MIBs Depot

AWCVX-MIB

Registered at
1.3.6.1.4.1.522
Namespace
aironet
Source file
AWCVX-MIB
Digest
sha256:6cb2f8adce044d2120562f357af220ad281bc6717a45ba90bf98c31f7070de2c

Imports

FromSymbols
BRIDGE-MIBdot1dTpPort
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, iso
SNMPv2-SMI-v1enterprises
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION
SNMPv2-TC-v1DisplayString, MacAddress, RowStatus, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AWCVX-MIB
BRIDGE-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-SMI-v1
SNMPv2-TC
SNMPv2-TC-v1

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.522.3awcVx

Textual conventions

NameOIDSyntaxAccessStatus
AwcDdpProdDevID
type
AwcDdpRadioDevID
type
AwcDot11ClientState
type
AwcDot11EventDisposition
type
AwcDot11MicAlgorithm
type
AwcDot11WEPKeyPermuteAlgorithm
type
AwcEventDisposition
type
AwcEventSeverity
type
AwcHotStandbyState
type
AwcHotStandbyStatus
type
AwcInvokeCommand
type
AwcPfDisposition
type
AwcPfPriority
type
AwcPolId
type
AwcTpFdbClassID
type
AwcVlanId
type
WEPKeytype128
type

Objects

NameOIDSyntaxAccessStatus
aironet
OBJECT-IDENTITY
1.3.6.1.4.1.522
awcVx
OBJECT-IDENTITY
1.3.6.1.4.1.522.3
awcSystem
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.1
vxWorksVersion
OBJECT-TYPE
The version of the underlying VxWorks operating system.
1.3.6.1.4.1.522.3.1.1DisplayString (SIZE(0..128))read-onlymandatory
creationDate
OBJECT-TYPE
The date and time the Access Point system code was initially compiled.
1.3.6.1.4.1.522.3.1.2DisplayString (SIZE(0..128))read-onlymandatory
awcVxVersion
OBJECT-TYPE
The version of the Access Point system code.
1.3.6.1.4.1.522.3.1.3DisplayString (SIZE(0..128))read-onlymandatory
sysFlags
OBJECT-TYPE
The VxWorks sysFlags system-configuration flags in use by the Access Point system. Not used by system code with awcVxVersion from 10.00 to 11.06.
1.3.6.1.4.1.522.3.1.4Gaugeread-writemandatory
languageCode
OBJECT-TYPE
The language currently in use by the system. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.1.5DisplayString (SIZE(0..128))read-writemandatory
awcDevID
OBJECT-TYPE
The Aironet DDP protocol device ID of the system when using the full capabilities with which the system is licensed. Note that a system may be configured to use fewer capabilities that those for which it is licensed. For example, a Bridge may be configured for use as an Access Point.
1.3.6.1.4.1.522.3.1.6Gaugeread-onlymandatory
awcDevIDtxt
OBJECT-TYPE
Textual representation of awcDevID. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.1.7DisplayString (SIZE(0..128))read-onlymandatory
enableHTTP
OBJECT-TYPE
If true, the Access Point's HTTP server can accept connections from other network devices. If false, the Access Point's HTTP server will only accept connections from the Access Point's console or indirectly over TELNET.
1.3.6.1.4.1.522.3.1.8TruthValueread-writemandatory
enableTelnet
OBJECT-TYPE
If true, the Access Point's TELNET server can accept connections from other network devices. If false, all TELNET connections will be refused.
1.3.6.1.4.1.522.3.1.9TruthValueread-writemandatory
enableSNMP
OBJECT-TYPE
If true, the Access Point's SNMP agent can accept connections from other network devices. If false, all SNMP connections will be refused. Note that this can only be set to false by an SNMP management station. If false, it can only be set to true by non-SNMP means.
1.3.6.1.4.1.522.3.1.10TruthValueread-writemandatory
enableDnsResolver
OBJECT-TYPE
If true, the Access Point will attempt to resolve IP address references through all configured DNS servers and will attempt to perform reverse-lookup via all configured DNS servers when displaying IP addresses. If false, the Access Point will interpret and display only explicit numeric IP addresses.
1.3.6.1.4.1.522.3.1.11TruthValueread-writemandatory
enableSNTP
OBJECT-TYPE
If true, the Access Point will attempt to periodically update its wall-clock time via a configured SNTP server. If false, the Access Point wall-clock time must be manually adjusted.
1.3.6.1.4.1.522.3.1.13TruthValueread-writemandatory
enableWDB
OBJECT-TYPE
If true, the Access Point will enable use of the VxWorks WDB debugger upon its next reboot. If false, no WDB debugging services will be available after the next reboot. The value of enableWDB is applicable only to special diagnostic versions of the Access Point system code.
1.3.6.1.4.1.522.3.1.14TruthValueread-writemandatory
pingTxLen
OBJECT-TYPE
The size in octets of ping packets transmitted by the Access Point. Default 64.
1.3.6.1.4.1.522.3.1.15Gauge (12..4096)read-writemandatory
awcFirstBoot
OBJECT-TYPE
If true, no user-specified configuration has been saved by the Access Point since either the system left Cisco manufacturing or since the user performed a Reset All System Factory Defaults operation. If false, a change in configuration has been saved by the user. Note that configurations specified solely via boot protocols such as DHCP or BOOTP are not considered user-specified for purposes of changing awcFirstBoot.
1.3.6.1.4.1.522.3.1.16TruthValueread-writemandatory
awcOemOUI
OBJECT-TYPE
The IEEE Organizationally Unique Identifier of the reseller for which this system is branded.
1.3.6.1.4.1.522.3.1.17MacAddressread-onlymandatory
awcOemName
OBJECT-TYPE
The full name of the reseller for which this system is branded.
1.3.6.1.4.1.522.3.1.18DisplayString (SIZE(0..128))read-onlymandatory
awcOemNameShort
OBJECT-TYPE
An abbreviated name of the reseller for which this system is branded.
1.3.6.1.4.1.522.3.1.19DisplayString (SIZE(0..128))read-onlymandatory
awcOemHomeURL
OBJECT-TYPE
The URL of the corporate HTML home page of the reseller for which this system is branded.
1.3.6.1.4.1.522.3.1.20DisplayString (SIZE(0..128))read-onlymandatory
enablePSPF
OBJECT-TYPE
If true, Publicly-Secure Packet Forwarding mode is enabled (i.e. clients can not communicate with each other). If false, normal packet forwarding is used.
1.3.6.1.4.1.522.3.1.21TruthValueread-writemandatory
sysExceptionReboot
OBJECT-TYPE
If true, all access violations or other general faults in any task will result in a reboot of the system. If false, such errors will not result in a reboot, and thus diagnostics can be performed on the system.
1.3.6.1.4.1.522.3.1.24TruthValueread-writemandatory
bootblockVersion
OBJECT-TYPE
The version of the Access Point boot block (bootstrap loader) code.
1.3.6.1.4.1.522.3.1.25DisplayString (SIZE(0..128))read-onlymandatory
motherboardRevision
OBJECT-TYPE
Revision number of the Access Point system motherboard.
1.3.6.1.4.1.522.3.1.26Gaugeread-onlymandatory
enableSTP
OBJECT-TYPE
If true and the system is licensed with Bridge capabilities, the IEEE 802.1D Spanning Tree Protocol will be be used to control packet forwarding on all network interfaces. If false or the system is not licensed with Bridge capabilities, the system will use Access Point heuristics to control packet forwarding on all network interfaces.
1.3.6.1.4.1.522.3.1.27TruthValueread-writemandatory
enableRebootKey
OBJECT-TYPE
If true, the VxWorks Monitor Trap keystroke is enabled from the console and from Telnet. By default, this is <control-X>. Entering this character initiates a warm-restart of the system. If false, the VxWorks Monitor Trap keystroke is disabled.
1.3.6.1.4.1.522.3.1.28TruthValueread-writemandatory
awcLocateUnit
OBJECT-TYPE
If true, the unit will immediately begin flashing all three of its Status LEDs with an alternating pattern of amber and off. If false, the Status LEDs operate in their normal fashion.
1.3.6.1.4.1.522.3.1.29TruthValueread-writemandatory
bootconfigVx
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.2
bootconfigBootProtocol
OBJECT-TYPE
The protocol to be used for automatic configuration at the time of system bootstrap/reboot. Options BOOTP, DHCP, or none.
1.3.6.1.4.1.522.3.2.1INTEGER {none(1), bootp(2), dhcp(3)}read-writemandatory
bootconfigReadINI
OBJECT-TYPE
If always, the system will attempt to read a .ini-formatted configuration file upon every reboot. If never, the system will not attempt to read a .ini file upon reboot, even if a boot protocol is in use and the boot server specifies a file to be read. If ifSpecified, the system will attempt to read a .ini file upon reboot if and only if a boot protocol is in use and the boot server explicitly specifies a file to be read. The system attempts several filenames in the process of retrieving a .ini file without error. In order, these filenames are based on the system's BOOTP- or DHCP-assigned client name, then the MIB2 sysName, then the system's IP address, then, as a last resort, the BOOTP- or DHCP-assigned boot file name. For each filename, the system attempts to read first from the designated defaultFileServer, then, if not successful, from one of either the BOOTP/DHCP server itself or bootconfigFileServerAddr (if specified by the BOOTP/DHCP server).
1.3.6.1.4.1.522.3.2.2INTEGER {always(1), never(2), ifSpecified(3)}read-writemandatory
bootconfigServerConfigTimeout
OBJECT-TYPE
The time in seconds which the system should wait for a configuration response from a BOOTP server before falling back to the stored configuration.
1.3.6.1.4.1.522.3.2.3Gaugeread-writemandatory
bootconfigMultOfferTimeout
OBJECT-TYPE
The time, in seconds, which the system should wait for a better offer configuration response from a DHCP or BOOTP server before choosing the best current offer.
1.3.6.1.4.1.522.3.2.4Gaugeread-writemandatory
bootconfigReqLeaseDuration
OBJECT-TYPE
The requested DHCP lease duration, in minutes.
1.3.6.1.4.1.522.3.2.5Gaugeread-writemandatory
bootconfigMinLeaseDuration
OBJECT-TYPE
The minimum acceptable DHCP lease duration, in minutes.
1.3.6.1.4.1.522.3.2.6Gaugeread-writemandatory
bootconfigDev
OBJECT-TYPE
Text string identifying the network device used for bootstrapping the system via BOOTP or DHCP. This is only applicable in BOOTP mode or when the system is configured as a router, when not all the network interfaces share the same ifPhysAddress.
1.3.6.1.4.1.522.3.2.7DisplayString (SIZE(0..128))read-writemandatory
bootconfigClientAddr
OBJECT-TYPE
IPv4 network address of this device, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.8IpAddressread-onlymandatory
bootconfigHostAddr
OBJECT-TYPE
IPv4 network address of the BOOTP or DHCP server from which the configuration of this device was leased.
1.3.6.1.4.1.522.3.2.9IpAddressread-onlymandatory
bootconfigBootFile
OBJECT-TYPE
Name of the default boot configuration file, specified by the BOOTP or DHCP server, containing the system configuration to be utilized by this device. This is considered a default configuration file because many DHCP servers are not capable of distinguishing boot files between different clients.
1.3.6.1.4.1.522.3.2.10DisplayString (SIZE(0..128))read-onlymandatory
bootconfigSubnetMask
OBJECT-TYPE
IPv4 network subnet mask to be used by this device, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.11IpAddressread-onlymandatory
bootconfigGateway
OBJECT-TYPE
IPv4 network address of the default network gateway to be used by this device, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.12IpAddressread-onlymandatory
bootconfigHostName
OBJECT-TYPE
Textual name of the BOOTP or DHCP server from which the configuration of this device was leased. This should be a DNS-recognizable host name.
1.3.6.1.4.1.522.3.2.13DisplayString (SIZE(0..128))read-onlymandatory
bootconfigClientName
OBJECT-TYPE
Textual name of this device, as determined by the BOOTP or DHCP protocol. This should be a DNS-recognizable host name.
1.3.6.1.4.1.522.3.2.14DisplayString (SIZE(0..128))read-onlymandatory
bootconfigNameServerTable
OBJECT-TYPE
Table of DNS Name Servers provided by the bootconfigHostAddr Boot Server.
1.3.6.1.4.1.522.3.2.15not-accessiblemandatory
bootconfigNameServerEntry
OBJECT-TYPE
An entry in bootconfigNameServerTable.
1.3.6.1.4.1.522.3.2.15.1not-accessiblemandatory
bootconfigNameServerPriority
OBJECT-TYPE
The priority order in which a domain name server is queried. Lower values are queried first.
1.3.6.1.4.1.522.3.2.15.1.1INTEGER (1..3)read-onlymandatory
bootconfigNameServer
OBJECT-TYPE
The IPv4 address of a domain name server.
1.3.6.1.4.1.522.3.2.15.1.2IpAddressread-onlymandatory
bootconfigDomainName
OBJECT-TYPE
Name of the IP domain of which this device is a member, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.16DisplayString (SIZE(0..128))read-onlymandatory
bootconfigSntpServer
OBJECT-TYPE
IPv4 network address of SNTP server for use by this device, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.17IpAddressread-onlymandatory
bootconfigSaveServerResponse
OBJECT-TYPE
If true, the leased configuration from a boot server is saved as the new system defaults. If false, system defaults remain unchanged when a new configuration is leased.
1.3.6.1.4.1.522.3.2.18TruthValueread-writemandatory
bootconfigCmdInvokeIniLoad
OBJECT-TYPE
Initiate loading of an initialization script '.ini' file from the file server into the system FLASH. Commands recognized: start.
1.3.6.1.4.1.522.3.2.19AwcInvokeCommandread-writemandatory
bootconfigCmdStatusIniLoad
OBJECT-TYPE
Status of the most recent command to load an initialization script '.ini' file. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = The '.ini' file was not found on the file server. 12 = Insufficient memory to load the '.ini' file. 22 = Invalid '.ini' file format. 35 = File format of the '.ini' file is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
1.3.6.1.4.1.522.3.2.20INTEGERread-onlymandatory
bootconfigDhcpClassID
OBJECT-TYPE
Specification of the DHCP Class Identifier presented by the system when requesting DHCP leases.
1.3.6.1.4.1.522.3.2.24DisplayString (SIZE(0..128))read-writemandatory
bootconfigFileServerAddr
OBJECT-TYPE
IPv4 network address of the file server from which to read configuration files, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.25IpAddressread-onlymandatory
bootconfigLogServerAddr
OBJECT-TYPE
IPv4 network address of the host to receive SYSLOG messages, as determined by the BOOTP or DHCP protocol.
1.3.6.1.4.1.522.3.2.26IpAddressread-onlymandatory
bootconfigBootCount
OBJECT-TYPE
The number of times the system code has been restarted since the system left Cisco manufacturing.
1.3.6.1.4.1.522.3.2.27Gaugeread-onlymandatory
bootconfigDhcpClientIdType
OBJECT-TYPE
The ARP hardware type, per RFC 1700, of bootconfigDhcpClientIdValue. If it is not a hardware address (e.g. is a fully-qualified domain name), a value of 0 will be used for the DHCP Client Identifier 'htype' field.
1.3.6.1.4.1.522.3.2.28INTEGER {ethernet10Mb(1), experimentalEthernet3Mb(2), amateurRadioAxDot25(3), proteonProNetTokenRing(4), chaos(5), ieee802Networks(6), arcnet(7), hyperchannel(8), lanstar(9), autonet(10), localTalk(11), localNet(12), nonHardware(128)}read-writemandatory
bootconfigDhcpClientIdValue
OBJECT-TYPE
Specification of the DHCP unique client Identifier presented by the system when requesting DHCP leases.
1.3.6.1.4.1.522.3.2.29DisplayString (SIZE(0..128))read-writemandatory
awcSerialDev
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.3
awcSerialConfigTable
OBJECT-TYPE
SerialConfigTable attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.3.1not-accessiblemandatory
awcSerialConfigEntry
OBJECT-TYPE
An entry in the awcSerialConfigEntry table.
