Zhone-GPON-MIB

TEXTUAL-CONVENTION

This object contains the result code of the last GPON CAC request for the OLT. ok - GPON CAC requrest approved noReq - GPON CAC request has not been performed badParms - Internal error. Bad pointer or index value parameter to a GPON CAC procedure call cfgLookup - Internal error. Failed to look up a config record ( OLT, ONU, traffic profile, etc ) genError - Internal error. Invalid value was found inside a profile so a switch statement failed maxOnuGemPorts - Each ONU supports a limited number of GEM ports maxOltAllocIds - Each OLT supports a limited number of allocIds maxOltDbaAllocIds - Each OLT supports a limited number of DBA-enabled allocIds maxBw - An attempt was made to create a new GEM port or modifying an existing GEM port but the there is no available total bandwidth maxCbrBw - An attempt was made to create a new GEM port or modifying an existing GEM port but the there is no available CBR bandwidth trafficClassChg - An attempt was made to change a GEM port traffic profile index. The change was not allowed because the new traffic profile has a different traffic class dbaStatusChg - An attempt was made to change a GEM port traffic profile index. The change was not allowed because the new traffic profile has a different DBA Enabled status testCreateInvalidParms - GEM Port cannot be created because there are invalid paramater values used to create the GEM Port. testCreateMissingParms - GEM Port cannot be created because there are missing paramater values used to create the GEM Port. testCreateAlreadyExistsIfIndex - GEM Port cannot be created because a GEM Port already exists with the specified ifIndex testCreateAlreadyExistsSSPS - GEM Port cannot be created because a GEM Port already exists with the specified shelf, slot, port and subPort values. testCreateOnuDoesNotExist - GEM Port cannot be created because the specified GEM Port ONU does not exist testCreateOnuNotRegistered - GEM Port cannot be created because the GEM Port ONU has not been registered with the LINERR testCreateCannotFindPrimary - GEM Port cannot be created because the GEM Port Primary OLT cannot be located testCreateCannotAddToSecondary - GEM Port cannot be created on the secondary OLT of an OLT line redundancy group

TEXTUAL-CONVENTION

Onu upgrade state, for queries and reporting.

OBJECT-IDENTITY

OBJECT-TYPE

Configuration parameters that apply to one OLT. This profile is auto-created.

OBJECT-TYPE

One row of the gpon olt config entry table.

OBJECT-TYPE

The ifIndex of the physical olt interface.

OBJECT-TYPE

Maximum round trip propagation delay. Combined with max ONU response time and preassigned delay determins maximum logical PON distance. Default 200 usec for 20 dm.

OBJECT-TYPE

Combined with max rt propagation delay, determins maximum logical PON distance.

OBJECT-TYPE

Combined with max rt propagation delay and max onu response time determines max logical PON distance.

OBJECT-TYPE

Number of loss-of-signal occurrences to trigger alarm.

OBJECT-TYPE

Number of loss-of-frame occurrences to trigger alarm.

OBJECT-TYPE

Number of loss-of-OAM occurrences to trigger alarm.

OBJECT-TYPE

Description.

OBJECT-TYPE

Enables or disables forward error correction.

OBJECT-TYPE

Enable or disable password auto-learn mode.

OBJECT-TYPE

Olt power level. For the Broadlight 3000, values will be rounded down to one of 0, 3, or 6.

OBJECT-TYPE

Number of guard bits for upstream transmission.

OBJECT-TYPE

Working DBA mode.

OBJECT-TYPE

Basic unit in bytes used by all ONUs for DBA reports of their queue occupancy (for piggyback and whole-report DBA only).

OBJECT-TYPE

Interval for upstream bit error rate calculation.

OBJECT-TYPE

Interval used for downstream bit error rate calculation.

OBJECT-TYPE

Threshold is 10**(-N) for signal fail.

OBJECT-TYPE

Threshold is 10**(-N) for signal degrade. Must exceed sf threshold.

OBJECT-TYPE

Indicates whether OLT turns on FEC indication for all Alloc-Id in the Upstream Bandwidth Map.

OBJECT-TYPE

Specifies whether Single Key exchange should be performed during ONU activation process.

OBJECT-TYPE

If closest ONU location is known, GPON_stack uses this value in order to limit the size of the quiet zone.

OBJECT-TYPE

GPON_stack uses this value in order to limit the size of the quiet zone.

OBJECT-TYPE

Defines the number of measurement cycles in the Ranging process.

OBJECT-TYPE

Defines the interval of periodic monitoring on drifts of upstream data.

OBJECT-TYPE

Indicates the limit of upstream data drift.

OBJECT-TYPE

Alloc-ID assignment map cycle length.

OBJECT-TYPE

Size of minimal upstream allocation per frame.

OBJECT-TYPE

Timeout length of Acknowledge message.

OBJECT-TYPE

Indecates a size of unassigned allocation that should be attached to the end of ranging window.

OBJECT-TYPE

The Dynamic Bandwidth Allocation(dba) cycle determines the DBA interval size. Its an integer multiplicant of 2 milli seconds. The range of values for the dba cycle can be between 2ms-10ms.

