ZHNLANDEVICE
- Registered at
- 1.3.6.1.4.1.5504.2.5.41
- Last updated
- 2012-06-13 12:00
- Organization
- Zhone Technologies, Inc.
- Revisions
- 2012-06-13 12:00, 2012-05-10 12:00, 2012-04-11 02:11, 2012-01-27 12:00, 2011-01-11 00:00, 2010-07-21 00:00, 2010-04-01 00:00
- Namespace
- zhone
- Source file
ZHNLANDEVICE- Digest
sha256:411b9ed933cd103d758d66083bcedbbc47485ef33ce4e8bcd921197a1acf047c
Description
This file defines the private Enterprise MIB extensions that define LAN ethernet interface related objects supported by the Zhone CPEs.
Contact
Zhone Technologies, Inc. Florida Design Center 8545 126th Avenue North Largo, FL 33773 Toll-Free: +1 877-ZHONE20 (+1 877-946-6320) Tel: +1-510-777-7000 Fax: +1-510-777-7001 E-mail: support@zhone.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Gauge32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| ZHNLAYER2BRIDGING | VlanTypeValues |
| Zhone | zhoneWtn |
| Zhone-TC | ZhoneRowStatus |
Imported by
1 module(s) in this corpus import this one.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANAifType-MIB IF-MIB SNMPv2-CONF SNMPv2-MIB SNMPv2-SMI SNMPv2-TC ZHNLANDEVICE ZHNLAYER2BRIDGING Zhone Zhone-TC
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| DNSTypeValues TEXTUAL-CONVENTION Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNS information is manually provisioned DHCP - The DNS information is obtained via DHCP | current | |||
| IGMPSnoopingModeValues TEXTUAL-CONVENTION Enumeration of: Standard Blocking | current | |||
| IPInterfaceAddressingTypeValues TEXTUAL-CONVENTION The addressing method used to assign the LAN-side IP Address. Enumeration of: Unknown Unconfigured Default DHCP Static PPPoE | current | |||
| IpPppoeConnectionTypeValues TEXTUAL-CONVENTION Enumeration of: IP_Routed IP_Bridged PPPoE_IP_Routed PPPoE_IP_Bridged Unconfigured | current | |||
| LANEthernetAclValues TEXTUAL-CONVENTION The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported | current | |||
| LANEthernetDuplexModeValues TEXTUAL-CONVENTION The duplex mode available to this connection. Enumeration of: Half Full Auto | current | |||
| LANEthernetIpProtocolValues TEXTUAL-CONVENTION The access list IP protocol values with which to filter. Enumeration of: tcp(1) udp(2) icmp(3) igmp(4) any(5) | current | |||
| LANEthernetMaxBitRateValues TEXTUAL-CONVENTION The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto | current | |||
| LANEthernetPauseModeValues TEXTUAL-CONVENTION The pause mode available to this connection. Enumeration of: Auto Enable Disable | current | |||
| LANEthernetStatusValues TEXTUAL-CONVENTION Ethernet LAN interface status. An enumeration of: Up NoLink Error Disabled | current | |||
| LANRateLimitBurstSizeValues TEXTUAL-CONVENTION Enumeration of: 16KB 20KB 28KB 40KB 76KB 140KB 268KB 500KB | current | |||
| LANRateLimitDirectionValues TEXTUAL-CONVENTION Enumeration of: Inbound Outbound Both-Directions | current | |||
| PPPAuthenticationProtocolValues TEXTUAL-CONVENTION Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP | current | |||
| PPPCompressionProtocolValues TEXTUAL-CONVENTION Enumeration of: None VanJacobsen STAC-LZS | current | |||
| PPPEncryptionProtocolValues TEXTUAL-CONVENTION Enumeration of: None MPPE | current | |||
| PPPUserConnectionRequestValues TEXTUAL-CONVENTION Enumeration of: None Down Up Connect Disconnect | current | |||
| WANPppConnectionStatusValues TEXTUAL-CONVENTION Enumeration of: Unconfigured Connecting Authenticating Connected PendingDisconnect Disconnecting Disconnected | current | |||
| WANPppLastConnectionErrorValues TEXTUAL-CONVENTION Enumeration of: ERROR_NONE ERROR_ISP_TIME_OUT ERROR_COMMAND_ABORTED ERROR_NOT_ENABLED_FOR_INTERNET ERROR_BAD_PHONE_NUMBER ERROR_USER_DISCONNECT ERROR_ISP_DISCONNECT ERROR_IDLE_DISCONNECT ERROR_FORCED_DISCONNECT ERROR_SERVER_OUT_OF_RESOURCES ERROR_RESTRICTED_LOGON_HOURS ERROR_ACCOUNT_DISABLED ERROR_ACCOUNT_EXPIRED ERROR_PASSWORD_EXPIRED ERROR_AUTHENTICATION_FAILURE ERROR_NO_DIALTONE ERROR_NO_CARRIER ERROR_NO_ANSWER ERROR_LINE_BUSY ERROR_UNSUPPORTED_BITSPERSECOND ERROR_TOO_MANY_LINE_ERRORS ERROR_IP_CONFIGURATION ERROR_UNKNOWN | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| zhnLANDeviceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1 | |||
| lanDeviceTable OBJECT-TYPE Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces | 1.3.6.1.4.1.5504.2.5.41.1.1 | not-accessible | current | |
| lanDeviceEntry OBJECT-TYPE Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces. Each instance contains all LAN-related objects for a given bridged subnet. | 1.3.6.1.4.1.5504.2.5.41.1.1.1 | not-accessible | current | |
