MIBs Depot

ZHONE-GEN-INTERFACE-CONFIG-MIB

Registered at
1.3.6.1.4.1.5504.3.13.1
Last updated
2010-12-07 17:14
Organization
Organization.
Revisions
2010-12-07 02:37, 2008-02-26 06:25
Namespace
zhone
Source file
ZHONE-GEN-INTERFACE-CONFIG-MIB
Digest
sha256:38f90534db8832fb1ca612c9a36b70db4efcace90c9b4bee826952a0348a2f4d

Description

Description.

Contact

Contact-info.

Imports

FromSymbols
IF-MIBifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue
ZhonezhoneInterfaceConfig, zhoneModules
Zhone-TCZhoneAlarmSeverity, ZhoneRowStatus

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

IANAifType-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
ZHONE-GEN-INTERFACE-CONFIG-MIB
Zhone
Zhone-TC

Objects

NameOIDSyntaxAccessStatus
alarmConfigTable
OBJECT-TYPE
The alarm configuration table
1.3.6.1.4.1.5504.3.13.1.1not-accessiblecurrent
alarmConfigEntry
OBJECT-TYPE
An entry in the alarm configuration table.
1.3.6.1.4.1.5504.3.13.1.1.1not-accessiblecurrent
alarmConfigBitRateThreshold
OBJECT-TYPE
This field describes the enable status of the Bit Rate Threshold Alarm. If this field is true (1) then the Bit Rate Threshold alarm is enabled. If this field is false (2) then the Bit Rate Threshold Alarm is disabled.
1.3.6.1.4.1.5504.3.13.1.1.1.1TruthValueread-createcurrent
alarmConfigBitRateThresholdValue
OBJECT-TYPE
This field indicates the Bit Rate Threshold Value which will generate an alarm if the Bit Rate Threshold Alarm is enabled and the Bit Rate of this ifIndex drops below this value.
1.3.6.1.4.1.5504.3.13.1.1.1.2Integer32read-createcurrent
alarmConfigBitRateThresholdHoldtime
OBJECT-TYPE
This field indicates the Bit Rate Threshold Holdtime in seconds for which the Bit Rate of the ifIndex must remain below the Bit Rate Threshold Value before an alarm will be generated if the Bit Rate Threshold Alarm is enabled.
1.3.6.1.4.1.5504.3.13.1.1.1.3Integer32read-createcurrent
alarmConfigStatusTrap
OBJECT-TYPE
This field describes the enable status of the Status Trap Alarm. If this field is true (1) then the Status Trap alarm is enabled. If this field is false (2) then the Status Trap Alarm is disabled.
1.3.6.1.4.1.5504.3.13.1.1.1.4TruthValueread-createcurrent
alarmConfigAdminUp
OBJECT-TYPE
This field describes the enable status of the Admin Up Alarm. If this field is true (1) then the Admin Up alarm is enabled. If this field is false (2) then the Admin Up Alarm is disabled.
1.3.6.1.4.1.5504.3.13.1.1.1.5TruthValueread-createcurrent
alarmConfigAlarmSeverity
OBJECT-TYPE
This object is used to override Trap, Central Alarm Manager and CLI 'LineAlarm' severity levels for the specified interface.
1.3.6.1.4.1.5504.3.13.1.1.1.6ZhoneAlarmSeverityread-createcurrent
alarmConfigRowStatus
OBJECT-TYPE
This object is used to create, delete or modify a row in this table.
1.3.6.1.4.1.5504.3.13.1.1.1.7ZhoneRowStatusread-createcurrent
alarmConfigTraps
OBJECT-IDENTITY
1.3.6.1.4.1.5504.3.13.1.2
alarmConfigTrapPrefix
OBJECT-IDENTITY
Description.
1.3.6.1.4.1.5504.3.13.1.2.0current

Notifications

NameOIDStatus
zhoneAlarmConfigThresholdTrap
NOTIFICATION-TYPE
This Trap is generated when this ifIndex bandwidth drops below the alarmConfigBitRateThresholdValue for the time specified in alarmConfigBitRateThesholdHoldtime.
1.3.6.1.4.1.5504.3.13.1.2.0.1current
zhoneAlarmConfigThresholdClearTrap
NOTIFICATION-TYPE
This trap is generated when this ifIndex bandwidth goes above the alarmConfigBitRateThresholdValue for the time specified in alarmConfigBitRateThresholdHoldtime.
1.3.6.1.4.1.5504.3.13.1.2.0.2current