MIBs Depot

ZYXEL-AESCOMMON-MIB

Registered at
1.3.6.1.4.1.890.1.5.11.1.3
1.3.6.1.4.1.890.1.5.11.1.4
1.3.6.1.4.1.890.1.5.11.1.8
Namespace
zyxel
Source file
ZYXEL-AESCOMMON-MIB
Digest
sha256:3b750c4cb2adbd0bb6ffe391a5304131f06d4fb0d81ac29e2b3fee6c224f5bf1

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION
ZYXEL-MIBaesSeriesCommon

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
ZYXEL-AESCOMMON-MIB
ZYXEL-MIB

Objects

NameOIDSyntaxAccessStatus
aesMaxNumOfProfiles
OBJECT-TYPE
The maximum number of ADSL profiles which the system supports.
1.3.6.1.4.1.890.1.5.11.1.1INTEGERread-onlymandatory
aesLineConfTable
OBJECT-TYPE
This table includes common attributes describing the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2not-accessiblemandatory
aesLineConfEntry
OBJECT-TYPE
An entry in aesLineConfTable.
1.3.6.1.4.1.890.1.5.11.1.2.1not-accessiblemandatory
aesLineConfAdslMode
OBJECT-TYPE
The mode of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2.1.1INTEGER {gDotLite(1), gDotDmt(2), t1Dot413(3), auto(4), etsi(5), adsl2(6), adsl2Plus(7)}read-writemandatory
aesLineConfEncap
OBJECT-TYPE
The encapsulation of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2.1.2INTEGER {llc(1), vc(2)}read-writemandatory
aesLineConfVpi
OBJECT-TYPE
The VPI of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2.1.3INTEGERread-writemandatory
aesLineConfVci
OBJECT-TYPE
The VCI of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2.1.4INTEGERread-writemandatory
aesLineConfAnnexL
OBJECT-TYPE
The annex L setting of the ADSL line(Only in AnnexA).
1.3.6.1.4.1.890.1.5.11.1.2.1.5INTEGER {enableNarrowMode(1), enableWideMode(2), disable(3)}read-writemandatory
aesLineConfPmMode
OBJECT-TYPE
The power management mode of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2.1.6INTEGER {enableL2Mode(1), enableL3Mode(2), disable(3)}read-writemandatory
aesLineConfRateMode
OBJECT-TYPE
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
1.3.6.1.4.1.890.1.5.11.1.2.1.7INTEGER {fixed(1), adaptAtStartup(2), adaptAtRuntime(3)}read-writemandatory
aesLineConfAnnexM
OBJECT-TYPE
The annex M setting of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.2.1.8INTEGER {enable(1), disable(2)}read-writemandatory
aesLineDiagnostic
OBJECT-IDENTITY
1.3.6.1.4.1.890.1.5.11.1.3
aesAtucLineDiagLATN
OBJECT-TYPE
Line Attenuation.
1.3.6.1.4.1.890.1.5.11.1.3.1INTEGERread-onlymandatory
aesAtucLineDiagSATN
OBJECT-TYPE
Signal Attenuation.
1.3.6.1.4.1.890.1.5.11.1.3.2INTEGERread-onlymandatory
aesAtucLineDiagSNRM
OBJECT-TYPE
Signal-to-Noise Ratio Margin.
1.3.6.1.4.1.890.1.5.11.1.3.3INTEGERread-onlymandatory
aesAtucLineDiagACTATP
OBJECT-TYPE
Actual Aggregate Transmit Power.
1.3.6.1.4.1.890.1.5.11.1.3.4INTEGERread-onlymandatory
aesAtucLineDiagATTNDR
OBJECT-TYPE
Attainable Net Data Rate, in bps.
1.3.6.1.4.1.890.1.5.11.1.3.5Unsigned32read-onlymandatory
aesAturLineDiagLATN
OBJECT-TYPE
Line Attenuation.
1.3.6.1.4.1.890.1.5.11.1.3.6INTEGERread-onlymandatory
aesAturLineDiagSATN
OBJECT-TYPE
Signal Attenuation.
1.3.6.1.4.1.890.1.5.11.1.3.7INTEGERread-onlymandatory
aesAturLineDiagSNRM
OBJECT-TYPE
Signal-to-Noise Ratio Margin.
1.3.6.1.4.1.890.1.5.11.1.3.8INTEGERread-onlymandatory
aesAturLineDiagACTATP
OBJECT-TYPE
Actual Aggregate Transmit Power.
1.3.6.1.4.1.890.1.5.11.1.3.9INTEGERread-onlymandatory
aesAturLineDiagATTNDR
OBJECT-TYPE
Attainable Net Data Rate, in bps.
1.3.6.1.4.1.890.1.5.11.1.3.10Unsigned32read-onlymandatory
aesLineDiagTarget
OBJECT-TYPE
Ifindex of the ADSL port which will be diagnosed.
1.3.6.1.4.1.890.1.5.11.1.3.11INTEGERread-writemandatory
aesLineDiagOps
OBJECT-TYPE
The manager sets the object to one to start line diagnostics and the agent clears the object to zero when diagnostics is successfully completed.
1.3.6.1.4.1.890.1.5.11.1.3.12INTEGERread-writemandatory
aesLineDiagFailReason
OBJECT-TYPE
The reason of failed diagnostics.
1.3.6.1.4.1.890.1.5.11.1.3.13DisplayStringread-onlymandatory
aesLineDiagPs
OBJECT-IDENTITY
1.3.6.1.4.1.890.1.5.11.1.4
aesAtucNumOfSubcarriersPerPort
OBJECT-TYPE
The number of subcarriers per port for ATU-C.
1.3.6.1.4.1.890.1.5.11.1.4.1INTEGERread-onlymandatory
aesAturNumOfSubcarriersPerPort
OBJECT-TYPE
The number of subcarriers per port for ATU-R.
1.3.6.1.4.1.890.1.5.11.1.4.2INTEGERread-onlymandatory
aesLineDiagPsCCFLirl1
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 1, and the second two octets specify the li.rl value for subcarrier 2, and so on. The object provides li.rl values for subcarrier 1 to 256.