| lanDeviceIndex OBJECT-TYPE LAN Device ifIndex | 1.3.6.1.4.1.5504.2.5.41.1.1.1.1 | Unsigned32 | not-accessible | current |
| lanEthernetInterfaceNumberOfEntries OBJECT-TYPE Number of instances of lanEthernetInterfaceConfig entries for this LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.1.1.2 | Unsigned32 | read-only | current |
| lanUSBInterfaceNumberOfEntries OBJECT-TYPE Number of instances of lanUSBInterfaceConfig entries for this LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.1.1.3 | Unsigned32 | read-only | current |
| lanWLANConfigurationNumberOfEntries OBJECT-TYPE Number of instances of lanWLANInterfaceConfig entries for this LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.1.1.4 | Unsigned32 | read-only | current |
| lanMocaInterfaceNumberOfEntries OBJECT-TYPE Number of instances of lanMocaInterfaceConfig entries for this LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.1.1.5 | Unsigned32 | read-only | current |
| igmpSnoopingCfgTable OBJECT-TYPE Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces | 1.3.6.1.4.1.5504.2.5.41.1.2 | not-accessible | current | |
| igmpSnoopingCfgEntry OBJECT-TYPE Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces. | 1.3.6.1.4.1.5504.2.5.41.1.2.1 | not-accessible | current | |
| igmpEnable OBJECT-TYPE Enables or disables IGMP snooping for the LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.2.1.1 | TruthValue | read-write | current |
| igmpMode OBJECT-TYPE IGMP Snooping mode. Enumeration of: Standard Blocking | 1.3.6.1.4.1.5504.2.5.41.1.2.1.2 | IGMPSnoopingModeValues | read-write | current |
| igmpIfName OBJECT-TYPE The interface name for this LAN device. This object has the same value as the ipInterfaceifName object in the ipInterfaceTable and is included within the IGMP table for convenience purposes. | 1.3.6.1.4.1.5504.2.5.41.1.2.1.3 | OCTET STRING | read-only | current |
| lanHostConfigManagementObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.3 | |||
| lanHostConfigManagementTable OBJECT-TYPE Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces | 1.3.6.1.4.1.5504.2.5.41.1.3.1 | not-accessible | current | |
| lanHostConfigManagementEntry OBJECT-TYPE Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1 | not-accessible | current | |
| dhcpServerConfigurable OBJECT-TYPE Enables the configuration of the DHCP server on the LAN interface If this variable is set to false, the CPE should restore its default DHCP server settings. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.1 | TruthValue | read-write | current |
| zhnDhcpServerEnable OBJECT-TYPE Enables or disables the DHCP server on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.2 | TruthValue | read-write | current |
| dhcpRelay OBJECT-TYPE Indicates if the DHCP server performs the role of a server or a relay on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.3 | TruthValue | read-only | current |
| dhcpRelayServer OBJECT-TYPE DHCP Relay Server IP Address. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.4 | IpAddress | read-write | current |
| minAddress OBJECT-TYPE Specifies first address in the pool to be assigned by the DHCP server on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.5 | IpAddress | read-write | current |
| maxAddress OBJECT-TYPE Specifies last address in the pool to be assigned by the DHCP server on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.6 | IpAddress | read-write | current |
| reservedAddresses OBJECT-TYPE Comma separated list of addresses marked reserved from the address allocation pool. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.7 | OCTET STRING | read-write | current |
| subnetMask OBJECT-TYPE DHCP client subnet mask | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.8 | IpAddress | read-write | current |
| dnsServers OBJECT-TYPE Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.9 | OCTET STRING | read-write | current |
| domainName OBJECT-TYPE Sets the domain name to provide to clients on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.10 | OCTET STRING | read-write | current |
| ipRouters OBJECT-TYPE Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.11 | OCTET STRING | read-write | current |
| dhcpLeaseTime OBJECT-TYPE Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.12 | INTEGER (-1..2147483647) | read-write | current |
| ipInterfaceNumberOfEntries OBJECT-TYPE Number of IP interface at LAN side of the CPE. 1 is a typical value for CPE not supporting Multihomed interfaces. Support for more than one interface instance is Optional. | 1.3.6.1.4.1.5504.2.5.41.1.3.1.1.13 | Unsigned32 | read-only | current |
| ipInterfaceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.3.2 | |||
| zhnIpInterfaceTable OBJECT-TYPE IP interface table. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1 | not-accessible | current | |
| zhnIpInterfaceEntry OBJECT-TYPE IP interface table. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1 | not-accessible | current | |
| ipInterfaceIndex OBJECT-TYPE LAN IP Address Index | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1 | Unsigned32 | not-accessible | current |
| ipInterfaceEnable OBJECT-TYPE Enables or disables this entry. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2 | TruthValue | read-only | current |
| ipInterfaceIPAddress OBJECT-TYPE IP address of the LAN-side interface of the CPE. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3 | IpAddress | read-write | current |
| ipInterfaceSubnetMask OBJECT-TYPE Subnet mask of the LAN-side interface of the CPE. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4 | IpAddress | read-write | current |
| ipInterfaceAddressingType OBJECT-TYPE Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5 | IPInterfaceAddressingTypeValues | read-write | current |
| ipInterfaceifName OBJECT-TYPE The interface name for this LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6 | OCTET STRING | read-only | current |
| firewallEnabled OBJECT-TYPE Indicates if a stateful firewall is enabled for all traffic from this IP interface to the modem. If TRUE, all inbound local traffic (from LAN to modem) that is not responding to an outbound packet or listed in the firewall exception table will be blocked. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7 | TruthValue | read-write | current |
| defaultGateway OBJECT-TYPE The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8 | IpAddress | read-write | current |
| natEnabled OBJECT-TYPE This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9 | TruthValue | read-write | current |
| dhcpcPid OBJECT-TYPE If the address type is DHCP, then we will start a DHCP client to get the IP address for this IP interface. The process ID (pid) is stored in this field. A pid of 0 indicates that no dhcpc is running. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10 | Unsigned32 | read-only | current |
| dnsType OBJECT-TYPE This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchangeably. Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNSinformation is manually provisioned DHCP - The DNS information is obtained via DHCP | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11 | DNSTypeValues | read-write | current |
| primaryDnsIPAddress OBJECT-TYPE The DNS server primary IP address. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12 | IpAddress | read-write | current |
| secondaryDnsIPAddress OBJECT-TYPE The DNS server secondary IP address. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13 | IpAddress | read-write | current |
| zhnVlanType OBJECT-TYPE This object specifies the VLAN connection type of the interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14 | VlanTypeValues | read-write | current |
| connectionType OBJECT-TYPE This object specifies the connection type of the interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15 | IpPppoeConnectionTypeValues | read-write | current |
| maxMTUSize OBJECT-TYPE The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stack. The default MTU size is 1500 bytes. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16 | Unsigned32 (1..1540) | read-write | current |
| alternateWanIfName OBJECT-TYPE Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17 | OCTET STRING | read-write | current |
| naptEnabled OBJECT-TYPE This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18 | TruthValue | read-write | current |
| pppoeConfigObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2 | |||
| pppoeConfigTable OBJECT-TYPE PPPoE configuration interface table for LAN interfaces. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1 | not-accessible | current | |
| pppoeConfigEntry OBJECT-TYPE PPPoE configuration table entry. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1 | not-accessible | current | |
| pppoeIfName OBJECT-TYPE The interface name for this LAN device. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.1 | OCTET STRING | read-only | current |
| pid OBJECT-TYPE This object holds the process id (pid) of the pppd associated with this connection. A pid of 0 indicates that there is no pppd running. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.2 | Unsigned32 | read-only | current |