1.3.6.1.4.1.522.3.3.1.1not-accessiblemandatory
serialDevIndex
OBJECT-TYPE
The index used to access rows in the awcSerialConfig table.
1.3.6.1.4.1.522.3.3.1.1.1INTEGER (1..2)read-onlymandatory
serialAdminStatus
OBJECT-TYPE
The requested status of the serial port.
1.3.6.1.4.1.522.3.3.1.1.2INTEGER {up(1), down(2), testing(3), error(4)}read-writemandatory
serialOperStatus
OBJECT-TYPE
The actual status of the serial port.
1.3.6.1.4.1.522.3.3.1.1.3INTEGER {up(1), down(2), testing(3), error(4)}read-onlymandatory
serialBaud
OBJECT-TYPE
The baud rate of the serial port.
1.3.6.1.4.1.522.3.3.1.1.4Gaugeread-writemandatory
serialParity
OBJECT-TYPE
The parity of the serial port.
1.3.6.1.4.1.522.3.3.1.1.5INTEGER {none(1), even(2), odd(3), one(4), zero(5)}read-writemandatory
serialDataBits
OBJECT-TYPE
The number of data bits per character recognized by the serial port.
1.3.6.1.4.1.522.3.3.1.1.6Gauge (7..8)read-writemandatory
serialStopBits
OBJECT-TYPE
The number of stop bits of the serial port.
1.3.6.1.4.1.522.3.3.1.1.7Gauge (1..2)read-writemandatory
serialFlowControl
OBJECT-TYPE
The flow control method used by the serial port.
1.3.6.1.4.1.522.3.3.1.1.8INTEGER {none(1), swXonXoff(2), hwRtsCts(3), swHwBoth(4)}read-writemandatory
serialTerminalType
OBJECT-TYPE
The terminal type of the serial port.
1.3.6.1.4.1.522.3.3.1.1.9INTEGER {teletype(1), ansi(2)}read-writemandatory
serialTerminalLines
OBJECT-TYPE
The number of horizontal lines available on each terminal page. Default 24.
1.3.6.1.4.1.522.3.3.1.1.10Gauge (16..50)read-writemandatory
serialTerminalColumns
OBJECT-TYPE
The number of vertical columns available on each terminal page. Default 80.
1.3.6.1.4.1.522.3.3.1.1.11Gauge (64..132)read-writemandatory
serialDevFd
OBJECT-TYPE
The VxWorks I/O File Descriptor used to access the serial device.
1.3.6.1.4.1.522.3.3.1.1.12INTEGERread-onlymandatory
awcFtp
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.4
defaultFileServer
OBJECT-TYPE
The name of the preferred file server to be used for all FTP and TFTP Put and Get operations. Max. name length is 128 octets.
1.3.6.1.4.1.522.3.4.1DisplayString (SIZE(0..128))read-writemandatory
awcFileXferProtocol
OBJECT-TYPE
The protocol to be used by the system for file transfer (TFTP or FTP).
1.3.6.1.4.1.522.3.4.2INTEGER {tftp(1), ftp(2)}read-writemandatory
awcFileXferUser
OBJECT-TYPE
The name of the user, as required by all FTP file transfers. Max. name length is 128 octets.
1.3.6.1.4.1.522.3.4.3DisplayString (SIZE(0..128))read-writemandatory
awcFileXferPassword
OBJECT-TYPE
The password of the user, as required by all FTP file transfers. Max. password length is 128 octets.
1.3.6.1.4.1.522.3.4.4DisplayString (SIZE(0..128))read-writemandatory
awcFileXferCmdInvokeFileLoad
OBJECT-TYPE
Initiate loading of all specified files from the file server into the system FLASH. Commands recognized: start.
1.3.6.1.4.1.522.3.4.5AwcInvokeCommandread-writemandatory
awcFileXferCmdStatusFileLoad
OBJECT-TYPE
Status of the most recent command to load the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = At least one file was not found on the file server. 12 = Insufficient memory to load all files. 22 = No file specified, or invalid file format. 35 = File format of at least one of the files is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
1.3.6.1.4.1.522.3.4.6INTEGERread-onlymandatory
awcFileXferCmdInvokeFileSave
OBJECT-TYPE
Initiate saving of all specified fileXferFile* files to the file server from the system FLASH. Commands recognized: start.
1.3.6.1.4.1.522.3.4.7AwcInvokeCommandread-writemandatory
awcFileXferCmdStatusFileSave
OBJECT-TYPE
Status of the most recent command to save the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 1 = Insufficient permission to save the files. 2 = A directory specified for saving at least one of the files was not found. 22 = No file specified, or invalid file format. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
1.3.6.1.4.1.522.3.4.8INTEGERread-onlymandatory
awcFileXferFileFirmwareSystem
OBJECT-TYPE
The filename of the system firmware image. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.4.9DisplayString (SIZE(0..128))read-writemandatory
awcFileXferFileFirmwareRadio0
OBJECT-TYPE
The filename of the radio firmware image. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.4.10DisplayString (SIZE(0..128))read-writemandatory
awcFileXferFileWebUI
OBJECT-TYPE
The filename of the system Web pages image. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.4.11DisplayString (SIZE(0..128))read-writemandatory
awcFileXferFileFpgaPcmcia
OBJECT-TYPE
The filename of the FPGA image for the PCMCIA controller. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.4.12DisplayString (SIZE(0..128))read-writemandatory
awcFileXferTftpPort
OBJECT-TYPE
IP port number over which to perform TFTP operations. Default 69.
1.3.6.1.4.1.522.3.4.13INTEGER (1..65535)read-writemandatory
awcFileXferFtpDirectory
OBJECT-TYPE
Directory on defaultFileServer in which files are located.
1.3.6.1.4.1.522.3.4.14DisplayString (SIZE(0..128))read-writemandatory
awcFileXferFilesFLASH
OBJECT-TYPE
The filename of a complete FLASH firmware image for the system, including all non-configuration files within the system FLASH file system. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.4.17DisplayString (SIZE(0..128))read-writemandatory
awcFileXferFileFirmwareRadio1
OBJECT-TYPE
The filename of the radio firmware image. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.4.18DisplayString (SIZE(0..128))read-writemandatory
awcIfTable
OBJECT-TYPE
IfTable attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.5not-accessiblemandatory
awcIfEntry
OBJECT-TYPE
An entry in the awcIfEntry table.
1.3.6.1.4.1.522.3.5.1not-accessiblemandatory
awcIfDefaultPhysAddress
OBJECT-TYPE
The default, factory-assigned MAC address of the interface. Guaranteed to be unique across all IEEE 802 devices.
1.3.6.1.4.1.522.3.5.1.1MacAddressread-onlymandatory
awcIfPhysAddress
OBJECT-TYPE
The MAC address to be used by the interface. If awcIfDefaultPhysAddress is to be used, this is 00:00:00:00:00:00.
1.3.6.1.4.1.522.3.5.1.2MacAddressread-writemandatory
awcIfAdoptPrimaryIdentity
OBJECT-TYPE
If true, this interface adopts the identity of bootconfigDev, the primary interface. This includes MAC address, IP address, etc. This is the conventional mode of operation when operating as a transparent bridge. If false, this interface always has a unique MAC address.
1.3.6.1.4.1.522.3.5.1.3TruthValueread-writemandatory
awcIfDefaultIpAddress
OBJECT-TYPE
The default IPv4 Address of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server.
1.3.6.1.4.1.522.3.5.1.4IpAddressread-writemandatory
awcIfDefaultIpNetMask
OBJECT-TYPE
The default IPv4 netmask of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server.
1.3.6.1.4.1.522.3.5.1.5IpAddressread-writemandatory
awcIfIpAddress
OBJECT-TYPE
The IPv4 Address currently in use by the interface.
1.3.6.1.4.1.522.3.5.1.6IpAddressread-onlymandatory
awcIfIpNetMask
OBJECT-TYPE
The IPv4 netmask currently in use by the interface.
1.3.6.1.4.1.522.3.5.1.7IpAddressread-onlymandatory
awcIfMSDUMaxLength
OBJECT-TYPE
Maximum length of the data portion of a packet for this particular interface. This is the maximum MAC Service Data Unit length, which is greater than or equal to ifMtu, depending on the configured MAC-level encapsulation.
1.3.6.1.4.1.522.3.5.1.8Gaugeread-onlymandatory
awcIfOutDiscardsCoS0
OBJECT-TYPE
The number of outbound packets of CoS 0 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.9Counterread-onlymandatory
awcIfOutDiscardsCoS1
OBJECT-TYPE
The number of outbound packets of CoS 1 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.10Counterread-onlymandatory
awcIfOutDiscardsCoS2
OBJECT-TYPE
The number of outbound packets of CoS 2 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.11Counterread-onlymandatory
awcIfOutDiscardsCoS3
OBJECT-TYPE
The number of outbound packets of CoS 3 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.12Counterread-onlymandatory
awcIfOutDiscardsCoS4
OBJECT-TYPE
The number of outbound packets of CoS 4 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.13Counterread-onlymandatory
awcIfOutDiscardsCoS5
OBJECT-TYPE
The number of outbound packets of CoS 5 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.14Counterread-onlymandatory
awcIfOutDiscardsCoS6
OBJECT-TYPE
The number of outbound packets of CoS 6 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.15Counterread-onlymandatory
awcIfOutDiscardsCoS7
OBJECT-TYPE
The number of outbound packets of CoS 7 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
1.3.6.1.4.1.522.3.5.1.16Counterread-onlymandatory
awc802dot11
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.6
awcDot11smt
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.6.1
awcDot11StationConfigTable
OBJECT-TYPE
Station Config Table attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.1.1not-accessiblemandatory
awcDot11StationConfigEntry
OBJECT-TYPE
An entry in the awcDot11StationConfigTable table.
1.3.6.1.4.1.522.3.6.1.1.1not-accessiblemandatory
awcDot11StationRole
OBJECT-TYPE
The role of this station itself within the 802.11 BSS (radio cell) of which it is a member.
1.3.6.1.4.1.522.3.6.1.1.1.1INTEGER {roleClient(1), roleIBSS(2), roleRepeater(3), roleAP(4)}read-writemandatory
awcDot11PowerManagementSubMode
OBJECT-TYPE
When configured as roleClient, the Power Management Submode of the device.
1.3.6.1.4.1.522.3.6.1.1.1.2Gaugeread-writemandatory
awcDot11UseAWCExtensions
OBJECT-TYPE
If true, Aironet extensions to the basic 802.11 protocol are enabled. This results in better BSS performance and faster roaming. If false, only the basic 802.11 protocols are used. This ensures maximum compatibility with non-Aironet equipment.
1.3.6.1.4.1.522.3.6.1.1.1.3TruthValueread-writemandatory
awcDot11AllowAssocBroadcastSSID
OBJECT-TYPE
If true and awcDot11StationRole is either roleAP or roleRepeater, the radio will respond to Broadcast SSID Probe Requests and will broadcast its own SSID within its Beacons. If false, the radio will not respond to the Broadcast SSID and will not broadcast its SSID within Beacons.
1.3.6.1.4.1.522.3.6.1.1.1.4TruthValueread-writemandatory
awcDot11PrivacyOptionImplementedMaxRate
OBJECT-TYPE
The maximum Transmit bit rate supported by the radio when using WEP encryption. Expressed in standard 802.11 increments of 500Kb/sec.
1.3.6.1.4.1.522.3.6.1.1.1.5INTEGER (2..127)read-onlymandatory
awcDot11DesiredBSSLength
OBJECT-TYPE
The number of entries in awcDot11DesiredBSSTable.
1.3.6.1.4.1.522.3.6.1.1.1.6INTEGER (0..4)read-onlymandatory
awcDot11EnetEncapsulationDefault
OBJECT-TYPE
The Ethernet Encapsulation Transform type used within the BSS. Either IEEE 802.1H or RFC 1042 can be utilized. IEEE 802.1H provides exceptions for the Novel IPX and AARP protocols.
1.3.6.1.4.1.522.3.6.1.1.1.7INTEGER {encap802dot1H(1), encapRfc1042(2)}read-writemandatory
awcDot11ForceReqFirmwareVersion
OBJECT-TYPE
If true, the radio driver will only allow operation with the specific radio firmware revision with which it was originally tested. If false, the radio driver will allow operation with the radio firmware revision with which it was tested, or any later radio firmware revision.
1.3.6.1.4.1.522.3.6.1.1.1.8TruthValueread-writemandatory
awcDot11BridgeSpacing
OBJECT-TYPE
If this device is the root side of a Bridge configuration, this value is the distance in kilometers reported between this device and its farthest non-root Bridge.
1.3.6.1.4.1.522.3.6.1.1.1.9Gaugeread-writemandatory
awcDot11DesiredSSIDMaxAssociatedSTA
OBJECT-TYPE
The maximum number of 802.11 Stations which may Associate with this access point through either the Broadcast SSID or through dot11DesiredSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point.
1.3.6.1.4.1.522.3.6.1.1.1.10INTEGER (0..2007)read-writemandatory
awcDot11DesiredSSIDNumAssociatedSTA
OBJECT-TYPE
The current number of 802.11 Stations which are Associated with this access point through either the Broadcast SSID or through dot11DesiredSSID.
1.3.6.1.4.1.522.3.6.1.1.1.11INTEGER (0..2007)read-onlymandatory
awcDot11AuxiliarySSIDLength
OBJECT-TYPE
The maximum number of entries in awcDot11AuxiliarySSIDTable. If awcDot11MultipleSSIDPerBSSImplemented is FALSE, awcDot11AuxiliarySSIDLength must be 0.
1.3.6.1.4.1.522.3.6.1.1.1.12INTEGER (0..2007)read-onlymandatory
awcDot11MultipleSSIDPerBSSImplemented
OBJECT-TYPE
This attribute, when TRUE, indicates that the station implementation is capable of responding to 802.11 Probe Requests for SSIDs other than dot11DesiredSSID. The default value of this attribute is FALSE.
1.3.6.1.4.1.522.3.6.1.1.1.13TruthValueread-onlymandatory
awcDot11SymbolExtensionsImplemented
OBJECT-TYPE
This attribute, when TRUE, indicates that the station implementation is capable of generating Symbol, Inc. proprietary elements in its Beacons and Probe Responses. These elements enable support for Symbol Voice-over-IP (VoIP) phones. The default value of this attribute is FALSE.
1.3.6.1.4.1.522.3.6.1.1.1.14TruthValueread-onlymandatory
awcDot11SymbolExtensionsEnabled
OBJECT-TYPE
Should the Radio generate Symbol, Inc. proprietary elements in its Beacons and Probe Responses in support of Symbol VoIP phones?
1.3.6.1.4.1.522.3.6.1.1.1.15TruthValueread-writemandatory
awcDot11DesiredSSIDMicAlgorithm
OBJECT-TYPE
Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
1.3.6.1.4.1.522.3.6.1.1.1.16AwcDot11MicAlgorithmread-writemandatory
awcDot11DesiredSSIDWEPKeyPermuteAlgorithm
OBJECT-TYPE
Function through which the WEP encryption key is permuted between key renewal periods for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
1.3.6.1.4.1.522.3.6.1.1.1.17AwcDot11WEPKeyPermuteAlgorithmread-writemandatory
awcDot11DesiredSSIDInfrastructureWGB
OBJECT-TYPE
When true, Workgroup Bridge-class devices Associated to this access point through either the Broadcast SSID or dot11DesiredSSID are provided the class of service which is provided to network infrastructure stations by their parent access point. This includes use of the 802.11 reliable multicast protocol (4-address packets for multicast). When false, Workgroup Bridge-class devices are provided the class of service which is provided to ordinary client stations.
1.3.6.1.4.1.522.3.6.1.1.1.18TruthValueread-writemandatory
awcDot11DesiredSSIDDefaultPolId
OBJECT-TYPE
Default Policy Group Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that no special policies are to be applied by default.
