ARUBAWIRED-LLDP-MIB
- Registered at
- 1.3.6.1.4.1.47196.4.1.1.3.9
- Last updated
- 2019-04-15 00:00
- Organization
- HPE/Aruba Networking Division
- Revisions
- 2019-04-15 00:00
- Namespace
- arubaos
- Source file
ARUBAWIRED-LLDP-MIB- Digest
sha256:5488cec95b3770c5f46ad1fedc84db0371cf6bf0ba4a89c403eeead3b359c07e
Description
This MIB module describes management objects that manage LLDP information related to Power Source Equipment (PSE). This is the MIB module related to HPE Aruba LLDP
Contact
Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747
Imports
| From | Symbols |
|---|---|
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
| ENTITY-MIB | entPhysicalIndex |
| LLDP-MIB | lldpLocPortNum, lldpRemIndex, lldpRemLocalPortNum, lldpRemTimeMark |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ARUBAWIRED-LLDP-MIB ARUBAWIRED-NETWORKING-OID ENTITY-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB IANA-ENTITY-MIB IANAifType-MIB IF-MIB LLDP-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB UUID-TC-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| arubaWiredLldpXdot3Objects OBJECT-IDENTITY | 1.3.6.1.4.1.47196.4.1.1.3.9.1 | |||
| arubaWiredLldpXdot3LocalData OBJECT-IDENTITY | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1 | |||
| arubaWiredLldpXdot3LocPowerTable OBJECT-TYPE This table contains one row per port of power ethernet information (as a part of the LLDP 802.3bt organizational extension) on the local system known to this agent. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1 | not-accessible | current | |
| arubaWiredLldpXdot3LocPowerEntry OBJECT-TYPE Information about a particular port component. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1 | not-accessible | current | |
| arubaWiredLldpXdot3LocPowerPortClass OBJECT-TYPE The value that identifies the port Class of the given port associated with the local system. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.1 | INTEGER {pClassPSE(1), pClassPD(2)} | read-only | current |
| arubaWiredLldpXdot3LocPowerMDISupported OBJECT-TYPE The truth value used to indicate whether the MDI power is supported on the given port associated with the local system. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.2 | TruthValue | read-only | current |
| arubaWiredLldpXdot3LocPowerMDIEnabled OBJECT-TYPE The truth value used to indicate whether the MDI power is enabled on given port associated with the local system. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.3 | TruthValue | read-only | current |
| arubaWiredLldpXdot3LocPowerPairControlable OBJECT-TYPE The truth value used to indicate the ability to control which PSE Pinout Alternative is used for PD detection and power. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.4 | TruthValue | read-only | current |
| arubaWiredLldpXdot3LocPowerPairs OBJECT-TYPE The truth value that identifies the PSE Pinout Alternative in use for detecting and supplying power to the PD. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.5 | INTEGER {pairSignal(1), pairSpare(2)} | read-only | current |
| arubaWiredLldpXdot3LocPowerClass OBJECT-TYPE The truth value that indicates the requested Class of the PD. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.6 | INTEGER {class0(1), class1(2), class2(3), class3(4), class4(5)} | read-only | current |
| arubaWiredLldpXdot3LocPowerType OBJECT-TYPE This field reflects the actual local power type. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.7 | INTEGER {type2PSE(1), type2PD(2), type1PSE(3), type1PD(4)} | read-only | current |
| arubaWiredLldpXdot3LocPowerSource OBJECT-TYPE This field reflects the requested local device power source. When the power type is PSE, this field shall be set to primary(2) when the PSE is sourcing its power through the PI from its primary supply; to backup(3) when the PSE is sourcing its power through the PI from a backup source; and to unknown(1) when this information is not available. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.8 | INTEGER {unknown(1), primary(2), backup(3), reserved(4)} | read-only | current |
