phone: +1 630 281 3000 E-Mail: support@arrisi.com

Imports

FromSymbols
CADANT-PRODUCTS-MIBcadEquipment
CADANT-TCAdminState, CardId, CardSubType, CardType, DiskVolumeUsageLevel, DuplexStatus, EqActionType, FirmwareSource, FlowControlMode, PicType, PortDetectedMode, PortId, PortMode, PortType, PrimaryState, SecondaryState, ShelfId, UnknownState
DOCS-IF-MIBTenthdBmV
IF-MIBInterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

CADANT-CMTS-EQUIPMENT-MIB
CADANT-PRODUCTS-MIB
CADANT-TC
DOCS-IF-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Textual conventions

NameOIDSyntaxAccessStatus
TestCommand
TEXTUAL-CONVENTION
A set of commands applicable to this test. A value of noop will do nothing.
current
TestId
TEXTUAL-CONVENTION
Used as index to Test Tables.
current
TestResult
TEXTUAL-CONVENTION
Test Result.
current
TestSchedule
TEXTUAL-CONVENTION
A set of scheduling interval option applicable to this test only if Schedule is selected. This is recommended for hardware routine exercise (REX). The value expresses in multiple of hours. For example: 1 hour interval, 24 hour interval, 48 hour interval. A value of 0 indicate no scheduling option for this test.
current
TestScheduleCommand
TEXTUAL-CONVENTION
A set of periodic schedule command applicable to this test. This is used in conjunction with the TestSchedule and TestTime to specify the start time of the test. If the TestSchedule value is 0, then the test will be executed once at the time specified by the TestTime. For any other TestSchedule value, the test will be executed at time specified by the TestTime and repeated periodically base on the value specified by TestSchedule. A value of noop will do nothing.
current
TestTransactionId
TEXTUAL-CONVENTION
Transaction Id associated with a test or diagnostic. The EMS must populate the value of this object to be able to correlate the test sent and the result coming back.
current
TestType
TEXTUAL-CONVENTION
Indicates whether this is a 'Test', a 'Diagnostic', or unknown.
current

Objects

NameOIDSyntaxAccessStatus
equipmentTraps
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.0
systemGeneral
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.1
systemClock
OBJECT-TYPE
CMTS local date and time displayed as yyyy-mm-dd,hh:mm:ss.d,+/-hh:mm, where the date is yyyy-mmmm-dd and time in deci-seconds is hh:mm:ss.d, adn teh current offset from GMT is +/-hh:mm. This object is adjusted by teh TZ and DST rules. E.g. 2002-5-26,13;30:15.0,-4:0
1.3.6.1.4.1.4998.1.1.10.1.1.1DateAndTimeaccessible-for-notifycurrent
trapCounter
OBJECT-TYPE
This is the trap sequence number that increments each time a trap is sent. It is persistent across resets.
1.3.6.1.4.1.4998.1.1.10.1.1.2Counter32read-onlycurrent
trapSeverity
OBJECT-TYPE
Severity level of a Cadant trap.
1.3.6.1.4.1.4998.1.1.10.1.1.3INTEGER {cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6), informational(7)}read-onlycurrent
systemKey
OBJECT-TYPE
The systemKey is a unique string used for Candant's CMTS identification. The EMS uses this key string as well as the sysOid in the MIB-II system group MIB to identify Candant's CMTS's.
1.3.6.1.4.1.4998.1.1.10.1.1.4DisplayStringread-onlycurrent
cardNumber
OBJECT-TYPE
Card Id used in traps. A value 99 indicates an invalid cardNumber.
1.3.6.1.4.1.4998.1.1.10.1.1.98CardIdaccessible-for-notifycurrent
portNumber
OBJECT-TYPE
Port Id used in traps. A value of 99 indicates an invalid portNumber.
1.3.6.1.4.1.4998.1.1.10.1.1.99PortIdaccessible-for-notifycurrent
diskDriveNumber
OBJECT-TYPE
Disk drive ID use in a Cadant trap. A value of 99 indicates an invalid diskDriveNumber
1.3.6.1.4.1.4998.1.1.10.1.1.100Integer32 (0..99)accessible-for-notifycurrent
diskVolumeNumber
OBJECT-TYPE
Disk volume ID use in a Cadant trap. A value of 99 indicates an invalid diskVolumeNumber
1.3.6.1.4.1.4998.1.1.10.1.1.101Integer32 (0..99)accessible-for-notifycurrent
shelfObjects
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.2
shelfNumber
OBJECT-TYPE
The instance identifier of a Cadant CMTS in a multi-Cadant CMTS configuration. This shelfNumber is used in traps. A value of 99 indicates an invalid shelfNumber.
