BCS-IDENT-MIB
- Registered at
- 1.3.6.1.4.1.1166
- Last updated
- 2010-08-25 00:00
- Organization
- Motorola Broadband Home Solutions
- Namespace
- arris
- Source file
BCS-IDENT-MIB- Digest
sha256:455c182cf96662d141d717a35c6caf0c8a4bb55544615069d6287d36704fc63a
Description
The SMIv2 MIB module for the MOTOROLA BCS common ident objects. The MIB Tree for this is shown below.
Contact
Motorola Technical Response Center Inside USA 1-888-944-HELP (1-888-944-4357) Outside USA 1-215-323-0044 TRC Hours: Monday through Friday 8am - 7pm Eastern Standard Time Saturdays 10am - 5pm Eastern Standard Time
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
Imported by
2 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BCS-IDENT-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1 | giproducts | DSR4410MD-MIB |
| 1.3.6.1.4.1.1166.7 | bcs |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| EntryStatus type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| giproducts OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1 | |||
| acc4000d OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.1 | |||
| anicd OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.2 | |||
| item1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.4 | |||
| irt1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.5 | |||
| nc1500 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.6 | |||
| om1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.7 | |||
| im1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.8 | |||
| mps OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.9 | |||
| rpd1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.10 | |||
| acpStatus OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.11 | |||
| heartbeat OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.12 | |||
| entitlementKey OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.13 | |||
| arpd OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.14 | |||
| svom OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.15 | |||
| svm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.16 | |||
| erm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.17 | |||
| surfBbnh OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.18 | |||
| sb2100 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.19 | |||
| sb2100D OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.20 | |||
| sb2000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.21 | |||
| saDANIS OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.30 | |||
| apex OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.31 | |||
| rem OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.32 | |||
| mpe OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.33 | |||
| spe OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.34 | |||
| ne2000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.35 | |||
| apex1500 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.36 | |||
| agb OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.37 | |||
| ne2500 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.38 | |||
| hdd2000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.40 | |||
| merlin OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.50 | |||
| rsr OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.60 | |||
| gsrm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.61 | |||
| gom OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.62 | |||
| b3 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.63 | |||
| adm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.64 | |||
| sem OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.70 | |||
| ecmg OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.71 | |||
| bsiAdapter OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.72 | |||
| oles OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.73 | |||
| ne OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.74 | |||
| tmxCommTrap OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.75 | |||
| drmenginekskdc OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.76 | |||
| drmenginerte OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.77 | |||
| drmengineecmg OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.78 | |||
| drmengineskgpkg OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.79 | |||
| tmx OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.80 | |||
| prs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.81 | |||
| se2000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.82 | |||
| dem OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.83 | |||
| ncs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.84 | |||
| ucs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.85 | |||
| lmm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.86 | |||
| se4000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.87 | |||
| rc OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.88 | |||
| netSentry OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.99 | |||
| sdm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.100 | |||
