BROCADE-QOS-MIB
- Registered at
- 1.3.6.1.4.1.1991.1.1.14.1
- Last updated
- 2012-07-18 00:00
- Organization
- Brocade Communications Systems, Inc.
- Revisions
- 2012-07-18 00:00
- Namespace
- extreme
- Source file
BROCADE-QOS-MIB- Digest
sha256:37b352c4e37221d996b233f9860c2f6165e66b7fcfcb32f85443a631abb58582
Description
The MIB module contains the managed object definition for Brocade Quality of Service. Supported Platforms: - supported on NetIron XMR/MLX latforms. Copyright 1996-2012 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Contact
Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com
Imports
| From | Symbols |
|---|---|
| FOUNDRY-SN-ROOT-MIB | brcdQos |
| FOUNDRY-SN-SWITCH-GROUP-MIB | PortPriorityTC |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Counter64, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB BROCADE-QOS-MIB FOUNDRY-SN-AGENT-MIB FOUNDRY-SN-ROOT-MIB FOUNDRY-SN-SWITCH-GROUP-MIB HCNUM-TC IANAifType-MIB IF-MIB INET-ADDRESS-MIB P-BRIDGE-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| brcdHqosObjects OBJECT-IDENTITY | 1.3.6.1.4.1.1991.1.1.14.1.1 | |||
| brcdHqosStatsTable OBJECT-TYPE A list of brcHqosStats entries. This table contains information of various HQoS counters. The HQoS is supported on NI-MLX-10Gx8-M/D LP modules. | 1.3.6.1.4.1.1991.1.1.14.1.1.1 | not-accessible | current | |
| brcdHqosStatsEntry OBJECT-TYPE An entry containing Hqos statistics counter information applicable for 10Gx8 interface if the module is physically present. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1 | not-accessible | current | |
| brcdHqosIfIndex OBJECT-TYPE The index of the interface index where the HQoS is configured. The LP module must be physically present and operationally up. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.1 | InterfaceIndex | not-accessible | current |
| brcdHqosEndpointType OBJECT-TYPE This object specifies the End point type for HQoS scheduler. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.2 | INTEGER {other(1), singleTaggedVlan(2), doubleTaggedVlan(3), bVlanIsid(4)} | not-accessible | current |
| brcdHqosEndpointTag OBJECT-TYPE This object specifies the HQoS end point tag. If the brcdHqosEndpointType is other(1), then this object has zero value. If the brcdHqosEndpointType is singleTaggedVlan(2), dougleTaggedVlan(3) or bVlanIsid(4), then this object has VLAN id. The valid VLAN ids are 1 to 4094. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.3 | Unsigned32 | not-accessible | current |
| brcdHqosEndpointInnerTag OBJECT-TYPE This object specifies the HQoS end point inner tag. If the brcdHqosEndpointType is other(1) or singleTaggedVlan(2) then this object has zero value. If the brcdHqosEndpointType is dougleTaggedVlan(3) then this object has VLAN id. The valid VLAN ids are 1 to 4094 If the index brcdHqosEndpointType is bVlanIsid(4), then this object has ISID value. The valid ISID are 256 to 16777214. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.4 | Unsigned32 | not-accessible | current |
| brcdHqosStatsPriority OBJECT-TYPE The priority of the packets that will be stored in this queue. This is 1-based index. The HQoS queue with brcdHqosEndpointType as other(1) have 8 priorities. All other HQoS queues have 4 priorities, two consecutive priorities are stored in one queue. In this case, the valid values for this index are 1, 3, 5 and 7. The queue with priority 1 has the packets with priority 1 and 2. Same applies for priority 3, 5 and 7 | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.5 | PortPriorityTC | not-accessible | current |
| brcdHqosStatsDescription OBJECT-TYPE This object gives the HQoS scheduler node name in full path format with each node separated by dot. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.6 | DisplayString | read-only | current |
| brcdHqosStatsEnquePkts OBJECT-TYPE A count of all packets entering ingress queues on this queue. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.7 | Counter64 | read-only | current |
| brcdHqosStatsEnqueBytes OBJECT-TYPE A count of all bytes entering ingress queues on this queue. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.8 | Counter64 | read-only | current |
| brcdHqosStatsDequePkts OBJECT-TYPE A count of all packets dequeued from ingress queues and forwarded on this queue. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.9 | Counter64 | read-only | current |
| brcdHqosStatsDequeBytes OBJECT-TYPE A count of all bytes dequeued from ingress queues and forwarded on this queue. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.10 | Counter64 | read-only | current |
| brcdHqosStatsTotalDiscardPkts OBJECT-TYPE A count of all packets failing to enter ingress queues on this queue. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.11 | Counter64 | read-only | current |
| brcdHqosStatsTotalDiscardBytes OBJECT-TYPE A count of all bytes failing to enter ingress queues on this queue. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.12 | Counter64 | read-only | current |
| brcdHqosStatsOldestDiscardPkts OBJECT-TYPE A count of all packets entering ingress queues on this queue, but deleted afterwards due to buffer full. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.13 | Counter64 | read-only | current |
| brcdHqosStatsOldestDiscardBytes OBJECT-TYPE A count of all bytes entering ingress queues on this queue, but deleted afterwards due to buffer full | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.14 | Counter64 | read-only | current |
| brcdHqosStatsWREDDroppedPkts OBJECT-TYPE A count of all bytes entering ingress queues on this queue, but deleted afterwards due to buffer full | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.15 | Counter64 | read-only | current |
| brcdHqosStatsWREDDroppedBytes OBJECT-TYPE A count of all bytes entering ingress queues on this queue, but deleted afterwards due to buffer full | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.16 | Counter64 | read-only | current |
| brcdHqosStatsCurrentQDepth OBJECT-TYPE The current queue depth. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.17 | Counter64 | read-only | current |
| brcdHqosStatsMaxQDepthSinceLastRead OBJECT-TYPE The maximum queue depth since last access to read. | 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.18 | Counter64 | read-only | current |