MIBs Depot

ZHONE-ISDN-MIB

Registered at
1.3.6.1.4.1.5504.3.8.3
1.3.6.1.4.1.5504.5.7
Last updated
2003-03-03 19:44
Organization
Zhone Technologies.
Revisions
2003-03-03 11:58, 2003-02-04 18:04, 2000-09-27 10:57, 2000-09-27 19:42
Namespace
zhone
Source file
ZHONE-ISDN-MIB
Digest
sha256:ef42b8e0a47476c4550cc90b1019795c401f027e6200cf5ad0a8389e5b92cb77

Description

ISDN BRI S/T Interface MIB module. This MIB manages the ISDN BRI S/T Interface on Zedge .

Contact

Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com

Imports

FromSymbols
IF-MIBifIndex
PerfHist-TC-MIBPerfCurrentCount, PerfIntervalCount, PerfTotalCount
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION
ZhonezhonePhysical, zhoneTrapModules

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
PerfHist-TC-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
ZHONE-ISDN-MIB
Zhone

Objects

NameOIDSyntaxAccessStatus
zhoneIsdnTrap
OBJECT-IDENTITY
Trap for zedge to be sent to ZMS for far end code violation.
1.3.6.1.4.1.5504.3.8.3current
isdnMibV2Traps
OBJECT-IDENTITY
This object identity adds a zero(0) for the next to last sub-identifier which should be used for new SNMPv2 Traps.
1.3.6.1.4.1.5504.3.8.3.1current
zhoneIsdnMib
OBJECT-IDENTITY
1.3.6.1.4.1.5504.5.7.1
isdnConfigTable
OBJECT-TYPE
The ISDN BRI integrated S/T Interface Configuration Table. This table is indexed by IfIndex.It is created by aplication when the system comes up with default values.
1.3.6.1.4.1.5504.5.7.1.1not-accessiblecurrent
isdnConfigEntry
OBJECT-TYPE
An entry in the ISDN config table for each S/T Interface.
1.3.6.1.4.1.5504.5.7.1.1.1not-accessiblecurrent
isdnLineTermClass
OBJECT-TYPE
NT Terminal Mode.clas1 and class2 operations are as per CCITT I.430, ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes of operation for a TE with respect to D channel operation class1 : class1 is the higher class , used for signalling information class2 : This is the lower class. The default value is class1.
1.3.6.1.4.1.5504.5.7.1.1.1.1INTEGER {class1(1), class2(2)}read-writecurrent
isdnActivationTimer2
OBJECT-TYPE
Value of Activation Timer #2. t2-50ms(1): select 50ms for timer #2 t2-100ms(2): select 1000ms for timer #2 The default value is t2-50ms
1.3.6.1.4.1.5504.5.7.1.1.1.2INTEGER {t2-50ms(1), t2-100ms(2)}read-writecurrent
isdnLineLoopBack
OBJECT-TYPE
loop-back-none(1) :no loop back . loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel). loop-back-b1-st-nt(3): non-transparent loopback onthe S/T interface towards the user(B1 chanel).. loop-back-b2-st-tr(4) :transparaent loopback on the S/T interface towards the user(B2 chanel). loop-back-b2-st-nt(5):non-transparent loopback on the S/T interface towards the user(B2 channel) loop-back-b1-idl2-tr(6):transparaent loopback on the IDL2 interface towards the system(B1 channel) loop-back-b1-idl2-nt(7):non-transparent loopback on the IDL2 interface towards the system(B1 channel) loop-back-b2-idl2-tr(8):transparaent loopback on the IDL2 interface towards the system(B2 channel) loop-back-b2-idl2-nt(9): non-transparent loopback on the IDL2 interface towards the system(B2 channel) loop-back-2bd-idl2-tr(10): transparent loopback on the IDL2 towards the system(2B + D channel) loop-back-2bd-idl2-nt(11): non-transparent loopback on the IDL2 towards the system(2B + D channel) loop-back-2bd-u-interface-tr (12): transparent loopback on the U interface towards the user(2B + D channel) loop-back-2bd-u-interface-nt (13): non-transparent loopback on the U interface(2B + D channel) loop-back-2bd-external-analog(14): loopback on the external analog interface towards the user(2B + D channel) st is loopback on the S/T interface towards the user. idl2 is loopback on the IDL2 interface towards the system. tr is transparent loopback. nt is non-transparent loopback. The default value is loop-back-none.
