MIBs Depot

DSR4410MD-MIB

Registered at
1.3.6.1.4.1.1166.1
Last updated
2014-04-23 10:00
Organization
ARRIS Group INC
Revisions
2014-04-23 10:00, 2011-08-10 10:00, 2011-02-04 10:00, 2011-02-02 10:00, 2011-01-07 10:00, 2010-12-09 10:00, 2010-12-08 10:00, 2010-11-29 10:00, 2010-06-22 10:00
Namespace
arris
Source file
DSR4410MD-MIB
Digest
sha256:437210d3b2d7d1785822e1bf3820bd62106472da11bfba1fd553c6652399b982

Description

The managed objects for the dsr mib.

Contact

ARRIS Technical Response Center Inside USA 1-888-944-HELP (1-888-044-4357) Outside USA 1-215-323-0044 TRC Hours: Monday through Friday 8am - 7pm Eastern Standard Time Saturdays 10am - 5pm Eastern Standard Time

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DSR4410MD-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.1166.1.31apexAPEX-MIB

Objects

NameOIDSyntaxAccessStatus
org
OBJECT-IDENTITY
1.3
dod
OBJECT-IDENTITY
1.3.6
internet
OBJECT-IDENTITY
1.3.6.1
private
OBJECT-IDENTITY
1.3.6.1.4
enterprises
OBJECT-IDENTITY
1.3.6.1.4.1
giMIB
OBJECT-IDENTITY
1.3.6.1.4.1.1166
giproducts
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1
videoMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.1
videoOutput525Lines
OBJECT-TYPE
The format of the output video that the unit renders when the unit is tuned to a 525 line video broadcast signal.
1.3.6.1.4.1.1166.1.621.1.1INTEGER {ntsc(0), palm(1)}read-writecurrent
videoOutput625Lines
OBJECT-TYPE
The format of the output video that the unit renders when the unit is tuned to a 625 line video broadcast signal.
1.3.6.1.4.1.1166.1.621.1.2INTEGER {pal-d-g-b(0), pali(1), paln(2)}read-writecurrent
aspectRatioInput
OBJECT-TYPE
The aspect ratio of the video that is carried in the broadcast signal.
1.3.6.1.4.1.1166.1.621.1.3INTEGER {ar4x3(0), ar16x9(1), unknown(2)}read-onlycurrent
aspectRatioOutput
OBJECT-TYPE
The aspect ratio of the output video signal.
1.3.6.1.4.1.1166.1.621.1.4INTEGER {ar4x3-Zoom(0), ar4x3-PanScan(1), ar4x3-LetterBox(2)}read-writecurrent
rfPortsMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.2
rfPortsSetup
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.2.1
port1
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.2.1.1
port1SetupMode
OBJECT-TYPE
When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polarity will be automatically set during the first channel change.
1.3.6.1.4.1.1166.1.621.2.1.1.1INTEGER {manual(0), auto(1)}read-writecurrent
port1Satellite
OBJECT-TYPE
A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated.
1.3.6.1.4.1.1166.1.621.2.1.1.2OCTET STRING (SIZE(2..3))read-writecurrent
port1Polarity
OBJECT-TYPE
The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink.
1.3.6.1.4.1.1166.1.621.2.1.1.3INTEGER {horizontal(0), vertical(1), notDefined(2)}read-writecurrent
port2
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.2.1.2
port2SetupMode
OBJECT-TYPE
When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polarity will be automatically set during the first channel change.
1.3.6.1.4.1.1166.1.621.2.1.2.1INTEGER {manual(0), auto(1)}read-writecurrent
port2Satellite
OBJECT-TYPE
A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated.
1.3.6.1.4.1.1166.1.621.2.1.2.2OCTET STRING (SIZE(2..3))read-writecurrent
port2Polarity
OBJECT-TYPE
The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink.
1.3.6.1.4.1.1166.1.621.2.1.2.3INTEGER {horizontal(0), vertical(1), notDefined(2)}read-writecurrent
manualTune
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.2.2
activePort
OBJECT-TYPE
The RF port that is active during a manual tune.
