MIBs Depot

Wellfleet-MODULE-MIB

Registered at
1.3.6.1.4.1.18.3.1.4.1
1.3.6.1.4.1.18.3.1.4.2
Namespace
nortel
Source file
Wellfleet-MODULE-MIB
Digest
sha256:40d2552123878fe893a49217fea73e6214325e64541c7d7adcb1b96b47534b18

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION
Wellfleet-COMMON-MIBwfHwModuleGroup

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
Wellfleet-COMMON-MIB
Wellfleet-MODULE-MIB

Objects

NameOIDSyntaxAccessStatus
wfHwModuleTable
OBJECT-TYPE
Hardware Module Table Filled in by the Module Driver. Read by SNMP to build the driver load records
1.3.6.1.4.1.18.3.1.4.1not-accessiblemandatory
wfHwModuleEntry
OBJECT-TYPE
Hardware specific information about a slot.
1.3.6.1.4.1.18.3.1.4.1.1not-accessiblemandatory
wfHwModuleSlot
OBJECT-TYPE
A unique value for each slot. Its value ranges between 1 and 4.
1.3.6.1.4.1.18.3.1.4.1.1.1INTEGERread-onlymandatory
wfHwModuleModule
OBJECT-TYPE
This value ranges between 1 and 4
1.3.6.1.4.1.18.3.1.4.1.1.2INTEGERread-onlymandatory
wfHwModuleModIdOpt
OBJECT-TYPE
Module IDs for the net modules modules
1.3.6.1.4.1.18.3.1.4.1.1.3INTEGER {spex(512), spexhss(768), spexhsd(769), denm(1280), denmhwf(1281), iqe(1408), dsnmnn(1536), dsnmn1(1537), dsnmn2(1538), dsnm1n(1540), dsnm11(1541), dsnm12(1542), dsnm2n(1544), dsnm21(1545), dsnm22(1546), dsnmnnisdn(1584), dsnmn1isdn(1585), dsnmn2isdn(1586), dsnm1nisdn(1588), dsnm11isdn(1589), dsnm12isdn(1590), dsnm2nisdn(1592), dsnm21isdn(1593), dsnm22isdn(1594), qsyncnm(1664), mmfsdsas(1792), mmfsddas(1793), smfsdsas(1800), smfsddas(1801), mmscsas(1808), mmscdas(1809), smammbdas(1825), mmasmbdas(1833), mmfsdsashwf(1856), mmfsddashwf(1857), smfsdsashwf(1864), smfsddashwf(1865), mmscsashwf(1872), mmscdashwf(1873), smammbdashwf(1889), mmasmbdashwf(1897), dtnm(2048), cam(2049), iqtok(2176), se100nm(2304), asnqbri(2560), mce1nm(2816), dmct1nm(2944), hwcompnm32(3072), hwcompnm128(3073), ahwcompnm32(3328), ahwcompnm128(3329), ahwcompnm256(3330), shssinm(3584), fbrmbdfen(8000), ds1e1atm(8160), ds3e3atm(8161), pmcdsync(8320), pmcqsync(8321), fvoippmcc(8500), fvoipt1e1pmc(8501), arnmbstr(8704), arnmbsen(8720), arnmbsfetx(8728), arnmbsfefx(8729), arnssync(8736), litembsfetx(8744), arnv34(8752), arndcsu(8768), arnft1(8776), arnfe1(8780), arnisdns(8784), arnisdnu(8800), arnisdb(8808), arnstkrg(8816), arnsenet(8832), arntsync(8848), arnentsync(8864), arne7sync(8872), arn7sync(8873), arntrtsync(8880), arnvoice(8890), arnvoicedsync(8891), arnmbenx10(8896), arnmbtrx10(8912), arnpbenx10(8928), arnpbtrx10(8944), arnpbtenx10(8960), arnpbe7sx10(8972), arnpbttrx10(8976), snm10t16(16384), snm100t2(16640), snmatmoc31mm(16896), snmatmoc31dmm(16897), snmatmoc31sm(16898), snmatmoc31dsm(16899), snmfddismm(17152), snmfddisms(17153), snmfddissm(17154), snmfddisss(17155), snm10f8(17408), snm100f2(17664), snm10t16p4(17920), snm100t2p4(18176), snm10t14100t1(18432), snm100t16(18688), snm10t14100f1(18944), atm5000ah(524288), atm5000bh(524544)}read-onlymandatory
wfHwModuleModRev
OBJECT-TYPE
The revision level of the module. High byte is in upper 2 bytes.
1.3.6.1.4.1.18.3.1.4.1.1.4OCTET STRINGread-onlymandatory
wfHwModuleModSerialNumber
OBJECT-TYPE
The serial number of the module.
1.3.6.1.4.1.18.3.1.4.1.1.5OCTET STRINGread-onlymandatory
wfHwModuleArtworkRev
OBJECT-TYPE
The Artwork Revision number of the module
1.3.6.1.4.1.18.3.1.4.1.1.6DisplayStringread-onlymandatory
wfHwModuleMemorySize1
OBJECT-TYPE
Size (in bytes) of memory #1.