OBJECT-TYPE

For DBA of SR type, the block size defines the resolution of the status reports per PON link.The default value is 48 bytes.

OBJECT-TYPE

If we receive LOS alarm for a link in Active state, the link state changes to Switch Over Pending state. If the actual switch-over does not happen after this protection-switchover-timeout expires, the link will go back to Active state

OBJECT-TYPE

Used to force the OLT to use the Preamble configuration in the OLT configuration profile. Otherwise the Preamble configuration will be determined at runtime and based on the SFP.

OBJECT-TYPE

Byte number for preamble type 0. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f

OBJECT-TYPE

Byte number for preamble type 1. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f

OBJECT-TYPE

Byte number for preamble type 3 pre-ranging. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f

OBJECT-TYPE

Byte number for preamble type 3 post-ranging. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f

OBJECT-TYPE

Preamble type 3 pattern. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f

OBJECT-TYPE

If in disabled mode, do not report BIP errors, do not disable ONU and do not throw any traps. If in monitorOnly mode, monitor BIP errors and if BIP Error Threshold exceeded, set appropriate zhoneGponOnuStatusWord bits based on the type of BIP errors and throw zhoneGponOnuError trap. If in blockOnError mode, monitor BIP errors and if BIP Error Threshold exceeded, block traffic, disable ONU ranging, set appropriate zhoneGponOnuStatusWord bits based on the type of BIP errors, and throw zhoneGponOnuError and linkDownTrap traps.

OBJECT-TYPE

If the number of BIP errors per sample exceeds this threshold, it is counted as an errored sample.

OBJECT-TYPE

If the number of errored samples exceed this sample threshold, report and disable the onu if in blockOnError mode, otherwise simply report the threshold as being exceeded.

OBJECT-TYPE

If two adjancent errored samples were taken farther apart than this threshold, do not count the earlier sample as an errored sample.

OBJECT-TYPE

Controls detection of rogue ONU on fiber. Values are: 1. detection disabled 2. detect via measurement from rssi process 3. detect via indication from background process. 4. normally off, but switch to rssi mode if rogue is suspected.

OBJECT-TYPE

Frequency in seconds for detection background task.

OBJECT-TYPE

Power level below which to report rssi rogue ONU.

OBJECT-TYPE

Configuration parameters applying to a single onu stacked on an olt. This profile is auto-created.

OBJECT-TYPE

A row in the gpon olt-onu config table.

OBJECT-TYPE

IfIndex of the onu interface stacked on the olt.

OBJECT-TYPE

This is a string of 4 ascii characters representing the vendor ID portion of the onu serial number. Example: 'ZNTS' for Zhone.

OBJECT-TYPE

This is a string of ascii decimal digits representing the vendor-specific portion of the onu serial number.

OBJECT-TYPE

Password (10 bytes).

OBJECT-TYPE

Indicates whether password is auto-learned.

OBJECT-TYPE

Olt power level. For the Broadlight 3000, values will be rounded down to one of 0, 3, or 6.

OBJECT-TYPE

Interval for upstream bit error rate calculation.

OBJECT-TYPE

Interval for downstream bit error rate.

OBJECT-TYPE

Indicates to Broadlight that onu is activated. May not be used.

OBJECT-TYPE

Name of OMCI configuration file for this ONT.

OBJECT-TYPE

This is the name of a Profile that contains OMCI commands which can configure an ONU. It is expected that this Profile contain OMCI commands that configure the Managed Entities (ME) on an ONU.

OBJECT-TYPE

This is the name of a Profile that contains OMCI commands which can configure an ONU. It is expected that this Profile contain generic commands that are common to multiple ONUs.

OBJECT-TYPE

If enabled, then an asynchronous notification from the ONT with ME class ONT-G triggers an omciOnuAlarms trap. The alarm conditions for this ME class are: equipment alarm, powering alarm, battery missing, battery failure, battery low, physical intrusion alarm, and self-test failure.

OBJECT-TYPE

If enabled, then an asynchronous notification from the ONT with ME class other than ONT-G triggers an omciOnuAlarms trap.

OBJECT-TYPE

If enabled, then gponOnuLineStatusChange traps, and also LinkUp/LinkDown traps, are sent whenever line status changes between up and down. If disabled, none of these traps is sent. If auto, then line status traps are sent if the 'dying gasp' flag is on (for line down), or if the 'dying gasp' flag was on (for line up). Link down/up traps are not sent.

OBJECT-TYPE

If enabled, then the ONU s/w will be upgraded if the ONU version does not match the assoicated remote upgrade profile. Changing this variable to disabled will not abort a remote software upgrade already in progress.

OBJECT-TYPE

This is a string of ascii decimal digits representing the vendor-specific portion of the onu serial number in hex format ( FSAN ).

OBJECT-TYPE

If enabled, and if the onu is activated, then when an ONT is discovered with a registration ID that matches this ONU's password field, then the ONU will be auto-assigned to that ONT.

OBJECT-TYPE

Model ID returned from this Onu.

OBJECT-TYPE

This object defines the version of the ONT as defined by the vendor. The character value '0' indicates that the version information is not available or applicable.

