MIBs Depot

AWC-VLAN-CFG-MIB

Registered at
1.3.6.1.4.1.522.3.21
Last updated
2002-09-06 00:00
Organization
Cisco Systems, Inc.
Revisions
2001-07-11 00:00
Namespace
aironet
Source file
AWC-VLAN-CFG-MIB
Digest
sha256:0fab11413e42f0c24cdc816bdbf943a7ee9a467d920694336dd14b188d979950

Description

Aironet products VLAN Configuration MIB.

Contact

Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-aironet@cisco.com

Imports

FromSymbols
AWCVX-MIBAwcDot11MicAlgorithm, AwcDot11WEPKeyPermuteAlgorithm, AwcPfPriority, AwcPolId, AwcVlanId, WEPKeytype128, awcVx
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

AWC-VLAN-CFG-MIB
AWCVX-MIB
BRIDGE-MIB
IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-SMI-v1
SNMPv2-TC
SNMPv2-TC-v1

Textual conventions

NameOIDSyntaxAccessStatus
AwcVlanEncapType
TEXTUAL-CONVENTION
The 802.1Q encapsulation mode. Valid values are: dot1qDisabled (1), Disabled dot1qPriority (2) 802.1Q Priority Tagging dot1qHybrid (3), 802.1Q VLAN Hybrid Trunk dot1qTrunk (4) 802.1Q VLAN Trunk The default value is normally Disabled.
current
AwcVlanIndex
TEXTUAL-CONVENTION
A value used to index per-VLAN tables. Represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see AwcVlanId textual convention). The value 4095 indicates that the conceptual row applies to non-VLAN-tagged frames (though it would be more directly representative of the packet format, 0 can not be used for this purpose, per SNMP conventions).
current

