MIBs Depot

WWP-LEOS-VPLS-MIB

Registered at
1.3.6.1.4.1.6141.2.60.28
Last updated
2011-06-06 00:00
Organization
Ciena, Inc
Revisions
2011-06-06 00:00, 2010-03-23 17:00, 2010-02-10 17:00, 2010-01-27 04:25, 2009-08-24 04:24, 2008-11-14 00:00, 2008-09-03 08:39, 2008-06-11 00:50, 2008-05-15 00:50, 2006-09-22 00:50, 2006-05-04 17:00, 2005-08-15 17:00
Namespace
ciena
Source file
WWP-LEOS-VPLS-MIB
Digest
sha256:4d22d1aac6e5d643b8a977319205e0b2189bc4de5fd614b1e8877a742c69009e

Description

Added a new object wwpLeosVplsVirtualSwitchEthEvplMemberServiceVlanTpid.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
WWP-SMIwwpModulesLeos

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WWP-LEOS-VPLS-MIB
WWP-SMI

Textual conventions

NameOIDSyntaxAccessStatus
EtherType
TEXTUAL-CONVENTION
Ethernet v2 framing identifies upper layer protocol.
current
VlanId
TEXTUAL-CONVENTION
A Vlan Id represents a Broadcast Domain.
current

Objects

NameOIDSyntaxAccessStatus
wwpLeosVplsMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.1
wwpLeosVpls
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.1.1
wwpLeosVplsVirtualCircuitTable
OBJECT-TYPE
The (conceptual) table listing the virtual circuit table. To create entry use SNMP, multiple set operation must be used because following MIB objects needs to be set while creating entry in the table. - wwpLeosVplsVirtualCircuitIndex - wwpLeosVplsVirtualCircuitProviderVlanId (should exist on the device) - wwpLeosVplsVirtualCircuitType - wwpLeosVplsVirtualCircuitStatus. - wwpLeosVplsVirtualCircuitName.
1.3.6.1.4.1.6141.2.60.28.1.1.1not-accessibledeprecated
wwpLeosVplsVirtualCircuitEntry
OBJECT-TYPE
The virtual circuit table entry index by wwpLeosVplsVirtualCircuitIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1not-accessibledeprecated
wwpLeosVplsVirtualCircuitIndex
OBJECT-TYPE
This represents the virtual circuit index in the table. This number should be unique in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.1INTEGER (1..65535)read-onlydeprecated
wwpLeosVplsVirtualCircuitProviderVlanId
OBJECT-TYPE
This represents the provider vlan id associated with the virtual circuit for a given wwpLeosVplsVirtualCircuitIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.2VlanIdread-writedeprecated
wwpLeosVplsVirtualCircuitType
OBJECT-TYPE
This represents the type of virtual circuit associated with the given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.3INTEGER {ethernet(1), mpls(2)}read-createdeprecated
wwpLeosVplsVirtualCircuitName
OBJECT-TYPE
This represents the name of the virtual circuit associated with the given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.4DisplayString (SIZE(1..31))read-createdeprecated
wwpLeosVplsVirtualCircuitIngressVcLabel
OBJECT-TYPE
This represents the vc label to be used for given virtual circuit. This mib object can only be set for virtual circuit entries which has wwpLeosCircuitType = mpls.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.5INTEGER (16..1048575)read-writedeprecated
wwpLeosVplsVirtualCircuitEgressVcLabel
OBJECT-TYPE
This represents the vc label to be used for given virtual circuit. This mib object can only be set for virtual circuit entries which has wwpLeosCircuitType = mpls.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.6INTEGER (16..1048575)read-writedeprecated
wwpLeosVplsVirtualCircuitTunnelIndx
OBJECT-TYPE
This represents the tunnel associated with this virtual circuit. This mib object can only be set for virtual circuit entries which has wwpLeosCircuitType = mpls.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.7INTEGER (1..65535)read-writedeprecated
wwpLeosVplsVirtualCircuitStatus
OBJECT-TYPE
Setting this object to 'createAndGo' will create the entry and by default will enable control frame and data frame tunnel . Setting this object to 'destroy' will delete the entry from the table for given vlan.
1.3.6.1.4.1.6141.2.60.28.1.1.1.1.8RowStatusread-createdeprecated
wwpLeosVplsVirtualSwitchTable
OBJECT-TYPE
This table is used to manage virtual switch entries on the device.