OBJECT-TYPE

Version information for the active s/w image.

OBJECT-TYPE

Version information for the standby s/w image.

OBJECT-TYPE

If in disabled mode, do not report Upstream Onu Rx Power errors, do not disable ONU and do not throw any traps. If in monitorOnly mode, monitor Upstream Onu Rx Power levels and if level is outside of thresholds, set appropriate zhoneGponOnuStatusWord bits and throw zhoneGponOnuError trap. If in blockOnError mode, monitor Upstream Onu Rx Power levels and if level is outside of thresholds, block traffic, disable ONU ranging, set appropriate zhoneGponOnuStatusWord bits and throw both zhoneGponOnuError and linkDownTrap traps.

OBJECT-TYPE

Upstream Receive Power High Threshold value.

OBJECT-TYPE

Upstream Receive Power Low Threshold value.

OBJECT-TYPE

There are two types of DBA, Status Reporting and Non Status Reporting. The value is enabled or disabled. The default is disabled.

OBJECT-TYPE

If the MIB data sync value returned from the ONU on a MIB audit matches the MXK value, config not required.

OBJECT-TYPE

If the SNMP provisioning change value returned from the CPE matches the MXK value, config not required.

OBJECT-TYPE

Next available GEM PORT for the ONU.

OBJECT-TYPE

Track whether the ONU has been auto-configured.

OBJECT-TYPE

Based on the severity set in this field LinkUp/LinkDown alarms are raised.

OBJECT-TYPE

The gpon port is similiar to VCLs in ATM. Data is transferred between OLT and ONU via ports. This profile is dynamically created during CLI bridge-add, host-add, interface-add commands but must be explicitly created during SNMP operation. GEM ports can be created using a supplied I/F index value or using the next available I/F index value. Since the GEM Port is a virtual device, ZMS prefers to supply the I/F index value because ZMS cannot lookup the newly created GEM port using shelf/slot/olt/port indexing ( virual devices do not support these values). How to create a GEM port using next available I/F Index value, using a single SNMP packet with multiple var-binds: 1. Do an SNMP-Next of the object ifIndexNext to determine the I/F index value of the new GEM port. The SNMP-Next will not result in the auto-increment of ifIndexNext. 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.1 = create zhoneGponPortConfigRowShelf.1 = 1 zhoneGponPortConfigRowSlot.1 = GEM port slot zhoneGponPortConfigRowOlt.1 = GEM port OLT zhoneGponPortConfigRowPort.1 = GEM Port ID value zhoneGponPortConfigRowTrafficProfile.1 = traffic profile The GEM port will be created using the next available ifIndex. How to create a GEM port with a specified I/F index value, using a single SNMP packet with multiple var-binds: 1. Do an SNMP-Get of the object ifIndexNext to determine the next available I/F index value. The SNMP-Get will result in the auto-increment of ifIndexNext. 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.aaa = create zhoneGponPortConfigRowShelf.aaa = 1 zhoneGponPortConfigRowSlot.aaa = GEM port slot zhoneGponPortConfigRowOlt.aaa = GEM port OLT zhoneGponPortConfigRowPort.aaa = GEM Port ID value zhoneGponPortConfigRowTrafficProfile.aaa = traffic profile where aaa is the I/F index value collected in step 1. A GEM Port cannot be created if an I/F translate record already exists using the supplied I/F index value. How to delete a GEM port using a single SNMP packet: 1. Determine I/F index of GEM port config profile (aaa) 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.aaa = destroy Special Notes: 1. The deletion of a GEM port will be prevented if the GEM port supports bridges, interfaces, etc. 2. The GEM port ID value determines the GEM port ONU.

OBJECT-TYPE

A row in the gpon port config table.

OBJECT-TYPE

The ifIndex of the gpon-port interface stacked on the olt.

OBJECT-TYPE

The row status for the port config table.

OBJECT-TYPE

Specifies whether this is a multicast or unicast port. If unicast, only one onu may be given, and the unicast-onu-id field is used. If multicast is true, then the multicast-onu-ids is used to name the onus.

OBJECT-TYPE

Specifies whether port-id PLOAM messages are encrypted. Must be false if multicast.

OBJECT-TYPE

Direction of data for this port.

OBJECT-TYPE

Index of GEM Port traffic profile for this port. A zero value indicates no GEM Port traffic profile has been selected.

OBJECT-TYPE

This is a WRITE-ONLY variable used during port create/delete operations.

OBJECT-TYPE

This is a WRITE-ONLY variable used during port create/delete operations.

OBJECT-TYPE

This is a WRITE-ONLY variable used during port create/delete operations.

OBJECT-TYPE

This is a WRITE-ONLY variable used during port create/delete operations.

OBJECT-TYPE

This is a WRITE-ONLY variable used during port create/delete operations.

OBJECT-TYPE

The subPort of the ONU on which this GEM port is to be stacked. This is a write-only variable during row create.

OBJECT-TYPE

This object points to the associated Traffic Management profile. If there is no traffic control for the GEM port, set it to 0.

OBJECT-TYPE

Table for management of upstream bandwidth

OBJECT-TYPE

Entry in the gpon allocId table.