1.3.6.1.4.1.1166.1.621.2.2.1INTEGER {port1(0), port2(1), asiInput(8)}read-writecurrent
mode
OBJECT-TYPE
The frequency plan of the satellite to which the unit tunes during installation. The unit accepts a C-Band satellite transponder number when the selection is xpndr. The unit accepts a discrete frequency value when the selection is lfreq
1.3.6.1.4.1.1166.1.621.2.2.2INTEGER {xpndr(0), lfreq(1)}read-writecurrent
transponderNumber
OBJECT-TYPE
The transponder number to which the unit tunes during installation This in turn specifies the L-Band frequency to which the unit tunes during installation. This value is valid only when the FrequencyPlan selection is xpndr. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.3INTEGER (1..24)read-writecurrent
frequency
OBJECT-TYPE
The L-band frequency, in MHz, during a manual tune. A new manual tune is initiated when this object is set.This value is valid only of the Frequency Plan selection is lfreq. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.4INTEGER (950..2150)read-writecurrent
dvbSymbolRate
OBJECT-TYPE
The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.5INTEGER (0..99999999)read-writecurrent
dvbCodeRate
OBJECT-TYPE
The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.6INTEGER {cr1-2(0), cr2-3(1), cr3-4(2), cr5-6(3), cr7-8(4)}read-writecurrent
symbolCodeBit
OBJECT-TYPE
The symbol, code rate, and bitstream select combination during a manual tune. A new manual tune is initiated when this object is set. The symbol rate takes eight possible values: 29.3, 19.5, 14.6, 11.7, 9.76, 7.32, 4.88, and 3.25 Msps. The code rate also takes eight possible values: 7/8, 5/6, 4/5, 3/4, 2/3, 3/5, 1/2, and 5/11. The bitstream select takes two possible values: combined and split. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.8INTEGER {sr29Cm5-11Combined(0), sr29Cm1-2Combined(1), sr29Cm3-5Combined(2), sr29Cm2-3Combined(3), sr29Cm3-4Combined(4), sr29Cm4-5Combined(5), sr29Cm5-6Combined(6), sr29Cm7-8Combined(7), sr29Cm5-11Split(8), sr29Cm1-2Split(9), sr29Cm3-5Split(10), sr29Cm2-3Split(11), sr29Cm3-4Split(12), sr29Cm4-5Split(13), sr29Cm5-6Split(14), sr29Cm7-8Split(15), sr19Cm5-11Combined(16), sr19Cm1-2Combined(17), sr19Cm3-5Combined(18), sr19Cm2-3Combined(19), sr19Cm3-4Combined(20), sr19Cm4-5Combined(21), sr19Cm5-6Combined(22), sr19Cm7-8Combined(23), sr19Cm5-11Split(24), sr19Cm1-2Split(25), sr19Cm3-5Split(26), sr19Cm2-3Split(27), sr19Cm3-4Split(28), sr19Cm4-5Split(29), sr19Cm5-6Split(30), sr19Cm7-8Split(31), sr14Cm1-2Combined(32), sr14Cm3-5Combined(33), sr14Cm2-3Combined(34), sr14Cm3-4Combined(35), sr14Cm4-5Combined(36), sr14Cm5-6Combined(37), sr14Cm7-8Combined(38), sr11Cm1-2Combined(39), sr11Cm3-5Combined(40), sr11Cm2-3Combined(41), sr11Cm3-4Combined(42), sr11Cm4-5Combined(43), sr11Cm5-6Combined(44), sr11Cm7-8Combined(45), sr9Cm1-2Combined(46), sr9Cm3-5Combined(47), sr9Cm2-3Combined(48), sr9Cm3-4Combined(49), sr9Cm4-5Combined(50), sr9Cm5-6Combined(51), sr9Cm7-8Combined(52), sr7Cm1-2Combined(53), sr7Cm3-5Combined(54), sr7Cm2-3Combined(55), sr7Cm3-4Combined(56), sr7Cm4-5Combined(57), sr7Cm5-6Combined(58), sr7Cm7-8Combined(59), sr4Cm1-2Combined(60), sr4Cm3-5Combined(61), sr4Cm2-3Combined(62), sr4Cm3-4Combined(63), sr4Cm4-5Combined(64), sr4Cm5-6Combined(65), sr4Cm7-8Combined(66), sr3Cm1-2Combined(67), sr3Cm3-5Combined(68), sr3Cm2-3Combined(69), sr3Cm3-4Combined(70), sr3Cm4-5Combined(71), sr3Cm5-6Combined(72), sr3Cm7-8Combined(73)}read-writecurrent
modulationMode
OBJECT-TYPE
The modulation mode to be used for the manual tune. A new manual tune is initiated when this object is set.
1.3.6.1.4.1.1166.1.621.2.2.9INTEGER {dciiManual(0), dvbManual(1), dciiAuto(2), manual8pskTC(3), manual8pskDvbS2(4)}read-writecurrent
psk8SymbolRate
OBJECT-TYPE
The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.10INTEGER (1000000..30000000)read-writecurrent
psk8CodeRate
OBJECT-TYPE
The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.11INTEGER {cr2-3-192(0), cr3-4-205(1), cr3-4-211(2), cr3-4-219(3), cr5-6-230(4), cr8-9-240(5)}read-writecurrent
dvbS2symbolRate
OBJECT-TYPE
The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.12INTEGER (1000000..33000000)read-writecurrent
dvbS2codeRate
OBJECT-TYPE
The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
1.3.6.1.4.1.1166.1.621.2.2.13INTEGER {cr3-5(0), cr2-3(1), cr3-4(2), cr5-6(3), cr8-9(4), cr9-10(5)}read-writecurrent
channelMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.3
channelSelect
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.3.1
vctID
OBJECT-TYPE
The virtual channel table number.
1.3.6.1.4.1.1166.1.621.3.1.1INTEGER (0..65535)read-writecurrent
channelNumber
OBJECT-TYPE
The virtual channel.
1.3.6.1.4.1.1166.1.621.3.1.2INTEGER (0..4095)read-writecurrent
channelStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.3.2
transponder
OBJECT-TYPE
The current transponder name (alpha/numeric) as received from the uplink.A Blank string is returned if the name is not available .
1.3.6.1.4.1.1166.1.621.3.2.1OCTET STRING (SIZE(0..31))read-onlycurrent
source
OBJECT-TYPE
The name of the current source signal as received from the uplink.A Blank string is returned if the name is not available .
1.3.6.1.4.1.1166.1.621.3.2.2OCTET STRING (SIZE(0..255))read-onlycurrent
satelliteStatus
OBJECT-TYPE
The name of the current satellite as received from the uplink. A Blank string is returned if the name is not available .
1.3.6.1.4.1.1166.1.621.3.2.3OCTET STRING (SIZE(0..15))read-onlycurrent
serviceSelectionMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.4
mpegServiceNumber
OBJECT-TYPE
The MPEG service number which the IRD has to play.
