MIBs Depot

XXX-MIB

Registered at
1.3.6.1.4.1.34592.1.1.1
1.3.6.1.4.1.34592.1.1.2
Last updated
2009-03-05 00:00
Organization
CData
Revisions
2009-03-05 00:00
Namespace
cdata
Source file
XXX-MIB
Digest
sha256:f9a125b368cda1dfbea951a8986e0db5bcf10dddad834cb442092376c92687a6

Description

Media Converter NMS SNMP mib file

Contact

www.cdatatec.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
XXX-MIB

Objects

NameOIDSyntaxAccessStatus
ipProduct
OBJECT-IDENTITY
IP product line
1.3.6.1.4.1.34592.1current
height2HU
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1
systemMIB
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1
shelfNum
OBJECT-TYPE
The number of shelf in current system
1.3.6.1.4.1.34592.1.1.1.1INTEGER (1..4)read-onlycurrent
shelfTable
OBJECT-TYPE
Shelf table
1.3.6.1.4.1.34592.1.1.1.2not-accessiblecurrent
shelfEntry
OBJECT-TYPE
Shelf entry definition
1.3.6.1.4.1.34592.1.1.1.2.1not-accessiblecurrent
shelfName
OBJECT-TYPE
Shelf name
1.3.6.1.4.1.34592.1.1.1.2.1.1INTEGER {master(1), slave_1(2), slave_2(3), slave_3(4)}read-onlycurrent
psuA
OBJECT-TYPE
The status fan A of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.2INTEGER {on(1), off(2), nc(3)}read-onlycurrent
psuB
OBJECT-TYPE
The status psu B of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.3INTEGER {on(1), off(2), nc(3)}read-onlycurrent
volA
OBJECT-TYPE
The voltage status of psuA of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.4INTEGER {normal(1), abnormal(2), nc(3)}read-onlycurrent
volB
OBJECT-TYPE
The voltage status of psuB of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.5INTEGER {normal(1), abnormal(2), nc(3)}read-onlycurrent
fan
OBJECT-TYPE
The status fan A of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.6INTEGER {on(1), off(2), nc(3)}read-onlycurrent
temperature
OBJECT-TYPE
The temperature status of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.7INTEGERread-onlycurrent
coCardNum
OBJECT-TYPE
The number of center card inserting of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.8INTEGER (0..16)read-onlycurrent
rmtCardNum
OBJECT-TYPE
The number of remote card inserting of current shelf
1.3.6.1.4.1.34592.1.1.1.2.1.9INTEGER (0..16)read-onlycurrent
slotObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.3
slotTable
OBJECT-TYPE
Sparse table containing one entry for each slot in exist chassis in the system, indexed by shelfIdx and slotIdx.
1.3.6.1.4.1.34592.1.1.1.3.1not-accessiblecurrent
slotEntry
OBJECT-TYPE
in this table ,user can find the converter module's type inserted in the system's slot.then you can get the detail information about the specified type in the cardObjects table
1.3.6.1.4.1.34592.1.1.1.3.1.1not-accessiblecurrent
shelfIdx
OBJECT-TYPE
Chassis index - 1 = master management module, 2-4 = slave management module
1.3.6.1.4.1.34592.1.1.1.3.1.1.1INTEGER {master(1), slave_1(2), slave_2(3), slave_3(4)}read-onlycurrent
slotIdx
OBJECT-TYPE
chassis's slot,whitch is a index in this table
1.3.6.1.4.1.34592.1.1.1.3.1.1.2INTEGER {slot01(1), slot02(2), slot03(3), slot04(4), slot05(5), slot06(6), slot07(7), slot08(8), slot09(9), slot10(10), slot11(11), slot12(12), slot13(13), slot14(14), slot15(15), slot16(16), slot17(17)}read-onlycurrent
coCardType
OBJECT-TYPE
local card's type inserted in the chassis
1.3.6.1.4.1.34592.1.1.1.3.1.1.3INTEGER {no_card(0), ip113s(1), ip113f(2), mc_1g_e2o(3), mc_1g_o2o(4), fr600f-mm(100), fr600f-ms(101), not-support(102)}read-onlycurrent
coCardDesc
OBJECT-TYPE
local card's description
1.3.6.1.4.1.34592.1.1.1.3.1.1.4DisplayStringread-writecurrent
rmtCardType
OBJECT-TYPE
remote card's type connect with the local converter
1.3.6.1.4.1.34592.1.1.1.3.1.1.5INTEGER {no_card(0), ip113sr(1), ip113f(2), mc_1g_e2o(3), mc_1g_o2o(4), fr600f-mm(100), fr600f-ms(101), not-support(102)}read-onlycurrent
rmtCardDesc
OBJECT-TYPE
remote card's description
1.3.6.1.4.1.34592.1.1.1.3.1.1.6DisplayStringread-writecurrent
cardObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4
nmuObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.1
nmuConfig
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.1.1
nmuType
OBJECT-TYPE
The type of NMU (network management unit)
1.3.6.1.4.1.34592.1.1.1.4.1.1.1INTEGER {fr600f-mm(100), fr600f-ms(101), not-support(102)}read-onlycurrent