| hfcEms OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.101 | |||
| bnc OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.102 | |||
| drmenginecm OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.103 | |||
| stdc OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.104 | |||
| tview OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.105 | |||
| ponOa OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.150 | |||
| mwtea200 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.151 | |||
| bti OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.200 | |||
| rfModMIB OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.201 | |||
| btiIntMIB OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.202 | |||
| sg4000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.203 | |||
| ponEm870 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.210 | |||
| rpa OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.250 | |||
| rpc OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.251 | |||
| dct5000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.300 | |||
| dct5100 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.301 | |||
| dct5200 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.302 | |||
| edfaMIB OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.311 | |||
| corvusMIB OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.312 | |||
| oa600 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.313 | |||
| dsr350f OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.321 | |||
| cableCard OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.350 | |||
| radd6000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.400 | |||
| cs1000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.401 | |||
| kls OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.402 | |||
| dac6000 OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.403 | |||
| sdi OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.404 | |||
| cpms OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.405 | |||
| ap OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.406 | |||
| ps OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.407 | |||
| motoIPNSprodID OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.450 | |||
| ird4500x OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.610 | |||
| ird4520x OBJECT-IDENTITY | 1.3.6.1.4.1.1166.1.620 | |||
| giproxies OBJECT-IDENTITY | 1.3.6.1.4.1.1166.3 | |||
| gicommon OBJECT-IDENTITY | 1.3.6.1.4.1.1166.4 | |||
| identity OBJECT-IDENTITY | 1.3.6.1.4.1.1166.4.1 | |||
| state OBJECT-IDENTITY | 1.3.6.1.4.1.1166.4.2 | |||
| traps OBJECT-IDENTITY | 1.3.6.1.4.1.1166.4.3 | |||
| logs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.4.4 | |||
| motproxies OBJECT-IDENTITY | 1.3.6.1.4.1.1166.6 | |||
| bcs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7 | |||
| bcsIdent OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.1 | |||
| identSerialNumber OBJECT-TYPE This contains the serial number of the unit. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non- volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number. | 1.3.6.1.4.1.1166.7.1.1 | DisplayString | read-only | current |
| identChassisNumber OBJECT-TYPE This contains the chassis number of the unit. This is applicable only to a limited number of products, currently, only the ITEM-1000. For products for which this is not applicable, this will be a null object. There is no specification of the internal format of the chassis number. The means by which any product determines its chassis number is to be determined by each individual product. | 1.3.6.1.4.1.1166.7.1.2 | DisplayString | read-only | current |
| identIfIndex OBJECT-TYPE This contains the IfIndex of the OAM&P port. | 1.3.6.1.4.1.1166.7.1.3 | INTEGER (1..2147483647) | read-only | current |
| identHardwareVersion OBJECT-TYPE This contains a display string that defines the hardware version of this particular unit. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture. | 1.3.6.1.4.1.1166.7.1.4 | DisplayString | read-only | current |
| identHardwareFeatures OBJECT-TYPE This contains a display string that defines the features of this particular unit. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture. | 1.3.6.1.4.1.1166.7.1.5 | DisplayString | read-only | current |
| identInventoryCode OBJECT-TYPE This contains a display string that defines the inventory code for this unit. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code. | 1.3.6.1.4.1.1166.7.1.6 | DisplayString | read-write | current |
| identSoftwareVersion OBJECT-TYPE This contains a display string that defines the current version of the software for this unit. The format of the software version is a fully qualified directory name. This value is received by a unit as within a BOOTP response from the BOOTP server. It is available to the network manager for applications that track the installed software. Once the software version has been set, it should be kept in non-volatile memory. | 1.3.6.1.4.1.1166.7.1.7 | DisplayString | read-only | current |