1.3.6.1.4.1.1166.1.621.4.1INTEGER (0..65535)read-writecurrent
unitControlMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.5
unitControl
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.5.1
contrast
OBJECT-TYPE
The LCD contrast, with 0 representing the least contrast and 30 representing the most.
1.3.6.1.4.1.1166.1.621.5.1.1INTEGER (0..30)read-writecurrent
asiEnable
OBJECT-TYPE
Option to enable or disbale the ASI output. Note that lock-off is a read only value used by the uplink to lock asiEnable. It cannot be set via SNMP. Also, when this value is lock-off, this entire field is read only.
1.3.6.1.4.1.1166.1.621.5.1.3INTEGER {on(0), off(1), lock-off(2)}read-writecurrent
lnbPower
OBJECT-TYPE
Option to enable or disable LNB Power.
1.3.6.1.4.1.1166.1.621.5.1.6INTEGER {on(0), off(1)}read-writecurrent
resetIRD
OBJECT-TYPE
Option to reboot the box.
1.3.6.1.4.1.1166.1.621.5.1.7INTEGER {no(0), powercycle(1)}read-writecurrent
formatRate
OBJECT-TYPE
Format and rate of the ASI output
1.3.6.1.4.1.1166.1.621.5.1.8INTEGER {byte54(0), packet54(1), packet81(2), packet160(3), byte27(4), packet27(5)}read-writecurrent
audioMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6
audioConfig
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6.1
audio1Config
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6.1.1
audio1GainControl
OBJECT-TYPE
In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left.
1.3.6.1.4.1.1166.1.621.6.1.1.1INTEGER {joint(1)}read-onlycurrent
audio1LeftGain
OBJECT-TYPE
The left audio signal output level from -20 dB to 0 dB, in 1 dB increments.
1.3.6.1.4.1.1166.1.621.6.1.1.2INTEGER (-20..0)read-writecurrent
audio1RightGain
OBJECT-TYPE
The right audio signal output level from -20 dB to 0 dB, in 1 dB increments.
1.3.6.1.4.1.1166.1.621.6.1.1.3INTEGER (-20..0)read-onlycurrent
audio1DiagNorm
OBJECT-TYPE
This varaiables enables and diables the audio dialog normalization
1.3.6.1.4.1.1166.1.621.6.1.1.4INTEGER {off(0), on(1)}read-writecurrent
audio1DownMix
OBJECT-TYPE
The mode of the audio output. The unit downmixes the input audio to the selected channel mode.
1.3.6.1.4.1.1166.1.621.6.1.1.5INTEGER {mono(0), dualMono(1), stereo(2), surround(3)}read-writecurrent
audio1Compression
OBJECT-TYPE
The degree of audio level compression.
1.3.6.1.4.1.1166.1.621.6.1.1.6INTEGER {off(0), moderate(1), heavy(2)}read-writecurrent
audio2Config
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6.1.2
audio2GainControl
OBJECT-TYPE
In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left.
1.3.6.1.4.1.1166.1.621.6.1.2.1INTEGER {joint(1)}read-onlycurrent
audio2LeftGain
OBJECT-TYPE
The left audio signal output level from -20 dB to 0 dB, in 1 dB increments.
1.3.6.1.4.1.1166.1.621.6.1.2.2INTEGER (-20..0)read-writecurrent
audio2RightGain
OBJECT-TYPE
The right audio signal output level from -20 dB to 0 dB, in 1 dB increments.
1.3.6.1.4.1.1166.1.621.6.1.2.3INTEGER (-20..0)read-onlycurrent
audio2DiagNorm
OBJECT-TYPE
This varaiables enables and diables the audio dialog normalization
1.3.6.1.4.1.1166.1.621.6.1.2.4INTEGER {off(0), on(1)}read-writecurrent
audio2DownMix
OBJECT-TYPE
The mode of the audio output. The unit downmixes the input audio to the selected channel mode .
1.3.6.1.4.1.1166.1.621.6.1.2.5INTEGER {mono(0), dualMono(1), stereo(2), surround(3)}read-writecurrent
audio2Compression
OBJECT-TYPE
The degree of audio level compression.
1.3.6.1.4.1.1166.1.621.6.1.2.6INTEGER {off(0), moderate(1), heavy(2)}read-writecurrent
audioOutput
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6.2
audio1Output
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6.2.1
audio1LeftLanguage
OBJECT-TYPE
The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order of the 3-letter language in the service, e.g., eng01 denotes the second English component that is carried in the active service. The unit processes the default language when the preferred language setting is def (In this case the string is only 3 character wide). Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.1.1OCTET STRING (SIZE(3 | 5))read-writecurrent
audio1RightLanguage
OBJECT-TYPE
The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio1LeftLanguage and any changes to this value does not have any effect. This is a 3(def) or 5(e.g., eng01) character string similar to the left language string. Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.1.2OCTET STRING (SIZE(3 | 5))read-writecurrent
audio1LeftLanguageStatus
OBJECT-TYPE
The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1LeftLanguage.