1.3.6.1.4.1.6141.2.60.28.1.1.5not-accessibledeprecated
wwpLeosVplsVirtualSwitchEntry
OBJECT-TYPE
This entry corresponds to single entry in wwpLeosVplsVirtualSwitchTable table. To create an entry in the table following criteria must be met. - wwpLeosVplsVirtualSwitchIndx must be specified. - wwpLeosVplsVirtualSwitchStatus must be specified. - wwpLeosVplsVirtualSwitchType must be specified. - wwpLeosVplsVirtualSwitchName must be specified
1.3.6.1.4.1.6141.2.60.28.1.1.5.1not-accessibledeprecated
wwpLeosVplsVirtualSwitchIndx
OBJECT-TYPE
This object specifies the virtual switch index which is used as unique index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.1INTEGER (1..65535)read-onlydeprecated
wwpLeosVplsVirtualSwitchName
OBJECT-TYPE
This object specifies the virtual switch name. this object can only be specified at the time of creation and cannot be modified later.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.2OCTET STRING (SIZE(0..31))read-writedeprecated
wwpLeosVplsVirtualSwitchPriVc
OBJECT-TYPE
This object specifies the primary virtual circuit ID associated with this virtual switch. To unset it set this to 0.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.3INTEGER (0..65535)read-writedeprecated
wwpLeosVplsVirtualSwitchSecVc
OBJECT-TYPE
This object specifies the secondary virtual circuit ID associated with this virtual switch. To unset it set this to 0. This object is applicable if wwpLeosVplsVirtualSwitchType = mpls.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.4INTEGER (0..65535)read-writedeprecated
wwpLeosVplsVirtualSwitchActiveVc
OBJECT-TYPE
This object specifies the virtual circuit which is currently used by this virtual switch instance.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.5INTEGER {none(1), primVc(2), secVc(3)}read-onlydeprecated
wwpLeosVplsVirtualSwitchEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.6INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4)}read-writedeprecated
wwpLeosVplsVirtualSwitchEncapFixedDot1dPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.7INTEGER (0..7)read-writedeprecated
wwpLeosVplsVirtualSwitchDecapCosPolicy
OBJECT-TYPE
This object specifies the egress cos policy for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.8INTEGER {fixed(1), inheritVc(2), inheritTunnel(3), leave(4)}read-writedeprecated
wwpLeosVplsVirtualSwitchDecapFixedDot1dPri
OBJECT-TYPE
This object specifies the egress cos attributes for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.9INTEGER (0..7)read-writedeprecated
wwpLeosVplsVirtualSwitchSubscriberVlan
OBJECT-TYPE
This object specifies the subscriber vlan Id for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.10INTEGER (0..4094)read-writedeprecated
wwpLeosVplsVirtualSwitchCtrlProtocolTunnelState
OBJECT-TYPE
This object enables or disables control protocol tunneling for a given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.11INTEGER {enabled(1), disabled(2)}read-writedeprecated
wwpLeosVplsVirtualSwitchType
OBJECT-TYPE
This object specifies the type of virtual witch.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.12INTEGER {ethernet(1), mpls(2)}read-createdeprecated
wwpLeosVplsVirtualSwitchStatus
OBJECT-TYPE
This object can be set to 'createAndGo' to create entry in the table. This object can be set to 'destroy' to delete entry in the table. Following objects must be set to valid values to create entry in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.5.1.13RowStatusread-createdeprecated
wwpLeosVplsVirtualSwitchMemberTable
OBJECT-TYPE
This table is used to create virtual switch membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.6not-accessibledeprecated
wwpLeosVplsVirtualSwitchMemberEntry
OBJECT-TYPE
This entry corresponds to single entry in wwpLeosVplsVirtualSwitchMemberTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.6.1not-accessibledeprecated
wwpLeosVplsVirtualSwitchMemberPortId
OBJECT-TYPE
This object specifies the port id associated with wwpLeosVplsVirtualSwitchIndx.
1.3.6.1.4.1.6141.2.60.28.1.1.6.1.1INTEGER (1..65535)read-onlydeprecated
wwpLeosVplsVirtualSwitchMemberStatus
OBJECT-TYPE
This object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.6.1.2RowStatusread-createdeprecated
wwpLeosVplsSwitchCtrlProtocolTable
OBJECT-TYPE
The (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.
1.3.6.1.4.1.6141.2.60.28.1.1.7not-accessibledeprecated
wwpLeosVplsSwitchCtrlProtocolEntry
OBJECT-TYPE
The layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
1.3.6.1.4.1.6141.2.60.28.1.1.7.1not-accessibledeprecated
wwpLeosVplsSwitchCtrlProtocolNum
OBJECT-TYPE
This object represent the list of protocols the device can support.
1.3.6.1.4.1.6141.2.60.28.1.1.7.1.1INTEGER {l28021x(1), rstp(2), ciscoCdp(3), ciscoDtp(4), ciscoPagp(5), ciscoPvst(6), ciscoUplinkFast(7), ciscoUdlp(8), ciscoVtp(9), gvrp(10), lacp(11), lacpMarker(12), oam(13), lldp(14), vlanBridge(15)}read-onlydeprecated
wwpLeosVplsSwitchCtrlType
OBJECT-TYPE
Setting this object to 'discard' will cause wwpLeosVplsSwitchCtrlProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosVplsSwitchCtrlProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosVplsSwitchCtrlProtocolNum frame to be tunneled.
1.3.6.1.4.1.6141.2.60.28.1.1.7.1.2INTEGER {discard(1), peer(2), tunnel(3)}read-createdeprecated
wwpLeosVplsSwitchReservedVlanTable
OBJECT-TYPE
The (conceptual) table listing the reserved Vlans used for virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.8not-accessiblecurrent
wwpLeosVplsSwitchReservedVlanEntry
OBJECT-TYPE
The entry to reserve vlans for vlan switch.
1.3.6.1.4.1.6141.2.60.28.1.1.8.1not-accessiblecurrent
wwpLeosVplsSwitchReservedVlanId
OBJECT-TYPE
This object is used to specify the vlan ID to be reserved for virtual switch. Reserved vlans are used when virtual switch is created.
1.3.6.1.4.1.6141.2.60.28.1.1.8.1.1INTEGER (1..24576)read-onlycurrent
wwpLeosVplsSwitchReservedVlanStatus
OBJECT-TYPE
Setting this object to 'createandgo' will reserve the vlan for virtual switch. Setting this object to 'destroy will no longer be reserved for virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.8.1.2RowStatusread-createcurrent
wwpLeosVplsGlobalAttrs
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.1.1.9
wwpLeosVplsTunnelFixedTTL
OBJECT-TYPE
This object specifies the fixed TTL value for all tunnels.
