A3COM-HUAWEI-FLASH-MAN-MIB
- Registered at
- 1.3.6.1.4.1.43.45.1.6.9
- Last updated
- 2010-06-05 00:00
- Organization
- Hangzhou H3C Tech. Co., Ltd.
- Namespace
- 3com
- Source file
A3COM-HUAWEI-FLASH-MAN-MIB- Digest
sha256:a7dbd66f439036571d443f981f6e09d24f3e2f2ccef7ac05fd49205cd5a41b32
Description
This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.
Contact
Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085
Imports
| From | Symbols |
|---|---|
| A3COM-HUAWEI-OID-MIB | huaweiUtility |
| ENTITY-MIB | PhysicalIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
A3COM-HUAWEI-FLASH-MAN-MIB A3COM-HUAWEI-OID-MIB ENTITY-MIB IANA-ENTITY-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC UUID-TC-MIB
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| H3cFlashOperationStatus TEXTUAL-CONVENTION The status of the specified operation can be one of the following. opInProgress : The operation is in process. opSuccess : The operation has been completed successfully. opInvalid : The command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol : Invalid protocol is specified. opInvalidSourceName : Invalid source file name is specified. opInvalidDestName : Invalid target name is specified. opInvalidServerAddress : Invalid server address is specified. opDeviceBusy : The device is in use and locked by another process. opDeviceOpenError : Invalid device name is specified. opDeviceError : Device read, write or erase error. opDeviceNotProgrammable : Device is read-only but a write or erase operation was specified. opDeviceFull : Device is filled to capacity. opFileOpenError : Invalid file name; file not found in partition. opFileTransferError : File transfer was unsuccessful. opFileChecksumError : File checksum in Flash is invalid. opNoMemory : System is running in low on memory. opUnknownFailure : Failure which is unknown. opDeleteFileOpenError : File is in used by another process. opDeleteInvalidDevice : Invalid device name is specified. opDeleteInvalidFunction : Deleted operation is unsupported by the device. opDeleteOperationError : Operation is in a low error. opDeleteInvalidFileName : Invalid file name is specified. pDeleteDeviceBusy : The device is in use and locked by another process. opDeleteParaError : The parameters are invalid. opDeleteInvalidPath : The file path is invalid. opDeleteFileNotExistInSlave : Failed to delete file, because the file is not exist in the slave. opDeleteFileFailedInSlave : Operation is fail when delete file in the slave. opSlaveFull : Operation is fail for the slave don't have enough space. opCopyToSlaveFailure : Operation is fail when copy file to the slave. | current | |||
| H3cFlashPartitionStatus TEXTUAL-CONVENTION If device is not programmable the value of it will be 'readOnly'; If the current image is running from this partition the value of it will be 'runFromFlash' If device is programmable the value of it will be 'readWrite'. | current | |||
| H3cFlashPartitionUpgradeMode TEXTUAL-CONVENTION Flash partition upgrade method, i.e., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on run-from-Flash systems for upgrading Flash. This feature uses the bootstrap code in ROMs to help in automatic download. This object should be retrieved if the partition status is runFromFlash(2). If the partition status is readOnly(1), the upgrade method would depend on the reason for the readOnly status. For example, it may simply be a matter of installing the programming jumper, or it may require execution of a later version of software that supports the Flash chips. unknown - the current system image does not know how Flash can be programmed. A possible method would be to reload the ROM image and perform the upgrade manually. rxbootFLH - the Flash Load Helper is available to download files to Flash. A copy-to-flash command can be used and this system image will automatically reload the Rxboot image in ROM and direct it to carry out the download request. direct - will be done directly by this image. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| h3cFlashManMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1 | |||
| h3cFlashDevice OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1.1 | |||
| h3cFlhSupportNum OBJECT-TYPE Specifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash in the system and so the value here will be a minimum of 1. | 1.3.6.1.4.1.43.45.1.6.9.1.1.1 | Integer32 | read-only | current |
| h3cFlashTable OBJECT-TYPE This table gives the properties of all the flashes on the system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2 | not-accessible | current | |
| h3cFlashEntry OBJECT-TYPE The entry of h3cFlashTable. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1 | not-accessible | current | |