| arubaWiredLldpXdot3LocPowerPriority OBJECT-TYPE This field reflects the requested local device power priority. When the power type is PD, this field shall be set to the power priority configured for the device. If a PD is unable to determine its power priority or it has not been configured, then this field shall be set to unknown(1). When the power type is PSE, this field shall be set to unknown(1). | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.9 | INTEGER {unknown(1), critical(2), high(3), low(4)} | read-write | current |
| arubaWiredLldpXdot3LocPDRequestedPowerValue OBJECT-TYPE It indicates the maximum input average power the PD is requesting in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.10 | Integer32 (0..999) | read-only | current |
| arubaWiredLldpXdot3LocPDRequestedPowerValueA OBJECT-TYPE It indicates the PD requested power value for the Mode A pairset in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.11 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3LocPDRequestedPowerValueB OBJECT-TYPE It indicates the PD requested power value for the Mode B pairset in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.12 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3LocPSEAllocatedPowerValue OBJECT-TYPE It indicates the maximum input average power the PSE expects the PD to draw in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.13 | Integer32 (0..999) | read-only | current |
| arubaWiredLldpXdot3LocPSEAllocatedPowerValueA OBJECT-TYPE It indicates the maximum input average power levels the PSE expects the dual-signature PD to draw, in units of 0.1 W, on Alternative A, when the PSE provides power over 4-pair. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.14 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3LocPSEAllocatedPowerValueB OBJECT-TYPE It indicates the maximum input average power levels the PSE expects the dual-signature PD to draw, in units of 0.1 W, on Alternative B, when the PSE provides power over 4-pair. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.15 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3LocPSEPoweringStatus OBJECT-TYPE This field reflects the existing powering configuration of the PSE and thus indicates that the PSE is using the 'PSE allocated power value' field or is using the 'PSE allocated power value Alternative A' field and 'PSE allocated power value Alternative B' field. For a PD the contents of this attribute are undefined. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.16 | INTEGER {twoPair(1), fourPsinglesigPD(2), fourPdualsigPD(3)} | read-write | current |
| arubaWiredLldpXdot3LocPowerPairsExt OBJECT-TYPE This field indicates the supported PSE Pinout Alternative. For a PD the contents of this attribute are undefined | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.17 | INTEGER {altA(1), altB(2), both(3)} | read-write | current |
| arubaWiredLldpXdot3LocPowerClassExtA OBJECT-TYPE For a dual-signature PD, it indicates the requested Class for Mode A during Physical Layer Classification. For a single-signature PD, a read-only value set to 'singlesig'. For a PSE connected to a dual-signature PD, a read-only value that indicates the currently assigned Class for Mode A. For a PSE connected to a single-signature PD, or a PSE that operates only in 2-pair mode, the value is set to 'singlesig' | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.18 | INTEGER {singlesig(1), class1(2), class2(3), class3(4), class4(5), class5(6)} | read-write | current |
| arubaWiredLldpXdot3LocPowerClassExtB OBJECT-TYPE For a dual-signature PD, it indicates the requested Class for Mode B during Physical Layer Classification. For a single-signature PD, a read-only value set to 'singlesig'. For a PSE connected to a dual-signature PD, a read-only value that indicates the currently assigned Class for Mode B. For a PSE connected to a single-signature PD, or a PSE that operates only in 2-pair mode, the value is set to 'singlesig' | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.19 | INTEGER {singlesig(1), class1(2), class2(3), class3(4), class4(5), class5(6)} | read-write | current |
| arubaWiredLldpXdot3LocPowerClassExt OBJECT-TYPE For a single-signature PD, it indicates the requested Class during Physical Layer Classification. For a dual-signature PD, the value is set to 'dualsig'. For a PSE connected to a single-signature PD or a PSE that operates only in 2-pair mode, a readonly value that indicates the currently assigned Class. For a PSE connected to a dualsignature PD, a read-only value set to 'dualsig'. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.20 | INTEGER {dualsig(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8), class8(9)} | read-write | current |
