MIBs Depot

Zhone-CPE-MIB

Registered at
1.3.6.1.4.1.5504.5.16.1
1.3.6.1.4.1.5504.6.118
Last updated
2014-04-22 13:40
Organization
Zhone Technologies, Inc.
Revisions
2014-05-05 11:09, 2014-04-18 18:44, 2014-04-22 15:49, 2014-03-21 11:35, 2014-03-13 16:36, 2014-03-10 11:27, 2014-03-07 13:15, 2014-03-05 11:38, 2014-02-24 13:07, 2014-02-03 12:52, 2014-01-24 15:31, 2013-12-16 08:17, 2013-12-04 13:35, 2013-11-18 16:19, 2013-09-24 14:35, 2013-08-19 14:47, 2013-08-07 10:54, 2013-07-25 13:40, 2013-07-18 08:54, 2013-06-27 23:26, 2013-06-24 11:43, 2013-06-23 23:58, 2013-06-06 18:55, 2013-06-06 11:26, 2013-06-06 10:03, 2013-06-04 23:14, 2013-05-15 09:35, 2013-04-22 12:46, 2013-04-11 14:16, 2013-03-18 11:51, 2013-03-01 14:17, 2013-01-11 23:10, 2012-12-18 10:18, 2013-01-02 18:30, 2012-11-19 12:29, 2012-10-31 06:49, 2012-09-24 10:48, 2012-08-05 23:50, 2012-07-12 14:37, 2012-07-03 09:57, 2012-06-21 12:02, 2012-06-20 09:52, 2012-06-12 11:57, 2012-05-20 23:49, 2012-05-09 16:26, 2012-04-30 09:52, 2012-04-25 10:24, 2012-04-20 22:45, 2012-04-12 16:15, 2012-03-28 10:52, 2012-03-26 09:58, 2012-03-19 10:43, 2012-02-13 15:49, 2012-01-28 10:47, 2011-11-11 15:05, 2011-09-23 14:04, 2011-09-08 14:16, 2011-07-12 15:17, 2011-07-05 14:15, 2011-06-16 11:18, 2011-06-03 01:04, 2011-05-23 09:25, 2011-05-18 00:15, 2011-04-27 10:14, 2011-04-12 15:36, 2011-03-28 10:07, 2011-03-01 10:29, 2011-02-18 14:51, 2011-02-03 10:48, 2011-01-19 14:20, 2011-01-20 12:01, 2011-01-12 14:01, 2010-12-17 10:02, 2010-12-09 12:51
Namespace
zhone
Source file
Zhone-CPE-MIB
Digest
sha256:c9b857d19fc895e92012da019c9dface79f0139b78a98326a78f1de4ce6930bb

Description

This is the Zhone CPE mib which contains SNMP objects for the CPE voice and pseudowire.

Contact

Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com

Imports

FromSymbols
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIInteger32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue
ZhoneapsMIB, efmCuMIB, efmOamMIB, pktcIetfSigMib, sechtor100, sechtor300, sipCommonMIB, sipTC, sipUAMIB, zhoneApon, zhoneAtm, zhoneBonding, zhoneBridge, zhoneCard, zhoneCes, zhoneClass5, zhoneConsole, zhoneCpe, zhoneDrafts, zhoneDs3Ext, zhoneDsl, zhoneDsx, zhoneEnet, zhoneGenWtn, zhoneGpon, zhoneGroups, zhoneIma, zhoneInterfaceGroup, zhoneInterfaceTranslation, zhoneIp, zhoneIsdn, zhoneLineTypes, zhoneMalc, zhoneMasterAgent, zhoneModules, zhoneOcx, zhonePls, zhonePpp, zhoneRadio, zhoneRegCpe, zhoneRegMalc, zhoneRegMux, zhoneRegPls, zhoneRegSechtor, zhoneRegWtn, zhoneShelf, zhoneShelfIndex, zhoneShelfSlotCompliance, zhoneShelfSlotGroup, zhoneSlotIndex, zhoneSonet, zhoneSs7, zhoneSubscriber, zhoneSystem, zhoneTrapModules, zhoneVdsl, zhoneVideo, zhoneVoice, zhoneVoiceStats, zhoneVoip, zhoneWdm, zhoneWtn, zhoneZAP, zhoneZedge, zhoneZmsProduct, zhoneZplex
Zhone-TCZhoneAdminState, ZhoneAdminString, ZhoneAlarmSeverity, ZhoneEnabledFlag, ZhoneRowStatus

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
Zhone
Zhone-CPE-MIB
Zhone-TC

Textual conventions

NameOIDSyntaxAccessStatus
TpType
TEXTUAL-CONVENTION
Valid termination points on CPE devices.
current
ZhoneCpeTemplateType
TEXTUAL-CONVENTION
Specifies TemplateType as voip/pwe/wifi/data/video.
current