OBJECT-TYPE

An Id number which must be unique for a given OLT.

OBJECT-TYPE

Row status for the gpon alloc-id table.

OBJECT-TYPE

The onu number for this olt to which we are allocating bandwidth. Cannot be greater than number of onus for the olt. This field cannot be changed once the alloc-id has been created.

OBJECT-TYPE

Bandwidth guaranteed by this alloc-id. This value is specified in kilobits per second. Only multiples of 512 are allowed, and the value may not exceed 2621440 (i.e. 2.5 gigabits per second).

OBJECT-TYPE

Whether traffic is Constant Bit Rate or Unspecified Bit Rate.

OBJECT-TYPE

For CBR, indicates whether compensated.

OBJECT-TYPE

Table of discovered serial numbers available for assignment to onus.

OBJECT-TYPE

Row in the Gpon onu serial number table

OBJECT-TYPE

Linegroup ifIndex of the Olt on which serial number was discovered.

OBJECT-TYPE

An identifying number, unique within olt, for this discovered onu serial number.

OBJECT-TYPE

The 4-character vendor id portion of serial number.

OBJECT-TYPE

Vendor specific portion of the unassigned onu serial number, a string of decimal digits.

OBJECT-TYPE

Time, as ascii string, that the serial number was discovered.

OBJECT-IDENTITY

Place-holder object for gpon traps, which must have a final digit of 0 in OID.

OBJECT-IDENTITY

Traps raised by Gpon Rp.

OBJECT-TYPE

Current status of onu as reported from Gpon driver.

OBJECT-TYPE

Row in the zhoneGponOnuStatusTable.

OBJECT-TYPE

Bit-encoded current onu status from gpon driver

OBJECT-TYPE

Current configuration status for ONU. 1. queued for configuration (waiting) 2. transitional state before configuration (pending) 3. in process of configuration (config) 4. unspecified error (error) 5. configuration successful (done) 6. image download in progress (download) 7. image download aborted (aborted) 8. state cannot be determined (unknown) 9. ONU is down (down) 10. no configuration has been attempted (noConfig) 11. ONU unreachable for RG configuration (rgComError) 12. Some RG commands failed, may impact service (rgServiceSetupErr) 13. OMCI configuration failed (omciFailed) 14. OMCI failed and also ONU unreachable for RG (omciErrAndRgComErr) 15. OMCI failed and also RG commands failed (omciErrAndRgServErr) 16. Some post-config commands failed (postCfgError) 17. OMCI failed and also some post-config commands failed (omciErrAndPostCfgErr)

OBJECT-TYPE

RSSI power of the SFP per ONU. The value is in tenths of dB.

OBJECT-TYPE

Rx Power as reported by the ONT. The value is in tenths of dB.

OBJECT-TYPE

This object defines the version of the ONT as defined by the vendor. The character value '0' indicates that the version information is not available or applicable.

OBJECT-TYPE

Distance from Olt to Ont in meters, as computed from Eqd.

OBJECT-TYPE

Table containing the OMCI commands for the Managed Entities (ME) on an ONU. The following 'how to' examples demonstrate access of the object zhoneOnuOmciMEOmciCommands. How to create ME profile: 1. Determine ME profile instance <aaa> 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = create zhoneOnuOmciMEProfileName.aaa = ME profile name zhoneOnuOmciMEProfileFilename.aaa = <filename> How to update existing ME profile from a file: 1. Determine ME profile instance <aaa> 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = import zhoneOnuOmciMEProfileName.aaa = ME profile name zhoneOnuOmciMEProfileFilename.aaa = <filename> How to extract ME profile into a file: 1. Determine ME profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = export zhoneOnuOmciMEProfileFilename.aaa = <filename> 3. The file <filename> now exists on uplink file system How to delete ME profile: 1. Determine ME profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = destroy

OBJECT-TYPE

Row in the ME Profile table.

OBJECT-TYPE

A unique index for each row entry (1..n).

OBJECT-TYPE

Row status for the Me profile entry. Not really used for the configuration on the ONUs

OBJECT-TYPE

Name given to each row entry in the ME Profile table. The name must contain ascii printable characters and cannot contain blanks or forward-slash characters. The name must be null-terminated and the null character is included in the object data length. The name must be unique in the ME profiles.

OBJECT-TYPE

Contains the set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss. This object cannot be accessed directly. See the comments section for zhoneOnuCmciMEProfileTable on how to acces this object.

OBJECT-TYPE

Name of file to be loaded into profile. This object is write-only and is not preserved.

