ATS-MIB
- Registered at
- 1.3.6.1.4.1.37662
- Namespace
- ats
- Source file
ATS-MIB- Digest
sha256:375ead803bb4a00606e06b94a740e54859b233489b3583f334bbeb1a7703c588
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION |
| UPS-MIB | NonNegativeInteger, PositiveInteger |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ATS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UPS-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ats OBJECT-IDENTITY | 1.3.6.1.4.1.37662 | |||
| product OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1 | |||
| webAppliance OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2 | |||
| atsAgent OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2 | |||
| single OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1 | |||
| atsObjectGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1 | |||
| atsIdentGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.1 | |||
| atsIdentGroupModel OBJECT-TYPE The device model name. | 1.3.6.1.4.1.37662.1.2.2.1.1.1.1 | DisplayString | read-only | mandatory |
| atsIdentGroupSerialNumber OBJECT-TYPE The device serial number. | 1.3.6.1.4.1.37662.1.2.2.1.1.1.2 | DisplayString | read-only | mandatory |
| atsIdentGroupManufacturer OBJECT-TYPE The device manufacturer name. | 1.3.6.1.4.1.37662.1.2.2.1.1.1.3 | DisplayString | read-only | mandatory |
| atsIdentGroupFirmwareRevision OBJECT-TYPE The device firmware revision. | 1.3.6.1.4.1.37662.1.2.2.1.1.1.4 | DisplayString | read-only | mandatory |
| atsIdentGroupAgentFirmwareRevision OBJECT-TYPE The agent firmware revision. | 1.3.6.1.4.1.37662.1.2.2.1.1.1.5 | DisplayString | read-only | mandatory |
| atsInputGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.2 | |||
| atsInputGroupPreference OBJECT-TYPE This shows the Output Source Priority by Source A or Source B. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.1 | DisplayString | read-only | mandatory |
| atsInputGroupSourceAstatus OBJECT-TYPE This field shows the status of the source A. Status included? 'OK','Fail'. 'OK' mean frequency and voltage of Source A are normal. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.2 | INTEGER {fail(1), ok(2)} | read-only | mandatory |
| atsInputGroupSourceAinputVoltage OBJECT-TYPE The source A input voltage of the ATS input in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.3 | INTEGER | read-only | mandatory |
| atsInputGroupSourceAinputFrequency OBJECT-TYPE The source A input frequency of the ATS input in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.4 | INTEGER | read-only | mandatory |
| atsInputGroupSourceBstatus OBJECT-TYPE This field shows the status of the source B. Status included? 'OK','Fail'. 'OK' mean frequency and voltage of Source B are normal. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.5 | INTEGER {fail(1), ok(2)} | read-only | mandatory |
| atsInputGroupSourceBinputVoltage OBJECT-TYPE The source B input voltage of the ATS input in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.6 | INTEGER | read-only | mandatory |
| atsInputGroupSourceBinputFrequency OBJECT-TYPE The source B input frequency of the ATS input in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.7 | INTEGER | read-only | mandatory |
| atsInputGroupSourceAvoltageUpperLimit OBJECT-TYPE The source A voltage upper limit of the ATS input in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.8 | INTEGER | read-only | mandatory |
| atsInputGroupSourceAvoltageLowerLimit OBJECT-TYPE The source A voltage lower limit of the ATS input in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.9 | INTEGER | read-only | mandatory |
| atsInputGroupSourceAfrequencyUpperLimit OBJECT-TYPE The source A frequency upper limit of the ATS input in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.10 | INTEGER | read-only | mandatory |
| atsInputGroupSourceAfrequencyLowerLimit OBJECT-TYPE The source A frequency lower limit of the ATS input in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.11 | INTEGER | read-only | mandatory |