1.3.6.1.4.1.6141.2.60.28.1.1.9.1INTEGER (2..255)read-writecurrent
wwpLeosVplsResolverTimeout
OBJECT-TYPE
Setting this object will set the PE resolver timeout. This timeout value decides how frequently PE resolver will arp for the destination IP specified by wwpLeosVplsEncapTunnelDestAddr.
1.3.6.1.4.1.6141.2.60.28.1.1.9.2INTEGER (10..255)read-writecurrent
wwpLeosVplsStaticLabelRangeStart
OBJECT-TYPE
Setting this object will set the lowest label that can be assigned to static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsStaticLabelRangeStart and wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart must always be less than wwpLeosVplsStaticLabelRangeEnd. The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.
1.3.6.1.4.1.6141.2.60.28.1.1.9.3Unsigned32 (0 | 16..1048575)read-writecurrent
wwpLeosVplsStaticLabelRangeEnd
OBJECT-TYPE
Setting this object will set the maximum label that can be assigned to static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsStaticLabelRangeStart and wwpLeosVplsStaticLabelRangeEnd. wwpLeosVplsStaticLabelRangeStart must always be less than wwpLeosVplsStaticLabelRangeEnd.The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.
1.3.6.1.4.1.6141.2.60.28.1.1.9.4Unsigned32 (0 | 16..1048575)read-writecurrent
wwpLeosVplsDynamicLabelRangeStart
OBJECT-TYPE
Setting this object will set the lowest label that can be assigned to dynamic encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsDynamicLabelRangeStart and wwpLeosVplsDynamicLabelRangeEnd. wwpLeosVplsDynamicLabelRangeStart must always be less than wwpLeosVplsDynamicLabelRangeEnd.The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.
1.3.6.1.4.1.6141.2.60.28.1.1.9.5Unsigned32 (0 | 16..1048575)read-writecurrent
wwpLeosVplsDynamicLabelRangeEnd
OBJECT-TYPE
Setting this object will set the maximum label that will be assigned to encap tunnels or virtual circuits. Multiple set operation can be used to set both wwpLeosVplsDynamicLabelRangeStart and wwpLeosVplsDynamicLabelRangeEnd. wwpLeosVplsDynamicLabelRangeStart must always be less than wwpLeosVplsDynamicLabelRangeEnd. The value of 0 means label range is not available. Attempting to set this object to 0 will return COMMIT FAILED.
1.3.6.1.4.1.6141.2.60.28.1.1.9.6Unsigned32 (0 | 16..1048575)read-writecurrent
wwpLeosVplsVirtualCircuitStatsClear
OBJECT-TYPE
Setting this object to clear will reset statistics for all virtual circuits
1.3.6.1.4.1.6141.2.60.28.1.1.9.7INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosVplsMplsPathTable
OBJECT-TYPE
Mpls Path table used to represent the explicit path for RSVP tunnels.
1.3.6.1.4.1.6141.2.60.28.1.1.10not-accessiblecurrent
wwpLeosVplsMplsPathEntry
OBJECT-TYPE
Entry in the MPLS Path table.
1.3.6.1.4.1.6141.2.60.28.1.1.10.1not-accessiblecurrent
wwpLeosVplsMplsPathIndex
OBJECT-TYPE
This mib specifies the unique entry in the Mpls path table. This is the primary index into this table identifying a particular explicit route object
1.3.6.1.4.1.6141.2.60.28.1.1.10.1.1INTEGER (1..32)read-onlycurrent
wwpLeosVplsMplsPathName
OBJECT-TYPE
This mib specifies the name for the path.
1.3.6.1.4.1.6141.2.60.28.1.1.10.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsMplsPathRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.10.1.3RowStatusread-createcurrent
wwpLeosVplsMplsPathMemberTable
OBJECT-TYPE
Table specifies the list of IP addresses (Hops) to get to the destination PE.
1.3.6.1.4.1.6141.2.60.28.1.1.11not-accessiblecurrent
wwpLeosVplsMplsPathMemberEntry
OBJECT-TYPE
Represents the entry in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.11.1not-accessiblecurrent
wwpLeosVplsMplsPathOptionIndex
OBJECT-TYPE
Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.1INTEGER (1..5)read-onlycurrent
wwpLeosVplsMplsPathMemberIpIndex
OBJECT-TYPE
Unique index to identify the IP address within the path specifies by wwpLeosVplsMplsPathIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.2INTEGER (1..5)read-onlycurrent
wwpLeosVplsMplsPathMemberIp
OBJECT-TYPE
Specifies the IP address of the Hop that the tunnel the tunnel should traverse.
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.3IpAddressread-createcurrent
wwpLeosVplsMplsPathMemberRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.11.1.4RowStatusread-createcurrent
wwpLeosVplsRsvpAttrTable
OBJECT-TYPE
RSVP Attr Table used by MPLS wwpLeosVplsEncapTunnelTable Tunnels when wwpLeosVplsEncapTunnelProtType = rsvp. Whenever entry is created in the wwpLeosVplsEncapTunnelTable table with wwpLeosVplsEncapTunnelProtType = rsvp and wwpLeosVplsEncapTunnelType = dynamic then corresponding entry will be created in this table with the same index as wwpLeosVplsEncapTunnelId.
1.3.6.1.4.1.6141.2.60.28.1.1.12not-accessiblecurrent
wwpLeosVplsRsvpAttrEntry
OBJECT-TYPE
Entry in wwpLeosVplsRsvpAttrTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.12.1not-accessiblecurrent
wwpLeosVplsRsvpAttrIndex
OBJECT-TYPE
Unique index into the table.
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsRsvpAttrHoldPri
OBJECT-TYPE
The Hold priority used by RSVP protocol when signaling for tunnels.