Objects

NameOIDSyntaxAccessStatus
zhoneCpeObjectID
OBJECT-IDENTITY
1.3.6.1.4.1.5504.5.16.1
zhoneCpeSipDialPlan
OBJECT-IDENTITY
Cpe Sip Dial plan for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.1current
zhoneCpeSipDialPlanIndexTable
OBJECT-TYPE
Table of next available index values for each CPE SIP Dialplan group.
1.3.6.1.4.1.5504.5.16.1.1.1not-accessiblecurrent
zhoneCpeSipDialPlanIndexEntry
OBJECT-TYPE
Row in the zhoneCpeSipDialPlanIndexTable
1.3.6.1.4.1.5504.5.16.1.1.1.1not-accessiblecurrent
zhoneCpeSipDialPlanIndexNext
OBJECT-TYPE
This represents the next available index value for SIP dial plan profile.
1.3.6.1.4.1.5504.5.16.1.1.1.1.1Unsigned32 (1..2147483647)read-onlycurrent
zhoneCpeSipDialPlanTable
OBJECT-TYPE
Cpe Sip Dial plan table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.1.2not-accessiblecurrent
zhoneCpeSipDialPlanEntry
OBJECT-TYPE
Row in the CpeSipDialPlan table.
1.3.6.1.4.1.5504.5.16.1.1.2.1not-accessiblecurrent
zhoneCpeSipServerIndex
OBJECT-TYPE
This represents the SIP dial plan server index value.
1.3.6.1.4.1.5504.5.16.1.1.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeSipDialPlanIndex
OBJECT-TYPE
This represents the SIP dial plan index value.
1.3.6.1.4.1.5504.5.16.1.1.2.1.2Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeSipDialPlanRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.1.2.1.3ZhoneRowStatusread-createcurrent
zhoneCpeSipDialPlanFormat
OBJECT-TYPE
DialPlanFormat defines the dial plan format standard that is supported in the ONT for VoIP.
1.3.6.1.4.1.5504.5.16.1.1.2.1.4INTEGER {h248(1), nsc(2), vendorspecific(3)}read-createcurrent
zhoneCpeSipDialPlanString
OBJECT-TYPE
SipDialPlan contains a dial plan used by the VoIP service.
1.3.6.1.4.1.5504.5.16.1.1.2.1.5OCTET STRING (SIZE(1..64))read-createcurrent
zhoneCpeVoipServer
OBJECT-IDENTITY
Cpe Voip Server for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.2current
zhoneCpeVoipServerIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeVoipServerIndex when creating entries in the zhoneCpeVoipServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.2.1Integer32read-onlycurrent
zhoneCpeVoipServerTable
OBJECT-TYPE
Cpe Voip Server table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.2.2not-accessiblecurrent
zhoneCpeVoipServerEntry
OBJECT-TYPE
Row in the VoipServer table.
1.3.6.1.4.1.5504.5.16.1.2.2.1not-accessiblecurrent
zhoneCpeVoipServerIndex
OBJECT-TYPE
This represents the CPE Voip Server Index value.
1.3.6.1.4.1.5504.5.16.1.2.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeVoipServerRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.2.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeVoipProfileName
OBJECT-TYPE
CPE Voip Server profile for the VoIP services for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.2.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeVoipPrimaryServer
OBJECT-TYPE
This attribute contains the name (IP address or resolved name) of the primary MGC or SIP proxy server that controls the signaling messages.
1.3.6.1.4.1.5504.5.16.1.2.2.1.4InetAddressread-createcurrent
zhoneCpeVoipSecondaryServer
OBJECT-TYPE
This attribute contains the name (IP address or resolved name) of the secondary or backup MGC that controls the signalling messages.
1.3.6.1.4.1.5504.5.16.1.2.2.1.5InetAddressread-createcurrent
zhoneCpeVoipServerSignallingProtocol
OBJECT-TYPE
This attribute specifies the VoIP signalling protocol to use.
1.3.6.1.4.1.5504.5.16.1.2.2.1.6INTEGER {sip(1), sipplar(2), h248(3), mgcp(4)}read-createcurrent
zhoneCpeVoipSipRegExpirationTime
OBJECT-TYPE
Sip Reg Expiration Time specifies the SIP registration expiration time in seconds. If its value is 0, the SIP agent does not add an expiration time to the registration requests and does not perform re-registration. The default value is 3600 seconds.
1.3.6.1.4.1.5504.5.16.1.2.2.1.7Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeVoipSipReRegHeadStartTime
OBJECT-TYPE
Sip ReReg Head Star Time specifies the time in seconds prior to timeout that causes the SIP agent to start the re-registration process. The default value is 360 seconds.
1.3.6.1.4.1.5504.5.16.1.2.2.1.8Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeVoipSipDomain
OBJECT-TYPE
This attribute contains the host or domain part of the SIP address of record for users connected to this ONT.
1.3.6.1.4.1.5504.5.16.1.2.2.1.9InetAddressread-createcurrent
zhoneCpeVoipSipRegistrar
OBJECT-TYPE
Sip Registrar points to a network address ME that contains the name (IP 25 address or resolved name) of the registrar server for SIP signalling messages.
1.3.6.1.4.1.5504.5.16.1.2.2.1.10InetAddressread-createcurrent
zhoneCpeVoipSoftSwitch
OBJECT-TYPE
Soft switch identifies the SIP gateway softswitch vendor. The format is four ASCII coded alphabetic characters [A..Z] as defined in ANSI T1.220. A 30 value of four null characters indicates no particular vendor.
1.3.6.1.4.1.5504.5.16.1.2.2.1.11ZhoneAdminStringread-createcurrent
zhoneCpeVoipMgcVersion
OBJECT-TYPE
This integer attribute reports the version of the Megaco protocol in use.
1.3.6.1.4.1.5504.5.16.1.2.2.1.12Integer32 (0..255)read-createcurrent
zhoneCpeVoipMgcMessageFormat
OBJECT-TYPE
This attribute defines the message format.
1.3.6.1.4.1.5504.5.16.1.2.2.1.13INTEGER {long(1), short(2), binary(3)}read-createcurrent
zhoneCpeVoipMgcMaximumRetryTime
OBJECT-TYPE
This attribute specifies the maximum retry time for MGC transactions, in seconds. The default value 0 specifies vendor-specific implementation.
1.3.6.1.4.1.5504.5.16.1.2.2.1.14Integer32 (0..65535)read-createcurrent
zhoneCpeVoipMgcMaximumRetryAttempts
OBJECT-TYPE
This attribute specifies the maximum number of times a message is retransmitted to the MGC. The default value 0 specifies vendor specific implementation.
1.3.6.1.4.1.5504.5.16.1.2.2.1.15Integer32 (0..65535)read-createcurrent
zhoneCpeVoipMgcServiceChangeDelay
OBJECT-TYPE
The attribute specifies the service status delay time for changes in line service status. This attribute is specified in seconds. The default value 0 specifies no delay.
1.3.6.1.4.1.5504.5.16.1.2.2.1.16Integer32 (0..65535)read-createcurrent
zhoneCpeVoipMgcTerminationIdBase
OBJECT-TYPE
The attribute specifies the base string for the H.248 physical termination id(s) for this ONT. This string is intended to uniquely identify an ONT. Vendor specific termination identifiers (i.e. port ids) are optionally added to this string to uniquely identify a termination on a specific ONT.
1.3.6.1.4.1.5504.5.16.1.2.2.1.17OCTET STRING (SIZE(0..25))read-createcurrent
zhoneCpeVoipReleaseTimer
OBJECT-TYPE
This attribute contains a release timer defined in seconds. The value 0 specifies that the ONT is to use its internal default. The default value of this 45 attribute is 10 seconds.
1.3.6.1.4.1.5504.5.16.1.2.2.1.18Integer32 (0..255)read-createcurrent
zhoneCpeVoipRohTimer
OBJECT-TYPE
This attribute defines the time in seconds for the receiver off hook condition before ROH tone is applied. The value 0 disables ROH timing. The default value is 15 seconds.
1.3.6.1.4.1.5504.5.16.1.2.2.1.19Integer32 (0..255)read-createcurrent
zhoneCpeVoipDscpMark
OBJECT-TYPE
Diffserv code point to be used for outgoing RTP packets for this profile. The default value is expedited forwarding (EF) = 0x2E.
1.3.6.1.4.1.5504.5.16.1.2.2.1.20Integer32 (0..255)read-createcurrent
zhoneCpeVoipPiggyBackEvents
OBJECT-TYPE
Enables or disables RTP piggyback events.
1.3.6.1.4.1.5504.5.16.1.2.2.1.21ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipOobToneEvents
OBJECT-TYPE
Enables or disables handling of tones via RTP tone events per RFC 4733.
1.3.6.1.4.1.5504.5.16.1.2.2.1.22ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipOobDtmfEvents
OBJECT-TYPE
Enables or disables handling of DTMF via RTP DTMF events per RFC 4733.
1.3.6.1.4.1.5504.5.16.1.2.2.1.23ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipOobCasEvents
OBJECT-TYPE
Enables or disables handling of CAS via RTP CAS events per RFC 4733.
1.3.6.1.4.1.5504.5.16.1.2.2.1.24ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipPartialDialTimeout
OBJECT-TYPE
This attribute defines the partial dial timeout for digit map processing in milliseconds. The default value is 16000 ms.
1.3.6.1.4.1.5504.5.16.1.2.2.1.25Integer32 (0..65535)read-createcurrent
zhoneCpeVoipCriticalDialTimeout
OBJECT-TYPE
This attribute defines the critical dial timeout for digit map processing in milliseconds. The default value is 4000 ms.
1.3.6.1.4.1.5504.5.16.1.2.2.1.26Integer32 (0..65535)read-createcurrent
zhoneCpeVoipServerOutboundServer
OBJECT-TYPE
This attribute contains the name (IP address or resolved name) of the outbound proxy server for SIP signalling messages.
1.3.6.1.4.1.5504.5.16.1.2.2.1.27InetAddressread-createcurrent
zhoneCpeVoipServerPortId
OBJECT-TYPE
This attribute specifies the TCP/UDP port number of the VoIP protocol. The default value -1 select the default port number for the VoIP protocol. It is 2944 for H.248 and 5060 for SIP.
1.3.6.1.4.1.5504.5.16.1.2.2.1.28Integer32 (-1..32767)read-createcurrent
zhoneCpeVoipDtmfEventsPassingMethod
OBJECT-TYPE
If zhoneCpeVoipOobDtmfEvents is disabled, dtmp digits are carried along the voice path. If zhoneCpeVoipOobDtmfEvents = enabled, we look at the dtmf-events-passing-method. If zhoneCpeVoipDtmfEventsPassingMethod = rfc4733, dtmf digits are carried in the RTP payload. If zhoneCpeVoipDtmfEventsPassingMethod = sip-info, dtmf digits are carried along the signalling path in the INFO messages.
1.3.6.1.4.1.5504.5.16.1.2.2.1.29INTEGER {rfc4733(1), sipinfo(2)}read-createcurrent
zhoneCpeVoipCasEventsPassingMethod
OBJECT-TYPE
If zhoneCpeVoipOobCasEvents is disabled, dtmp digits are carried along the voice path. If zhoneCpeVoipOobCasEvents = enabled, we look at the dtmf-events-passing-method. If zhoneCpeVoipCasEventsPassingMethod = rfc4733, dtmf digits are carried in the RTP payload. If zhoneCpeVoipCasEventsPassingMethod = sip-info, dtmf digits are carried along the signalling path in the INFO messages.
1.3.6.1.4.1.5504.5.16.1.2.2.1.30INTEGER {rfc4733(1), sipinfo(2)}read-createcurrent
zhoneCpeVoipRtpDscp
OBJECT-TYPE
This parameter indicates DSCP value for cpe voip rtp traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
1.3.6.1.4.1.5504.5.16.1.2.2.1.31OCTET STRING (SIZE(1..8))read-createcurrent
zhoneCpeVoipSignalingDscp
OBJECT-TYPE
This parameter indicates DSCP value for cpe voip signaling traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
1.3.6.1.4.1.5504.5.16.1.2.2.1.32OCTET STRING (SIZE(1..8))read-createcurrent
zhoneCpeVoipSipRegRetryTime
OBJECT-TYPE
Sip Reg Retry Time specifies the SIP registration retry time in seconds. The default value is 60 seconds.
1.3.6.1.4.1.5504.5.16.1.2.2.1.33Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeVoipMgcpClientAddressMode
OBJECT-TYPE
Ip and IpBracketed will cause the MGCP Client name to be the bound voice host IP address. Domain Name will allow the user to input any text string, usally a Domain Name.
1.3.6.1.4.1.5504.5.16.1.2.2.1.34INTEGER {ip(1), ipBracketed(2), domainName(3)}read-createcurrent
zhoneCpeVoipMgcpPersistentNotify
OBJECT-TYPE
When enabled, all switchhook events will be forwarded to the switch immediately without regards to what the switch has requested. When disabled, the event that the switch has requested will be forwarded.
1.3.6.1.4.1.5504.5.16.1.2.2.1.35ZhoneEnabledFlagread-createcurrent
zhoneCpeIpTable
OBJECT-TYPE
Cpe Ip table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.3not-accessiblecurrent
zhoneCpeIpEntry
OBJECT-TYPE
Row in the CpeIp table.
1.3.6.1.4.1.5504.5.16.1.3.1not-accessiblecurrent
zhoneCpeIfIndex
OBJECT-TYPE
This represents the CPE Ip index value.
1.3.6.1.4.1.5504.5.16.1.3.1.1InterfaceIndexnot-accessiblecurrent
zhoneCpeIpServiceType
OBJECT-TYPE
This represents the CPE Ip service types.
1.3.6.1.4.1.5504.5.16.1.3.1.2INTEGER {voip(1), pwe(2), wifi(3)}not-accessiblecurrent
zhoneCpeIpRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.3.1.3ZhoneRowStatusread-createcurrent
zhoneCpeHostIp
OBJECT-TYPE
The address used for IP host services, this attribute has default value 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.3.1.4IpAddressread-createcurrent
zhoneCpeIpServerProfileIndex
OBJECT-TYPE
This attribute points to the cpe-ip-server profile associated with this host IP. When cpe-ip profile is missing, use the default cpe-ip-server profile with DHCP enabled.
1.3.6.1.4.1.5504.5.16.1.3.1.5Integer32 (1..2147483647)read-createcurrent
zhoneCpeIpServer
OBJECT-IDENTITY
Cpe Ip Server for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.4current
zhoneCpeIpServerIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeIpServerIndex when creating entries in the zhoneCpeIpServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeIpServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.4.2Integer32read-onlycurrent
zhoneCpeIpServerTable
OBJECT-TYPE
Cpe Ip Server table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.4.3not-accessiblecurrent
zhoneCpeIpServerEntry
OBJECT-TYPE
Row in the CpeIpServer table.
1.3.6.1.4.1.5504.5.16.1.4.3.1not-accessiblecurrent
zhoneCpeIpServerIndex
OBJECT-TYPE
This represents the CPE Ip server index value.
1.3.6.1.4.1.5504.5.16.1.4.3.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeIpServerRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.4.3.1.2ZhoneRowStatusread-createcurrent
zhoneCpeIpServerProfileName
OBJECT-TYPE
CPE Ip server profile for the VoIP services for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.4.3.1.3ZhoneAdminStringread-createcurrent
zhoneCpeIpServerHostIpOption
OBJECT-TYPE
This attribute selects an IP related option.
1.3.6.1.4.1.5504.5.16.1.4.3.1.4INTEGER {dhcp(1), static(2)}read-createcurrent
zhoneCpeIpServerNetmask
OBJECT-TYPE
The subnet mask for IP host services.
1.3.6.1.4.1.5504.5.16.1.4.3.1.5IpAddressread-createcurrent
zhoneCpeIpServerGateway
OBJECT-TYPE
The default gateway address used for IP host services, this attribute has the default value 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.4.3.1.6IpAddressread-createcurrent
zhoneCpeIpServerPrimaryDns
OBJECT-TYPE
This attribute specifies the primary DNS IP address. If this value is 0.0.0.0, no primary SIP DNS is defined. The default value is 0.0.0.0
1.3.6.1.4.1.5504.5.16.1.4.3.1.7IpAddressread-createcurrent
zhoneCpeIpServerSecondaryDns
OBJECT-TYPE
This attribute specifies the secondary DNS IP address. If this value is 0.0.0.0, no secondary SIP DNS is defined. The default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.4.3.1.8IpAddressread-createcurrent
zhoneCpeIpServerFirewallAccess
OBJECT-TYPE
Lists the protocols allowed on this interface. The firewall option must be enabled before these settings will take effect.
1.3.6.1.4.1.5504.5.16.1.4.3.1.9Bits {http(0), ping(1), snmp(2), snmptrap(3), ssh(4), telnet(5)}read-createcurrent
zhoneCpeIpServerNat
OBJECT-TYPE
When it is enabled, NAT/NAPT function is performed to translate between the public IP address and the private addresses. It is only supported on a WAN interface.
1.3.6.1.4.1.5504.5.16.1.4.3.1.10INTEGER {nat(1), napt(2), disabled(3)}read-createcurrent
zhoneCpeIpServerSecureForward
OBJECT-TYPE
When this mode is enabled, packets are not flooded to all ports. Instead, all packets are forwarded to the port that is designated as the uplink port. In this mode, users are prevented from directly communicating with each other, and broadcast frames are discarded.
1.3.6.1.4.1.5504.5.16.1.4.3.1.11ZhoneEnabledFlagread-createcurrent
zhoneCpeIpServerIgmpFunction
OBJECT-TYPE
Enable an Igmp snooping function.
1.3.6.1.4.1.5504.5.16.1.4.3.1.12INTEGER {none(1), snooping(2), proxy(3), snoopingproxy(4)}read-createcurrent
zhoneCpeIpServerDefaultIface
OBJECT-TYPE
When true, an internally generated packet (e.g., from SNMP trap, SNTP, etc.) is sent out through this interface if the destination IP address is not defined in the route table.
1.3.6.1.4.1.5504.5.16.1.4.3.1.13TruthValueread-writecurrent
zhoneCpeIpServerDnsSrc
OBJECT-TYPE
When true, the Interface is used by the DHCP Client to obtain DNS information.
1.3.6.1.4.1.5504.5.16.1.4.3.1.14TruthValueread-writecurrent
zhoneCpeIpServerDnsType
OBJECT-TYPE
Default - Get the DNS information from the WAN interface Static - The DNS information is manually provisioned Proxy - Enable interface to act as a proxy for DNS requests
1.3.6.1.4.1.5504.5.16.1.4.3.1.15INTEGER {default(1), static(2), proxy(3)}read-writecurrent
zhoneCpeVoipFeatures
OBJECT-IDENTITY
Cpe Voip Features for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.5current
zhoneCpeVoipFeaturesIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeVoipFeaturesIndex when creating entries in the zhoneCpeVoipFeaturesTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipFeaturesIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.5.1Integer32read-onlycurrent
zhoneCpeVoipFeaturesTable
OBJECT-TYPE
Cpe Voip Features table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.5.2not-accessiblecurrent
zhoneCpeVoipFeaturesEntry
OBJECT-TYPE
Row in the CpeVoipFeatures table.
1.3.6.1.4.1.5504.5.16.1.5.2.1not-accessiblecurrent
zhoneCpeVoipFeaturesIndex
OBJECT-TYPE
This represents the CPE Voip Features index value.
1.3.6.1.4.1.5504.5.16.1.5.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeVoipFeaturesRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.5.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeVoipFeaturesProfileName
OBJECT-TYPE
CPE Voip Media profile for the dynamic bridging VoIP services. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.5.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeVoipFeaturesAnnouncementType
OBJECT-TYPE
This attribute specifies the treatment when a subscriber goes off hook but does not attempt a call.
1.3.6.1.4.1.5504.5.16.1.5.2.1.4INTEGER {silence(1), reordertone(2), fastbusy(3), voice(4), notapplicable(5)}read-createcurrent
zhoneCpeVoipCidFeatures
OBJECT-TYPE
This attribute contains a bit map of caller ID features. By default all the bits are set.
1.3.6.1.4.1.5504.5.16.1.5.2.1.5Bits {callingnumber(0), callingname(1), cidblocking(2), cidnumber(3), cidname(4), anonymouscidblocking(5)}read-createcurrent
zhoneCpeVoipCallWaitingFeatures
OBJECT-TYPE
This attribute contains a bit map of call waiting features. By default all the bits are set.
1.3.6.1.4.1.5504.5.16.1.5.2.1.6Bits {callwaiting(0), cidannouncement(1)}read-createcurrent
zhoneCpeVoipCallProgressOrTransferFeatures
OBJECT-TYPE
This attribute is a bit map of call processing features. By default all the bits are set.
1.3.6.1.4.1.5504.5.16.1.5.2.1.7Bits {threeway(0), calltransfer(1), callhold(2), callpark(3), donotdisturb(4), flashonemergency(5), emergencyhold(6), sixway(7)}read-createcurrent
zhoneCpeVoipCallPresentationFeatures
OBJECT-TYPE
This attribute is a bit map of call presentation features. By default all the bits are set.
1.3.6.1.4.1.5504.5.16.1.5.2.1.8Bits {msgwaitsplashring(0), msgwaitspecialdialtone(1), msgwaitvisual(2), callfwd(3)}read-createcurrent
zhoneCpeVoipFeaturesHotLine
OBJECT-TYPE
When the hotline is hot, the phone will immediately dial the Hotline number. When the hotline is warm, the phone wait for the period specified in warmline-timer in ms before automatically dial the hotline number.
1.3.6.1.4.1.5504.5.16.1.5.2.1.9INTEGER {disabled(1), hot(2), warm(3)}read-createcurrent
zhoneCpeVoipFeaturesHotLineNumber
OBJECT-TYPE
The number this phone will automatically dial, if hotline or warmline feature is enabled.
1.3.6.1.4.1.5504.5.16.1.5.2.1.10OCTET STRING (SIZE(0..127))read-createcurrent
zhoneCpeVoipFeaturesWarmLineTimer
OBJECT-TYPE
The wait period before a warmline automcatically dial the hotline number.
1.3.6.1.4.1.5504.5.16.1.5.2.1.11Unsigned32 (200..30000)read-createcurrent
zhoneCpeVoipMedia
OBJECT-IDENTITY
Cpe Voip Media for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.6current
zhoneCpeVoipMediaIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeVoipMediaIndex when creating entries in the zhoneCpeVoipMediaTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVoipMediaIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.6.1Integer32read-onlycurrent
zhoneCpeVoipMediaTable
OBJECT-TYPE
Cpe Voip Media table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.6.2not-accessiblecurrent
zhoneCpeVoipMediaEntry
OBJECT-TYPE
Row in the CpeVoipMedia table.
1.3.6.1.4.1.5504.5.16.1.6.2.1not-accessiblecurrent
zhoneCpeVoipMediaIndex
OBJECT-TYPE
This represents the CPE Voip Media index value.
1.3.6.1.4.1.5504.5.16.1.6.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeVoipMediaRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.6.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeVoipMediaProfileName
OBJECT-TYPE