| atsInputGroupSourceBvoltageUpperLimit OBJECT-TYPE The source B voltage upper limit of the ATS input in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.12 | INTEGER | read-only | mandatory |
| atsInputGroupSourceBvoltageLowerLimit OBJECT-TYPE The source B voltage lower limit of the ATS input in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.13 | INTEGER | read-only | mandatory |
| atsInputGroupSourceBfrequencyUpperLimit OBJECT-TYPE The source B frequency upper limit of the ATS input in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.14 | INTEGER | read-only | mandatory |
| atsInputGroupSourceBfrequencyLowerLimit OBJECT-TYPE The source B frequency lower limit of the ATS input in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.2.15 | INTEGER | read-only | mandatory |
| atsOutputGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.3 | |||
| atsOutputGroupOutputSource OBJECT-TYPE Output source is supply by Source A or Source B. Status included? 'Source A','Source B'. | 1.3.6.1.4.1.37662.1.2.2.1.1.3.1 | DisplayString | read-only | mandatory |
| atsOutputGroupOutputVoltage OBJECT-TYPE The Output Voltage in volts. | 1.3.6.1.4.1.37662.1.2.2.1.1.3.2 | NonNegativeInteger | read-only | mandatory |
| atsOutputGroupOutputFequency OBJECT-TYPE The output fequency in 0.1 Hz. | 1.3.6.1.4.1.37662.1.2.2.1.1.3.3 | NonNegativeInteger | read-only | mandatory |
| atsOutputGroupOutputCurrent OBJECT-TYPE The output current in 0.1 A. | 1.3.6.1.4.1.37662.1.2.2.1.1.3.4 | NonNegativeInteger | read-only | mandatory |
| atsOutputGroupLoad OBJECT-TYPE The load in %. | 1.3.6.1.4.1.37662.1.2.2.1.1.3.5 | NonNegativeInteger | read-only | mandatory |
| atsHmiSwitchGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.4 | |||
| atsHmiSwitchGroupBuzzer OBJECT-TYPE This field shows the status of the buzzer. Status included? 'Enable','Disable'. | 1.3.6.1.4.1.37662.1.2.2.1.1.4.1 | INTEGER {buzzerDisabled(1), buzzerEnabled(2)} | read-only | mandatory |
| atsHmiSwitchGroupAtsAlarm OBJECT-TYPE This shows the alarm occured. | 1.3.6.1.4.1.37662.1.2.2.1.1.4.2 | INTEGER {nothing(1), atsOccurAlarm(2)} | read-only | mandatory |
| atsHmiSwitchGroupAutoReturn OBJECT-TYPE Auto recover to that setting value when two input source normal. | 1.3.6.1.4.1.37662.1.2.2.1.1.4.3 | INTEGER {off(1), on(2)} | read-only | mandatory |
| atsHmiSwitchGroupSourceTransferByLoad OBJECT-TYPE On: If overload timeout occurred , ATS will tranfer to another source automaticlly. Off:If overload timeout occurred , ATS will turn off the output source. | 1.3.6.1.4.1.37662.1.2.2.1.1.4.4 | INTEGER {off(1), on(2)} | read-only | mandatory |
| atsHmiSwitchGroupSourceTransferByPhase OBJECT-TYPE On: when the transfer of output source occur, the transfer can active if differernce of phase less than setting value Off: Switch transfer immed... whatever difference of phase. | 1.3.6.1.4.1.37662.1.2.2.1.1.4.5 | INTEGER {off(1), on(2)} | read-only | mandatory |
| atsMiscellaneousGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.5 | |||
| atsMiscellaneousGroupAtsSystemTemperture OBJECT-TYPE The ATS system temperture in degree C. | 1.3.6.1.4.1.37662.1.2.2.1.1.5.1 | INTEGER | read-only | mandatory |
| atsMiscellaneousGroupSystemMaxCurrent OBJECT-TYPE The system max current int 0.1 Amp. | 1.3.6.1.4.1.37662.1.2.2.1.1.5.2 | INTEGER | read-only | mandatory |
| atsControlGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.6 | |||
| atsControlGroupBuzzerAlarmControl OBJECT-TYPE The buzzer alarm control. | 1.3.6.1.4.1.37662.1.2.2.1.1.6.1 | INTEGER {buzzerOff(1), buzzerOn(2)} | read-write | mandatory |
| atsControlGroupManualTransfer OBJECT-TYPE User can click this bottom to decide output source supply is Source A or Source B. | 1.3.6.1.4.1.37662.1.2.2.1.1.6.2 | INTEGER | read-write | mandatory |
| agentConfig OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.7 | |||