| arubaWiredLldpXdot3LocPowerTypeExt OBJECT-TYPE This field indicates if the local system is a Type 3 or Type 4 PSE or PD, and in the case of a Type 3 or Type 4 PD, if it is a single-signature PD or a dual-signature PD | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.21 | INTEGER {type3PSE(1), type4PSE(2), type3singlesigPD(3), type3dualsigPD(4), type4singlesigPD(5), type4dualsigPD(6)} | read-only | current |
| arubaWiredLldpXdot3LocPDLoad OBJECT-TYPE The truth value used to indicate whether the load of a dual- signature PD is electrically isolated. For a single-signature PD, or a PSE, the value of this attribute is FALSE. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.22 | TruthValue | read-only | current |
| arubaWiredLldpXdot3LocPSEMaxAvailPower OBJECT-TYPE It indicates the local PSE maximum available power value in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.23 | Integer32 (0..999) | read-only | current |
| arubaWiredLldpXdot3LocPSEAutoclassSupport OBJECT-TYPE It indicates whether the local PSE system supports Autoclass | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.24 | TruthValue | read-only | current |
| arubaWiredLldpXdot3LocAutoclassCompleted OBJECT-TYPE It indicates whether the local PSE system has completed the Autoclass measurement | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.25 | TruthValue | read-only | current |
| arubaWiredLldpLocPseTlvSentType OBJECT-TYPE This field specifies the set of TLVs that are actually sent by the PSE | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.26 | INTEGER {med(1), dot3(2), dot3-ext(3)} | read-only | current |
| arubaWiredLldpLocPdTlvSentType OBJECT-TYPE This field specifies the set of TLVs that are actually sent by the PD | 1.3.6.1.4.1.47196.4.1.1.3.9.1.1.1.1.27 | INTEGER {med(1), dot3(2), dot3-ext(3), medanddot3(4), medanddot3-ext(5)} | read-only | current |
| arubaWiredLldpXdot3RemoteData OBJECT-IDENTITY | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2 | |||
| arubaWiredLldpXdot3RemPowerTable OBJECT-TYPE This table contains one row per port of power ethernet information (as a part of the LLDP 802.3bt organizational extension) on the remote system known to this agent. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1 | not-accessible | current | |
| arubaWiredLldpXdot3RemPowerEntry OBJECT-TYPE Information about a particular port component. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1 | not-accessible | current | |
| arubaWiredLldpXdot3RemPowerPortClass OBJECT-TYPE The value that identifies the port Class of the given port associated with the remote system. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.1 | INTEGER {pClassPSE(1), pClassPD(2)} | read-only | current |
| arubaWiredLldpXdot3RemPowerMDISupported OBJECT-TYPE The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.2 | TruthValue | read-only | current |
| arubaWiredLldpXdot3RemPowerMDIEnabled OBJECT-TYPE The truth value used to indicate whether the MDI power is enabled on given port associated with the remote system. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.3 | TruthValue | read-only | current |
| arubaWiredLldpXdot3RemPowerPairControlable OBJECT-TYPE The truth value used to indicate the ability to control which PSE Pinout Alternative is used for PD detection and power. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.4 | TruthValue | read-only | current |
| arubaWiredLldpXdot3RemPowerPairs OBJECT-TYPE The truth value that identifies the PSE Pinout Alternative in use for detecting and supplying power to the PD. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.5 | INTEGER {pairSignal(1), pairSpare(2)} | read-only | current |
| arubaWiredLldpXdot3RemPowerClass OBJECT-TYPE The truth value that indicates the requested Class of the PD. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.6 | INTEGER {class0(1), class1(2), class2(3), class3(4), class4(5)} | read-only | current |