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.2INTEGER (0..7)read-writecurrent
wwpLeosVplsRsvpAttrSetupPri
OBJECT-TYPE
The setup priority used by RSVP protocol when signaling for tunnels.
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.3INTEGER (0..7)read-writecurrent
wwpLeosVplsRsvpAttrRecordRoute
OBJECT-TYPE
The object specifies if record route feature is enabled when RSVP protocol is used to signal tunnel LSP.
1.3.6.1.4.1.6141.2.60.28.1.1.12.1.4TruthValueread-writecurrent
wwpLeosVplsEncapTunnelTable
OBJECT-TYPE
This table represents the encap tunnels for VPLS. To create STATIC encap tunnel following objects must be set Encap and Decap Tunnel name cannot be same but indexes can be wwpLeosVplsEncapTunnelName must be specified. wwpLeosVplsEncapTunnelEncapLabel must be specified (0, 32..1023) wwpLeosVplsEncapTunnelType must be set to static wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo To create DYNAMIC encap tunnel following objects must be set wwpLeosVplsEncapTunnelName must be specified wwpLeosVplsEncapTunnelType must be set to dynamic wwpLeosVplsEncapTunnelProtType must be set to rsvp wwpLeosVplsEncapTunnelPathName must be specified, this path must exist in wwpLeosVplsMplsPathTable wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. wwpLeosVplsEncapTunnelFastReroute must be set if wanted to use fast reroute wwpLeosVplsEncapTunnelLspType must be specified, if not specified then it will be assumed primary To create DYNAMIC encap backup tunnel following objects must be set wwpLeosVplsEncapTunnelName must be set to primary tunnel name that this tunnel is backing up. wwpLeosVplsEncapTunnelType must be set to dynamic wwpLeosVplsEncapTunnelProtType must be set to rsvp wwpLeosVplsEncapTunnelPathName must be specified, this path must exist in wwpLeosVplsMplsPathTable wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. To create static PBT encap tunnel following objects must be set wwpLeosVplsEncapTunnelName must be specified wwpLeosVplsEncapTunnelType must be set to staticPbt wwpLeosVplsEncapTunnelBVID must be specified wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo. wwpLeosVplsEncapTunnelDestBridgeIndex must be set wwpLeosVplsEncapTunnelEgressPort must be specified
1.3.6.1.4.1.6141.2.60.28.1.1.13not-accessiblecurrent
wwpLeosVplsEncapTunnelEntry
OBJECT-TYPE
Represents each entry in wwpLeosVplsEncapTunnelTable.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1not-accessiblecurrent
wwpLeosVplsEncapTunnelId
OBJECT-TYPE
This object specifies the unique index used in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsEncapTunnelName
OBJECT-TYPE
This object specfies the name assigned to this tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created. Encap and Decap Tunnel name cannot be same but indexes can be. When creating backup tunnel this name should be set to same name that is also used by primary tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsEncapTunnelType
OBJECT-TYPE
This object specifies the type of tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.3INTEGER {static(1), dynamic(2), staticPbt(3)}read-createcurrent
wwpLeosVplsEncapTunnelDestAddr
OBJECT-TYPE
This object specifies the IP address used to resolve this tunnel. This object is only applicable if wwpLeosVplsEncapTunnelType not equal to staticPbt.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.4IpAddressread-writecurrent
wwpLeosVplsEncapTunnelPathIndex
OBJECT-TYPE
This object specifies the path that this tunnel is supposed to use signal labels for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set to dynamic.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.5Integer32read-createcurrent
wwpLeosVplsEncapTunnelEncapCosPolicy
OBJECT-TYPE
This object specifies the PBT encapsulated cos policy assigned to this tunnel. inheritVC and inheritVs options are deprecated and should not be used. rcos-mapped option should be used in place of inheritVc
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.6INTEGER {fixed(1), inheritVc(2), inheritVs(3), rcosMapped(4)}read-writecurrent
wwpLeosVplsEncapTunnelEncapFixedExp
OBJECT-TYPE
This object specifies the encap fixed EXP assigned to this tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.7INTEGER (0..7)read-writecurrent
wwpLeosVplsEncapTunnelTTLPolicy
OBJECT-TYPE
This object specifies the TTL policy for given tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.8INTEGER {pipe(1), uniform(2)}read-writecurrent
wwpLeosVplsEncapTunnelEncapLabel
OBJECT-TYPE
This mib object specifies the encap label assigned to this tunnel. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.9Unsigned32 (0..1048576)read-writecurrent
wwpLeosVplsEncapTunnelProtType
OBJECT-TYPE
Setting this object at the time of entry creation will specify the type of Protocol to be used for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set to dynamic. This object cannot be modified after the entry has been created.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.10INTEGER {none(1), rsvp(2)}read-createcurrent
wwpLeosVplsEncapTunnelDestResolvedMac
OBJECT-TYPE
This object specifies the resolved mac address for given destination IP (wwpLeosVplsEncapTunnelDestIp).