1.3.6.1.4.1.4998.1.1.10.1.2.1ShelfIdread-onlydeprecated
shelfName
OBJECT-TYPE
A string that represents the name of this machine and may uniquely identify it from other network devices.
1.3.6.1.4.1.4998.1.1.10.1.2.2DisplayStringread-writecurrent
shelfSwVersion
OBJECT-TYPE
The software version currently executing.
1.3.6.1.4.1.4998.1.1.10.1.2.3DisplayStringread-onlycurrent
equipmentState
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.3
cardLastChangeTime
OBJECT-TYPE
The value of sysUpTime at the time any of the objects in cardTable last changed.
1.3.6.1.4.1.4998.1.1.10.1.3.2TimeStampread-onlycurrent
portLastChangeTime
OBJECT-TYPE
The value of sysUpTime at the time any of the objects in portTable last changed.
1.3.6.1.4.1.4998.1.1.10.1.3.3TimeStampread-onlycurrent
equipmentTbl
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.4
cardTable
OBJECT-TYPE
A table of card or circuit pack information.
1.3.6.1.4.1.4998.1.1.10.1.4.2not-accessiblecurrent
cardEntry
OBJECT-TYPE
A conceptual row containing pertinent information about a card or a circuit pack.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1not-accessiblecurrent
cardShelfId
OBJECT-TYPE
The unique id the shelf that contains this card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.1ShelfIdread-onlyobsolete
cardId
OBJECT-TYPE
The unique id of this card within the shelf. The convention of cardId is as follows: - Indices from 1 to 50 [1 - 50] are reserved for Circuit Packs. In this case, the cardId is 1 plus the 0-based slot number. - Indices from 51 to 98 [51 - 98] are reserved for Auxilliary Devices in within a shelf. Auxilliary Devices or Modules could be Fan Module, Power Module, Tape Drive and or Disc-Drive. In this case, the cardName and cardType indentify the Auxilliary Devices. Not all of row attributes are applicable for Auxilliary Devices.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.2CardIdnot-accessiblecurrent
cardName
OBJECT-TYPE
This is the name of the card, if it has one.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.3DisplayString (SIZE(0..64))read-writecurrent
cardType
OBJECT-TYPE
The type of card, if any. For example Ecard, Fcard, Dcard or Ucard If the slot is empty, the value would be 'empty'.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.4CardTyperead-onlycurrent
cardSubType
OBJECT-TYPE
The cardType alone may not be specific enough to fully describe the type of card that is in this slot. For example, a card type of Dcard might have a more specific type of 1D8U with integrated upconverter. If the card needs no further specificication that the cardType, then the value of cardSubType is 'none'. Not yet implemented.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.5CardSubTyperead-writecurrent
cardSerialNum
OBJECT-TYPE
This is the serial number of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.6DisplayString (SIZE(0..32))read-onlycurrent
cardFwVersion
OBJECT-TYPE
This is the firmware or FPGA version number of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.7DisplayString (SIZE(0..128))read-onlycurrent
cardHwVersion
OBJECT-TYPE
This is the hardware version of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.8DisplayString (SIZE(0..128))read-onlycurrent
cardSwVersion
OBJECT-TYPE
This is the software version of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.9DisplayString (SIZE(0..64))read-onlycurrent
cardAdminState
OBJECT-TYPE
This is the administrative state of this card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.12AdminStateread-writecurrent
cardPrState
OBJECT-TYPE
This is the primary state of this card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.13PrimaryStateread-onlycurrent
cardSecState
OBJECT-TYPE
This is the secondary state of this card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.14SecondaryStateread-onlycurrent
cardDplxStatus
OBJECT-TYPE
This is the duplexing status of this card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.15DuplexStatusread-onlycurrent
cardAction
OBJECT-TYPE
Write-only action performed on this card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.17EqActionTyperead-writecurrent
cardTrapInh
OBJECT-TYPE
If a bit is set, the corresponding state change trap will not be sent.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.18Bits {primary(0), secondary(1), duplex(2), detected(3), tempoutofrange(4), tempnoreport(5), tempoverheat(6)}read-writecurrent
cardNumPorts
OBJECT-TYPE
Number of ports this card contains.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.19Integer32 (0..50)read-onlycurrent
cardDetected
OBJECT-TYPE