| agentConfigIpaddress OBJECT-TYPE The ip address that NMS can identify the managed device | 1.3.6.1.4.1.37662.1.2.2.1.1.7.1 | IpAddress | read-write | mandatory |
| agentConfigGateway OBJECT-TYPE The default gateway that allow device managed through routers | 1.3.6.1.4.1.37662.1.2.2.1.1.7.2 | IpAddress | read-write | mandatory |
| agentConfigSubnetMask OBJECT-TYPE Internet address subnet mask | 1.3.6.1.4.1.37662.1.2.2.1.1.7.3 | IpAddress | read-write | mandatory |
| agentConfigDate OBJECT-TYPE The date in agent, format is (dd/mm/yyyy) | 1.3.6.1.4.1.37662.1.2.2.1.1.7.4 | DisplayString (SIZE(10)) | read-write | mandatory |
| agentConfigTime OBJECT-TYPE The time in agent, format is (hh:mm:ss) | 1.3.6.1.4.1.37662.1.2.2.1.1.7.5 | DisplayString (SIZE(8)) | read-write | mandatory |
| agentConfigHistoryLogFrequency OBJECT-TYPE The frequency of the updation of the history log. The value is in seconds | 1.3.6.1.4.1.37662.1.2.2.1.1.7.6 | INTEGER (1..28800) | read-write | mandatory |
| agentConfigExtHistoryLogFrequency OBJECT-TYPE The ups parameters are sampled at the rate governed by the mconfigHistroyLogFrequency. These sampled values are further conslidated over period of time which is determined by this object. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.7 | INTEGER (1..10080) | read-write | mandatory |
| agentConfigPollRate OBJECT-TYPE The frequency that proxy agent polls the connected UPS in JBUS protocol. (unit : second) | 1.3.6.1.4.1.37662.1.2.2.1.1.7.8 | INTEGER (1..999) | read-write | mandatory |
| agentConfigBaudRate OBJECT-TYPE The serial port communication speed. only 9600 allowed | 1.3.6.1.4.1.37662.1.2.2.1.1.7.9 | INTEGER | read-only | mandatory |
| agentConfigDhcpStatue OBJECT-TYPE Enable or disable DHCP/BootP capability | 1.3.6.1.4.1.37662.1.2.2.1.1.7.10 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| agentConfigTelnetStatue OBJECT-TYPE Enable or disable telnet access | 1.3.6.1.4.1.37662.1.2.2.1.1.7.11 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| agentConfigTftpStatue OBJECT-TYPE Enable or disable network upgrade capability | 1.3.6.1.4.1.37662.1.2.2.1.1.7.12 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| agentConfigResetToDefault OBJECT-TYPE Reset all parameters of ATS to default value | 1.3.6.1.4.1.37662.1.2.2.1.1.7.13 | INTEGER {reset(1), nothing(2)} | read-write | mandatory |
| agentConfigRestart OBJECT-TYPE Restart ATS | 1.3.6.1.4.1.37662.1.2.2.1.1.7.14 | INTEGER {restart(1), nothing(2)} | read-write | mandatory |
| agentConfigClearAgentLog OBJECT-TYPE Clear agent log data | 1.3.6.1.4.1.37662.1.2.2.1.1.7.15 | INTEGER {clear(1), nothing(2)} | read-write | mandatory |
| agentConfigClearEventLog OBJECT-TYPE Clear event log data | 1.3.6.1.4.1.37662.1.2.2.1.1.7.16 | INTEGER {clear(1), nothing(2)} | read-write | mandatory |
| agentConfigClearExtHistoryLog OBJECT-TYPE Clear extented history log data | 1.3.6.1.4.1.37662.1.2.2.1.1.7.17 | INTEGER {clear(1), nothing(2)} | read-write | mandatory |
| agentConfigClearHistoryLog OBJECT-TYPE Clear history log data | 1.3.6.1.4.1.37662.1.2.2.1.1.7.18 | INTEGER {clear(1), nothing(2)} | read-write | mandatory |
| agentConfigTrapRetryCount OBJECT-TYPE The count of repeat traps to send to NMS before trap acknowledge received. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.19 | INTEGER | read-write | mandatory |
| agentConfigTrapRetryTime OBJECT-TYPE The time between retry traps sned to NMS. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.20 | INTEGER | read-write | mandatory |
| agentConfigTrapAckSignature OBJECT-TYPE The signature of trap acknowledge. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.21 | INTEGER | read-write | mandatory |
| agentConfigMibVersion OBJECT-TYPE The version of MIB spec. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.22 | INTEGER | read-only | mandatory |