| h3cFlhIndex OBJECT-TYPE The index of h3cFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random index + + ( bit 16..31 ) ( bit 0..15 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), it has a minimum value of 1, and maximum value of the same as the value of h3cFlhSupportNum. From bit16 to bit31 (two bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.1 | Integer32 (1..2147483647) | read-only | current |
| h3cFlhSize OBJECT-TYPE Specifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.2 | Integer32 | read-only | current |
| h3cFlhPos OBJECT-TYPE The position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is indicated. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.3 | PhysicalIndex | read-only | current |
| h3cFlhName OBJECT-TYPE The flash name within the system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.4 | DisplayString (SIZE(0..255)) | read-only | current |
| h3cFlhChipNum OBJECT-TYPE The chip numbers in the flash. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.5 | Integer32 (1..64) | read-only | current |
| h3cFlhDescr OBJECT-TYPE Description of the purpose of the flash in the system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.6 | DisplayString (SIZE(0..64)) | read-only | current |
| h3cFlhInitTime OBJECT-TYPE The initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable component or a partition, it will be the initialization time. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.8 | TimeStamp | read-only | current |
| h3cFlhRemovable OBJECT-TYPE The value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.9 | TruthValue | read-only | current |
| h3cFlhPartitionBool OBJECT-TYPE The value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.11 | TruthValue | read-write | current |
| h3cFlhMinPartitionSize OBJECT-TYPE Minimum partition size supported. If h3cFlhDevicePartitionBool is false, the value of this object is the same as h3cFlhSize. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.12 | Integer32 | read-only | current |
| h3cFlhMaxPartitions OBJECT-TYPE The maximum count of partitions which the system supports for this flash. If h3cFlhPartitionBool is false, the object value is 1. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.13 | Integer32 (1..8) | read-only | current |
| h3cFlhPartitionNum OBJECT-TYPE The actual number of partitions supported by the system for this flash. If h3cFlhPartitionBool is false, this value is 1. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.14 | Integer32 | read-only | current |
| h3cFlhKbyteSize OBJECT-TYPE Specifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device. | 1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.15 | Integer32 | read-only | current |
| h3cFlashChips OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1.1.3 | |||
| h3cFlhChipTable OBJECT-TYPE Table of properties for all flash chips. Used mainly for diagnostics. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1 | not-accessible | current | |
| h3cFlhChipEntry OBJECT-TYPE The entry of h3cFlhChipTable | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1 | not-accessible | current | |
| h3cFlhChipSerialNo OBJECT-TYPE Index of h3cFlhChipTable. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.1 | Integer32 (1..64) | not-accessible | current |
| h3cFlhChipID OBJECT-TYPE The manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.2 | DisplayString (SIZE(0..5)) | read-only | current |
| h3cFlhChipDescr OBJECT-TYPE The description of the flash chip. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.3 | DisplayString (SIZE(0..32)) | read-only | current |
| h3cFlhChipWriteTimesLimit OBJECT-TYPE The limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.4 | Integer32 | read-only | current |
| h3cFlhChipWriteTimes OBJECT-TYPE A count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after a write operation, and report any errors accordingly. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.5 | Counter32 | read-only | current |
| h3cFlhChipEraseTimesLimit OBJECT-TYPE The limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.6 | Integer32 | read-only | current |
| h3cFlhChipEraseTimes OBJECT-TYPE A count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after an erase operation, and report any errors accordingly. | 1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.7 | Counter32 | read-only | current |
| h3cFlashPartitions OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1.1.4 | |||
| h3cFlhPartitionTable OBJECT-TYPE Properties for the flash partitions. Minimum of one entry in this table. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1 | not-accessible | current | |