CardType dectected automatically by the CMTS.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.20CardTyperead-onlycurrent
cardSubDetected
OBJECT-TYPE
CardSubType dectected automatically by the CMTS.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.21CardSubTyperead-onlycurrent
cardFwUpdateStatus
OBJECT-TYPE
Set to TRUE if a firmware update is in progress or has been done, else set to FALSE.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.23TruthValueread-onlycurrent
cardSpareGroupId
OBJECT-TYPE
The cardId of the spare group leader for this sparing group. This value will be set to the invalid card id for all cards not associated with a sparing group.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.24CardIdread-writecurrent
cardSpareGroupMode
OBJECT-TYPE
The admin mode of the spare group leader for this sparing group. This value will be set to the invalid card id for all cards not associated with a sparing group.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.25INTEGER {manual(1), auto(2), invalid(99)}read-writecurrent
cardUpTime
OBJECT-TYPE
The value of sysUpTime when the primary state for this card made a transition from OOS to IS.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.26TimeTicksread-onlycurrent
cardTemperature
OBJECT-TYPE
The current operational temperature of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.29Integer32 (-30..120 | 999)read-onlycurrent
cardCpuType
OBJECT-TYPE
The current CPU type of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.30DisplayString (SIZE(0..25))read-onlycurrent
cardCpuSpeed
OBJECT-TYPE
The current CPU speed of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.31Unsigned32read-onlycurrent
cardBusSpeed
OBJECT-TYPE
The current bus speed of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.32Unsigned32read-onlycurrent
cardRamSize
OBJECT-TYPE
The current size of installed RAM of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.33Unsigned32read-onlycurrent
cardFlashSize
OBJECT-TYPE
The current size of installed FLASH of the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.34Unsigned32read-onlycurrent
cardCPLDVersion
OBJECT-TYPE
The current version of CPLD installed on the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.35DisplayString (SIZE(0..32))read-onlycurrent
cardFpgaSource
OBJECT-TYPE
The source of the running version of the FPGAs on the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.36FirmwareSourceread-onlycurrent
cardBootVersion
OBJECT-TYPE
The current versions of the boot loaders installed on the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.37DisplayString (SIZE(0..90))read-onlycurrent
cardLastBootVersion
OBJECT-TYPE
The last version of the boot loader used on the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.38DisplayString (SIZE(0..20))read-onlycurrent
cardLastBootSource
OBJECT-TYPE
The source of the version of the bootloader last used on the card.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.39FirmwareSourceread-onlycurrent
cardPicDetected
OBJECT-TYPE
The type of PIC detected in this slot.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.40PicTyperead-onlycurrent
cardPicSerialNum
OBJECT-TYPE
This is the serial number of the PIC.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.41DisplayString (SIZE(0..32))read-onlycurrent
cardPicHwVersion
OBJECT-TYPE
This is the hardware version of the PIC.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.42DisplayString (SIZE(0..20))read-onlycurrent
cardLastResetReason
OBJECT-TYPE
The reason for the latest card recovery.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.43DisplayString (SIZE(0..64))read-onlycurrent
cardTemperatureHighWarn
OBJECT-TYPE
The temperature of the card at which warnings are generated.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.44Integer32read-writecurrent
cardTemperatureHighError
OBJECT-TYPE
The temperature of the card at which recoveries are initiated.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.45Integer32read-writecurrent
cardCarrierSerialNum
OBJECT-TYPE
This is the serial number of the carrier card, and valid only for DMM/MPM cards.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.46DisplayString (SIZE(0..32))read-onlycurrent
cardCarrierFwVersion
OBJECT-TYPE
This is the firmware version of the carrier card, and valid only for DMM/MPM cards.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.47DisplayString (SIZE(0..128))read-onlycurrent
cardCarrierHwVersion
OBJECT-TYPE
This is the hardwarer versioin of the carrier card, and valid only for DMM/MPM cards.
1.3.6.1.4.1.4998.1.1.10.1.4.2.1.48DisplayString (SIZE(0..128))read-onlycurrent
portTable
OBJECT-TYPE
A table of Ports information.