| agentConfigTrapsReceiversTable OBJECT-TYPE A list of managers to send traps to. The number of entries is given by the value of agentConfigNumTrapReceivers | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23 | not-accessible | mandatory | |
| agentConfigTrapsReceiversEntry OBJECT-TYPE The managers to send traps to. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1 | not-accessible | mandatory | |
| trapsIndex OBJECT-TYPE The index to a trap receiver entry. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.1 | INTEGER (0..65535) | read-only | mandatory |
| trapsReceiverAddr OBJECT-TYPE The IP address of the manager to send a trap to. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.2 | DisplayString | read-write | mandatory |
| receiverCommunityString OBJECT-TYPE The community name to use in the trap when sent to the manager. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.3 | DisplayString (SIZE(0..19)) | read-write | mandatory |
| receiverNmsType OBJECT-TYPE The trap group that NMS desired. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.4 | INTEGER {none(1), ats-trap(2)} | read-write | mandatory |
| receiverSeverityLevel OBJECT-TYPE The severity level of traps to be received by this manager. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.5 | INTEGER {informational(1), warning(2), severe(3)} | read-write | mandatory |
| receiverDescription OBJECT-TYPE Description of trap receivers | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.6 | DisplayString (SIZE(0..31)) | read-write | mandatory |
| agentConfigAccessControlTable OBJECT-TYPE A list of managers which can access ATS with private community string. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24 | not-accessible | mandatory | |
| agentConfigAccessControlEntry OBJECT-TYPE The managers. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1 | not-accessible | mandatory | |
| accessIndex OBJECT-TYPE The index to a access control entry. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.1 | INTEGER | read-only | mandatory |
| accessControlAddr OBJECT-TYPE The IP address of the manager to access ATS | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.2 | IpAddress | read-write | mandatory |
| accessCommunityString OBJECT-TYPE The community name to use in the manager when access ATS | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.3 | DisplayString (SIZE(0..19)) | read-write | mandatory |
| accessControlMode OBJECT-TYPE Access type, only read/Write access type can change parameter of ATS | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.4 | INTEGER {readOnly(1), readWrite(2), notAccess(3)} | read-write | mandatory |
| agentConfigDefaultLanguage OBJECT-TYPE The default languauge for browser, when set to auto(1) ATS will send page in the language depends on the request language of browser. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.25 | INTEGER {auto(1), english(2), traditionalChinese(3), simplifiedChinese(4)} | read-write | mandatory |
| agentConfigIPv6AddrStatus OBJECT-TYPE The status of IPv6 global address. When the auto-configuration of IPv6 address is disabled, it shows manual configuration(3). Otherwise, it shows valid(2) for auto-configured successfully, or shows invalid(1) for the failure in auto-configured. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.26 | INTEGER {invalid(1), valid(2), manualConfiguration(3)} | read-only | mandatory |
| agentConfigIPv6AddrAutoConfig OBJECT-TYPE The state of IPv6 address auto-configuration. If set to enable(1), ATS will try to get a valid global/site-local address from IPv6 router or DHCPv6 server on the same link. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.27 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| agentConfigIPv6LinkLocalAddr OBJECT-TYPE The IPv6 link-local address of ATS. It is auto-configured based on MAC address of ATS. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.28 | DisplayString (SIZE(0..255)) | read-only | mandatory |
