ZhoneDsl-MIB
- Registered at
- 1.3.6.1.4.1.5504.6.3
- Last updated
- 2000-05-11 17:53
- Organization
- Zhone
- Revisions
- 2000-04-26 17:53
- Namespace
- zhone
- Source file
ZhoneDsl-MIB- Digest
sha256:445ca38761d3d14626cdc88842f96040ef3b32529a44e391052e9af8a3a9c42e
Description
The MIB module to describe the Zhone specific implementation of HDSL, HDSL2, SDSL and G.SHDSL
Contact
Postal: xxx Zhone Technologies, Inc. xxx address. Fremont, Ca. Toll-Free: 877-ZHONE20 (+1 877-946-6320) Tel: +1 978-452-0571 Fax: +1 978-xxx-xxxx E-mail: xxx@zhone.com
Imports
| From | Symbols |
|---|---|
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, VariablePointer |
| Zhone | zhoneDsl, zhoneModules |
| Zhone-TC | ZhoneAdminString, ZhoneRowStatus |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC Zhone Zhone-TC ZhoneDsl-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| zhoneDslLineTable OBJECT-TYPE This table contains common attributes describing DSL physical line interfaces for DSLs without a MIB standard. | 1.3.6.1.4.1.5504.5.4.1 | not-accessible | current | |
| zhoneDslLineEntry OBJECT-TYPE An entry in the zhoneDslLine Table. | 1.3.6.1.4.1.5504.5.4.1.1 | not-accessible | current | |
| zhoneDslLineType OBJECT-TYPE The DSL type. Many modem vendors allow software selection between HDSL, HDSL2, SDSL and SHDSL. Using zhoneDslLineTypeSupported the user can see what dsl option is available on this interface. | 1.3.6.1.4.1.5504.5.4.1.1.1 | INTEGER {hdsl(1), hdsl2(2), shdsl(3), sdsl(96)} | read-create | current |
| zhoneDslLineCapabilities OBJECT-TYPE The DSL types supported on this interface. This is a bit-map of possible types. This variable can be used to determine zhoneDslLineType. | 1.3.6.1.4.1.5504.5.4.1.1.2 | Bits {hdsl(1), hdsl2(2), shdsl(4), sdsl(8)} | read-only | current |
| zhoneDslLineStatus OBJECT-TYPE The DSL modem status. Detailed modem state maybe available in the status table. | 1.3.6.1.4.1.5504.5.4.1.1.3 | INTEGER {down(1), downloading(2), activated(3), training(4), up(5)} | read-only | current |
| zhoneDslUpLineRate OBJECT-TYPE The DSL upstream (cpe->co) line rate on this interface. | 1.3.6.1.4.1.5504.5.4.1.1.4 | Gauge32 | read-only | current |
| zhoneDslDownLineRate OBJECT-TYPE The DSL downstream (co->cpe) line rate on this interface. | 1.3.6.1.4.1.5504.5.4.1.1.5 | Gauge32 | read-only | current |
| zhoneDslLineConfigProfile OBJECT-TYPE The value of this object identifies the row in the respective dsl configuration profile table. (Ex: if zhoneDslLineType is HDSL2, then the profile identifies an HDSL2 configuration profile.) It is assumed that all profile names are unique to the system. In the case which the configuration profile has not been set, the value will be set to `ZhoneDefault'. This is a profile (by type) which will be persisted and then able to be modified by a management station in order to modify the DEFAULT values. | 1.3.6.1.4.1.5504.5.4.1.1.6 | ZhoneAdminString | read-create | current |
| zhoneDslLineAlarmProfile OBJECT-TYPE The value of this object identifies the row in the respective dsl alarm profile table. (Ex: if zhoneDslLineType is HDSL2 then the profile identifies an HDSL2 alarm profile.) It is assumed that all profile names are unique to the system. In the case where the configuration profile has not been set, the value will be set to `ZhoneDefault'. | 1.3.6.1.4.1.5504.5.4.1.1.7 | ZhoneAdminString | read-create | current |
| zhoneDslLineRowStatus OBJECT-TYPE Row status in order to add an entry in this table. The required fields to be added are: (ARE ALL THE DEFAULTS OKAY) | 1.3.6.1.4.1.5504.5.4.1.1.8 | ZhoneRowStatus | read-write | current |
| zhoneHdsl2ConfigProfileTable OBJECT-TYPE This table contains information for HDSL2 configuration. | 1.3.6.1.4.1.5504.5.4.3 | not-accessible | current | |
| zhoneHdsl2ConfigProfileEntry OBJECT-TYPE An entry in the zhoneHdsl2ConfigProfile Table. | 1.3.6.1.4.1.5504.5.4.3.1 | not-accessible | current | |