1.3.6.1.4.1.890.1.5.11.1.4.3OCTET STRINGread-onlymandatory
aesLineDiagPsCCFLirl2
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl value for subcarrier 257, and the second two octets specify the li.rl value for subcarrier 258, and so on. The object provides li.rl values for subcarrier 257 to 512.
1.3.6.1.4.1.890.1.5.11.1.4.4OCTET STRINGread-onlymandatory
aesLineDiagPsCCFLiim1
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 1, and the second two octets specify the li.im value for subcarrier 2, and so on. The object provides li.im values for subcarrier 1 to 256.
1.3.6.1.4.1.890.1.5.11.1.4.5OCTET STRINGread-onlymandatory
aesLineDiagPsCCFLiim2
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im value for subcarrier 257, and the second two octets specify the li.im value for subcarrier 258, and so on. The object provides li.im values for subcarrier 257 to 512.
1.3.6.1.4.1.890.1.5.11.1.4.6OCTET STRINGread-onlymandatory
aesLineDiagPsCCFLog1
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 1, and the second two octets specify the log value for subcarrier 2, and so on. The object provides log values for subcarrier 1 to 256.
1.3.6.1.4.1.890.1.5.11.1.4.7OCTET STRINGread-onlymandatory
aesLineDiagPsCCFLog2
OBJECT-TYPE
Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for subcarrier 257, and the second two octets specify the log value for subcarrier 258, and so on. The object provides log values for subcarrier 257 to 512.
1.3.6.1.4.1.890.1.5.11.1.4.8OCTET STRINGread-onlymandatory
aesLineDiagPsQLN
OBJECT-TYPE
Quiet Line Noise PSD QLN(f) per subcarrier. The first octet specify QLN for subcarrier 1, and the second octet specify QLN for subcarrier 2, and so on. The object provides QLN for subcarrier 1 to 512.
1.3.6.1.4.1.890.1.5.11.1.4.9OCTET STRINGread-onlymandatory
aesLineDiagPsSNR
OBJECT-TYPE
Signal-to-Noise Ratio SNR(f) per subcarrier. The first octet specify SNR for subcarrier 1, and the second octet specify SNR for subcarrier 2, and so on. The object provides SNR for subcarrier 1 to 512.
1.3.6.1.4.1.890.1.5.11.1.4.10OCTET STRINGread-onlymandatory
aesMaxNumOfAlarmProfiles
OBJECT-TYPE
The maximum number of ADSL alarm profiles which the system supports.
1.3.6.1.4.1.890.1.5.11.1.5INTEGERread-onlymandatory
aesBitLoadingTable
OBJECT-TYPE
This table provides the number of bits per carrier for each ADSL port.
1.3.6.1.4.1.890.1.5.11.1.6not-accessiblemandatory
aesBitLoadingEntry
OBJECT-TYPE
An entry in aesBitLoadingTable.
1.3.6.1.4.1.890.1.5.11.1.6.1not-accessiblemandatory
aesBitLoadingBits
OBJECT-TYPE
This object provides the number of bits for all carriers in the port. The first octet specify the number of bits for carrier 1, and the second octet specify the number of bits for carrier 2, and so on. The object provides the number of bits for carrier 1 to 512.
1.3.6.1.4.1.890.1.5.11.1.6.1.1OCTET STRINGread-onlymandatory
aesBitLoadingAtucNumOfCarriers
OBJECT-TYPE
The number of carriers for ATU-C.
1.3.6.1.4.1.890.1.5.11.1.6.1.2INTEGERread-onlymandatory
aesBitLoadingAturNumOfCarriers
OBJECT-TYPE
The number of carriers for ATU-R.
1.3.6.1.4.1.890.1.5.11.1.6.1.3INTEGERread-onlymandatory
aesLineStatusTable
OBJECT-TYPE
This table includes the ADSL line status.
1.3.6.1.4.1.890.1.5.11.1.7not-accessiblemandatory
aesLineStatusEntry
OBJECT-TYPE
An entry in aesLineStatusTable.
1.3.6.1.4.1.890.1.5.11.1.7.1not-accessiblemandatory
aesLineStatusAdslMode
OBJECT-TYPE
The link up mode of the ADSL line.
1.3.6.1.4.1.890.1.5.11.1.7.1.1INTEGER {gDotLite(1), gDotDmt(2), t1Dot413(3), etsi(4), adsl2(5), adsl2Plus(6)}read-onlymandatory
selt
OBJECT-IDENTITY
1.3.6.1.4.1.890.1.5.11.1.8
seltTarget
OBJECT-TYPE
IfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.890.1.5.11.1.8.1INTEGERread-writecurrent
seltOps
OBJECT-TYPE
The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
1.3.6.1.4.1.890.1.5.11.1.8.2INTEGERread-writecurrent
seltStatus
OBJECT-TYPE
Status description of the selt result.
1.3.6.1.4.1.890.1.5.11.1.8.3DisplayStringread-onlycurrent
seltCableType
OBJECT-TYPE
The cable type that selt result indicates.
1.3.6.1.4.1.890.1.5.11.1.8.4INTEGER {awg24(1), awg26(2)}read-onlycurrent
seltLoopEstimateLengthFt
OBJECT-TYPE
The estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.11.1.8.5INTEGERread-onlycurrent
seltLoopEstimateLengthMeter
OBJECT-TYPE
The estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.11.1.8.6INTEGERread-onlycurrent