ZHNSYSTEM
- Registered at
- 1.3.6.1.4.1.5504.2.5.2
- Last updated
- 2012-07-13 12:00
- Organization
- Zhone Technologies MIB Working Group Other information about group editing the MIB
- Revisions
- 2012-07-13 12:00, 2012-07-06 12:00, 2012-05-18 12:00, 2012-05-16 12:00, 2012-04-12 00:00, 2012-02-03 12:00, 2012-01-19 14:20, 2011-09-09 01:00, 2011-01-05 01:00, 2009-05-20 01:00, 2008-08-25 01:00, 2007-11-26 01:00, 2007-03-15 01:00, 2006-10-17 01:00
- Namespace
- zhone
- Source file
ZHNSYSTEM- Digest
sha256:c41a0ede7508fa6c7ba94532901769a6ae4ed0607c55e072a5530c68d4958866
Description
This file defines the private Enterprise MIB extensions that define system related objects. ============================================================== == == == Copyright (C) 2008-2012 Zhone Technologies, Inc. == == == ==============================================================
Contact
Zhone Technologies, Inc. Florida Design Center 8545 126th Avenue North Largo, FL 33773 www.zhone.com General Comments to: largo-mibwg-team@zhone.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| Zhone | zhoneWtn |
| Zhone-TC | ZhoneRowStatus |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC ZHNSYSTEM Zhone Zhone-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| BasicAddressingTypeValues TEXTUAL-CONVENTION Enumeration of: DHCP - The DNS information is obtained via DHCP Static - The DNS information is manually provisioned | current | |||
| CDA TEXTUAL-CONVENTION Configuration Database Action | current | |||
| CMI TEXTUAL-CONVENTION Clock Mode Items | current | |||
| CSMI TEXTUAL-CONVENTION Pseudo Wire Clock Synchronization Mode Items | current | |||
| ELSUBTYPE TEXTUAL-CONVENTION Ethernet Like Interface Sub-Type | current | |||
| ELTYPE TEXTUAL-CONVENTION Ethernet Like Interface Type | current | |||
| ETCS TEXTUAL-CONVENTION Ethernet Transmit Clock Source Items | current | |||
| IPInterfaceAddressingTypeValues TEXTUAL-CONVENTION The addressing method used to assign the LAN-side IP Address. Enumeration of: Unknown Unconfigured Default DHCP Static PPPoE OMCI | current | |||
| LPT TEXTUAL-CONVENTION Line Power Direction | current | |||
| LTRI TEXTUAL-CONVENTION Local Timing Reference Items | current | |||
| RBT TEXTUAL-CONVENTION Software Reboot Action | current | |||
| SCS TEXTUAL-CONVENTION System Clock Source Items | current | |||
| SEI TEXTUAL-CONVENTION Synchronous Ethernet Items | current | |||
| SysAdminStatus TEXTUAL-CONVENTION Administrative status options for various system services, like syslog and power-shedding. | current | |||
| SysFirmwareAction TEXTUAL-CONVENTION Action to take on the current firmware version. | current | |||
| SysLogLevel TEXTUAL-CONVENTION SysLog logging level options, per RFC 3164. | current | |||
| SysLogMode TEXTUAL-CONVENTION SysLog logging mode of operation. | current | |||
| SysSntpTimeZones TEXTUAL-CONVENTION Simple Network Timing Protocol time zones. | current | |||
| TCSI TEXTUAL-CONVENTION Transmit Clock Source Items | current | |||
| UPT TEXTUAL-CONVENTION Unit Power Supply Type | current | |||
| WFNT TEXTUAL-CONVENTION The Wifi Network Type | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| zhnSystemObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1 | |||
| zhnSystemGeneralObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.1 | |||
| modelNumber OBJECT-TYPE model no. of the device | 1.3.6.1.4.1.5504.2.5.2.1.1.1 | DisplayString | read-only | current |
| macBaseAddress OBJECT-TYPE First MAC Address in series | 1.3.6.1.4.1.5504.2.5.2.1.1.2 | MacAddress | read-only | current |
| numberOfMacAddresses OBJECT-TYPE Number of MAC Address sequentially defined in the Unit starting at the MAC Base Address. | 1.3.6.1.4.1.5504.2.5.2.1.1.3 | Unsigned32 (0..10) | read-only | current |
| wifiNetworkType OBJECT-TYPE Defines the Network Type or Mode of the Unit, i.e. Mesh or Base Station | 1.3.6.1.4.1.5504.2.5.2.1.1.4 | WFNT | read-write | current |
| powerSupplyType OBJECT-TYPE Type of Power Supply that the unit is using | 1.3.6.1.4.1.5504.2.5.2.1.1.5 | UPT | read-only | current |
| locationLatitude OBJECT-TYPE The latitude of the unit's location represented in degrees decimal. The format of the location's latitude is: [+ | -]ddd.dddddddd where + indicates north - indicates south d is a decimal digit (0 <= d <= 9) Valid range is -90 to +90 degrees. | 1.3.6.1.4.1.5504.2.5.2.1.1.6 | DisplayString | read-write | current |
| locationLongitude OBJECT-TYPE The longitude of the unit's location represented in degrees decimal. The format of the location's longitude is: [+ | -]ddd.dddddddd where + indicates east - indicates west d is a decimal digit (0 <= d <= 9) Valid range is -180 to +180 degrees. | 1.3.6.1.4.1.5504.2.5.2.1.1.7 | DisplayString | read-write | current |
| zhnSystemAction OBJECT-TYPE Action parameter to handle the action on other scalars. | 1.3.6.1.4.1.5504.2.5.2.1.1.8 | RowStatus | read-write | current |
| zhnSysLocation OBJECT-TYPE System location. This object is synonomous with the MIB II system sysLocation object. | 1.3.6.1.4.1.5504.2.5.2.1.1.9 | DisplayString | read-write | current |
| zhnSysContact OBJECT-TYPE System contact. This object is synonomous with the MIB II system sysContact object. | 1.3.6.1.4.1.5504.2.5.2.1.1.10 | DisplayString | read-write | current |