| h3cFlhPartitionEntry OBJECT-TYPE An entry of the h3cFlhPartitionTable.Indexed by flash number and partition number. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1 | not-accessible | current | |
| h3cFlhPartIndex OBJECT-TYPE An index which specifies a sequenced partition in the system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.1 | Integer32 (1..8) | not-accessible | current |
| h3cFlhPartFirstChip OBJECT-TYPE The first chip's sequence number in the partition, by which a chip can be indexed in chip table. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.2 | Integer32 (1..64) | read-only | current |
| h3cFlhPartLastChip OBJECT-TYPE The last chip's sequence number in the partition, by which a chip can be indexed in chip table. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.3 | Integer32 (1..64) | read-only | current |
| h3cFlhPartSpace OBJECT-TYPE The total space of the flash partition. The following should be satisfied: h3cFlhPartSpace = n*h3cFlhMinPartitionSize | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.4 | Integer32 | read-only | current |
| h3cFlhPartSpaceFree OBJECT-TYPE The flash partition's free space. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.5 | Gauge32 | read-only | current |
| h3cFlhPartFileNum OBJECT-TYPE The number of all the files in the flash partition. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.6 | Integer32 | read-only | current |
| h3cFlhPartChecksumMethod OBJECT-TYPE The Checksum method which the file system uses. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.7 | INTEGER {simpleChecksum(1), undefined(2), simpleCRC(3)} | read-only | current |
| h3cFlhPartStatus OBJECT-TYPE The flash partition status. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.8 | H3cFlashPartitionStatus | read-only | current |
| h3cFlhPartUpgradeMode OBJECT-TYPE The upgrade mode of the Flash partition | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.9 | H3cFlashPartitionUpgradeMode | read-only | current |
| h3cFlhPartName OBJECT-TYPE The name of the flash partition given by the system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.10 | DisplayString (SIZE(0..255)) | read-only | current |
| h3cFlhPartRequireErase OBJECT-TYPE Shows whether a write operation is conditional on partition erase. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.11 | TruthValue | read-only | current |
| h3cFlhPartFileNameLen OBJECT-TYPE The maximum length of file name supported in the system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.12 | Integer32 (1..256) | read-only | current |
| h3cFlhFiles OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2 | |||
| h3cFlhFileTable OBJECT-TYPE Table of file information. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1 | not-accessible | current | |
| h3cFlhFileEntry OBJECT-TYPE An entry representing a file. Indexed using flash number, partition number, and file number. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1 | not-accessible | current | |
| h3cFlhFileIndex OBJECT-TYPE Index of the table, whose range is from 1 to 2147483647 | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cFlhFileName OBJECT-TYPE A valid file name supported by the file system. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.2 | DisplayString (SIZE(1..255)) | read-only | current |
| h3cFlhFileSize OBJECT-TYPE The file size in bytes excluding the file header of file system. The value should be greater than zero. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.3 | Integer32 | read-only | current |
| h3cFlhFileStatus OBJECT-TYPE The status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.4 | INTEGER {deleted(1), invalidChecksum(2), valid(3)} | read-only | current |
| h3cFlhFileChecksum OBJECT-TYPE The file checksum in the header of file. | 1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.5 | OCTET STRING | read-only | current |
| h3cFlashOperate OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1.2 | |||
| h3cFlhOpTable OBJECT-TYPE Table used to operate flash. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1 | not-accessible | current | |
| h3cFlhOpEntry OBJECT-TYPE Note an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1 | not-accessible | current | |
| h3cFlhOperIndex OBJECT-TYPE Specifies the index of an entry. It is a random value when creating an entry. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.1 | Integer32 (1..2147483647) | not-accessible | current |
| h3cFlhOperType OBJECT-TYPE Specifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash beforehand. net2FlashWithoutErase Copy a file to flash; do not erase flash beforehand. flash2Net Copy a file from flash. delete Delete a file from flash, the file name is specified by h3cFlhOperSourceFile; rename Change a file's name. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.2 | INTEGER {net2FlashWithErase(1), net2FlashWithoutErase(2), flash2Net(3), delete(4), rename(5)} | read-create | current |
