ZHONE-GEN-WTN-MONITOR-MIB

Registered at: 1.3.6.1.4.1.5504.3.9.1

1.3.6.1.4.1.5504.3.9.2

1.3.6.1.4.1.5504.6.102
Last updated: 1900-09-28 12:16
Organization: Zhone Technologies, Inc.
Revisions: 1901-05-25 21:36
Namespace: zhone
Source file: ZHONE-GEN-WTN-MONITOR-MIB
Digest: sha256:9d4f542a1b5d38d25fedcf9909d4cf04b0965f21340189684340d6f149f9690a

Description

Module for wireless transport node (ZWT) variables which report general system status.

Contact

Postal: Zhone Technologies, Inc. @ Zhone Way 7001 Oakport Street Oakland, CA 94621 USA Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com

Imports

From	Symbols
SNMP-FRAMEWORK-MIB	`SnmpAdminString`
SNMPv2-CONF	`MODULE-COMPLIANCE, NOTIFICATION-GROUP`
SNMPv2-SMI	`MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso`
SNMPv2-TC	`DisplayString, TEXTUAL-CONVENTION`
Zhone	`zhoneGenWtn, zhoneModules`

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMP-FRAMEWORK-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
ZHONE-GEN-WTN-MONITOR-MIB
Zhone

Objects

Name	OID	Syntax	Access	Status
wtnMonitor OBJECT-IDENTITY Collection of monitored elements for each wireless transport node.	1.3.6.1.4.1.5504.3.9.1			current
wtnLedStatus OBJECT-TYPE Reflects current state of LEDs of indoor unit. A bit value of 1 indicates the LED is ON. A bit value of 0 indicates the LED of OFF. Meaning of LEDs: =========================================== diag - Upon power up the LED is turned on. If the unit successfully passes diagnostics, the LED is turned off. When operational, the LED is turned on when diagnostics are performed or when the system detects an alarm. operational - Upon power up the LED is off. When the system is operating it is turned on. The actual LED is blinked when the ZMS link is down or during software download. lineInterface - This LED is turned on when there are no wire-line alarms. For SkyZhone45 - this refers to the DS3 line. For SkyZhone155 - this refers to the fiber. For SkyZhone8e - this refers to the set of T1/E1 lines. radio - This LED is turned on when there are no radio receive alarms. local- This LED is turned on when there are not alarms present on the Near End indoor or outdoor units. remote - This LED is turned on when there are not alarms present on the Far End indoor or outdoor units.	1.3.6.1.4.1.5504.3.9.1.1	Bits {diag(0), operational(1), lineInterface(2), radio(3), local(4), remote(5)}	read-only	current
wtnAlarmStatus OBJECT-TYPE Alarm Contact Status. minorAlarm(0) - when active, a minor alarm condition is present criticalAlarm(1) - when active, a critical alarm condition is present. On power up all alarms contacts are open/inactive (0).	1.3.6.1.4.1.5504.3.9.1.2	Bits {minorAlarm(0), criticalAlarm(1)}	read-only	current
radioLinkConfiguration OBJECT-IDENTITY Description.	1.3.6.1.4.1.5504.3.9.2			current
wtnLinkName OBJECT-TYPE Textual description which identifies link. A link is comprised of this and another SkyZhone node at the far end.	1.3.6.1.4.1.5504.3.9.2.1	SnmpAdminString	read-write	current