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.11MacAddressread-onlycurrent
wwpLeosVplsEncapTunnelOperStatus
OBJECT-TYPE
This mib object represents the operational status of tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.12INTEGER {enabled(1), disabled(2)}read-onlycurrent
wwpLeosVplsEncapTunnelAdminStatus
OBJECT-TYPE
This mib object represents the administrative status of tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.13INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsEncapTunnelDestResolvedPort
OBJECT-TYPE
This mib object represents the resolved port number to destination.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.14INTEGER (0..65535)read-onlycurrent
wwpLeosVplsEncapTunnelDestResolvedVlan
OBJECT-TYPE
This mib object represents the resolved transport vlan to destination.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.15INTEGER (0..4094)read-onlycurrent
wwpLeosVplsEncapTunnelRowStatus
OBJECT-TYPE
Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. Refer to description of wwpLeosVplsEncapTunnelTable for details of creating and deleting entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.16RowStatusread-createcurrent
wwpLeosVplsEncapTunnelFastReroute
OBJECT-TYPE
This object specifies if the backup tunnel should provide link or node protection. This object should only be specified if wwpLeosVplsEncapTunnelType = dynamic and wwpLeosVplsEncapTunnelLspType = backup. This object cannot be modified once created.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.17INTEGER {linkProtect(1), nodeProtect(2)}read-createcurrent
wwpLeosVplsEncapTunnelLspType
OBJECT-TYPE
This object specifies if the tunnel lsp is primary or backup tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.18INTEGER {primary(1), backup(2)}read-createcurrent
wwpLeosVplsEncapTunnelPartnerTunnelId
OBJECT-TYPE
This object specifies if the partner tunnel ID.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.19INTEGER (1..65535)read-onlycurrent
wwpLeosVplsEncapTunnelBVID
OBJECT-TYPE
This object specifies the provider backbone bridge vlan. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.20VlanIdread-createcurrent
wwpLeosVplsEncapTunnelDestBridgeIndex
OBJECT-TYPE
This object specifies the provider backbone bridge index. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored. This object must be set to one of the values specified by wwpLeosPbtBridgeNameMacMapIndex. If this object is set to 0 then this value will be ignored.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.21Integer32 (0..64)read-createcurrent
wwpLeosVplsEncapTunnelEgressPort
OBJECT-TYPE
This object specifies the provider backbone bridge port. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.22Integer32read-createcurrent
wwpLeosVplsEncapTunnelEncapFixedPCP
OBJECT-TYPE
This object specifies the encap fixed PCP assigned to this tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.23INTEGER (0..7)read-createcurrent
wwpLeosVplsEncapTunnelActive
OBJECT-TYPE
This object specifes if the tunnel is active, and it is only valid if TunnelType is staticPbt.
1.3.6.1.4.1.6141.2.60.28.1.1.13.1.24INTEGER {yes(1), no(2)}read-onlycurrent
wwpLeosVplsDecapTunnelTable
OBJECT-TYPE
This table represents the Decap tunnels for VPLS wwpLeosVplsDecapTunnelType If not set will default to static To create STATIC Decap tunnel following objects must be set Encap and Decap Tunnel name cannot be same but indexes can be wwpLeosVplsDecapTunnelName must be specified wwpLeosVplsDecapTunnelLabel must be specified (0, 32..1023) wwpLeosVplsDecapTunnelRowStatus must be set to createAndGo. To create STATIC Decap PBT tunnel following objects must be set Encap and Decap Tunnel name cannot be same but indexes can be wwpLeosVplsDecapTunnelType must be set to staticPbt wwpLeosVplsDecapTunnelName must be specified wwpLeosVplsDecapTunnelBVID must be specified wwpLeosVplsDecapTunnelBridgeIndex must be specified wwpLeosVplsDecapTunnelPort must be specified wwpLeosVplsDecapTunnelRowStatus must be set to createAndGo.
1.3.6.1.4.1.6141.2.60.28.1.1.14not-accessiblecurrent
wwpLeosVplsDecapTunnelEntry
OBJECT-TYPE
represents each entry in wwpLeosVplsDecapTunnelTable.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1not-accessiblecurrent
wwpLeosVplsDecapTunnelId
OBJECT-TYPE
This object specifies the unique index used in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsDecapTunnelName
OBJECT-TYPE
This object specfies the name assigned to the tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsDecapTunnelLabel
OBJECT-TYPE
This mib object specifies the Decap label assigned to this tunnel. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.3Unsigned32 (0..1048576)read-writecurrent
wwpLeosVplsDecapTunnelType
OBJECT-TYPE
This object specifies if the tunnel is created because of remote PE request (dynamic tunnel) or it is created by the user on the device (Decap tunnel). This object cannot be set to dynamic.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.4INTEGER {static(1), dynamic(2), staticPbt(3)}read-createcurrent
wwpLeosVplsDecapTunnelRowStatus
OBJECT-TYPE
Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. Refer to description of wwpLeosVplsDecapTunnelTable for details of creating and deleting entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.5RowStatusread-createcurrent
wwpLeosVplsDecapTunnelBVID
OBJECT-TYPE
This object specifies the provider bridge vlan ID expected in the mac in mac frames ingressing the device from provider bridge facing side.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.6Integer32read-createcurrent
wwpLeosVplsDecapTunnelBridgeIndex
OBJECT-TYPE
This object specifies the provider bridge host index which will be used to query wwpLeosPbtHostNameMacMapTable to find out corresponding mac address expected in the pbt frames ingressing the device from provider bridge facing side.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.7Integer32 (0..64)read-createcurrent
wwpLeosVplsDecapTunnelPort
OBJECT-TYPE
This object specifies the incoming port on which the pbt frames are expected.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.8Integer32read-createcurrent
wwpLeosVplsDecapTunnelMac
OBJECT-TYPE
This object specifies the source mac address expected in the pbt frames coming from provider network facing side. This mac address is derived from wwpLeosPbtHostNameMacMapTable table using the value specified by wwpLeosVplsDecapTunnelBridgeName.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.9MacAddressread-onlycurrent
wwpLeosVplsDecapTunnelOperStatus
OBJECT-TYPE