1.3.6.1.4.1.1166.1.621.6.2.1.3OCTET STRING (SIZE(3 | 5))read-onlycurrent
audio1RightLanguageStatus
OBJECT-TYPE
The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.1.4OCTET STRING (SIZE(3 | 5))read-onlycurrent
audio2Output
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.6.2.2
audio2LeftLanguage
OBJECT-TYPE
The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order of the 3-letter language in the service, e.g., eng01 denotes the second English component that is carried in the active service. The unit processes the default language when the preferred language setting is def(in this case. string is 3 letters wide). Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.2.1OCTET STRING (SIZE(3 | 5))read-writecurrent
audio2RightLanguage
OBJECT-TYPE
The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio2LeftLanguage and any changes to this value does not have any effect. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.2.2OCTET STRING (SIZE(3 | 5))read-writecurrent
audio2LeftLanguageStatus
OBJECT-TYPE
The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.2.3OCTET STRING (SIZE(3 | 5))read-onlycurrent
audio2RightLanguageStatus
OBJECT-TYPE
The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied
1.3.6.1.4.1.1166.1.621.6.2.2.4OCTET STRING (SIZE(3 | 5))read-onlycurrent
dataMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.7
dataStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.7.1
ethernetIP
OBJECT-TYPE
Retrieves whether the select channel contains IP data, as defined in the downloaded network data from the uplink.
1.3.6.1.4.1.1166.1.621.7.1.1INTEGER {defined(0), notDefined(1), unknown(2)}read-onlycurrent
textSetup
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.7.2
subtitleLanguage
OBJECT-TYPE
The selected subtitle track. Applicable when the selected channel carries multiple subtitle tracks. The 5-character string has the following representation: sssdd where sss = 3-char ISO 639 code for the subtitle language dd = 2-digits indicating the occurrence of the specified language 'ENG02' would select, for example, the subtitle track for the second occurrence of English subtitles. To turn the subtitle off, enter 'Off01' or 'Off00' at the browser. The user must enter the ordinal.
1.3.6.1.4.1.1166.1.621.7.2.1OCTET STRING (SIZE(1..5))read-writecurrent
subtitleLanguageStatus
OBJECT-TYPE
The subtitle language currently being presented by the IRD
1.3.6.1.4.1.1166.1.621.7.2.2OCTET STRING (SIZE(1..5))read-onlycurrent
subtitleDisplay
OBJECT-TYPE
The subtitle language currently being presented by the IRD
1.3.6.1.4.1.1166.1.621.7.2.3INTEGER {all(0), avail(1), status(2), off(3)}read-writecurrent
ethernet10_100
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.7.3
ipAddress
OBJECT-TYPE
The IP address of the snmp port 1, in the common dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.3.1IpAddressread-onlycurrent
subnetMask
OBJECT-TYPE
The subnet mask of the snmp port 1, in the dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.3.2IpAddressread-onlycurrent
defaultGateway
OBJECT-TYPE
The IP address of the gateway that is used by the snmp port 1, in the dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.3.3IpAddressread-onlycurrent
macAddr
OBJECT-TYPE
The ethernet 1 MAC address in hh:hh:hh:hh:hh:hh format.
1.3.6.1.4.1.1166.1.621.7.3.4OCTET STRING (SIZE(17))read-onlycurrent
ethernetGigE
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.7.4
gigEipAddress
OBJECT-TYPE
The IP address of the gigE port, in the common dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.4.1IpAddressread-writecurrent
gigEsubnetMask
OBJECT-TYPE
The subnet mask of the gigE port, in the dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.4.2IpAddressread-writecurrent
gigEgateway
OBJECT-TYPE
The IP address of the gateway that is used by the gigE port, in the dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.4.3IpAddressread-writecurrent
gigEmacAddr
OBJECT-TYPE
The gigEthernet MAC address in hh:hh:hh:hh:hh:hh format.
1.3.6.1.4.1.1166.1.621.7.4.4OCTET STRING (SIZE(17))read-onlycurrent
gigEmode
OBJECT-TYPE
The gigEthernet mode is one of the following values MPTS,disabled,TS-DSMCC or DSM-CC.
1.3.6.1.4.1.1166.1.621.7.4.5INTEGER {mpts(0), disabled(1), tsdsmcc(2), dsmcc(3)}read-writecurrent
mptsIpAddr
OBJECT-TYPE
The MPTS IP address of the gigE port in the dotted-decimal format.
1.3.6.1.4.1.1166.1.621.7.4.6IpAddressread-writecurrent
mptsPort
OBJECT-TYPE
The port associated with the MPTS IP address.
1.3.6.1.4.1.1166.1.621.7.4.7INTEGER (0..65535)read-writecurrent
extHardwareMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.8
alarms
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.8.1
alarmTrigger
OBJECT-TYPE
The trigger condition for which the alarm is activated. When the alarm is activated the Alarm LED illuminates and the alrm relay indicates an alarm condition. The alarm is activated for any of the following conditions 1. The tuner loses lock when the input is RF 2. The unit is not authorized to access the selected service 3. The unit loses video When Auto is selected the alarm activates for any of these conditions and when Disabled is selected the alarm does not activate for any condition.
1.3.6.1.4.1.1166.1.621.8.1.2INTEGER {noSignal(0), noVideoPresent(1), noAuthorization(2), auto(3), disabled(4)}read-writecurrent
alarmTest
OBJECT-TYPE
A manual test of the alarm indicators. Setting ON places the unit in the alarm condition.
1.3.6.1.4.1.1166.1.621.8.1.3INTEGER {on(0), off(1)}read-writecurrent
statusMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.9
accessControl
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.9.1
unitAddress
OBJECT-TYPE
The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit.
1.3.6.1.4.1.1166.1.621.9.1.1OCTET STRING (SIZE(19))read-onlycurrent
tvPasscard
OBJECT-TYPE
The electronic address of the TV Pass Card, if present, in the unit address format. When no TV Pass Card is present the value returned is 'Not inserted'.
1.3.6.1.4.1.1166.1.621.9.1.2OCTET STRING (SIZE(26))read-onlycurrent
firmware
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.9.2
bootVersion
OBJECT-TYPE
The version of the boot code.