CPE Voip Media profile for the dynamic bridging VoIP services. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.6.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeVoipMediaEchoCancel
OBJECT-TYPE
This attribute turns on and off echo cancellation.
1.3.6.1.4.1.5504.5.16.1.6.2.1.4ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipFaxMode
OBJECT-TYPE
This attribute selects the fax mode.
1.3.6.1.4.1.5504.5.16.1.6.2.1.5INTEGER {passthrough(1), t38(2)}read-createcurrent
zhoneCpeVoipCodecSelectionFirstOrder
OBJECT-TYPE
This attribute specifies codec selection as defined by RFC 3551.
1.3.6.1.4.1.5504.5.16.1.6.2.1.6INTEGER {pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)}read-createcurrent
zhoneCpeVoipPacketPeriodSelectionFirstOrder
OBJECT-TYPE
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
1.3.6.1.4.1.5504.5.16.1.6.2.1.7Integer32 (10..30)read-createcurrent
zhoneCpeVoipSilenceSuppressionFirstOrder
OBJECT-TYPE
This attribute specifies whether silence suppression is on or off.
1.3.6.1.4.1.5504.5.16.1.6.2.1.8ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipCodecSelectionSecondOrder
OBJECT-TYPE
This attribute specifies codec selection as defined by RFC 3551.
1.3.6.1.4.1.5504.5.16.1.6.2.1.9INTEGER {pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)}read-createcurrent
zhoneCpeVoipPacketPeriodSelectionSecondOrder
OBJECT-TYPE
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
1.3.6.1.4.1.5504.5.16.1.6.2.1.10Integer32 (10..30)read-createcurrent
zhoneCpeVoipSilenceSuppressionSecondOrder
OBJECT-TYPE
This attribute specifies whether silence suppression is on or off.
1.3.6.1.4.1.5504.5.16.1.6.2.1.11ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipCodecSelectionThirdOrder
OBJECT-TYPE
This attribute specifies codec selection as defined by RFC 3551.
1.3.6.1.4.1.5504.5.16.1.6.2.1.12INTEGER {pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)}read-createcurrent
zhoneCpeVoipPacketPeriodSelectionThirdOrder
OBJECT-TYPE
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
1.3.6.1.4.1.5504.5.16.1.6.2.1.13Integer32 (10..30)read-createcurrent
zhoneCpeVoipSilenceSuppressionThirdOrder
OBJECT-TYPE
This attribute specifies whether silence suppression is on or off.
1.3.6.1.4.1.5504.5.16.1.6.2.1.14ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipCodecSelectionFourthOrder
OBJECT-TYPE
This attribute specifies codec selection as defined by RFC 3551.
1.3.6.1.4.1.5504.5.16.1.6.2.1.15INTEGER {pcmu(1), gsm(2), g723(3), dvi4eightKHz(4), dvi4sixteenKHz(5), lpc(6), pcma(7), g722(8), l16twochannels(9), l16onechannel(10), qcelp(11), cn(12), mpa(13), g728(14), dvi411(15), dvi422(16), g729(17)}read-createcurrent
zhoneCpeVoipPacketPeriodSelectionFourthOrder
OBJECT-TYPE
This attribute specifies the packet period selection interval in milliseconds. The default value is 10. Valid values are 10..30 ms.
1.3.6.1.4.1.5504.5.16.1.6.2.1.16Integer32 (10..30)read-createcurrent
zhoneCpeVoipSilenceSuppressionFourthOrder
OBJECT-TYPE
This attribute specifies whether silence suppression is on or off.
1.3.6.1.4.1.5504.5.16.1.6.2.1.17ZhoneEnabledFlagread-createcurrent
zhoneCpeVoipSubscriberTable
OBJECT-TYPE
Cpe Voip Subscriber table for the VoIP feature.
1.3.6.1.4.1.5504.5.16.1.7not-accessiblecurrent
zhoneCpeVoipSubscriberEntry
OBJECT-TYPE
Row in the CpeVoipSubscriber table.
1.3.6.1.4.1.5504.5.16.1.7.1not-accessiblecurrent
zhoneCpeVoipSubscriberPortNumber
OBJECT-TYPE
This represents the CPE Voip Subscriber Port Number.
1.3.6.1.4.1.5504.5.16.1.7.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeVoipSubscriberRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.7.1.2ZhoneRowStatusread-createcurrent
zhoneCpeVoipSubscriberAdminState
OBJECT-TYPE
This shows the admin state for the CpeVoipSubscriber.
1.3.6.1.4.1.5504.5.16.1.7.1.3ZhoneAdminStateread-createcurrent
zhoneCpeVoipSubscriberDialNumber
OBJECT-TYPE
This attribute contains the dialing number to make the call.
1.3.6.1.4.1.5504.5.16.1.7.1.4ZhoneAdminStringread-createcurrent
zhoneCpeVoipSubscriberDisplayName
OBJECT-TYPE
This ASCII string attribute defines the customer id used for the display attribute in outgoing SIP messages.
1.3.6.1.4.1.5504.5.16.1.7.1.5OCTET STRING (SIZE(0..25))read-createcurrent
zhoneCpeVoipSubscriberUserName
OBJECT-TYPE
This attribute contains the SIP user identification used for authentication.
1.3.6.1.4.1.5504.5.16.1.7.1.6OCTET STRING (SIZE(1..50))read-createcurrent
zhoneCpeVoipSubscriberPassword
OBJECT-TYPE
This attribute contains the SIP password used for authentication.
1.3.6.1.4.1.5504.5.16.1.7.1.7OCTET STRING (SIZE(1..32))read-createcurrent
zhoneCpeVoipSubscriberImpedance
OBJECT-TYPE
This attribute specifies the impedance for the POTS UNI.
1.3.6.1.4.1.5504.5.16.1.7.1.8INTEGER {ohm600(1), ohm900(2), complex1(3), complex2(4), complex3(5)}read-createcurrent
zhoneCpeVoipSubscriberRxGain
OBJECT-TYPE
This attribute specifies a gain value for the received signal in the form of a 2s complement number. Valid values are -120 (-12.0 dB) to 60 (+6.0 dB).
1.3.6.1.4.1.5504.5.16.1.7.1.9Integer32 (-12..6)read-createcurrent
zhoneCpeVoipSubscriberTxGain
OBJECT-TYPE
This attribute specifies a gain value for the transmit signal in the form of a 2s complement number. Valid values are -120 (-12.0 dB) to 60 (+6.0 dB).
1.3.6.1.4.1.5504.5.16.1.7.1.10Integer32 (-12..6)read-createcurrent
zhoneCpeVoipSubscriberTransmissionPath
OBJECT-TYPE
This attribute allows setting the POTS UNI either to full-time on-hook transmission or part-time on-hook transmission.
1.3.6.1.4.1.5504.5.16.1.7.1.11INTEGER {fulltimeonhookxmit(1), parttimeonhookxmit(2)}read-createcurrent
zhoneCpeVoipSubscriberSignallingCode
OBJECT-TYPE
This attribute specifies the POTS-side signaling.
1.3.6.1.4.1.5504.5.16.1.7.1.12INTEGER {loopstart(1), groundstart(2), loopreversebattery(3), coinfirst(4), dialtonefirst(5), multiparty(6)}read-createcurrent
zhoneCpeVoipServerProfileIndex
OBJECT-TYPE
This attribute points to the associated cpe-voip-server profile.
1.3.6.1.4.1.5504.5.16.1.7.1.13Unsigned32 (1..2147483647)read-createcurrent
zhoneCpeVoipFeaturesProfileIndex
OBJECT-TYPE
This attribute points to the associated cpe-voip-feature profile.
1.3.6.1.4.1.5504.5.16.1.7.1.14Unsigned32 (1..2147483647)read-createcurrent
zhoneCpeVoipMediaProfileIndex
OBJECT-TYPE
This attribute points to the associated cpe-voip-media profile.
1.3.6.1.4.1.5504.5.16.1.7.1.15Unsigned32 (1..2147483647)read-createcurrent
zhoneCpeVoipSubscriberPhoneFollowsWan
OBJECT-TYPE
When enabled the phone will lose power any time the WAN is operation status of down.This will allow line monitoring equipment to detect loss of service.
1.3.6.1.4.1.5504.5.16.1.7.1.16ZhoneEnabledFlagread-createcurrent
zhoneCpeEthSubscriberTable
OBJECT-TYPE
Cpe Eth Subscriber table.
1.3.6.1.4.1.5504.5.16.1.8not-accessiblecurrent
zhoneCpeEthSubscriberEntry
OBJECT-TYPE
Row in the CpeEthSubscriber table.
1.3.6.1.4.1.5504.5.16.1.8.1not-accessiblecurrent
zhoneCpeEthSubscriberPortNumber
OBJECT-TYPE
This represents the CPE Eth Subscriber Port Number.
1.3.6.1.4.1.5504.5.16.1.8.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeEthSubscriberRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.8.1.2ZhoneRowStatusread-createcurrent
zhoneCpeEthSubscriberAdminState
OBJECT-TYPE
This attribute activates or deactivates the functions performed by the Ethernet port for this subscriber or put the port in test mode.
1.3.6.1.4.1.5504.5.16.1.8.1.3ZhoneAdminStateread-createcurrent
zhoneCpeEthSubscriberLoopback
OBJECT-TYPE
This enables or disables Ethernet loopback.
1.3.6.1.4.1.5504.5.16.1.8.1.4ZhoneEnabledFlagread-createcurrent
zhoneCpeEthSubscriberRate
OBJECT-TYPE
This attribute sets the Ethernet port rate.
1.3.6.1.4.1.5504.5.16.1.8.1.5INTEGER {auto(1), tenMbps(2), oneHundredMbps(3), oneThousandMbps(4)}read-createcurrent
zhoneCpeEthSubscriberDuplex
OBJECT-TYPE
This attribute sets the Ethernet port duplex.
1.3.6.1.4.1.5504.5.16.1.8.1.6INTEGER {auto(1), full(2), half(3)}read-createcurrent
zhoneCpeEthSubscriberMtu
OBJECT-TYPE
This attribute denotes the maximum frame size allowed across this interface.
1.3.6.1.4.1.5504.5.16.1.8.1.7Unsigned32 (0..65535)read-createcurrent
zhoneCpeEthSubscriberPortType
OBJECT-TYPE
This attribute specifies the Ethernet interface wiring.
1.3.6.1.4.1.5504.5.16.1.8.1.8INTEGER {dce(1), dte(2)}read-createcurrent
zhoneCpeEthSubscriberPauseTime
OBJECT-TYPE
This attribute allows the interface to ask the subscriber terminal to temporarily suspend sending data. Units are in pause quanta (1 pause quantum is 512 bit times of the particular implementation).
1.3.6.1.4.1.5504.5.16.1.8.1.9Unsigned32 (0..65535)read-createcurrent
zhoneCpeEthSubscriberMode
OBJECT-TYPE
This attribute specifies whether the Ethernet interface is bridged or derived from an IP router function.
1.3.6.1.4.1.5504.5.16.1.8.1.10INTEGER {bridged(1), routed(2)}read-createcurrent
zhoneCpeEthSubscriberPowerFeed
OBJECT-TYPE
This attribute controls whether power is provided to an external equipment over the Ethernet interface.
1.3.6.1.4.1.5504.5.16.1.8.1.11ZhoneEnabledFlagread-createcurrent
zhoneCpeVideoProfileIndex
OBJECT-TYPE
This object points to the associated video profile.
1.3.6.1.4.1.5504.5.16.1.8.1.12Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeTrafficManagementProfileIndex
OBJECT-TYPE
This object points to the associated Traffic Management profile. If there is no traffic control for the UNI, set it to 0.
1.3.6.1.4.1.5504.5.16.1.8.1.13Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeEthSubscriberLineStatusAlarm
OBJECT-TYPE
This field is for enabling/disabling alarm reporting from this CPE UNI.
1.3.6.1.4.1.5504.5.16.1.8.1.14ZhoneEnabledFlagread-createcurrent
zhoneCpeEthSubscriberAlarmSeverity
OBJECT-TYPE
This field is for specifying the severity level of all the alarms from this CPE UNI.
1.3.6.1.4.1.5504.5.16.1.8.1.15ZhoneAlarmSeverityread-createcurrent
zhoneCpeEthSubscriberPowerShed
OBJECT-TYPE
When zhoneCpeSystemCommonPowerShutdownDelay is non-zero and the unit is operating on Battery Power during an AC power outage, this option controls the Enable/Disable state of each Ethernet port. Ports with Power Shedding State as Enabled will remain operational on Battery Power, while Disabled ports will be shut down to conserve battery power.
1.3.6.1.4.1.5504.5.16.1.8.1.16ZhoneEnabledFlagread-createcurrent
zhoneCpeEthSubscriberPowerRange
OBJECT-TYPE
Maximum PoE ( Power over ethernet ) Power allowed per port. When disabled, no PoE Power will be provided.
1.3.6.1.4.1.5504.5.16.1.8.1.17INTEGER {disabled(1), low(2), medium(3), high(4)}read-createcurrent
zhoneCpeEthSubscriberLldpMedList
OBJECT-TYPE
A list of cpe-lldp-med-policy profiles.
1.3.6.1.4.1.5504.5.16.1.8.1.18Unsigned32read-createcurrent
zhoneCpeVideo
OBJECT-IDENTITY
Cpe Video objects.
1.3.6.1.4.1.5504.5.16.1.9current
zhoneCpeVideoIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeVideoIndex when creating entries in the zhoneCpeVideoTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeVideoIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.9.1Integer32read-onlycurrent
zhoneCpeVideoTable
OBJECT-TYPE
Cpe Video table.
1.3.6.1.4.1.5504.5.16.1.9.2not-accessiblecurrent
zhoneCpeVideoEntry
OBJECT-TYPE
Row in the Cpe Video table.
1.3.6.1.4.1.5504.5.16.1.9.2.1not-accessiblecurrent
zhoneCpeVideoIndex
OBJECT-TYPE
This represents the CPE Video Index.
1.3.6.1.4.1.5504.5.16.1.9.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeGemPort
OBJECT-TYPE
This represents the CPE GEM Port Index.
1.3.6.1.4.1.5504.5.16.1.9.2.1.2Unsigned32 (0..4095)not-accessiblecurrent
zhoneCpeVlan
OBJECT-TYPE
This represents the CPE Vlan Id.
1.3.6.1.4.1.5504.5.16.1.9.2.1.3Unsigned32 (0..4095)not-accessiblecurrent
zhoneCpeVideoRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.9.2.1.4ZhoneRowStatusread-createcurrent
zhoneCpeVideoProfileName
OBJECT-TYPE
CPE Video profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.9.2.1.5ZhoneAdminStringread-createcurrent
zhoneCpeVideoMaxSimultaneousGroups
OBJECT-TYPE
This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed.
1.3.6.1.4.1.5504.5.16.1.9.2.1.6Unsigned32 (0..65535)read-createcurrent
zhoneCpeVideoMaxMulticastBandwidth
OBJECT-TYPE
This attribute specifies the maximum imputed dynamic bandwidth, in bytes per second, that may be delivered to the client port at anyone time. The default value 0 specifies that no administrative limit is to be imposed.
1.3.6.1.4.1.5504.5.16.1.9.2.1.7Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeVideoBandwidthEnforce
OBJECT-TYPE
The default value of this boolean attribute is false, and specifies that attempts to exceed the max multicast bandwidth be counted but honored. The value true specifies that such attempts be counted and denied. The imputed bandwidth value is taken from the dynamic access control list table, both for a new join request and for pre-existing groups.
1.3.6.1.4.1.5504.5.16.1.9.2.1.8TruthValueread-createcurrent
zhoneCpeVideoIgmpVersion
OBJECT-TYPE
This attribute specifies the version of the IGMP to be supported.
1.3.6.1.4.1.5504.5.16.1.9.2.1.9INTEGER {version1(1), version2(2), version3(3)}read-createcurrent
zhoneCpeVideoIgmpFunction
OBJECT-TYPE
This attribute enables an IGMP function - transparent IGMP snooping only, snooping with proxy reporting (SPR) and IGMP proxy. The function must be consistent with the capabilities specified by the other IGMP configuration attributes.
1.3.6.1.4.1.5504.5.16.1.9.2.1.10INTEGER {transparentsnooping(1), snoopwithproxy(2), proxy(3)}read-createcurrent
zhoneCpeVideoImmediateLeave
OBJECT-TYPE
This attribute enables or disables the immediate leave function.
1.3.6.1.4.1.5504.5.16.1.9.2.1.11ZhoneEnabledFlagread-createcurrent
zhoneCpeVideoUpstreamIgmpRate
OBJECT-TYPE
This attribute limits the maximum rate of upstream IGMP traffic. Traffic in excess of this limit is silently discarded. The attribute value is specified in messages/second. The default value 0 imposes no rate limit on this traffic.
1.3.6.1.4.1.5504.5.16.1.9.2.1.12Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeVideoRobustness
OBJECT-TYPE
This attribute allows tuning for possible packet loss in the network. The default value 0 causes the ONT to follow the IETF recommendation to copy the robustness value from query messages originating further upstream.
1.3.6.1.4.1.5504.5.16.1.9.2.1.13Unsigned32 (0..255)read-createcurrent
zhoneCpeVideoAccessControlList
OBJECT-TYPE
This attribute points to a access control group list. The default value 0 indicates no control list is used.
1.3.6.1.4.1.5504.5.16.1.9.2.1.14Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeVideoAccessControl
OBJECT-IDENTITY
Cpe Video Access Control objects.
1.3.6.1.4.1.5504.5.16.1.10current
zhoneCpeVideoAccessControlIndexTable
OBJECT-TYPE
Table of next available index values for CPE video access control profile.
1.3.6.1.4.1.5504.5.16.1.10.1not-accessiblecurrent
zhoneCpeVideoAccessControlIndexEntry
OBJECT-TYPE
Row in the zhoneCpeVideoAccessControlIndexTable.
1.3.6.1.4.1.5504.5.16.1.10.1.1not-accessiblecurrent
zhoneCpeVideoAccessControlIndexNext
OBJECT-TYPE
This represents the next available index value for video access control profile. When 30 cpe-video-access-control profiles are configured this field wil give zero as next available index.
1.3.6.1.4.1.5504.5.16.1.10.1.1.1Unsigned32 (1..2147483647)read-onlycurrent
zhoneCpeVideoAccessControlTable
OBJECT-TYPE
Cpe Video Access Control table.
1.3.6.1.4.1.5504.5.16.1.10.2not-accessiblecurrent
zhoneCpeVideoAccessControlEntry
OBJECT-TYPE
Row in the Cpe Video Access Control table.
1.3.6.1.4.1.5504.5.16.1.10.2.1not-accessiblecurrent
zhoneCpeVideoAccessControlListIndex
OBJECT-TYPE
This represents the CPE Video Access Control List Index.
1.3.6.1.4.1.5504.5.16.1.10.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeVideoAccessControlEntryIndex
OBJECT-TYPE
This represents the CPE Video Access Control Entry Index.
1.3.6.1.4.1.5504.5.16.1.10.2.1.2Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeVideoAccessControlRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.10.2.1.3ZhoneRowStatusread-createcurrent
zhoneCpeVideoAccessControlProfileName
OBJECT-TYPE
CPE Video profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.10.2.1.4ZhoneAdminStringread-createcurrent
zhoneCpeVideoAccessControlType
OBJECT-TYPE
This attribute defines the video stream type.
1.3.6.1.4.1.5504.5.16.1.10.2.1.5INTEGER {normal(1), alwayson(2), periodic(3)}read-createcurrent
zhoneCpeVideoAccessControlSrcIp
OBJECT-TYPE
This is the source IP address. Default value is 0.0.0.0, it specifies that the source IP address is to be ignored.
1.3.6.1.4.1.5504.5.16.1.10.2.1.6IpAddressread-createcurrent
zhoneCpeVideoAccessControlDstIpStart
OBJECT-TYPE
Destination IP address of the start of the multicast range. Default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.10.2.1.7IpAddressread-createcurrent
zhoneCpeVideoAccessControlDstIpEnd
OBJECT-TYPE
Destination IP address of the end of the multicast range. Default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.10.2.1.8IpAddressread-createcurrent
zhoneCpeVideoAccessControlImputedGroupBw
OBJECT-TYPE
Expressed in bytes/sec, the imputed group bandwidth is used to decide whether or not to honor a join request in the presence of a max multicast bandwidth limit. The default value 0 effectively allows this table entry to avoid max bandwidth limitations.
1.3.6.1.4.1.5504.5.16.1.10.2.1.9Unsigned32 (0..2147483647)read-createcurrent
zhoneCpePweSubscriberTable
OBJECT-TYPE
Cpe Pwe Subscriber table.
1.3.6.1.4.1.5504.5.16.1.11not-accessiblecurrent
zhoneCpePweSubscriberEntry
OBJECT-TYPE
Row in the CpePweSubscriber table.
1.3.6.1.4.1.5504.5.16.1.11.1not-accessiblecurrent
zhoneCpePweSubscriberPortNumber
OBJECT-TYPE
This represents the CPE Pwe Subscriber Port Number.
1.3.6.1.4.1.5504.5.16.1.11.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpePweSubscriberRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.11.1.2ZhoneRowStatusread-createcurrent
zhoneCpePweSubscriberAdminState
OBJECT-TYPE
This attribute activates or deactivates the functions performed by the CES port for this subscriber or puts the port in test mode.
1.3.6.1.4.1.5504.5.16.1.11.1.3ZhoneAdminStateread-createcurrent
zhoneCpePweSubscriberLoopback
OBJECT-TYPE
This attribute specifies and reports the loopback configuration of the physical interface.
1.3.6.1.4.1.5504.5.16.1.11.1.4INTEGER {noloop(1), payload(2), line(3), ponside(4), cesside(5)}read-createcurrent
zhoneCpePweSubscriberNearEndPort
OBJECT-TYPE
When the pseudowire service is transported via IP, this attribute specifies the port number of the near-end TCP/UDP service. The default value is 57000 + port number.
1.3.6.1.4.1.5504.5.16.1.11.1.5Unsigned32 (0..65535)read-createcurrent
zhoneCpePweSubscriberFarEndIp
OBJECT-TYPE
When the pseudowire service is transported via IP, this attribute specifies the IP or resolved name of the far-end termination point.
1.3.6.1.4.1.5504.5.16.1.11.1.6IpAddressread-createcurrent
zhoneCpePweSubscriberFarEndPort
OBJECT-TYPE
When the pseudowire service is transported via IP, this attribute specifies the port number of the far-end TCP/UDP service. The default value is 57000 + port number.
1.3.6.1.4.1.5504.5.16.1.11.1.7Unsigned32 (0..65535)read-createcurrent
zhoneCpePweSubscriberLineLength
OBJECT-TYPE
This attribute specifies the length of the twisted pair cable from a DS1 physical UNI to the DSX-1 cross-connect point.
1.3.6.1.4.1.5504.5.16.1.11.1.8Unsigned32 (0..65535)read-createcurrent
zhoneCpePweProfileIndex
OBJECT-TYPE
This attribute points to the associated PWE profile. 1 indicates a default profile is used.
1.3.6.1.4.1.5504.5.16.1.11.1.9Unsigned32 (1..2147483647)read-createcurrent
zhoneCpePweSubscriberLineStatusAlarm
OBJECT-TYPE
This field is for enabling/disabling alarm reporting from this CPE UNI.
1.3.6.1.4.1.5504.5.16.1.11.1.10ZhoneEnabledFlagread-createcurrent
zhoneCpePweSubscriberAlarmSeverity
OBJECT-TYPE
This field is for specifying the severity level of all the alarms from this CPE UNI.
1.3.6.1.4.1.5504.5.16.1.11.1.11ZhoneAlarmSeverityread-createcurrent
zhoneCpePwe
OBJECT-IDENTITY
Cpe Pwe objects.
1.3.6.1.4.1.5504.5.16.1.12current
zhoneCpePweIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpePweIndex when creating entries in the zhoneCpePweTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpePweIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.12.1Integer32read-onlycurrent
zhoneCpePweTable
OBJECT-TYPE
Cpe Pwe table.
1.3.6.1.4.1.5504.5.16.1.12.2not-accessiblecurrent
zhoneCpePweEntry
OBJECT-TYPE
Row in the CpePwe table.
1.3.6.1.4.1.5504.5.16.1.12.2.1not-accessiblecurrent
zhoneCpePweIndex
OBJECT-TYPE
This represents the CPE Pwe Index.
1.3.6.1.4.1.5504.5.16.1.12.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpePweRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.12.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpePweProfileName
OBJECT-TYPE
CPE Pwe profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.12.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpePweLineType
OBJECT-TYPE
This attribute specifies the line type (T1, E1 or other) used.
1.3.6.1.4.1.5504.5.16.1.12.2.1.4INTEGER {ds1(1), e1(2), other(3)}read-createcurrent
zhoneCpePweEncoding
OBJECT-TYPE
This attribute specifies the line coding scheme.
1.3.6.1.4.1.5504.5.16.1.12.2.1.5INTEGER {b8zs(1), ami(2), hdb3(3), b3zs(4)}read-createcurrent
zhoneCpePweDs1Mode
OBJECT-TYPE
This attribute specifies the mode of a DS1.
1.3.6.1.4.1.5504.5.16.1.12.2.1.6INTEGER {shorthaulnopwr(1), longhaulnopwr(2), niulonghaulnopwr(3), niulonghaulpwr(4)}read-createcurrent
zhoneCpePweDs1Framing
OBJECT-TYPE
This attribute specifies the DS1 framing structure.
1.3.6.1.4.1.5504.5.16.1.12.2.1.7INTEGER {extsuperframe(1), superframe(2), unframed(3), g704(4), jtg704(5)}read-createcurrent
zhoneCpePweTransport
OBJECT-TYPE
The underlying transport for the Pseudowire service.
1.3.6.1.4.1.5504.5.16.1.12.2.1.8INTEGER {ethernet(1), udp(2), mpls(3)}read-createcurrent
zhoneCpePweServiceType
OBJECT-TYPE
This attribute specifies the basic service type, either a transparent bit pipe or an encapsulation that recognizes the underlying structure of the payload.
1.3.6.1.4.1.5504.5.16.1.12.2.1.9INTEGER {unstructured(1), octetalignedunstruct(2), structured(3)}read-createcurrent
zhoneCpePweSignalling
OBJECT-TYPE
This attribute specifies how CAS signalling is carried.
1.3.6.1.4.1.5504.5.16.1.12.2.1.10INTEGER {nosignalling(1), inbandcas(2), outofbandcas(3)}read-createcurrent
zhoneCpePwePayloadSize
OBJECT-TYPE
Number of payload bytes per packet. Valid only if service type = unstructured or unstructured octet-aligned. Valid choices depend on the TDM service, but must include the following. Other choices are at the vendor's discretion. DS1 192 DS1 200, required only if unstructured octet aligned service is supported E1 256 DS3 1024 E3 1024
1.3.6.1.4.1.5504.5.16.1.12.2.1.11Unsigned32 (0..65535)read-createcurrent
zhoneCpePwePayloadEncapsulationDelay
OBJECT-TYPE
This represents number of 125 microsecond frames to be encapsulated in each pseudowire packet. Valid only if service type = structured. The minimum set of choices for various TDM services is listed below, and is affected by the possible presence of in-band signalling. Other choices are at the vendor discretion. NxDS0, no signalling, N = 1 64 (8 ms) required, 40 (5 ms) desired NxDS0, no signalling, N = 2..4 32 (4 ms) NxDS0, no signalling, N > 4 8 (1 ms) NxDS0 with DS1 CAS 24 (3 ms) NxDS0 with E1 CAS 16 (2 ms)
1.3.6.1.4.1.5504.5.16.1.12.2.1.12INTEGER {nosignallingandNvalueis1(1), nosignallingandNvalueis2to4(2), nosignallingandNvalueisgreaterthan4(3), ds1cas(4), e1cas(5)}read-createcurrent
zhoneCpePweTimingMode
OBJECT-TYPE
This attribute selects the timing mode of the TDM service. If RTP is used, this attribute must be set to be consistent with the value of the RTP time stamp mode attribute in the RTP parameters managed entity at the far end. 1 Network timing 2 Differential timing 3 Adaptive timing (default) 4 Loop timing: local TDM transmit clock derived from local TDM receive stream
1.3.6.1.4.1.5504.5.16.1.12.2.1.13INTEGER {network(1), differential(2), adaptive(3), loop(4)}read-createcurrent
zhoneCpePweChannelAssign
OBJECT-TYPE
If service type is structured, this attribute is a bit field indicating the 64kbps sub channels are used. This is not supported currently. The default value is channel0, but it might change later.
1.3.6.1.4.1.5504.5.16.1.12.2.1.14Bits {channel0(0), channel1(1), channel2(2), channel3(3), channel4(4), channel5(5), channel6(6), channel7(7), channel8(8), channel9(9), channel10(10), channel11(11), channel12(12), channel13(13), channel14(14), channel15(15), channel16(16), channel17(17), channel18(18), channel19(19), channel20(20), channel21(21), channel22(22), channel23(23), channel24(24), channel25(25), channel26(26), channel27(27), channel28(28), channel29(29), channel30(30), channel31(31)}read-createcurrent
zhoneCpePweClockReference
OBJECT-TYPE
This attribute specifies the frequency of the common timing reference, in multiples of 8 kHz. The default value is 1 (8 kHz).
1.3.6.1.4.1.5504.5.16.1.12.2.1.15Unsigned32 (1..65535)read-createcurrent
zhoneCpePweRtpTimeStampMode
OBJECT-TYPE
This attribute determines the mode in which RTP timestamps are generated in the TDM to PSN direction.
1.3.6.1.4.1.5504.5.16.1.12.2.1.16INTEGER {unknown(1), absolute(2), differential(3)}read-createcurrent
zhoneCpePwePtypePayload
OBJECT-TYPE
This attribute specifies the RTP payload type for the payload channel in the TDM to PSN direction. Assignable PTYPEs lie in the dynamic range 96..127.
1.3.6.1.4.1.5504.5.16.1.12.2.1.17Unsigned32 (96..127)read-createcurrent
zhoneCpePwePtypeSignalling
OBJECT-TYPE
This attribute specifies the RTP payload type direction for the signaling channel in the TDM to PSN. Assignable PTYPEs lie in the dynamic range 96..127. If signalling is not transported in its own channel, the value should be set to 0. So the valid values used are 0, 96-127.
1.3.6.1.4.1.5504.5.16.1.12.2.1.18Unsigned32 (0..127)read-createcurrent
zhoneCpePweSSrcPayload
OBJECT-TYPE
This attribute specifies the RTP synchronization source for the payload channel in the TDM to PSN direction.
1.3.6.1.4.1.5504.5.16.1.12.2.1.19Unsigned32 (0..2147483647)read-createcurrent
zhoneCpePweSSrcSignalling
OBJECT-TYPE
This attribute specifies the RTP synchronization source for the signaling channel in the TDM to PSN direction. If signalling is not transported in its own channel, this value should be set to 0.
1.3.6.1.4.1.5504.5.16.1.12.2.1.20Unsigned32 (0..2147483647)read-createcurrent
zhoneCpePweExpectedPTypePayload
OBJECT-TYPE
This attribute specifies the RTP payload type for the payload channel in the PSN to TDM direction. The received payload type may be used to detect malformed packets. To disable the check functions, set the value to its default value 0.
1.3.6.1.4.1.5504.5.16.1.12.2.1.21Unsigned32 (0..255)read-createcurrent
zhoneCpePweExpectedPTypeSignalling
OBJECT-TYPE
This attribute specifies the RTP payload type for the signaling channel in the PSN to TDM direction. The received payload type may be used to detect malformed packets. To disable the check functions, set the value to its default value 0.
1.3.6.1.4.1.5504.5.16.1.12.2.1.22Unsigned32 (0..255)read-createcurrent
zhoneCpePweExpectedSSrcPayload
OBJECT-TYPE
This attribute specifies the RTP synchronization source in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). To disable the check functions, set the value to its default value 0.
1.3.6.1.4.1.5504.5.16.1.12.2.1.23Unsigned32 (0..2147483647)read-createcurrent
zhoneCpePweExpectedSSrcSignalling
OBJECT-TYPE
This attribute specifies the RTP synchronization source for the signalling channel in the PSN to TDM direction. The received SSRC may be used to detect misconnection (stray packets). To disable the check functions, set the value to its default value 0.
1.3.6.1.4.1.5504.5.16.1.12.2.1.24Unsigned32 (0..2147483647)read-createcurrent
zhoneCpePweJitterBufMax
OBJECT-TYPE
This attribute specifies the desired maximum depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 micro second frame rate. The value 0 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.25Unsigned32 (0..65535)read-createcurrent
zhoneCpePweJitterBufDesired
OBJECT-TYPE
This attribute specifies the desired nominal fill depth of the playout buffer in the PSN to TDM direction. The value is expressed as a multiple of the 125 micro second frame rate. The value 0 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.26Unsigned32 (0..65535)read-createcurrent
zhoneCpePweFillPolicy
OBJECT-TYPE
This attribute defines the payload bit pattern to be applied toward the TDM service if no payload packet is available to play out. The default value 1 specifies that the ONT apply its internal policy, ie vendor-specific.
1.3.6.1.4.1.5504.5.16.1.12.2.1.27INTEGER {vendorspecific(1), ais(2), allones(3), allzeros(4), repeatprevdata(5), ds1idle(6)}read-createcurrent
zhoneCpePweMisconnectedDeclarePolicy
OBJECT-TYPE
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.28Unsigned32 (0..100)read-createcurrent
zhoneCpePweMisconnectedClearPolicy
OBJECT-TYPE
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.29Unsigned32 (0..255)read-createcurrent
zhoneCpePweLossPacketDeclarePolicy
OBJECT-TYPE
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.30Unsigned32 (0..100)read-createcurrent
zhoneCpePweLossPacketClearPolicy
OBJECT-TYPE
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.31Unsigned32 (0..255)read-createcurrent
zhoneCpePweOverrunUnderrunDeclarePolicy
OBJECT-TYPE
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.32Unsigned32 (0..100)read-createcurrent
zhoneCpePweOverrunUnderrunClearPolicy
OBJECT-TYPE
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.33Unsigned32 (0..255)read-createcurrent
zhoneCpePweMalformedDeclarePolicy
OBJECT-TYPE
The alarm declaration policy attribute defines the anomaly rate that causes the corresponding alarm to be declared. It is an integer percentage between 1..100. If this density of anomalies occurs during the alarm onset soak interval, the alarm is declared. The default value 0 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.34Unsigned32 (0..100)read-createcurrent
zhoneCpePweMalformedClearPolicy
OBJECT-TYPE
The alarm clear policy attribute defines the anomaly rate that causes the correcponding alarm to be cleared. It is an integer percentage between 0..99. If no more than this density of anomalies occurs during the alarm clear soak interval, the alarm is cleared. The default value 255 selects the ONT's internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.35Unsigned32 (0..255)read-createcurrent
zhoneCpePweRBitTransmitSetPolicy
OBJECT-TYPE
This attribute defines the number of consecutive lost packets that causes the transmitted R bit to be set in the TDM to PSN direction, indicating lost packets to the far end. The default value 0 selects the ONT internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.36Unsigned32 (0..255)read-createcurrent
zhoneCpePweRBitTransmitClearPolicy
OBJECT-TYPE
This attribute defines the number of consecutive valid packets that causes the transmitted R bit to be cleared in the TDM to PSN direction, removing the remote failure indication to the far end. The default value 0 selects the ONT internal policy.
1.3.6.1.4.1.5504.5.16.1.12.2.1.37Unsigned32 (0..255)read-createcurrent
zhoneCpePweRBitReceivePolicy
OBJECT-TYPE
This attribute defines the action toward the Nx64 TDM interface when remote failure is indicated on packets received from the PSN.
1.3.6.1.4.1.5504.5.16.1.12.2.1.38INTEGER {nothing(1), alarm(2), idlechannel(3)}read-createcurrent
zhoneCpePweLBitReceivePolicy
OBJECT-TYPE
This attribute defines the action toward the TDM interface when far end TDM failure is indicated on packets received from the PSN.
1.3.6.1.4.1.5504.5.16.1.12.2.1.39INTEGER {ais(1), repeatlastpkt(2), idlechannel(3)}read-createcurrent
zhoneCpePweSesThreshold
OBJECT-TYPE
Number of lost, malformed or otherwise unusable packets expected in the PSN to TDM direction within a one-second interval that causes a severely errored second to be counted. Stray packets do not count toward a severely errored second, nor do packets whose L bit is set at the far end. The default value is 3.
1.3.6.1.4.1.5504.5.16.1.12.2.1.40Unsigned32 (0..65535)read-createcurrent
zhoneCpePweCdvTolerance
OBJECT-TYPE
This attribute represents the duration of user data that must be buffered by the CES interworking entity to offset packet delay variation. It is expressed in 10 microsecond increments. The default value for DS1 CES is 750 micro seconds; for DS3 CES, it is 1000 micro seconds.
1.3.6.1.4.1.5504.5.16.1.12.2.1.41Unsigned32 (0..65535)read-createcurrent
zhoneCpePweChannelAssociatedSignalling
OBJECT-TYPE
This attribute selects the signalling format. It applies to structured interfaces only.
1.3.6.1.4.1.5504.5.16.1.12.2.1.42INTEGER {base(1), e1cas(2), sfcas(3), ds1esfcas(4), j2cas(5)}read-createcurrent
zhoneCpePweMplsTpType
OBJECT-TYPE
This attribute specifies the type of ANI-side termination for the MPLS Pseudowire.
1.3.6.1.4.1.5504.5.16.1.12.2.1.43INTEGER {ethernet(1), gem(2)}read-createcurrent
zhoneCpePweDscp
OBJECT-TYPE
This parameter indicates DSCP value for cpe pwe traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
1.3.6.1.4.1.5504.5.16.1.12.2.1.44OCTET STRING (SIZE(1..8))read-createcurrent
zhoneCpeOnuModelInfoTable
OBJECT-TYPE
Cpe Onu Model Info table.
1.3.6.1.4.1.5504.5.16.1.13not-accessiblecurrent
zhoneCpeOnuModelInfoEntry
OBJECT-TYPE
Row in the CpeOnuModelInfo table.
1.3.6.1.4.1.5504.5.16.1.13.1not-accessiblecurrent
zhoneCpeOnuModelInfoIndex
OBJECT-TYPE
This represents the CpeOnuModelInfo Index.
1.3.6.1.4.1.5504.5.16.1.13.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeOnuModelName
OBJECT-TYPE
This repesents the Onu Model name.
1.3.6.1.4.1.5504.5.16.1.13.1.2ZhoneAdminStringread-onlycurrent
zhoneCpeOnuBatteryBackup
OBJECT-TYPE
This represents the Onu battery backup.
1.3.6.1.4.1.5504.5.16.1.13.1.3TruthValueread-onlycurrent
zhoneCpeOnuSipPlarSupported
OBJECT-TYPE
This represents whether SipPlar is supported on this ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.4TruthValueread-onlycurrent
zhoneCpeOnuEthSlotNumber
OBJECT-TYPE
This represents the Onu ethernet slot number.
1.3.6.1.4.1.5504.5.16.1.13.1.5Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuNumberOfEthPorts
OBJECT-TYPE
This represents the number of ethernet ports on an ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.6Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuPotsSlotNumber
OBJECT-TYPE
This represents the Onu Pots Slot Number.
1.3.6.1.4.1.5504.5.16.1.13.1.7Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuNumberOfPotsPorts
OBJECT-TYPE
This represents the number of Pots ports on an ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.8Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuRfVideoSlotNumber
OBJECT-TYPE
This represents the Onu RfVideo slot number.
1.3.6.1.4.1.5504.5.16.1.13.1.9Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuNumberOfRfVideoPorts
OBJECT-TYPE
This represents the number of RfVideo ports.
1.3.6.1.4.1.5504.5.16.1.13.1.10Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuCesSlotNumber
OBJECT-TYPE
This represents the Onu Ces slot number.
1.3.6.1.4.1.5504.5.16.1.13.1.11Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuNumberOfCesPorts
OBJECT-TYPE
This represents the number of Ces ports on an ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.12Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeOnuModelInfoRGBridged
OBJECT-TYPE
If TRUE, layer 2 bridging can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, VoIP can be configured via OMCI as well.
1.3.6.1.4.1.5504.5.16.1.13.1.13TruthValueread-onlycurrent
zhoneCpeOnuNumberOfWlanPorts
OBJECT-TYPE
This represents the number of Wlan ports on an ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.14Unsigned32read-onlycurrent
zhoneCpeOnuModelInfoRg
OBJECT-TYPE
If TRUE, CPE is capable of providing RG (residential gateway) services.
1.3.6.1.4.1.5504.5.16.1.13.1.15TruthValueread-onlycurrent
zhoneCpeOnuModelInfoRgVoip
OBJECT-TYPE
If TRUE, VoIP can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, VoIP can be configured via OMCI as well.
1.3.6.1.4.1.5504.5.16.1.13.1.16TruthValueread-onlycurrent
zhoneCpeOnuModelInfoRgPwe
OBJECT-TYPE
If TRUE, PWE can only be configured via a RG management interface such as SNMP, TR-69, CLI or Web UI. Otherwise, PWE can be configured via OMCI as well.
1.3.6.1.4.1.5504.5.16.1.13.1.17TruthValueread-onlycurrent
zhoneCpeOnuModelInfoTftpDnld
OBJECT-TYPE
If TRUE, then this model support software image download via TFTP. Otherwise, only OMCI downloads are supported.
1.3.6.1.4.1.5504.5.16.1.13.1.18TruthValueread-onlycurrent
zhoneCpeOnuSipSupported
OBJECT-TYPE
This represents whether Sip is supported on this ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.19TruthValueread-onlycurrent
zhoneCpeOnuH248Supported
OBJECT-TYPE
This represents whether H248 is supported on this ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.20TruthValueread-onlycurrent
zhoneCpeOnuMgcpSupported
OBJECT-TYPE
This represents whether MGCP is supported on this ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.21TruthValueread-onlycurrent
zhoneCpeOnuT1Supported
OBJECT-TYPE
This represents whether T1 is supported on this ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.22TruthValueread-onlycurrent
zhoneCpeOnuE1Supported
OBJECT-TYPE
This represents whether E1 is supported on this ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.23TruthValueread-onlycurrent
zhoneCpeOnuNumberOfPoEPorts
OBJECT-TYPE
This represents the number of Power over Ethernet ports on an ONU.
1.3.6.1.4.1.5504.5.16.1.13.1.24Unsigned32 (0..2147483647)read-onlycurrent
zhoneCpeConnectionTable
OBJECT-TYPE
This table stores information about the connection between a logical or physical interface on the managing device and a port on the CPE.
1.3.6.1.4.1.5504.5.16.1.14not-accessiblecurrent
zhoneCpeConnectionEntry
OBJECT-TYPE
Row in the CPE Connection table.
1.3.6.1.4.1.5504.5.16.1.14.1not-accessiblecurrent
zhoneCpePortIfIndex
OBJECT-TYPE
ifIndex of the port on which this connection is based. For a GPON connection, this is the GEM port ifIndex.
1.3.6.1.4.1.5504.5.16.1.14.1.1InterfaceIndexnot-accessiblecurrent
zhoneCpeTpType
OBJECT-TYPE
TpType identifies the type of termination point associated with this MAC bridge port.
1.3.6.1.4.1.5504.5.16.1.14.1.2TpTypenot-accessiblecurrent
zhoneCpeTpIndex
OBJECT-TYPE
TpIndex identifies the Index of termination point associated with this MAC bridge port.
1.3.6.1.4.1.5504.5.16.1.14.1.3Unsigned32 (0..255)not-accessiblecurrent
zhoneCpeVlanId
OBJECT-TYPE
The Virtual LAN Id for VLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.4Unsigned32 (0..4096)not-accessiblecurrent
zhoneCpeSlanId
OBJECT-TYPE
The Secure LAN Id for SLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.5Unsigned32 (0..4096)not-accessiblecurrent
zhoneCpeConnectionRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.14.1.6ZhoneRowStatusread-createcurrent
zhoneCpeConnectionVlanCos
OBJECT-TYPE
The Class-Of-Service (COS) value used for VLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.7Unsigned32 (0..8)read-createcurrent
zhoneCpeConnectionVlanTpId
OBJECT-TYPE
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are : 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
1.3.6.1.4.1.5504.5.16.1.14.1.8Unsigned32 (33024 | 34984 | 37120 | 37376)read-createcurrent
zhoneCpeConnectionSlanCos
OBJECT-TYPE
The Class-Of-Service (COS) value used for SLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.9Unsigned32 (0..8)read-createcurrent
zhoneCpeConnectionSlanTpId
OBJECT-TYPE
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
1.3.6.1.4.1.5504.5.16.1.14.1.10Unsigned32 (33024 | 34984 | 37120 | 37376)read-createcurrent
zhoneCpeConnectionTranslateVlanId
OBJECT-TYPE
The Virtual LAN Id for VLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.11Unsigned32 (0..4096)read-createcurrent
zhoneCpeConnectionTranslateVlanCos
OBJECT-TYPE
The Class-Of-Service (COS) value used for VLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.12Unsigned32 (0..8)read-createcurrent
zhoneCpeConnectionTranslateVlanTpId
OBJECT-TYPE
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
1.3.6.1.4.1.5504.5.16.1.14.1.13Unsigned32 (33024 | 34984 | 37120 | 37376)read-createcurrent
zhoneCpeConnectionTranslateSlanId
OBJECT-TYPE
The Secure LAN Id for SLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.14Unsigned32 (0..4096)read-createcurrent
zhoneCpeConnectionTranslateSlanCos
OBJECT-TYPE
The Class-Of-Service (COS) value used for SLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.14.1.15Unsigned32 (0..8)read-createcurrent
zhoneCpeConnectionTranslateSlanTpId
OBJECT-TYPE
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default.). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
1.3.6.1.4.1.5504.5.16.1.14.1.16Unsigned32 (33024 | 34984 | 37120 | 37376)read-createcurrent
zhoneCpeConnectionFloodingGport
OBJECT-TYPE
This is the downstream only GEM port for broadcast unknown MAC address packets.
1.3.6.1.4.1.5504.5.16.1.14.1.17Unsigned32 (0..4095)read-createcurrent
zhoneCpeConnectionVideoGport
OBJECT-TYPE
This is the downstream only multicast GEM port for IPTV content streams.
1.3.6.1.4.1.5504.5.16.1.14.1.18Unsigned32 (0..4095)read-createcurrent
zhoneCpeConnectionDscpToCosProfileIndex
OBJECT-TYPE