1.3.6.1.4.1.5504.5.7.1.1.1.3INTEGER {loop-back-none(1), loop-back-b1-st-tr(2), loop-back-b1-st-nt(3), loop-back-b2-st-tr(4), loop-back-b2-st-nt(5), loop-back-b1-idl2-tr(6), loop-back-b1-idl2-nt(7), loop-back-b2-idl2-tr(8), loop-back-b2-idl2-nt(9), loop-back-2bd-idl2-tr(10), loop-back-2bd-idl2-nt(11), loop-back-2bd-u-interface-tr(12), loop-back-2bd-u-interface-nt(13), loop-back-2bd-external-analog(14)}read-writecurrent
isdnLinePower
OBJECT-TYPE
State of the line power. off - no power on line. sealing - minimum current on line to preclude corrosion. powering - full current on line.
1.3.6.1.4.1.5504.5.7.1.1.1.4INTEGER {off(1), sealing(2), powering(3)}read-writecurrent
isdnPerfDataCurrentTable
OBJECT-TYPE
The ISDN BRI S/T interface performance table which contains the performance data for curent 15 minutes. It contains information about the status of the ISDN S/T interface, including the error statistics.
1.3.6.1.4.1.5504.5.7.1.2not-accessiblecurrent
isdnPerfDataCurrentEntry
OBJECT-TYPE
An entry in current performance table for each ISDN BRI S/T interface for last 15 minutes.
1.3.6.1.4.1.5504.5.7.1.2.1not-accessiblecurrent
isdnPerfCurBadAmiViolation
OBJECT-TYPE
Current count of frames with incorrect number of AMI violations.
1.3.6.1.4.1.5504.5.7.1.2.1.1PerfCurrentCountread-onlycurrent
isdnPerfCurUnbalancedFrame
OBJECT-TYPE
Current count of unbalanced frames.
1.3.6.1.4.1.5504.5.7.1.2.1.2PerfCurrentCountread-onlycurrent
isdnPerCurErrorSeconds
OBJECT-TYPE
Curent ISDN Activation error seconds.
1.3.6.1.4.1.5504.5.7.1.2.1.3PerfCurrentCountread-onlycurrent
isdnPerCurFsyncSeconds
OBJECT-TYPE
Currents Frame synch loss seconds .
1.3.6.1.4.1.5504.5.7.1.2.1.4PerfCurrentCountread-onlycurrent
isdnPerfCurTimeElapsed
OBJECT-TYPE
In the current 15 Min period number of seconds elapsed that these counts represent.
1.3.6.1.4.1.5504.5.7.1.2.1.5TimeTicksread-onlycurrent
isdnPerfDataPreviousTable
OBJECT-TYPE
The ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics for previous 15 minutes.
1.3.6.1.4.1.5504.5.7.1.3not-accessiblecurrent
isdnPerfDataPreviousEntry
OBJECT-TYPE
An entry in Previous performance table(for last 15 minutes before the current performance period) for each S/T interface.
1.3.6.1.4.1.5504.5.7.1.3.1not-accessiblecurrent
isdnPerfPrevBadAmiViolation
OBJECT-TYPE
count of frames with incorrect number of AMI violations in previous 15 minutes.
1.3.6.1.4.1.5504.5.7.1.3.1.1PerfIntervalCountread-onlycurrent
isdnPerfPrevUnbalancedFrame
OBJECT-TYPE
In previous 15 minutes ,count of unbalanced frames.
1.3.6.1.4.1.5504.5.7.1.3.1.2PerfIntervalCountread-onlycurrent
isdnPerPrevFsyncSeconds
OBJECT-TYPE
Frame synch error seconds in previous 15 minues.
1.3.6.1.4.1.5504.5.7.1.3.1.3PerfIntervalCountread-onlycurrent
isdnPerfPrevErrorSeconds
OBJECT-TYPE
In previous 15 minutes ISDN Activation error seconds
1.3.6.1.4.1.5504.5.7.1.3.1.4PerfIntervalCountread-onlycurrent
isdnPerfDataTotalTable
OBJECT-TYPE