ipaddr
OBJECT-TYPE
The ethernet IP address of NMU (network management unit)
1.3.6.1.4.1.34592.1.1.1.4.1.1.2IpAddressread-onlycurrent
subnet
OBJECT-TYPE
The etherent mask address of NMU (network management unit)
1.3.6.1.4.1.34592.1.1.1.4.1.1.3IpAddressread-onlycurrent
gateway
OBJECT-TYPE
The ethernet gateway address of NMU (network management unit)
1.3.6.1.4.1.34592.1.1.1.4.1.1.4IpAddressread-onlycurrent
sysContact
OBJECT-TYPE
Mirror of the system.sysContact.0
1.3.6.1.4.1.34592.1.1.1.4.1.1.5DisplayStringread-writecurrent
sysName
OBJECT-TYPE
Mirror of the system.sysName.0
1.3.6.1.4.1.34592.1.1.1.4.1.1.6DisplayStringread-writecurrent
sysLocation
OBJECT-TYPE
Mirror of the system.sysLocation.0
1.3.6.1.4.1.34592.1.1.1.4.1.1.7DisplayStringread-writecurrent
trapHost1
OBJECT-TYPE
The first host's IP address used to receive trap messages, when set 0 it simply delete this entry. This applies to the trap host 2~4 below as well.
1.3.6.1.4.1.34592.1.1.1.4.1.1.8IpAddressread-writecurrent
trapHost2
OBJECT-TYPE
The second host's IP address used to receive trap messages
1.3.6.1.4.1.34592.1.1.1.4.1.1.9IpAddressread-writecurrent
trapHost3
OBJECT-TYPE
The third host's IP address used to receive trap messages
1.3.6.1.4.1.34592.1.1.1.4.1.1.10IpAddressread-writecurrent
trapHost4
OBJECT-TYPE
The fourth host's IP address used to receive trap messages
1.3.6.1.4.1.34592.1.1.1.4.1.1.11IpAddressread-writecurrent
mcCmObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.2
mcCmTable
OBJECT-TYPE
MC Configuration table
1.3.6.1.4.1.34592.1.1.1.4.2.1not-accessiblecurrent
mcCmEntry
OBJECT-TYPE
MC Configuration entry definition
1.3.6.1.4.1.34592.1.1.1.4.2.1.1not-accessiblecurrent
mcShelfIdx
OBJECT-TYPE
Shelf index
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.1INTEGER {master(1), slave1(2), slave2(3), slave3(4)}read-onlycurrent
mcCardIdx
OBJECT-TYPE
Card index
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.2INTEGER {card01(1), card02(2), card03(3), card04(4), card05(5), card06(6), card07(7), card08(8), card09(9), card10(10), card11(11), card12(12), card13(13), card14(14), card15(15), card16(16)}read-onlycurrent
mcType
OBJECT-TYPE
Center card's type
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.3INTEGER {ip113s(1), ip113f(2), mc_1g_e2o(3), mc_1g_o2o(4), not-support(5)}read-onlycurrent
mcTransceiverMode
OBJECT-TYPE
Center card's optical transceiver mode. 100M card support bidi/duplex_fiber; 1G card support bidi/duplex_fiber/sfp. Once sfp is given, the following mcTransceiverDist should be ignored.
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.4INTEGER {bidi(1), duplex_fiber(2), sfp(3), not-support(4)}read-onlycurrent
mcTransceiverDist
OBJECT-TYPE
Center card's optical transceiver distance, 1 means 550m for duplex_fiber mode in case of 1G card, otherwise it represents the real distance (unit of km).
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.5INTEGER (1..120)read-onlycurrent
mcPortState
OBJECT-TYPE
Center card's port status, locked or unlocked
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.6INTEGER {locked(1), unlocked(2), not-support(3)}read-writecurrent
mcTransmitMode
OBJECT-TYPE
Center card's transmmit mode
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.7INTEGER {cut-through(1), store-forward(2), not-support(3)}read-writecurrent
mcCurWorkMode
OBJECT-TYPE
Center card's current work mode
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.8INTEGER {m100-full(2), m100-half(3), m10-full(4), m10-half(5), m1G-full(6), not-support(7)}read-onlymandatory
mcCfgWorkMode
OBJECT-TYPE
Center card's configurable work mode
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.9INTEGER {mAuto(1), m100-full(2), m100-half(3), m10-full(4), m10-half(5), m1G-full(6), not-support(7)}read-writemandatory
mcLFPCfg
OBJECT-TYPE
Remote fault detect function, valid only on center MC card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.10INTEGER {enable(1), disable(2), not-support(3)}read-writecurrent
mcUpStream
OBJECT-TYPE
Center card's up stream of MC
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.11Gauge32read-writecurrent
mcDownStream
OBJECT-TYPE
Center card's down stream of MC
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.12Gauge32read-writecurrent
mcHWLFP
OBJECT-TYPE