| sysTransmitClockSource OBJECT-TYPE T1 Clock source for PWE device. Since both T1/E1 interfaces will be required to have the same source, this object will replace the dsx1TransmitClockSource object in the DS1-MIB. This object is not supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.1.1.11 | TCSI | read-write | current |
| sysLocalTimingReference OBJECT-TYPE Source of the sysTransmitClockSource when set to Local. This object is not supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.1.1.12 | LTRI | read-write | current |
| sysSynchronizationMode OBJECT-TYPE Determines the method of ensuring Service Clock synchronization between the Source and Remote PWE devices. | 1.3.6.1.4.1.5504.2.5.2.1.1.13 | CSMI | read-write | current |
| sysSynchronousEthernet OBJECT-TYPE Determines whether or not to use the 25MHz clock derived from the Synchronous Ethernet Port. This object is not supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.1.1.14 | SEI | read-write | current |
| sysClockMode OBJECT-TYPE Determines the mode for which the PWE chip will be initialized. | 1.3.6.1.4.1.5504.2.5.2.1.1.15 | CMI | read-write | current |
| sysCfgDBAction OBJECT-TYPE Perform an action on the configuration database. | 1.3.6.1.4.1.5504.2.5.2.1.1.16 | CDA | read-write | current |
| sysSoftwareReboot OBJECT-TYPE Perform a software reboot. | 1.3.6.1.4.1.5504.2.5.2.1.1.17 | RBT | read-write | current |
| sysSystemClockSource OBJECT-TYPE Determines the system-level clock mode for ZNID devices. uplink - the system will recover its clock from the configured uplink (e.g. GPON, SPF1, SFP2, etc.). ds1 - the system will recover its clock from the configured sysDs1ClockSourcePort. ieee1588 - the system will recover clock from the on-board 1588 clock circuitry. | 1.3.6.1.4.1.5504.2.5.2.1.1.18 | SCS | read-write | current |
| sysEthernetTransmitClockSource OBJECT-TYPE Determines the transmit clock source for all ethernet ports requiring a clock. internal - all ethernet ports will recover clock from the local oscillator. systemClock - all ethernet ports will recover clock from the sysSystemClockSource. | 1.3.6.1.4.1.5504.2.5.2.1.1.19 | ETCS | read-write | current |
| sysDs1ClockSourcePort OBJECT-TYPE The interface name for the DS1 port providing transmit clock when the sysSystemClockSource is set to ds1. | 1.3.6.1.4.1.5504.2.5.2.1.1.20 | DisplayString | read-write | current |
| sysBootloaderVersion OBJECT-TYPE System bootloader (CFE) firmware version. | 1.3.6.1.4.1.5504.2.5.2.1.1.21 | OCTET STRING (SIZE(1..64)) | read-only | current |
| sysFirmwareVersion OBJECT-TYPE The version of firmware the system is currently running. | 1.3.6.1.4.1.5504.2.5.2.1.1.22 | OCTET STRING (SIZE(1..64)) | read-only | current |
| sysAltFirmwareVersion OBJECT-TYPE The alternate firmware version currently stored in system flash. | 1.3.6.1.4.1.5504.2.5.2.1.1.23 | OCTET STRING (SIZE(1..64)) | read-only | current |
| sysRestoreAltFirmwareVersion OBJECT-TYPE This object can be used to restore the version of firmware to the alternate firmware version currently stored in flash. | 1.3.6.1.4.1.5504.2.5.2.1.1.24 | SysFirmwareAction | read-write | current |
| sysSnmpProvisioningLock OBJECT-TYPE This object can be set by an SNMP client to indicate that system configuration is in progress. All other SNMP clients will be locked out while this is set to true. This lock will timeout after 30 seconds. | 1.3.6.1.4.1.5504.2.5.2.1.1.25 | TruthValue | read-write | current |
| sysSnmpProvisioningChange OBJECT-TYPE This object can be incremented by SNMP clients to indicate a sysCfgDBAction save has taken place. | 1.3.6.1.4.1.5504.2.5.2.1.1.26 | Unsigned32 | read-write | current |
| zhnSystemBoardObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.2 | |||
| numberOfBoards OBJECT-TYPE Number of boards in the Unit with Name, Part Number, Serial Number and Revision Number values | 1.3.6.1.4.1.5504.2.5.2.1.2.1 | Unsigned32 (0..4) | read-only | current |
| boardDescriptorTable OBJECT-TYPE Table of boards: Name, Part Number, Serial Number and Revision Number values | 1.3.6.1.4.1.5504.2.5.2.1.2.2 | not-accessible | current | |
| boardDescriptorEntry OBJECT-TYPE Table of boards: Name, Part Number, Serial Number and Revision Number values | 1.3.6.1.4.1.5504.2.5.2.1.2.2.1 | not-accessible | current | |
| boardIndex OBJECT-TYPE Board Index (Zero relative) | 1.3.6.1.4.1.5504.2.5.2.1.2.2.1.1 | Unsigned32 (0..20) | not-accessible | current |
| boardName OBJECT-TYPE Name of the Board as created by the system | 1.3.6.1.4.1.5504.2.5.2.1.2.2.1.2 | DisplayString | read-only | current |
| boardPartNumber OBJECT-TYPE Part Number of the Board. Read from the board | 1.3.6.1.4.1.5504.2.5.2.1.2.2.1.3 | DisplayString | read-only | current |
| boardSerialNumber OBJECT-TYPE Serial Number of the Board. Read from the board | 1.3.6.1.4.1.5504.2.5.2.1.2.2.1.4 | DisplayString | read-only | current |
| boardRevision OBJECT-TYPE Revision Number of the Board. Read from the board | 1.3.6.1.4.1.5504.2.5.2.1.2.2.1.5 | DisplayString | read-only | current |
| zhnSystemPldObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.3 | |||