| connectionRequest OBJECT-TYPE This object is used to bring up or down a PPPoE connection. Enumeration of: None Down Up Connect Disconnect | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.3 | PPPUserConnectionRequestValues | read-write | current |
| username OBJECT-TYPE PPP requires that you have a user name and password to establish your connection. This object is the login user name to be used for PPP authentication. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4 | OCTET STRING | read-write | current |
| password OBJECT-TYPE PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When read, this parameter returns an empty string, regardless of the actual value. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5 | OCTET STRING | read-write | current |
| authentication OBJECT-TYPE This object is the PPP authentication protocol to be used for PPP authentication. Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.6 | PPPAuthenticationProtocolValues | read-write | current |
| serviceName OBJECT-TYPE This object is the PPP Service Name. It should be filled only if specified by the provider. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.7 | OCTET STRING | read-write | current |
| encryptionProtocol OBJECT-TYPE This object describes the PPP encryption protocol. Enumeration of: None MPPE | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.8 | PPPEncryptionProtocolValues | read-write | current |
| compressionProtocol OBJECT-TYPE This object describes the PPP compression protocol used between the WAN device and the ISP POP. Enumeration of: None VanJacobsen STAC-LZS | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.9 | PPPCompressionProtocolValues | read-write | current |
| idleDisconnectTime OBJECT-TYPE The time in seconds that if the connection remains idle, the CPE automatically terminates the connection. A value of 0 (zero) indicates that the connection is not to be shutdown automatically. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.10 | Unsigned32 | read-write | current |
| holdOffTime OBJECT-TYPE Set time in seconds before retrying connection. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.11 | Unsigned32 | read-write | current |
| useStaticIpAddress OBJECT-TYPE If TRUE, PPPoE connection will use a static IP address. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.12 | TruthValue | read-write | current |
| staticIpAddress OBJECT-TYPE PPPoE static IP address. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.13 | IpAddress | read-write | current |
| enableDebug OBJECT-TYPE Enable PPPoE debug. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.14 | TruthValue | read-write | current |
| pppoeStatusObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3 | |||
| pppoeStatusTable OBJECT-TYPE PPPoE configuration interface table for LAN interfaces. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1 | not-accessible | current | |
| pppoeStatusEntry OBJECT-TYPE PPPoE status table entry. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1 | not-accessible | current | |
| connectionStatus OBJECT-TYPE Current status of the PPP connection. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.1 | WANPppConnectionStatusValues | read-only | current |
| lastConnectionError OBJECT-TYPE The failure reason of the last PPP connection setup. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.2 | WANPppLastConnectionErrorValues | read-only | current |
| connectionEstablishedTime OBJECT-TYPE The last time the PPP connection was established. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.3 | Unsigned32 | read-only | current |
| currentMTUSize OBJECT-TYPE The current MTU in use over this connection. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.4 | Unsigned32 | read-only | current |
| uptime OBJECT-TYPE The time in seconds this connection has been up. | 1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.5 | Unsigned32 | read-only | current |
| zhnDhcpConditionalServingPoolObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.3.3 | |||
| zhnDhcpConditionalServingPoolTable OBJECT-TYPE A collection of configuration parameters for DHCP conditional serving. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1 | not-accessible | current | |
| zhnDhcpConditionalServingPoolEntry OBJECT-TYPE DHCP Conditional Serving Pool table. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1 | not-accessible | current | |
| dhcpPoolIndex OBJECT-TYPE DHCP pool index | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.1 | Unsigned32 | not-accessible | current |
| dhcpPoolEnable OBJECT-TYPE Enables or disables this entry. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.2 | TruthValue | read-only | current |