This object represents the operational status of tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.14.1.10INTEGER {enabled(1), disabled(2)}read-onlycurrent
wwpLeosVplsVirtualCircuitMplsTable
OBJECT-TYPE
The (conceptual) table listing the mpls virtual circuit table. To create entry use SNMP, multiple set operation must be used. Following Mib objects must be specified while creating MPLS virtual circuit Mpls and Ethernet virtual circuit name cannot be same but indexes can be - wwpLeosVplsVirtualCircuitMplsType must be set to dynamic - wwpLeosVplsVirtualCircuitMplsStatus must be set to createAndGo - wwpLeosVplsVirtualCircuitMplsName must be specified - wwpLeosVplsVirtualCircuitMplsDestAddr must be specified Following MIB objects must be specified while creating static MPLS virtual circuit - wwpLeosVplsVirtualCircuitMplsType must be set to static - wwpLeosVplsVirtualCircuitMplsStatus must be set to createAndGo - wwpLeosVplsVirtualCircuitMplsName must be specified - wwpLeosVplsVirtualCircuitMplsDestAddr must be specified - wwpLeosVplsVirtualCircuitMplsEncapLabel must be specified (2048..18431) - wwpLeosVplsVirtualCircuitMplsDecapLabel must be specified (2048..18431)
1.3.6.1.4.1.6141.2.60.28.1.1.15not-accessiblecurrent
wwpLeosVplsVirtualCircuitMplsEntry
OBJECT-TYPE
The virtual circuit table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitMplsIndex
OBJECT-TYPE
This represents the virtual circuit index in the table. This number should be unique in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualCircuitMplsName
OBJECT-TYPE
This represents the name of the virtual circuit associated with the given virtual circuit. Mpls and Ethernet virtual circuit name cannot be same but indexes can be.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsVirtualCircuitMplsType
OBJECT-TYPE
This represents the type of the virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.3INTEGER {dynamic(1), static(2)}read-createcurrent
wwpLeosVplsVirtualCircuitMplsDestAddr
OBJECT-TYPE
This represents the destination address used by the signaling protocol if wwpLeosVplsVirtualCircuitMplsType is set to dynamic. This object cannot be modified once entry is created.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.4IpAddressread-createcurrent
wwpLeosVplsVirtualCircuitMplsTunnelPolicy
OBJECT-TYPE
This object represents that this virtual circuit should select the tunnel as fixed or use the first active tunnel available on the outgoing port. If this object is set to fixed then wwpLeosVplsVirtualCircuitMplsTunnelIndx must be specified.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.5INTEGER {fixed(1), firstAvailable(2)}read-createcurrent
wwpLeosVplsVirtualCircuitMplsFixedTunnelId
OBJECT-TYPE
This represents the tunnel that this virtual circuit should be mapped to. This object is only used if wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set to fixed.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.6INTEGER (0..65535)read-createcurrent
wwpLeosVplsVirtualCircuitMplsActiveTunnelId
OBJECT-TYPE
This represents the tunnel that this virtual circuit is currently using. This object is equal to wwpLeosVplsVirtualCircuitMplsFixedTunnelId if wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set to fixed.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.7INTEGER (0..65535)read-onlycurrent
wwpLeosVplsVirtualCircuitMplsOperStatus
OBJECT-TYPE
This represents the operational status of the virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.8INTEGER {enabled(1), disabled(2)}read-onlycurrent
wwpLeosVplsVirtualCircuitMplsEncapLabel
OBJECT-TYPE
If wwpLeosVplsVirtualCircuitMplsType is set to static then this object specifies the encap label the should be used for this virtual circuit. Label should be in the range 2048..18431. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.9Unsigned32 (0..1048576)read-createcurrent
wwpLeosVplsVirtualCircuitMplsDecapLabel
OBJECT-TYPE
If wwpLeosVplsVirtualCircuitMplsType is set to static then this object specifies the decap label the should be used for this virtual circuit. Label should be in the range 2048..18431. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.10Unsigned32 (0..1048576)read-createcurrent
wwpLeosVplsVirtualCircuitMplsGroupId
OBJECT-TYPE
This represents the group ID advertised in the LDP signaling if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.11Unsigned32read-createcurrent
wwpLeosVplsVirtualCircuitMplsProtectionType
OBJECT-TYPE
This represents that this virtual circuit is primary or secondary virtual circuit. If primary virtual circuit goes down that secondary virtual circuit will be used.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.12INTEGER {primary(1), secondary(2)}read-createcurrent
wwpLeosVplsVirtualCircuitMplsStatusTlv
OBJECT-TYPE
Specifies whether the Status TLV in LDP signaling should be advertised or not. This mib object is only used if wwpLeosVplsVirtualCircuitMplsType is set to dynamic. This field cannot be modified while wwpLeosVplsVirtualCircuitMplsStatus is active
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.13TruthValueread-createcurrent
wwpLeosVplsVirtualCircuitMplsMtu
OBJECT-TYPE
Setting this object will set the MTU for this VC. This MTU is advertised to the peer if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.14INTEGER (1500..9216)read-writecurrent
wwpLeosVplsVirtualCircuitMplsStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.15.1.15RowStatusread-createcurrent
wwpLeosVplsVirtualCircuitMplsStatsTable
OBJECT-TYPE
The (conceptual) table listing the mpls virtual circuit stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.16not-accessiblecurrent
wwpLeosVplsVirtualCircuitMplsStatsEntry
OBJECT-TYPE
The mpls virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.16.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitMplsTxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsTxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given mpls virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.3Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.16.1.4Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthTable
OBJECT-TYPE
The (conceptual) table listing the virtual circuit table. To create entry use SNMP, multiple set operation must be usedd because following mib objects needs to be set while creating entry in the table. Mpls and Ethernet virtual circuit name cannot be same but indexes can be - wwpLeosVplsVirtualCircuitEthName must be specified - wwpLeosVplsVirtualCircuitEthProviderVlanId must be specified and must exist on the device. - wwpLeosVplsVirtualCircuitEthStatus must be specified.