Objects

NameOIDSyntaxAccessStatus
awcVlanCfgObjects
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.21.1
awcMaxVlanIds
OBJECT-TYPE
The Maximum number of discrete VLAN IDs supported. The VLAN IDs need not be consecutive.
1.3.6.1.4.1.522.3.21.1.1Unsigned32read-onlycurrent
awcVlanEncapMode
OBJECT-TYPE
The encapsulation mode setting controls transmit tagging logic for all ports. The value of this object is derived from other settings within the VLAN MIB.
1.3.6.1.4.1.522.3.21.1.2AwcVlanEncapTyperead-onlycurrent
awcNativeVlanId
OBJECT-TYPE
Native VLAN ID for the device. The default Native VLAN ID is 0, for no VLAN ID. If the device is attached to an Ethernet bridge/switch VLAN port then a non-zero Native VLAN ID must match the Port VLAN ID of the bridge/switch port. The Native VLAN ID is the default VLAN ID for frames that are not otherwise associated with a VLAN ID.
1.3.6.1.4.1.522.3.21.1.3AwcVlanIdread-writecurrent
awcVlanAllowEncrypted
OBJECT-TYPE
When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as no other VLAN parameters necessitate use of encryption. The default value of this attribute shall be true. The general use for awcVlanAllowEncrypted to be true even when no static WEP keys are set for a VLAN is to allow a station to utilize EAP authentication to encrypt directed packets, even while multicast packets are unencrypted.
1.3.6.1.4.1.522.3.21.1.4TruthValueread-writecurrent
awcVlanAnyEnabled
OBJECT-TYPE
When this attribute is true, VLAN operation of the system is enabled when any awcVlanEnabled value is true. When this attribute is false, VLAN operation is disabled. The awcVlanAnyEnabled thus acts as a master switch to enable or disable VLAN operation.
1.3.6.1.4.1.522.3.21.1.5TruthValueread-writecurrent
awcVlanCfgTable
OBJECT-TYPE
A table used for configuring and managing VLANS.
1.3.6.1.4.1.522.3.21.1.6not-accessiblecurrent
awcVlanCfgEntry
OBJECT-TYPE
VLAN table entry containing parameters for configuring and managing a particular VLAN.
1.3.6.1.4.1.522.3.21.1.6.1not-accessiblecurrent
awcVlanIndex
OBJECT-TYPE
VLAN ID to which the parameters in this conceptual row shall be applied. If 4095, the parameters in this conceptual row shall be applied to non-VLAN-tagged frames.
1.3.6.1.4.1.522.3.21.1.6.1.1AwcVlanIndexnot-accessiblecurrent
awcVlanPolId
OBJECT-TYPE
Default Policy Group Identifier for hosts occupying this VLAN.
1.3.6.1.4.1.522.3.21.1.6.1.2AwcPolIdread-createcurrent
awcVlanEnabled
OBJECT-TYPE
If true, this VLAN is enabled on all trunk and hybrid ports. If false, this VLAN is disabled on all ports.
1.3.6.1.4.1.522.3.21.1.6.1.3TruthValueread-createcurrent
awcVlanNUcastKeyRotationInterval
OBJECT-TYPE
WEP key rotation period. 0 indicates no key rotation.
1.3.6.1.4.1.522.3.21.1.6.1.4INTEGER (0..10000000)read-createcurrent
awcVlanRowStatus
OBJECT-TYPE
Used for creating/deleting conceptual rows in this table.
1.3.6.1.4.1.522.3.21.1.6.1.5RowStatusread-createcurrent
awcVlanMicAlgorithm
OBJECT-TYPE
Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations assigned to this VLAN. This object is not applicable for the reserved VLAN 4095.
1.3.6.1.4.1.522.3.21.1.6.1.6AwcDot11MicAlgorithmread-createcurrent
awcVlanWEPKeyPermuteAlgorithm
OBJECT-TYPE
Function through which the WEP encryption key is permuted between key renewal periods for stations assigned to this VLAN. This object is not applicable for the reserved VLAN 4095.
1.3.6.1.4.1.522.3.21.1.6.1.7AwcDot11WEPKeyPermuteAlgorithmread-createcurrent
awcVlanName
OBJECT-TYPE
Descriptive textual name for the VLAN.
1.3.6.1.4.1.522.3.21.1.6.1.8OCTET STRINGread-createcurrent
awcVlanDefaultUserPriority
OBJECT-TYPE
Designation of the priority assigned to packets transmitted over this VLAN, if no other filter or classification rule has yet assigned a priority.
1.3.6.1.4.1.522.3.21.1.6.1.9AwcPfPriorityread-createcurrent
awcVlanAlert
OBJECT-TYPE
Should an alert be registered when a packet on this VLAN is observed?
1.3.6.1.4.1.522.3.21.1.6.1.10TruthValueread-createcurrent
awcVlanNUcastKeyTable
OBJECT-TYPE
Default Shared WEP Keys for all 802.11 packets transmitted and received as non-VLAN-tagged frames over a port with the Port VLAN ID specified as awcVlanIndex. If WEP encryption is enabled for transmitted 802.11 frames, then the set of 1 to 4 default shared WEP keys are used to encrypt transmitted 802.11 broadcast/multicast frames associated with the Port VLAN ID. The shared WEP keys are also used to encrypt/decrypt unicast frames, associated with the Port VLAN ID, if an individual session key is not defined for the target station address.
1.3.6.1.4.1.522.3.21.1.7not-accessiblecurrent
awcVlanNUcastKeyEntry
OBJECT-TYPE
An entry in the awcVlanNUcastKeyTable table.
1.3.6.1.4.1.522.3.21.1.7.1not-accessiblecurrent
awcVlanNUcastKeyIndex
OBJECT-TYPE
802.11 WEP Key Index, + 1, used when transmitting or receiving frames with this key.
1.3.6.1.4.1.522.3.21.1.7.1.1INTEGER (1..4)not-accessiblecurrent
awcVlanNUcastKeyLen
OBJECT-TYPE
Length in octets of awcVlanNUcastKeyValue. Common values are 5 for 40-bit WEP and 13 for 128-bit WEP. A value of 0 means that the key is not set.
1.3.6.1.4.1.522.3.21.1.7.1.2INTEGER (0..13)read-writecurrent
awcVlanNUcastKeyValue
OBJECT-TYPE
A WEP default secret key value. The value is write-only (attempt to read will result in return of zero-length string).
1.3.6.1.4.1.522.3.21.1.7.1.3WEPKeytype128read-writecurrent
awcVlanAllowUnencryptedVlanId
OBJECT-TYPE
Single VLAN ID on which unencrypted packets are allowed. The default Unencrypted VLAN ID is 0, meaning that all VLANs require full encryption.
1.3.6.1.4.1.522.3.21.1.8AwcVlanIdread-writecurrent
awcVlanCfgNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.21.2
awcVlanCfgConformance
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.21.3
awcVlanCfgCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.21.3.1
awcVlanCfgGroups
OBJECT-IDENTITY
1.3.6.1.4.1.522.3.21.3.2

Conformance

NameOIDStatus
awcVlanCfgCompliance
MODULE-COMPLIANCE
The compliance statement for the awcVlanCfgMIB group.
1.3.6.1.4.1.522.3.21.3.1.1current
awcVlanCfgObjectsGroup
OBJECT-GROUP
1.3.6.1.4.1.522.3.21.3.2.1current