| zhoneHdsl2ConfigProfileName OBJECT-TYPE Configuration profile name. Used by the zhoneHdsl2LineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmically represent the Line's ifIndex. Therefore, the profile's name is a decimal zed string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'. | 1.3.6.1.4.1.5504.5.4.3.1.1 | ZhoneAdminString | not-accessible | current |
| zhoneHdsl2ConfigUnitMode OBJECT-TYPE Unit is configured as the CO(central office)or CPE (customer premise)side. | 1.3.6.1.4.1.5504.5.4.3.1.2 | INTEGER {co(1), cpe(2)} | read-create | current |
| zhoneHdsl2ConfigTransmitPowerbackoffMode OBJECT-TYPE Determines if the transmit power backoff defined in HDSL2 standard is used. | 1.3.6.1.4.1.5504.5.4.3.1.3 | INTEGER {backoff-disable(1), backoff-enable(2), no-change-backoff(3)} | read-create | current |
| zhoneHdsl2ConfigDecoderCoeffA OBJECT-TYPE 21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default. | 1.3.6.1.4.1.5504.5.4.3.1.4 | Integer32 | read-create | current |
| zhoneHdsl2ConfigDecoderCoeffB OBJECT-TYPE 21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default. | 1.3.6.1.4.1.5504.5.4.3.1.5 | Integer32 | read-create | current |
| zhoneHdsl2ConfigFrameSyncWord OBJECT-TYPE 10 bit frame sync word. The default is the HDSL2 standard. | 1.3.6.1.4.1.5504.5.4.3.1.6 | Integer32 | read-create | current |
| zhoneHdsl2ConfigStuffBits OBJECT-TYPE 4 bit stuff pattern. The default is the HDSL2 standard. | 1.3.6.1.4.1.5504.5.4.3.1.7 | Integer32 (0..15) | read-create | current |
| zhoneHdsl2ConfigRowStatus OBJECT-TYPE Status in order to create/delete rows. For creation the following fields are required: | 1.3.6.1.4.1.5504.5.4.3.1.8 | ZhoneRowStatus | read-create | current |
| zhoneHdsl2StatusTable OBJECT-TYPE This table contains HDSL2 specific line status information. An entry into this table is automatically created whenever a zhoneDslLineEntry is created and the type is HDSL2. | 1.3.6.1.4.1.5504.5.4.4 | not-accessible | current | |
| zhoneHdsl2StatusEntry OBJECT-TYPE An entry in the zhoneHdsl2Status Table. | 1.3.6.1.4.1.5504.5.4.4.1 | not-accessible | current | |
| zhoneHdsl2DriftAlarm OBJECT-TYPE Indicates that the framer automatically attempted to adjust for clock drift. This is not applicable for ATM. | 1.3.6.1.4.1.5504.5.4.4.1.1 | INTEGER {rx-clk-alarm(1), tx-clk-alarm(2), tx-rx-clk-alarm(3), no-drift-alarm(4), not-applicable(5)} | read-only | current |
| zhoneHdsl2FramerIBStatus OBJECT-TYPE Returns the segd,sega,uib and losd bits. The format of the octet is: x x x x segd sega uib losd. | 1.3.6.1.4.1.5504.5.4.4.1.2 | OCTET STRING (SIZE(1)) | read-only | current |
| zhoneHdsl2LocalPSDMaskStatus OBJECT-TYPE Returns a number corresponding to the transmit power backoff requested by the local unit. | 1.3.6.1.4.1.5504.5.4.4.1.3 | Integer32 | read-only | current |
| zhoneHdsl2LoopAttenuation OBJECT-TYPE Estimation of the loop attenuation in tenths of a DB. by the local unit. | 1.3.6.1.4.1.5504.5.4.4.1.4 | Integer32 | read-only | current |
| zhoneHdsl2LossWordStatus OBJECT-TYPE This indicates loss of sync. | 1.3.6.1.4.1.5504.5.4.4.1.5 | INTEGER {no-lossw-defect(1), lossw-defect(2)} | read-only | current |
| zhoneHdsl2RmtPSDMaskStatus OBJECT-TYPE Returns a number corresponding to the transmit power backoff requested by the remote unit. | 1.3.6.1.4.1.5504.5.4.4.1.6 | Integer32 | read-only | current |
| zhoneHdsl2RmtCountryCode OBJECT-TYPE ANSI HDSL2 Country code of the remote unit. | 1.3.6.1.4.1.5504.5.4.4.1.7 | Integer32 | read-only | current |
| zhoneHdsl2RmtVersion OBJECT-TYPE HDSL2 version of the remote unit. | 1.3.6.1.4.1.5504.5.4.4.1.8 | Integer32 | read-only | current |
| zhoneHdsl2RmtProviderCode OBJECT-TYPE Provider word of the remote unit. | 1.3.6.1.4.1.5504.5.4.4.1.9 | Integer32 | read-only | current |
| zhoneHdsl2RmtVendorData OBJECT-TYPE The remote unit's vendor-provided data. | 1.3.6.1.4.1.5504.5.4.4.1.10 | OCTET STRING (SIZE(8)) | read-only | current |
| zhoneHdsl2RmtTxEncoderA OBJECT-TYPE The remote unit's 21 bit encoder coefficient A | 1.3.6.1.4.1.5504.5.4.4.1.11 | Integer32 | read-only | current |
| zhoneHdsl2RmtTxEncoderB OBJECT-TYPE The remote unit's 21 bit encoder coefficient B | 1.3.6.1.4.1.5504.5.4.4.1.12 | Integer32 | read-only | current |