Center card's HW LFP, not applicable for 1G card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.15INTEGER {enable(1), disable(2), not-support(3)}read-onlycurrent
mcHWTransmitMode
OBJECT-TYPE
Center card's HW transmit mode, not applicable for 1G card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.16INTEGER {cut-through(1), store-forward(2), not-support(3)}read-onlycurrent
mcHWWorkMode
OBJECT-TYPE
Center card's HW work mode, not applicable for 1G card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.17INTEGER {mAuto(1), m100-full(2), m100-half(3), m10-full(4), m10-half(5), m1G-full(6), not-support(7)}read-onlycurrent
mcHWRmtCtrlMode
OBJECT-TYPE
Center card's HW remote control mode (only valid for local card). the disable mode indicates that all SET operations must be prohibited
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.18INTEGER {enable(1), disable(2), not-support(3)}read-onlycurrent
mcNtwSfpExist
OBJECT-TYPE
Center 1G card's Network SFP indication
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.19INTEGER {inserted(1), removed(2), na(3), not-support(4)}read-onlycurrent
mcAccSfpExist
OBJECT-TYPE
Center 1G card's Access SFP indication, applicable only for O2O type
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.20INTEGER {inserted(1), removed(2), na(3), not-support(4)}read-onlycurrent
mcUtility
OBJECT-TYPE
reset, default to factory, set to HW word, etc...
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.21INTEGER {idle(1), reset(2), default(3), set2hw(4), not-support(5)}read-writecurrent
mcRmtDetect
OBJECT-TYPE
An identifier to indicate if there is a remote MC currently connecting to system or not
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.22INTEGER {no_remote(0), yes(1), not-support(2)}read-onlycurrent
mcRmtType
OBJECT-TYPE
Remote card's type
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.23INTEGER {no_card(0), ip113sr(1), ip113f(2), mc_1g_e2or(3), mc_1g_o2or(4), not-support(5)}read-onlycurrent
mcRmtTransmitMode
OBJECT-TYPE
Remote card's transmmit mode
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.24INTEGER {no_card(0), cut-through(1), store-forward(2), not-support(3)}read-writecurrent
mcRmtCurWorkMode
OBJECT-TYPE
Remote card's current work mode
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.25INTEGER {no_card(0), m100-full(2), m100-half(3), m10-full(4), m10-half(5), m1G-full(6), not-support(7)}read-onlymandatory
mcRmtCfgWorkMode
OBJECT-TYPE
Remote card's configurable work mode
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.26INTEGER {no_card(0), mAuto(1), m100-full(2), m100-half(3), m10-full(4), m10-half(5), m1G-full(6), not-support(7)}read-writemandatory
mcRmtLFP
OBJECT-TYPE
Remote card's LFP lamp state
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.27INTEGER {no_card(0), enable(1), disable(2), not-support(3)}read-writecurrent
mcRmtHWLFP
OBJECT-TYPE
Remote card's HW LFP, not applicable for 1G card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.29INTEGER {no_card(0), enable(1), disable(2), not-support(3)}read-onlycurrent
mcRmtHWTransmitMode
OBJECT-TYPE
Remote card's HW transmit mode, not applicable for 1G card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.30INTEGER {no_card(0), cut-through(1), store-forward(2), not-support(3)}read-onlycurrent
mcRmtHWWorkMode
OBJECT-TYPE
Remote card's HW work mode, not applicable for 1G card
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.31INTEGER {no_card(0), mAuto(1), m100-full(2), m100-half(3), m10-full(4), m10-half(5), m1G-full(6), not-support(7)}read-onlycurrent
mcRmtLoopback
OBJECT-TYPE
Remote card's HW Loopback state
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.32INTEGER {no_card(0), enable(1), disable(2), not-support(3)}read-writecurrent
mcRmtPwrDown
OBJECT-TYPE
Remote card's power down state
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.33INTEGER {no_card(0), powerdown(1), normal(2), not-support(3)}read-onlycurrent
mcRmtAccSfpExist
OBJECT-TYPE
Remote 1G card's Access SFP indication, applicable only for O2O type
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.34INTEGER {no_card(0), inserted(1), removed(2), na(3), support(4)}read-onlycurrent
mcRmtUtility
OBJECT-TYPE
Rmote cards's reset, default to factory, set to HW word, etc...