OBJECT-TYPE

Table containing Generic OMCI commands for an ONU. The Generic profile is 'created' from an existing ME profile. During this operation, the 'variable' defintions from the ME profile are extracted from the ME profile and placed into the Generic profile. The Generic profile is 'updated' from a file placed into the uplink's file system. The following 'how to' examples demonstrate access of the object zhoneOnuOmciGenericOmciCommands. How to create Generic profile from ME profile: 1. Determine Generic profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = create zhoneOnuOmciGenericProfileName.aaa = profile name zhoneOnuOmciGenericProfileMESrcProfileName = ME profile source 3. Profile is now created and the profile will not contain any variables and values. How to update existing Generic profile from a file: 1. Determine Generic profile instance <aaa> 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = import zhoneOnuOmciGenericProfileFileName.aaa = <filename> How to extract Generic profile into a file: 1. Determine ME profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = export zhoneOnuOmciGenericProfileFilename.aaa = <filename> 3. The file <filename> now exists on uplink file system How to delete Generic profile: 1. Determine Generic profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = destroy

OBJECT-TYPE

Row in the OMCI Generic Profile table

OBJECT-TYPE

A unique index for each row entry ( 1..n ).

OBJECT-TYPE

Row status for the Generic profile entry. Not really used for the configuration of the ONUs

OBJECT-TYPE

Name given to each row entry in the Generic Profile table. The name must contain ascii printable characters and cannot contain blanks or forward-slash characters. The name must be null-terminated and the null character is included in the object data length. The name must be unique in the Generic profiles.

OBJECT-TYPE

Contains the generic set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss.

OBJECT-TYPE

Name of ME profile used to create the Generic profile. The value for this object is only initialized when the profile is created.

OBJECT-TYPE

Name of file to be loaded into profile. This object is write-only and is not preserved.

OBJECT-TYPE

Table containing Specific OMCI commands for an ONU. The Specific profile is 'created' from existing ME and Generic profiles. During this operation, the 'variable' defintions from the ME and Generic profile are extracted from the profiles and placed into the Specific profile. The ME and Generic profile names are extracted from the ONU's Olt/Onu config profile. The Specific profile is 'updated' from a file placed into the uplink's file system. The following 'how to' examples demonstrate access of the object zhoneOnuOmciSpecificOmciCommands. How to create Specific profile from ME and Generic profiles: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciSpecificProfileRowStatus.aaa = create zhoneOnuOmciSpecificProfileFileName = <filename> 3. The profile is now created and the omciCommands contents have been placed into <filename>. The name of the ME profile used to create the Speofic profile is installed into zhoneOnuOmciSpecificProfileMESrcProfile. How to update existing Specific profile from a file: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = import zhoneOnuOmciGenericProfileFileName.aaa = <filename> How to extract Specific profile into a file: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = export zhoneOnuOmciGenericProfileFilename.aaa = <filename> 3. The file <filename> now exists on uplink file system How to delete Specific profile: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = destroy

OBJECT-TYPE

Row in the OMCI Specific Profile table

OBJECT-TYPE

A unique index for each row entry. The index value corresponds to the ifIndex of the ONU which uses this profile.

OBJECT-TYPE

Row status for the Specific Profile entry. Not really used for the configuration of the ONUs

OBJECT-TYPE

Contains the Specific set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss.

OBJECT-TYPE

Name of ME profile used to create the Specific profile. The value for this object is only initialized when the profile is created.

OBJECT-TYPE

Name of file to be loaded into profile. This object is write-only and is not preserved.

OBJECT-TYPE

A table of all GPON OMCI ONU alarms.

OBJECT-TYPE

An entry for each ONU in the zhoneGponOmciOnuAlarmsTable.

OBJECT-TYPE

This is a long ascii string which contains the GPON OMCI ONU alarms. Each line of text in this string has the following format: aaa,bbb,ccc,'aaaStr,'bbbStr',d\n where aaa : ME classId ( numeric decimal value ) bbb : alarm index ( numeric decimal value ) ccc : entityId ( numeric decimal value ) aaaStr : string version of ME name bbbStr : string version of alarm name d : alarm severity ( 1=critical, 2=major, 3=minor, 4=warning ) The ME classId is the standard value from the 'Managed entity identifiers' table of G984.4. The alarm index is the zero-based index (G984.4 or G983.2) within the ME class. the entityId is the physical port number on the ONT. Here is a sample: 11,0,513,'PptpEthUni','LanLos',2\n 256,1,0,'OntG','PoweringAlarm',3\n If this string has zero length then there are no active alarms. If this string has a single entry with a classId of 65535 then the alarm collection failed. WARNING! In this description, replace the sinqle quote characters with double quote characters! The Zhone scripts have problems with double quote characters!

OBJECT-TYPE

A table of the GPON GEM Port Traffic profiles.

OBJECT-TYPE

Row in the zhoneGponPortTrafProfileTable.

OBJECT-TYPE

Used to index an entry in the GEM port traffic profile table

OBJECT-TYPE

The row status for the GEM Port Traffic profile.

OBJECT-TYPE

Bandwidth guaranteed by this alloc-id. This value is specified in kilobits per second. Only multiples of 512 are allowed, and the value may not exceed 2621440 (i.e. 2.5 gigabits per second).

OBJECT-TYPE

Whether traffic is Constant Bit Rate or Unspecified Bit Rate.

OBJECT-TYPE

For CBR, indicates whether compensated.

OBJECT-TYPE

TRUE if the GEM Port which uses this traffic descriptor shares and allocation ID with another GEM port. FALSE otherwise. When used more than once in the same ONU, the GEM ports are assigned the same alloc-id value.

