ZYXEL-AS-MIB
- Registered at
- 1.3.6.1.4.1.890.1.5
- Namespace
- zyxel
- Source file
ZYXEL-AS-MIB- Digest
sha256:e377372d4d88c68e13c8a06cf61a23fd52771674a6b4671974cd0b9e93e4aaf7
Imports
| From | Symbols |
|---|---|
| BRIDGE-MIB | BridgeId, MacAddress, Timeout |
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
BRIDGE-MIB IANAifType-MIB IF-MIB P-BRIDGE-MIB Q-BRIDGE-MIB RFC1158-MIB RFC1271-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC TOKEN-RING-RMON-MIB ZYXEL-AS-MIB
Under this module's arcs
Where the registration tree carries on below this module.
| Arc | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.5.2 | aes100 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.3 | pes100 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.4 | ves1012 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.5 | sesSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.6 | p1600 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.7 | p1400 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.8 | esSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.9 | aes100_1 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.10 | pes1014 | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.11 | aesSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.12 | vesSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.13 | iesSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.14 | accessSwitchCommonATM | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.15 | ponSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.16 | vopSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.17 | gponSeries | ZYXEL-MIB |
| 1.3.6.1.4.1.890.1.5.18 | gesSeries | ZYXEL-MIB |
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| ASModuleType type | ||||
| ASSlotNum type |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| zyxel OBJECT-IDENTITY | 1.3.6.1.4.1.890 | |||
| products OBJECT-IDENTITY | 1.3.6.1.4.1.890.1 | |||
| accessSwitch OBJECT-IDENTITY | 1.3.6.1.4.1.890.1.5 | |||
| accessSwitchCommon OBJECT-IDENTITY | 1.3.6.1.4.1.890.1.5.1 | |||
| accessSwitchMgnt OBJECT-IDENTITY | 1.3.6.1.4.1.890.1.5.1.1 | |||
| accessSwitchSystemCurrentStatus OBJECT-TYPE This variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sysNoDefect 2 sysOverHeat 3 sysFanRpmLow 4 sysVoltageLow 5 sysThermalSensorFailure | 1.3.6.1.4.1.890.1.5.1.1.1 | INTEGER (0..255) | read-only | mandatory |
| accessSwitchProblemCause OBJECT-TYPE The variable is the description of sytsem problem. | 1.3.6.1.4.1.890.1.5.1.1.2 | DisplayString | read-only | mandatory |
| accessSwitchSystemTemperature OBJECT-TYPE The variable is the current temperature in Celsius of the system. | 1.3.6.1.4.1.890.1.5.1.1.3 | DisplayString | read-only | mandatory |
| accessSwitchFanRpmTable OBJECT-TYPE A table that contains rpm information about the fans. | 1.3.6.1.4.1.890.1.5.1.1.4 | not-accessible | mandatory | |
| accessSwitchFanRpmEntry OBJECT-TYPE A list of rpm information for each fan. | 1.3.6.1.4.1.890.1.5.1.1.4.1 | not-accessible | mandatory | |
| accessSwitchFanRpmIndex OBJECT-TYPE The identity of the fan. | 1.3.6.1.4.1.890.1.5.1.1.4.1.1 | INTEGER | read-only | mandatory |
| accessSwitchFanRpmCurValue OBJECT-TYPE The current rpm of the fan. | 1.3.6.1.4.1.890.1.5.1.1.4.1.2 | INTEGER | read-only | mandatory |
| accessSwitchFanRpmMaxValue OBJECT-TYPE The maximum rpm ever performed by the fan. | 1.3.6.1.4.1.890.1.5.1.1.4.1.3 | INTEGER | read-only | mandatory |
| accessSwitchFanRpmMinValue OBJECT-TYPE The minimum rpm ever performed by the fan. | 1.3.6.1.4.1.890.1.5.1.1.4.1.4 | INTEGER | read-only | mandatory |
| accessSwitchFanRpmLowThresh OBJECT-TYPE The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap. | 1.3.6.1.4.1.890.1.5.1.1.4.1.5 | INTEGER | read-only | mandatory |
| accessSwitchFanRpmDescr OBJECT-TYPE The description of the fan (e.g. location, function, etc.). | 1.3.6.1.4.1.890.1.5.1.1.4.1.6 | DisplayString | read-only | mandatory |