| numberOfPlds OBJECT-TYPE Number of PLDs in the Unit with Name and Version Number values | 1.3.6.1.4.1.5504.2.5.2.1.3.1 | Unsigned32 (0..20) | read-only | current |
| pldDescriptorTable OBJECT-TYPE Table of boards: Name, Part Number, Serial Number and Revision Number values | 1.3.6.1.4.1.5504.2.5.2.1.3.2 | not-accessible | current | |
| pldDescriptorEntry OBJECT-TYPE Table of boards: Name, Part Number, Serial Number and Revision Number values | 1.3.6.1.4.1.5504.2.5.2.1.3.2.1 | not-accessible | current | |
| pldIndex OBJECT-TYPE PLD Index (Zero relative) | 1.3.6.1.4.1.5504.2.5.2.1.3.2.1.1 | Unsigned32 (0..20) | not-accessible | current |
| pldName OBJECT-TYPE Name of the PLD as created by the system | 1.3.6.1.4.1.5504.2.5.2.1.3.2.1.2 | DisplayString | read-only | current |
| pldVersion OBJECT-TYPE PLD Software Version. Read from the PLD | 1.3.6.1.4.1.5504.2.5.2.1.3.2.1.3 | DisplayString | read-only | current |
| zhnSystemRadioObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.4 | |||
| numberOfRadios OBJECT-TYPE Number of Radios in the Unit | 1.3.6.1.4.1.5504.2.5.2.1.4.1 | Unsigned32 (0..20) | read-only | current |
| zhnSystemEthernetLikeObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.5 | |||
| numberOfEthernetLikeInterfaces OBJECT-TYPE Number of Ethernet Like Interfaces with Name, Type and Subtype | 1.3.6.1.4.1.5504.2.5.2.1.5.1 | Unsigned32 (0..20) | read-write | current |
| ethernetlikeInterfaceTable OBJECT-TYPE Table of ethernet-like Interfaces | 1.3.6.1.4.1.5504.2.5.2.1.5.2 | not-accessible | current | |
| ethernetlikeInterfaceEntry OBJECT-TYPE Table of ethernet-like interfaces having Name, type, subtype, number of ports, line power and number of pairs with power | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1 | not-accessible | current | |
| etherIndex OBJECT-TYPE Index of the Ethernet Like Interface (zero relative) | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.1 | Unsigned32 (0..20) | not-accessible | current |
| etherName OBJECT-TYPE Name of the ethernet Like Interface as created by the system | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.2 | DisplayString | read-only | current |
| etherType OBJECT-TYPE Type of Ethernet interface | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.3 | ELTYPE | read-only | current |
| etherSubtype OBJECT-TYPE Subtype of Ethernet interface | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.4 | ELSUBTYPE | read-only | current |
| etherNumberOfPorts OBJECT-TYPE Number of Ports on the Ethernet interface | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.5 | Unsigned32 (0..400) | read-only | current |
| etherLinePower OBJECT-TYPE Line Power Type on this Ethernet Interface | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.6 | LPT | read-only | current |
| etherPowerPairs OBJECT-TYPE Number of line Pairs providing power on the Ethernet interface | 1.3.6.1.4.1.5504.2.5.2.1.5.2.1.7 | Integer32 | read-only | current |
| zhnSystemTempSensorObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.6 | |||
| numberOfTemperatureSensors OBJECT-TYPE Number of Temperature Sensors in the Unit | 1.3.6.1.4.1.5504.2.5.2.1.6.1 | Unsigned32 (0..20) | read-only | current |
| temperatureSensorTable OBJECT-TYPE Table of Temperature Sensors: Name, Maximum, and Minimum values | 1.3.6.1.4.1.5504.2.5.2.1.6.2 | not-accessible | current | |
| temperatureSensorEntry OBJECT-TYPE Table of Temperature Sensors: Name, Maximum, and Minimum values | 1.3.6.1.4.1.5504.2.5.2.1.6.2.1 | not-accessible | current | |
| temperatureSensorIndex OBJECT-TYPE Temperature Sensor Index (Zero relative) | 1.3.6.1.4.1.5504.2.5.2.1.6.2.1.1 | Unsigned32 (0..20) | not-accessible | current |
| temperatureSensorName OBJECT-TYPE Name of the ethernet Like Interface as created by the system | 1.3.6.1.4.1.5504.2.5.2.1.6.2.1.2 | DisplayString | read-only | current |
| temperatureSensorMaximum OBJECT-TYPE Maximum Temperature Recorded | 1.3.6.1.4.1.5504.2.5.2.1.6.2.1.3 | DisplayString | read-only | current |
| temperatureSensorMinimum OBJECT-TYPE Minimum Temperature Recorded | 1.3.6.1.4.1.5504.2.5.2.1.6.2.1.4 | DisplayString | read-only | current |
| zhnSystemSNMPObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.7 | |||
| numberOfCommunities OBJECT-TYPE Number of SNMP Communities configured in the Unit | 1.3.6.1.4.1.5504.2.5.2.1.7.1 | Unsigned32 (0..9999) | read-only | current |
| zhnCommunityTable OBJECT-TYPE This table is used to set the various configuration parameters for a particular community. | 1.3.6.1.4.1.5504.2.5.2.1.7.2 | not-accessible | current | |
| zhnCommunityTableEntry OBJECT-TYPE This object corresponds to an entry in the community table. | 1.3.6.1.4.1.5504.2.5.2.1.7.2.1 | not-accessible | current | |
| communityName OBJECT-TYPE This object corresponds to the SNMP community string. | 1.3.6.1.4.1.5504.2.5.2.1.7.2.1.1 | DisplayString | not-accessible | current |
| communityType OBJECT-TYPE The access type of the community string. The default value of this object should be read-only(1). | 1.3.6.1.4.1.5504.2.5.2.1.7.2.1.2 | INTEGER {readOnly(1), readWrite(2)} | read-write | current |