1.3.6.1.4.1.6141.2.60.28.1.1.17not-accessiblecurrent
wwpLeosVplsVirtualCircuitEthEntry
OBJECT-TYPE
The virtual circuit table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.17.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitEthIndex
OBJECT-TYPE
This represents the virtual circuit index in the table. This number should be unique in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualCircuitEthName
OBJECT-TYPE
This represents the name of the virtual circuit associated with the given virtual circuit. Mpls and Ethernet virtual circuit name cannot be same but indexes can be
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsVirtualCircuitEthProviderVlanId
OBJECT-TYPE
This represents the provider vlan id associated with the virtual circuit for a given wwpLeosVplsVirtualCircuitMplsIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.3VlanIdread-writecurrent
wwpLeosVplsVirtualCircuitEthRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy' If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.4RowStatusread-createcurrent
wwpLeosVplsVirtualCircuitEthStatsMonitor
OBJECT-TYPE
To disable stats collection, set this object to off(2). To enable stats collection, set this object to on(1).
1.3.6.1.4.1.6141.2.60.28.1.1.17.1.5INTEGER {on(1), off(2)}read-createcurrent
wwpLeosVplsVirtualCircuitEtherTypeTable
OBJECT-TYPE
The (conceptual) table listing the ether type to be used for each port.
1.3.6.1.4.1.6141.2.60.28.1.1.18not-accessiblecurrent
wwpLeosVplsVirtualCircuitEtherTypeEntry
OBJECT-TYPE
The entry to assign ether type for each port.
1.3.6.1.4.1.6141.2.60.28.1.1.18.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitPortId
OBJECT-TYPE
This object specifies the port number used as index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.18.1.1INTEGER (1..65535)read-writecurrent
wwpLeosVplsVirtualCircuitEtherType
OBJECT-TYPE
This object specifies the ethertype of the outer VLAN tag for given port.
1.3.6.1.4.1.6141.2.60.28.1.1.18.1.2INTEGER {type8100(1), type9100(2), type88A8(3)}read-writecurrent
wwpLeosVplsVirtualCircuitEtherTypePolicy
OBJECT-TYPE
This object specifies the policy for the ethertype of the outer VLAN tag for given port. All means all frames will have the type set in wwpLeosVplsVirtualCircuitEtherType. encapOnly means only Q-in-Q encapsulated frames will use that value. If wwpLeosVplsVirtualCircuitEtherType is set to type 8100 then ALL will always be the operational value for this item. vlanTpid means that the port will use the TPID configured for the vlan at egress.
1.3.6.1.4.1.6141.2.60.28.1.1.18.1.3INTEGER {all(1), encapOnly(2), vlanTpid(3)}read-writecurrent
wwpLeosVplsVirtualCircuitEthStatsTable
OBJECT-TYPE
The (conceptual) table listing the virtual circuit stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.19not-accessiblecurrent
wwpLeosVplsVirtualCircuitEthStatsEntry
OBJECT-TYPE
The ethernet virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.19.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitEthTxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthTxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.3Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.4Counter32read-onlycurrent
wwpLeosVirtualCircuitEthStatsClear
OBJECT-TYPE
To clear the statistics for the given virtual circuit, set this object to clear(1)
1.3.6.1.4.1.6141.2.60.28.1.1.19.1.5INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsTable
OBJECT-TYPE
This table is used to manage virtual switch entries on the device.
1.3.6.1.4.1.6141.2.60.28.1.1.20not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsEntry
OBJECT-TYPE
This entry corresponds to single entry in wwpLeosVplsVirtualSwitchMplsTable table. To create an entry in the table following criteria must be met. Mpls and Ethernet virtual switch name cannot be same but indexes can be - wwpLeosVplsVirtualSwitchMplsVpnId must be specified. - wwpLeosVplsVirtualSwitchMplsType must be specified. - wwpLeosVplsVirtualSwitchMplsName must be specified. - wwpLeosVplsVirtualSwitchMplsStatus must be specified.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsIndx
OBJECT-TYPE
This object specifies the virtual switch index which is used as unique index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchMplsName
OBJECT-TYPE
This object specifies the virtual switch name. this object can only be specified at the time of creation and cannot be modified later. Mpls and Ethernet virtual switch name cannot be same but indexes can be.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.2DisplayString (SIZE(1..31))read-writecurrent
wwpLeosVplsVirtualSwitchMplsVpnId
OBJECT-TYPE
This object specifies the subscriber vlan Id for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.3Unsigned32read-writecurrent
wwpLeosVplsVirtualSwitchMplsEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.4INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsEncapFixedDot1dPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.5INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchMplsDecapCosPolicy
OBJECT-TYPE
This object specifies the egress cos policy for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.6INTEGER {fixed(1), inheritVc(2), inheritTunnel(3), leave(4)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsDecapFixedDot1dPri
OBJECT-TYPE
This object specifies the egress cos attributes for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.7INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchMplsCtrlProtocolTunnelState
OBJECT-TYPE
This object enables or disables control protocol tunneling for a given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsDecapTTLPolicy
OBJECT-TYPE
This object specifies the TTL policy for a given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.9INTEGER {pipe(1), uniform(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsType
OBJECT-TYPE
This object specifies the type of virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.10INTEGER {static(1), dynamic(2)}read-createcurrent
wwpLeosVplsVirtualSwitchMplsRowStatus
OBJECT-TYPE
This object can be set to 'createAndGo' to create entry in the table. This object can be set to 'destroy' to delete entry in the table. Following objects must be set to valid values to create entry in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.11RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchMplsMacLrnState
OBJECT-TYPE
Setting this object will set the Mac learning state for a given mpls virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.12INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsTunnelMethod
OBJECT-TYPE