| accessSwitchVoltageTable OBJECT-TYPE A table that contains voltage information about the system. | 1.3.6.1.4.1.890.1.5.1.1.5 | not-accessible | mandatory | |
| accessSwitchVoltageEntry OBJECT-TYPE A list of voltage information for each sensor. | 1.3.6.1.4.1.890.1.5.1.1.5.1 | not-accessible | mandatory | |
| accessSwitchVoltageIndex OBJECT-TYPE The identity of the sensor. | 1.3.6.1.4.1.890.1.5.1.1.5.1.1 | INTEGER | read-only | mandatory |
| accessSwitchVoltageCurValue OBJECT-TYPE The current voltage detected by the sensor (in milli-voltage). | 1.3.6.1.4.1.890.1.5.1.1.5.1.2 | INTEGER | read-only | mandatory |
| accessSwitchVoltageMaxValue OBJECT-TYPE The maximum voltage ever detected by the sensor (in milli-voltage). | 1.3.6.1.4.1.890.1.5.1.1.5.1.3 | INTEGER | read-only | mandatory |
| accessSwitchVoltageMinValue OBJECT-TYPE The minimum voltage ever detected by the sensor (in milli-voltage). | 1.3.6.1.4.1.890.1.5.1.1.5.1.4 | INTEGER | read-only | mandatory |
| accessSwitchVoltageNominalValue OBJECT-TYPE The nominal voltage which the power should supply (in milli-voltage). | 1.3.6.1.4.1.890.1.5.1.1.5.1.5 | INTEGER | read-only | mandatory |
| accessSwitchVoltageLowThresh OBJECT-TYPE The low threshold of the voltage. If the current voltage is less than the threshold, the device will initiate the voltageLow trap. | 1.3.6.1.4.1.890.1.5.1.1.5.1.6 | INTEGER | read-only | mandatory |
| accessSwitchVoltageDescr OBJECT-TYPE The description of the voltage (e.g. location, nominal value, etc.). | 1.3.6.1.4.1.890.1.5.1.1.5.1.7 | DisplayString | read-only | mandatory |
| accessSwitchSysTempTable OBJECT-TYPE A table that contains temperature information about system. | 1.3.6.1.4.1.890.1.5.1.1.6 | not-accessible | mandatory | |
| accessSwitchSysTempEntry OBJECT-TYPE A list of temperature information for each sensor. | 1.3.6.1.4.1.890.1.5.1.1.6.1 | not-accessible | mandatory | |
| accessSwitchSysTempIndex OBJECT-TYPE The identity of the sensor. | 1.3.6.1.4.1.890.1.5.1.1.6.1.1 | INTEGER | read-only | mandatory |
| accessSwitchSysTempCurValue OBJECT-TYPE The current temperature detected in Celsius by the sensor. | 1.3.6.1.4.1.890.1.5.1.1.6.1.2 | INTEGER | read-only | mandatory |
| accessSwitchSysTempMaxValue OBJECT-TYPE The maximum temperature ever detected in Celsius by the sensor. | 1.3.6.1.4.1.890.1.5.1.1.6.1.3 | INTEGER | read-only | mandatory |
| accessSwitchSysTempMinValue OBJECT-TYPE The minimum temperature ever detected in Celsius by the sensor. | 1.3.6.1.4.1.890.1.5.1.1.6.1.4 | INTEGER | read-only | mandatory |
| accessSwitchSysTempHighThresh OBJECT-TYPE The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap. | 1.3.6.1.4.1.890.1.5.1.1.6.1.5 | INTEGER | read-only | mandatory |
| accessSwitchSysTempDescr OBJECT-TYPE The description of the temperature sensor (e.g. location, function, etc.). | 1.3.6.1.4.1.890.1.5.1.1.6.1.6 | DisplayString | read-only | mandatory |
| accessSwitchMaintenance OBJECT-TYPE The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: config save BIT 2: reset BIT 3: local loopback test BIT 4: remote loopback test | 1.3.6.1.4.1.890.1.5.1.1.7 | INTEGER | read-write | mandatory |
| accessSwitchMaintenancePort OBJECT-TYPE The port which the maintenance operation should be performed on. The value of 0 means the maintenance should be performed on the system. | 1.3.6.1.4.1.890.1.5.1.1.8 | INTEGER | read-write | mandatory |
| accessSwitchMaxNumOfStaticVlans OBJECT-TYPE The maximum number of static VLANs which the system supports | 1.3.6.1.4.1.890.1.5.1.1.9 | INTEGER | read-only | mandatory |
| acccessSwitchChassisId OBJECT-TYPE The chassis Id of the module | 1.3.6.1.4.1.890.1.5.1.1.10 | INTEGER | read-write | mandatory |
| accessSwitchSlotId OBJECT-TYPE The slot Id of the module | 1.3.6.1.4.1.890.1.5.1.1.11 | ASSlotNum | read-write | mandatory |
| accessSwitchModuleType OBJECT-TYPE The type of the module | 1.3.6.1.4.1.890.1.5.1.1.12 | ASModuleType | read-only | mandatory |