1.3.6.1.4.1.4998.1.1.10.1.4.3not-accessiblecurrent
portEntry
OBJECT-TYPE
A conceptual row containing pertinent information about a port owned by a card.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1not-accessiblecurrent
portShelfId
OBJECT-TYPE
The unique id of the shelf this port belongs to.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.1ShelfIdread-onlydeprecated
portCardId
OBJECT-TYPE
The unique id of the card this port belongs to.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.2CardIdnot-accessiblecurrent
portId
OBJECT-TYPE
The unique id of this port within a card. the shelfId, the cardId and portId uniquely identify a port
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.3PortIdnot-accessiblecurrent
portType
OBJECT-TYPE
Type of this port.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.4PortTyperead-onlycurrent
portAdminState
OBJECT-TYPE
The Admin state of this port
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.6AdminStateread-writecurrent
portPrState
OBJECT-TYPE
The primary state of this port
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.7PrimaryStateread-onlycurrent
portSecState
OBJECT-TYPE
The secondary state of this port
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.8SecondaryStateread-onlycurrent
portDplxStatus
OBJECT-TYPE
The port Duplexing status.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.9DuplexStatusread-onlycurrent
portAction
OBJECT-TYPE
Write-only action performed on a Port.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.11EqActionTyperead-writecurrent
portTrapInh
OBJECT-TYPE
If a bit is set, the corresponding state change trap will not be sent.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.12Bits {primary(0), secondary(1), duplex(2), linkUpLinkDown(3)}read-writecurrent
portNumChans
OBJECT-TYPE
Number of channels this port contains.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.13Integer32 (0..50)read-onlycurrent
portDocsIfIndex
OBJECT-TYPE
This object is here just in case a Port component does have a one to one correspondent with the IfTable. Example: D card in Cadant's CMTS system contains 8 ports, 1 for downstream channel and up to 3 upstream channels. Each channel will correspond to an ifIndex as specified in the ipcdn-rf-interface-mib. In this case, this object MUST have the same value as of ifIndex. A -1 indicates that this port does not have an association in the Iftable.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.14InterfaceIndexOrZeroread-onlycurrent
portMacAddress
OBJECT-TYPE
The physical address value for this card. This value is used to populate the ifPhysAddress field in the IfTable and other Tables in docsis RFC MIBs.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.15MacAddressread-onlycurrent
portMode
OBJECT-TYPE
The desired operating mode of an ethernet port. Not yet implemented.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.16PortModeread-writecurrent
portDetectedMode
OBJECT-TYPE
The current operating mode of an ethernet port.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.17PortDetectedModeread-onlycurrent
portBgpId
OBJECT-TYPE
The bridge group port id for this port.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.19Integer32 (-2147483647..2147483647)read-onlycurrent
portConnectorId
OBJECT-TYPE
For portType = uport, the rear pic connector this port is mapped to. Otherwise, the value of this object is invalid(99).
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.20PortIdread-writecurrent
portCardSubType
OBJECT-TYPE
The CardSubType of the card this port belongs to.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.21CardSubTyperead-onlycurrent
portDescription
OBJECT-TYPE
A persistent copy of ifAlias for this interface.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.27DisplayString (SIZE(0..64))read-writecurrent
portCurrDsPower
OBJECT-TYPE
The latest downstream power level reported by the port. This is valid on for ports of type dport.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.28TenthdBmVread-onlycurrent
portMinDsPower
OBJECT-TYPE
The latest downstream power level reported by the port. This is valid on for ports of type dport.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.29TenthdBmVread-onlycurrent
portMaxDsPower
OBJECT-TYPE
The latest downstream power level reported by the port. This is valid on for ports of type dport.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.30TenthdBmVread-onlycurrent
portTxFlowControlMode
OBJECT-TYPE
The transmit flow control settings for this port (network ports only).
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.31FlowControlModeread-writecurrent
portRxFlowControlMode
OBJECT-TYPE
The receive flow control settings for this port (network ports only).
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.32FlowControlModeread-writecurrent
portTxFlowControlDetected
OBJECT-TYPE
The reported transmit flow control settings for this port (network ports only).
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.33FlowControlModeread-onlycurrent
portRxFlowControlDetected
OBJECT-TYPE
The reported receive flow control settings for this port (network ports only).
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.34FlowControlModeread-onlycurrent
portMacIfIndex
OBJECT-TYPE
The MAC IfIndex currently associcated with the RF port.
1.3.6.1.4.1.4998.1.1.10.1.4.3.1.35InterfaceIndexOrZeroread-onlycurrent
diskVolumeTable
OBJECT-TYPE
A table of disk volume information.