1.3.6.1.4.1.18.3.1.4.1.1.7INTEGERread-onlymandatory
wfHwModuleMemorySize2
OBJECT-TYPE
Size (in bytes) of memory #2.
1.3.6.1.4.1.18.3.1.4.1.1.8INTEGERread-onlymandatory
wfHwModuleDaughterBdIdOpt
OBJECT-TYPE
Daughterboard IDs that may be attached to net modules
1.3.6.1.4.1.18.3.1.4.1.1.9INTEGERread-onlymandatory
wfHwModuleLEDStatus1
OBJECT-TYPE
Bit mask representing the status of the LEDs on the module. Each LED is represented by 2 bits. LED #1 status is indicated by the 2 least significant bits. LED #16 status is indicated by the 2 most significant bits. How this bit mask is interpreted depends on the module ID. For example, some modules use this value to report what color the LED is currently set to ('00' off, '01' yellow, '10' green). This value can be used by a NMS that needs to know this information for whatever reason. Some modules may not support this value in which case it should be set to zero.
1.3.6.1.4.1.18.3.1.4.1.1.10INTEGERread-onlymandatory
wfHwModuleLEDState1
OBJECT-TYPE
Bit mask representing the state of the LEDs on the module. Each LED is represented by 2 bits. LED #1 state is indicated by the 2 least significant bits. LED #16 state is indicated by the 2 most significant bits. How this bit mask is interpreted depends on the module ID. For example, some modules use this value to indicate a LED is flashing (value of '01') or a solid color (value of '00'). This value can be used by a NMS that needs to know this information for whatever reason. Some modules may not support this value in which case it should be set to zero.
1.3.6.1.4.1.18.3.1.4.1.1.11INTEGERread-onlymandatory
wfHwModuleLEDStatus2
OBJECT-TYPE
Bit mask representing the status of the LEDs on the module. Each LED is represented by 2 bits. LED #17 status is indicated by the 2 least significant bits. LED #32 status is indicated by the 2 most significant bits. How this bit mask is interpreted depends on the module ID. For example, some modules use this value to report what color the LED is currently set to ('00' off, '01' yellow, '10' green). This value can be used by a NMS that needs to know this information for whatever reason. Some modules may not support this value in which case it should be set to zero.
1.3.6.1.4.1.18.3.1.4.1.1.12INTEGERread-onlymandatory
wfHwModuleLEDState2
OBJECT-TYPE
Bit mask representing the state of the LEDs on the module. Each LED is represented by 2 bits. LED #17 state is indicated by the 2 least significant bits. LED #32 state is indicated by the 2 most significant bits. How this bit mask is interpreted depends on the module ID. For example, some modules use this value to indicate a LED is flashing (value of '01') or a solid color (value of '00'). This value can be used by a NMS that needs to know this information for whatever reason. Some modules may not support this value in which case it should be set to zero.
1.3.6.1.4.1.18.3.1.4.1.1.13INTEGERread-onlymandatory
wfHwModuleLEDStatus3
OBJECT-TYPE
Bit mask representing the status of the LEDs on the module. Each LED is represented by 2 bits. LED #33 status is indicated by the 2 least significant bits. LED #48 status is indicated by the 2 most significant bits. How this bit mask is interpreted depends on the module ID. For example, some modules use this value to report what color the LED is currently set to ('00' off, '01' yellow, '10' green). This value can be used by a NMS that needs to know this information for whatever reason. Some modules may not support this value in which case it should be set to zero.