| identLocationArea OBJECT-TYPE This is different from the MIB II sysLocation variable as it contains only the location area and does not describe the precise location. This contains a display string that defines the area in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory. | 1.3.6.1.4.1.1166.7.1.8 | DisplayString | read-write | current |
| identLocationRack OBJECT-TYPE This contains a display string that defines the rack in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory. | 1.3.6.1.4.1.1166.7.1.9 | DisplayString | read-write | current |
| identLocationShelf OBJECT-TYPE This contains a display string that defines the shelf in which the unit is installed. Location is defined by a set of three objects: 'Area', 'Rack', and 'Shelf'. These location objects cannot be determined by the unit itself, but can only be determined by the network manager. It is available to the unit for display on a front panel. Display of the location on the front panel is useful in validating the configuration established by the network manager. The unit should only allow this object to be set when it is in the 'configuration' mode. Once the Location Area has been set, it should be kept in non-volatile memory. | 1.3.6.1.4.1.1166.7.1.10 | DisplayString | read-write | current |
| identMIBVersion OBJECT-TYPE The version number of this MIB. | 1.3.6.1.4.1.1166.7.1.11 | DisplayString | read-only | current |
| identAgentVersion OBJECT-TYPE The version number of the Agent. | 1.3.6.1.4.1.1166.7.1.12 | DisplayString | read-only | current |
| identCommand OBJECT-TYPE This is the command to be executed by the resource managed by the agent. The value unspecified is always returned on SNMP Get/GetNext while the resource is running. If the restart(1) command is given, currentlyRestarting(2) is returned while the resource is preparing to restart (reboot). | 1.3.6.1.4.1.1166.7.1.13 | INTEGER {restart(1), currentlyRestarting(2), unspecified(3), purgeAndRestart(4), currentlyPurgingAndRestarting(5), purgeNvramAndRestart(6), currentlyPurgingNvramAndRestarting(7)} | read-write | current |
| identIfExtensionTable OBJECT-TYPE This table contains extensions to the MIB II ifTable which contains the definitions of all interfaces. An ifTable entry may be a board or just a port on a board. Any ifTable entry can have an extension in the identIfExtensionTable. The corrsponding entry in that table will have the identIfIndex = ifIndex. Within the ifTable the presence of such an entry is indicated by setting the variable ifSpecific to the OBJECT IDENTIFIER value of identIfExtensionTable. Otherwise iFSpecific is set to {0 0}. The ifType - other - is used for all board types not envisoned by MIB II. | 1.3.6.1.4.1.1166.7.1.14 | not-accessible | current | |
| identIfExtensionEntry OBJECT-TYPE An entry (conceptual row) in the Board Table. | 1.3.6.1.4.1.1166.7.1.14.1 | not-accessible | current | |
| identIfExtensionIndex OBJECT-TYPE Same value as ifIndex of MIB II for the same board. | 1.3.6.1.4.1.1166.7.1.14.1.1 | INTEGER (1..2147483647) | read-only | current |
| identIfSerialNumber OBJECT-TYPE This contains the serial number of the board. There is no specification of the internal format of the serial number. The serial number is entered into either permanent or non-volatile memory of the unit at the time of manufacture. Note - the unit itself supplies the serial number. | 1.3.6.1.4.1.1166.7.1.14.1.2 | DisplayString | read-only | current |
| identIfHardwareVersion OBJECT-TYPE This contains a display string that defines the version of this particular board. There is no specification of the internal format of the hardware version. The hardware version is entered into the either permanent or non-volatile memory of the unit at the time of manufacture. | 1.3.6.1.4.1.1166.7.1.14.1.3 | DisplayString | read-only | current |
| identIfHardwareFeatures OBJECT-TYPE This contains a display string that defines the features of this particular board. There is no specification of the internal format of the hardware features. The hardware features is entered into the either permanent or non-volatile memory of the unit at the time of manufacture. | 1.3.6.1.4.1.1166.7.1.14.1.4 | DisplayString | read-only | current |
| identIfInventoryCode OBJECT-TYPE This contains a display string that defines the inventory code for this board. This is an optional value; if there is no inventory code, The unit will respond with a null string. Once an inventory code has been set, it should be kept in non-volatile memory. The unit should only allow this object to be set when it is in the 'configuration' mode. There is no specification of the internal format of the inventory Code. | 1.3.6.1.4.1.1166.7.1.14.1.5 | DisplayString | read-write | current |
| identIfFirmwareVersion1 OBJECT-TYPE Within a product, there may be several identifiers of such firmware, boot proms, kernel versions, flash versions, etc. This field (and the 3 that follow) are used to hold the identification of these items. These values must be entered into the board at the time of manufacturing. Unused fields are reported as null values. These fields are available to the network manager for applications that keep track of the firmware related identification. There is no specification of the internal format of firmware version identifiers. | 1.3.6.1.4.1.1166.7.1.14.1.6 | DisplayString | read-only | current |