1.3.6.1.4.1.4998.1.1.10.1.4.4not-accessiblecurrent
diskVolumeEntry
OBJECT-TYPE
A conceptual row containing pertinent information about a disk volume
1.3.6.1.4.1.4998.1.1.10.1.4.4.1not-accessiblecurrent
diskVolumeShelfId
OBJECT-TYPE
The unique id of the shelf this disk volume belongs to.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.1ShelfIdread-onlydeprecated
diskVolumeCardId
OBJECT-TYPE
The unique id of the card this disk volume belongs to.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.2CardIdnot-accessiblecurrent
diskVolumeDriveId
OBJECT-TYPE
The unique id of the disk drive this disk volume belongs to. A value of 99 indicates an invalid disk drive
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.3Integer32 (1..99)not-accessiblecurrent
diskVolumeId
OBJECT-TYPE
The unique id of this disk volume. the diskVolumeShelfId, the diskVolumeCardId, the diskVolumeDiskId, and the. A value of 99 indicate an invalid volume
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.4Integer32 (1..99)not-accessiblecurrent
diskVolumeName
OBJECT-TYPE
The name of the disk volume.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.5DisplayStringread-onlycurrent
diskVolumeSize
OBJECT-TYPE
The disk volume size in units of 512 bytes.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.6Integer32read-onlycurrent
diskVolumeUsageLevel
OBJECT-TYPE
The disk volume usage level.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.7DiskVolumeUsageLevelread-onlycurrent
diskVolumeUsagePercentage
OBJECT-TYPE
The disk volume usage percentage.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.8Integer32 (0..100)read-onlycurrent
diskVolumeUsageCriticalThreshold
OBJECT-TYPE
Usage percentage level when exceed will cause a diskVolumeUsageNotification trap to be sent with diskVolumeUsageLevel of diskVolumeUsageCritical.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.9Integer32 (0..100)read-writecurrent
diskVolumeUsageMajorThreshold
OBJECT-TYPE
Usage percentage level when exceed will cause a diskVolumeUsageNotification trap to be sent with diskVolumeUsageLevel of diskVolumeUsageMajor.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.10Integer32 (0..100)read-writecurrent
diskVolumeUsageMinorThreshold
OBJECT-TYPE
Usage percentage level when exceed will cause a diskVolumeUsageNotification trap to be sent with diskVolumeUsageLevel of diskVolumeUsageMinor.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.11Integer32 (0..100)read-writecurrent
diskVolumeAutoDeleteUnusedFile
OBJECT-TYPE
When set to TRUE to the system will automatically delete unused files when diskVolumeUsage exceed the diskVolumeUsageCriticalThreshold value.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.12TruthValueread-writecurrent
diskVolumeTrapInh
OBJECT-TYPE
If a bit is set, the corresponding trap will not be sent.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.13Bits {criticalUsageLevel(0), majorUsageLevel(1), minorUsageLevel(2), autoDeleteFiles(3)}read-writecurrent
diskVolumeDiskSize
OBJECT-TYPE
Total physical disk capacity in bytes.
1.3.6.1.4.1.4998.1.1.10.1.4.4.1.14Integer32read-onlycurrent
diskVolumeFileName
OBJECT-TYPE
The name of a file on the disk volume use for trap notification.
1.3.6.1.4.1.4998.1.1.10.1.4.5DisplayStringaccessible-for-notifycurrent
equipmentDiag
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.5
eqDiagConfig
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.5.1
remainInDiagMode
OBJECT-TYPE
When set to TRUE, the device being diagnosed will remain in diagnostic state when the diagnostic test is completed. When set to FALSE, the device will revert to its original state when the diagnostic test is completed.
1.3.6.1.4.1.4998.1.1.10.1.5.1.1TruthValueread-writecurrent
consoleOutput
OBJECT-TYPE
If true then the diagnostic result will be displayed on the system console.
1.3.6.1.4.1.4998.1.1.10.1.5.1.2TruthValuenot-accessibleobsolete
verboseLevel
OBJECT-TYPE
Verbose output level for diagnostic console output display. Higher number indicate more detailed output.
1.3.6.1.4.1.4998.1.1.10.1.5.1.3Integer32 (0..2)read-writecurrent
diagTestId
OBJECT-TYPE
Test Identification Number. Used in cardTestResultNotification variable-binding
1.3.6.1.4.1.4998.1.1.10.1.5.2TestIdaccessible-for-notifycurrent
cardTestTable
OBJECT-TYPE
A table of test available for a card.