1.3.6.1.4.1.1166.1.621.9.2.1OCTET STRING (SIZE(6))read-onlycurrent
fpgaVersion
OBJECT-TYPE
The version of the fpga.
1.3.6.1.4.1.1166.1.621.9.2.2OCTET STRING (SIZE(6))read-onlycurrent
firmwareVersion
OBJECT-TYPE
The version of firmware code.
1.3.6.1.4.1.1166.1.621.9.2.3OCTET STRING (SIZE(6))read-onlycurrent
upgradeFirmwareVersion
OBJECT-TYPE
The upgrade version of firmware code.
1.3.6.1.4.1.1166.1.621.9.2.4OCTET STRING (SIZE(6))read-onlycurrent
diagnosticMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.10
screenDisplay
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.10.1
diagnosticScreen
OBJECT-TYPE
The diagnostic screen that is to be presented by the unit on the video output.
1.3.6.1.4.1.1166.1.621.10.1.1INTEGER {off(0), fastFacts1(1), fastFacts2(2), fastFacts3(3), fastFacts4(4), fastFacts5(5), diagA(6), diagB(7), diagBMD(8), diagC(9), diagD(10), diagE(11)}read-writecurrent
clearCounters
OBJECT-TYPE
Clears the counters in the on-screen diagnostics to zero.
1.3.6.1.4.1.1166.1.621.10.1.2INTEGER {yes(0), no(1)}read-writecurrent
testSignals
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.10.2
videoTestPattern
OBJECT-TYPE
The full-field video test pattern that is presented by the unit on the video output.
1.3.6.1.4.1.1166.1.621.10.2.1INTEGER {off(0), colorBar525(1), ire100Ramp(2), ntsc7Combination(3), redField(4), ntsc7Composite(5), fiveStepStair(6), unModulatedYRamp(7)}read-writecurrent
audio1TestPattern
OBJECT-TYPE
The audio test signal that is outputted by the unit for audio 1. The following options are available: o 1000 Hz @ +16 dBm (for mono) o 4040, 3960 Hz @ + 4dBm each (for left and right) o OFF
1.3.6.1.4.1.1166.1.621.10.2.2INTEGER {testToneA-1000(0), testToneB-4040-3960(1), off(2)}read-writecurrent
audio2TestPattern
OBJECT-TYPE
See the DESCRIPTION for the audio1TestPattern object.
1.3.6.1.4.1.1166.1.621.10.2.3INTEGER {testToneA-1000(0), testToneB-4040-3960(1), off(2)}read-writecurrent
cueToneSignal
OBJECT-TYPE
The cue tone test signal.The unit generates a cue test tone sequence consisting of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, A, B, C, D. The unit repeats the cue test tone sequence when enabled. The unit generates a cue tone test tone sequence with a 50 msec tone and inter-tone duration, a 2 second interval between sequences, and immediate activation. When the users set it to On via SNMP. Cuetones are played continuously.
1.3.6.1.4.1.1166.1.621.10.2.4INTEGER {off(0), on(1)}read-writecurrent
vits
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.10.3
waveform
OBJECT-TYPE
The VITS test pattern that is presented by the unit on the the video output.
1.3.6.1.4.1.1166.1.621.10.3.1INTEGER {transmitted(0), disabled(1), colorBar525(2), ire100Ramp(3), ntsc7Combination(4), redField(5), ntsc7Composite(6), fiveStepStair(7), unModulatedYRamp(8)}read-writecurrent
field
OBJECT-TYPE
The field on which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform object is set to 'transmitted' or 'disabled'.
1.3.6.1.4.1.1166.1.621.10.3.2INTEGER {field1(0), field2(1), na(2)}read-writecurrent
line
OBJECT-TYPE
The line into which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform object is set to 'transmitted' or 'disabled'.
1.3.6.1.4.1.1166.1.621.10.3.3INTEGER {line17(0), line18(1), na(2)}read-writecurrent
signalStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.11
acquisitionState
OBJECT-TYPE
The acquisition state for the active signal
1.3.6.1.4.1.1166.1.621.11.1INTEGER {locked(0), unLocked(1)}read-onlycurrent
authorizationState
OBJECT-TYPE
The authorization state for viewing the current signal. This object mirrors the 'Auth State' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.2INTEGER {missingMap(0), undefinedChannel(1), undefinedService(2), notInSync(3), noProgramRekey(4), noWorkingKey(5), noEventBlackOut(6), noCategoryKey(7), oldCategorySequence(8), programBought(9), programBoughtWithoutTaping(10), subscribedWithTaping(11), subscribedWithoutTaping(12), subscribedWithTapingPurchasable(13), ippvWithTaping(14), ippvWithoutTaping(15), badSeedChecksum(16), badDebitChecksum(17), ippvNotEnabled(18), insufficientCreditToPurchase(19), showCountLimitExceeded(20), debitRegisterWillOverflow(21), noAnytimeFreePreviewRecordsAvailable(22), maximumPackageCostExceeded(23), noIPPVOverlayInMessage(24), notSubscribed(25), regionalBlackout(26), eventBlackout(27), circulatBlackout(28), authorized(29), unencrypted(30), unknown(31)}read-onlycurrent
encryptionMode
OBJECT-TYPE
The encryption mode of the current signal. This object mirrors the 'Encryption' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.3INTEGER {encrypted(0), fixedWorkingKey(1), fixedProgramKey(2), unencrypted(3), na(4)}read-onlycurrent
unitAddr
OBJECT-TYPE
The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit. This object mirrors the 'Unit' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.4OCTET STRING (SIZE(19))read-onlycurrent
vctIDFast
OBJECT-TYPE
The current virtual channel table number. This object mirrors the 'VCT ID' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.5INTEGER (0..65535)read-onlycurrent
channelNum
OBJECT-TYPE
The virtual channel number of the current signal. This object mirrors the 'VC #' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.6INTEGER (1..4095)read-onlycurrent
serviceNumber
OBJECT-TYPE
The MPEG-2 service number, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Service #' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.7INTEGER (1..65535)read-onlycurrent
signalQuality
OBJECT-TYPE
The RF quality level of the current signal. This object mirrors the 'Signal Quality' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.8INTEGER (0..100)read-onlycurrent
signalPower
OBJECT-TYPE
The RF power level of the current signal, and measured in units of 0.1 dBm. For example, '-650' represents -65.0 dBm.