| communityRowStatus OBJECT-TYPE When written, this object can be used to createAndGo(4) or destroy(6) a row from the table. A rowStatus value of notInService(2) will also destroy a row. RowStatus values of active(1), notReady(3), and createAndWait(5) are ignored. | 1.3.6.1.4.1.5504.2.5.2.1.7.2.1.3 | RowStatus | read-create | current |
| zhnFixedCommunityTable OBJECT-TYPE This table is used to configure a read-only and a read-write community. | 1.3.6.1.4.1.5504.2.5.2.1.7.3 | not-accessible | current | |
| zhnFixedCommunityTableEntry OBJECT-TYPE This object corresponds to an entry in the fixed community table. | 1.3.6.1.4.1.5504.2.5.2.1.7.3.1 | not-accessible | current | |
| fixedCommunityName OBJECT-TYPE This object corresponds to the SNMP community string. | 1.3.6.1.4.1.5504.2.5.2.1.7.3.1.1 | DisplayString | read-create | current |
| fixedCommunityType OBJECT-TYPE The access type of the community string. The default value of this object should be read-only(1). | 1.3.6.1.4.1.5504.2.5.2.1.7.3.1.2 | INTEGER {readOnly(1), readWrite(2)} | read-create | current |
| fixedCommunityRowStatus OBJECT-TYPE When written, this object is ignored. When read, a value of active(1) or notReady(3) will be returned. | 1.3.6.1.4.1.5504.2.5.2.1.7.3.1.3 | RowStatus | read-create | current |
| zhnSystemTrapObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.8 | |||
| numberOfTrapManagers OBJECT-TYPE Number of Trap Managers configured in the Unit | 1.3.6.1.4.1.5504.2.5.2.1.8.1 | Unsigned32 (0..9999) | read-only | current |
| zhnDefaultTrapCommunity OBJECT-TYPE This object corresponds to the default trap community string. The default trap community string will be used when a community name is not configured for a particular trap manager. | 1.3.6.1.4.1.5504.2.5.2.1.8.2 | DisplayString | read-write | current |
| zhnTrapTypeLinkUpDown OBJECT-TYPE Enable or disable all link up/down traps. | 1.3.6.1.4.1.5504.2.5.2.1.8.3 | INTEGER {enable(1), disable(2)} | read-write | current |
| zhnTrapTypeAuthFailure OBJECT-TYPE Enable or disable the generation of authorization failure traps. | 1.3.6.1.4.1.5504.2.5.2.1.8.4 | INTEGER {enable(1), disable(2)} | read-write | current |
| zhnTrapTypeConfigChange OBJECT-TYPE Enable or disable the generation of configuration change traps. This object is not supported by ZNID devices. Rather, the only mechanism to disable the generation of configuration change traps in a ZNID device is to disable the generation of all enterprise traps via the zhnTrapTypeEnterpise object. | 1.3.6.1.4.1.5504.2.5.2.1.8.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| zhnTrapManagerInfoTable OBJECT-TYPE This table is used to set the trap destination address for a particular community. | 1.3.6.1.4.1.5504.2.5.2.1.8.6 | not-accessible | current | |
| zhnTrapManagerInfoTableEntry OBJECT-TYPE This object corresponds to an entry in the community trap address info table. | 1.3.6.1.4.1.5504.2.5.2.1.8.6.1 | not-accessible | current | |
| trapDestination OBJECT-TYPE The IP Address of the destination to which a trap must be sent. | 1.3.6.1.4.1.5504.2.5.2.1.8.6.1.1 | IpAddress | not-accessible | current |
| trapCommunityName OBJECT-TYPE This object corresponds to the trap community string. If not specified, the trapCommunityName will be set to the zhnDefaultTrapCommunity object. | 1.3.6.1.4.1.5504.2.5.2.1.8.6.1.2 | DisplayString | read-write | current |
| trapVersion OBJECT-TYPE The trap types automatically supported by net-snmp and enabled/disabled in snmpd.conf. If not specified, the trapVersion will be set the default value of v2c. | 1.3.6.1.4.1.5504.2.5.2.1.8.6.1.3 | INTEGER {v1(1), v2c(2)} | read-write | current |
| trapPort OBJECT-TYPE The udp/tcp port number to which a trap must be sent. If not specified, the trapPort will be set the default value of 162. | 1.3.6.1.4.1.5504.2.5.2.1.8.6.1.4 | INTEGER (1..65536) | read-write | current |
| trapRowStatus OBJECT-TYPE When written, this object can be used to createAndGo(4) or destroy(6) a row from the table. A rowStatus value of notInService(2) will also destroy a row. RowStatus values of active(1), notReady(3), and createAndWait(5) are ignored. | 1.3.6.1.4.1.5504.2.5.2.1.8.6.1.5 | RowStatus | read-create | current |
| zhnTrapTypeColdStart OBJECT-TYPE Enable or disable the generation of coldstart traps. A coldstart trap is generated each time the device is restarted. | 1.3.6.1.4.1.5504.2.5.2.1.8.7 | INTEGER {enable(1), disable(2)} | read-write | current |
| zhnTrapTypeWarmStart OBJECT-TYPE Enable or disable the generation of warmstart traps. A warmstart trap is generated each time the device's SNMP agent is restarted. | 1.3.6.1.4.1.5504.2.5.2.1.8.8 | INTEGER {enable(1), disable(2)} | read-write | current |
| zhnTrapTypeEnterprise OBJECT-TYPE Enable or disable the generation of all enterprise traps. | 1.3.6.1.4.1.5504.2.5.2.1.8.9 | INTEGER {enable(1), disable(2)} | read-write | current |
| zhnSystemSyslogObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.9 | |||
| sysLogAdminStatus OBJECT-TYPE Enable or disable the Syslog service. | 1.3.6.1.4.1.5504.2.5.2.1.9.1 | SysAdminStatus | read-write | current |
| sysLogLocalLogLevel OBJECT-TYPE SysLog local log level options, per RFC 3164. All logged events with a severity at or greater than this level will be logged to the local log file. Note, the local log file is not persistent across system reboots. | 1.3.6.1.4.1.5504.2.5.2.1.9.2 | SysLogLevel | read-write | current |