OBJECT-TYPE

A flag to indicate if dynamic or static bandwidth allocation is used. The default value of DbaEnabled is false.

OBJECT-TYPE

Fixed UBR bandwidth will be always allocated UBR bandwidth. The min values of Fixed Ubr bandwidth can be 0 or 128kilo bits per second.Only multiples of 64 kilobits per second are allowed.

OBJECT-TYPE

Fixed CBR bandwidth will be always allocated CBR bandwidth. The min value of Fixed Cbr bandwidth can be 0 or 512 kilobits per second.Only multiples of 64 kilo bits per second are allowed.

OBJECT-TYPE

DBA Assured bandwidth will be allocated when traffic demand exists. The min value of Assured bandwidth can be 0 or 256 kilobits per second. Only multiples of 64 kilo bits per second are allowed.

OBJECT-TYPE

The Max Bandwidth value should be larger or equal to the sum of Fixed UBR, Fixed CBR and Assured.The increments should be done in the order of 64 kilobits per second.The default value of maximum bandwidth is 0.

OBJECT-TYPE

Extra Bandwidth = MaxBw - (Assured+FixedUbr+FixedCbr) The two Extra bandwidth types supported are : 1.nonassured 2.besteffort By default the value is nonassured.Nonassured has higher priority for getting unused bandwidth than besteffort.

OBJECT-TYPE

Current status of GEM port as reported from Gpon driver.

OBJECT-TYPE

Row in the zhoneGponPortStatusTable.

OBJECT-TYPE

The current dynamic alloc-id value for the GEM port.

OBJECT-TYPE

The current DBA status for this GEM port. DBA status reporting is on a per-ONU basis. All GEM ports on the ONU will report the same value. Possible values: sr - DBA type is SR and there is no error nsr - DBA type is NSR and there is no error nsrError - DBA type is NSR and there is an error or the ONU does not support NSR notEnabled - DBA has been disabled notAvailable - cannot communicate with ONU notAdded - ONU is not added to the OLT error - internal error prevents data collection

OBJECT-TYPE

Table of current-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.

OBJECT-TYPE

Row in zhoneGponOmciStatsCurrentTable. Each row retrieves counters for the current 15-minute interval for one managed entity on one logical port of one ONT.

OBJECT-TYPE

This is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.

OBJECT-TYPE

This specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.

OBJECT-TYPE

Blob of statistics information returned. Format is: PhysPort,I1,A1,I2,A2,...In,An where PhysPort - physical port ID value Ii = attribute index (0-15, ascii-coded decimal integer) within ME according to G984,4 standard. Ai = attribute value (counter, ascii-coded decimal integer) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.

OBJECT-TYPE

Table of previous-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.

OBJECT-TYPE

Row in zhoneGponOmciStatsPreviousTable. Each row retrieves counters for the last completed 15-minute interval for one managed entity on one logical port of one ONT.

OBJECT-TYPE

This is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.

OBJECT-TYPE

This specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.

OBJECT-TYPE

Blob of statistics information returned. Format is: PhysPort,I1,A1,I2,A2,...In,An where PhysPort - physical port ID value Ii = attribute index (0-15, ascii-coded decimal integer) within ME according to G984,4 standard. Ai = attribute value (counter, ascii-coded decimal integer) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.

OBJECT-TYPE

Table of current-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.

OBJECT-TYPE

Row in zhoneGponOmciStatsCurrentTable. Each row retrieves counters for the current 15-minute interval for one managed entity on one logical port of one ONT.

OBJECT-TYPE

This is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.

OBJECT-TYPE

This specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.

OBJECT-TYPE

Blob of status information returned. Format is: PhysPort,attrId1,attrName1,attrNumValue1,attrStrValue1... attrIdn,attrNamen,attrNumValuen,attrStrValuen where PhysPort - physical port ID value attrIdn = index number (0-15) of the attribute within the the ME (ascii decimal) attrNamen = name of the attribute (returned by OCS) attrNumValuen = value of the attribute (ascii decimal) attrStrValuen = interpreted value ( 'up', 'down', etc ) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.

OBJECT-TYPE

Table of objects used to reboot an ONU via the OMCI.

OBJECT-TYPE

A single entry in the table

OBJECT-TYPE

Set this object to 'reboot to reboot an ONU. The reboot command is sent to the ONU over the OMCI. Successful transmission of the reboot command to the ONU does no guarantee the ONU will reboot. The ONU may be in a fatal lockup which prevents the processing of the reboot command.

OBJECT-TYPE

Table of objects used to configure the admin state of a physical port on an ONU.

OBJECT-TYPE

A single entry in the table

OBJECT-TYPE

This is the ID of the managed entity in the ITU G984.4 standard.

OBJECT-TYPE

This specifies which entity on the ONT we want. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.

OBJECT-TYPE

This object is used to place an ONU physical port in a DOWN or UP state. This state is a configuration parameter and is preserved.

OBJECT-TYPE

This object is used to set the auto detection rate of an ONU physical port.This state is a configuration parameter and is preserved.

OBJECT-TYPE

This table is used to perform ONU software upgrades. There is one table entry for each ONU. Each ONU is addressed by it's ifIndex.