| agentConfigIPv6GlobalAddr OBJECT-TYPE The IPv6 global/site-local address of ATS. If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.29 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| agentConfigIPv6PrefixlLength OBJECT-TYPE The prefix length of IPv6 global/site-local address.If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.30 | INTEGER (1..128) | read-write | mandatory |
| agentConfigIPv6DefaultRouter OBJECT-TYPE The address of IPv6 default router. If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively. | 1.3.6.1.4.1.37662.1.2.2.1.1.7.31 | DisplayString (SIZE(0..255)) | read-write | mandatory |
| emdStatus OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.8 | |||
| emdSatatusEmdType OBJECT-TYPE The type of EMD plugged into the port. | 1.3.6.1.4.1.37662.1.2.2.1.1.8.1 | INTEGER {unknown(1), disabled(2), emdHT(3), emdT(4)} | read-only | mandatory |
| emdSatatusTemperature OBJECT-TYPE The measurement of EMD temperature, in 0.1 degree | 1.3.6.1.4.1.37662.1.2.2.1.1.8.2 | INTEGER | read-only | mandatory |
| emdSatatusHumidity OBJECT-TYPE The measurement of EMD humidity, in 0.1 degree | 1.3.6.1.4.1.37662.1.2.2.1.1.8.3 | INTEGER | read-only | mandatory |
| emdSatatusAlarm1 OBJECT-TYPE The EMD alarm-1 status | 1.3.6.1.4.1.37662.1.2.2.1.1.8.4 | INTEGER {unknow(1), disabled(2), active(3), inactive(4)} | read-only | mandatory |
| emdSatatusAlarm2 OBJECT-TYPE The EMD alarm-2 status | 1.3.6.1.4.1.37662.1.2.2.1.1.8.5 | INTEGER {unknow(1), disabled(2), active(3), inactive(4)} | read-only | mandatory |
| emdConfig OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.9 | |||
| usahEmdConfigEmdConfig OBJECT-TYPE Enable or disable to detect presence of EMD | 1.3.6.1.4.1.37662.1.2.2.1.1.9.1 | INTEGER {disabled(1), auto(2)} | read-write | mandatory |
| emdConfigEmdName OBJECT-TYPE Description of EMD | 1.3.6.1.4.1.37662.1.2.2.1.1.9.2 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| emdConfigTemperature OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3 | |||
| emdConfigTempName OBJECT-TYPE Description of EMD temperature sensor | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.1 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| emdConfigTempHighSetPoint OBJECT-TYPE The set point for high temperature warning, in degrees | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.2 | INTEGER | read-write | mandatory |
| emdConfigTempHighStatus OBJECT-TYPE To enable/disable high set point check with emd temperature. | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.3 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| emdConfigTempLowSetPoint OBJECT-TYPE The set point for low temperature warning, in degrees | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.4 | INTEGER | read-write | mandatory |
| emdConfigTempLowStatus OBJECT-TYPE To enable/disable low set point check with emd temperature. | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.5 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| emdConfigTempOffset OBJECT-TYPE The offset to calibrate temperature of EMD, in degrees | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.6 | INTEGER | read-write | mandatory |
| emdConfigHumidity OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4 | |||
| emdConfigHumidityName OBJECT-TYPE Description of EMD humidity sensor | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.1 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| emdConfigHumidityHighSetPoint OBJECT-TYPE The set point for high humidity warning, in % | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.2 | INTEGER | read-write | mandatory |
| emdConfigHumidityHighStatus OBJECT-TYPE To enable/disable high set point check with emd humidity. | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.3 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| emdConfigHumidityLowSetPoint OBJECT-TYPE The set point for low humidity warning, in % | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.4 | INTEGER | read-write | mandatory |