1.3.6.1.4.1.522.3.6.1.1.1.19AwcPolIdread-writemandatory
awcDot11DesiredSSIDDefaultVlanId
OBJECT-TYPE
Default VLAN Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId.
1.3.6.1.4.1.522.3.6.1.1.1.20AwcVlanIdread-writemandatory
awcDot11DesiredSSIDEnableProxyMobileIP
OBJECT-TYPE
If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
1.3.6.1.4.1.522.3.6.1.1.1.21TruthValueread-writemandatory
awcDot11InfrastructureSSID
OBJECT-TYPE
Index of the SSID which all 802.11 infrastructure stations shall use for Association. If 0, an access point and its repeaters and other subordinate infrastructure devices will Associate through dot11DesiredSSID. If non-0, an access point and its subordinate infrastructure devices will Associate through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11InfrastructureSSID.
1.3.6.1.4.1.522.3.6.1.1.1.22INTEGER (0..2007)read-writemandatory
awcDot11QBSSElementImplemented
OBJECT-TYPE
This attribute, when TRUE, indicates that the station implementation is capable of generating 802.11e QBSS elements in its Beacons and Probe Responses. These elements enable support for basic 802.11 Quality of Service. The default value of this attribute is FALSE.
1.3.6.1.4.1.522.3.6.1.1.1.23TruthValueread-onlymandatory
awcDot11QBSSElementEnabled
OBJECT-TYPE
Should the Radio generate 802.11e QBSS elements in its Beacons and Probe Responses in support of 802.11 Quality of Service?
1.3.6.1.4.1.522.3.6.1.1.1.24TruthValueread-writemandatory
awcDot11InfrastructureSSIDExclusive
OBJECT-TYPE
Should this access point restrict all infrastructure stations to associate only through the SSID specified by awcDot11InfrastructureSSID?
1.3.6.1.4.1.522.3.6.1.1.1.25TruthValueread-writemandatory
awcDot11SendIGMPGeneralQuery
OBJECT-TYPE
Should this access point issue an IGMP General Query to all associated stations when they complete all required high-level authentication? Such an IGMP query can help configure multicast groups efficiently.
1.3.6.1.4.1.522.3.6.1.1.1.26TruthValueread-writemandatory
awcDot11NonRootMobility
OBJECT-TYPE
This object is used to determine if the radio should look for a better parent AP in heavy traffic condition when the awcDot11StationRole is roleClient(1) or roleRepeater(3). It will look for better parent if it is mobile(1) and will not look for better parent if it is stationary(2).
1.3.6.1.4.1.522.3.6.1.1.1.27INTEGER {mobile(1), stationary(2)}read-writemandatory
awcDot11AuthenticationAlgorithmsTable
OBJECT-TYPE
This table contains attributes to configure authentication algorithm parameters for associations through the SSID defined by IEEE802dot11-MIB dot11DesiredSSID object. It defines attributes additional to those defined in the IEEE802dot11-MIB dot11AuthenticationAlgorithmsTable. An interface may support multiple authentication algorithms. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). This table uses the dot11AuthenticationAlgorithmsIndex of the dot11AuthenticationAlgorithmsTable defined in the IEEE802dot11-MIB as the expansion index. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
1.3.6.1.4.1.522.3.6.1.2not-accessiblemandatory
awcDot11AuthenticationAlgorithmsEntry
OBJECT-TYPE
Each entry specifies Cisco Aironet product specific authentication algorithm configuration attributes of the dot11DesiredSSID on a radio interface.
1.3.6.1.4.1.522.3.6.1.2.1not-accessiblemandatory
awcDot11AuthenticationAlgorithmsIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of the columnar objects in the Aironet Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex.
1.3.6.1.4.1.522.3.6.1.2.1.1INTEGER (1..65536)not-accessiblemandatory
awcDot11AuthenticationRequireEAP
OBJECT-TYPE
If true, stations authenticating with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication.
1.3.6.1.4.1.522.3.6.1.2.1.2TruthValueread-writemandatory
awcDot11AuthenticationDefaultUcastAllowedToGoTo
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
1.3.6.1.4.1.522.3.6.1.2.1.3OCTET STRINGread-writemandatory
awcDot11WEPDefaultKeysTable
OBJECT-TYPE
Extension of dot11WEPDefaultKeysTable to allow for key lengths other than 40 bits.
1.3.6.1.4.1.522.3.6.1.3not-accessiblemandatory
awcDot11WEPDefaultKeysEntry
OBJECT-TYPE
An entry in the awcDot11WEPDefaultKeysTable table.
1.3.6.1.4.1.522.3.6.1.3.1not-accessiblemandatory
awcDot11WEPDefaultKeyIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1
1.3.6.1.4.1.522.3.6.1.3.1.1INTEGER (1..4)read-onlymandatory
awcDot11WEPDefaultKeyLen
OBJECT-TYPE
Length in octets of awcDot11WEPDefaultKeyValue. If 0, the corresponding awcDot11WEPDefaultKeyValue is not configured.
1.3.6.1.4.1.522.3.6.1.3.1.2INTEGER (0..13)read-writemandatory
awcDot11WEPDefaultKeyValue
OBJECT-TYPE
A WEP default secret key value. The value is write-only (attempt to read will result in return of a zero-length string).
1.3.6.1.4.1.522.3.6.1.3.1.3WEPKeytype128read-writemandatory
awcDot11PrivacyTable
OBJECT-TYPE
Additional information about the WEP capabilities of the device. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.1.5not-accessiblemandatory
awcDot11PrivacyEntry
OBJECT-TYPE
An entry in the awcDot11PrivacyTable table.
1.3.6.1.4.1.522.3.6.1.5.1not-accessiblemandatory
awcDot11WEPDefaultKeyMaxIndex
OBJECT-TYPE
The maximum WEP Default Key index which the radio supports. Range 1..4, or 0 if the radio does not support WEP.
1.3.6.1.4.1.522.3.6.1.5.1.1INTEGER (0..4)read-onlymandatory
awcDot11AllowEncrypted
OBJECT-TYPE
When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as the dot11ExcludeUnencrypted attribute is false. The default value of this attribute shall be false.
1.3.6.1.4.1.522.3.6.1.5.1.2TruthValueread-writemandatory
awcDot11WEPKeyMaxLen
OBJECT-TYPE
The maximum WEP Key Length which the radio supports. Range 0..16, or 0 if the radio does not support WEP. Note that, even if the radio supports more than 13 octets of key value, the current 802.11 standard only makes use of the first 13 octets.
1.3.6.1.4.1.522.3.6.1.5.1.3INTEGER (0..16)read-onlymandatory
awcDot11LEAPUserName
OBJECT-TYPE
User Name assigned to the system for use when authenticating with AAA servers.
1.3.6.1.4.1.522.3.6.1.5.1.4OCTET STRINGread-writemandatory
awcDot11LEAPPassword
OBJECT-TYPE
User Password (shared secret) assigned to the system for use when authenticating with AAA servers.
1.3.6.1.4.1.522.3.6.1.5.1.5OCTET STRING (SIZE(0..256))read-writemandatory
awcDot11DesiredBSSTable
OBJECT-TYPE
When the radio is not in roleAP, a list of preferred Access Points with which the radio should Associate. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.1.6not-accessiblemandatory
awcDot11DesiredBSSEntry
OBJECT-TYPE
An entry in the awcDot11DesiredBSSTable table.
1.3.6.1.4.1.522.3.6.1.6.1not-accessiblemandatory
awcDot11DesiredBSSIndex
OBJECT-TYPE
The priority order in which Preferred Access Points should be probed. Lower indices are probed first.
1.3.6.1.4.1.522.3.6.1.6.1.1INTEGER (1..4)read-onlymandatory
awcDot11DesiredBSS
OBJECT-TYPE
The BSS identifier (MAC address) of the Access Point with which the radio should try to Associate, or 00:00:00:00:00:00 if the BSS identifier for this priority is unspecified.
1.3.6.1.4.1.522.3.6.1.6.1.2MacAddressread-writemandatory
awcDot11AuxiliarySSIDTable
OBJECT-TYPE
When the radio is not in roleClient, a list of Stations which, when Associated to this system, shall always have the same AID.
1.3.6.1.4.1.522.3.6.1.7not-accessiblemandatory
awcDot11AuxiliarySSIDEntry
OBJECT-TYPE
An entry in the awcDot11AuxiliarySSIDTable table.
1.3.6.1.4.1.522.3.6.1.7.1not-accessiblemandatory
awcDot11AuxSSIDIndex
OBJECT-TYPE
Identifier of auxiliary SSIDs supported by the access point in addition to dot11DesiredSSID. Domain from 1 to awcDot11AuxiliarySSIDLength.
1.3.6.1.4.1.522.3.6.1.7.1.1INTEGER (1..2007)read-onlymandatory
awcDot11AuxSSID
OBJECT-TYPE
This attribute reflects a Service Set ID recognized by the access point. The access point shall respond to Probe Requests specifying this SSID, but does not advertise this SSID in its Beacons.
1.3.6.1.4.1.522.3.6.1.7.1.2OCTET STRING (SIZE(0..32))read-writemandatory
awcDot11AuxSSIDMaxAssociatedSTA
OBJECT-TYPE
The maximum number of 802.11 Stations which may Associate with this access point through awcDot11AuxSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point.
1.3.6.1.4.1.522.3.6.1.7.1.3INTEGER (0..2007)read-writemandatory
awcDot11AuxSSIDNumAssociatedSTA
OBJECT-TYPE
The current number of 802.11 Stations which are Associated with this access point through awcDot11AuxSSID.
1.3.6.1.4.1.522.3.6.1.7.1.4INTEGER (0..2007)read-onlymandatory
awcDot11AuxSSIDDefaultPolId
OBJECT-TYPE
Default Policy Group Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that no special policies are to be applied by default.
1.3.6.1.4.1.522.3.6.1.7.1.6AwcPolIdread-writemandatory
awcDot11AuxSSIDDefaultVlanId
OBJECT-TYPE
Default VLAN Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId.
1.3.6.1.4.1.522.3.6.1.7.1.7AwcVlanIdread-writemandatory
awcDot11AuxSSIDEnableProxyMobileIP
OBJECT-TYPE
If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point over awcDot11AuxSSID.
1.3.6.1.4.1.522.3.6.1.7.1.8TruthValueread-writemandatory
awcDot11AuxSSIDAuthAlgTable
OBJECT-TYPE
This (conceptual) table of attributes shall be a set of all the Aironet-specific parameters for each authentication algorithm supported by the station for each auxiliary SSID listed in awcDot11AuxiliarySSIDTable.
1.3.6.1.4.1.522.3.6.1.8not-accessiblemandatory
awcDot11AuxSSIDAuthAlgEntry
OBJECT-TYPE
An Entry (conceptual row) in the Aironet Auxiliary SSID Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
1.3.6.1.4.1.522.3.6.1.8.1not-accessiblemandatory
awcDot11AuxSSIDAuthAlgIndex
OBJECT-TYPE
The auxiliary variable used to identify instances of the columnar objects in the Aironet Auxiliary SSID Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex.
1.3.6.1.4.1.522.3.6.1.8.1.1INTEGER (1..65536)not-accessiblemandatory
awcDot11AuxSSIDAuthAlgEnable
OBJECT-TYPE
If true, stations may authenticate to the SSID specified by awcDot11AuxSSIDIndex with the algorithm corresponding to dot11AuthenticationAlgorithmsIndex.
1.3.6.1.4.1.522.3.6.1.8.1.2TruthValueread-writemandatory
awcDot11AuxSSIDAuthAlgRequireEAP
OBJECT-TYPE
If true, stations authenticating to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication.
1.3.6.1.4.1.522.3.6.1.8.1.3TruthValueread-writemandatory
awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
1.3.6.1.4.1.522.3.6.1.8.1.4OCTET STRINGread-writemandatory
awcDot11AssignedAIDTable
OBJECT-TYPE
When the radio is not functioning as a client station (i.e., awcDot11StationRole is not 'roleClient'), this is the list of AIDs which this agent will assign to the clients associating with it. An AID is assigned if the corresponding MAC address matches that of the client. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71).
1.3.6.1.4.1.522.3.6.1.9not-accessiblemandatory
awcDot11AssignedAIDEntry
OBJECT-TYPE
An entry in the awcDot11AssignedAIDTable table.
1.3.6.1.4.1.522.3.6.1.9.1not-accessiblemandatory
awcDot11AssignedAID
OBJECT-TYPE
An AID which shall be reserved for the exclusive use of a single Station.
1.3.6.1.4.1.522.3.6.1.9.1.1INTEGER (2..2007)read-onlymandatory
awcDot11AssignedSTA
OBJECT-TYPE
The Station (MAC address) which, when Associated to this system, shall always be assigned awcDot11AssignedAID as its 802.11 AID.
1.3.6.1.4.1.522.3.6.1.9.1.2MacAddressread-writemandatory
awcDot11AccessPointCountersTable
OBJECT-TYPE
This table includes radio statistics collected by the IEEE 802.11 radio interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
1.3.6.1.4.1.522.3.6.1.10not-accessiblemandatory
awcDot11AccessPointCountersEntry
OBJECT-TYPE
Each entry contains counters of frame transmissions and client associations for a radio interface.
1.3.6.1.4.1.522.3.6.1.10.1not-accessiblemandatory
awcDot11AssociatedStationCount
OBJECT-TYPE
Total number of successful 802.11 Association Request operations to this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.1Counterread-onlymandatory
awcDot11AuthenticatedStationCount
OBJECT-TYPE
Total number of successful 802.11 MAC-level Authentication operations to this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.2Counterread-onlymandatory
awcDot11ReassociatedStationCount
OBJECT-TYPE
Total number of successful 802.11 Reassociation Request operations to this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.3Counterread-onlymandatory
awcDot11RoamedStationCount
OBJECT-TYPE
Total number of times that clients which had successfully (re)associated with this access point successfully reassociated with another access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.4Counterread-onlymandatory
awcDot11DeauthenticateCount
OBJECT-TYPE
Total number of Deauthenticate frames sent over this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.5Counterread-onlymandatory
awcDot11DisassociateCount
OBJECT-TYPE
Total number of Disassociate frames sent over this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.6Counterread-onlymandatory
awcDot11EncapPktsMMH
OBJECT-TYPE
Total number of packets for which the a MIC has been requested to be calculated with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.7Counterread-onlymandatory
awcDot11DecapPktsMMH
OBJECT-TYPE
Total number of packets received over this radio of this access point since system startup and for which a MIC has been requested to be validated with the MMH algorithm.
1.3.6.1.4.1.522.3.6.1.10.1.8Counterread-onlymandatory
awcDot11EncapErrorsMMH
OBJECT-TYPE
Total number of packets which have failed MIC calculation with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup.
1.3.6.1.4.1.522.3.6.1.10.1.9Counterread-onlymandatory
awcDot11DecapErrorsMMH
OBJECT-TYPE
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm.
1.3.6.1.4.1.522.3.6.1.10.1.10Counterread-onlymandatory
awcDot11DecapExistsMMH
OBJECT-TYPE
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to sequence number and duplicate packet errors.
1.3.6.1.4.1.522.3.6.1.10.1.11Counterread-onlymandatory
awcDot11DecapAccessMMH
OBJECT-TYPE
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to cryptographic key-mismatch errors.
1.3.6.1.4.1.522.3.6.1.10.1.12Counterread-onlymandatory
awcDot11mac
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.6.2
awcDot11CountersTable
OBJECT-TYPE
This table contains MAC statistics on each of IEEE 802.11 interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
1.3.6.1.4.1.522.3.6.2.2not-accessiblemandatory
awcDot11CountersEntry
OBJECT-TYPE
Each entry contains counters of frame transmissions for a radio interface.
1.3.6.1.4.1.522.3.6.2.2.1not-accessiblemandatory
awcDot11TxDeferEnergyCount
OBJECT-TYPE
Total number of frames deferred transmission due to energy detect since system startup.
1.3.6.1.4.1.522.3.6.2.2.1.1Counterread-onlymandatory
awcDot11RxMacCrcErrorCount
OBJECT-TYPE
Total number of frames received with MAC CRC errors since system startup.