1.3.6.1.4.1.1166.1.621.11.9INTEGER (-800..0)read-onlycurrent
ebNo
OBJECT-TYPE
The signal to noise ration, Eb/No, of the current signal, and measured in units of 0.1 dB. For example, '-20' represents -2.0 dB '150' represents +15.0 dB This object mirrors the 'Eb/No' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.10INTEGER (-30..150)read-onlycurrent
symbolRate
OBJECT-TYPE
The symbol rate of the current signal. This object mirrors the 'Symbol Rate' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.11INTEGER {sr29Msps(0), sr19Msps(1), sr14Msps(2), sr11Msps(3), sr9Msps(4), sr7Msps(5), sr4Msps(6), sr3Msps(7), unknown(8)}read-onlycurrent
fecRate
OBJECT-TYPE
The FEC rate of the current signal. This object mirrors the 'FEC Rate' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.12INTEGER {cr5-11(0), cr1-2(1), cr1-92-8PSK(2), cr3-5(3), cr2-05-8PSK(4), cr2-3(5), cr2-11-8PSK(6), cr3-4(7), cr4-5(8), cr5-6(9), cr2-19-8PSK(10), cr7-8(11), cr2-30-8PSK(12), cr2-40-8PSK(13), unknown(14)}read-onlycurrent
freq
OBJECT-TYPE
The frequency of the L-band signal, in kHz, that is applied to the antenna connector on the unit's back panel. This object mirrors the 'Frequency' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.13INTEGER (950000..2150000)read-onlycurrent
satelliteName
OBJECT-TYPE
A 2 to 4 character satellite reference name, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Sat' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.14OCTET STRING (SIZE(1..4))read-onlycurrent
xpndrNumber
OBJECT-TYPE
The transponder number of the satellite, as indicated in the virtual channel map, for the current signal. A value of zero indicates the first transponder, and so on. This object mirrors the '/Xpndr' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.15INTEGER (0..63)read-onlycurrent
polarization
OBJECT-TYPE
The polarization, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Polarization' field in the Fast Facts 1 OSD.
1.3.6.1.4.1.1166.1.621.11.16INTEGER {h(0), v(1), unknown(2)}read-onlycurrent
muxStatus
OBJECT-TYPE
The multiplex format of the active L-Band signal
1.3.6.1.4.1.1166.1.621.11.17INTEGER {combined(0), split(1), unknown(2)}read-onlycurrent
ledStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.12
signalLED
OBJECT-TYPE
The Signal LED is on (illuminated) when the unit recognizes the signal as a DigiCipher II signal. This object mirrors the LED on the front panel
1.3.6.1.4.1.1166.1.621.12.1INTEGER {off(0), on(1), blink(2)}read-onlycurrent
authorizedLED
OBJECT-TYPE
The Authorized LED is on (illuminated) when the Signal LED is on and either (1) the programmer has transmitted the access messages to allow the unit to decrypt the signal or (2) the signal has been transmitted in an unencrypted of fixed encrypted mode. This object mirrors the LED on the front panel
1.3.6.1.4.1.1166.1.621.12.2INTEGER {off(0), on(1), blink(2)}read-onlycurrent
alarmConditionLED
OBJECT-TYPE
The Alarm condition LED is on (illuminated) when the IRD is in alarm state
1.3.6.1.4.1.1166.1.621.12.3INTEGER {off(0), on(1), blink(2)}read-onlycurrent
downloadLED
OBJECT-TYPE
The Download LED is on ( illuminated ) when an active download is in progress
1.3.6.1.4.1.1166.1.621.12.8INTEGER {off(0), on(1), blink(2)}read-onlycurrent
retuneMonitorMIB
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.13
retuneMonitorEnable
OBJECT-TYPE
Enables retune monitoring by the IRD. When read, this leaf provides the actual enable/disable status of the retune monitoring function in the IRD, and not just the last value that was written to this leaf. The IRD resets retuneMsgStatistic and all entries in the retuneMsgTable each time it receives an enable message; toggling enable/disable/enable is not required for this reset.
1.3.6.1.4.1.1166.1.621.13.1INTEGER {off(0), on(1)}read-writecurrent
retuneMsgStatistic
OBJECT-TYPE
The total number of new retune messages. This counter is incremented whenever the IRD detects a new retune message, but is not incremented by each instance (duplicate) of a retune message. This counter provides a useful troubleshooting tool for determining whether the IRD is detecting any retune messages. Range = 0x0000 - 0xFFFF. Note: This counter is not incremented for every possible retune message. This counter is only incremented when a retune becomes active. The IRD ignores retune messages in which the activation time is still in the future. The IRD also ignores any retune message if the activation time is further in the past than the current retune for the same virtual network.