Index of dscp-to-cos profile.
1.3.6.1.4.1.5504.5.16.1.14.1.19Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeConnectionRgMode
OBJECT-TYPE
Use to specify the RG service for a CPE. When creating or deleting a CPE connection, if the CPE does not support RG service then this object should not be provided. If a CPE does support RG service then this object must be provided. When reading this object, the value returned will be 'notApplicable'. This data is not preserved in the CPE connection profile.
1.3.6.1.4.1.5504.5.16.1.14.1.20INTEGER {routed(1), brouted(2), rpppoe(3), bpppoe(4), bridged(5), notApplicable(6)}read-createcurrent
zhoneCpeConnectionGuidedVlanId
OBJECT-TYPE
The Guided VLAN Id for RG Services. A zero value means a guided vlan does not exist. If a guided vlan is used then uni-vlan and uni-slan values must be zero.
1.3.6.1.4.1.5504.5.16.1.14.1.21Unsigned32 (0..4096)read-createcurrent
zhoneCpeConnectionGuidedCos
OBJECT-TYPE
The Guided Class-Of-Service (COS) value used for RG SERVICES. A zero means a guided cos does not exist.
1.3.6.1.4.1.5504.5.16.1.14.1.22Unsigned32 (0..8)read-createcurrent
zhoneCpeRfSubscriberTable
OBJECT-TYPE
Cpe Rf Subscriber table.
1.3.6.1.4.1.5504.5.16.1.15not-accessiblecurrent
zhoneCpeRfSubscriberEntry
OBJECT-TYPE
Row in the Cpe Rf Subscriber table.
1.3.6.1.4.1.5504.5.16.1.15.1not-accessiblecurrent
zhoneCpeRfSubscriberPortNumber
OBJECT-TYPE
This represents the CPE Rf Subscriber port number.
1.3.6.1.4.1.5504.5.16.1.15.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeRfSubscriberRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.15.1.2ZhoneRowStatusread-createcurrent
zhoneCpeRfSubscriberAdminState
OBJECT-TYPE
This attribute activates or deactivates the functions performed by the RF port for this subscriber or put the port in test mode.
1.3.6.1.4.1.5504.5.16.1.15.1.3ZhoneAdminStateread-createcurrent
zhoneCpeRfSubscriberLineStatusAlarm
OBJECT-TYPE
This field is for enabling/disabling alarm reporting from this CPE UNI.
1.3.6.1.4.1.5504.5.16.1.15.1.4ZhoneEnabledFlagread-createcurrent
zhoneCpeRfSubscriberAlarmSeverity
OBJECT-TYPE
This field is for specifying the severity level of all the alarms from this CPE UNI.
1.3.6.1.4.1.5504.5.16.1.15.1.5ZhoneAlarmSeverityread-createcurrent
zhoneCpeTrafficManagement
OBJECT-IDENTITY
Cpe Traffic Management objects.
1.3.6.1.4.1.5504.5.16.1.16current
zhoneCpeTrafficManagementIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeTrafficManagementIndex when creating entries in the zhoneCpeTrafficManagementTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeTrafficManagementIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.16.1Integer32read-onlycurrent
zhoneCpeTrafficManagementTable
OBJECT-TYPE
Cpe Traffic Management table.
1.3.6.1.4.1.5504.5.16.1.16.2not-accessiblecurrent
zhoneCpeTrafficManagementEntry
OBJECT-TYPE
Row in the Cpe Traffic Management table.
1.3.6.1.4.1.5504.5.16.1.16.2.1not-accessiblecurrent
zhoneCpeTrafficManagementIndex
OBJECT-TYPE
This represents the CPE Traffic Management Index, values are from the range 1 to n.
1.3.6.1.4.1.5504.5.16.1.16.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeTrafficManagementRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.16.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeTrafficManagementProfileName
OBJECT-TYPE
CPE Traffic Management profile for the dynamic bridging. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.16.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeTrafficManagementUpstreamSIR
OBJECT-TYPE
This attribute specifies the upstream sustained information rate. Unit is kbps.
1.3.6.1.4.1.5504.5.16.1.16.2.1.4Unsigned32 (0..1310720)read-createcurrent
zhoneCpeTrafficManagementUpstreamPIR
OBJECT-TYPE
This attribute specifies the upstream peak information rate. Unit is kbps.
1.3.6.1.4.1.5504.5.16.1.16.2.1.5Unsigned32 (0..1310720)read-createcurrent
zhoneCpeTrafficManagementUpstreamPriority
OBJECT-TYPE
Upstream Priority, currently the only used value range is 0-7.
1.3.6.1.4.1.5504.5.16.1.16.2.1.6Unsigned32 (0..65535)read-createcurrent
zhoneCpeTrafficManagementUpstreamWeight
OBJECT-TYPE
Upstream Weight for weighted round robin scheduling, variable size is 1 byte, default 0.
1.3.6.1.4.1.5504.5.16.1.16.2.1.7Unsigned32 (0..255)read-createcurrent
zhoneCpeTrafficManagementDownstreamSIR
OBJECT-TYPE
This attribute specifies the downstream sustained information rate. Unit is kbps.
1.3.6.1.4.1.5504.5.16.1.16.2.1.8Unsigned32 (0..1310720)read-createcurrent
zhoneCpeTrafficManagementDownstreamPIR
OBJECT-TYPE
This attribute specifies the downstream peak information rate. Unit is kbps.
1.3.6.1.4.1.5504.5.16.1.16.2.1.9Unsigned32 (0..1310720)read-createcurrent
zhoneCpeTrafficManagementDownstreamPriority
OBJECT-TYPE
Downstream Priority, currently the only used value range is 0-7.
1.3.6.1.4.1.5504.5.16.1.16.2.1.10Unsigned32 (0..65535)read-createcurrent
zhoneCpeTrafficManagementDownstreamWeight
OBJECT-TYPE
Downstream Weight for weighted round robin scheduling, variable size is 1 byte, default 0.
1.3.6.1.4.1.5504.5.16.1.16.2.1.11Unsigned32 (0..255)read-createcurrent
zhoneCpeTrafficManagementPeakBurstSize
OBJECT-TYPE
Peak burst/block size, in bytes. Default value 0 means use CPE system default.
1.3.6.1.4.1.5504.5.16.1.16.2.1.12Unsigned32 (0..512000)read-writecurrent
zhoneCpeSystemTable
OBJECT-TYPE
Cpe System table.
1.3.6.1.4.1.5504.5.16.1.17not-accessiblecurrent
zhoneCpeSystemEntry
OBJECT-TYPE
Row in the Cpe System table.
1.3.6.1.4.1.5504.5.16.1.17.1not-accessiblecurrent
zhoneCpeSystemRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.17.1.1ZhoneRowStatusread-createcurrent
zhoneCpeSystemCommonProfileIndex
OBJECT-TYPE
This object points to the associated System Common profile.
1.3.6.1.4.1.5504.5.16.1.17.1.2Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeSystemMgcpClientName
OBJECT-TYPE
User string used in accessing the call agent. This is a unique value. This is not a mandatory field, users can leave it empty as well.
1.3.6.1.4.1.5504.5.16.1.17.1.3OCTET STRING (SIZE(1..64))read-createcurrent
zhoneCpeSystemCommon
OBJECT-IDENTITY
Cpe System Common objects.
1.3.6.1.4.1.5504.5.16.1.18current
zhoneCpeSystemCommonIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeSystemCommonIndex when creating entries in the zhoneCpeSystemCommonTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeSystemCommonIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.18.1Unsigned32read-onlycurrent
zhoneCpeSystemCommonTable
OBJECT-TYPE
Cpe System Common table.
1.3.6.1.4.1.5504.5.16.1.18.2not-accessiblecurrent
zhoneCpeSystemCommonEntry
OBJECT-TYPE
Row in the Cpe System Common table.
1.3.6.1.4.1.5504.5.16.1.18.2.1not-accessiblecurrent
zhoneCpeSystemCommonIndex
OBJECT-TYPE
This represents the CPE System Common index value.
1.3.6.1.4.1.5504.5.16.1.18.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeSystemCommonRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.18.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeSystemCommonProfileName
OBJECT-TYPE
CPE System Common profile. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.18.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeSystemCommonFirewall
OBJECT-TYPE
Enable/disable firewall. Enabling firewall can protect the CPE from unwanted instruction. When firewall is enabled, incoming connections can be selectively allowed through firewall access and port forwarding settings.
1.3.6.1.4.1.5504.5.16.1.18.2.1.4ZhoneEnabledFlagread-createcurrent
zhoneCpeSystemCommonSyncCookieProtection
OBJECT-TYPE
Protects against malicious attackers attempting to exploit TCP handshaking.
1.3.6.1.4.1.5504.5.16.1.18.2.1.5ZhoneEnabledFlagread-createcurrent
zhoneCpeSystemCommonCrossVlanRouting
OBJECT-TYPE
If enabled is selected, routing between VLANs is allowed. Enabled Route table lookups ignore the VLAN ID of the ingress and egress ports. If there is a match, the packet is routed out the interface specified in the Route table, regardless of which VLAN it is a member of. Cross VLAN Routing enabled is the default behavior. Disabled Packets will be forwarded to the configured Default Route for the VLAN that they arrived on, unless there is a Route Table match within that same VLAN. Routing of packets across VLANs is prevented, providing traffic isolation.
1.3.6.1.4.1.5504.5.16.1.18.2.1.6ZhoneEnabledFlagread-createcurrent
zhoneCpeStaticRouteListProfileIndex
OBJECT-TYPE
Address of the static-route-list profile associated with this CPE.
1.3.6.1.4.1.5504.5.16.1.18.2.1.7Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeDnsHostListProfile
OBJECT-TYPE
Index of the dns-host profile associated with this entry, or 0 if none.
1.3.6.1.4.1.5504.5.16.1.18.2.1.8Unsigned32read-createcurrent
zhoneCpeSystemCommonTr69Inform
OBJECT-TYPE
Enable or Disable the generation of Inform messages to the ACS (Auto Configuration Server).
1.3.6.1.4.1.5504.5.16.1.18.2.1.9ZhoneEnabledFlagread-createcurrent
zhoneCpeSystemCommonInformInterval
OBJECT-TYPE
Periodic interval (in seconds) at which Inform messages will be generated.
1.3.6.1.4.1.5504.5.16.1.18.2.1.10Unsigned32read-createcurrent
zhoneCpeSystemCommonAcsUrl
OBJECT-TYPE
URL for the CPE to connect to the ACS
1.3.6.1.4.1.5504.5.16.1.18.2.1.11OCTET STRING (SIZE(0..256))read-createcurrent
zhoneCpeSystemCommonAcsUsername
OBJECT-TYPE
User name required for access to the ACS
1.3.6.1.4.1.5504.5.16.1.18.2.1.12OCTET STRING (SIZE(0..64))read-createcurrent
zhoneCpeSystemCommonAcsPassword
OBJECT-TYPE
User password required for access to the ACS.
1.3.6.1.4.1.5504.5.16.1.18.2.1.13OCTET STRING (SIZE(0..64))read-createcurrent
zhoneCpeSystemCommonAdminPassword
OBJECT-TYPE
Log-in password for user account admin.
1.3.6.1.4.1.5504.5.16.1.18.2.1.14OCTET STRING (SIZE(0..16))read-createcurrent
zhoneCpeSystemCommonSupportPassword
OBJECT-TYPE
Log-in password for user account support.
1.3.6.1.4.1.5504.5.16.1.18.2.1.15OCTET STRING (SIZE(0..16))read-createcurrent
zhoneCpeSystemCommonUserPassword
OBJECT-TYPE
Log-in password for user account.
1.3.6.1.4.1.5504.5.16.1.18.2.1.16OCTET STRING (SIZE(0..16))read-createcurrent
zhoneCpeSystemCommonPowerSupply
OBJECT-TYPE
The total watts the power supply plugged into the device can provide. Default value 0 means not specified.
1.3.6.1.4.1.5504.5.16.1.18.2.1.17Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeSystemCommonPowerShutdownDelay
OBJECT-TYPE
Power shedding control. Shutdown delay in minutes. When the unit detects that it is running on battery power, it has the option to shut down all support but the voice over IP telephone service. Default value 0 means not specified.
1.3.6.1.4.1.5504.5.16.1.18.2.1.18Unsigned32 (0..60)read-createcurrent
zhoneCpeSystemCommonPowerRestoreDelay
OBJECT-TYPE
Power shedding control. Restore delay in minutes. When the unit detects that it is running on battery power, it has the option to shut down all support but the voice over IP telephone service. Default value 0 means not specified.
1.3.6.1.4.1.5504.5.16.1.18.2.1.19Unsigned32 (0..10)read-createcurrent
zhoneCpeInterfaceVlanTable
OBJECT-TYPE
Cpe Interface Vlan table.
1.3.6.1.4.1.5504.5.16.1.19not-accessiblecurrent
zhoneCpeInterfaceVlanEntry
OBJECT-TYPE
Row in the Cpe Interface Vlan table.
1.3.6.1.4.1.5504.5.16.1.19.1not-accessiblecurrent
zhoneCpeInterfaceVlanRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.19.1.1ZhoneRowStatusread-createcurrent
zhoneCpeInterfaceVlanRgMode
OBJECT-TYPE
Specifies the VLAN connection type of the interface.
1.3.6.1.4.1.5504.5.16.1.19.1.2INTEGER {routed(1), brouted(2), routedpppoe(3), bridgedpppoe(4), bridged(5)}read-createcurrent
zhoneCpeInterfaceVlanTranslateVlanId
OBJECT-TYPE
The Virtual LAN Id for VLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.19.1.3Unsigned32 (0..4096)read-createcurrent
zhoneCpeInterfaceVlanTranslateVlanCos
OBJECT-TYPE
The Class-Of-Service (COS) value used for VLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.19.1.4Unsigned32 (0..8)read-createcurrent
zhoneCpeInterfaceVlanTranslateSlanId
OBJECT-TYPE
The Secure LAN Id for SLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.19.1.5Unsigned32 (0..4096)read-createcurrent
zhoneCpeInterfaceVlanTranslateSlanCos
OBJECT-TYPE
The Class-Of-Service (COS) value used for SLAN Tag Insertion.
1.3.6.1.4.1.5504.5.16.1.19.1.6Unsigned32 (0..8)read-createcurrent
zhoneCpeInterfaceVlanTranslateSlanTpId
OBJECT-TYPE
The value of the tag protocol identifier that is being used for QinQ packets. (0x8100 is default). Valid values are: 1. 33024 ( 0x8100 ) 2. 34984 ( 0x88A8 ) 3. 37120 ( 0x9100 ) 4. 37376 ( 0x9200 )
1.3.6.1.4.1.5504.5.16.1.19.1.7Unsigned32 (33024 | 34984 | 37120 | 37376)read-createcurrent
zhoneCpeInterfaceVlanIpAddress
OBJECT-TYPE
The address used for IP host services. Default is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.19.1.8IpAddressread-createcurrent
zhoneCpeIpServerProfile
OBJECT-TYPE
The address of the cpe-ip-server profile associated with this host IP address. The value 0 indicates no associated cpe-ip-server profile.
1.3.6.1.4.1.5504.5.16.1.19.1.9Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeDhcpServerProfileIndex
OBJECT-TYPE
The address of the DHCP server profile associated with this interface. The value 0 indicates no associated cpe-dhcp-server profile.
1.3.6.1.4.1.5504.5.16.1.19.1.10Unsigned32 (0..2147483647)read-createcurrent
zhoneCpePortFwdListProfileIndex
OBJECT-TYPE
The address of the port fwd list profile associated with this interface. It is only supported on a WAN interface. The value 0 indicates no associated cpe-port-fwding profile.
1.3.6.1.4.1.5504.5.16.1.19.1.11Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeDhcpServer
OBJECT-IDENTITY
Cpe Dhcp Server objects.
1.3.6.1.4.1.5504.5.16.1.20current
zhoneCpeDhcpServerIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeDhcpServerIndex when creating entries in the zhoneCpeDhcpServerTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeDhcpServerIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.20.1Integer32read-onlycurrent
zhoneCpeDhcpServerTable
OBJECT-TYPE
Cpe Dhcp Server table.
1.3.6.1.4.1.5504.5.16.1.20.2not-accessiblecurrent
zhoneCpeDhcpServerEntry
OBJECT-TYPE
Row in the Cpe Dhcp Server table.
1.3.6.1.4.1.5504.5.16.1.20.2.1not-accessiblecurrent
zhoneCpeDhcpServerIndex
OBJECT-TYPE
This represents the CPE DHCP server index value.
1.3.6.1.4.1.5504.5.16.1.20.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeDhcpServerRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.20.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeDhcpServerProfileName
OBJECT-TYPE
CPE DHCP Server profile. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.20.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeDhcpServerStartAddress
OBJECT-TYPE
First address in the pool to be assigned by the DHCP server. Default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.20.2.1.4IpAddressread-createcurrent
zhoneCpeDhcpServerEndAddress
OBJECT-TYPE
Last address in the pool to be assigned by the DHCP server. Default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.20.2.1.5IpAddressread-createcurrent
zhoneCpeDhcpServerLeaseTime
OBJECT-TYPE
Lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease.
1.3.6.1.4.1.5504.5.16.1.20.2.1.6Integer32 (-1..2147483647)read-createcurrent
zhoneCpeDhcpServerConditionalServerListProfile
OBJECT-TYPE
Index of the dhcp-conditional-server-list profile associated with this entry, or 0 if none.
1.3.6.1.4.1.5504.5.16.1.20.2.1.7Unsigned32read-createcurrent
zhoneCpePppoeTable
OBJECT-TYPE
Cpe PPPOE table.
1.3.6.1.4.1.5504.5.16.1.21not-accessiblecurrent
zhoneCpePppoeEntry
OBJECT-TYPE
Row in the Cpe PPPOE table.
1.3.6.1.4.1.5504.5.16.1.21.1not-accessiblecurrent
zhoneCpePppoeRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.21.1.1ZhoneRowStatusread-createcurrent
zhoneCpePppoeUsername
OBJECT-TYPE
The login user name to be used for PPP authentication.
1.3.6.1.4.1.5504.5.16.1.21.1.2OCTET STRING (SIZE(1..64))read-createcurrent
zhoneCpePppoePassword
OBJECT-TYPE
The login password to be used for PPP authentication.
1.3.6.1.4.1.5504.5.16.1.21.1.3OCTET STRING (SIZE(1..25))read-createcurrent
zhoneCpePppoeAuthentication
OBJECT-TYPE
The PPP authentication protocol to be used for PPP authentication.
1.3.6.1.4.1.5504.5.16.1.21.1.4INTEGER {auto(1), pap(2), chap(3), mschap(4)}read-createcurrent
zhoneCpePppoeRetryInterval
OBJECT-TYPE
Time in seconds before retrying connection.
1.3.6.1.4.1.5504.5.16.1.21.1.5Unsigned32 (1..2147483647)read-createcurrent
zhoneCpeWlanSubscriberTable
OBJECT-TYPE
Cpe Wlan Subscriber table.
1.3.6.1.4.1.5504.5.16.1.22not-accessiblecurrent
zhoneCpeWlanSubscriberEntry
OBJECT-TYPE
Row in the Cpe Wlan Subscriber table.
1.3.6.1.4.1.5504.5.16.1.22.1not-accessiblecurrent
zhoneCpeWlanSubscriberIndex
OBJECT-TYPE
This represents the CPE WLAN subscriber index value.
1.3.6.1.4.1.5504.5.16.1.22.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeWlanSubscriberRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.22.1.2ZhoneRowStatusread-createcurrent
zhoneCpeWlanSubscriberAdminState
OBJECT-TYPE
This attribute activates or deactivates the functions performed by the wireless LAN interface for this subscriber or put the interface in test mode. Values are Up, Down, Test.
1.3.6.1.4.1.5504.5.16.1.22.1.3ZhoneAdminStateread-createcurrent
zhoneCpeWlanSubscriberSsid
OBJECT-TYPE
The SSID assigned to the wireless LAN interface.
1.3.6.1.4.1.5504.5.16.1.22.1.4OCTET STRING (SIZE(1..32))read-createcurrent
zhoneCpeWlanSubscriberEncryptKey
OBJECT-TYPE
WEP 64-bit encryption key: 5 ASCII characters or 10 hexadecimal digits WEP 128-bit encryption key: 13 ASCII charactess or 26 hexadecimal digits WPA Passphrase: 64 characters.
1.3.6.1.4.1.5504.5.16.1.22.1.5OCTET STRING (SIZE(1..64))read-createcurrent
zhoneCpeWlanSubscriberDevicePin
OBJECT-TYPE
Device pin is only applicable when WPS security method is enabled.
1.3.6.1.4.1.5504.5.16.1.22.1.6OCTET STRING (SIZE(1..8))read-createcurrent
zhoneCpeWlanSubscriberRadiusKey
OBJECT-TYPE
Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks.
1.3.6.1.4.1.5504.5.16.1.22.1.7OCTET STRING (SIZE(1..13))read-createcurrent
zhoneCpeWlanProfileIndex
OBJECT-TYPE
The address of cpe-wlan profile associated with this CPE.
1.3.6.1.4.1.5504.5.16.1.22.1.8Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeAccessControlListProfileIndex
OBJECT-TYPE
The address of cpe-access-ctrl-list profile associated with this CPE.
1.3.6.1.4.1.5504.5.16.1.22.1.9Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeWdsMacListProfileIndex
OBJECT-TYPE
The address of cpe-wds-mac-ctrl-list profile associated with this CPE.
1.3.6.1.4.1.5504.5.16.1.22.1.10Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeWlanAdvProfileIndex
OBJECT-TYPE
The address of cpe-wlan-advanced profile associated with this CPE.
1.3.6.1.4.1.5504.5.16.1.22.1.11Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeWlan
OBJECT-IDENTITY
Cpe Wlan objects.
1.3.6.1.4.1.5504.5.16.1.23current
zhoneCpeWlanIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeWlanIndex when creating entries in the zhoneCpeWlanTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeWlanIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.23.1Integer32read-onlycurrent
zhoneCpeWlanTable
OBJECT-TYPE
Cpe Wlan table.
1.3.6.1.4.1.5504.5.16.1.23.2not-accessiblecurrent
zhoneCpeWlanEntry
OBJECT-TYPE
Row in the Cpe Wlan table.
1.3.6.1.4.1.5504.5.16.1.23.2.1not-accessiblecurrent
zhoneCpeWlanIndex
OBJECT-TYPE
This represents the CPE WLAN index value.
1.3.6.1.4.1.5504.5.16.1.23.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeWlanRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.23.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeWlanProfileName
OBJECT-TYPE
This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.23.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeWlanHideAccessPoint
OBJECT-TYPE
Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate.
1.3.6.1.4.1.5504.5.16.1.23.2.1.4ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanIsolateClients
OBJECT-TYPE
Isolate clients within the wireless network from communicating directly with each other.
1.3.6.1.4.1.5504.5.16.1.23.2.1.5ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanWmmAdvertise
OBJECT-TYPE
WMM (Wireless Multi Media) provides a subset of the IEEE 802.11e QoS standard, which adds prioritization to wireless to optimize their performance. When multiple concurrent applications are on the wireless network each application may have different latency and throughput needs. WMM provides for this optimization, however WMM may provide slower.
1.3.6.1.4.1.5504.5.16.1.23.2.1.6ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanMcastFwd
OBJECT-TYPE
Wireless Multicast Forwarding enables the ability to send wireless packets to be intercepted by all nodes in the transmission range of the sender.