1.3.6.1.4.1.18.3.1.4.1.1.14INTEGERread-onlymandatory
wfHwModuleLEDState3
OBJECT-TYPE
Bit mask representing the state of the LEDs on the module. Each LED is represented by 2 bits. LED #33 state is indicated by the 2 least significant bits. LED #48 state is indicated by the 2 most significant bits. How this bit mask is interpreted depends on the module ID. For example, some modules use this value to indicate a LED is flashing (value of '01') or a solid color (value of '00'). This value can be used by a NMS that needs to know this information for whatever reason. Some modules may not support this value in which case it should be set to zero.
1.3.6.1.4.1.18.3.1.4.1.1.15INTEGERread-onlymandatory
wfModuleTable
OBJECT-TYPE
This table is used by the module driver for Barracuda
1.3.6.1.4.1.18.3.1.4.2not-accessiblemandatory
wfModuleEntry
OBJECT-TYPE
Hardware specific information about a slot.
1.3.6.1.4.1.18.3.1.4.2.1not-accessiblemandatory
wfModuleDelete
OBJECT-TYPE
create/delete parameter
1.3.6.1.4.1.18.3.1.4.2.1.1INTEGER {created(1), deleted(2)}read-writemandatory
wfModuleSlot
OBJECT-TYPE
A unique value for each slot. Its value ranges between 1 and 14. There are products in this family that contain 1, 5, and 14 slots.
1.3.6.1.4.1.18.3.1.4.2.1.2INTEGERread-onlymandatory
wfModuleTimerFrequency
OBJECT-TYPE
This value determines the frequency for the buffer balance algorithm to run
1.3.6.1.4.1.18.3.1.4.2.1.3INTEGER {timerdefault(1)}read-writemandatory
wfModuleBufferBalance
OBJECT-TYPE
Enable/Disable buffer balancing algorithm selectively
1.3.6.1.4.1.18.3.1.4.2.1.4INTEGER {txrx(1), none(2), rx(3), tx(4)}read-writemandatory
wfModuleFddiWeight
OBJECT-TYPE
This value determines the weight of the fddi line for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.5INTEGER (1..10)read-writemandatory
wfModuleTokenRingWeight
OBJECT-TYPE
This value determines the weight of the token-ring for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.6INTEGER (1..10)read-writemandatory
wfModuleCsmacdWeight
OBJECT-TYPE
This value determines the weight of the csmacd line for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.7INTEGER (1..10)read-writemandatory
wfModuleSyncWeight
OBJECT-TYPE
This value determines the weight of the sync line for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.8INTEGER (1..10)read-writemandatory
wfModuleFreeBufferCredits
OBJECT-TYPE
This attribute indicates the number of buffers available to line drivers but not used by them
1.3.6.1.4.1.18.3.1.4.2.1.9INTEGERread-onlymandatory
wfModuleTotalBufferCredits
OBJECT-TYPE
This attribute indicates the total number of buffers available to line drivers
1.3.6.1.4.1.18.3.1.4.2.1.10INTEGERread-onlymandatory
wfModuleRestart
OBJECT-TYPE
This attribute should be touched after the queue lengths are configured in the line-records
1.3.6.1.4.1.18.3.1.4.2.1.11INTEGERread-writemandatory
wfModuleCsmacd100Weight
OBJECT-TYPE
This value determines the weight of the csmacd 100MB line for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.12INTEGER (1..10)read-writemandatory
wfModuleBisyncWeight
OBJECT-TYPE
This value determines the weight of the bisync line for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.13INTEGER (1..10)read-writemandatory
wfModuleHssiWeight
OBJECT-TYPE
This value determines the weight of the hssi line for the buffer balancing algorithm
1.3.6.1.4.1.18.3.1.4.2.1.14INTEGER (1..10)read-writemandatory