1.3.6.1.4.1.1166.1.621.13.2INTEGER (0..65535)read-onlycurrent
retuneMsgVirtNetworkIDindex
OBJECT-TYPE
A table of retune messages is indexed by this target virtual network ID. This table does not have entries for each instance (duplicate) of a retune message that the IRD receives because the uplink repeatedly broadcasts instances of each retune message for the duration of the virtual network program. Instead, this table presents select metrics describing the retune message, as described below. Each table entry pertains to the most recent active retune message. A retune message is considered active when the activation time is in the past. The IRD replaces the current retuneMsgEntry when a new retune message is received having an activation time that is in the past but nearer to the present time than is the activation time of the current retuneMsgEntry. The IRD ignores retune messages in which the activation time is in the future. The virtual network ID indicates which retune message is targeted. This leaf serves as the index for the table. Make sure this index is set prior to accessing the following retune message parameters. Range = 1 - 256.
1.3.6.1.4.1.1166.1.621.13.3INTEGER (0..255)read-writecurrent
retuneMsgVCTid
OBJECT-TYPE
The target virtual channel map ID of the most recent active retune message. Range = 0 - 0xFFFF.
1.3.6.1.4.1.1166.1.621.13.4INTEGER (0..65535)read-onlycurrent
retuneMsgVirtChannel
OBJECT-TYPE
The target virtual channel of the most recent active retune message. Range = 0 - 4095.
1.3.6.1.4.1.1166.1.621.13.5INTEGER (0..4095)read-onlycurrent
retuneMsgActivationTime
OBJECT-TYPE
The activation time of the most recent active retune message. The activation time is a 32-bit count of GPS seconds since January 6, 1980, representing the time at which the retune is scheduled to occur. Past activation times are interpreted as immediate activation.
1.3.6.1.4.1.1166.1.621.13.6OCTET STRING (SIZE(1..4))read-onlycurrent
retuneMsgCRC
OBJECT-TYPE
The 4-byte CRC value of the most recent active retune message.
1.3.6.1.4.1.1166.1.621.13.7OCTET STRING (SIZE(1..4))read-onlycurrent
retuneMsgCnt
OBJECT-TYPE
The total number of instances that the IRD has received for the most recent active retune message. Range = 0 - 0xFFFF. Note: this counter is incremented when a retune message is received for which the CRC of that retune message matches the CRC of the current retune message (i.e., the value of retuneMsgCRC).
1.3.6.1.4.1.1166.1.621.13.8INTEGER (0..65535)read-onlycurrent
identificationGroup
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.14
identMIBVersion
OBJECT-TYPE
The version number of this MIB.
1.3.6.1.4.1.1166.1.621.14.1DisplayStringread-onlycurrent
identUnitModel
OBJECT-TYPE
The unit model of this IRD.
1.3.6.1.4.1.1166.1.621.14.2DisplayStringread-onlycurrent
acpMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.15
acpMode
OBJECT-TYPE
Setup mode for the authorization control processor.
1.3.6.1.4.1.1166.1.621.15.1INTEGER {auto(0), manual(1)}read-writecurrent
acpIndex
OBJECT-TYPE
Number uniquely identifying the ACP and keystream pair.
1.3.6.1.4.1.1166.1.621.15.2INTEGER (0..63)read-writecurrent
acpProgram
OBJECT-TYPE
The MPEG service number of the program.
1.3.6.1.4.1.1166.1.621.15.3INTEGER (0..65535)read-writecurrent
acpUnitAddress
OBJECT-TYPE
The electronic address of the selected ACP in the following format: ddd-ddddd-ddddd where d = decimal digit.
1.3.6.1.4.1.1166.1.621.15.4OCTET STRING (SIZE(15))read-onlycurrent
acpKeyStream
OBJECT-TYPE
The selected keystream.
1.3.6.1.4.1.1166.1.621.15.5INTEGER (0..3)read-onlycurrent
acpAuthState
OBJECT-TYPE
This field displays the authorization status of the ACP for the current Service association. AU -- Authorization NA -- Not Authorized The unit presents dashes when no information is available
1.3.6.1.4.1.1166.1.621.15.6OCTET STRING (SIZE(2))read-onlycurrent
acpEncryptMode
OBJECT-TYPE
This field displays the Encryption Mode of the service being decrypted by the selected ACP. The different values are FP - Fixed Program Key FW - Fixed Working Key S - Scrambled ZK - Unencrypted The unit presents dashes when no information is available
1.3.6.1.4.1.1166.1.621.15.7OCTET STRING (SIZE(1..2))read-onlycurrent
testMib
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16
audio
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.1
primaryAudioLock
OBJECT-TYPE
Gives Primary Audio is locked or not