1.3.6.1.4.1.34592.1.1.1.4.2.1.1.35INTEGER {no_card(0), idle(1), reset(2), default(3), set2hw(4), not-support(5)}read-writecurrent
mcCm1gSpecificObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.2.2
mcCm1gIpObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.2.2.1
mcCm1gIpTable
OBJECT-TYPE
MC 1G Ip address table
1.3.6.1.4.1.34592.1.1.1.4.2.2.1.1not-accessiblecurrent
mcCm1gIpEntry
OBJECT-TYPE
MC 1G Ip address entry definition
1.3.6.1.4.1.34592.1.1.1.4.2.2.1.1.1not-accessiblecurrent
mcLoOrRmtFg
OBJECT-TYPE
location index, local or remote
1.3.6.1.4.1.34592.1.1.1.4.2.2.1.1.1.1INTEGER {local(1), remote(2)}read-onlycurrent
mcIpAddr
OBJECT-TYPE
The Ip address of the node
1.3.6.1.4.1.34592.1.1.1.4.2.2.1.1.1.2IpAddressread-writecurrent
mcCm1gSfpObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.2.2.2
mcCm1gSfpTable
OBJECT-TYPE
MC 1G SFP table
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1not-accessiblecurrent
mcCm1gSfpEntry
OBJECT-TYPE
MC 1G SFP entry definition
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1not-accessiblecurrent
getSfpCmd
OBJECT-TYPE
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back.
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.1INTEGER {na(0), local(1), remote(2)}read-writecurrent
sfpCompliance
OBJECT-TYPE
SFP compliance (one byte) if 0 then the attributs of sfpTemperature/sfpTranPower/sfpRecvPower should be ignored
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.2INTEGERread-onlycurrent
sfpConnector
OBJECT-TYPE
SFP connector type (one byte) 0x01: SC 0x07: LC 0x22: RJ45 others: unsupported
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.3INTEGERread-onlycurrent
sfpTransCode
OBJECT-TYPE
SFP transceiver code (one byte) bit0: SingleMode bit2: MultiMode bit3: MultiMode others: unsupported
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.4INTEGERread-onlycurrent
sfpSmLength
OBJECT-TYPE
SFP link length for SingleMode, units of km. (one byte) applicable only when sfpTransCode is SingleMode
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.5INTEGERread-onlycurrent
sfpMmLength
OBJECT-TYPE
SFP link length for MultiMode, units of 10m (one byte) applicable only when sfpTransCode is MultiMode
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.6INTEGERread-onlycurrent
sfpCopperLength
OBJECT-TYPE
SFP link length for Copper, units of m (one byte) applicable only when sfpConnector is RJ45
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.7INTEGERread-onlycurrent
sfpBrSpeed
OBJECT-TYPE
SFP nominal signalling rate, units of 100Mbit/s (one byte)
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.8INTEGERread-onlycurrent
sfpWavelength
OBJECT-TYPE
SFP laser wavelength (one word)
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.9INTEGERread-onlycurrent
sfpTemperature
OBJECT-TYPE
SFP temperature (one type, signed)
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.10INTEGERread-onlycurrent
sfpTranPower
OBJECT-TYPE
SFP tx power (one type, signed)
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.11INTEGERread-onlycurrent
sfpRecvPower
OBJECT-TYPE
SFP rx power (one type, signed)
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.12INTEGERread-onlycurrent
sfpVoltage
OBJECT-TYPE
SFP voltage, units of 0.1mV (one word)
1.3.6.1.4.1.34592.1.1.1.4.2.2.2.1.1.13INTEGERread-onlycurrent
mcPmObjects
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.1.4.3
mcPmTable
OBJECT-TYPE
MC Performance table
1.3.6.1.4.1.34592.1.1.1.4.3.1not-accessiblecurrent
mcPmEntry
OBJECT-TYPE
MC Performance entry definition
1.3.6.1.4.1.34592.1.1.1.4.3.1.1not-accessiblecurrent
mcRxByteHi
OBJECT-TYPE
The total number of reveive bytes (high)
1.3.6.1.4.1.34592.1.1.1.4.3.1.1.1Counter32read-onlycurrent
mcRxByteLo
OBJECT-TYPE
The total number of reveive bytes (low)
1.3.6.1.4.1.34592.1.1.1.4.3.1.1.2Counter32read-onlycurrent
mcTxByteHi
OBJECT-TYPE
The total number of transmit bytes (high)
1.3.6.1.4.1.34592.1.1.1.4.3.1.1.3Counter32read-onlycurrent
mcTxByteLo
OBJECT-TYPE
The total number of transmit bytes (low)
1.3.6.1.4.1.34592.1.1.1.4.3.1.1.4Counter32read-onlycurrent
mcPmRest
OBJECT-TYPE
reset counter
1.3.6.1.4.1.34592.1.1.1.4.3.1.1.5INTEGER {idle(1), reset(2), not-support(3)}read-writecurrent
alarmMIB
OBJECT-IDENTITY
1.3.6.1.4.1.34592.1.1.2