| dhcpPoolChaddr OBJECT-TYPE MAC address of the physical interface of the DHCP client. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.3 | MacAddress | read-write | current |
| dhcpPoolChaddrMask OBJECT-TYPE Chaddr is only to be done for bit positions set to one in the mask. A mask of FF:FF:FF:FF:FF:FF indicates all bits of the Chaddr are to be used for classification. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.4 | MacAddress | read-write | current |
| dhcpPoolMinAddress OBJECT-TYPE Specifies first address in the pool to be assigned by the DHCP server on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.5 | IpAddress | read-write | current |
| dhcpPoolMaxAddress OBJECT-TYPE Specifies last address in the pool to be assigned by the DHCP server on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.6 | IpAddress | read-write | current |
| dhcpPoolReservedAddresses OBJECT-TYPE Comma separated list of addresses marked reserved from the address allocation pool. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.7 | OCTET STRING | read-write | current |
| dhcpPoolSubnetMask OBJECT-TYPE Specifies the clients network subnet mask. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.8 | IpAddress | read-write | current |
| dhcpPoolDnsServers OBJECT-TYPE Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.9 | OCTET STRING | read-write | current |
| dhcpPoolDomainName OBJECT-TYPE Sets the domain name to provide to clients on the LAN interface. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.10 | OCTET STRING | read-write | current |
| dhcpPoolIPRouters OBJECT-TYPE Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.11 | OCTET STRING | read-write | current |
| dhcpPoolLeaseTime OBJECT-TYPE Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.12 | INTEGER (-1..2147483647) | read-write | current |
| dhcpPoolUseWanVlan OBJECT-TYPE The WAN VLAN is used to determine the default gateway router for upstream packets that have a source IP address in this subnet. A zero value indicates that the WAN VLAN is not used. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.13 | Unsigned32 (0..4096) | read-write | current |
| dhcpPoolEnableStaticLease OBJECT-TYPE Enable this option to permanently bind the IP address to the client MAC. | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.14 | TruthValue | read-write | current |
| dhcpPoolRowStatus OBJECT-TYPE The SNMP RowStatus of the current row. The following object must be specified upon row creation: dhcpPoolChaddr | 1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.15 | ZhoneRowStatus | read-write | current |
| zhnLANEthernetInterfaceObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.4 | |||
| lanEthernetInterfaceConfigTable OBJECT-TYPE Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side. | 1.3.6.1.4.1.5504.2.5.41.1.4.1 | not-accessible | current | |
| lanEthernetInterfaceConfigEntry OBJECT-TYPE Table entry for LAN ethernet interface configuration objects. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1 | not-accessible | current | |
| lanEthernetIndex OBJECT-TYPE LAN Ethernet Interface Index | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.1 | Unsigned32 | not-accessible | current |
| lanEthernetEnable OBJECT-TYPE Enables or disables this interface. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.2 | TruthValue | read-write | current |
| lanEthernetStatus OBJECT-TYPE Indicates the status of this interface. Enumeration of: Up NoLink Error Disabled | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.3 | LANEthernetStatusValues | read-only | current |
| macAddress OBJECT-TYPE ASCII representation of the physical address of the interface | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.4 | OCTET STRING | read-only | current |
| macAddressControlEnabled OBJECT-TYPE Indicates whether MAC Address Control is enabled or not on this interface. MAC Address Control limits the clients that connect to those that match a list of allowed MAC addresses specified in InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.AllowedMACAddresses. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.5 | TruthValue | read-only | current |
| maxBitRate OBJECT-TYPE The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.6 | LANEthernetMaxBitRateValues | read-write | current |
| duplexMode OBJECT-TYPE The duplex mode available to this connection. Enumeration of: Half Full Auto | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.7 | LANEthernetDuplexModeValues | read-write | current |