1.3.6.1.4.1.1166.1.621.16.1.1INTEGER {unLocked(0), locked(1)}read-onlycurrent
secondaryAudioLock
OBJECT-TYPE
Gives Secondary Audio is locked or not
1.3.6.1.4.1.1166.1.621.16.1.2INTEGER {unLocked(0), locked(1)}read-onlycurrent
primaryAudioPID
OBJECT-TYPE
Gives Primary Audio PID
1.3.6.1.4.1.1166.1.621.16.1.4INTEGER (0..8191)read-onlycurrent
secondaryAudioPID
OBJECT-TYPE
Gives Secondary Audio PID
1.3.6.1.4.1.1166.1.621.16.1.5INTEGER (0..8191)read-onlycurrent
video
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.2
videoLock
OBJECT-TYPE
Gives Video is locked or not
1.3.6.1.4.1.1166.1.621.16.2.1INTEGER {unLocked(0), locked(1)}read-onlycurrent
videoPID
OBJECT-TYPE
Gives video PID
1.3.6.1.4.1.1166.1.621.16.2.2INTEGER (0..8191)read-onlycurrent
codeDownload
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.3
codeDownloadBit
OBJECT-TYPE
Monitor the Code Download process 0 - off 1 - on
1.3.6.1.4.1.1166.1.621.16.3.1INTEGER {off(0), on(1)}read-onlycurrent
irdStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.4
falseLock
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.4.1
falseLockStatus
OBJECT-TYPE
Checks for false lock
1.3.6.1.4.1.1166.1.621.16.4.1.1INTEGER {unLocked(0), locked(1)}read-onlycurrent
alarmLedStatus
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.4.2
alarmLEDBlinkStatus
OBJECT-TYPE
0 - LED is not blinking(OFF/ON) 1 - LED is blinking
1.3.6.1.4.1.1166.1.621.16.4.2.1INTEGER {notBlinking(0), blinking(1)}read-onlycurrent
messages
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.5
patMsgCount
OBJECT-TYPE
Gives PAT Message Count
1.3.6.1.4.1.1166.1.621.16.5.1INTEGER (0..65535)read-onlycurrent
caMsgCount
OBJECT-TYPE
Gives CA Message Count
1.3.6.1.4.1.1166.1.621.16.5.2INTEGER (0..65535)read-onlycurrent
pmtMsgCount
OBJECT-TYPE
Gives PMT message Count
1.3.6.1.4.1.1166.1.621.16.5.3INTEGER (0..65535)read-onlycurrent
niMsgCount
OBJECT-TYPE
Gives Network Information Message Count
1.3.6.1.4.1.1166.1.621.16.5.4INTEGER (0..65535)read-onlycurrent
networkTextMsgCount
OBJECT-TYPE
Gives Network text Message Count
1.3.6.1.4.1.1166.1.621.16.5.5INTEGER (0..65535)read-onlycurrent
virtualChannelMsgCount
OBJECT-TYPE
Gives Virtual channel message Count
1.3.6.1.4.1.1166.1.621.16.5.6INTEGER (0..65535)read-onlycurrent
subtitleMsgCount
OBJECT-TYPE
Gives Subtitle Message Count
1.3.6.1.4.1.1166.1.621.16.5.7INTEGER (0..65535)read-onlycurrent
coMsgCount
OBJECT-TYPE
Gives Channel Override Message Count
1.3.6.1.4.1.1166.1.621.16.5.8INTEGER (0..65535)read-onlycurrent
dwnldPreMsgCount
OBJECT-TYPE
Gives Download preamble message Count
1.3.6.1.4.1.1166.1.621.16.5.9INTEGER (0..65535)read-onlycurrent
dwnldMsgCount
OBJECT-TYPE
Gives Download Message Count
1.3.6.1.4.1.1166.1.621.16.5.10INTEGER (0..65535)read-onlycurrent
emmMsgCount
OBJECT-TYPE
Gives EMM Message Count
1.3.6.1.4.1.1166.1.621.16.5.11INTEGER (0..65535)read-onlycurrent
fingerPrintMessageCount
OBJECT-TYPE
Gives Finger Print message Count
1.3.6.1.4.1.1166.1.621.16.5.12INTEGER (0..65535)read-onlycurrent
hcmMsgCount
OBJECT-TYPE
Gives hardware control Message Count
1.3.6.1.4.1.1166.1.621.16.5.13INTEGER (0..65535)read-onlycurrent
uimMsgCount
OBJECT-TYPE
Gives Unit information message Count
1.3.6.1.4.1.1166.1.621.16.5.14INTEGER (0..65535)read-onlycurrent
evenBlkoutMsgCount
OBJECT-TYPE
Gives Event Blckout Message message Count
1.3.6.1.4.1.1166.1.621.16.5.15INTEGER (0..65535)read-onlycurrent
rf
OBJECT-IDENTITY
1.3.6.1.4.1.1166.1.621.16.6
frequencyOffset
OBJECT-TYPE
The acquired offset of the L-band frequency in MHz.
1.3.6.1.4.1.1166.1.621.16.6.1INTEGER (-100..100)read-onlycurrent
ber
OBJECT-TYPE
This displays Bit Errors.
1.3.6.1.4.1.1166.1.621.16.6.2INTEGER (0..65535)read-onlycurrent
ebno
OBJECT-TYPE
This displays the Eb/No measured in the IRD.
1.3.6.1.4.1.1166.1.621.16.6.3INTEGER (-10..50)read-onlycurrent
rserror
OBJECT-TYPE
This displays the Reed Solomon Errors.
1.3.6.1.4.1.1166.1.621.16.6.4INTEGER (0..65535)read-onlycurrent
lostlockcount
OBJECT-TYPE
This displays the number of times tuner lost lock.
1.3.6.1.4.1.1166.1.621.16.6.5INTEGER (0..65535)read-onlycurrent
clearrserror
OBJECT-TYPE
Clears the rserror counter to zero.
1.3.6.1.4.1.1166.1.621.16.6.6INTEGER {yes(0), no(1)}read-writecurrent
clearlostlockcount
OBJECT-TYPE
Clears the lostlockcount counter to zero.
1.3.6.1.4.1.1166.1.621.16.6.7INTEGER {yes(0), no(1)}read-writecurrent
snr
OBJECT-TYPE
This displays the SNR value.
1.3.6.1.4.1.1166.1.621.16.6.8INTEGER (0..65535)read-onlycurrent