1.3.6.1.4.1.522.3.6.2.2.1.2Counterread-onlymandatory
awcDot11SsidMismatchCount
OBJECT-TYPE
Total number of Beacon or Probe Response frames received for which the SSID does not match dot11DesiredSSID since system startup.
1.3.6.1.4.1.522.3.6.2.2.1.3Counterread-onlymandatory
awcDot11QoSTable
OBJECT-TYPE
This (conceptual) table of attributes shall be a set of parameters for each traffic category (i.e. 802.1D priority) of packet passed over the radio.
1.3.6.1.4.1.522.3.6.2.4not-accessiblemandatory
awcDot11QoSEntry
OBJECT-TYPE
An Entry (conceptual row) in the Aironet Quality of Service Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
1.3.6.1.4.1.522.3.6.2.4.1not-accessiblemandatory
awcDot11QoSCoS
OBJECT-TYPE
The auxiliary variable used to identify instances of the columnar objects in the Aironet Quality of Service Table. This variable corresponds directly to the 802.1D traffic category ID, plus 1.
1.3.6.1.4.1.522.3.6.2.4.1.1INTEGER (1..8)not-accessiblemandatory
awcDot11QoSCWmin
OBJECT-TYPE
802.11 CWmin of the traffic category. The value of this OID must be one of the set 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be less than or equal to awcDot11QoSCWmax.
1.3.6.1.4.1.522.3.6.2.4.1.2INTEGER (0..1023)read-writemandatory
awcDot11QoSCWmax
OBJECT-TYPE
802.11 CWmax of the traffic category. The value of this OID must be one of the set 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be greater than or equal to awcDot11QoSCWmin.
1.3.6.1.4.1.522.3.6.2.4.1.3INTEGER (1..1023)read-writemandatory
awcDot11res
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.6.3
awcDot11resAttribute
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.6.3.1
awcDot11ResourceInfoTable
OBJECT-TYPE
Resource Info Table attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.3.1.2not-accessiblemandatory
awcDot11ResourceInfoEntry
OBJECT-TYPE
An entry in the awcDot11ResourceInfoTable table.
1.3.6.1.4.1.522.3.6.3.1.2.1not-accessiblemandatory
awcDot11FirmwareBootstrapVersion
OBJECT-TYPE
The firmware version of the radio boot block. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.6.3.1.2.1.1DisplayString (SIZE(0..128))read-onlymandatory
awcDot11phy
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.6.4
awcDot11PhyOperationTable
OBJECT-TYPE
awcDot11PhyOperationTable attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.4.1not-accessiblemandatory
awcDot11PhyOperationEntry
OBJECT-TYPE
An entry in the awcDot11PhyOperationTable table.
1.3.6.1.4.1.522.3.6.4.1.1not-accessiblemandatory
awcDot11CurrentCarrierSet
OBJECT-TYPE
The carrier set of the device. The Carrier Set implies a Regulatory Domain, but geographic-specific restrictions within a Regulatory Domain may necessitate several Carrier Sets within the Regulatory Domain.
1.3.6.1.4.1.522.3.6.4.1.1.1INTEGER {usa(0), europe(1), japan(2), spain(3), france(4), belgium(5), israel(6), canada(7), australia(8), japanWide(9), usa5GHz(11), europe5GHz(12), japan5GHz(13), singapore5GHz(14), taiwan5GHz(15), china(16)}read-onlymandatory
awcDot11ModulationType
OBJECT-TYPE
The RF modulation of the radio.
1.3.6.1.4.1.522.3.6.4.1.1.2INTEGER {standard(1), mok(2)}read-writemandatory
awcDot11PreambleType
OBJECT-TYPE
The current radio preamble type in use by the Station. Possible values: 1 = Use long preambles whenever possible. 2 = Use only short preambles.
1.3.6.1.4.1.522.3.6.4.1.1.3INTEGER {long(1), short(2)}read-writemandatory
awcDot11PHYType
OBJECT-TYPE
This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, DSSS 5.0 GHz = 11
1.3.6.1.4.1.522.3.6.4.1.1.5INTEGER {fhss(1), dsss(2), irbaseband(3), dsssDot11A(11)}read-onlymandatory
awcDot11PhyFHSSTable
OBJECT-TYPE
awcDot11PhyFHSSTable attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.4.4not-accessiblemandatory
awcDot11PhyFHSSEntry
OBJECT-TYPE
An entry in the awcDot11PhyFHSSTable table.
1.3.6.1.4.1.522.3.6.4.4.1not-accessiblemandatory
awcDot11Compatible3100
OBJECT-TYPE
Boolean on whether or not the Station should use 1Mb/sec management frames to be compatible with Aironet 3100 series radios.
1.3.6.1.4.1.522.3.6.4.4.1.1TruthValueread-writemandatory
awcDot11PhyDSSSTable
OBJECT-TYPE
awcDot11PhyDSSSTable attributes. In tabular form to allow for multiple instances on an agent.
1.3.6.1.4.1.522.3.6.4.5not-accessiblemandatory
awcDot11PhyDSSSEntry
OBJECT-TYPE
An entry in the awcDot11PhyDSSSTable table.
1.3.6.1.4.1.522.3.6.4.5.1not-accessiblemandatory
awcDot11Compatible4500
OBJECT-TYPE
Boolean on whether or not the Station should use 2Mb/sec management frames to be compatible with Aironet 4500 series radios.
1.3.6.1.4.1.522.3.6.4.5.1.1TruthValueread-writemandatory
awcDot11ChannelAutoImplemented
OBJECT-TYPE
If true, the radio can, when awcDot11StationRole is roleAP, scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. If false, the radio can only establish its BSS on dot11CurrentChannel.
1.3.6.1.4.1.522.3.6.4.5.1.2TruthValueread-onlymandatory
awcDot11ChannelAutoEnabled
OBJECT-TYPE
If true and awcDot11StationRole is roleAP, the radio will scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. After the scan, this station will establish its own BSS on the channel it considers to have the least probability of congestion. If false, this station always establishes its BSS on dot11CurrentChannel.
1.3.6.1.4.1.522.3.6.4.5.1.3TruthValueread-writemandatory
awcDot11CurrentChannel
OBJECT-TYPE
The current operating frequency channel of the DSSS PHY, as selected either by selective scanning or via dot11CurrentChannel. Valid channel numbers are as defined in 15.4.6.2
1.3.6.1.4.1.522.3.6.4.5.1.4INTEGER (1..14)read-onlymandatory
awcDot11SupportedDataRatesPrivacyTable
OBJECT-TYPE
For each transmit and receive bit rate, whether or not the radio can support WEP encryption at that rate.
1.3.6.1.4.1.522.3.6.4.11not-accessiblemandatory
awcDot11SupportedDataRatesPrivacyEntry
OBJECT-TYPE
An Entry (conceptual row) in the awcDot11SupportedDataRatesPrivacy Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
1.3.6.1.4.1.522.3.6.4.11.1not-accessiblemandatory
awcDot11SupportedDataRatesPrivacyIndex
OBJECT-TYPE
Index object which identifies which data rate to access. Range is 1..8.
1.3.6.1.4.1.522.3.6.4.11.1.1INTEGER (1..8)read-onlymandatory
awcDot11SupportedDataRatesPrivacyValue
OBJECT-TYPE
The receive or transmit bit rates supported by the PLCP and PMD, represented by a count from 0x02-0x7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s.
1.3.6.1.4.1.522.3.6.4.11.1.2INTEGER (2..127)read-onlymandatory
awcDot11SupportedDataRatesPrivacyImplemented
OBJECT-TYPE
Whether or not WEP encryption is supported by the radio for both Transmit and Receive operations at the corresponding bit rate specified by awcDot11SupportedDataRatesPrivacyValue.
1.3.6.1.4.1.522.3.6.4.11.1.3TruthValueread-onlymandatory
awcDot11ChanSelectTable
OBJECT-TYPE
This table specifies for each 802.11 channel, whether the scanning process controlled by the awcDot11ChannelAutoEnabled can select a particular channel for use. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
1.3.6.1.4.1.522.3.6.4.12not-accessiblemandatory
awcDot11ChanSelectEntry
OBJECT-TYPE
Each entry specifies if a particular radio channel is enabled on a radio interface.
1.3.6.1.4.1.522.3.6.4.12.1not-accessiblemandatory
awcDot11ChanSelectChannel
OBJECT-TYPE
802.11 channel which is a candidate for low-occupancy scanning.
1.3.6.1.4.1.522.3.6.4.12.1.1INTEGER (1..14)read-onlymandatory
awcDot11ChanSelectEnable
OBJECT-TYPE
If true, awcDot11ChanSelectChannel is available for the system to use as its awcDot11CurrentChannel after scanning for channel occupancy. If false, awcDot11ChanSelectChannel is not available.
1.3.6.1.4.1.522.3.6.4.12.1.2TruthValueread-writemandatory
awcUserMgr
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.7
userMgrConfigTable
OBJECT-TYPE
System User attributes.
1.3.6.1.4.1.522.3.7.1not-accessiblemandatory
userMgrConfigEntry
OBJECT-TYPE
An entry in the user manager table.
1.3.6.1.4.1.522.3.7.1.1not-accessiblemandatory
userMgrUserIndex
OBJECT-TYPE
The index of the user.
1.3.6.1.4.1.522.3.7.1.1.1Gaugeread-onlymandatory
userMgrUserName
OBJECT-TYPE
The name of the user. This should be unique across all users. Max. string length is 32 octets.
1.3.6.1.4.1.522.3.7.1.1.2DisplayString (SIZE(0..32))read-writemandatory
userMgrPassword
OBJECT-TYPE
The SHA-1 hashed password of the user in the user manager. When a plaintext password is written, it is automatically replaced by the SHA-1 Secure Hash of that plaintext, prefixed by a 4-octet magic cookie. Max. string length is 24 octets.
1.3.6.1.4.1.522.3.7.1.1.3OCTET STRING (SIZE(0..24))read-writemandatory
userMgrCapabilities
OBJECT-TYPE
Bitmask of the capabilities of the user. The value may be any combination (sum) of the following capability values: 0 = none 1 = Administrator 2 = Write 4 = Firmware Update 8 = Identity Update 16 = SNMP Community
1.3.6.1.4.1.522.3.7.1.1.4Gaugeread-writemandatory
userMgrStatus
OBJECT-TYPE
Row status of the user. Allows deletion via SNMP.
1.3.6.1.4.1.522.3.7.1.1.5RowStatusread-writemandatory
enableUserMgr
OBJECT-TYPE
If true, the User Manager subsystem is active. Web page, console, and SNMP access is restricted in accordance with userMgrCapabilities. If false, all users have full access to the system.
1.3.6.1.4.1.522.3.7.2TruthValueread-writemandatory
allowBrowseWithoutLogin
OBJECT-TYPE
If true, the HTTP user interface to read-only web pages can be accessed without passing HTTP authentication. If false, any HTTP access requires the user to pass HTTP authentication.
1.3.6.1.4.1.522.3.7.3TruthValueread-writemandatory
protectLegalPage
OBJECT-TYPE
Should the legal credits page be protected or not.
1.3.6.1.4.1.522.3.7.4TruthValueread-writemandatory
awcHttpd
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.8
defaultWebRoot
OBJECT-TYPE
File directory which contains the system's web site root file index.shm. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.8.1DisplayString (SIZE(0..128))read-writemandatory
defaultHelpRoot
OBJECT-TYPE
URL identifying the directory in which help pages for the system are located. This URL is prefixed to all help page links. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.8.2DisplayString (SIZE(0..128))read-writemandatory
getWebUI
OBJECT-TYPE
The name of an auxilliary set of HTML user interface files to be loaded at system boot time from defaultFileServer. Archive formats accepted include .tar and .tar.gz. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.8.3DisplayString (SIZE(0..128))read-writemandatory
cmdInvokeGetWebUI
OBJECT-TYPE
Initiate loading of the getWebUI file. Commands recognized: start.
1.3.6.1.4.1.522.3.8.4AwcInvokeCommandread-writemandatory
cmdStatusGetWebUI
OBJECT-TYPE
Status of the most recent command to load the auxilliary web User Interface pages. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = File not found on the file server. 12 = Insufficient memory to load all files. 20 = Identifier encountered while decoding is an ordinary file, not a directory. 22 = No file specified, or invalid file format. 35 = File format is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
1.3.6.1.4.1.522.3.8.5INTEGERread-onlymandatory
awcHttpdPort
OBJECT-TYPE
IP port number over which to perform HTTP operations.
1.3.6.1.4.1.522.3.8.6INTEGER (1..65535)read-writemandatory
awcConsoleAutoApply
OBJECT-TYPE
The current state of 'auto apply' mode on the console browser.
1.3.6.1.4.1.522.3.8.7TruthValueread-writemandatory
awcDnsRes
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.9
resolverDomain
OBJECT-TYPE
The name of the resolver domain currently in use by the system. Max. string length of 128 octets.
1.3.6.1.4.1.522.3.9.1DisplayString (SIZE(0..128))read-onlymandatory
resolverDomainSuffix
OBJECT-TYPE
The suffix name of the resolver domain. Used to abbreviate displayed host names. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.9.2DisplayString (SIZE(0..128))read-writemandatory
resolverDomainServerTable
OBJECT-TYPE
Table of DNS Name Servers currently in use by the system.
1.3.6.1.4.1.522.3.9.3not-accessiblemandatory
resolverDomainServerEntry
OBJECT-TYPE
An entry in resolverDomainServerTable.
1.3.6.1.4.1.522.3.9.3.1not-accessiblemandatory
resolverDomainServerPriority
OBJECT-TYPE
The priority order in which a domain name server is queried.
1.3.6.1.4.1.522.3.9.3.1.1INTEGER (1..3)read-onlymandatory
resolverDomainServer
OBJECT-TYPE
The IP Address of a domain name server currently in use by the system.
1.3.6.1.4.1.522.3.9.3.1.2DisplayStringread-onlymandatory
defaultResolverDomain
OBJECT-TYPE
The name of the resolver domain to be used by the system unless overridden by a BOOTP or DHCP server. Max. string length of 128 octets.
1.3.6.1.4.1.522.3.9.4DisplayString (SIZE(0..128))read-writemandatory
defaultResolverDomainServerTable
OBJECT-TYPE
Table of DNS Name Servers to be used by the system unless overridden by a BOOTP or DHCP server.
1.3.6.1.4.1.522.3.9.5not-accessiblemandatory
defaultResolverDomainServerEntry
OBJECT-TYPE
An entry in defaultResolverDomainServerTable.
1.3.6.1.4.1.522.3.9.5.1not-accessiblemandatory
defaultResolverDomainServerPriority
OBJECT-TYPE
The priority order in which a domain name server is queried.
1.3.6.1.4.1.522.3.9.5.1.1INTEGER (1..3)read-onlymandatory
defaultResolverDomainServer
OBJECT-TYPE
The IP Address of a domain name server to be used by the system unless overridden by a BOOTP or DHCP server.
1.3.6.1.4.1.522.3.9.5.1.2DisplayStringread-writemandatory
awcSnmp
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.10
snmpTrapDest
OBJECT-TYPE
The destination of an SNMP trap. This may be any DNS-recognizable IP address. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.10.1DisplayString (SIZE(0..128))read-writemandatory
snmpTrapCommunity
OBJECT-TYPE
The community name of the trap. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.10.2DisplayString (SIZE(0..128))read-writemandatory
awcSntp
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.11
defaultSntpServer
OBJECT-TYPE
The name of the SNTP server to be use by the system, unless overridden by a BOOTP or DHCP server. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.11.1DisplayString (SIZE(0..128))read-writemandatory
sntpServer
OBJECT-TYPE
The name of the SNTP server currently in use by the system. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.11.2DisplayString (SIZE(0..128))read-onlymandatory
awcForwardTbl
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.12
awcFtStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.12.1
awcFtMcastAddr
OBJECT-TYPE
Count of multicast addresses observed by the system.