1.3.6.1.4.1.4998.1.1.10.1.5.3not-accessiblecurrent
cardTestEntry
OBJECT-TYPE
A conceptual row containing information about tests or dignostics available for a card.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1not-accessiblecurrent
cardShelfTestIndex
OBJECT-TYPE
Shelf Identification Number taken from the Shelf Table. Used as index.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.1ShelfIdread-onlydeprecated
cardTestIndex
OBJECT-TYPE
Card Identification Number taken from the CardTable. Used as index.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.2CardIdnot-accessiblecurrent
cardTestId
OBJECT-TYPE
Test Identification Number. Used as index to test table
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.3TestIdnot-accessiblecurrent
cardTestName
OBJECT-TYPE
A unique name for this test.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.4DisplayString (SIZE(0..100))read-onlycurrent
cardTestType
OBJECT-TYPE
Test Type.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.5TestTyperead-onlycurrent
cardTestDescription
OBJECT-TYPE
A short description of the test.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.6DisplayStringread-onlycurrent
cardTestCommand
OBJECT-TYPE
Command to be execute this test on this shelf
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.7TestCommandread-writecurrent
cardTestScheduleCommand
OBJECT-TYPE
Schedule Command to be execute this test on this shelf
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.8TestScheduleCommandread-writecurrent
cardTestSchedule
OBJECT-TYPE
Test Scheduling.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.9TestScheduleread-writecurrent
cardTestTime
OBJECT-TYPE
Test start time.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.10DateAndTimeread-writecurrent
cardTestResult
OBJECT-TYPE
Result of the test.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.11TestResultread-onlycurrent
cardTestResultDesc
OBJECT-TYPE
Additional information of the test result.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.12DisplayStringread-onlycurrent
cardTestTransId
OBJECT-TYPE
Test transaction Id.
1.3.6.1.4.1.4998.1.1.10.1.5.3.1.13TestTransactionIdread-writecurrent
equipmentAudit
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.6
auditAutoScheduling
OBJECT-TYPE
Enable or disable automatic audit execution.
1.3.6.1.4.1.4998.1.1.10.1.6.1TruthValueread-writecurrent
auditLogOutput
OBJECT-TYPE
Enable or disable logging of error entries to system log.
1.3.6.1.4.1.4998.1.1.10.1.6.2TruthValueread-writecurrent
auditLogThrottle
OBJECT-TYPE
Enable or disable audit log output throttling to prevent audit errors from flooding the log.
1.3.6.1.4.1.4998.1.1.10.1.6.3TruthValueread-writecurrent
auditTable
OBJECT-TYPE
A table of test available for a card.
1.3.6.1.4.1.4998.1.1.10.1.6.4not-accessiblecurrent
auditEntry
OBJECT-TYPE
A conceptual row contains information about Audits.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1not-accessiblecurrent
auditShelfId
OBJECT-TYPE
Shelf Identification Number taken from the Shelf Table. Used as index.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.1ShelfIdread-onlydeprecated
auditCardId
OBJECT-TYPE
Card Identification Number taken from the CardTable. Used as index.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.2CardIdnot-accessiblecurrent
auditId
OBJECT-TYPE
Unique ID of the internal Audit
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.3Unsigned32not-accessiblecurrent
auditName
OBJECT-TYPE
Name of the internal Audit
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.4DisplayStringread-onlycurrent
auditDescription
OBJECT-TYPE
Description of the Audit
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.5DisplayStringread-onlycurrent
auditTime
OBJECT-TYPE
Start time of the audit.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.6DateAndTimeread-onlycurrent
auditCommand
OBJECT-TYPE
Audit Commands. The runnow command will stop the currently running audit sequence and start executing requested audit immediated. If enabled, automatic audit schedule will be restarted.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.7INTEGER {enable(1), disable(2), runnow(4)}read-writecurrent
auditStatus
OBJECT-TYPE
Audit status.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.8INTEGER {enable(1), disable(2)}read-onlycurrent
auditResult
OBJECT-TYPE
Audit Result.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.9INTEGER {passed(1), failed(2), abort(4), notRun(5)}read-onlycurrent
auditPassedCount
OBJECT-TYPE
Number of passed entry during previous audit run.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.10Unsigned32read-onlycurrent
auditFailedCount
OBJECT-TYPE
Number of failed entry during previous audit run.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.11Unsigned32read-onlycurrent
auditCycleCount
OBJECT-TYPE
Number of audit run completed.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.12Unsigned32read-onlycurrent
auditTotalPassedCount
OBJECT-TYPE
Number of cumulative passed entry of all audit runs.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.13Unsigned32read-onlycurrent
auditTotalFailedCount
OBJECT-TYPE
Number of cumulative failed entry of all audit runs.