| identIfFirmwareVersion2 OBJECT-TYPE Firmware related identification field # 2. | 1.3.6.1.4.1.1166.7.1.14.1.7 | DisplayString | read-only | current |
| identIfFirmwareVersion3 OBJECT-TYPE Firmware related identification field # 3. | 1.3.6.1.4.1.1166.7.1.14.1.8 | DisplayString | read-only | current |
| identIfFirmwareVersion4 OBJECT-TYPE Firmware related identification field # 4 | 1.3.6.1.4.1.1166.7.1.14.1.9 | DisplayString | read-only | current |
| identIfSlotId OBJECT-TYPE This variable identifies the board slot. | 1.3.6.1.4.1.1166.7.1.14.1.10 | INTEGER (1..2147483647) | read-write | current |
| identIfCommand OBJECT-TYPE This is the command to be executed by the resource managed by the agent. The value unspecified(10 is always returned on SNMP Get/GetNext while the other values are set by the manager and executed by the resource. | 1.3.6.1.4.1.1166.7.1.14.1.11 | INTEGER {unspecified(1), reset(2), restart(3), halt(4)} | read-write | current |
| identIfAdministrativeState OBJECT-TYPE The current Adminsitrative state of the interface as defined in ISO/IEC 10164-2. | 1.3.6.1.4.1.1166.7.1.14.1.12 | INTEGER {locked(1), unlocked(2), shuttingDown(3)} | read-write | current |
| identIfOperationalState OBJECT-TYPE The current Operational state of the interface as defined in ISO/IEC 10164-2 | 1.3.6.1.4.1.1166.7.1.14.1.13 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| identIfAlarmStatus OBJECT-TYPE This object defines the Alarm status of the interface as defined in ISO/IEC 10164-2 and state-machine | 1.3.6.1.4.1.1166.7.1.14.1.14 | INTEGER {underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), idle(6)} | read-write | current |
| identIfAvailabilityStatus OBJECT-TYPE This object controls the Availability status of the interface as defined in ISO/IEC 10164-2 and state-machine | 1.3.6.1.4.1.1166.7.1.14.1.15 | INTEGER {inTest(1), failed(2), powerOff(3), offLine(4), offDuty(5), dependency(6), degraded(7), notInstalled(8), logFull(9), available(10)} | read-only | current |
| identIfSpecific OBJECT-TYPE The object identifier of a board type specific extension to the ifTable if necessary. Otherwise, identIfSpecific is set to {0 0}. | 1.3.6.1.4.1.1166.7.1.14.1.16 | OBJECT IDENTIFIER | read-only | current |
| identIfEntryStatus OBJECT-TYPE This object is used to create, delete or modify a row in this table. To create a a new network element, this object is initially set to 'createRequest'. After completion of the configuration of the new entry, the manager must set the appropriate instance of this object to the value valid(1) or aborts, setting this object to invalid(4). This object must not be set to 'active' unless the following columnar objects exist in this row: identIfExtensionIndex identIfSerialNumber identIfHardwareVersion identIfInventoryCode identIfFirmwareVersion1 identIfSpecific To delete an existing entry in this table, the manager must set the appropriate instance of this object to the value invalid(4). Creation of an instance of this object has the effect of creating the supplemental object instances to complete the conceptual row. An existing instance of this entry cannot be created. If circumstances occur which cause an entry to become invalid, the agent modifies the value of the appropriate instance of this object to invalid(4). Whenever, the value of this object for a particular entry becomes invalid(4), the conceptual row for that instance may be removed from the table at any time, either immediately or subsequently. | 1.3.6.1.4.1.1166.7.1.14.1.17 | EntryStatus | read-write | current |
| identUnitModel OBJECT-TYPE This contains the model of the product. For example, the ITEM-1000 would contain 'ITEM1000'. | 1.3.6.1.4.1.1166.7.1.15 | DisplayString | read-only | current |
| bcsLogs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.4 | |||
| bcsSimulcryptScs OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.7 | |||
| bcsSimulcryptMux OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.8 | |||
| bcsSimulcrypt OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.9 | |||
| bcsDatabase OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.11 | |||
| bcsRedundancy OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.12 | |||
| bcsMsgGeneration OBJECT-IDENTITY | 1.3.6.1.4.1.1166.7.21 | |||
| mea OBJECT-IDENTITY | 1.3.6.1.4.1.1166.8 | |||
| addressablecontrol OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9 | |||
| acCommon OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9.1 | |||
| acSecurity OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9.2 | |||
| acServices OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9.3 | |||
| acBsi OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9.4 | |||
| acOperations OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9.5 | |||
| acTopology OBJECT-IDENTITY | 1.3.6.1.4.1.1166.9.6 | |||
| chsInternal OBJECT-IDENTITY | 1.3.6.1.4.1.1166.10 | |||
| emLogin OBJECT-IDENTITY | 1.3.6.1.4.1.1166.10.1 | |||
| radiusClient OBJECT-IDENTITY | 1.3.6.1.4.1.1166.10.2 |