| zhnIfName OBJECT-TYPE Ethernet interface name such as eth0, eth1. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.8 | OCTET STRING | read-only | current |
| zhnEthernetPriorityMark OBJECT-TYPE 802.1P priority value for this ethernet interface. Assigment of priority values is done via the Layer 2 Bridge Marking Table. Therefore, this object is read-only. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.9 | Unsigned32 | read-only | current |
| dot1qPvid OBJECT-TYPE Default 802.1Q VLAN ID for this ethernet interface. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.10 | Unsigned32 | read-write | current |
| lanEthernetAlias OBJECT-TYPE A descriptive name for this ethernet interface. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.11 | OCTET STRING | read-only | current |
| pauseMode OBJECT-TYPE The pause mode available to this connection. Enumeration of: Auto Enable Disable | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.12 | LANEthernetPauseModeValues | read-write | current |
| lanEthernetAcl OBJECT-TYPE The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.13 | LANEthernetAclValues | read-write | current |
| lanEthernetAclRulesNumberofEntries OBJECT-TYPE The number of entries in the access list table for this ethernet interface. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.14 | Unsigned32 | read-only | current |
| lanEthernetLanFollowsWan OBJECT-TYPE Enable or disable this LAN interface based upon the WAN status. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.15 | TruthValue | read-write | current |
| lanEthernetIgmpPriorityMark OBJECT-TYPE The 802.1P priority value that this LAN interface will assign to ingress untagged IGMP frames. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.16 | Unsigned32 | read-write | current |
| lanEthernetIgmpPvid OBJECT-TYPE The VLAN ID that this LAN interface will assign to ingress untagged IGMP frames. | 1.3.6.1.4.1.5504.2.5.41.1.4.1.1.17 | Unsigned32 | read-write | current |
| lanEthIntfStatisticsTable OBJECT-TYPE Table of LAN ethernet interface statistics objects. This object contains statistics for an Ethernet LAN connection on a CPE device. | 1.3.6.1.4.1.5504.2.5.41.1.4.2 | not-accessible | current | |
| lanEthIntfStatisticsEntry OBJECT-TYPE Table entry for LAN ethernet interface statistics objects. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1 | not-accessible | current | |
| bytesSent OBJECT-TYPE Total number of bytes sent over the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.1 | Gauge32 | read-only | current |
| bytesReceived OBJECT-TYPE Total number of bytes received over the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.2 | Gauge32 | read-only | current |
| packetsSent OBJECT-TYPE Total number of packets sent over the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.3 | Gauge32 | read-only | current |
| packetsReceived OBJECT-TYPE Total number of packets received over the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.4 | Gauge32 | read-only | current |
| txErrors OBJECT-TYPE Total number of transmit errors on the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.5 | Gauge32 | read-only | current |
| rxErrors OBJECT-TYPE Total number of receive errors on the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.6 | Gauge32 | read-only | current |
| txDrops OBJECT-TYPE Total number of packets dropped on the transmit side of the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.7 | Gauge32 | read-only | current |
| rxDrops OBJECT-TYPE Total number of packets dropped on the receive side of the interface since the CPE was last reset. | 1.3.6.1.4.1.5504.2.5.41.1.4.2.1.8 | Gauge32 | read-only | current |
| lanEthIntfStatusTable OBJECT-TYPE Table of LAN ethernet interface status objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side. | 1.3.6.1.4.1.5504.2.5.41.1.4.3 | not-accessible | current | |
| lanEthIntfStatusEntry OBJECT-TYPE Table entry for LAN ethernet interface status objects. | 1.3.6.1.4.1.5504.2.5.41.1.4.3.1 | not-accessible | current | |
| linkStatus OBJECT-TYPE The port's current link status. | 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.1 | LANEthernetStatusValues | read-only | current |
| rateStatus OBJECT-TYPE The port's current maximum bit rate. | 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.2 | LANEthernetMaxBitRateValues | read-only | current |
| duplexStatus OBJECT-TYPE The port's current duplex mode. | 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.3 | LANEthernetDuplexModeValues | read-only | current |
| pauseStatus OBJECT-TYPE The port's current pause mode. | 1.3.6.1.4.1.5504.2.5.41.1.4.3.1.4 | LANEthernetPauseModeValues | read-only | current |