| zhoneHdsl2TipRingStatus OBJECT-TYPE Indicates whether the tip and ring points from the local unit match the tip and ring points of the remote. | 1.3.6.1.4.1.5504.5.4.4.1.13 | INTEGER {normal(1), reverse(2)} | read-only | current |
| zhoneHdsl2FrameSyncWord OBJECT-TYPE A 10 bit number indicating the frame sync word used. LSB justified | 1.3.6.1.4.1.5504.5.4.4.1.14 | Integer32 | read-only | current |
| zhoneHdsl2StuffBits OBJECT-TYPE A 4 bit number for the stuff bits. LSB justified. | 1.3.6.1.4.1.5504.5.4.4.1.15 | Integer32 | read-only | current |
| zhoneDslPerfDataTable OBJECT-TYPE This table provides one row for each modem interface. | 1.3.6.1.4.1.5504.5.4.5 | not-accessible | current | |
| zhoneDslPerfDataEntry OBJECT-TYPE An entry in zhoneDslPerfDataTable. | 1.3.6.1.4.1.5504.5.4.5.1 | not-accessible | current | |
| zhoneDslPerfLofs OBJECT-TYPE Count of the number of Loss of Framing failures since agent reset. | 1.3.6.1.4.1.5504.5.4.5.1.1 | Counter32 | read-only | current |
| zhoneDslPerfLoss OBJECT-TYPE Count of the number of Loss of Signal failures since agent reset. | 1.3.6.1.4.1.5504.5.4.5.1.2 | Counter32 | read-only | current |
| zhoneDslPerfLols OBJECT-TYPE Count of the number of Loss of Link failures since agent reset. | 1.3.6.1.4.1.5504.5.4.5.1.3 | Counter32 | read-only | current |
| zhoneDslPerfInits OBJECT-TYPE Count of the line initialization attempts since agent reset. Includes both successful and failed attempts. | 1.3.6.1.4.1.5504.5.4.5.1.4 | Counter32 | read-only | current |
| zhoneDslPerfCur15MinTimeElapsed OBJECT-TYPE The number of seconds elapsed since the start of the current measurement period. | 1.3.6.1.4.1.5504.5.4.5.1.5 | Gauge32 | read-only | current |
| zhoneDslPerfCur15MinLofs OBJECT-TYPE Count of the number of Loss of Framing failures in the current 15 minute interval. | 1.3.6.1.4.1.5504.5.4.5.1.6 | Gauge32 | read-only | current |
| zhoneDslPerfCur15MinLoss OBJECT-TYPE Count of seconds in the current 15 minute interval when there was a Loss of Signal. | 1.3.6.1.4.1.5504.5.4.5.1.7 | Gauge32 | read-only | current |
| zhoneDslPerfCur15MinLols OBJECT-TYPE Count of seconds in the current 15 minute interval when there was of Loss of Link. | 1.3.6.1.4.1.5504.5.4.5.1.8 | Gauge32 | read-only | current |
| zhoneDslPerfCur15MinInits OBJECT-TYPE Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts. | 1.3.6.1.4.1.5504.5.4.5.1.9 | Counter32 | read-only | current |
| zhoneDslAlarmProfileTable OBJECT-TYPE This table contains information for Alarm conditions. One entry in this table reflects a profile defined by a manager which can be used to define alarm conditions for a modem. | 1.3.6.1.4.1.5504.5.4.6 | not-accessible | current | |
| zhoneDslAlarmProfileEntry OBJECT-TYPE An entry in the zhoneDslAlarmProfile Table. | 1.3.6.1.4.1.5504.5.4.6.1 | not-accessible | current | |
| zhoneDslAlarmProfileName OBJECT-TYPE Configuration profile name. Used by the zhoneDslLineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmically represent the Line's ifIndex. Therefore, the profile's name is a decimal zed string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'. | 1.3.6.1.4.1.5504.5.4.6.1.1 | ZhoneAdminString | not-accessible | current |
| zhoneDslThreshold15MinLoss OBJECT-TYPE The number of Loss of signal seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap. | 1.3.6.1.4.1.5504.5.4.6.1.2 | INTEGER (0..900) | read-create | current |
| zhoneDslThreshold15MinLols OBJECT-TYPE The number of Loss of link seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap. | 1.3.6.1.4.1.5504.5.4.6.1.3 | INTEGER (0..900) | read-create | current |
| zhoneDslThreshold15MinLofs OBJECT-TYPE The number of Loss of framing seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap. | 1.3.6.1.4.1.5504.5.4.6.1.4 | INTEGER (0..900) | read-create | current |
| zhoneDslAlarmProfileRowStatus OBJECT-TYPE RowStatus field to control deletion/addition of entries in this table. Minimal fields to be 'set' for a creation is: | 1.3.6.1.4.1.5504.5.4.6.1.5 | ZhoneAdminString | read-write | current |