| h3cFlhOperProtocol OBJECT-TYPE Specifies the protocol used to transfer file. The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the h3cFlhOperServerAddress needn't be set, the server address can be acquired automatically, the value of h3cFlhOperServerAddress is uncertain during operation. Both member switch and commander switch can use them if they support HGMP v2. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.3 | INTEGER {ftp(1), tftp(2), clusterftp(3), clustertftp(4)} | read-create | current |
| h3cFlhOperServerAddress OBJECT-TYPE The address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by h3cFlhOperSrvAddrRev for it only support IPv4. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.4 | IpAddress | read-create | deprecated |
| h3cFlhOperServerUser OBJECT-TYPE When using ftp to transfer files, the user name must be specified through this node. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.5 | DisplayString | read-create | current |
| h3cFlhOperPassword OBJECT-TYPE Remote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.6 | DisplayString | read-create | current |
| h3cFlhOperSourceFile OBJECT-TYPE Specifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.7 | DisplayString (SIZE(1..255)) | read-create | current |
| h3cFlhOperDestinationFile OBJECT-TYPE Specifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.8 | DisplayString | read-create | current |
| h3cFlhOperStatus OBJECT-TYPE The status of operation. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.9 | H3cFlashOperationStatus | read-only | current |
| h3cFlhOperEndNotification OBJECT-TYPE If the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.10 | TruthValue | read-create | current |
| h3cFlhOperProgress OBJECT-TYPE The progress described as the time taken for the operation. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.11 | TimeTicks | read-only | current |
| h3cFlhOperRowStatus OBJECT-TYPE The row status of this table entry. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.12 | RowStatus | read-create | current |
| h3cFlhOperServerPort OBJECT-TYPE The port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.13 | Integer32 (0..65535) | read-create | current |
| h3cFlhOperFailReason OBJECT-TYPE The failure reasons of operation. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.14 | DisplayString | read-only | current |
| h3cFlhOperSrvAddrType OBJECT-TYPE The type of IP address for h3cFlhOperSrvAddrRev. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.15 | InetAddressType | read-create | current |
| h3cFlhOperSrvAddrRev OBJECT-TYPE The address of remote host acting as server for operation. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.16 | InetAddress | read-create | current |
| h3cFlhOperSrvVPNName OBJECT-TYPE The VPN instance of this operation uses. | 1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.17 | DisplayString | read-create | current |
| h3cFlashNotification OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.1.3 | |||
| h3cFlashMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.2 | |||
| h3cFlhMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.2.1 | |||
| h3cFlashMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.43.45.1.6.9.2.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| h3cFlhOperNotification NOTIFICATION-TYPE A h3cFlhOperNotification is sent at the completion of a flash copy operation if h3cFlhOperEndNotification is true. | 1.3.6.1.4.1.43.45.1.6.9.1.3.1 | current |
Conformance
| Name | OID | Status |
|---|---|---|
| h3cFlhMIBCompliance MODULE-COMPLIANCE The statement of compliance for those implementing this MIB. | 1.3.6.1.4.1.43.45.1.6.9.2.1.1 | current |
| h3cFlhGroup OBJECT-GROUP A collection of objects on Flash level information. | 1.3.6.1.4.1.43.45.1.6.9.2.2.1 | current |
| h3cFlhChipGroup OBJECT-GROUP A collection of objects on chip level information. | 1.3.6.1.4.1.43.45.1.6.9.2.2.3 | current |
| h3cFlhPartitionGroup OBJECT-GROUP A collection of objects providing on partition level information. | 1.3.6.1.4.1.43.45.1.6.9.2.2.4 | current |
| h3cFlhFileGroup OBJECT-GROUP A collection of objects on file level information. | 1.3.6.1.4.1.43.45.1.6.9.2.2.5 | current |
| h3cFlhOperationGroup OBJECT-GROUP A collection of objects of flash operations. | 1.3.6.1.4.1.43.45.1.6.9.2.2.6 | current |
| h3cFlhNotificationGroup NOTIFICATION-GROUP The collection of notifications in the module | 1.3.6.1.4.1.43.45.1.6.9.2.2.7 | current |