1.3.6.1.4.1.522.3.12.1.1INTEGERread-onlymandatory
awcFtDsHost
OBJECT-TYPE
Count of DS (infrastructure) host addresses observed by the system over its own DS network interface (Ethernet).
1.3.6.1.4.1.522.3.12.1.3INTEGERread-onlymandatory
awcFtBridgeHost
OBJECT-TYPE
Count of DS (infrastructure) host addresses observed by the system on the remote side of a bridge.
1.3.6.1.4.1.522.3.12.1.5INTEGERread-onlymandatory
awcFtClientSTA
OBJECT-TYPE
Count of Client Station addresses observed by the system.
1.3.6.1.4.1.522.3.12.1.7INTEGERread-onlymandatory
awcFtClientSTASelf
OBJECT-TYPE
Count of Client Stations which are Associated to the system.
1.3.6.1.4.1.522.3.12.1.8INTEGERread-onlymandatory
awcFtBridge
OBJECT-TYPE
Count of non-root Bridge addresses observed by the system.
1.3.6.1.4.1.522.3.12.1.9INTEGERread-onlymandatory
awcFtBridgeSelf
OBJECT-TYPE
Count of non-root Bridges which are Associated to the system.
1.3.6.1.4.1.522.3.12.1.10INTEGERread-onlymandatory
awcFtRepeater
OBJECT-TYPE
Count of Repeater addresses observed by the system.
1.3.6.1.4.1.522.3.12.1.11INTEGERread-onlymandatory
awcFtRepeaterSelf
OBJECT-TYPE
Count of Repeater devices which are Associated to the system.
1.3.6.1.4.1.522.3.12.1.12INTEGERread-onlymandatory
awcFtAccessPoint
OBJECT-TYPE
Count of Access Point addresses observed by the system.
1.3.6.1.4.1.522.3.12.1.13INTEGERread-onlymandatory
awcFtBridgeRoot
OBJECT-TYPE
Count of Root Bridge addresses observed by the system.
1.3.6.1.4.1.522.3.12.1.15INTEGERread-onlymandatory
awcFtConfig
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.12.2
awcFtMaxNumEntries
OBJECT-TYPE
The maximum number of entries in the forwarding table. Must be a power of 2 from 1024 to 65536. The number of entries controls the size of the forwarding table and the hash algorithm used by the forwarding table. Changing the number of entries requires a system reboot.
1.3.6.1.4.1.522.3.12.2.1INTEGERread-writemandatory
awcFtTimeoutSecUnknown
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=unknown will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.2Gaugeread-writemandatory
awcFtTimeoutSecMcastAddr
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=multicast will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.3Gaugeread-writemandatory
awcFtTimeoutSecDsHost
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=dsHost will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.4Gaugeread-writemandatory
awcFtTimeoutSecBridgeHost
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=bridgeHost will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.5Gaugeread-writemandatory
awcFtTimeoutSecClientSTA
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=clientStation will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.6Gaugeread-writemandatory
awcFtTimeoutSecBridge
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=bridge will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.7Gaugeread-writemandatory
awcFtTimeoutSecRepeater
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=repeater will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.8Gaugeread-writemandatory
awcFtTimeoutSecAccessPoint
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=accessPoint will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.9Gaugeread-writemandatory
awcFtTimeoutSecBridgeRoot
OBJECT-TYPE
The default number of seconds an Entry with awcTpFdbClassID=bridgeRoot will remain in the Forwarding Table before being staled-out.
1.3.6.1.4.1.522.3.12.2.10Gaugeread-writemandatory
awcFtEnableAwcTpFdbTable
OBJECT-TYPE
If true, the system will populate the awcTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the awcTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization.
1.3.6.1.4.1.522.3.12.2.11TruthValueread-writemandatory
awcFtEnableMacAuthServer
OBJECT-TYPE
If true, the system will contact a AAA server for retrieving dot1dStaticTable information for new forwarding table entries if a dot1dStaticTable entry does not already exist for the host address.
1.3.6.1.4.1.522.3.12.2.12TruthValueread-writemandatory
awcFtRogueApAlertTimeout
OBJECT-TYPE
The minimum number of minutes after a Possible Rogue status is reported about a device before another Possible Rogue status report is issued by this system about the same device.
1.3.6.1.4.1.522.3.12.2.13INTEGER (0..1440)read-writemandatory
awcFtEnableMacOrEapAuth
OBJECT-TYPE
If true, the system grants full access to those clients which have successfully completed either MAC or EAP authentication.
1.3.6.1.4.1.522.3.12.2.14TruthValueread-writemandatory
awcFtDot1dTpFdbTableEnable
OBJECT-TYPE
If true, the system will populate the dot1dTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the dot1dTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization.
1.3.6.1.4.1.522.3.12.2.15TruthValueread-writemandatory
awcFtEnableMcastMapping
OBJECT-TYPE
If true, the system will map multicast forwarding table entries to the broadcast entry. This improves speed and memory utilization. If false, the system will create an entry for each unique multicast address. This improves management statistics and allows filtering of specific multicast addresses.
1.3.6.1.4.1.522.3.12.2.16TruthValueread-writemandatory
awcFtAssocTblRefreshTime
OBJECT-TYPE
The minimum interval, in seconds, at which an access point refreshes its view of the 802.11 network topology of the entire subnet to which it is attached (its native VLAN). A shorter interval results in more reliable packet forwarding, at the cost of additional network and AP memory overhead. A value of 0 disables background 802.11 topology updates.
1.3.6.1.4.1.522.3.12.2.17Gauge (0..86400)read-writemandatory
awcTpFdbTable
OBJECT-TYPE
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function for maintaining statistics about each entry.
1.3.6.1.4.1.522.3.12.3not-accessiblemandatory
awcTpFdbEntry
OBJECT-TYPE
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.3.1not-accessiblemandatory
awcTpFdbAddress
OBJECT-TYPE
A MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.3.1.1MacAddressread-onlymandatory
awcTpFdbClassID
OBJECT-TYPE
Observed general 802.11 classification of the entry.
1.3.6.1.4.1.522.3.12.3.1.2AwcTpFdbClassIDread-onlymandatory
awcTpFdbSrcPktsImmed
OBJECT-TYPE
Number of observed packets for which this entry was the source.
1.3.6.1.4.1.522.3.12.3.1.3Counterread-onlymandatory
awcTpFdbSrcOctetsImmed
OBJECT-TYPE
Number of observed octets for which this entry was the source.
1.3.6.1.4.1.522.3.12.3.1.4Counterread-onlymandatory
awcTpFdbSrcErrorPktsImmed
OBJECT-TYPE
Number of observed error packets for which this entry was the source.
1.3.6.1.4.1.522.3.12.3.1.5Counterread-onlymandatory
awcTpFdbSrcErrorOctetsImmed
OBJECT-TYPE
Number of observed error octets for which this entry was the source.
1.3.6.1.4.1.522.3.12.3.1.6Counterread-onlymandatory
awcTpFdbDestPktsImmed
OBJECT-TYPE
Number of observed packets for which this entry was the destination.
1.3.6.1.4.1.522.3.12.3.1.7Counterread-onlymandatory
awcTpFdbDestOctetsImmed
OBJECT-TYPE
Number of observed octets for which this entry was the destination.
1.3.6.1.4.1.522.3.12.3.1.8Counterread-onlymandatory
awcTpFdbDestErrorPktsImmed
OBJECT-TYPE
Number of observed error packets for which this entry was the destination. This count includes awcTpFdbDestMaxRetryErrorsImmed.
1.3.6.1.4.1.522.3.12.3.1.9Counterread-onlymandatory
awcTpFdbDestErrorOctetsImmed
OBJECT-TYPE
Number of observed error octets for which this entry was the destination.
1.3.6.1.4.1.522.3.12.3.1.10Counterread-onlymandatory
awcTpFdbDestMaxRetryErrorsImmed
OBJECT-TYPE
Number of observed max-retry error packets for which this entry was the destination.
1.3.6.1.4.1.522.3.12.3.1.11Counterread-onlymandatory
awcTpFdbIPv4Addr
OBJECT-TYPE
Observed IPv4 network address of the entry.
1.3.6.1.4.1.522.3.12.3.1.16IpAddressread-onlymandatory
awcTpFdbDdpTable
OBJECT-TYPE
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only Aironet-specific information about each entry.
1.3.6.1.4.1.522.3.12.4not-accessiblemandatory
awcTpFdbDdpEntry
OBJECT-TYPE
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.4.1not-accessiblemandatory
awcTpFdbDdpAddress
OBJECT-TYPE
A MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.4.1.1MacAddressread-onlymandatory
awcTpFdbDdpSysName
OBJECT-TYPE
The Aironet DDP System Name of the entry.
1.3.6.1.4.1.522.3.12.4.1.2DisplayString (SIZE(0..255))read-onlymandatory
awcTpFdbDdpProdDevID
OBJECT-TYPE
The Aironet DDP Product Device ID of the entry.
1.3.6.1.4.1.522.3.12.4.1.3AwcDdpProdDevIDread-onlymandatory
awcTpFdbDdpRadioDevID
OBJECT-TYPE
The Aironet DDP Radio Device ID of the entry.
1.3.6.1.4.1.522.3.12.4.1.4AwcDdpRadioDevIDread-onlymandatory
awcTpFdbDdpSwVerMajor
OBJECT-TYPE
The Aironet DDP Major Software Version Number of the entry. If unknown, the value 0 is returned.
1.3.6.1.4.1.522.3.12.4.1.5INTEGER (0..255)read-onlymandatory
awcTpFdbDdpSwVerMinor
OBJECT-TYPE
The Aironet DDP Minor Software Version Number of the entry.
1.3.6.1.4.1.522.3.12.4.1.6INTEGER (0..255)read-onlymandatory
awcTpFdbDdpSwVerBeta
OBJECT-TYPE
The Aironet DDP Beta Software Version Number of the entry. This number is always 0 for officially-released software.
1.3.6.1.4.1.522.3.12.4.1.7INTEGER (0..255)read-onlymandatory
awcTpFdbDdpUptime
OBJECT-TYPE
The time in seconds that the entry has been operational.
1.3.6.1.4.1.522.3.12.4.1.8Gaugeread-onlymandatory
awcTpFdbDdpNumAnnounceSent
OBJECT-TYPE
The number of times the entry itself believes that it has issued some form of Aironet DDP Presense Announcement. If this field decreases, the entry has probably been reset.
1.3.6.1.4.1.522.3.12.4.1.9Gaugeread-onlymandatory
awcTpFdbDdpNumAssociated
OBJECT-TYPE
The number of Stations currently Associated with the entry.
1.3.6.1.4.1.522.3.12.4.1.10INTEGER (0..2007)read-onlymandatory
awcTpFdbDdpLoad
OBJECT-TYPE
An approximation of the percentage of offered vs. theoretically-available load on the host's radio interface.
1.3.6.1.4.1.522.3.12.4.1.11INTEGER (0..100)read-onlymandatory
awcTpFdbDdpDistFromDS
OBJECT-TYPE
The Bridging Distance or Number of Hops between the entry and the backbone Distribution System (DS). If 0, the entry is directly connected to the DS.
1.3.6.1.4.1.522.3.12.4.1.12INTEGER (0..255)read-onlymandatory
awcDot11TpFdbTable
OBJECT-TYPE
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only 802.11-specific information about each entry.
1.3.6.1.4.1.522.3.12.5not-accessiblemandatory
awcDot11TpFdbEntry
OBJECT-TYPE
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.5.1not-accessiblemandatory
awcDot11TpFdbAddress
OBJECT-TYPE
A MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.5.1.1MacAddressread-onlymandatory
awcDot11TpFdbAID
OBJECT-TYPE
AID with which the Station is associated with this system, or 2008 if the Station is not currently known to be associated. If the entry is multicast, awcDot11TpFdbAID is 0. Note that the uplink from a Client or Repeater AP to its parent is always AID 1.
1.3.6.1.4.1.522.3.12.5.1.2Gaugeread-onlymandatory
awcDot11TpFdbClientState
OBJECT-TYPE
802.11 Service State of the Station.
1.3.6.1.4.1.522.3.12.5.1.3AwcDot11ClientStateread-onlymandatory
awcDot11TpFdbTxShortRetries
OBJECT-TYPE
The total number of 802.11 Short Retries incurred across all packet Transmission Attempts to this Station.
1.3.6.1.4.1.522.3.12.5.1.4Counterread-onlymandatory
awcDot11TpFdbTxLongRetries
OBJECT-TYPE
The total number of 802.11 Long Retries incurred across all packet Transmission Attempts to this Station.
1.3.6.1.4.1.522.3.12.5.1.5Counterread-onlymandatory
awcDot11TpFdbLatestTxShortRetries
OBJECT-TYPE
The number of 802.11 Short Retries incurred during the most recent packet Transmission Attempts to this Station.
1.3.6.1.4.1.522.3.12.5.1.6Counterread-onlymandatory
awcDot11TpFdbLatestTxLongRetries
OBJECT-TYPE
The number of 802.11 Long Retries incurred during the most recent packet Transmission Attempts to this Station.
1.3.6.1.4.1.522.3.12.5.1.7Counterread-onlymandatory
awcDot11TpFdbRxWEPErrors
OBJECT-TYPE
The total number of packets received from this Station which failed to be properly decrypted via the WEP security mechanism.
1.3.6.1.4.1.522.3.12.5.1.8Counterread-onlymandatory
awcDot11TpFdbLatestRxSignalStrength
OBJECT-TYPE
A device-dependent measure of the signal strength of the most recently received packet from this Station. Might be normalized or unnormalized.
1.3.6.1.4.1.522.3.12.5.1.9Gaugeread-onlymandatory
awcDot11TpFdbLatestRxSignalQuality
OBJECT-TYPE
A device-dependent measure of the signal quality of the most recently received packet from this Station.
1.3.6.1.4.1.522.3.12.5.1.10Gaugeread-onlymandatory
awcDot11TpFdbCapabilities
OBJECT-TYPE
The possible 802.11 capabilities of the Station's radio.
1.3.6.1.4.1.522.3.12.5.1.11Gaugeread-onlymandatory
awcDot11TpFdbListenInterval
OBJECT-TYPE
The number of beacon intervals across which a the Station will sleep in power-save mode, or 1 if the Station will never be in power-save mode.
1.3.6.1.4.1.522.3.12.5.1.12Gaugeread-onlymandatory
awcDot11TpFdbSupportedDataRates
OBJECT-TYPE
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 255, the lower seven bits 0..6 of which corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. If set, Bit 7 of the rate specification indicates that rate is a member of the Basic Rate Set of the access point.
1.3.6.1.4.1.522.3.12.5.1.13OCTET STRING (SIZE(1..126))read-onlymandatory
awcDot11TpFdbPreferredTxRate
OBJECT-TYPE
The transmission rate at which a packet should currently be transmitted from an AP to this Station. This rate does not carry information about whether or not the rate is in the Basic Rate Set (i.e. bit 0x80 is never set).
1.3.6.1.4.1.522.3.12.5.1.14Gaugeread-onlymandatory
awcDot11TpFdbCurrentBSS
OBJECT-TYPE
BSS to which the station is currently Associated, or 00:00:00:00:00:00 if the station's current AP is unknown.
1.3.6.1.4.1.522.3.12.5.1.15MacAddressread-onlymandatory
awcDot11TpFdbSSID
OBJECT-TYPE
If the Station is Associated to this AP, the SSID via which the Station Associated. If 0, the Station Associated via dot11DesiredSSID. If greater than 0, the Station Associated through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11TpFdbSSID. If -1, the Station is not currently Associated to this AP.
1.3.6.1.4.1.522.3.12.5.1.16INTEGER (-1..2007)read-onlymandatory
awcDot11TpFdbVlanId
OBJECT-TYPE
Numeric ID of the VLAN over which the Station is communicating. If 0, the Station is not known to be communicating over any specific VLAN.