| arubaWiredLldpXdot3RemPowerType OBJECT-TYPE This field reflects the actual remote power type. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.7 | INTEGER {type2PSE(1), type2PD(2), type1PSE(3), type1PD(4)} | read-only | current |
| arubaWiredLldpXdot3RemPowerSource OBJECT-TYPE This field reflects the remote device (PD) requested power source. This field is encoded as pseAndLocal(4) when a PD being powered both locally and by a PSE, to local(3) when the PD being powered locally only, and to pse(2) when the PD is being powered by a PSE | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.8 | INTEGER {unknown(1), pse(2), local(3), pseAndLocal(4)} | read-only | current |
| arubaWiredLldpXdot3RemPowerPriority OBJECT-TYPE This field reflects the requested remote device power priority. When the power type is PD, this field shall be set to the power priority configured for the device. If a PD is unable to determine its power priority or it has not been configured, then this field shall be set to unknown(1). When the power type is PSE, this field shall be set to unknown(1). | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.9 | INTEGER {unknown(1), critical(2), high(3), low(4)} | read-write | current |
| arubaWiredLldpXdot3RemPDRequestedPowerValue OBJECT-TYPE It indicates the maximum input average power the PD is requesting in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.10 | Integer32 (0..999) | read-only | current |
| arubaWiredLldpXdot3RemPDRequestedPowerValueA OBJECT-TYPE It indicates the PD requested power value for the Mode A pairset in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.11 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3RemPDRequestedPowerValueB OBJECT-TYPE It indicates the PD requested power value for the Mode B pairset in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.12 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3RemPSEAllocatedPowerValue OBJECT-TYPE It indicates the PSE allocated power value received from the remote system. For a PSE, it is the PSE allocated power value that was echoed back by the remote PD, in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.13 | Integer32 (0..999) | read-only | current |
| arubaWiredLldpXdot3RemPSEAllocatedPowerValueA OBJECT-TYPE It indicates the PSE allocated power value for the Alternative A pairset received from the remote system. For a PSE, it is the PSE allocated power value for the Alternative A pairset that was echoed back by the remote PD, in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.14 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3RemPSEAllocatedPowerValueB OBJECT-TYPE It indicates the PSE allocated power value for the Alternative B pairset received from the remote system. For a PSE, it is the PSE allocated power value for the Alternative A pairset that was echoed back by the remote PD, in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.15 | Integer32 (0..499) | read-only | current |
| arubaWiredLldpXdot3RemPDPoweredStatus OBJECT-TYPE This field indicates the existing powered configuration of the PD and thus indicate that the PD is using the 'PD requested power value' field or is using the 'PD requested power value Mode A' field and the 'PD requested power value Mode B' field. For a PSE the contents of this attribute are undefined. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.16 | INTEGER {singlesigPD(1), twoPdualsigPD(2), fourPdualsigPD(3)} | read-write | current |
| arubaWiredLldpXdot3RemPowerClassExtA OBJECT-TYPE For a dual-signature PD, a read-only value that indicates the currently assigned Class for Mode A by the remote 4-pair PSE. For a single-signature PD, or a dual-signature PD connected to a 2-pair only PSE, a read-only value set to 'singlesig' by the remote PSE. For a PSE connected to a dualsignature PD, a read-only value that indicates the requested Class for Mode A during Physical Layer classification by the remote PD. For a PSE connected to a single-signature PD, a read-only value set to 'singlesig' by the remote PD | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.17 | INTEGER {singlesig(1), class1(2), class2(3), class3(4), class4(5), class5(6)} | read-write | current |