| sysLogRemoteLogLevel OBJECT-TYPE SysLog remote log level options, per RFC 3164. All logged events with a severity at or greater that this level will be sent to a remote Syslog server if the remote server address is configured and a route exists to the remote server. | 1.3.6.1.4.1.5504.2.5.2.1.9.3 | SysLogLevel | read-write | current |
| sysLogDisplayLogLevel OBJECT-TYPE SysLog log level options, per RFC 3164 for the display of log messages via a web browser. All logged events with a severity level at or greater than this level will be displayed. | 1.3.6.1.4.1.5504.2.5.2.1.9.4 | SysLogLevel | read-write | current |
| sysLogMode OBJECT-TYPE SysLog logging mode of operation: local(1), -- Log messages only to the local, non-persistent log file remote(2), -- Log messages only to a remote syslog server both(3), -- Log messages to both a local log file and a remote syslog server | 1.3.6.1.4.1.5504.2.5.2.1.9.5 | SysLogMode | read-write | current |
| sysLogRemoteServerAddress OBJECT-TYPE The IP address of the remote syslog server. | 1.3.6.1.4.1.5504.2.5.2.1.9.6 | IpAddress | read-write | current |
| sysLogRemoteServerPort OBJECT-TYPE The UDP port to use to transfer syslog messages to the remote syslog server. | 1.3.6.1.4.1.5504.2.5.2.1.9.7 | Unsigned32 (1..65535) | read-write | current |
| zhnSystemSNTPObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.10 | |||
| sntpAdminStatus OBJECT-TYPE Enable or disable the SNTP client. | 1.3.6.1.4.1.5504.2.5.2.1.10.1 | SysAdminStatus | read-write | current |
| sntpOperStatus OBJECT-TYPE Current operational status of the SNTP client. | 1.3.6.1.4.1.5504.2.5.2.1.10.2 | SysAdminStatus | read-write | current |
| sntpServer1 OBJECT-TYPE The domain name or IP address of the first SNTP server with which to synchronize the system time. | 1.3.6.1.4.1.5504.2.5.2.1.10.3 | OCTET STRING (SIZE(0..64)) | read-write | current |
| sntpServer2 OBJECT-TYPE The domain name or IP address of the second SNTP server with which to synchronize the system time. | 1.3.6.1.4.1.5504.2.5.2.1.10.4 | OCTET STRING (SIZE(0..64)) | read-write | current |
| sntpServer3 OBJECT-TYPE The domain name or IP address of the third SNTP server with which to synchronize the system time. | 1.3.6.1.4.1.5504.2.5.2.1.10.5 | OCTET STRING (SIZE(0..64)) | read-write | current |
| sntpServer4 OBJECT-TYPE The domain name or IP address of the fourth SNTP server with which to synchronize the system time. | 1.3.6.1.4.1.5504.2.5.2.1.10.6 | OCTET STRING (SIZE(0..64)) | read-write | current |
| sntpServer5 OBJECT-TYPE The domain name or IP address of the fifth SNTP server with which to synchronize the system time. | 1.3.6.1.4.1.5504.2.5.2.1.10.7 | OCTET STRING (SIZE(0..64)) | read-write | current |
| sntpLocalTimeZone OBJECT-TYPE Indicates the local time zone. | 1.3.6.1.4.1.5504.2.5.2.1.10.8 | SysSntpTimeZones | read-write | current |
| sntpCurrentDateAndTime OBJECT-TYPE Indicates the current date and time. | 1.3.6.1.4.1.5504.2.5.2.1.10.9 | DisplayString | read-write | current |
| zhnSystemUserLoginObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.11 | |||
| adminUserName OBJECT-TYPE The username required to login as the system administrator. This user has unrestricted access to change and view all configuration, status and test parameters. | 1.3.6.1.4.1.5504.2.5.2.1.11.1 | OCTET STRING (SIZE(0..16)) | read-only | current |
| adminPassword OBJECT-TYPE The password required to login as the system administrator. This field cannot contain a SPACE and is returned as a string of asterisks. | 1.3.6.1.4.1.5504.2.5.2.1.11.2 | OCTET STRING (SIZE(0..16)) | read-write | current |
| supportUserName OBJECT-TYPE The username required to login to support the system. This user has access to system parameters required to maintain the system and run diagnostic tests. | 1.3.6.1.4.1.5504.2.5.2.1.11.3 | OCTET STRING (SIZE(0..16)) | read-only | current |
| supportPassword OBJECT-TYPE The password required to login to support the system. This field cannot contain a SPACE and is returned as a string of asterisks. | 1.3.6.1.4.1.5504.2.5.2.1.11.4 | OCTET STRING (SIZE(0..16)) | read-write | current |
| userUserName OBJECT-TYPE The username required to login as a general user of the system. This user can view configuration settings and statistics, as well as, update the system's software. | 1.3.6.1.4.1.5504.2.5.2.1.11.5 | OCTET STRING (SIZE(0..16)) | read-only | current |
| userPassword OBJECT-TYPE The password required to login as a general user of the system. field cannot contain a SPACE and is returned as a string of asterisks. | 1.3.6.1.4.1.5504.2.5.2.1.11.6 | OCTET STRING (SIZE(0..16)) | read-write | current |
| zhnSystemPowerSheddingObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.12 | |||
| powerSheddingAdminStatus OBJECT-TYPE Configuration of parameters for the power-shedding feature. The power-shedding objects are only supported by systems that include on-board power-management circuitry. When the system detects that it is running on battery power, it has the option to shut down all support (excluding the voice over IP telephone service).The power-shedding administrative state will enable or disable the power-shedding feature. | 1.3.6.1.4.1.5504.2.5.2.1.12.1 | SysAdminStatus | read-only | current |