1.3.6.1.4.1.522.3.12.5.1.17AwcVlanIdread-onlymandatory
awcDot1dTpPortTable
OBJECT-TYPE
A table that contains information about every port that is associated with this transparent bridge. This table contains information about host and protocol filtering for the port. Each entry represents a transparent bridge port on the device. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
1.3.6.1.4.1.522.3.12.6not-accessiblemandatory
awcDot1dTpPortEntry
OBJECT-TYPE
A list of filtering information for each port of a transparent bridge. This information includes packet forwarding permission for unicast and non-unicast frames and filters ID used for the filtering.
1.3.6.1.4.1.522.3.12.6.1not-accessiblemandatory
awcDot1dTpPortDefaultUcastAllowedToGoTo
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a unicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
1.3.6.1.4.1.522.3.12.6.1.1OCTET STRINGread-writemandatory
awcDot1dTpPortDefaultNUcastAllowedToGoTo
OBJECT-TYPE
The set of ports to which frames received from a specific port and destined for a multicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
1.3.6.1.4.1.522.3.12.6.1.2OCTET STRINGread-writemandatory
awcDot1dTpPortMaxNUcastPerSecond
OBJECT-TYPE
The maximum number of multicast packets allowed to be forwarded over the port each second. If 0, the number of multicasts is unlimited.
1.3.6.1.4.1.522.3.12.6.1.3Gaugeread-writemandatory
awcDot1dTpPortDefaultInEthertypeFilterId
OBJECT-TYPE
awcPfEtSetId of the Ethertype Filter Set to apply to packets received over this port. If 0, no filters are applied.
1.3.6.1.4.1.522.3.12.6.1.4Gaugeread-writemandatory
awcDot1dTpPortDefaultOutEthertypeFilterId
OBJECT-TYPE
awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
1.3.6.1.4.1.522.3.12.6.1.5Gaugeread-writemandatory
awcDot1dTpPortDefaultInIpProtoFilterId
OBJECT-TYPE
awcPfIppSetId of the IP Protocol Filter Set to apply to packets received over this port. If 0, no filters are applied.
1.3.6.1.4.1.522.3.12.6.1.6Gaugeread-writemandatory
awcDot1dTpPortDefaultOutIpProtoFilterId
OBJECT-TYPE
awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
1.3.6.1.4.1.522.3.12.6.1.7Gaugeread-writemandatory
awcDot1dTpPortDefaultInIpPortFilterId
OBJECT-TYPE
awcPfIptSetId of the IP Port Filter Set to apply to packets received over this port. If 0, no filters are applied.
1.3.6.1.4.1.522.3.12.6.1.8Gaugeread-writemandatory
awcDot1dTpPortDefaultOutIpPortFilterId
OBJECT-TYPE
awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
1.3.6.1.4.1.522.3.12.6.1.9Gaugeread-writemandatory
awcTpFdbAlertTable
OBJECT-TYPE
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only packet-trace alert statistics. Each entry is indexed by a MAC address in the packet forwarding. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
1.3.6.1.4.1.522.3.12.7not-accessiblemandatory
awcTpFdbAlertEntry
OBJECT-TYPE
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.7.1not-accessiblemandatory
awcTpFdbAlertAddress
OBJECT-TYPE
A MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.522.3.12.7.1.1MacAddressread-onlymandatory
awcTpFdbFromAlertSrcPktsImmed
OBJECT-TYPE
The total number of packets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table.
1.3.6.1.4.1.522.3.12.7.1.2Counterread-onlymandatory
awcTpFdbFromAlertSrcOctetsImmed
OBJECT-TYPE
The total number of octets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table.
1.3.6.1.4.1.522.3.12.7.1.3Counterread-onlymandatory
awcTpFdbToAlertDestPktsImmed
OBJECT-TYPE
The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table.
1.3.6.1.4.1.522.3.12.7.1.4Counterread-onlymandatory
awcTpFdbToAlertDestOctetsImmed
OBJECT-TYPE
The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table.
1.3.6.1.4.1.522.3.12.7.1.5Counterread-onlymandatory
awcTpFdbAlertSentAlertTypePktsImmed
OBJECT-TYPE
The total number of packets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
1.3.6.1.4.1.522.3.12.7.1.6Counterread-onlymandatory
awcTpFdbAlertSentAlertTypeOctetsImmed
OBJECT-TYPE
The total number of octets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
1.3.6.1.4.1.522.3.12.7.1.7Counterread-onlymandatory
awcTpFdbAlertRcvdAlertTypePktsImmed
OBJECT-TYPE
The total number of packets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
1.3.6.1.4.1.522.3.12.7.1.8Counterread-onlymandatory
awcTpFdbAlertRcvdAlertTypeOctetsImmed
OBJECT-TYPE
The total number of octets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
1.3.6.1.4.1.522.3.12.7.1.9Counterread-onlymandatory
awcRipConfig
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.13
awcEventLog
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.14
awcEventOffsetGMT
OBJECT-TYPE
The current offset from GMT in minutes.
1.3.6.1.4.1.522.3.14.1INTEGER (-720..720)read-writemandatory
awcEventUseDaylightSavingsTime
OBJECT-TYPE
If true, daylight savings time is used.
1.3.6.1.4.1.522.3.14.2TruthValueread-writemandatory
awcEventTimestampGMT
OBJECT-TYPE
GMT Time, in seconds since January 1, 1970, when the system wall-clock time was last set.
1.3.6.1.4.1.522.3.14.3INTEGERread-writemandatory
awcEventUptimeModifiedGMT
OBJECT-TYPE
System uptime, in seconds, when the system wall-clock time was last set.
1.3.6.1.4.1.522.3.14.4INTEGERread-onlymandatory
awcEventDisplayWallClockTime
OBJECT-TYPE
If true, time display on the system's web pages and console is in wall-clock time. If false, time display is in system uptime.
1.3.6.1.4.1.522.3.14.5TruthValueread-writemandatory
awcEventDisplayUptimeAscending
OBJECT-TYPE
If true, time display in system uptime is measured from the time the system boots, forward. If false, time display in measured from the current time backwards.
1.3.6.1.4.1.522.3.14.6TruthValueread-writemandatory
awcEventDetailDefault
OBJECT-TYPE
Detail level at which, by default, events are displayed. General detail level classifications are: 8 - no display at all 16 - sparse detail 24 - normal detail 32 - verbose detail 40 - exhaustive detail
1.3.6.1.4.1.522.3.14.7INTEGERread-writemandatory
awcEventSeverityDispConsole
OBJECT-TYPE
If an event has a severity level greater than or equal to awcEventSeverityDispConsole, it is displayed on the console shortly after it occurs.
1.3.6.1.4.1.522.3.14.8AwcEventSeverityread-writemandatory
awcEventSeverityDispHtmlGUI
OBJECT-TYPE
If an event has a severity level greater than or equal to awcEventSeverityDispHtmlGUI, it is displayed on the the Event Log GUI web pages.
1.3.6.1.4.1.522.3.14.9AwcEventSeverityread-writemandatory
awcEventSeverityDispHtmlConsole
OBJECT-TYPE
If an event has a severity level greater than or equal to awcEventSeverityDispHtmlConsole, it is displayed on the the Event Log console browser pages.
1.3.6.1.4.1.522.3.14.10AwcEventSeverityread-writemandatory
awcEventAlertSNMP
OBJECT-TYPE
If true, events of a severity with Disposition set to notify will generate an SNMP trap.
1.3.6.1.4.1.522.3.14.11TruthValueread-writemandatory
awcEventAlertSyslog
OBJECT-TYPE
If true, events of a severity with Disposition set to notify will generate a sysLog message.
1.3.6.1.4.1.522.3.14.12TruthValueread-writemandatory
awcEventStatistics
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.14.14
awcEventCntSeverityNULL
OBJECT-TYPE
NULL message counter.
1.3.6.1.4.1.522.3.14.14.1Counterread-onlymandatory
awcEventCntSeveritySilent
OBJECT-TYPE
Silent message counter.
1.3.6.1.4.1.522.3.14.14.2Counterread-onlymandatory
awcEventCntSeveritySystemFatal
OBJECT-TYPE
Fatal system message counter.
1.3.6.1.4.1.522.3.14.14.3Counterread-onlymandatory
awcEventCntSeverityProtocolFatal
OBJECT-TYPE
Fatal Protocol message counter.
1.3.6.1.4.1.522.3.14.14.4Counterread-onlymandatory
awcEventCntSeverityPortFatal
OBJECT-TYPE
Fatal Port message counter.
1.3.6.1.4.1.522.3.14.14.5Counterread-onlymandatory
awcEventCntSeveritySystemAlert
OBJECT-TYPE
System Alert message counter.
1.3.6.1.4.1.522.3.14.14.6Counterread-onlymandatory
awcEventCntSeverityProtocolAlert
OBJECT-TYPE
Protocol Alert message counter.
1.3.6.1.4.1.522.3.14.14.7Counterread-onlymandatory
awcEventCntSeverityPortAlert
OBJECT-TYPE
Port Alert message counter.
1.3.6.1.4.1.522.3.14.14.8Counterread-onlymandatory
awcEventCntSeverityExternalAlert
OBJECT-TYPE
External Alert message counter.
1.3.6.1.4.1.522.3.14.14.9Counterread-onlymandatory
awcEventCntSeveritySystemWarning
OBJECT-TYPE
System Warning message counter.
1.3.6.1.4.1.522.3.14.14.10Counterread-onlymandatory
awcEventCntSeverityProtocolWarning
OBJECT-TYPE
Protocol Warning message counter.
1.3.6.1.4.1.522.3.14.14.11Counterread-onlymandatory
awcEventCntSeverityPortWarning
OBJECT-TYPE
Port Warning message counter.
1.3.6.1.4.1.522.3.14.14.12Counterread-onlymandatory
awcEventCntSeverityExternalWarning
OBJECT-TYPE
External Warning message counter.
1.3.6.1.4.1.522.3.14.14.13Counterread-onlymandatory
awcEventCntSeveritySystemInfo
OBJECT-TYPE
System Info message counter.
1.3.6.1.4.1.522.3.14.14.14Counterread-onlymandatory
awcEventCntSeverityProtocolInfo
OBJECT-TYPE
Protocol Info message counter.
1.3.6.1.4.1.522.3.14.14.15Counterread-onlymandatory
awcEventCntSeverityPortInfo
OBJECT-TYPE
Port Info message counter.
1.3.6.1.4.1.522.3.14.14.16Counterread-onlymandatory
awcEventCntSeverityExternalInfo
OBJECT-TYPE
External Info message counter.
1.3.6.1.4.1.522.3.14.14.17Counterread-onlymandatory
awcEventDisposition
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.14.15
awcEventDispSeverityNULL
OBJECT-TYPE
NULL message disposition.
1.3.6.1.4.1.522.3.14.15.1AwcEventDispositionread-writemandatory
awcEventDispSeveritySilent
OBJECT-TYPE
Silent message disposition.
1.3.6.1.4.1.522.3.14.15.2AwcEventDispositionread-writemandatory
awcEventDispSeveritySystemFatal
OBJECT-TYPE
Fatal system message disposition.
1.3.6.1.4.1.522.3.14.15.3AwcEventDispositionread-writemandatory
awcEventDispSeverityProtocolFatal
OBJECT-TYPE
Fatal Protocol message disposition.
1.3.6.1.4.1.522.3.14.15.4AwcEventDispositionread-writemandatory
awcEventDispSeverityPortFatal
OBJECT-TYPE
Fatal Port message disposition.
1.3.6.1.4.1.522.3.14.15.5AwcEventDispositionread-writemandatory
awcEventDispSeveritySystemAlert
OBJECT-TYPE
System Alert message disposition.
1.3.6.1.4.1.522.3.14.15.6AwcEventDispositionread-writemandatory
awcEventDispSeverityProtocolAlert
OBJECT-TYPE
Protocol Alert message disposition.
1.3.6.1.4.1.522.3.14.15.7AwcEventDispositionread-writemandatory
awcEventDispSeverityPortAlert
OBJECT-TYPE
Port Alert message disposition.
1.3.6.1.4.1.522.3.14.15.8AwcEventDispositionread-writemandatory
awcEventDispSeverityExternalAlert
OBJECT-TYPE
External Alert message disposition.
1.3.6.1.4.1.522.3.14.15.9AwcEventDispositionread-writemandatory
awcEventDispSeveritySystemWarning
OBJECT-TYPE
System Warning message disposition.
1.3.6.1.4.1.522.3.14.15.10AwcEventDispositionread-writemandatory
awcEventDispSeverityProtocolWarning
OBJECT-TYPE
Protocol Warning message disposition.
1.3.6.1.4.1.522.3.14.15.11AwcEventDispositionread-writemandatory
awcEventDispSeverityPortWarning
OBJECT-TYPE
Port Warning message disposition.
1.3.6.1.4.1.522.3.14.15.12AwcEventDispositionread-writemandatory
awcEventDispSeverityExternalWarning
OBJECT-TYPE
External Warning message disposition.
1.3.6.1.4.1.522.3.14.15.13AwcEventDispositionread-writemandatory
awcEventDispSeveritySystemInfo
OBJECT-TYPE
System Info message disposition.
1.3.6.1.4.1.522.3.14.15.14AwcEventDispositionread-writemandatory
awcEventDispSeverityProtocolInfo
OBJECT-TYPE
Protocol Info message disposition.
1.3.6.1.4.1.522.3.14.15.15AwcEventDispositionread-writemandatory
awcEventDispSeverityPortInfo
OBJECT-TYPE
Port Info message disposition.
1.3.6.1.4.1.522.3.14.15.16AwcEventDispositionread-writemandatory
awcEventDispSeverityExternalInfo
OBJECT-TYPE
External Info message disposition.
1.3.6.1.4.1.522.3.14.15.17AwcEventDispositionread-writemandatory
awcEventSyslogAddr
OBJECT-TYPE
The destination of a sysLog message. This address must be numeric or DNS resolvable. Max. string length is 128 octets.
1.3.6.1.4.1.522.3.14.16DisplayString (SIZE(0..128))read-writemandatory
awcEventSyslogFacility
OBJECT-TYPE
The facility number encoded within a sysLog message.
1.3.6.1.4.1.522.3.14.17INTEGER (0..8191)read-writemandatory
awcEventTraceStationSeverity
OBJECT-TYPE
Severity at which all Detailed Packet Trace events shall be handled.
1.3.6.1.4.1.522.3.14.20AwcEventSeverityread-writemandatory
awcEventTraceLogSize
OBJECT-TYPE
Size in octets of the system Detailed Event Trace Buffer. Note that this buffer is statically allocated at system initialization time. Changing the size of the buffer requires a system reboot.
1.3.6.1.4.1.522.3.14.21Gauge (0..8388608)read-writemandatory
awcEventTracePacketLen
OBJECT-TYPE
Maximum size in octets of each Packet Trace Event recorded in the Detailed Event Trace Buffer.
1.3.6.1.4.1.522.3.14.22Gauge (0..2312)read-writemandatory
awcEventTable
OBJECT-TYPE
SNMP access to Event Log table.
1.3.6.1.4.1.522.3.14.23not-accessiblemandatory
awcEventEntry
OBJECT-TYPE
An entry in awcEventTable.
1.3.6.1.4.1.522.3.14.23.1not-accessiblemandatory
awcEventID
OBJECT-TYPE
System-unique identifier of the event.
1.3.6.1.4.1.522.3.14.23.1.1Gaugeread-onlymandatory
awcEventTime
OBJECT-TYPE
System time at which the event occurred.
1.3.6.1.4.1.522.3.14.23.1.2DisplayStringread-onlymandatory
awcEventSeverity
OBJECT-TYPE
Severity of the event.
1.3.6.1.4.1.522.3.14.23.1.3AwcEventSeverityread-onlymandatory
awcEventDescription
OBJECT-TYPE
Detailed description of the event.
1.3.6.1.4.1.522.3.14.23.1.4DisplayStringread-onlymandatory
awcEventType
OBJECT-TYPE
Specific type of the event. The type is unique for each test condition which can result in event generation.