1.3.6.1.4.1.5504.5.16.1.23.2.1.7ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanMaxClients
OBJECT-TYPE
The maximum number of wireless client devices that may be simultaneously connected to the wireless network.
1.3.6.1.4.1.5504.5.16.1.23.2.1.8Unsigned32 (1..50)read-createcurrent
zhoneCpeWlanNetAuthentication
OBJECT-TYPE
Configure the network authentication method.
1.3.6.1.4.1.5504.5.16.1.23.2.1.9INTEGER {open(1), shared(2), dot1x(3), wpa(4), wpapsk(5), wpa2(6), wpa2psk(7), mixedwpa2wpa(8), mixedwpa2wpapsk(9)}read-createcurrent
zhoneCpeWlanWpaGroupRekeyInterval
OBJECT-TYPE
Wpa Group Rekey Interval.
1.3.6.1.4.1.5504.5.16.1.23.2.1.10Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeWlanWpaEncryption
OBJECT-TYPE
WPA encryption mode.
1.3.6.1.4.1.5504.5.16.1.23.2.1.11INTEGER {aes(1), tkipaes(2)}read-createcurrent
zhoneCpeWlanWepEncryption
OBJECT-TYPE
WEP encryption mode.
1.3.6.1.4.1.5504.5.16.1.23.2.1.12ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanWepStrength
OBJECT-TYPE
WEP encryption strength.
1.3.6.1.4.1.5504.5.16.1.23.2.1.13INTEGER {bit64(1), bit128(2)}read-createcurrent
zhoneCpeWlanRadiusServerIp
OBJECT-TYPE
IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication. Default is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.23.2.1.14IpAddressread-createcurrent
zhoneCpeWlanRadiusPort
OBJECT-TYPE
UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS).
1.3.6.1.4.1.5504.5.16.1.23.2.1.15Unsigned32 (0..99999)read-createcurrent
zhoneCpeWlanWpa2PreAuthentication
OBJECT-TYPE
Enable or disable WPA2 pre-authentication.
1.3.6.1.4.1.5504.5.16.1.23.2.1.16ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanNetReAuthenticationInterval
OBJECT-TYPE
Configure the WPA2 network re-authentication time, in seconds.
1.3.6.1.4.1.5504.5.16.1.23.2.1.17Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeStaticRouteList
OBJECT-IDENTITY
Cpe Static Route List objects.
1.3.6.1.4.1.5504.5.16.1.24current
zhoneCpeStaticRouteListIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeStaticRouteListIndex when creating entries in the zhoneCpeStaticRouteListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeStaticRouteListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.24.1Integer32read-onlycurrent
zhoneCpeStaticRouteListTable
OBJECT-TYPE
Cpe Static Route List table.
1.3.6.1.4.1.5504.5.16.1.24.2not-accessiblecurrent
zhoneCpeStaticRouteListEntry
OBJECT-TYPE
Row in the Cpe Static Route List table.
1.3.6.1.4.1.5504.5.16.1.24.2.1not-accessiblecurrent
zhoneCpeStaticRouteListIndex
OBJECT-TYPE
This represents the CPE Static Route List index value.
1.3.6.1.4.1.5504.5.16.1.24.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeStaticRouteListRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.24.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeStaticRouteListProfileName
OBJECT-TYPE
CPE Static Route List profile. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.24.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeStaticRoute
OBJECT-IDENTITY
Cpe Static Route Entry objects.
1.3.6.1.4.1.5504.5.16.1.25current
zhoneCpeStaticRouteIndexTable
OBJECT-TYPE
Table of next available index values for CPE static route entry profile.
1.3.6.1.4.1.5504.5.16.1.25.1not-accessiblecurrent
zhoneCpeStaticRouteIndexEntry
OBJECT-TYPE
Row in the zhoneCpeStaticRouteEntryIndexTable.
1.3.6.1.4.1.5504.5.16.1.25.1.1not-accessiblecurrent
zhoneCpeStaticRouteEntryIndexNext
OBJECT-TYPE
This represents the next available index value for the cpe static route entry profile.
1.3.6.1.4.1.5504.5.16.1.25.1.1.1Unsigned32read-onlycurrent
zhoneCpeStaticRouteTable
OBJECT-TYPE
Cpe Static Route Entry table.
1.3.6.1.4.1.5504.5.16.1.25.2not-accessiblecurrent
zhoneCpeStaticRouteEntry
OBJECT-TYPE
Row in the Cpe Static Route Entry table.
1.3.6.1.4.1.5504.5.16.1.25.2.1not-accessiblecurrent
zhoneCpeStaticRouteEntryIndex
OBJECT-TYPE
This represents the CPE Static Route Entry Entry Index.
1.3.6.1.4.1.5504.5.16.1.25.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeStaticRouteRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.25.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeStaticRouteDestinationIp
OBJECT-TYPE
The IP address of the destination network or host. Default is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.25.2.1.3IpAddressread-createcurrent
zhoneCpeStaticRouteNetmask
OBJECT-TYPE
Destination subnet mask. A value of 0.0.0.0 indicates no destination subnet mask is specified. Default is 255.255.255.0.
1.3.6.1.4.1.5504.5.16.1.25.2.1.4IpAddressread-createcurrent
zhoneCpeStaticRouteGateway
OBJECT-TYPE
Next hop IpAddress. Default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.25.2.1.5IpAddressread-createcurrent
zhoneCpeStaticRouteMetric
OBJECT-TYPE
Number of hops to reach the destination. A value of 0 indicates this metric is not used.
1.3.6.1.4.1.5504.5.16.1.25.2.1.6Integer32 (0..2147483647)read-createcurrent
zhoneCpePortFwdList
OBJECT-IDENTITY
Cpe Port Fwd List objects.
1.3.6.1.4.1.5504.5.16.1.26current
zhoneCpePortFwdListIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpePortFwdListIndex when creating entries in the zhoneCpePortFwdListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpePortFwdListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.26.1Integer32read-onlycurrent
zhoneCpePortFwdListTable
OBJECT-TYPE
Cpe Port Fwd List table.
1.3.6.1.4.1.5504.5.16.1.26.2not-accessiblecurrent
zhoneCpePortFwdListEntry
OBJECT-TYPE
Row in the Cpe Port Fwd List table.
1.3.6.1.4.1.5504.5.16.1.26.2.1not-accessiblecurrent
zhoneCpePortFwdListIndex
OBJECT-TYPE
This represents the CPE Port Fwd List index value.
1.3.6.1.4.1.5504.5.16.1.26.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpePortFwdListRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.26.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpePortFwdListProfileName
OBJECT-TYPE
CPE Port Fwd List profile. This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.26.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpePortFwd
OBJECT-IDENTITY
Cpe Port Fwd Entry objects.
1.3.6.1.4.1.5504.5.16.1.27current
zhoneCpePortFwdIndexTable
OBJECT-TYPE
Table of next available index values for CPE port fwd entry profile.
1.3.6.1.4.1.5504.5.16.1.27.1not-accessiblecurrent
zhoneCpePortFwdIndexEntry
OBJECT-TYPE
Row in the zhoneCpePortFwdEntryIndexTable.
1.3.6.1.4.1.5504.5.16.1.27.1.1not-accessiblecurrent
zhoneCpePortFwdEntryIndexNext
OBJECT-TYPE
This represents the next available index value for the cpe port fwd entry profile.
1.3.6.1.4.1.5504.5.16.1.27.1.1.1Unsigned32read-onlycurrent
zhoneCpePortFwdTable
OBJECT-TYPE
Description.
1.3.6.1.4.1.5504.5.16.1.27.2not-accessiblecurrent
zhoneCpePortFwdEntry
OBJECT-TYPE
Description.
1.3.6.1.4.1.5504.5.16.1.27.2.1not-accessiblecurrent
zhoneCpePortFwdEntryIndex
OBJECT-TYPE
This represents the CPE Port Fwd Entry Entry Index.
1.3.6.1.4.1.5504.5.16.1.27.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpePortFwdRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.27.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpePortFwdType
OBJECT-TYPE
portRange - Range indicates that any traffic on those ports will be sent to the private IP address. portRemap - Remap indicates that any traffic on those ports will be sent to the private IP address at the private port. dmz - When DMZ is chosen it is the only rule allowed on that interface. A DMZ rule is effectively the same as a rule with all ports included. Range rules are more secure than setting a DMZ rule, because Range rules allow ports or groups of ports to be opened up.
1.3.6.1.4.1.5504.5.16.1.27.2.1.3INTEGER {dmz(1), portrange(2), portremap(3)}read-createcurrent
zhoneCpePortFwdPortStart
OBJECT-TYPE
Lowest value port number for the range.
1.3.6.1.4.1.5504.5.16.1.27.2.1.4Unsigned32 (0..65535)read-createcurrent
zhoneCpePortFwdPortEnd
OBJECT-TYPE
Highest value port number for the range. This can be equal to port-start if there is only one port.
1.3.6.1.4.1.5504.5.16.1.27.2.1.5Unsigned32 (0..65535)read-createcurrent
zhoneCpePortFwdProtocol
OBJECT-TYPE
Indicate which protocols to monitor for the port numbers.
1.3.6.1.4.1.5504.5.16.1.27.2.1.6INTEGER {none(1), tcp(2), udp(3), tcpudp(4), icmp(5), icmpv4(6)}read-createcurrent
zhoneCpePortFwdPrivatePort
OBJECT-TYPE
The port number with which to send the traffic.
1.3.6.1.4.1.5504.5.16.1.27.2.1.7Unsigned32 (0..65535)read-createcurrent
zhoneCpePortFwdPrivateIp
OBJECT-TYPE
The port IP Address with which to send the traffic. The default value is 0.0.0.0.
1.3.6.1.4.1.5504.5.16.1.27.2.1.8IpAddressread-createcurrent
zhoneCpeServiceApplication
OBJECT-IDENTITY
CPE Service Application for CPEs.
1.3.6.1.4.1.5504.5.16.1.28current
zhoneCpeServiceApplicationTable
OBJECT-TYPE
Cpe Service Application table for CPEs.
1.3.6.1.4.1.5504.5.16.1.28.1not-accessiblecurrent
zhoneCpeServiceApplicationEntry
OBJECT-TYPE
Row in the CpeServiceApplication table.
1.3.6.1.4.1.5504.5.16.1.28.1.1not-accessiblecurrent
zhoneCpeServiceApplicationTemplateType
OBJECT-TYPE
This represents the Template type associated with the service. For example, VOIP, Data, Video, PWE etc.
1.3.6.1.4.1.5504.5.16.1.28.1.1.1ZhoneCpeTemplateTypeaccessible-for-notifycurrent
zhoneCpeServiceApplicationTemplateId
OBJECT-TYPE
This represents the Template id of the cpe service application. Template ID is maitntained by the device manager. Template ID is asigned based on the service application configured on the CPE.
1.3.6.1.4.1.5504.5.16.1.28.1.1.2Unsigned32 (1..2147483647)accessible-for-notifycurrent
zhoneCpeServiceApplicationVirtualConnection
OBJECT-TYPE
This represents the Virtual connection of the cpe service application. For example, in case of GPON CPE, GEM port is the virtual connection.
1.3.6.1.4.1.5504.5.16.1.28.1.1.3Unsigned32 (1..2147483647)accessible-for-notifycurrent
zhoneCpeServiceApplicationTpType
OBJECT-TYPE
This represents the Transport point (TP) in the CPE. For example, ethernet, pots etc.
1.3.6.1.4.1.5504.5.16.1.28.1.1.4TpTypeaccessible-for-notifycurrent
zhoneCpeServiceApplicationTpIndex
OBJECT-TYPE
This represents the Transport point (TP) Number associated with the transport point type.
1.3.6.1.4.1.5504.5.16.1.28.1.1.5Unsigned32 (1..2147483647)accessible-for-notifycurrent
zhoneCpeServiceApplicationRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.28.1.1.6ZhoneRowStatusread-createcurrent
zhoneCpeServiceApplicationVlan
OBJECT-TYPE
This field consists of vlan-cos (high-order 2 bytes) and vlan-id (low-order 2 bytes).
1.3.6.1.4.1.5504.5.16.1.28.1.1.7Unsigned32accessible-for-notifycurrent
zhoneCpeServiceApplicationSlan
OBJECT-TYPE
This field consists of vlan-cos (high-order 2 bytes) and vlan-id (low-order 2 bytes).
1.3.6.1.4.1.5504.5.16.1.28.1.1.8Unsigned32accessible-for-notifycurrent
zhoneCpeDnsHostList
OBJECT-IDENTITY
Dns Host List Objects.
1.3.6.1.4.1.5504.5.16.1.29current
zhoneCpeDnsHostListIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeDnsHostListIndex when creating entries in the zhoneCpeDnsHostListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeDnsHostListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.29.1Integer32read-onlycurrent
zhoneCpeDnsHostListTable
OBJECT-TYPE
The table of DNS host lists.
1.3.6.1.4.1.5504.5.16.1.29.2not-accessiblecurrent
zhoneCpeDnsHostListEntry
OBJECT-TYPE
Row in the zhoneCpeDnsHostList table.
1.3.6.1.4.1.5504.5.16.1.29.2.1not-accessiblecurrent
zhoneCpeDnsHostListIndex
OBJECT-TYPE
Index number for the zhoneCpeDnsHostList table entry.
1.3.6.1.4.1.5504.5.16.1.29.2.1.2Unsigned32not-accessiblecurrent
zhoneCpeDnsHostListRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.29.2.1.3RowStatusread-createcurrent
zhoneCpeDnsHostListProfileName
OBJECT-TYPE
Profile name for this cpe-dns-host profile. This must be unique, and is writable only on creation.
1.3.6.1.4.1.5504.5.16.1.29.2.1.4ZhoneAdminStringread-createcurrent
zhoneCpeDnsHost
OBJECT-IDENTITY
Cpe Dns host objects.
1.3.6.1.4.1.5504.5.16.1.30current
zhoneCpeDnsHostIndexTable
OBJECT-TYPE
Table of next available values for Dns Host Entry index.
1.3.6.1.4.1.5504.5.16.1.30.1not-accessiblecurrent
zhoneCpeDnsHostIndexEntry
OBJECT-TYPE
Row in the zhoneCpeDnsHostIndex table.
1.3.6.1.4.1.5504.5.16.1.30.1.1not-accessiblecurrent
zhoneCpeDnsHostIndexEntryIndexNext
OBJECT-TYPE
Next available entry index for row in zhoneCpeDnsHostTable.
1.3.6.1.4.1.5504.5.16.1.30.1.1.1Integer32read-onlycurrent
zhoneCpeDnsHostTable
OBJECT-TYPE
The table of Cpe Dns Host entries.
1.3.6.1.4.1.5504.5.16.1.30.2not-accessiblecurrent
zhoneCpeDnsHostEntry
OBJECT-TYPE
A row in the Cpe Dns Host table.
1.3.6.1.4.1.5504.5.16.1.30.2.1not-accessiblecurrent
zhoneCpeDnsHostEntryIndex
OBJECT-TYPE
Index for this entry within the CpeDnsHost list.
1.3.6.1.4.1.5504.5.16.1.30.2.1.1Unsigned32not-accessiblecurrent
zhoneCpeDnsHostRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.30.2.1.2RowStatusread-createcurrent
zhoneCpeDnsHostDomainName
OBJECT-TYPE
The domain name assigned to the host IP address.
1.3.6.1.4.1.5504.5.16.1.30.2.1.3OCTET STRING (SIZE(0..256))read-createcurrent
zhoneCpeDnsHostIpAddress
OBJECT-TYPE
Host IP address.
1.3.6.1.4.1.5504.5.16.1.30.2.1.4IpAddressread-createcurrent
zhoneCpeWlanAdvanced
OBJECT-IDENTITY
Cpe Wlan Advanced objects.
1.3.6.1.4.1.5504.5.16.1.31current
zhoneCpeWlanAdvIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeWlanIndex when creating entries in the zhoneCpeWlanTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeWlanIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.31.1Integer32read-onlycurrent
zhoneCpeWlanAdvancedTable
OBJECT-TYPE
Cpe Wlan Advanced table.
1.3.6.1.4.1.5504.5.16.1.31.2not-accessiblecurrent
zhoneCpeWlanAdvancedEntry
OBJECT-TYPE
Row in the Cpe Wlan Advanced table.
1.3.6.1.4.1.5504.5.16.1.31.2.1not-accessiblecurrent
zhoneCpeWlanAdvIndex
OBJECT-TYPE
This represents the CPE WLAN Advanced index value.
1.3.6.1.4.1.5504.5.16.1.31.2.1.1Unsigned32 (1..2147483647)not-accessiblecurrent
zhoneCpeWlanAdvRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.31.2.1.2ZhoneRowStatusread-createcurrent
zhoneCpeWlanAdvProfileName
OBJECT-TYPE
This field is only writable upon creation and must be unique within its table.
1.3.6.1.4.1.5504.5.16.1.31.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeWlanAdvChannel
OBJECT-TYPE
Defines which channel to use, or 'auto' for automatic selection of a channel with low interference. 802.11b and 802.11g use channels to limit interference from other devices.
1.3.6.1.4.1.5504.5.16.1.31.2.1.4INTEGER {auto(1), c1(2), c2(3), c3(4), c4(5), c5(6), c6(7), c7(8), c8(9), c9(10), c10(11), c11(12), c12(13), c13(14)}read-createcurrent
zhoneCpeWlanAdvAutoChanTimer
OBJECT-TYPE
When configured for auto mode, this timer value specifies how often (in minutes) to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices.
1.3.6.1.4.1.5504.5.16.1.31.2.1.5Unsigned32 (0..2147483647)read-createcurrent
zhoneCpeWlanAdvDot11nMode
OBJECT-TYPE
802.11n MIMO EWC modes of operation. 802.11n improves data rates via MIMO (multiple-input, multiple-output) using spatial streams which each have a channel width of 40 MHz or 20 MHz. Usage of 802.11n in the 2.4 and 5GHz modes should depend on interference with other 802.11 or bluetooth systems on the same frequency. Enhanced Wireless Consortium (EWC) provides extra enhancements (adding the ability to define 20 MHz channels).
1.3.6.1.4.1.5504.5.16.1.31.2.1.6INTEGER {auto(1), disabled(2)}read-createcurrent
zhoneCpeWlanAdvDot11nRate
OBJECT-TYPE
Supported 802.11n MIMO rates, in Mbps.
1.3.6.1.4.1.5504.5.16.1.31.2.1.7INTEGER {auto(1), use54g(2), rate6dot5m(3), rate13m(4), rate19dot5m(5), rate26m(6), rate39m(7), rate58dot5m(9), rate65m(10), rate78m(11), rate104m(12), rate117m(13), rate130m(14)}read-createcurrent
zhoneCpeWlanAdvDot1nProtection
OBJECT-TYPE
802.11n MIMO protection modes.
1.3.6.1.4.1.5504.5.16.1.31.2.1.8INTEGER {auto(1), disabled(2)}read-createcurrent
zhoneCpeWlanAdvDot1nClientOnly
OBJECT-TYPE
Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.
1.3.6.1.4.1.5504.5.16.1.31.2.1.9ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanAdvRate54G
OBJECT-TYPE
The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use 54g.
1.3.6.1.4.1.5504.5.16.1.31.2.1.10INTEGER {auto(1), rate1m(2), rate2m(3), rate5dot5m(4), rate6m(5), rate9m(6), rate11m(7), rate12m(8), rate18m(9), rate24m(10), rate36m(11), rate48m(12), rate54m(13)}read-createcurrent
zhoneCpeWlanAdvMcastRate
OBJECT-TYPE
The rate for the multicast traffic.
1.3.6.1.4.1.5504.5.16.1.31.2.1.11INTEGER {auto(1), rate1m(2), rate2m(3), rate5dot5m(4), rate6m(5), rate9m(6), rate11m(7), rate12m(8), rate18m(9), rate24m(10), rate36m(11), rate48m(12), rate54m(13)}read-createcurrent
zhoneCpeWlanAdvBasicRate
OBJECT-TYPE
The rate when the radio is operating in basic 802.11b/g mode.
1.3.6.1.4.1.5504.5.16.1.31.2.1.12INTEGER {default(1), all(2), rate1n2(3), stdrates(4)}read-createcurrent
zhoneCpeWlanAdvFragmentationThreshold
OBJECT-TYPE
The threshold at which the packets are fragmented.
1.3.6.1.4.1.5504.5.16.1.31.2.1.13Unsigned32 (256..2346)read-createcurrent
zhoneCpeWlanAdvRtsThreshold
OBJECT-TYPE
The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network.
1.3.6.1.4.1.5504.5.16.1.31.2.1.14Unsigned32 (0..2347)read-createcurrent
zhoneCpeWlanAdvDtimInterval
OBJECT-TYPE
The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for transmission.
1.3.6.1.4.1.5504.5.16.1.31.2.1.15Unsigned32 (1..255)read-createcurrent
zhoneCpeWlanAdvBeaconInterval
OBJECT-TYPE
The interval at which Beacons are generated.
1.3.6.1.4.1.5504.5.16.1.31.2.1.16Unsigned32 (1..65535)read-createcurrent
zhoneCpeWlanAdvGlobalMaxClients
OBJECT-TYPE
The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all active SSIDs.
1.3.6.1.4.1.5504.5.16.1.31.2.1.17Unsigned32 (1..128)read-createcurrent
zhoneCpeWlanAdvXpressTechnology
OBJECT-TYPE
Enable or disable the XPress(TM) Technology.
1.3.6.1.4.1.5504.5.16.1.31.2.1.18ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanAdvTxPower
OBJECT-TYPE
The percentage of total power that should be used for data transmissions.
1.3.6.1.4.1.5504.5.16.1.31.2.1.19Unsigned32 (1..100)read-createcurrent
zhoneCpeWlanAdvWmm
OBJECT-TYPE
Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.
1.3.6.1.4.1.5504.5.16.1.31.2.1.20ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanAdvWmmNoAck
OBJECT-TYPE
Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data.
1.3.6.1.4.1.5504.5.16.1.31.2.1.21ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanAdvWmmApsd
OBJECT-TYPE
Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.
1.3.6.1.4.1.5504.5.16.1.31.2.1.22ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanAdvApMode
OBJECT-TYPE
Wireless bridge modes of operation.
1.3.6.1.4.1.5504.5.16.1.31.2.1.23INTEGER {accesspoint(1), wirelessbridge(2)}read-createcurrent
zhoneCpeWlanAdvBridgeRestrict
OBJECT-TYPE
Wireless Bridge Restriction Modes of operation.
1.3.6.1.4.1.5504.5.16.1.31.2.1.24INTEGER {enabled(1), enabledscan(2), disabled(3)}read-createcurrent
zhoneCpeWlanAdvWps
OBJECT-TYPE
Enable or disable WiFi Protected Setup (WPS) security method. If WPS is enabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network. It is available for WPA-PSK, WPA2-PSK, Mixed WPA2/WPA-PSK and Open Network Authentication methods.
1.3.6.1.4.1.5504.5.16.1.31.2.1.25ZhoneEnabledFlagread-createcurrent
zhoneCpeWlanAdvWpsAddClientMethod
OBJECT-TYPE
A client can be added via three different methods.
1.3.6.1.4.1.5504.5.16.1.31.2.1.26INTEGER {pushbutton(1), stapin(2), appin(3)}read-createcurrent
zhoneCpeWlanAdvWpsApMode
OBJECT-TYPE
If the provider is using an external registrar for security, select configured. The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Issue Config AP to begin the registration process with the client.
1.3.6.1.4.1.5504.5.16.1.31.2.1.27INTEGER {configured(1), unconfigured(2)}read-createcurrent
zhoneCpeCondDhcpSrvList
OBJECT-IDENTITY
Conditional DHCP server list objects
1.3.6.1.4.1.5504.5.16.1.32current
zhoneCpeCondiDhcpSrvListIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeCondDhcpSrvListIndex when creating entries in the zhoneCpeCondDhcpSrvListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeCondDhcpSrvListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.32.1Integer32read-onlycurrent
zhoneCpeCondDhcpSrvListTable
OBJECT-TYPE
Table in which each entry is a list of conditional dhcp server rules.
1.3.6.1.4.1.5504.5.16.1.32.2not-accessiblecurrent
zhoneCpeCondDhcpSrvListEntry
OBJECT-TYPE
Row in conditional DHCP server list table
1.3.6.1.4.1.5504.5.16.1.32.2.1not-accessiblecurrent
zhoneCpeCondDhcpSrvListIndex
OBJECT-TYPE
Index number for this cpe conditional dhcp server list. This is the number that goes into the cpe-dhcp-server record.
1.3.6.1.4.1.5504.5.16.1.32.2.1.1Unsigned32not-accessiblecurrent
zhoneCpeCondDhcpSrvListRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.32.2.1.2RowStatusread-createcurrent
zhoneCpeCondDhcpSrvListProfileName
OBJECT-TYPE
Profile name for this cpe-cond-dhcp-srv-list profile. This must be unique, and is writable only on creation.
1.3.6.1.4.1.5504.5.16.1.32.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeCondDhcpSrv
OBJECT-IDENTITY
Conditional DHCP server objects
1.3.6.1.4.1.5504.5.16.1.33current
zhoneCpeCondDhcpSrvIndexTable
OBJECT-TYPE
Table of next available indexes for each conditional DHCP server list.
1.3.6.1.4.1.5504.5.16.1.33.1not-accessiblecurrent
zhoneCpeCondDhcpSrvIndexEntry
OBJECT-TYPE
Row in the conditional DHCP server index table.
1.3.6.1.4.1.5504.5.16.1.33.1.1not-accessiblecurrent
zhoneCpeCondDhcpSrvIndexEntryIndexNext
OBJECT-TYPE
Next available index for a conditional DHCP server list.
1.3.6.1.4.1.5504.5.16.1.33.1.1.1Integer32read-onlycurrent
zhoneCpeCondDhcpSrvTable
OBJECT-TYPE
Table of conditional DHCP server data.
1.3.6.1.4.1.5504.5.16.1.33.2not-accessiblecurrent
zhoneCpeCondDhcpSrvEntry
OBJECT-TYPE
Row inf the conditional DHCP server table
1.3.6.1.4.1.5504.5.16.1.33.2.1not-accessiblecurrent
zhoneCpeCondDhcpSrvEntryIndex
OBJECT-TYPE
The entry index within the conditional DHCP server list
1.3.6.1.4.1.5504.5.16.1.33.2.1.1Unsigned32not-accessiblecurrent
zhoneCpeCondDhcpSrvRowStatus
OBJECT-TYPE
The row status for adding and deleting rows.
1.3.6.1.4.1.5504.5.16.1.33.2.1.2RowStatusread-createcurrent
zhoneCpeCondDhcpSrvAdminState
OBJECT-TYPE
Enable/disable this rule. Disabling allows rule to be temporarily unavailable for testing or debug purposes.
1.3.6.1.4.1.5504.5.16.1.33.2.1.3ZhoneEnabledFlagread-createcurrent
zhoneCpeCondDhcpSrvPriorityOrder
OBJECT-TYPE
When multiple Conditional DHCP Rules are applied to the same physical port and an ingress packet matches more than one rule, the rule with the highest Priority will be applied. The default priority is for rules to be applied in the order created.
1.3.6.1.4.1.5504.5.16.1.33.2.1.4Integer32read-createcurrent
zhoneCpeCondDhcpVciOui
OBJECT-TYPE
This field is for Vendor Class Identifier (Option 60) or Organizationally Unique Identifier. Conditional DHCP Rules classify ingress packets based on a matching OUI, or based on a matching DHCP Option 60 string value. OUI is the first 3 bytes of a MAC, separated by colons (e.g. 00:02:71). VCI is the text string included in the Option 60. When an attached device sends a DHCP Discover packet to request a dynamically assigned IP Address, it may include this Option 60 string to identify what type of device it is.
1.3.6.1.4.1.5504.5.16.1.33.2.1.5ZhoneAdminStringread-createcurrent
zhoneCpeCondDhcpSrvVciMatch
OBJECT-TYPE
VCI, the Option 60 String included in the DHCP Discover packet, may be up to 255 characters long, while the vci-oui field supports a maximum of 32 characters. This configuration option specifies where to look in the entire Option 60 string for a match. Choices are at the beginning (Prefix), at the end (Suffix), or anywhere in the string (Substring).
1.3.6.1.4.1.5504.5.16.1.33.2.1.6INTEGER {prefix(1), suffix(2), substring(3)}read-createcurrent
zhoneCpeCondDhcpSrvStartAddr
OBJECT-TYPE
Starting IP Address for the subnet range associated with this rule. Must be in the same subnet as the LAN IP Interface for this VLAN. Every Conditional DHCP Rule should have a unique range of IP Addresses within the LAN Subnet (non-overlapping).
1.3.6.1.4.1.5504.5.16.1.33.2.1.7IpAddressread-createcurrent
zhoneCpeCondDhcpSrvEndAddr
OBJECT-TYPE
Last ip address associated with this rule.
1.3.6.1.4.1.5504.5.16.1.33.2.1.8IpAddressread-createcurrent
zhoneCpeCondDhcpSrvWanVlan
OBJECT-TYPE
VLAN ID of the WAN interface that shall be used as the default forwarding path for all packets received with an IP address in this subnet. This feature enables automatic forwarding of packets sourced by a Conditional DHCP Client device to a different Default Gateway (based on the VLAN ID).
1.3.6.1.4.1.5504.5.16.1.33.2.1.9Unsigned32 (0..4096)read-createcurrent
zhoneCpeCondDhcpSrvPortFwdRule
OBJECT-TYPE
When enabled, a Static Port Forwarding Firewall Rule will automatically be created for each client device assigned an IP Address based on this rule.
1.3.6.1.4.1.5504.5.16.1.33.2.1.10ZhoneEnabledFlagread-createcurrent
zhoneCpeCondDhcpSrvStartPort
OBJECT-TYPE
WAN-side Port Number of the Port Forwarding Rule that will be automatically created for the Conditional DHCP client assigned the Starting IP Address defined for this rule. The WAN-side Port Number will increment by 1 for each new client device.
1.3.6.1.4.1.5504.5.16.1.33.2.1.11Unsigned32 (0..65535)read-createcurrent
zhoneCpeCondDhcpSrvPrivatePort
OBJECT-TYPE
The LAN-side Port Number of the Port Forwarding Rule that will be bound to the private IP Address assigned to each client. This Port Number is typically assigned based on the application that the Port Forwarding Rule will be used for. For example, if the Rule will be used to enable on-demand SSH connections to client devices with conditional IP Addresses, then the Private Port will be 22.
1.3.6.1.4.1.5504.5.16.1.33.2.1.12Unsigned32 (0..65535)read-createcurrent
zhoneCpeCondDhcpSrvProtocol
OBJECT-TYPE
Defines what type of packets will be allowed through the Static Port Forwarding Rule.
1.3.6.1.4.1.5504.5.16.1.33.2.1.13INTEGER {tcp(1), udp(2), both(3)}read-createcurrent
zhoneCpeCondDhcpSrvPriDns
OBJECT-TYPE
Defines the Option 6 Primary DNS IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule.
1.3.6.1.4.1.5504.5.16.1.33.2.1.14IpAddressread-createcurrent
zhoneCpeCondDhcpSrvSecDns
OBJECT-TYPE
Defines the Option 6 Secondary DNS IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule.
1.3.6.1.4.1.5504.5.16.1.33.2.1.15IpAddressread-createcurrent
zhoneCpeCondDhcpSrvPriNpt
OBJECT-TYPE
Defines the Option 42 Primary NTP IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule. NOTE that Option 2 (Timezone Offset) will also be included in the DHCP Offer. The Option 2 value will be automatically populated by the ONT, based on what it was assigned on an uplink interface with DHCP client enabled.
1.3.6.1.4.1.5504.5.16.1.33.2.1.16IpAddressread-createcurrent
zhoneCpeCondDhcpSrvSecNpt
OBJECT-TYPE
Defines the Option 42 Secondary NTP IP Addresses that will be included in the DHCP Offer to Conditional DHCP client devices matching this rule.
1.3.6.1.4.1.5504.5.16.1.33.2.1.17IpAddressread-createcurrent
zhoneCpeCondDhcpSrvVsi
OBJECT-TYPE
Vendor Specific Information (Option 43) is a user-configured text string of up to 32 characters with no restrictions on format or content. Required by some DHCP client devices for specific applications and/or boot up procedures.
1.3.6.1.4.1.5504.5.16.1.33.2.1.18ZhoneAdminStringread-createcurrent
zhoneCpeCondDhcpSrvPermanent
OBJECT-TYPE
When enabled, IP Addresses are permanently bound to the MAC address of the device they are assigned to. DHCP Lease table will show permanent entries for each host.
1.3.6.1.4.1.5504.5.16.1.33.2.1.19ZhoneEnabledFlagread-createcurrent
zhoneCpeCmd
OBJECT-IDENTITY
1.3.6.1.4.1.5504.5.16.1.34
zhoneCpeCmdOperation
OBJECT-TYPE
The Command operation to be performed. The command operation will determine which of the other zhoneCpeCmd objects will be used. The DELETE commands delete configuration. The MOVE commands copy configuration from source to destination. Source configuration is deleted. The CLONE commands copy configuration from source to destination. Source configuration is perserved. Destination configuration befor clone operation is deleted. The APPLY commands copy configuration from source to destination. Source configuration is perserved. Destination configuration prior to appy operation is preserved.
1.3.6.1.4.1.5504.5.16.1.34.1INTEGER {deleteSlot(1), deletePort(2), deleteCpe(3), deleteUni(4), deleteService(5), moveSlotToSlot(10), movePortToPort(11), moveCpeToCpe(12), moveUniToUni(13), moveServiceToService(15), cloneSlotToSlot(20), clonePortToPort(21), cloneCpeToCpe(22), cloneUniToUni(23), cloneServiceToService(24), cloneCpeToSlot(25), cloneCpeToPort(26), applyCpeToSlot(40), applyCpeToPort(41), applyCpeToCpe(42), createVirtualCpe(60), deleteVirtualCpe(61), applySvcToCpe(70), removeSvcFromCpe(80)}read-writecurrent
zhoneCpeCmdSrcIfIndex
OBJECT-TYPE
Command SOURCE ifIndex. Using this object overwrites source shelf/slot/port/subPort objects. This object must be used for virtual CPEs.
1.3.6.1.4.1.5504.5.16.1.34.2Unsigned32read-writecurrent
zhoneCpeCmdSrcShelf
OBJECT-TYPE
Command SOURCE shelf
1.3.6.1.4.1.5504.5.16.1.34.3Unsigned32read-writecurrent
zhoneCpeCmdSrcSlot
OBJECT-TYPE
Command SOURCE slot
1.3.6.1.4.1.5504.5.16.1.34.4Unsigned32read-writecurrent
zhoneCpeCmdSrcPort
OBJECT-TYPE
Command SOURCE port.
1.3.6.1.4.1.5504.5.16.1.34.5Unsigned32read-writecurrent
zhoneCpeCmdSrcSubport
OBJECT-TYPE
Command SOURCE subPort.
1.3.6.1.4.1.5504.5.16.1.34.6Unsigned32read-writecurrent
zhoneCpeCmdSrcTpType
OBJECT-TYPE
Command SOURCE tpType.
1.3.6.1.4.1.5504.5.16.1.34.7TpTyperead-writecurrent
zhoneCpeCmdSrcTpIndex
OBJECT-TYPE
Command SOURCE tpIndex
1.3.6.1.4.1.5504.5.16.1.34.8Unsigned32read-writecurrent
zhoneCpeCmdDstIfIndex
OBJECT-TYPE
Command DESTINATION ifIndex. Using this object overwrites destination shelf/slot/port/subPort objects. This object must be used for virtual CPEs.
1.3.6.1.4.1.5504.5.16.1.34.9Unsigned32read-writecurrent
zhoneCpeCmdDstShelf
OBJECT-TYPE
Command DESTINATION shelf
1.3.6.1.4.1.5504.5.16.1.34.10Unsigned32read-writecurrent
zhoneCpeCmdDstSlot
OBJECT-TYPE
Command DESTINATION slot
1.3.6.1.4.1.5504.5.16.1.34.11Unsigned32read-writecurrent
zhoneCpeCmdDstPort
OBJECT-TYPE
Command DESTINATION port.
1.3.6.1.4.1.5504.5.16.1.34.12Unsigned32read-writecurrent
zhoneCpeCmdDstSubport
OBJECT-TYPE
Command DESTINATION subPort.
1.3.6.1.4.1.5504.5.16.1.34.13Unsigned32read-writecurrent
zhoneCpeCmdDstTpType
OBJECT-TYPE
Command DESTINATION tpType.
1.3.6.1.4.1.5504.5.16.1.34.14TpTyperead-writecurrent
zhoneCpeCmdDstTpIndex
OBJECT-TYPE
Command DESTINATION tpIndex
1.3.6.1.4.1.5504.5.16.1.34.15Unsigned32read-writecurrent
zhoneCpeCmdString
OBJECT-TYPE
General purpose string parameter. Used to specify names or other string values.
1.3.6.1.4.1.5504.5.16.1.34.16ZhoneAdminStringread-writecurrent
zhoneCpeCmdSvcTemplateType
OBJECT-TYPE
Command cpe service template type.
1.3.6.1.4.1.5504.5.16.1.34.17ZhoneCpeTemplateTyperead-writecurrent
zhoneCpeCmdSvcTemplateId
OBJECT-TYPE
Command cpe service template indentification.
1.3.6.1.4.1.5504.5.16.1.34.18Unsigned32read-writecurrent
zhoneCpeCmdSvcTemplateIfIndex
OBJECT-TYPE
Command cpe service template destintation CPE ifIndex.
1.3.6.1.4.1.5504.5.16.1.34.19Unsigned32read-writecurrent
zhoneCpeCmdSvcTemplateVirtualConn
OBJECT-TYPE
Command cpe service template source CPE ifIndex. Also known as the virutal CPE ifIndex.
1.3.6.1.4.1.5504.5.16.1.34.20Unsigned32read-writecurrent
zhoneCpeCmdSvcTemplateTpType
OBJECT-TYPE
Command cpe service tpType. A zero value means all TpTypes on the destination CPE.
1.3.6.1.4.1.5504.5.16.1.34.21TpTyperead-writecurrent
zhoneCpeCmdSvcTemplateTpIndex
OBJECT-TYPE
Command cpe service DESTINATION tpIndex. A zero value means all UNI ports of the destination CPE.
1.3.6.1.4.1.5504.5.16.1.34.22Unsigned32read-writecurrent
zhoneCpeCmdSvcTemplateVlan
OBJECT-TYPE
Command cpe service VLAN, consisting of vlan cos (high order 16 bits) and vlan ID (low order 16 bits).
1.3.6.1.4.1.5504.5.16.1.34.23Unsigned32read-writecurrent
zhoneCpeCmdSvcTemplateSlan
OBJECT-TYPE
Command cpe service SLAN, consisting of slan cos (high order 16 bits) and slan ID (low order 16 bits).
1.3.6.1.4.1.5504.5.16.1.34.24Unsigned32read-writecurrent
zhoneCpeCmdOverrideTpIndex
OBJECT-TYPE
If set, use this as the uni number to which the service on the target CPE is applied.
1.3.6.1.4.1.5504.5.16.1.34.25Unsigned32read-writecurrent
zhoneCpeCmdOverrideVlanId
OBJECT-TYPE
If set, use this vlanId on the destination CPE.
1.3.6.1.4.1.5504.5.16.1.34.26Unsigned32read-writecurrent
zhoneCpeCmdOverrideVlanCos
OBJECT-TYPE
If set, use this value as the vlan cos on the destination CPE.
1.3.6.1.4.1.5504.5.16.1.34.27Unsigned32read-writecurrent
zhoneCpeCmdOverrideSlanId
OBJECT-TYPE
If set, use this slanId on the destination CPE.
1.3.6.1.4.1.5504.5.16.1.34.28Unsigned32read-writecurrent
zhoneCpeCmdOverrideSlanCos
OBJECT-TYPE
If set, use this slan cos on the destination CPE.
1.3.6.1.4.1.5504.5.16.1.34.29Unsigned32read-writecurrent
zhoneCpeLldpMedPolicyList
OBJECT-IDENTITY
Link Layer Discovery Protocol MED network policy list objects
1.3.6.1.4.1.5504.5.16.1.35current
zhoneCpeLldpMedPolicyListIndexNext
OBJECT-TYPE
This object contains an appropriate value to be used for the zhoneCpeLldpMedPolicyListIndex when creating entries in the zhoneCpeLldpMedPolicyListTable. The value 0 indicates that no unassigned entries are available. To obtain the zhoneCpeLldpMedPolicyListIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
1.3.6.1.4.1.5504.5.16.1.35.1Integer32read-onlycurrent
zhoneCpeLldpMedPolicyListTable
OBJECT-TYPE
Table in which each entry is a list of LLDP-MED network policy rules.
1.3.6.1.4.1.5504.5.16.1.35.2not-accessiblecurrent
zhoneCpeLldpMedPolicyListEntry
OBJECT-TYPE
Row in LLDP-MED network policy list table
1.3.6.1.4.1.5504.5.16.1.35.2.1not-accessiblecurrent
zhoneCpeLldpMedPolicyListIndex
OBJECT-TYPE
This represents the CPE LLDP-MED network policy index value.
1.3.6.1.4.1.5504.5.16.1.35.2.1.1Unsigned32not-accessiblecurrent
zhoneCpeLldpMedPolicyListRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.35.2.1.2RowStatusread-createcurrent
zhoneCpeLldpMedPolicyListProfileName
OBJECT-TYPE
Profile name for this cpe-lldp-med-policy-list profile. This must be unique, and is writable only on creation.
1.3.6.1.4.1.5504.5.16.1.35.2.1.3ZhoneAdminStringread-createcurrent
zhoneCpeLldpMedPolicy
OBJECT-IDENTITY
Link Layer Discover Protocol MED network policy objects
1.3.6.1.4.1.5504.5.16.1.36current
zhoneCpeLldpMedPolicyIndexTable
OBJECT-TYPE
Table of next available indexes for each LLDP-MED network policy.
1.3.6.1.4.1.5504.5.16.1.36.1not-accessiblecurrent
zhoneCpeLldpMedPolicyIndexEntry
OBJECT-TYPE
Row in the zhoneCpeLldpMedPolicyIndex table.
1.3.6.1.4.1.5504.5.16.1.36.1.1not-accessiblecurrent
zhoneCpeLldpMedPolicyIndexEntryIndexNext
OBJECT-TYPE
Next available entry index for row in zhoneCpeLldpMedPolicyTable.
1.3.6.1.4.1.5504.5.16.1.36.1.1.1Integer32read-onlycurrent
zhoneCpeLldpMedPolicyTable
OBJECT-TYPE
The table of Cpe Lldp Med Policy entries.
1.3.6.1.4.1.5504.5.16.1.36.2not-accessiblecurrent
zhoneCpeLldpMedPolicyEntry
OBJECT-TYPE
A row in the Cpe Lldp Med Policy table.
1.3.6.1.4.1.5504.5.16.1.36.2.1not-accessiblecurrent
zhoneCpeLldpMedPolicyEntryIndex
OBJECT-TYPE
The entry index within the LLDP-MED network policy list
1.3.6.1.4.1.5504.5.16.1.36.2.1.1Unsigned32not-accessiblecurrent
zhoneCpeLldpMedPolicyRowStatus
OBJECT-TYPE
Used to create, modify or delete an entry in this table.
1.3.6.1.4.1.5504.5.16.1.36.2.1.2RowStatusread-createcurrent
zhoneCpeLldpMedPolicyAdminState
OBJECT-TYPE
Enable/disable the network policy.
1.3.6.1.4.1.5504.5.16.1.36.2.1.3ZhoneEnabledFlagread-createcurrent
zhoneCpeLldpMedPolicyAppType
OBJECT-TYPE
The media type that defines the primary function of the application for the policy advertised by an endpoint.
1.3.6.1.4.1.5504.5.16.1.36.2.1.4INTEGER {voice(1), voicesignal(2), guestvoice(3), guestvoicesignal(4), softphone(5), videoconf(6), videostreaming(7), videosignal(8)}read-createcurrent
zhoneCpeLldpMedPolicyVlanId
OBJECT-TYPE
The VLAN ID of the application for the policy advertised by an endpoint.
1.3.6.1.4.1.5504.5.16.1.36.2.1.5Unsigned32 (0..4096)read-createcurrent
zhoneCpeLldpMedPolicyCos
OBJECT-TYPE
The Class-Of-Service of the application for the policy advertised by an endpoint.
1.3.6.1.4.1.5504.5.16.1.36.2.1.6Unsigned32 (0..8)read-createcurrent
zhoneCpeLldpMedPolicyDscp
OBJECT-TYPE
This parameter indicates DSCP value for cpe lldp med policy traffic. Valid code values: <0-63> Differentiated services codepoint value af11 Mark packets with AF11 dscp (001010) af12 Mark packets with AF12 dscp (001100) af13 Mark packets with AF13 dscp (001110) af21 Mark packets with AF21 dscp (010010) af22 Mark packets with AF22 dscp (010100) af23 Mark packets with AF23 dscp (010110) af31 Mark packets with AF31 dscp (011010) af32 Mark packets with AF32 dscp (011100) af33 Mark packets with AF33 dscp (011110) af41 Mark packets with AF41 dscp (100010) af42 Mark packets with AF42 dscp (100100) af43 Mark packets with AF43 dscp (100110) cs1 Mark packets with CS1(precedence 1) dscp (001000) cs2 Mark packets with CS2(precedence 2) dscp (010000) cs3 Mark packets with CS3(precedence 3) dscp (011000) cs4 Mark packets with CS4(precedence 4) dscp (100000) cs5 Mark packets with CS5(precedence 5) dscp (101000) cs6 Mark packets with CS6(precedence 6) dscp (110000) cs7 Mark packets with CS7(precedence 7) dscp (111000) default Mark packets with default dscp (000000) ef Mark packets with EF dscp (101110)
1.3.6.1.4.1.5504.5.16.1.36.2.1.7OCTET STRING (SIZE(1..8))read-createcurrent
zhoneCpeAutoCfgRule
OBJECT-IDENTITY
Rule for selecting template to apply for CPE auto-configuration.
1.3.6.1.4.1.5504.5.16.1.37current
zhoneCpeAutoCfgRuleIndexNext
OBJECT-TYPE
Next available entry in zhoneCpeAutoCfgRuleTable.
1.3.6.1.4.1.5504.5.16.1.37.1Unsigned32read-onlycurrent
zhoneCpeAutoCfgRuleTable
OBJECT-TYPE
Table of rules for selecting templates to apply in auto-configuration.
1.3.6.1.4.1.5504.5.16.1.37.2not-accessiblecurrent
zhoneCpeAutoCfgRuleEntry
OBJECT-TYPE
Row in the auto-config rule table.
1.3.6.1.4.1.5504.5.16.1.37.2.1not-accessiblecurrent
zhoneCpeAutoCfgRuleIndex
OBJECT-TYPE
This represents the index in the auto-cfg-rule table.
1.3.6.1.4.1.5504.5.16.1.37.2.1.1Unsigned32not-accessiblecurrent
zhoneCpeAutoCfgRuleAdminState
OBJECT-TYPE
If down, this rule will not participate in rule matching.
1.3.6.1.4.1.5504.5.16.1.37.2.1.2ZhoneAdminStateread-createcurrent
zhoneCpeAutoCfgRulePriority
OBJECT-TYPE
1 is the lowest priority. When conflicting rules match, the one with the hightest priority is used.
1.3.6.1.4.1.5504.5.16.1.37.2.1.3Integer32 (1..2147483647)read-createcurrent
zhoneCpeAutoCfgRuleMatchExpression
OBJECT-TYPE
Logical expression telling which CPEs should be configured according to this rule. elements are: keyword followed by value. Multiple elements can be connected with AND. Keywords are: model - specified model ID slot - specifies slot number or numbers olt - specifies GPON OLT number or numbers example: model 2426 AND slot 6 AND olt 1-4,7 In this example, apply to model 2426 discovered on olts 1, 2, 3, 4, or 7 on slot 6.
1.3.6.1.4.1.5504.5.16.1.37.2.1.4OCTET STRING (SIZE(0..256))read-createcurrent
zhoneCpeAutoCfgRuleServiceTemplate
OBJECT-TYPE
The ifIndex of the virtual ONU supplying the service template for this rule.
1.3.6.1.4.1.5504.5.16.1.37.2.1.5InterfaceIndexread-createcurrent
zhoneCpeAutoCfgRuleTargetUni
OBJECT-TYPE
Which unis from the template should be applied by this rule. This consists of a uni type followed by one or more uni numbers, separated by commas, or with ranges indicated by '-'. The word 'all' may be used to indicate all ports of that type. example: eth 1-3 In this example, apply services on the provisioned ethernet port on the service template to ethernet ports 1, 2, and 3 of the matched CPE. If this field is blank, then the entire service template is applied to the CPE.
1.3.6.1.4.1.5504.5.16.1.37.2.1.6OCTET STRING (SIZE(0..32))read-createcurrent
zhoneCpeAutoCfgRuleDeleteBeforeApply
OBJECT-TYPE
If true, any existing services on the target unis are removed prior to applying the service template. If the targetUni field is blank and this field is true, then all services on the CPE are removed before the service template is applied.
1.3.6.1.4.1.5504.5.16.1.37.2.1.7TruthValueread-createcurrent
zhoneCpeAutoCfgRuleRowStatus
OBJECT-TYPE
Use to create, modify, or delete a row in this table.
1.3.6.1.4.1.5504.5.16.1.37.2.1.8ZhoneRowStatusread-createcurrent
zhoneCpeAutoCfgRuleProfileName
OBJECT-TYPE
The profile name of the rule.
1.3.6.1.4.1.5504.5.16.1.37.2.1.9ZhoneAdminStringread-createcurrent
zhoneCpeCfgGlobalSettings
OBJECT-IDENTITY
System-wide settings for CPE config.
1.3.6.1.4.1.5504.5.16.1.38current
zhoneCpeCfgAutoAssign
OBJECT-TYPE
Automatically assign ONU IDs to discovered ONU serial numbers.
1.3.6.1.4.1.5504.5.16.1.38.1ZhoneEnabledFlagread-writecurrent
zhoneCpeCfgAutoConfig
OBJECT-TYPE
When an ONU is auto-assigned, provision that ONU based on the matching auto config rule.
1.3.6.1.4.1.5504.5.16.1.38.2ZhoneEnabledFlagread-writecurrent
zhoneCpeCfgParamsStr
OBJECT-TYPE
Spare field for temporary parameters.
1.3.6.1.4.1.5504.5.16.1.38.3OCTET STRING (SIZE(0..256))read-writecurrent