| powerSheddingShutdownDelay OBJECT-TYPE The shutdown delay is the time delay, in minutes, after AC power is lost, before shutting down non-voice services. | 1.3.6.1.4.1.5504.2.5.2.1.12.2 | Unsigned32 (1..60) | read-only | current |
| powerSheddingRestoreDelay OBJECT-TYPE The restore delay is the time delay, in minutes, after AC power is restored before switching on the services that were shut down due to the power loss. | 1.3.6.1.4.1.5504.2.5.2.1.12.3 | Unsigned32 (0..10) | read-only | current |
| zhnSystemFirewallObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.13 | |||
| sysFirewallEnable OBJECT-TYPE Enables or disables the firewall feature for the entire system. | 1.3.6.1.4.1.5504.2.5.2.1.13.1 | TruthValue | read-write | current |
| sysFirewallTcpSynCookies OBJECT-TYPE Enables or disables the TCP SYNCookie protection against SYN flooding denial-of-service attack. | 1.3.6.1.4.1.5504.2.5.2.1.13.2 | TruthValue | read-only | current |
| zhnSystemDNSClientObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.14 | |||
| sysDNSAddressingType OBJECT-TYPE Type of IP interface addressing method used to reach the DNS. | 1.3.6.1.4.1.5504.2.5.2.1.14.1 | IPInterfaceAddressingTypeValues | read-write | current |
| sysDNSDHCPSource OBJECT-TYPE Name of the interface used by the DHCP Client to obtain DNS information. | 1.3.6.1.4.1.5504.2.5.2.1.14.2 | OCTET STRING (SIZE(0..16)) | read-write | current |
| sysDNSPrimaryIPAddress OBJECT-TYPE Primary Address of DNS when the addressing type is set to Static. | 1.3.6.1.4.1.5504.2.5.2.1.14.3 | IpAddress | read-write | current |
| sysDNSSecondaryIPAddress OBJECT-TYPE Secondary Address of DNS when the addressing type is set to Static. | 1.3.6.1.4.1.5504.2.5.2.1.14.4 | IpAddress | read-write | current |
| zhnSystemDNSProxyObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.15 | |||
| zhnDnsProxyHostMaxHostEntries OBJECT-TYPE The maximum number of host entries in the DnsProxyHostObjectTable. | 1.3.6.1.4.1.5504.2.5.2.1.15.1 | Unsigned32 (0..24) | read-write | current |
| zhnDnsProxyHostTable OBJECT-TYPE This table is used to configure a DNS Proxy Host entry. | 1.3.6.1.4.1.5504.2.5.2.1.15.2 | not-accessible | current | |
| zhnDnsProxyHostEntry OBJECT-TYPE This object corresponds to an entry in the DNS Proxy Host table. | 1.3.6.1.4.1.5504.2.5.2.1.15.2.1 | not-accessible | current | |
| dnsProxyHostIndex OBJECT-TYPE Index into the DNS Proxy Host table | 1.3.6.1.4.1.5504.2.5.2.1.15.2.1.1 | Unsigned32 (1..24) | not-accessible | current |
| dnsProxyHostIPAddress OBJECT-TYPE The local proxy host IP address. | 1.3.6.1.4.1.5504.2.5.2.1.15.2.1.2 | IpAddress | read-write | current |
| dnsProxyHostName OBJECT-TYPE The domain name assigned to the host IP address. | 1.3.6.1.4.1.5504.2.5.2.1.15.2.1.3 | OCTET STRING | read-write | current |
| dnsProxyRowStatus OBJECT-TYPE Create or destroy a DNS Proxy Host. Upon creation, the dnsProxyHostIPAddress must be provided. | 1.3.6.1.4.1.5504.2.5.2.1.15.2.1.4 | ZhoneRowStatus | read-create | current |
| zhnSystemWanBackupObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.16 | |||
| failoverTimer OBJECT-TYPE The WAN Failover Timer is used to determine how long (in seconds) the Fiber uplink interface must be operationally DOWN before a USB Cellular WAN Backup connection will be initiated. The Default value is 0 seconds, which DISABLES this feature. The recommended value to enable this feature is 60 seconds. | 1.3.6.1.4.1.5504.2.5.2.1.16.1 | Unsigned32 | read-write | current |
| restoralTimer OBJECT-TYPE The WAN Restoral Timer is used to determine how long (in seconds) the Fiber uplink interface must remain in an operational UP condition before the Cellular Backup connection will be terminated and the traffic that was being forwarded out the USB interface is forwarded to the 5xx GEM instead. The default value is 60 seconds. | 1.3.6.1.4.1.5504.2.5.2.1.16.2 | Unsigned32 | read-write | current |
| backupDataVlan OBJECT-TYPE This is the Internet Access VLAN (GEM 5xx), which is the only service that can be backed up using the USB Cellular modem. | 1.3.6.1.4.1.5504.2.5.2.1.16.3 | Unsigned32 (0..4096) | read-write | current |
| cellularPinNumber OBJECT-TYPE A 4 digit PIN code used to unlock the SIM card. For GPRS/UMTS networks, *99# is typically used. For CDMA/EVDO networks, #777 is typically used. | 1.3.6.1.4.1.5504.2.5.2.1.16.4 | OCTET STRING (SIZE(0..4)) | read-write | current |
| cellularDataNumber OBJECT-TYPE This is the number that the USB modem will dial to establish a cellular a cellular data connection. For GPRS/UMTS networks, *99# is typically used. For CDMA/EVDO networks, #777 is typically used. | 1.3.6.1.4.1.5504.2.5.2.1.16.5 | OCTET STRING (SIZE(0..32)) | read-write | current |
| atInitCommands OBJECT-TYPE AT initialization command strings, if needed. | 1.3.6.1.4.1.5504.2.5.2.1.16.6 | OCTET STRING (SIZE(0..256)) | read-write | current |