1.3.6.1.4.1.522.3.14.23.1.5DisplayStringread-onlymandatory
awcEventUseCiscoFormat
OBJECT-TYPE
If true, the system will generate syslog messages using Cisco standard EMBLEM- compliant format. If false, syslog will use legacy Aironet format.
1.3.6.1.4.1.522.3.14.25TruthValueread-writemandatory
awcDot11AuthenticateFailDisposition
OBJECT-TYPE
Specifies how standard IEEE trap dot11AuthenticateFail is handled on the system.
1.3.6.1.4.1.522.3.14.26AwcDot11EventDispositionread-writemandatory
awcDot11DeauthenticateDisposition
OBJECT-TYPE
Specifies how standard IEEE 802.11 trap dot11Deauthenticate is handled on the system.
1.3.6.1.4.1.522.3.14.27AwcDot11EventDispositionread-writemandatory
awcDot11DisassociateDisposition
OBJECT-TYPE
Specifies how standard IEEE 802.11 trap dot11Disassociate is handled on the system.
1.3.6.1.4.1.522.3.14.28AwcDot11EventDispositionread-writemandatory
awcEtherMIB
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.15
awcEtherIfSpeedSelect
OBJECT-TYPE
Requested Ethernet interface speed and duplex.
1.3.6.1.4.1.522.3.15.1INTEGER {tenBaseT(3), oneHundredBaseT(5), tenBaseTfull(6), oneHundredBaseTfull(7), autoDetect(8)}read-writemandatory
awcEtherDuplex
OBJECT-TYPE
Actual Ethernet interface duplex, after any line negotiation has taken place.
1.3.6.1.4.1.522.3.15.5INTEGER {half(1), full(2)}read-onlymandatory
awcEtherCamSize
OBJECT-TYPE
Number of entries in the hardware Content Addressible Memory MAC address filter available to the Ethernet controller.
1.3.6.1.4.1.522.3.15.7Gaugeread-onlymandatory
awcEtherEnableSwCam
OBJECT-TYPE
If true, the Ethernet driver makes use of a Software Content Addressible Memory when making packet-forwarding decisions. When true, forwarding decisions are much faster, but network statistics collection is much coarser. If false, all packet-forwarding decisions are made by the higher-level packet-bridging logic.
1.3.6.1.4.1.522.3.15.8TruthValueread-writemandatory
awcEtherForcePortUnblock
OBJECT-TYPE
If true, the Ethernet port has dot1dStpPortState forced to forwarding even when the Spanning Tree Protocol is not enabled. This provides rapid port re-establishment at the potential cost of not detecting network topology loops involving the Ethernet and other network interfaces such as the radio. If false, the Ethernet port is blocked whenever there exists the potential for a network topology loop and the Spanning Tree Protocol is not enabled to guard against such loops.
1.3.6.1.4.1.522.3.15.9TruthValueread-writemandatory
awcEtherLostEthernetSeconds
OBJECT-TYPE
Number of seconds the system must detect loss of backbone connectivity (i.e. loss of Ethernet link and no active trunks available on any of the radios) before taking the action specified by awcEtherLostEthernetAction.
1.3.6.1.4.1.522.3.15.10INTEGER (1..10000)read-writemandatory
awcEtherLostEthernetAction
OBJECT-TYPE
Action taken by the system when a loss of backbone connectivity condition occurs for a period of time longer than awcEtherLostEthernetSeconds.
1.3.6.1.4.1.522.3.15.11INTEGER {noAction(1), switchRepeater(2), radioOff(3), restrictSSID(4)}read-writemandatory
awcEtherLostEthernetSSID
OBJECT-TYPE
The single SSID index required by the system if awcEtherLostEthernetAction is restrictSSID and backbone connectivity is lost for a period of time longer than awcEtherLostEthernetSeconds. If 0, only Association to dot11DesiredSSID is allowed. If non-0, only Association to the auxiliary SSID with the corresponding awcDot11AuxSSIDIndex is allowed.
1.3.6.1.4.1.522.3.15.12Gaugeread-writemandatory
awcPolicyGroups
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.16
awcPolGrpTable
OBJECT-TYPE
Table of named groups of related protocol filters
1.3.6.1.4.1.522.3.16.1not-accessiblemandatory
awcPolGrpEntry
OBJECT-TYPE
An entry in awcPolGrpTable.
1.3.6.1.4.1.522.3.16.1.1not-accessiblemandatory
awcPolGrpId
OBJECT-TYPE
Numeric identifier of the Policy Group.
1.3.6.1.4.1.522.3.16.1.1.1Gauge (1..1023)not-accessiblemandatory
awcPolGrpName
OBJECT-TYPE
Descriptive name of the Policy Group. Max. string length is 64 octets.
1.3.6.1.4.1.522.3.16.1.1.2DisplayString (SIZE(0..64))read-writemandatory
awcPolGrpStatus
OBJECT-TYPE
Row status of the entire Policy Group.
1.3.6.1.4.1.522.3.16.1.1.3RowStatusread-writemandatory
awcPolGrpInEthertypeFilterId
OBJECT-TYPE
awcPfEtSetId of the Ethertype Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
1.3.6.1.4.1.522.3.16.1.1.4Gaugeread-writemandatory
awcPolGrpOutEthertypeFilterId
OBJECT-TYPE
awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
1.3.6.1.4.1.522.3.16.1.1.5Gaugeread-writemandatory
awcPolGrpInIpProtoFilterId
OBJECT-TYPE
awcPfIppSetId of the IP Protocol Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
1.3.6.1.4.1.522.3.16.1.1.6Gaugeread-writemandatory
awcPolGrpOutIpProtoFilterId
OBJECT-TYPE
awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
1.3.6.1.4.1.522.3.16.1.1.7Gaugeread-writemandatory
awcPolGrpInIpPortFilterId
OBJECT-TYPE
awcPfIptSetId of the IP Port Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
1.3.6.1.4.1.522.3.16.1.1.8Gaugeread-writemandatory
awcPolGrpOutIpPortFilterId
OBJECT-TYPE
awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
1.3.6.1.4.1.522.3.16.1.1.9Gaugeread-writemandatory
awcDscpToCosMapEnable
OBJECT-TYPE
If true, IP packets which are not already classified with a non-default Class of Service (CoS) can be classified by reference to their Differentiated Services Code-Point (DSCP) value. If false, unclassified IP packets are not subject to DSCP classification.
1.3.6.1.4.1.522.3.16.2TruthValueread-writemandatory
awcDscpToCosMapTable
OBJECT-TYPE
This (conceptual) table to statically map Differentiated Services Code-Point (DSCP) values to corresponding Class of Service (CoS) values.
1.3.6.1.4.1.522.3.16.3not-accessiblemandatory
awcDscpToCosMapEntry
OBJECT-TYPE
An Entry (conceptual row) in the Aironet DSCP To CoS mapping table to statically map a Differentiated Services Code-Point (DSCP) value to corresponding Class of Service (CoS) value.
1.3.6.1.4.1.522.3.16.3.1not-accessiblemandatory
awcDscpToCosMapDscp
OBJECT-TYPE
The auxiliary variable used to identify instances of the columnar objects in the Aironet Differentiated Services Code-Point (DSCP) to Class of Service (CoS) Mapping Table. This variable directly corresponds to a Differentiated Services Code-Point, plus 1. The value may be used for marking a traffic stream.
1.3.6.1.4.1.522.3.16.3.1.1INTEGER (1..64)not-accessiblemandatory
awcDscpToCosMapCos
OBJECT-TYPE
A value of Class of Service (CoS) mapped to the DSCP value awcDscpToCosMapDscp. This object corresponds directly to the 802.1D traffic category ID, plus 1. The matching values are therefore in the range 1 through 8. The value 0 indicates that no matching CoS is configured for the corresponding awcDscpToCosMapDscp.
1.3.6.1.4.1.522.3.16.3.1.2INTEGER (0..8)read-writemandatory
awcDdpIAPP
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.17
awcIappMcastIpAddr
OBJECT-TYPE
Multicast IP network address over which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 224.0.1.40.
1.3.6.1.4.1.522.3.17.1IpAddressread-writemandatory
awcIappPort
OBJECT-TYPE
IP port identifier through which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 2887.
1.3.6.1.4.1.522.3.17.2INTEGER (1..65535)read-writemandatory
awcP802dot1XVersion
OBJECT-TYPE
Version of the 802.1X Protocol specification which the AP will apply for incoming and outgoing EAPOL traffic. Versions with 'd' designators are draft specifications. The 802.1x-2001 standard is the same as draft 10.
1.3.6.1.4.1.522.3.17.100INTEGER {d7(7), d8(8), d10(10)}read-writemandatory
awcHotStandby
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.18
awcHotStandbyMACAddr
OBJECT-TYPE
The MAC address of the target unit which is being monitored.
1.3.6.1.4.1.522.3.18.1MacAddressread-writemandatory
awcHotStandbyPollingFrequency
OBJECT-TYPE
The frequency (in seconds) that the monitored target unit is being polled for testing its health.
1.3.6.1.4.1.522.3.18.2INTEGER (1..30)read-writemandatory
awcHotStandbyPollingTimeOut
OBJECT-TYPE
The total time (in seconds) that the monitoring unit can tolerate the failure at polling the monitored target unit. After this duration, one more failure of the polling will trigger the standby unit to take the role of monitored unit.
1.3.6.1.4.1.522.3.18.3INTEGER (1..600)read-writemandatory
awcHotStandbyInHotStandby
OBJECT-TYPE
If true, the current unit is in its monitoring mode, i.e., if the unit is or will be a hot standby device.
1.3.6.1.4.1.522.3.18.4TruthValueread-writemandatory
awcHotStandbyState
OBJECT-TYPE
The current state, e.g., running, stopped, ... of the hotstandby.
1.3.6.1.4.1.522.3.18.5AwcHotStandbyStateread-onlymandatory
awcHotStandbyStatus
OBJECT-TYPE
The current stateus, e.g., error, OK, ... of the hotstandby.
1.3.6.1.4.1.522.3.18.6AwcHotStandbyStatusread-onlymandatory
awcAaa
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.19
awcAaaServerTable
OBJECT-TYPE
This table provides information of AAA servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
1.3.6.1.4.1.522.3.19.1not-accessiblemandatory
awcAaaServerEntry
OBJECT-TYPE
An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and authentication mechanisms supported.
1.3.6.1.4.1.522.3.19.1.1not-accessiblemandatory
awcAaaServerPriority
OBJECT-TYPE
The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups.
1.3.6.1.4.1.522.3.19.1.1.1INTEGER (1..4)read-onlymandatory
awcAaaServerProtocol
OBJECT-TYPE
The protocol used to communicate with the AAA server.
1.3.6.1.4.1.522.3.19.1.1.2INTEGER {radius(1), tacacsPlus(2)}read-writemandatory
awcAaaServerName
OBJECT-TYPE
The DNS-resolvable name or numeric IP address of the AAA server.
1.3.6.1.4.1.522.3.19.1.1.3DisplayStringread-writemandatory
awcAaaServerPort
OBJECT-TYPE
The IP port number of the AAA server.
1.3.6.1.4.1.522.3.19.1.1.4Gaugeread-writemandatory
awcAaaServerTimeout
OBJECT-TYPE
The amount of time (in seconds) that an Access Point should wait for a response from the AAA server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAaaServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the AAA server are connected through a low-speed network and the awcAaaServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged requests that have not yet reached the server
1.3.6.1.4.1.522.3.19.1.1.5Gaugeread-writemandatory
awcAaaClientName
OBJECT-TYPE
The name the Access Point uses to identify itself when acting as the supplicant.
1.3.6.1.4.1.522.3.19.1.1.6DisplayStringread-writemandatory
awcAaaServerSharedSecret
OBJECT-TYPE
The textual string shared between the AAA server and the access point, used to authenticate the messages delivered between them.
1.3.6.1.4.1.522.3.19.1.1.7DisplayStringread-writemandatory
awcAaaServer8021xCapabilityEnabled
OBJECT-TYPE
Is this server to be used for 802.1X authentication?
1.3.6.1.4.1.522.3.19.1.1.8TruthValueread-writemandatory
awcAaaServerMacAddrAuthEnabled
OBJECT-TYPE
Is this server to be used for MAC-address authentication?
1.3.6.1.4.1.522.3.19.1.1.9TruthValueread-writemandatory
awcAaaServerAdminAuthEnabled
OBJECT-TYPE
Is this server to be used for AP Admin authentication?
1.3.6.1.4.1.522.3.19.1.1.10TruthValueread-writemandatory
awcAaaServerMipAuthEnabled
OBJECT-TYPE
Is this server to be used for Proxy Mobile IP authentication?
1.3.6.1.4.1.522.3.19.1.1.11TruthValueread-writemandatory
awcAaaServerMaxRetransmission
OBJECT-TYPE
The maximum number of retransmission of a request. If an Access Point does not receive a response within awcAaaServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen temporarily.
1.3.6.1.4.1.522.3.19.1.1.12Gaugeread-writemandatory
awcAcctServerTable
OBJECT-TYPE
This table provides information of AAA accounting servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
1.3.6.1.4.1.522.3.19.2not-accessiblemandatory
awcAcctServerEntry
OBJECT-TYPE
An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and security mechanisms supported.
1.3.6.1.4.1.522.3.19.2.1not-accessiblemandatory
awcAcctServerPriority
OBJECT-TYPE
The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups.
1.3.6.1.4.1.522.3.19.2.1.1INTEGER (1..4)read-onlymandatory
awcAcctServerProtocol
OBJECT-TYPE
The protocol used to communicate with the AAA server.
1.3.6.1.4.1.522.3.19.2.1.2INTEGER {radius(1), tacacsPlus(2)}read-writemandatory
awcAcctServerName
OBJECT-TYPE
The DNS-resolvable name or numeric IP address of the AAA server.
1.3.6.1.4.1.522.3.19.2.1.3DisplayStringread-writemandatory
awcAcctServerPort
OBJECT-TYPE
The IP port number of the AAA server.
1.3.6.1.4.1.522.3.19.2.1.4Gaugeread-writemandatory
awcAcctServerTimeout
OBJECT-TYPE
The amount of time (in seconds) that an Access Point should wait for a response from the Accounting server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAcctServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the Accounting server are connected through a low-speed network and the awcAcctServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged accounting requests that have not yet reached the server
1.3.6.1.4.1.522.3.19.2.1.5Gaugeread-writemandatory
awcAcctServerUpdateEnable
OBJECT-TYPE
Is the Acct update to this server enabled?.
1.3.6.1.4.1.522.3.19.2.1.6TruthValueread-writemandatory
awcAcctServerUpdateDelay
OBJECT-TYPE
The amount of time (in seconds) that the Access Point should send to the AAA server an update of accounting information.
1.3.6.1.4.1.522.3.19.2.1.7Gauge (60..2592000)read-writemandatory
awcAcctClientName
OBJECT-TYPE
The name the Access Point uses to identify itself when acting as the supplicant.
1.3.6.1.4.1.522.3.19.2.1.8DisplayStringread-writemandatory
awcAcctSecureEnabled
OBJECT-TYPE
Is this server to be used for accounting with security AUTH?
1.3.6.1.4.1.522.3.19.2.1.9TruthValueread-writemandatory
awcAcctGeneralEnabled
OBJECT-TYPE
Is this server to be used for accounting without security AUTH?
1.3.6.1.4.1.522.3.19.2.1.10TruthValueread-writemandatory
awcAcctServerSharedSecret
OBJECT-TYPE
The textual string shared between the ACCT server and the access point, used to authenticate the messages delivered between them.
1.3.6.1.4.1.522.3.19.2.1.11DisplayStringread-writemandatory
awcAcctServerMaxRetransmission
OBJECT-TYPE
The maximum number of retransmissions of an accounting request. If an Access Point does not receive a response within awcAcctServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen.
1.3.6.1.4.1.522.3.19.2.1.12Gaugeread-writemandatory
awcAcctConfig
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.19.3
awcAcctEnable
OBJECT-TYPE
The boolean indicating if the accounting is enabled.