OBJECT-TYPE

An entry for one ONU.

OBJECT-TYPE

Which software upgrade action to perform.

OBJECT-TYPE

Name of file to be loaded downloaded to ONU. Required on download actions.

OBJECT-TYPE

Optional on all actions. Indicates which partition or 'none'in which case default is to use inactive partition for download or activate action, or to the uncommitted partion for commit action. On a read, returns the partition used for current or latest upgrade.

OBJECT-TYPE

Version information for s/w image loaded into partition 0.

OBJECT-TYPE

Version information for s/w image loaded into partition 1.

OBJECT-TYPE

Current commit status for partition 0.

OBJECT-TYPE

Current commit status for partition 1.

OBJECT-TYPE

Current activated status for partition 0.

OBJECT-TYPE

Current activated status for partition 1.

OBJECT-TYPE

Current valid status for partition 0.

OBJECT-TYPE

Current valid status for partition 0.

OBJECT-TYPE

Current s/w image download status.

OBJECT-TYPE

Model id read from this onu.

OBJECT-TYPE

Start time, as ascii string, of most recent upgrade.

OBJECT-TYPE

If true, the downloaded image will be activated when download completes.

OBJECT-TYPE

If true, this image will be committed on successful activation.

OBJECT-TYPE

Indicates the reason for the upgrade.

OBJECT-TYPE

Image download progress. This object is only valid during image download.

OBJECT-TYPE

The download method used for upgrading this ONU. TFTP is used where possible, else OMCI (default).

OBJECT-TYPE

Current Status of OLT as reported from the Gpon Driver.

OBJECT-TYPE

Row in the zhoneGponOltStatusTable.

OBJECT-TYPE

Internally measured Tranceiver Temperature of the OLT in Celcius.

OBJECT-TYPE

Internally measured Tranceiver Supply Voltage of the OLT in Volts. The measured value will be in the order of hundredths of Volts.

OBJECT-TYPE

Measured Tx Bias current per OLT in milli Amperes.

OBJECT-TYPE

Measured Tx Output Power of the OLT in dB. The measured value will be in tenths of dB.

OBJECT-TYPE

When the End Of Life(EOL) Alarm bit is set an alarm will be raised. Alarm is set at about 150% of original current.Alarm will be level Major. It will be cleared when the SFP is replaced, or when the Alarm bit is cleared. Warning indication will be provided when user asks for status. Warning is set when EOL is at about 130% original current.

OBJECT-TYPE

Bitmap of alarm conditions present, as reported from the SFP.

OBJECT-TYPE

The bit-coded OLT status word.

OBJECT-TYPE

Count of the ONUs on this OLT where onu-added = TRUE.

OBJECT-TYPE

Number of ONUs on this OLT currently in operational state UP.

OBJECT-TYPE

Current status of OLT DBA as reported from CAC.

OBJECT-TYPE

Row in the zhoneGponOltDbaStatusTable.

OBJECT-TYPE

The Total Available DBA Bandwidth per OLT.The unit is Kilobits( 1000 bits).

OBJECT-TYPE

The Total Available DBA Compensated CBR bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

The Total Available DBA Allocated UBR bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

The Total Available DBA Allocated CBR bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

The Total Available DBA Allocated CBR Compensated bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

The Total Available DBA Allocated Assured bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

The Total Available DBA Allocated Non Assured bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

The Total Available DBA Allocated Best Effort bandwidth per OLT. The unit is Kilobits(1000 bits).

OBJECT-TYPE

Maximum number of alloc-Ids supported by this OLT.

OBJECT-TYPE

Total number of available alloc-Ids for this OLT.

OBJECT-TYPE

Total number of alloc-Ids in use for this OLT.

OBJECT-TYPE

Maximum number of DBA alloc-Ids supported by this OLT.

OBJECT-TYPE

Total number of available DBA alloc-Ids for this OLT.

OBJECT-TYPE

Total number of DBA alloc-Ids in use for this OLT.

OBJECT-TYPE

Total number GEM Ports currently on this OLT.

OBJECT-TYPE

This object contains the result code of the last GPON CAC request for the OLT.

OBJECT-TYPE

Information about onu upgrade.

OBJECT-TYPE

Row in onu upgrade table.

OBJECT-TYPE

Olt number on the card.

OBJECT-TYPE

Onu number within olt.

OBJECT-TYPE

Model ID returned from this Onu.

OBJECT-TYPE

Last upgrade start time, as ascii string

OBJECT-TYPE

Onu ifIndex

OBJECT-TYPE

The actual upgrade state of the onu.

OBJECT-TYPE

If true, the image will be activated if download is successful.

OBJECT-TYPE

If true, image will be committed after successful activation.

OBJECT-TYPE

Indicates the reason for the upgrade.

OBJECT-TYPE

If upgrade has been requested, this is the image partition of the latest upgrade.

OBJECT-TYPE

Image download progress. This object is only valid during image download.

OBJECT-TYPE

The download method used for upgrading this ONU. TFTP is used where possible, else OMCI (default).