| accessSwitchFWVersion OBJECT-TYPE The firmware version of the access switch. | 1.3.6.1.4.1.890.1.5.1.1.13 | DisplayString | read-only | mandatory |
| accessSwitchDriverVersion OBJECT-TYPE The driver version of the access port in this access switch | 1.3.6.1.4.1.890.1.5.1.1.14 | DisplayString | read-only | mandatory |
| accessSwitchModemCodeVersion OBJECT-TYPE The modem code version of the access port in this access switch | 1.3.6.1.4.1.890.1.5.1.1.15 | DisplayString | read-only | mandatory |
| accessSwitchDSLConfOps OBJECT-TYPE The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set DSL mode BIT 4: set profile | 1.3.6.1.4.1.890.1.5.1.1.16 | INTEGER | read-write | mandatory |
| accessSwitchDSLConfTarget OBJECT-TYPE The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~4: reserved Byte 5~7: each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. Byte 8~10: reserved | 1.3.6.1.4.1.890.1.5.1.1.17 | OCTET STRING | read-write | mandatory |
| accessSwitchDSLConfProfileName OBJECT-TYPE The DSL profile name | 1.3.6.1.4.1.890.1.5.1.1.18 | DisplayString (SIZE(1..31)) | read-write | mandatory |
| accessSwitchDSLConfMode OBJECT-TYPE The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto | 1.3.6.1.4.1.890.1.5.1.1.19 | INTEGER | read-write | mandatory |
| asPacketForwardingTable OBJECT-TYPE This table includes the configuration of packet forwarding. | 1.3.6.1.4.1.890.1.5.1.1.20 | not-accessible | mandatory | |
| asPacketForwardingEntry OBJECT-TYPE An entry in asPacketForwardingTable. | 1.3.6.1.4.1.890.1.5.1.1.20.1 | not-accessible | mandatory | |
| asPacketForwardingPortList OBJECT-TYPE The list defines the ports to which the packets will be forwarded. | 1.3.6.1.4.1.890.1.5.1.1.20.1.1 | PortList | read-write | mandatory |
| asDhcpRelayEnable OBJECT-TYPE Enable/disable DHCP relay function. | 1.3.6.1.4.1.890.1.5.1.1.21 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| asDhcpRelayOption82Enable OBJECT-TYPE Enable/disable the relay agent information option. | 1.3.6.1.4.1.890.1.5.1.1.22 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| asDhcpRelayOption82Info OBJECT-TYPE User specific relay agent information. | 1.3.6.1.4.1.890.1.5.1.1.23 | DisplayString | read-write | mandatory |
| asMaxNumOfDhcpServers OBJECT-TYPE The maximum number of DHCP servers. | 1.3.6.1.4.1.890.1.5.1.1.24 | INTEGER | read-only | mandatory |
| asDhcpServerTable OBJECT-TYPE A table that contains DHCP server information. | 1.3.6.1.4.1.890.1.5.1.1.25 | not-accessible | mandatory | |
| asDhcpServerEntry OBJECT-TYPE The entry of DHCP server table. | 1.3.6.1.4.1.890.1.5.1.1.25.1 | not-accessible | mandatory | |
| asDhcpServerIp OBJECT-TYPE The IP address of the DHCP server. | 1.3.6.1.4.1.890.1.5.1.1.25.1.1 | IpAddress | read-only | mandatory |
| asDhcpServerRowStatus OBJECT-TYPE The row status of the DHCP server entry. | 1.3.6.1.4.1.890.1.5.1.1.25.1.2 | RowStatus | read-write | mandatory |
| asMaxNumberOfRadiusServers OBJECT-TYPE The max number of the RADIUS Servers. | 1.3.6.1.4.1.890.1.5.1.1.28 | INTEGER | read-only | mandatory |
| asRadiusServerTable OBJECT-TYPE A table that contains Radius Server information. | 1.3.6.1.4.1.890.1.5.1.1.29 | not-accessible | mandatory | |
| asRadiusServerEntry OBJECT-TYPE The entry of Radius Server table. | 1.3.6.1.4.1.890.1.5.1.1.29.1 | not-accessible | mandatory | |
| asRadiusServerIndex OBJECT-TYPE The identity of the RADIUS server. | 1.3.6.1.4.1.890.1.5.1.1.29.1.1 | INTEGER | read-only | mandatory |
| asRadiusServerIp OBJECT-TYPE The IP address of the Radius Server. | 1.3.6.1.4.1.890.1.5.1.1.29.1.2 | IpAddress | read-write | mandatory |
| asRadiusServerPort OBJECT-TYPE The UDP port of the Radius Server. | 1.3.6.1.4.1.890.1.5.1.1.29.1.3 | INTEGER | read-write | mandatory |
| asRadiusSharedSecret OBJECT-TYPE The shared secret of the Radius Server. | 1.3.6.1.4.1.890.1.5.1.1.29.1.4 | DisplayString | read-write | mandatory |
| asRadiusServerRowStatus OBJECT-TYPE The row status of the Radius Server entry. | 1.3.6.1.4.1.890.1.5.1.1.29.1.5 | RowStatus | read-write | mandatory |