Conformance

NameOIDStatus
zhoneCpeSipDialPlanGroup
OBJECT-GROUP
Cpe Sip Dial Plan Table objects.
1.3.6.1.4.1.5504.9.1.36current
zhoneCpeVoipServerGroup
OBJECT-GROUP
Cpe Voip Server Table objects.
1.3.6.1.4.1.5504.9.1.37current
zhoneCpeIpGroup
OBJECT-GROUP
Cpe Ip Table objects.
1.3.6.1.4.1.5504.9.1.38current
zhoneCpeIpServerGroup
OBJECT-GROUP
Cpe Ip Server objects.
1.3.6.1.4.1.5504.9.1.39current
zhoneCpeVoipFeaturesGroup
OBJECT-GROUP
Cpe Voip Features Table objects.
1.3.6.1.4.1.5504.9.1.40current
zhoneCpeVoipMediaGroup
OBJECT-GROUP
Cpe Voip Media Table objects.
1.3.6.1.4.1.5504.9.1.41current
zhoneCpeVoipSubscriberGroup
OBJECT-GROUP
Cpe Voip Subscriber Table objects.
1.3.6.1.4.1.5504.9.1.42current
zhoneCpeEthSubscriberGroup
OBJECT-GROUP
Cpe Eth Subscriber Table objects.
1.3.6.1.4.1.5504.9.1.43current
zhoneCpeVideoGroup
OBJECT-GROUP
Cpe Video Table objects.
1.3.6.1.4.1.5504.9.1.44current
zhoneCpeVideoAccessControlGroup
OBJECT-GROUP
Cpe Video Access Control List Table objects.
1.3.6.1.4.1.5504.9.1.45current
zhoneCpePweSubscriberGroup
OBJECT-GROUP
Cpe Pwe Subscriber Table objects.
1.3.6.1.4.1.5504.9.1.46current
zhoneCpePweGroup
OBJECT-GROUP
Cpe Pwe Table objects.
1.3.6.1.4.1.5504.9.1.47current
zhoneCpeOnuModelInfoGroup
OBJECT-GROUP
Cpe Onu ModelInfo Table objects.
1.3.6.1.4.1.5504.9.1.48current
zhoneCpeConnectionGroup
OBJECT-GROUP
Cpe connection table objects
1.3.6.1.4.1.5504.9.1.49current
zhoneCpeRfSubscriberGroup
OBJECT-GROUP
Cpe RF Subscriber table objects.
1.3.6.1.4.1.5504.9.1.50current
zhoneCpeTrafficManagementGroup
OBJECT-GROUP
Cpe Traffic Management table objects.
1.3.6.1.4.1.5504.9.1.51current
zhoneCpeSystemGroup
OBJECT-GROUP
Cpe System table objects.
1.3.6.1.4.1.5504.9.1.53current
zhoneCpeSystemCommonGroup
OBJECT-GROUP
Cpe Systen Common table objects.
1.3.6.1.4.1.5504.9.1.54current
zhoneCpeInterfaceVlanGroup
OBJECT-GROUP
Cpe Interface Vlan table objects.
1.3.6.1.4.1.5504.9.1.55current
zhoneCpeDhcpServerGroup
OBJECT-GROUP
Cpe Dhcp Server table objects.
1.3.6.1.4.1.5504.9.1.56current
zhoneCpePppoeGroup
OBJECT-GROUP
Cpe Pppoe table objects.
1.3.6.1.4.1.5504.9.1.57current
zhoneCpeWlanSubscriberGroup
OBJECT-GROUP
Cpe Wlan Subscriber table objects.
1.3.6.1.4.1.5504.9.1.58current
zhoneCpeWlanGroup
OBJECT-GROUP
Cpe Wlan table objects.
1.3.6.1.4.1.5504.9.1.59current
zhoneCpeStaticRouteListGroup
OBJECT-GROUP
Cpe Static Route List table objects.
1.3.6.1.4.1.5504.9.1.60current
zhoneCpeStaticRouteGroup
OBJECT-GROUP
Cpe Static Route table objects.
1.3.6.1.4.1.5504.9.1.61current
zhoneCpePortFwdListGroup
OBJECT-GROUP
Cpe Port Fwd List table objects.
1.3.6.1.4.1.5504.9.1.62current
zhoneCpePortFwdGroup
OBJECT-GROUP
Cpe Port Fwd table objects.
1.3.6.1.4.1.5504.9.1.63current
zhoneCpeServiceApplicationGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.5504.9.1.64current
zhoneCpeDnsHostListGroup
OBJECT-GROUP
Cpe Dns Host List objects
1.3.6.1.4.1.5504.9.1.65current
zhoneCpeDnsHostGroup
OBJECT-GROUP
Cpe Dns Host Objects.
1.3.6.1.4.1.5504.9.1.66current
zhoneCpeWlanAdvGroup
OBJECT-GROUP
Cpe Wlan Advanced table objects.
1.3.6.1.4.1.5504.9.1.67current
zhoneCpeCondDhcpSrvListGroup
OBJECT-GROUP
Cpe Conditional DHCP server list objects
1.3.6.1.4.1.5504.9.1.68current
zhoneCpeCondDhcpSrvGroup
OBJECT-GROUP
Cpe Conditional DHCP server objects
1.3.6.1.4.1.5504.9.1.69current
zhoneCpeCmdGroup
OBJECT-GROUP
CPE command objects
1.3.6.1.4.1.5504.9.1.70current
zhoneCpeLldpMedPolicyListGroup
OBJECT-GROUP
Cpe LLDP-MED network policy list objects
1.3.6.1.4.1.5504.9.1.71current
zhoneCpeLldpMedPolicyGroup
OBJECT-GROUP
Cpe LLDP-MED network policy objects
1.3.6.1.4.1.5504.9.1.72current
zhoneCpeAutoCfgRuleGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.5504.9.1.73current
zhoneCpeCfgGlobalSettingsGroup
OBJECT-GROUP
Description.
1.3.6.1.4.1.5504.9.1.74current