OBJECT-IDENTITY

OBJECT-TYPE

GPON Command operation. This object must be supplied with each operation.

OBJECT-TYPE

GPON Command operation filter. This object must be supplied with each operation.

OBJECT-TYPE

GPON command 'SHELF' filter value. This parameter is for future use and is currently not supported.

OBJECT-TYPE

GPON command 'SLOT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).

OBJECT-TYPE

GPON command 'OLT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).

OBJECT-TYPE

GPON command 'ONU' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).

OBJECT-TYPE

Per OLT statistics gathered from Broadlight device.

OBJECT-TYPE

Per OLT statistics gathered from Broadlight device.

OBJECT-TYPE

UpstreamValidGemFrames counter.

OBJECT-TYPE

UpstreamDiscardedFrames counter.

OBJECT-TYPE

UpstreamGemFrames counter.

OBJECT-TYPE

UpstreamOmciFrames counter.

OBJECT-TYPE

UpstreamPloamFrames counter.

OBJECT-TYPE

UpstreamIdlePloamFrames counter.

OBJECT-TYPE

DownstreamValidGemFrames counter.

OBJECT-TYPE

DownstreamDiscardedFrames counter.

OBJECT-TYPE

DownstreamGemFrames counter.

OBJECT-TYPE

DownstreamOmciFrames counter.

OBJECT-TYPE

DownstreamPloamFrames counter.

OBJECT-TYPE

DownstreamIdlePloamFrames counter.

OBJECT-TYPE

DownstreamPonValidEthernetPkts counter.

OBJECT-TYPE

DownstreamPonCpuPkts counter.

OBJECT-TYPE

DownstreamTxBytes counter.

OBJECT-TYPE

Description.

OBJECT-TYPE

UpstreamPonValidNotIdlePloams counter.

OBJECT-TYPE

UpstreamPonErrorPloams counter.

OBJECT-TYPE

UpstreamPonInvalidPkts counter.

OBJECT-TYPE

UpstreamDroppedPktsInactivePorts counter.

OBJECT-TYPE

UpstreamDroppedPloamsFifoFull counter.

OBJECT-TYPE

DownstreamTmValidPkts counter.

OBJECT-TYPE

DownstreamTmCrcPkts counter.

OBJECT-TYPE

DownstreamTmDroppedCpuPkts counter.

OBJECT-TYPE

DownstreamTmMacLookupMiss counter.

OBJECT-TYPE

DownstreamTmPktsForwardedFromHmToPon counter.

OBJECT-TYPE

DownstreamTmPktsDroppedGemPidNotEnabled counter.

OBJECT-TYPE

DownstreamTmQ0ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ0DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ1ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ1DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ2ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ2DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ3ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ3DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ4ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ4DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ5ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ5DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ6ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ6DroppedPkts counter.

OBJECT-TYPE

DownstreamTmQ7ValidPkts counter.

OBJECT-TYPE

DownstreamTmQ7DroppedPkts counter.

OBJECT-TYPE

UpstreamTmDroppedCpuPkts counter.

OBJECT-TYPE

UpstreamTmDroppedPktsCrcError counter.

OBJECT-TYPE

UpstreamTmDroppedPktsSecurity counter.

OBJECT-TYPE

UpstreamTmLearnFailures counter.

OBJECT-TYPE

UpstreamTmQ0ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ0DroppedPkts counter.

OBJECT-TYPE

UpstreamTmQ1ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ1DroppedPkts counter.

OBJECT-TYPE

UpstreamTmQ2ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ2DroppedPkts

OBJECT-TYPE

UpstreamTmQ3ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ3DroppedPkts counter.

OBJECT-TYPE

UpstreamTmQ4ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ4DroppedPkts counter.

OBJECT-TYPE

UpstreamTmQ5ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ5DroppedPkts counter.

OBJECT-TYPE

UpstreamTmQ6ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ6DroppedPkts counter.

OBJECT-TYPE

UpstreamTmQ7ValidPkts counter.

OBJECT-TYPE

UpstreamTmQ7DroppedPkts counter.

OBJECT-TYPE

Clear all statistics for the selected interface.

OBJECT-TYPE

Per ONT Upstream Statistics provided by Broadlight.

OBJECT-TYPE

Per ONT Upstream Statistics provided by Broadlight.

OBJECT-TYPE

UpstreamOntStatisticsUpstreamBipErrors counter.

OBJECT-TYPE

UpstreamOntStatisticsFecCorrectedBytes counter.

OBJECT-TYPE

UpstreamOntStatisticsFecCorrectedCodewords counter.

OBJECT-TYPE

UpstreamOntStatisticsFecUncorrectedCodewords counter.

OBJECT-TYPE

UpstreamOntStatisticsTotalRxCodewords counter.

OBJECT-TYPE

UpstreamOntStatisticsUnreceivedBursts counter.

OBJECT-TYPE

UpstreamOntStatisticsBipErrors counter.

OBJECT-TYPE

UpstreamOntStatisticsRemoteBipErrors counter.

OBJECT-TYPE

UpstreamOntStatisticsDriftOfWindowIndications counter.

OBJECT-TYPE

UpstreamOntStatisticsMessageErrorMessage counter.

OBJECT-TYPE

Clear all statistics for the selected interface.