| accessPointName OBJECT-TYPE The Access Point Name (APN) for connections to the GPRS/UMTS network. This should be provided by the ISP. In North America, 3G cellular carriers do not require an APN. | 1.3.6.1.4.1.5504.2.5.2.1.16.7 | OCTET STRING (SIZE(0..32)) | read-write | current |
| chapPapUsername OBJECT-TYPE Required for CHAP or PAP authentication. This configuration item should be left blank if CHAP or PAP is not used. | 1.3.6.1.4.1.5504.2.5.2.1.16.8 | OCTET STRING (SIZE(0..32)) | read-write | current |
| chapPapPassword OBJECT-TYPE Required for CHAP or PAP authentication. This configuration item should be left blank if CHAP or PAP is not used. | 1.3.6.1.4.1.5504.2.5.2.1.16.9 | OCTET STRING (SIZE(0..32)) | read-write | current |
| connectionTimeout OBJECT-TYPE Specifies the duration of inactivity in seconds before the cellular data call will automatically terminate. A new call will be initiated automatically when a packet must be sent upstream on the designated VLAN if the WAN uplink is still Operationally Down. A value of 0 will DISABLE the Connection Timeout feature. | 1.3.6.1.4.1.5504.2.5.2.1.16.10 | Unsigned32 | read-write | current |
| backupIpAddressMode OBJECT-TYPE The WAN IP Address, Default Gateway IP Address, Subnet Mask and DNS Server IP Address must all be defined for the USB Cellular Backup connection. When IP Address Mode is set to DHCP, a DHCP Request will be sent upstream after the Cellular Data Connection has been established to acquire this information dynamically. When the WAN Backup IP Addess Mode is set to Static, this information ust be statically configured. | 1.3.6.1.4.1.5504.2.5.2.1.16.11 | BasicAddressingTypeValues | read-write | current |
| backupIpAddress OBJECT-TYPE The IP Address to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIpAddressMode is Static. | 1.3.6.1.4.1.5504.2.5.2.1.16.12 | IpAddress | read-write | current |
| backupDefaultGateway OBJECT-TYPE The IP Address of the Default Gateway to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIpAddressMode is Static. | 1.3.6.1.4.1.5504.2.5.2.1.16.13 | IpAddress | read-write | current |
| backupSubnetMask OBJECT-TYPE The Subnet Mask to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIpAddressMode is Static. | 1.3.6.1.4.1.5504.2.5.2.1.16.14 | IpAddress | read-write | current |
| backupPrimaryDns OBJECT-TYPE The IP Address of the Primary DNS Server to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIpAddressMode is Static. | 1.3.6.1.4.1.5504.2.5.2.1.16.15 | IpAddress | read-write | current |
| backupSecondaryDns OBJECT-TYPE The IP Address of the Secondary DNS Server to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIpAddressMode is Static. | 1.3.6.1.4.1.5504.2.5.2.1.16.16 | IpAddress | read-write | current |
| zhnSystemTr69cObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.17 | |||
| sysTr69cConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.17.1 | |||
| sysTr69cConfigLoggingSOAP OBJECT-TYPE Enable or disable showing SOAP messages on serial console and local TR69 Client log file. | 1.3.6.1.4.1.5504.2.5.2.1.17.1.1 | TruthValue | read-write | current |
| sysTr69cConfigConnectionRequestAuthentication OBJECT-TYPE Enable or disable connection request authentication. | 1.3.6.1.4.1.5504.2.5.2.1.17.1.2 | TruthValue | read-write | current |
| sysTr69cServerObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.1.17.2 | |||
| sysTr69cServerURL OBJECT-TYPE URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter MUST be in the form of a valid HTTP or HTTPS URL. The host portion of this URL is used by the CPE for server-side certificate authentication when using SSL or TLS. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.1 | OCTET STRING (SIZE(0..256)) | read-write | current |
| sysTr69cServerLastConnectedURL OBJECT-TYPE This value records the last URL which connected successfully to the TR69 client. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.2 | OCTET STRING (SIZE(0..256)) | read-only | current |
| sysTr69cServerUsername OBJECT-TYPE Username used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This username is used only for HTTP-based authentication of the CPE. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.3 | OCTET STRING (SIZE(0..256)) | read-write | current |
| sysTr69cServerPassword OBJECT-TYPE Password used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This username is used only for HTTP-based authentication of the CPE. When read by an ACS, this parameter returns an empty string, regardless of the value. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.4 | OCTET STRING (SIZE(0..256)) | read-write | current |
| sysTr69cServerPeriodicInformEnable OBJECT-TYPE When set to TRUE, the CPE will periodically send CPE information to the TR69 Server using the Inform method calls. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.5 | TruthValue | read-write | current |
| sysTr69cServerPeriodicInformInterval OBJECT-TYPE The duration in seconds of the interval for which the CPE MUST attempt to connect with the ACS and call the Inform method if PeriodicInform-Enable is true. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.6 | Unsigned32 | read-write | current |
