MIBs Depot

ALCATEL-IND1-OSPF3-MIB

Registered at
1.3.6.1.4.1.6486.801.1.2.1.10.13.1
Last updated
2022-07-05 00:00
Organization
ALE USA Inc.
Revisions
2022-07-05 00:00, 2019-11-27 00:00, 2014-10-06 00:00, 2007-04-03 00:00
Namespace
alcatel-aos7
Source file
ALCATEL-IND1-OSPF3-MIB
Digest
sha256:9fae7d7516dcc3aa29ae29cd197eb36d7d7240a3200972b549165ca6ac56d163

Description

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of OSPFv3 global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, o r consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) ALE USA Inc. 2014-2019 Copyright (C) 1995-2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE

Contact

Please consult with Customer Service to ensure the most appropriate version of this document is used with the products in question: ALE USA Inc. Enterprise 26801 West Agoura Road Agoura Hills, CA 91301-5122 United States Of America Telephone: +1 800 995 2696 Electronic Mail: ebg_global_supportcenter@al-enterprise.com World Wide Web: https://www.al-enterprise.com

Imports

FromSymbols
ALCATEL-IND1-BASEroutingIND1Ospf3
INET-ADDRESS-MIBInetAddress, InetAddressType
IPV6-TCIpv6Address, Ipv6IfIndexOrZero
OSPFV3-MIBospfv3AreaEntry, ospfv3IfEntry
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIGauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ALCATEL-IND1-BASE
ALCATEL-IND1-OSPF3-MIB
IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
IPV6-TC
OSPF-MIB
OSPFV3-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC

Objects

NameOIDSyntaxAccessStatus
alcatelIND1OSPF3MIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1
alaProtocolOspf3
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1
alaOspf3OrigRouteTag
OBJECT-TYPE
Route tag that is originated with ASEs
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.1Unsigned32read-writecurrent
alaOspf3TimerSpfDelay
OBJECT-TYPE
Delay (in seconds) between topology change and SPF run
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.2Integer32 (0..65535)read-writecurrent
alaOspf3TimerSpfHold
OBJECT-TYPE
Delay (in seconds) between subsequent SPF executions
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.3Integer32 (0..65535)read-writecurrent
alaOspf3RestartHelperSupport
OBJECT-TYPE
This router can be a helper to another restarting router
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.4INTEGER {enable(1), disable(2)}read-writecurrent
alaOspf3RestartStrictLsaChecking
OBJECT-TYPE
Will changed LSA result in restart termination
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.5INTEGER {enable(1), disable(2)}read-writedeprecated
alaOspf3RestartInitiate
OBJECT-TYPE
Start a planned graceful restart
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.6INTEGER {enable(1), disable(2)}read-writecurrent
alaOspf3MTUCheck
OBJECT-TYPE
Verify the MTU of a neighbor matches our own.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.7INTEGER {enable(1), disable(2)}read-writecurrent
alaOspf3RouteTable
OBJECT-TYPE
OSPF3 Routing table. This table contains an entry for each valid OSPF unicast route that can be used for packet forwarding determination. It is for display purposes only.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8not-accessiblecurrent
alaOspf3RouteEntry
OBJECT-TYPE
A routing entry.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1not-accessiblecurrent
alaOspf3RouteDest
OBJECT-TYPE
The destination IPv6 address of this route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.1Ipv6Addressnot-accessiblecurrent
alaOspf3RoutePfxLength
OBJECT-TYPE
Indicates the prefix length of the destination address.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.2Integer32 (0..128)not-accessiblecurrent
alaOspf3RouteNextHop
OBJECT-TYPE
On remote routes, the address of the next system en route; otherwise, ::0 ('00000000000000000000000000000000'H in ASN.1 string representation).
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.3Ipv6Addressnot-accessiblecurrent
alaOspf3RouteIfIndex
OBJECT-TYPE
The index value which uniquely identifies the local interface through which the next hop of this route should be reached.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.4Ipv6IfIndexOrZeronot-accessiblecurrent
alaOspf3RouteType
OBJECT-TYPE
The type of this route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.5INTEGER {host(1), other(2)}read-onlycurrent
alaOspf3RoutePathType
OBJECT-TYPE
The routing metric path type for this route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.6INTEGER {intraArea(1), interArea(2), externalType1(3), externalType2(4)}read-onlycurrent
alaOspf3RouteMetric1
OBJECT-TYPE
The primary routing metric for this route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.7Unsigned32read-onlycurrent
alaOspf3RouteMetric2
OBJECT-TYPE
An alternate routing metric for this route. It's 0 for internal routes. For an external route, it's the metric to reach the ASBR that announced the external route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.8.1.8Unsigned32read-onlycurrent
alaOspf3BfdStatus
OBJECT-TYPE
Enables or disables bfd for OSPF protocol
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.9INTEGER {enable(1), disable(2)}read-writecurrent
alaOspf3BfdAllInterfaceStatus
OBJECT-TYPE
Enables or disables bfd for all OSPF interfaces
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.10INTEGER {enable(1), disable(2)}read-writecurrent
alaOspf3IfAugTable
OBJECT-TYPE
Expansion for ospf3IfTable
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11not-accessiblecurrent
alaOspf3IfAugEntry
OBJECT-TYPE
An entry of alaOspf3IfAugTable
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1not-accessiblecurrent
alaOspf3IfBfdStatus
OBJECT-TYPE
Enables/Disables OSP3F for a BFD interface
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1.1INTEGER {enable(1), disable(2)}read-createcurrent
alaOspf3IfBfdDrsOnly
OBJECT-TYPE
Enables/Disables Drs Only option for a BFD interface
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.11.1.2INTEGER {enable(1), disable(2)}read-createcurrent
alaOspf3AreaAugTable
OBJECT-TYPE
This table extends the ofpv3 area table and it is used to display very granular LSA Counts, Host and Interface counts
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12not-accessiblecurrent
alaOspf3AreaAugEntry
OBJECT-TYPE
An entry of alaOspf3AreaAugTable
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1not-accessiblecurrent
alaOspf3AreaRouterLsaCount
OBJECT-TYPE
This object indicates the Router LSA Count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.1Gauge32read-onlycurrent
alaOspf3AreaNetworkLsaCount
OBJECT-TYPE
This object indicates the Network LSA Count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.2Gauge32read-onlycurrent
alaOspf3AreaIntraAreaPrefixLsaCount
OBJECT-TYPE
This object indicates the Intra Area LSA Count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.3Gauge32read-onlycurrent
alaOspf3AreaInterAreaPrefixLsaCount
OBJECT-TYPE
This object indicates the Inter area LSA Count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.4Gauge32read-onlycurrent
alaOspf3AreaInterAreaRouterLsaCount
OBJECT-TYPE
This object indicates the inter area Router LSA Count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.5Gauge32read-onlycurrent
alaOspf3AreaHostCount
OBJECT-TYPE
This object indicates the host count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.6Gauge32read-onlycurrent
alaOspf3AreaInterfaceCount
OBJECT-TYPE
This object indicates the Interface count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.7Gauge32read-onlycurrent
alaOspf3AreaSummarizationRangeCount
OBJECT-TYPE
This object indicates the summarization range count.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.12.1.8Gauge32read-onlycurrent
alaOspf3RestartHelperStatus
OBJECT-TYPE
Indicates whether this OSPF router is operating as a Helper to a restarting router.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.13INTEGER {notHelping(1), helping(2)}read-onlycurrent
alaOspf3BorderRouterTable
OBJECT-TYPE
OSPF3 Routing table which allows collections of contiguous networks and hosts to be grouped together.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14not-accessiblecurrent
alaOspf3BorderRouterEntry
OBJECT-TYPE
OSPF3 Routing table which allows collections of contiguous networks and hosts to be grouped together.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1not-accessiblecurrent
alaOspf3BorderRouterAreaIdType
OBJECT-TYPE
The IP address type of the area to which the border router belongs to. InetAddressIPv4 (1) type is supported.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.1InetAddressType {ipv4(1)}not-accessiblecurrent
alaOspf3BorderRouterAreaId
OBJECT-TYPE
The area to which the border router belongs to.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.2InetAddressnot-accessiblecurrent
alaOspf3BorderRouterIdType
OBJECT-TYPE
The IP address type of the router idenitifer of this border router. InetAddressIPv4 (1) type is supported.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.3InetAddressType {ipv4(1)}not-accessiblecurrent
alaOspf3BorderRouterId
OBJECT-TYPE
The router idenitifer of this border router.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.4InetAddressnot-accessiblecurrent
alaOspf3BorderRouterPathType
OBJECT-TYPE
The routing metric path type for this route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.5INTEGER {intraArea(1), interArea(2), externalType1(3), externalType2(4)}not-accessiblecurrent
alaOspf3BorderRouterNextHopType
OBJECT-TYPE
The IP address type of the address of the next hop to reach this border router. InetAddressIPv6 (2) type is supported.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.6InetAddressType {ipv6(2)}not-accessiblecurrent
alaOspf3BorderRouterNextHop
OBJECT-TYPE
The address of the next hop to reach this border router.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.7InetAddressnot-accessiblecurrent
alaOspf3BorderRouterMetric
OBJECT-TYPE
The cost to reach the border router.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.8Integer32 (0..65535)read-onlycurrent
alaOspf3BorderRouterType
OBJECT-TYPE
The type of border router.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.14.1.9INTEGER {abr(1), asbr(2), abrAsbr(3)}read-onlycurrent
alaOspf3DefaultOriginate
OBJECT-TYPE
Indicates whether this ASBR router originates the default route into the OSPFv3 normal area(s). If set to 'only', the default route is advertised into the OSPFv3 normal area, provided the ASBR has a route to 0.0.0.0/0 in its routing table. Alternatively, if set to 'always', a default route is advertised into the OSPFv3 domain regardless of whether the ASBR has a route to 0.0.0.0/0. A value of 'none' has the effect of not originating the default route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.15INTEGER {none(1), only(2), always(3)}read-writecurrent
alaOspf3DefaultOriginateMetricType
OBJECT-TYPE
Type of metric to be used with the default route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.16INTEGER {type1(1), type2(2)}read-writecurrent
alaOspf3DefaultOriginateMetric
OBJECT-TYPE
Default metric to be used for the default route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.1.1.17Integer32 (1..65535)read-writecurrent
alcatelIND1OSPF3MIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2
alcatelIND1OSPF3MIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.1
alcatelIND1OSPF3MIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2

Conformance

NameOIDStatus
alcatelIND1OSPF3MIBCompliance
MODULE-COMPLIANCE
The compliance statement for OSPFv3 and implementing the ALCATEL-IND1-OSPF3 MIB.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.1.1current
alaOSPF3ConfigMIBGroup
OBJECT-GROUP
A collection of objects to support management of OSPF3.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.1current
alaOspf3RouteGroup
OBJECT-GROUP
Collection of objects for management of Network Route.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.2current
alaOspf3AreaGroup
OBJECT-GROUP
Collection of objects for management of Router LSAs.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.3current
alaOspf3BorderRouterGroup
OBJECT-GROUP
Collection of objects for management of routes to Border Routers.
1.3.6.1.4.1.6486.801.1.2.1.10.13.1.2.2.4current