| asDot1xEnable OBJECT-TYPE Enable/disable the 802.1x function. | 1.3.6.1.4.1.890.1.5.1.1.30 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| asDot1xPortTable OBJECT-TYPE This table includes the configuration of 802.1x. | 1.3.6.1.4.1.890.1.5.1.1.31 | not-accessible | mandatory | |
| asDot1xPortEntry OBJECT-TYPE An entry in asDot1xPortTable. | 1.3.6.1.4.1.890.1.5.1.1.31.1 | not-accessible | mandatory | |
| asDot1xPortEnable OBJECT-TYPE The option defines if the port enables 802.1x settings. | 1.3.6.1.4.1.890.1.5.1.1.31.1.1 | INTEGER {enable(1), disable(2)} | read-write | mandatory |
| asDot1xPortControl OBJECT-TYPE The configuration defines the 802.1x port control type. | 1.3.6.1.4.1.890.1.5.1.1.31.1.2 | INTEGER {auto(1), forceAuth(2), forceUnAuth(3)} | read-write | mandatory |
| asDot1xPortReAuthEnable OBJECT-TYPE The option defines if the port enables 802.1x re-authentication. | 1.3.6.1.4.1.890.1.5.1.1.31.1.3 | INTEGER {on(1), off(2)} | read-write | mandatory |
| asDot1xPortReAuthPeriod OBJECT-TYPE The configuration defines the 802.1x re-authentication period for each port. | 1.3.6.1.4.1.890.1.5.1.1.31.1.4 | INTEGER | read-write | mandatory |
| accessSwitchStats OBJECT-IDENTITY | 1.3.6.1.4.1.890.1.5.1.2 | |||
| asMacStats OBJECT-IDENTITY | 1.3.6.1.4.1.890.1.5.1.2.1 | |||
| asMacDisplayTarget OBJECT-TYPE This managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target should be IfIndex which is used for identifying subscriber ports (e.g. 300 means all ports in slot 3 and 301 means port 1 in slot 3). | 1.3.6.1.4.1.890.1.5.1.2.1.1 | INTEGER | read-write | current |
| asMacTable OBJECT-TYPE A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame. | 1.3.6.1.4.1.890.1.5.1.2.1.2 | not-accessible | current | |
| asMacEntry OBJECT-TYPE An entry of asMacTable. | 1.3.6.1.4.1.890.1.5.1.2.1.2.1 | not-accessible | current | |
| asMacAddress OBJECT-TYPE A unicast MAC address for which the bridge has forwarding and/or filtering information. | 1.3.6.1.4.1.890.1.5.1.2.1.2.1.1 | MacAddress | read-only | current |
| asMacPort OBJECT-TYPE The port from which the mac address has been learned. | 1.3.6.1.4.1.890.1.5.1.2.1.2.1.2 | INTEGER | read-only | current |
| asMacStatus OBJECT-TYPE The status of this entry. | 1.3.6.1.4.1.890.1.5.1.2.1.2.1.3 | INTEGER {other(1), invalid(2), learned(3), self(4), mgmt(5)} | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| reboot NOTIFICATION-TYPE Send a message to the manager that the system is going to reboot. The variable is the reason why the system reboots. | 1.3.6.1.4.1.890.1.5.0.1 | |
| systemShutdown NOTIFICATION-TYPE Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown. | 1.3.6.1.4.1.890.1.5.0.2 | |
| overheat NOTIFICATION-TYPE Send a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system. | 1.3.6.1.4.1.890.1.5.0.3 | |
| overheatOver NOTIFICATION-TYPE Send a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system. | 1.3.6.1.4.1.890.1.5.0.4 | |
| errLog NOTIFICATION-TYPE Send a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log. | 1.3.6.1.4.1.890.1.5.0.5 | |
| fanRpmLow NOTIFICATION-TYPE Send a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan. | 1.3.6.1.4.1.890.1.5.0.6 | |
| fanRpmNormal NOTIFICATION-TYPE Send a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan. | 1.3.6.1.4.1.890.1.5.0.7 | |
| voltageOutOfRange NOTIFICATION-TYPE Send a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system. | 1.3.6.1.4.1.890.1.5.0.8 | |
| voltageNormal NOTIFICATION-TYPE Send a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system. | 1.3.6.1.4.1.890.1.5.0.9 | |
| systemMaintenanceFailure NOTIFICATION-TYPE Send a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem. | 1.3.6.1.4.1.890.1.5.0.10 | |
| configChange NOTIFICATION-TYPE Send a message to the manager that the system configuration data is changed. | 1.3.6.1.4.1.890.1.5.0.11 | |
| thermalSensorFailure NOTIFICATION-TYPE The trap signifies that the thermal sensor failed. | 1.3.6.1.4.1.890.1.5.0.12 |