1.3.6.1.4.1.4998.1.1.10.1.6.4.1.14Unsigned32read-onlycurrent
cmDevice
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.8
cmMacAddress
OBJECT-TYPE
The MAC address for the cable modem
1.3.6.1.4.1.4998.1.1.10.1.8.1MacAddressaccessible-for-notifycurrent
cmVendor
OBJECT-TYPE
The vendor name of the cable modem
1.3.6.1.4.1.4998.1.1.10.1.8.2DisplayStringaccessible-for-notifycurrent
cmResetReason
OBJECT-TYPE
The reason for the cable modem to reset
1.3.6.1.4.1.4998.1.1.10.1.8.3DisplayStringaccessible-for-notifycurrent
cmUChannelID
OBJECT-TYPE
The CMTS upstream channel ID which is connected to the cable modem
1.3.6.1.4.1.4998.1.1.10.1.8.4Integer32 (0..255)accessible-for-notifycurrent
cmPrimarySID
OBJECT-TYPE
The primary Service Identifier (SID) assigned by the CMTS associated with the cable modem
1.3.6.1.4.1.4998.1.1.10.1.8.5Unsigned32 (0..16383)accessible-for-notifycurrent
cmResetStatus
OBJECT-TYPE
The cable modem status before it resets
1.3.6.1.4.1.4998.1.1.10.1.8.6DisplayStringaccessible-for-notifycurrent
cmResetUpTime
OBJECT-TYPE
This value indicates how long in hundreds of seconds the cable modem is up since it is initial ranged
1.3.6.1.4.1.4998.1.1.10.1.8.7TimeTicksaccessible-for-notifycurrent
cmResetInfo
OBJECT-TYPE
The additional information for the cable modem to reset
1.3.6.1.4.1.4998.1.1.10.1.8.8DisplayStringaccessible-for-notifycurrent
cmIpAddress
OBJECT-TYPE
The IP Address of the cable modem
1.3.6.1.4.1.4998.1.1.10.1.8.9OCTET STRING (SIZE(4 | 16))accessible-for-notifycurrent
equipmentError
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.9
fpgaErrorEventTable
OBJECT-TYPE
Overrides default handling of FPGA error events.
1.3.6.1.4.1.4998.1.1.10.1.9.1not-accessiblecurrent
fpgaErrorEventEntry
OBJECT-TYPE
A conceptual row containing information about FPGA error event handling.
1.3.6.1.4.1.4998.1.1.10.1.9.1.1not-accessiblecurrent
errEventId
OBJECT-TYPE
Event ID associated with the FPGA error. A row in this table defines behavior for a specific FPGA error that overrides the default behavior of the system.
1.3.6.1.4.1.4998.1.1.10.1.9.1.1.1Unsigned32 (0..4294967295)not-accessiblecurrent
errEvRecoveryEnabled
OBJECT-TYPE
If true, the card can be recovered when this FPGA error is detected. When the card is recovered depends on the setting of errEvRecoveryThreshold. If this value is false, the card will not be recovered when this error is detected.
1.3.6.1.4.1.4998.1.1.10.1.9.1.1.2TruthValueread-createcurrent
errEvLoggingEnabled
OBJECT-TYPE
If true, the card will provide notification of the occurance of the this error. When the notification occurs is dependent on the setting of errEvLogThrottleThreshold. The severity of the notification is determined by the setting of errEvLogLevel.
1.3.6.1.4.1.4998.1.1.10.1.9.1.1.3TruthValueread-createcurrent
errEvLogLevel
OBJECT-TYPE
If errEvLoggingEnabled is true, this setting sets the severity level of the generated notification. In general, higher values indicate lower severity.
1.3.6.1.4.1.4998.1.1.10.1.9.1.1.4Integer32 (1..8)read-createcurrent
errEvRowStatus
OBJECT-TYPE
The only set actions supported on this table are createAndGo(4) and destroy(6).
1.3.6.1.4.1.4998.1.1.10.1.9.1.1.5RowStatusread-createcurrent
cadEquipmentMibConformance
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.10
cadEquipmentMibCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.10.1
cadEquipmentMibGroup
OBJECT-IDENTITY
1.3.6.1.4.1.4998.1.1.10.1.10.2

Notifications

NameOIDStatus
cardPrStateChange
NOTIFICATION-TYPE
This trap is sent whenever the card's Primary state changes.
1.3.6.1.4.1.4998.1.1.10.1.0.5current
cardSecStateChange
NOTIFICATION-TYPE
This trap is sent whenever the card's Secondary state changes.
1.3.6.1.4.1.4998.1.1.10.1.0.6current
cardDetectedChange
NOTIFICATION-TYPE
This trap is sent whenever a new card is detected.
1.3.6.1.4.1.4998.1.1.10.1.0.7current
cardDplxStatusChange
NOTIFICATION-TYPE
This trap is sent whenever the card's Duplex status changes.