| sysTr69cServerParameterKey OBJECT-TYPE ParameterKey provides the ACS a reliable and extensible means to track changes made by the ACS. The value of ParameterKey MUST be equal to the value of the ParameterKey argument from the most recent successful SetParameterValues, AddObject, or DeleteObject method call from the ACS. The CPE MUST set ParameterKey to the value specified in the corresponding method arguments if and only if the method completes successfully and no fault response is generated. If a method call does not complete successfully implying that the changes requested in the method did not take effect, the value of ParameterKey MUST NOT be modified. The CPE MUST only modify the value of ParameterKey as a result of SetParameterValues, AddObject, DeleteObject, or due to a factory reset. On factory reset, the value of ParameterKey MUST be set to empty. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.7 | OCTET STRING (SIZE(0..32)) | read-only | current |
| sysTr69cServerBoundIfName OBJECT-TYPE Name of the WAN interface that the TR69 client should use when establishing communications with the ACS. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.8 | OCTET STRING (SIZE(0..32)) | read-write | current |
| sysTr69cServerConnectionRequestURL OBJECT-TYPE HTTP URL for an ACS to make a Connection Request notification to the CPE. In the form: http://host:port/path. The host portion of the URL MAY be the IP address for the management interface of the CPE in lieu of a host name. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.9 | OCTET STRING (SIZE(0..256)) | read-only | current |
| sysTr69cServerConnectionRequestUsername OBJECT-TYPE Username used to authenticate an ACS making a Connection Request to the CPE. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.10 | OCTET STRING (SIZE(0..256)) | read-write | current |
| sysTr69cServerConnectionRequestPassword OBJECT-TYPE Password used to authenticate an ACS making a Connection Request to the CPE. When read by an ACS, this parameter returns an empty string, regardless of the actual value. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.11 | OCTET STRING (SIZE(0..256)) | read-write | current |
| sysTr69cServerUpgradesManaged OBJECT-TYPE Indicates whether or not the ACS will manage upgrades for the CPE. If true (1), the CPE SHOULD not use other means other than the ACS to seek out available upgrades. If false (0), the CPE MAY use other means for this purpose. | 1.3.6.1.4.1.5504.2.5.2.1.17.2.12 | TruthValue | read-write | current |
| zhnSystemConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.2 | |||
| zhnSystemGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.2.1 | |||
| zhnSystemCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.2.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| zhnSystemActiveGroup OBJECT-GROUP A collection of System Information objects that are required for the device to be functional | 1.3.6.1.4.1.5504.2.5.2.2.1.1 | current |
| zhnSystemTablesItems OBJECT-GROUP The table items for the device that are filled in when the table is present | 1.3.6.1.4.1.5504.2.5.2.2.1.2 | current |
| zhnSystemConfigItems OBJECT-GROUP The collection of configurable scalar system objects. | 1.3.6.1.4.1.5504.2.5.2.2.1.3 | current |
| zhnSystemTrapItems OBJECT-GROUP The collection of SNMP trap objects. | 1.3.6.1.4.1.5504.2.5.2.2.1.4 | current |
| zhnSystemCommunityItems OBJECT-GROUP The collection of SNMP community objects. | 1.3.6.1.4.1.5504.2.5.2.2.1.5 | current |
| zhnSystemFixedCommunityItems OBJECT-GROUP The collection of pre-provisioned SNMP community objects. | 1.3.6.1.4.1.5504.2.5.2.2.1.6 | current |
| zhnSystemClockingItems OBJECT-GROUP The collection of system-wide clocking parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.7 | current |
| zhnSyslogConfigGroup OBJECT-GROUP The collection of system-wide logging parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.8 | current |
| zhnSntpConfigGroup OBJECT-GROUP The collection of SNTP server parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.9 | current |
| zhnUserLoginGroup OBJECT-GROUP The collection of User login parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.10 | current |
| zhnPowerSheddingGroup OBJECT-GROUP The collection of configurable power-shedding parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.11 | current |
| zhnSystemFirewallGroup OBJECT-GROUP The collection of system firewall parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.12 | current |
| zhnSystemDNSClientGroup OBJECT-GROUP The collection of system DNS Client parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.13 | current |
| zhnSystemDNSProxyHostGroup OBJECT-GROUP The collection of system DNS Proxy Host parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.14 | current |
| zhnSystemWanBackupGroup OBJECT-GROUP The collection of system WAN Backup parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.15 | current |
| zhnSystemTr69cGroup OBJECT-GROUP The collection of system TR69 Client parameters only supported by ZNID devices. | 1.3.6.1.4.1.5504.2.5.2.2.1.16 | current |
| zhnSystemCompliance MODULE-COMPLIANCE The Compliance statement for SNMP entities which manage the display of Zhone System Information | 1.3.6.1.4.1.5504.2.5.2.2.2.1 | current |