| emdConfigHumidityLowStatus OBJECT-TYPE To enable/disable low set point check with emd humidity. | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.5 | INTEGER {enabled(1), disabled(2)} | read-write | mandatory |
| emdConfigHumidityOffset OBJECT-TYPE The offset to calibrate humidity of EMD, in % | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.6 | INTEGER | read-write | mandatory |
| emdConfigAlarm1 OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.9.5 | |||
| emdConfigAlarm1Name OBJECT-TYPE Description of EMD alarm-1 | 1.3.6.1.4.1.37662.1.2.2.1.1.9.5.1 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| emdConfigAlarm1Type OBJECT-TYPE The alarm-1 operation type | 1.3.6.1.4.1.37662.1.2.2.1.1.9.5.2 | INTEGER {disabled(1), nomralOpen(2), normalClose(3)} | read-write | mandatory |
| emdConfigAlarm2 OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.1.9.6 | |||
| emdConfigAlarm2Name OBJECT-TYPE Description of EMD alarm-2 | 1.3.6.1.4.1.37662.1.2.2.1.1.9.6.1 | DisplayString (SIZE(0..15)) | read-write | mandatory |
| emdConfigAlarm2Type OBJECT-TYPE The alarm-1 operation type | 1.3.6.1.4.1.37662.1.2.2.1.1.9.6.2 | INTEGER {disabled(1), nomralOpen(2), normalClose(3)} | read-write | mandatory |
| atsTrapGroup OBJECT-IDENTITY | 1.3.6.1.4.1.37662.1.2.2.1.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| atsAtsAlarm NOTIFICATION-TYPE WARNING: ATS Alarm. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.1 | |
| atsSourceAvoltageAbnormal NOTIFICATION-TYPE WARNING: Source A voltage abnormal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.2 | |
| atsSourceBvoltageAbnormal NOTIFICATION-TYPE WARNING: Source B voltage abnormal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.3 | |
| atsSourceAfrequencyAbnormal NOTIFICATION-TYPE WARNING: Source A frequency abnormal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.4 | |
| atsSourceBfrequencyAbnormal NOTIFICATION-TYPE WARNING: Source B frequency abnormal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.5 | |
| atsOutputOverLoad NOTIFICATION-TYPE SEVERE: Output over load. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.6 | |
| atsWorkPowerAabnormal NOTIFICATION-TYPE SEVERE: Unit fault (Working power A abnormal). | 1.3.6.1.4.1.37662.1.2.2.1.2.0.7 | |
| atsWorkPowerBabnormal NOTIFICATION-TYPE SEVERE: Unit fault (Working power B abnormal). | 1.3.6.1.4.1.37662.1.2.2.1.2.0.8 | |
| atsOverTemperature NOTIFICATION-TYPE WARNING: Cabinet over temperature. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.9 | |
| atsDcOffsetAbnormal NOTIFICATION-TYPE SEVERE: Unit fault (Sensor circuit abnormal). | 1.3.6.1.4.1.37662.1.2.2.1.2.0.10 | |
| atsEepromAbnormal NOTIFICATION-TYPE SEVERE: Unit fault (EEPROM data abnormal) | 1.3.6.1.4.1.37662.1.2.2.1.2.0.11 | |
| atsLcdNotConnect NOTIFICATION-TYPE SEVERE: LCD panel connection abnormal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.12 | |
| atsOutputExceedsOverloadTime NOTIFICATION-TYPE SEVERE: Overload time out, Output off, Reset needed. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.13 | |
| atsInputPhaseDifference NOTIFICATION-TYPE SEVERE: Phase difference between resources exceed user defined value, Output off, Reset needed. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.14 | |
| atsUserSetOverLoad NOTIFICATION-TYPE WARNING: User defined load pre-alarm. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.15 | |
| atsAtsAlarmToNormal NOTIFICATION-TYPE INFORMATION: ATS Alarm Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.16 | |
| atsSourceAvoltageAbnormalToNormal NOTIFICATION-TYPE INFORMATION: Source A Voltage Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.17 | |
| atsSourceBvoltageAbnormalToNormal NOTIFICATION-TYPE INFORMATION: Source B Voltage Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.18 | |