| lanEthIntfRateLimitTable OBJECT-TYPE Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side. | 1.3.6.1.4.1.5504.2.5.41.1.4.4 | not-accessible | current | |
| lanEthIntfRateLimitEntry OBJECT-TYPE Rate limit table entry for LAN ethernet interface configuration objects. | 1.3.6.1.4.1.5504.2.5.41.1.4.4.1 | not-accessible | current | |
| rateLimitEnable OBJECT-TYPE This object is used to enable or disable rate limit on a port. Setting it to True will rate limit traffic on the port to a specified peak rate. | 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.1 | TruthValue | read-write | current |
| peakRate OBJECT-TYPE This object identifies the maximum rate (0-1000) in Mbps on a port. If Rate Limit is disabled, this object has no effect. | 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.2 | Unsigned32 | read-write | current |
| burstSize OBJECT-TYPE This object burst size. If Rate Limit is disabled, this object has no effect. | 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.3 | LANRateLimitBurstSizeValues | read-write | current |
| rateDirection OBJECT-TYPE This object specifies the traffic direction to which the rate limit applies. The supported values are inbound, outbound or both. If the Rate Limit is disabled, this object has no effect. | 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.4 | LANRateLimitDirectionValues | read-write | current |
| inboundPeakRate OBJECT-TYPE This object identifies the maximum rate (0-1000) in Mbps on a port for inbound data. If Rate Limit is disabled, this object has no effect. | 1.3.6.1.4.1.5504.2.5.41.1.4.4.1.5 | Unsigned32 | read-write | current |
| igmpGroupsTable OBJECT-TYPE Table of IGMP Multicast Groups currently detected by IGMP snooping. | 1.3.6.1.4.1.5504.2.5.41.1.5 | not-accessible | current | |
| igmpGroupsEntry OBJECT-TYPE IGMP Multicast Groups table. | 1.3.6.1.4.1.5504.2.5.41.1.5.1 | not-accessible | current | |
| igmpGroupIndex OBJECT-TYPE IGMP Multicast Groups Table Index | 1.3.6.1.4.1.5504.2.5.41.1.5.1.1 | Unsigned32 | not-accessible | current |
| igmpGroupAddress OBJECT-TYPE This object identifies the IP address of the multicast group. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.2 | IpAddress | read-only | current |
| igmpGroupReporterIP OBJECT-TYPE This object identifies the IP address of the host in the multicast group. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.3 | IpAddress | read-only | current |
| igmpGroupReporterMAC OBJECT-TYPE This object identifies the MAC address of the host in the multicast group. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.4 | OCTET STRING | read-only | current |
| igmpGroupInterface OBJECT-TYPE This object identifies the interface that discovered the multicast group. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.5 | OCTET STRING | read-only | current |
| igmpGroupVlan OBJECT-TYPE This object identifies the VLAN that discovered the multicast group. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.6 | OCTET STRING | read-only | current |
| igmpGroupExpiration OBJECT-TYPE This object identifies the time (in seconds) before the multicast group times out. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.7 | Unsigned32 | read-only | current |
| igmpGroupQuerier OBJECT-TYPE This object identifies the IP address to be used by a proxy querier. | 1.3.6.1.4.1.5504.2.5.41.1.5.1.8 | IpAddress | read-only | current |
| zhnLANDeviceSystemObjects OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.1.6 | |||
| lanDefaultIfName OBJECT-TYPE Configure the default interface name. | 1.3.6.1.4.1.5504.2.5.41.1.6.1 | OCTET STRING | read-write | current |
| lanDefaultIfIpAddress OBJECT-TYPE The IP address of the default interface, as configured by IPInterfaceIPAddress. | 1.3.6.1.4.1.5504.2.5.41.1.6.2 | IpAddress | read-only | current |
| lanEthAclRulesTable OBJECT-TYPE Table of LAN ethernet access list rules. This table contains a list of all access rules used to filter incoming traffic for a single physical ethernet interface. | 1.3.6.1.4.1.5504.2.5.41.1.7 | not-accessible | current | |
| lanEthAclRulesEntry OBJECT-TYPE Table entry for LAN ethernet access list objects. | 1.3.6.1.4.1.5504.2.5.41.1.7.1 | not-accessible | current | |
| lanAclRuleKey OBJECT-TYPE Index for the Ethernet Access List table. | 1.3.6.1.4.1.5504.2.5.41.1.7.1.1 | Unsigned32 | not-accessible | current |
| lanAclRuleIfName OBJECT-TYPE Identify the interface name. | 1.3.6.1.4.1.5504.2.5.41.1.7.1.2 | OCTET STRING | read-only | current |