1.3.6.1.4.1.522.3.19.3.1TruthValueread-writemandatory
awcAcctStopDelayEnable
OBJECT-TYPE
The boolean indicating if the accounting stop request should be delayed before sent.
1.3.6.1.4.1.522.3.19.3.2TruthValueread-writemandatory
awcAcctStopDelayTime
OBJECT-TYPE
The duration for the AP to delay sending the STOP message if any.
1.3.6.1.4.1.522.3.19.3.3Gaugeread-writemandatory
awcAaaAuthConfig
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.19.4
awcAaaServerPrimaryReattemptPeriod
OBJECT-TYPE
While the primary authentication server serving a given authentication function is not reachable, the duration, in minutes, at which the AP should reattempt to return to its primary server serving that authentication function. A value of zero indicates that primary authentication server reattempt is disabled.
1.3.6.1.4.1.522.3.19.4.1Gaugeread-writemandatory
awcAaaServerDot1xAuthCurrent
OBJECT-TYPE
The index of the currently selected AAA server for 802.1X user authentication. A value of zero indicates that no authentication server is available to service 802.1X authentication function to this AP. The value of 1 to 4 indicates the corresponding server for 802.1X authentication.
1.3.6.1.4.1.522.3.19.4.2INTEGER (0..4)read-onlymandatory
awcAaaServerMacAddrAuthCurrent
OBJECT-TYPE
The index of the currently selected AAA server for MAC address authentication. A value of zero indicates that no authentication server is available to service MAC address authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for MAC address authentication function.
1.3.6.1.4.1.522.3.19.4.3INTEGER (0..4)read-onlymandatory
awcAaaServerAdminAuthCurrent
OBJECT-TYPE
The index of the currently selected AAA server for the Access Point administrator authentication function. A value of zero indicates that no authentication server is available to service admin login authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for the AP admin authentication function.
1.3.6.1.4.1.522.3.19.4.4INTEGER (0..4)read-onlymandatory
awcAaaServerMipAuthCurrent
OBJECT-TYPE
The index of the currently selected AAA server used to retrieve authentication data requied for Proxy Mobile registration and authentication function. A value of zero indicates that no authentication server is available for this function. The value of 1 to 4 indicates the corresponding server in use for proxy mobile IP related authentication function.
1.3.6.1.4.1.522.3.19.4.5INTEGER (0..4)read-onlymandatory
awcAaaServerServiceTypeLoginOnly
OBJECT-TYPE
This object sets the AAA service type to be sent to the AAA server. If it is 'true', the Service-Type value for all access requests is of the type 'Login'. If it is 'false', the Service-Type value for re-authentication requests is 'AuthenticationOnly'.
1.3.6.1.4.1.522.3.19.4.6TruthValueread-writemandatory
awcProtocolFilters
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.20
awcPrFltEthertypeSetTable
OBJECT-TYPE
Table of static Ethertype Filters
1.3.6.1.4.1.522.3.20.1not-accessiblemandatory
awcPrFltEthertypeSetEntry
OBJECT-TYPE
An entry in awcPrFltEthertypeTable.
1.3.6.1.4.1.522.3.20.1.1not-accessiblemandatory
awcPfEtSetId
OBJECT-TYPE
Numeric identifier of the static Ethertype filters set.
1.3.6.1.4.1.522.3.20.1.1.1Gaugeread-onlymandatory
awcPfEtSetName
OBJECT-TYPE
Descriptive name of the static Ethertype filters set. Max. string length is 64 octets.
1.3.6.1.4.1.522.3.20.1.1.2DisplayString (SIZE(0..64))read-writemandatory
awcPfEtDefaultDisposition
OBJECT-TYPE
Default packet disposition of the static Ethertype filters set.
1.3.6.1.4.1.522.3.20.1.1.3AwcPfDispositionread-writemandatory
awcPfEtDefaultUcastTimeToLive
OBJECT-TYPE
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
1.3.6.1.4.1.522.3.20.1.1.4Gaugeread-writemandatory
awcPfEtDefaultNUcastTimeToLive
OBJECT-TYPE
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
1.3.6.1.4.1.522.3.20.1.1.5Gaugeread-writemandatory
awcPfEtSetStatus
OBJECT-TYPE
Row status of the entire static Ethertype filters set.
1.3.6.1.4.1.522.3.20.1.1.6RowStatusread-writemandatory
awcPrFltEthertypeTable
OBJECT-TYPE
Table of individual static Ethertype filters.
1.3.6.1.4.1.522.3.20.2not-accessiblemandatory
awcPrFltEthertypeEntry
OBJECT-TYPE
An entry in the individual static Ethertype filter table.
1.3.6.1.4.1.522.3.20.2.1not-accessiblemandatory
awcPfEtEthertype
OBJECT-TYPE
Ethertype (protocol) to which this individual static filter applies
1.3.6.1.4.1.522.3.20.2.1.1INTEGER (1..255 | 1501..65535)read-onlymandatory
awcPfEtDisposition
OBJECT-TYPE
Designation of how the protocol should be handled.
1.3.6.1.4.1.522.3.20.2.1.2AwcPfDispositionread-writemandatory
awcPfEtUserPriority
OBJECT-TYPE
Designation of the priority assigned to packets of the Ethertype.
1.3.6.1.4.1.522.3.20.2.1.3AwcPfPriorityread-writemandatory
awcPfEtUcastTimeToLive
OBJECT-TYPE
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
1.3.6.1.4.1.522.3.20.2.1.4Gaugeread-writemandatory
awcPfEtNUcastTimeToLive
OBJECT-TYPE
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
1.3.6.1.4.1.522.3.20.2.1.5Gaugeread-writemandatory
awcPfEtAlert
OBJECT-TYPE
Should an alert be registered when a packet of this Ethertype is observed?
1.3.6.1.4.1.522.3.20.2.1.6TruthValueread-writemandatory
awcPfEtStatus
OBJECT-TYPE
Row status of the individual static Ethertype filters.
1.3.6.1.4.1.522.3.20.2.1.7RowStatusread-writemandatory
awcPrFltIpProtocolSetTable
OBJECT-TYPE
Table of static IP Protocol Filters
1.3.6.1.4.1.522.3.20.3not-accessiblemandatory
awcPrFltIpProtocolSetEntry
OBJECT-TYPE
An entry in awcPrFltIpProtocolTable.
1.3.6.1.4.1.522.3.20.3.1not-accessiblemandatory
awcPfIppSetId
OBJECT-TYPE
Numeric identifier of the static IP Protocol filters set.
1.3.6.1.4.1.522.3.20.3.1.1Gaugeread-onlymandatory
awcPfIppSetName
OBJECT-TYPE
Descriptive name of the static IP Protocol filters set. Max. string length is 64 octets.
1.3.6.1.4.1.522.3.20.3.1.2DisplayString (SIZE(0..64))read-writemandatory
awcPfIppDefaultDisposition
OBJECT-TYPE
Default packet disposition of the static IP Protocol filters set.
1.3.6.1.4.1.522.3.20.3.1.3AwcPfDispositionread-writemandatory
awcPfIppDefaultUcastTimeToLive
OBJECT-TYPE
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
1.3.6.1.4.1.522.3.20.3.1.4Gaugeread-writemandatory
awcPfIppDefaultNUcastTimeToLive
OBJECT-TYPE
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
1.3.6.1.4.1.522.3.20.3.1.5Gaugeread-writemandatory
awcPfIppSetStatus
OBJECT-TYPE
Row status of the entire static IP Protocol filters set.
1.3.6.1.4.1.522.3.20.3.1.6RowStatusread-writemandatory
awcPrFltIpProtocolTable
OBJECT-TYPE
Table of individual static IP Protocol filters.
1.3.6.1.4.1.522.3.20.4not-accessiblemandatory
awcPrFltIpProtocolEntry
OBJECT-TYPE
An entry in the individual static IP Protocol filter table.
1.3.6.1.4.1.522.3.20.4.1not-accessiblemandatory
awcPfIppIpProtocol
OBJECT-TYPE
IP Protocol to which this individual static filter applies
1.3.6.1.4.1.522.3.20.4.1.1INTEGER (0..255)read-onlymandatory
awcPfIppDisposition
OBJECT-TYPE
Designation of how the protocol should be handled.
1.3.6.1.4.1.522.3.20.4.1.2AwcPfDispositionread-writemandatory
awcPfIppUserPriority
OBJECT-TYPE
Designation of the priority assigned to packets of the IP Protocol.
1.3.6.1.4.1.522.3.20.4.1.3AwcPfPriorityread-writemandatory
awcPfIppUcastTimeToLive
OBJECT-TYPE
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
1.3.6.1.4.1.522.3.20.4.1.4Gaugeread-writemandatory
awcPfIppNUcastTimeToLive
OBJECT-TYPE
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
1.3.6.1.4.1.522.3.20.4.1.5Gaugeread-writemandatory
awcPfIppAlert
OBJECT-TYPE
Should an alert be registered when a packet of this IP Protocol is observed?
1.3.6.1.4.1.522.3.20.4.1.6TruthValueread-writemandatory
awcPfIppStatus
OBJECT-TYPE
Row status of the individual static IP Protocol filters.
1.3.6.1.4.1.522.3.20.4.1.7RowStatusread-writemandatory
awcPrFltIpPortSetTable
OBJECT-TYPE
Table of static IP Port Filters
1.3.6.1.4.1.522.3.20.5not-accessiblemandatory
awcPrFltIpPortSetEntry
OBJECT-TYPE
An entry in awcPrFltIpPortTable.
1.3.6.1.4.1.522.3.20.5.1not-accessiblemandatory
awcPfIptSetId
OBJECT-TYPE
Numeric identifier of the static IP Port filters set.
1.3.6.1.4.1.522.3.20.5.1.1Gaugeread-onlymandatory
awcPfIptSetName
OBJECT-TYPE
Descriptive name of the static IP Port filters set. Max. string length is 64 octets.
1.3.6.1.4.1.522.3.20.5.1.2DisplayString (SIZE(0..64))read-writemandatory
awcPfIptDefaultDisposition
OBJECT-TYPE
Default packet disposition of the static IP Port filters set.
1.3.6.1.4.1.522.3.20.5.1.3AwcPfDispositionread-writemandatory
awcPfIptDefaultUcastTimeToLive
OBJECT-TYPE
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
1.3.6.1.4.1.522.3.20.5.1.4Gaugeread-writemandatory
awcPfIptDefaultNUcastTimeToLive
OBJECT-TYPE
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
1.3.6.1.4.1.522.3.20.5.1.5Gaugeread-writemandatory
awcPfIptSetStatus
OBJECT-TYPE
Row status of the entire static IP Port filters set.
1.3.6.1.4.1.522.3.20.5.1.6RowStatusread-writemandatory
awcPrFltIpPortTable
OBJECT-TYPE
Table of individual static IP Port filters.
1.3.6.1.4.1.522.3.20.6not-accessiblemandatory
awcPrFltIpPortEntry
OBJECT-TYPE
An entry in the individual static IP Port filter table.
1.3.6.1.4.1.522.3.20.6.1not-accessiblemandatory
awcPfIptIpPort
OBJECT-TYPE
IP Port to which this individual static filter applies
1.3.6.1.4.1.522.3.20.6.1.1INTEGER (1..65535)read-onlymandatory
awcPfIptDisposition
OBJECT-TYPE
Designation of how the Port should be handled.
1.3.6.1.4.1.522.3.20.6.1.2AwcPfDispositionread-writemandatory
awcPfIptUserPriority
OBJECT-TYPE
Designation of the priority assigned to packets of the IP Port.
1.3.6.1.4.1.522.3.20.6.1.3AwcPfPriorityread-writemandatory
awcPfIptUcastTimeToLive
OBJECT-TYPE
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
1.3.6.1.4.1.522.3.20.6.1.4Gaugeread-writemandatory
awcPfIptNUcastTimeToLive
OBJECT-TYPE
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
1.3.6.1.4.1.522.3.20.6.1.5Gaugeread-writemandatory
awcPfIptAlert
OBJECT-TYPE
Should an alert be registered when a packet of this IP Port is observed?
1.3.6.1.4.1.522.3.20.6.1.6TruthValueread-writemandatory
awcPfIptStatus
OBJECT-TYPE
Row status of the individual static IP Port filters.
1.3.6.1.4.1.522.3.20.6.1.7RowStatusread-writemandatory
awcMobileIP
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.22
enableMobileIP
OBJECT-TYPE
If true, the Access Point's proxy mobile IP service is enabled. If false, proxy mobile IP service is disabled.
1.3.6.1.4.1.522.3.22.1TruthValueread-writemandatory
awcprimAAP
OBJECT-TYPE
The first AAP hostname or IP address from a list of 3 AAPs.
1.3.6.1.4.1.522.3.22.2DisplayString (SIZE(0..128))read-writemandatory
awcsec1AAP
OBJECT-TYPE
The second AAP hostname or IP address from a list of 3 AAPs.
1.3.6.1.4.1.522.3.22.3DisplayString (SIZE(0..128))read-writemandatory
awcsec2AAP
OBJECT-TYPE
The third AAP hostname or IP address from a list of 3 AAPs.
1.3.6.1.4.1.522.3.22.4DisplayString (SIZE(0..128))read-writemandatory
mipSATable
OBJECT-TYPE
This entity's Mobile IP Local SA Bindings table.
1.3.6.1.4.1.522.3.22.5not-accessiblemandatory
mipSAEntry
OBJECT-TYPE
An entry of SA bindings for a range of IP Addresses.
1.3.6.1.4.1.522.3.22.5.1not-accessiblemandatory
mipSAIpStart
OBJECT-TYPE
Starting IP Address of a range for the SA binding.
1.3.6.1.4.1.522.3.22.5.1.1IpAddressnot-accessiblemandatory
mipSAIpEnd
OBJECT-TYPE
Ending IP Address of the range for the SA binding.
1.3.6.1.4.1.522.3.22.5.1.2IpAddressread-writemandatory
mipSAGroupSPI
OBJECT-TYPE
Group SPI for the range of IP Address in the Local SA binding
1.3.6.1.4.1.522.3.22.5.1.3DisplayString (SIZE(0..128))read-writemandatory
mipSAGroupKey
OBJECT-TYPE
Group Key for the range of IP Address in the Local SA binding
1.3.6.1.4.1.522.3.22.5.1.4DisplayString (SIZE(0..128))read-writemandatory
mipSAStatus
OBJECT-TYPE
Row status of the pMIP SA. Allows deletion via SNMP.
1.3.6.1.4.1.522.3.22.5.1.5RowStatusread-writemandatory
awcmipDebug
OBJECT-TYPE
If true, the Access Point's proxy mobile IP debug information is printed on the console. If false, debug messages are not printed.
1.3.6.1.4.1.522.3.22.6TruthValueread-writemandatory
awcVxConformance
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100
awcVxCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.1
awcVxCompliance
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.1.1
awcVxComplianceRev1
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.1.2
awcVxGroups
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2
awcSystemGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.1
bootconfigVxGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.2
awcSerialDevGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.3
awcFtpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.4
awcIfTableGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.5
awc802dot11Group
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.6
awcUserMgrGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.7
awcHttpdGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.8
awcDnsResGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.9
awcSnmpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.10
awcSntpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.11
awcForwardTblGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.12
awcEventLogGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.14
awcEtherMIBGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.15
awcPolicyGroupsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.16
awcDdpIAPPGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.17
awcHotStandbyGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.18
awcAaaGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.19
awcProtocolFiltersGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.20
awcMobileIpGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.21
awcEthernetLostGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.22
awc802dot11GroupExt1
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.23
awcForwardTblGroupExt1
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.24
awcForwardTblGroupExt2
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.25
awcAaaGroupRev1
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.26
awcTrapLogGroup
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.100.2.100

Notifications

NameOIDStatus
awcTrapLog
NOTIFICATION-TYPE
SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true.
1.3.6.1.4.1.522.0.4