The ISDN BRI S/T interface performance table, it contains statistics and information about the status of the ISDN S/T interface, including the error statistics for up to the the last 24 hours. This is maintained in 15 minute intervals NOT including the current interval being accumulated. When the current period reaches 15 minutes, it's counts are rolled into the previous entry and added to these values. The 97th entry, previous to the 24 hour period is no longer included in these counts.
1.3.6.1.4.1.5504.5.7.1.4not-accessiblecurrent
isdnPerfDataTotalEntry
OBJECT-TYPE
An entry in total performance table for each S/T interface.
1.3.6.1.4.1.5504.5.7.1.4.1not-accessiblecurrent
isdnPerfTotalBadAmiViolation
OBJECT-TYPE
Total count of frames with incorrect number of AMI violations.
1.3.6.1.4.1.5504.5.7.1.4.1.1PerfTotalCountread-onlycurrent
isdnPerfTotalUnbalancedFrame
OBJECT-TYPE
Total count of unbalanced frames.
1.3.6.1.4.1.5504.5.7.1.4.1.2PerfTotalCountread-onlycurrent
isdnPerTotalFsyncSeconds
OBJECT-TYPE
Total Frame synch error seconds.
1.3.6.1.4.1.5504.5.7.1.4.1.3PerfTotalCountread-onlycurrent
isdnPerfTotalErrorSeconds
OBJECT-TYPE
ISDN Activation error seconds
1.3.6.1.4.1.5504.5.7.1.4.1.4PerfTotalCountread-onlycurrent
isdnPerfTotalTimePeriodsElapsed
OBJECT-TYPE
Number of 15 minute time periods that have been used in the performance total table. This value is normally 96 indicating a valid 24 hour time period except in the cases of a restart of this agent.
1.3.6.1.4.1.5504.5.7.1.4.1.5Integer32 (0..96)read-onlycurrent
isdnAlarmProfileTable
OBJECT-TYPE
This table contains information for Alarm conditions. The table is indexed by IfIndex . The alarm profile will be set per port basis usig ifIndex by the application when the system comes up. The operator can not create the profile , he can only change it .
1.3.6.1.4.1.5504.5.7.1.5not-accessiblecurrent
isdnAlarmProfileEntry
OBJECT-TYPE
An entry in AlarmProfile Table.
1.3.6.1.4.1.5504.5.7.1.5.1not-accessiblecurrent
isdnThresholdAmiViolations
OBJECT-TYPE
Threshold for number of AMI violation . If the number of violations cross this threshold then the notification is sent to NMS. 0 will disable the trap. The default value is 0. There is no range speciffied for this.
1.3.6.1.4.1.5504.5.7.1.5.1.1Unsigned32read-writecurrent
isdnThresholdUnbalancedFrame
OBJECT-TYPE
Threshold for number of unbalanced frame after which the trap will be send to NMS.0 will disable the trap. The default value is 0. There is no range speciffied for this.
1.3.6.1.4.1.5504.5.7.1.5.1.2Unsigned32read-writecurrent

Notifications

NameOIDStatus
isdnTrapFrameSynchLoss
NOTIFICATION-TYPE
When the driver receives three successive out of synch frames then it will set the frame synch loss bit to true and then the application will send a trap to the NMS. After this when the driver detects 5 good frames then it will set the frame synch lossbit to false.
1.3.6.1.4.1.5504.3.8.3.1.1current
isdnTrapFECV
NOTIFICATION-TYPE
Far end code violation Trap
1.3.6.1.4.1.5504.3.8.3.1.2current
isdnTrapAmiViolations
NOTIFICATION-TYPE
Bad Ami violation Trap. If number of ami violation crosses the isdnThresholdAmiViolations then the application will send this to NMS.
1.3.6.1.4.1.5504.3.8.3.1.3current
isdnTrapUnbalancedFrame
NOTIFICATION-TYPE
This trap will be sent to NMS after the isdnThresholdUnbalancedFrame value is crossed.
1.3.6.1.4.1.5504.3.8.3.1.4current