| lanAclRuleName OBJECT-TYPE The user defined identifier for the rule. When creating a new rule, this field must be provided and must be unique per interface rule. | 1.3.6.1.4.1.5504.2.5.41.1.7.1.3 | OCTET STRING | read-write | current |
| lanAclRuleSourceIPAddress OBJECT-TYPE The Source IP address to filter. The address may include a subnet prefix length in CIDR notation. Therefore the format would be 192.168.2.0/24. This is a ASCII representation of the IP address | 1.3.6.1.4.1.5504.2.5.41.1.7.1.4 | OCTET STRING | read-write | current |
| lanAclRuleIPProtocol OBJECT-TYPE The IPv4 Protocol to filter. | 1.3.6.1.4.1.5504.2.5.41.1.7.1.5 | LANEthernetIpProtocolValues | read-write | current |
| lanAclRuleSourceMACAddress OBJECT-TYPE The Source MAC Address to filter. ASCII representation of the physical address of the interface | 1.3.6.1.4.1.5504.2.5.41.1.7.1.6 | OCTET STRING | read-write | current |
| lanAclRuleSourceMACMask OBJECT-TYPE Mask by which to filter MAC address. For example a MAC Mask of ff:ff:ff:00:00:00 would filter against the first six digits of the MAC address. ASCII representation of the MAC Mask | 1.3.6.1.4.1.5504.2.5.41.1.7.1.7 | OCTET STRING | read-write | current |
| lanAclRuleRowStatus OBJECT-TYPE The SNMP RowStatus of the current row. The following object must be specified upon row creation: lanAclRuleName | 1.3.6.1.4.1.5504.2.5.41.1.7.1.8 | ZhoneRowStatus | read-write | current |
| zhnLANDeviceConformance OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.2 | |||
| zhnLANDeviceGroups OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.2.1 | |||
| zhnLANDeviceCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.5504.2.5.41.2.2 |
Conformance
| Name | OID | Status |
|---|---|---|
| zhnLANDeviceGroup OBJECT-GROUP A collection of Zhone LAN Device objects that describe the LAN interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.1 | current |
| zhnLANIgmpSnoopingGroup OBJECT-GROUP A collection of Zhone LAN Device objects that describe the IGMP snooping capabilities of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.2 | current |
| zhnLANHostConfigManagementGroup OBJECT-GROUP A collection of Zhone LAN Host Configuration Management objects that describe the LAN IP addressing of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.3 | current |
| zhnIpInterfaceGroup OBJECT-GROUP A collection of Zhone LAN IP Address objects that describe the IP connectivity of interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.4 | current |
| zhnPPPoEConfigGroup OBJECT-GROUP A collection of Zhone LAN PPPoE objects that describe the configuration of PPPoE connections for interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.5 | current |
| zhnPPPoEStatusGroup OBJECT-GROUP A collection of Zhone LAN PPPoE objects that describe the status of PPPoE connections for interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.6 | current |
| zhnLANEthernetInterfaceConfigGroup OBJECT-GROUP A collection of Zhone LAN Ethernet objects that describe the ethernet-like interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.7 | current |
| zhnLANEthIntfStatisticsGroup OBJECT-GROUP A collection of Zhone LAN Ethernet objects that convey statistical information for the ethernet-like interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.8 | current |
| zhnLANEthIntfStatusGroup OBJECT-GROUP A collection of Zhone LAN Ethernet objects that convey the status of the ethernet-like interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.9 | current |
| zhnLANEthIntfRateLimitGroup OBJECT-GROUP A collection of Zhone LAN Ethernet objects that convey the rate-limit information of the ethernet-like interfaces of the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.10 | current |
| zhnLANIGMPMulticastGroup OBJECT-GROUP A collection of Zhone LAN IGMP objects that identify the multicast groups currently detected by IGMP snooping within the device. | 1.3.6.1.4.1.5504.2.5.41.2.1.11 | current |
| zhnLANSystemGroup OBJECT-GROUP A collection of Zhone LAN System-wide scalar objects that identify the system default interface. | 1.3.6.1.4.1.5504.2.5.41.2.1.12 | current |
| zhnLANAclRulesGroup OBJECT-GROUP A collection of Zhone LAN Ethernet interface access-list rules with which to filter incoming traffic. | 1.3.6.1.4.1.5504.2.5.41.2.1.13 | current |
| zhnDhcpConditionalServingPoolGroup OBJECT-GROUP A collection of configuration parameters for DHCP conditional serving. | 1.3.6.1.4.1.5504.2.5.41.2.1.14 | current |
| zhnLANDeviceCompliance MODULE-COMPLIANCE The Compliance statement for SNMP entities which manage the Zhone CPE LAN Device Information | 1.3.6.1.4.1.5504.2.5.41.2.2.1 | current |