| atsSourceAfrequencyAbnormalToNormal NOTIFICATION-TYPE INFORMATION: Source A Frequency Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.19 | |
| atsSourceBfrequencyAbnormalToNormal NOTIFICATION-TYPE INFORMATION: Source B Frequency Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.20 | |
| atsOutputOverLoadToNormal NOTIFICATION-TYPE INFORMATION: Output Load Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.21 | |
| atsWorkPowerAabnormalToNormal NOTIFICATION-TYPE INFORMATION: Unit Normal (Working power A normal). | 1.3.6.1.4.1.37662.1.2.2.1.2.0.22 | |
| atsWorkPowerBabnormalToNormal NOTIFICATION-TYPE INFORMATION: Unit Normal (Working power B normal). | 1.3.6.1.4.1.37662.1.2.2.1.2.0.23 | |
| atsOverTemperatureToNormal NOTIFICATION-TYPE INFORMATION: Cabinet temperature Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.24 | |
| atsDcOffsetAbnormalToNormal NOTIFICATION-TYPE INFORMATION: Unit Normal (Sensor circuit normal). | 1.3.6.1.4.1.37662.1.2.2.1.2.0.25 | |
| atsEepromAbnormalToNormal NOTIFICATION-TYPE INFORMATION: Unit normal (EEPROM data normal) | 1.3.6.1.4.1.37662.1.2.2.1.2.0.26 | |
| atsLcdNotConnectToNormal NOTIFICATION-TYPE INFORMATION: LCD panel connection normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.27 | |
| atsOutputExceedsOverloadTimeToNormal NOTIFICATION-TYPE INFORMATION: Output Load Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.28 | |
| atsInputPhaseDifferenceToNormal NOTIFICATION-TYPE INFORMATION: Input sources return to normal phase. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.29 | |
| atsUserSetOverLoadToNormal NOTIFICATION-TYPE INFORMATION: User defined load return to Normal. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.30 | |
| atsCommunicationLost NOTIFICATION-TYPE SEVERE: Communication to the ATS has been lost. Steps to reestablish communication are in progress. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.31 | |
| atsCommunicationEstablished NOTIFICATION-TYPE INFORMATION: Communication with the ATS has been established. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.32 | |
| emdTemperatureNotHigh NOTIFICATION-TYPE INFORMATION: The temperature of EMD back to normal from high warning. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.33 | |
| emdTemperatureTooHigh NOTIFICATION-TYPE WARNING: The temperature of EMD higher than set point. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.34 | |
| emdTemperatureNotLow NOTIFICATION-TYPE INFORMATION: The temperature of EMD back to normal from low warning. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.35 | |
| emdTemperatureTooLow NOTIFICATION-TYPE WARNING: The temperature of EMD lower than set point. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.36 | |
| emdHumidityNotHigh NOTIFICATION-TYPE INFORMATION: The humidity of EMD back to normal from high warning. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.37 | |
| emdHumidityTooHigh NOTIFICATION-TYPE WARNING: The humidity of EMD higher than set point. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.38 | |
| emdHumidityNotLow NOTIFICATION-TYPE INFORMATION: The humidity of EMD back to normal from low warning. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.39 | |
| emdHumidityTooLow NOTIFICATION-TYPE WARNING: The humidity of EMD lower than set point. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.40 | |
| emdAlarm1Normal NOTIFICATION-TYPE INFORMATION: The status of emd alarm-1 back to normal from active. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.41 | |
| emdAlarm1Active NOTIFICATION-TYPE WARNING: The status of emd alarm-1 activated. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.42 | |
| emdAlarm2Normal NOTIFICATION-TYPE INFORMATION: The status of emd alarm-2 back to normal from active. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.43 | |
| emdAlarm2Active NOTIFICATION-TYPE WARNING: The status of emd alarm-2 activated. | 1.3.6.1.4.1.37662.1.2.2.1.2.0.44 |