Notifications

NameOIDStatus
shelf_Detected
NOTIFICATION-TYPE
A slave shelf is detected
1.3.6.1.4.1.34592.1.1.2.1current
shelf_Lost
NOTIFICATION-TYPE
A shelf is lost
1.3.6.1.4.1.34592.1.1.2.2current
shelf_psuA_On
NOTIFICATION-TYPE
PSU A is detected
1.3.6.1.4.1.34592.1.1.2.3current
shelf_psuA_Off
NOTIFICATION-TYPE
PSU A is lost
1.3.6.1.4.1.34592.1.1.2.4current
shelf_psuB_On
NOTIFICATION-TYPE
PSU B is detected
1.3.6.1.4.1.34592.1.1.2.5current
shelf_psuB_Off
NOTIFICATION-TYPE
PSU B is lost
1.3.6.1.4.1.34592.1.1.2.6current
shelf_fan_On
NOTIFICATION-TYPE
Fan A is detected
1.3.6.1.4.1.34592.1.1.2.7current
shelf_fan_Off
NOTIFICATION-TYPE
Fan A is lost
1.3.6.1.4.1.34592.1.1.2.8current
card_Detected
NOTIFICATION-TYPE
A card is detected
1.3.6.1.4.1.34592.1.1.2.20current
card_Lost
NOTIFICATION-TYPE
A card is lost
1.3.6.1.4.1.34592.1.1.2.21current
card_MC_Co_Tx_Up
NOTIFICATION-TYPE
The tx link of mc in center side is up
1.3.6.1.4.1.34592.1.1.2.30current
card_MC_Co_Tx_Down
NOTIFICATION-TYPE
The tx link of mc in center side is broken
1.3.6.1.4.1.34592.1.1.2.31current
card_MC_Co_Fx_Up
NOTIFICATION-TYPE
The fx link of mc in center side is up
1.3.6.1.4.1.34592.1.1.2.32current
card_MC_Co_Fx_Down
NOTIFICATION-TYPE
The fx link of mc in center side is broken
1.3.6.1.4.1.34592.1.1.2.33current
card_MC_Rmt_Tx_Up
NOTIFICATION-TYPE
The tx link of mc in customer side is up
1.3.6.1.4.1.34592.1.1.2.34current
card_MC_Rmt_Tx_Down
NOTIFICATION-TYPE
The tx link of mc in customer side is broken
1.3.6.1.4.1.34592.1.1.2.35current
card_MC_Rmt_PwrDown
NOTIFICATION-TYPE
Remote mc power down detected
1.3.6.1.4.1.34592.1.1.2.36current
card_MC_Co_Ntw_SFP_Inserted
NOTIFICATION-TYPE
Local network port SFP inserted
1.3.6.1.4.1.34592.1.1.2.37current
card_MC_Co_Ntw_SFP_Removed
NOTIFICATION-TYPE
Local network port SFP removed
1.3.6.1.4.1.34592.1.1.2.38current
card_MC_Co_Acc_SFP_Inserted
NOTIFICATION-TYPE
Local access port SFP inserted
1.3.6.1.4.1.34592.1.1.2.39current
card_MC_Co_Acc_SFP_Removed
NOTIFICATION-TYPE
Local access port SFP removed
1.3.6.1.4.1.34592.1.1.2.40current
card_MC_Rmt_Acc_SFP_Inserted
NOTIFICATION-TYPE
Remote access port SFP inserted
1.3.6.1.4.1.34592.1.1.2.41current
card_MC_Rmt_Acc_SFP_Removed
NOTIFICATION-TYPE
Remote access port SFP removed
1.3.6.1.4.1.34592.1.1.2.42current