1.3.6.1.4.1.4998.1.1.10.1.0.8current
portPrStateChange
NOTIFICATION-TYPE
This trap is sent whenever the port's Primary state changes.
1.3.6.1.4.1.4998.1.1.10.1.0.9current
portSecStateChange
NOTIFICATION-TYPE
This trap is sent whenever the port's Secondary state changes.
1.3.6.1.4.1.4998.1.1.10.1.0.10current
portDplxStatusChange
NOTIFICATION-TYPE
This trap is sent whenever the port's Duplex status changes.
1.3.6.1.4.1.4998.1.1.10.1.0.11current
cardTestResultNotification
NOTIFICATION-TYPE
This trap is sent when a test or diagnostic completed on a card.
1.3.6.1.4.1.4998.1.1.10.1.0.13current
cmResetClearNotification
NOTIFICATION-TYPE
This trap is sent when a CM is on-line from previous flap.
1.3.6.1.4.1.4998.1.1.10.1.0.15current
cmResetNotification
NOTIFICATION-TYPE
This trap is sent when a CM is reset.
1.3.6.1.4.1.4998.1.1.10.1.0.16current
diskVolumeUsageNotification
NOTIFICATION-TYPE
This trap is sent when a disk volume usage level exceed a disk usage threshold.
1.3.6.1.4.1.4998.1.1.10.1.0.17current
diskVolumeAutoDeleteFileNotification
NOTIFICATION-TYPE
This trap is sent when a file is automatically deleted by the system in respond to disk volume usage exceed critical thresholh.
1.3.6.1.4.1.4998.1.1.10.1.0.18current
cardTempOutOfRangeNotification
NOTIFICATION-TYPE
This trap is sent when the card temperature is out of range.
1.3.6.1.4.1.4998.1.1.10.1.0.19current
cardTempNoReportNotification
NOTIFICATION-TYPE
This trap is sent when there is no reporting on card temperature.
1.3.6.1.4.1.4998.1.1.10.1.0.20current
cardTempOverHeatNotification
NOTIFICATION-TYPE
This trap is sent when the card is overheat, card is being shut down.
1.3.6.1.4.1.4998.1.1.10.1.0.21current
downstreamPowerLoss
NOTIFICATION-TYPE
This trap is sent when c4 detects the loss of downstream power.
1.3.6.1.4.1.4998.1.1.10.1.0.22current
cmRegistrationNotification
NOTIFICATION-TYPE
This trap is sent when a CM is registered.
1.3.6.1.4.1.4998.1.1.10.1.0.23current

Conformance

NameOIDStatus
cadEquipmentMibCompliance
MODULE-COMPLIANCE
The compliance statement for entities which implement the Equipment MIB.
1.3.6.1.4.1.4998.1.1.10.1.10.1.1current
systemGeneralGroup
OBJECT-GROUP
This group contains a collection of objects general to the overall system.
1.3.6.1.4.1.4998.1.1.10.1.10.2.1current
equipmentStateGroup
OBJECT-GROUP
This group contains a collection of objects general to the state of the equipments.
1.3.6.1.4.1.4998.1.1.10.1.10.2.2current
equipmentShelfGroup
OBJECT-GROUP
This group contains a collection of objects general specific to shelf objects.
1.3.6.1.4.1.4998.1.1.10.1.10.2.3current
equipmentCardGroup
OBJECT-GROUP
This group contains a collection of objects general specific to Card table.
1.3.6.1.4.1.4998.1.1.10.1.10.2.4current
equipmentPortGroup
OBJECT-GROUP
This group contains a collection of objects specific to Port table.
1.3.6.1.4.1.4998.1.1.10.1.10.2.5current
equipmentDiagGroup
OBJECT-GROUP
This group contains a collection of objects specific to equipment diagnostics.
1.3.6.1.4.1.4998.1.1.10.1.10.2.6current
equipmentCardTestGroup
OBJECT-GROUP
This group contains a collection of objects specific to card Test group
1.3.6.1.4.1.4998.1.1.10.1.10.2.8current
equipmentAuditGroup
OBJECT-GROUP
This group contains a collection of objects specific audit group.
1.3.6.1.4.1.4998.1.1.10.1.10.2.10current
diskVolumeGroup
OBJECT-GROUP
This group contains a collection of objects specific to disk volume objects.
1.3.6.1.4.1.4998.1.1.10.1.10.2.11current
fpgaErrorEventGroup
OBJECT-GROUP
This group contains a collection of objects dealing with FPGA errors.
1.3.6.1.4.1.4998.1.1.10.1.10.2.12current