| arubaWiredLldpXdot3RemPowerClassExtB OBJECT-TYPE For a dual-signature PD, a read-only value that indicates the currently assigned Class for Mode A by the remote 4-pair PSE. For a single-signature PD, or a dual-signature PD connected to a 2-pair only PSE, a read-only value set to 'singlesig' by the remote PSE. For a PSE connected to a dualsignature PD, a read-only value that indicates the requested Class for Mode B during Physical Layer classification by the remote PD. For a PSE connected to a single-signature PD, a read-only value set to 'singlesig' by the remote PD. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.18 | INTEGER {singlesig(1), class1(2), class2(3), class3(4), class4(5), class5(6)} | read-write | current |
| arubaWiredLldpXdot3RemPowerClassExt OBJECT-TYPE For a single-signature PD or a dual-signature PD connected to a 2-pair only PSE, a read-only value that indicates the currently assigned Class by the remote PSE. For a dual- signature PD connected to a 4-pair capable PSE, a read-only value set to 'dualsig' by the remote PSE. For a PSE connected to a single-signature PD, a read-only value that indicates the requested Class during Physical Layer classification by the remote PD. For a PSE connected to a dual-signature PD, a readonly value set to 'dualsig' by the remote PD. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.19 | INTEGER {dualsig(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8), class8(9)} | read-write | current |
| arubaWiredLldpXdot3RemPowerTypeExt OBJECT-TYPE This field indicates if the remote system is a Type 3 or Type 4 PSE or PD, and in the case of a Type 3 or Type 4 PD, if it is a single-signature PD or dual-signature PD | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.20 | INTEGER {type3PSE(1), type4PSE(2), type3singlesigPD(3), type3dualsigPD(4), type4singlesigPD(5), type4dualsigPD(6)} | read-only | current |
| arubaWiredLldpXdot3RemPDLoad OBJECT-TYPE The truth value used to indicate whether the load of the remote dual-signature PD is electrically isolated. For a PD this attribute is set to FALSE | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.21 | TruthValue | read-only | current |
| arubaWiredLldpXdot3RemPD4PID OBJECT-TYPE The truth value used to indicate whether the remote PD system supports powering of both PD Modes | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.22 | TruthValue | read-only | current |
| arubaWiredLldpXdot3RemPSEMaxAvailPower OBJECT-TYPE It indicates the remote PSE maximum available power value in units of 0.1 W. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.23 | Integer32 (0..999) | read-only | current |
| arubaWiredLldpXdot3RemAutoclassRequest OBJECT-TYPE It indicates whether the remote PD system is requesting an Autoclass measurement | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.24 | TruthValue | read-only | current |
| arubaWiredLldpXdot3RemPowerDownRequest OBJECT-TYPE It indicates that the remote PD system is requesting a power down when the value is 0x1D | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.25 | INTEGER | read-only | current |
| arubaWiredLldpXdot3RemPowerDownTime OBJECT-TYPE It indicates the number of seconds the remote PD requests to stay powered off. A value of zero indicates an indefinite amount of time. | 1.3.6.1.4.1.47196.4.1.1.3.9.1.2.1.1.26 | INTEGER | read-only | current |
| arubaWiredLldpConformance OBJECT-IDENTITY | 1.3.6.1.4.1.47196.4.1.1.3.9.2 | |||
| arubaWiredLldpCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.47196.4.1.1.3.9.2.1 | |||
| arubaWiredLldpGroups OBJECT-IDENTITY | 1.3.6.1.4.1.47196.4.1.1.3.9.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| arubaWiredLldpXdot3Compliance MODULE-COMPLIANCE The compliance statement for LLDP implementation. | 1.3.6.1.4.1.47196.4.1.1.3.9.2.1.1 | current |
| arubaWiredLldpXdot3LocSysGroup OBJECT-GROUP The collection of objects which are used to represent LLDP 802.3 organizational extension for POEP Local Device Information. This group is mandatory for agents which implement the LLDP 802.3 organizational extension for POEP. | 1.3.6.1.4.1.47196.4.1.1.3.9.2.2.1 | current |
| arubaWiredLldpXdot3RemSysGroup OBJECT-GROUP The collection of objects which are used to represent LLDP 802.3 organizational extension for POEP Remote Device Information. This group is mandatory for agents which implement the LLDP 802.3 organizational extension for POEP. | 1.3.6.1.4.1.47196.4.1.1.3.9.2.2.2 | current |