Setting this object will set the tunneling method for a given mpls virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.13INTEGER {l2pt(1), transparent(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsCtrlProtocolDot1dPri
OBJECT-TYPE
This object specifies the .1d priority to use when encapsulation control frames.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.14INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchMplsSubscriberDot1dPolicy
OBJECT-TYPE
Setting this object will configure the policy used to decide whether or not the subscriber frame .1d priorty should be left alone, or remarked to the computed provider priority.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.15INTEGER {leave(1), provider-inherit(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsCtrlProtTransFrameValidate
OBJECT-TYPE
Setting this object will set the transparent-mode validate for a given mpls virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.16INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsHonorPriority
OBJECT-TYPE
Setting this object will select either the c-vlan or s-vlan priority to use through the Virtual Switch and it's associated MPLS Tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.20.1.17INTEGER {c-vlan(1), s-vlan(2)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsMemberTable
OBJECT-TYPE
This table is used to create mpls virtual switch subscriber port-vlan membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.21not-accessibledeprecated
wwpLeosVplsVirtualSwitchMplsMemberEntry
OBJECT-TYPE
This entry corresponds to single port-vlan subscriber entry in wwpLeosVplsVirtualSwitchMplsMemberTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.21.1not-accessibledeprecated
wwpLeosVplsVirtualSwitchMplsMemberPortId
OBJECT-TYPE
This object specifies the port number which is to be added as a customer facing port for the mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx.
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.1INTEGER (1..65535)read-createcurrent
wwpLeosVplsVirtualSwitchMplsMemberVlanId
OBJECT-TYPE
This object specifies the subscriber vlan attached to this mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx. This object cannot be modified one entry is created in this table. This object can only be specified when creating entries in this table.
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.2INTEGER (0..4094)read-createcurrent
wwpLeosVplsVirtualSwitchMplsMemberRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.3RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchMplsMemberEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given member entry. By default 'inheritVs' the encap CoS policy is inherited from the parent virtual-switch settings
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.4INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4), inheritVs(5), port-inherit(6)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsMemberEncapCosFixedDot1DPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the member EncapCosPolicy is set to 'fixed'
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.5INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchMplsMemberSubscriberDot1dPolicy
OBJECT-TYPE
This object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switch
1.3.6.1.4.1.6141.2.60.28.1.1.21.1.6INTEGER {leave(1), provider-inherit(2), inheritVs(3)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsMemberStatsTable
OBJECT-TYPE
The (conceptual) table listing the virtual switch member stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.22not-accessibledeprecated
wwpLeosVplsVirtualSwitchMplsMemberStatsEntry
OBJECT-TYPE
The virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchMplsIndx and wwpLeosVplsVirtualSwitchMplsMemberPortId.
1.3.6.1.4.1.6141.2.60.28.1.1.22.1not-accessibledeprecated
wwpLeosVplsVirtualSwitchMplsMemberRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given mpls virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.22.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchMplsMemberRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.22.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchMplsMemberMeshVcTable
OBJECT-TYPE
This table is used to create mpls virtual switch mesh-vc membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.23not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsMemberMeshVcEntry
OBJECT-TYPE
This entry corresponds to single mesh-vc entry in wwpLeosVplsVirtualSwitchMplsMemberMeshVcTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.23.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsMemberMeshVcMeshVc
OBJECT-TYPE
This object specifies the mesh virtual circuit for this mpls virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.23.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchMplsMemberMeshVcRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.23.1.2RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchMplsMemberAcVcTable
OBJECT-TYPE
This table is used to create mpls virtual switch mesh-vc membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.24not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsMemberAcVcEntry
OBJECT-TYPE
This entry corresponds to single mesh-vc entry in wwpLeosVplsVirtualSwitchMplsMemberAcVcTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.24.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsMemberAcVcAcVc
OBJECT-TYPE
This object specifies the attachment virtual circuit for this mpls virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.24.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchMplsMemberAcVcRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.24.1.2RowStatusread-createcurrent
wwpLeosVplsSwitchMplsCtrlProtocolTable
OBJECT-TYPE
The (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.
1.3.6.1.4.1.6141.2.60.28.1.1.25not-accessiblecurrent
wwpLeosVplsSwitchMplsCtrlProtocolEntry
OBJECT-TYPE
The layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
1.3.6.1.4.1.6141.2.60.28.1.1.25.1not-accessiblecurrent
wwpLeosVplsSwitchMplsCtrlProtocolNum
OBJECT-TYPE
This object represent the list of protocols the device can support.
1.3.6.1.4.1.6141.2.60.28.1.1.25.1.1INTEGER {l28021x(1), rstp(2), ciscoCdp(3), ciscoDtp(4), ciscoPagp(5), ciscoPvst(6), ciscoUplinkFast(7), ciscoUdlp(8), ciscoVtp(9), gvrp(10), lacp(11), lacpMarker(12), oam(13), lldp(14), vlanBridge(15)}read-onlycurrent
wwpLeosVplsSwitchMplsCtrlType
OBJECT-TYPE
Setting this object to 'discard' will cause wwpLeosVplsSwitchMplsCtrlProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosVplsSwitchMplsCtrlProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosVplsSwitchMplsCtrlProtocolNum frame to be tunneled.
1.3.6.1.4.1.6141.2.60.28.1.1.25.1.2INTEGER {discard(1), peer(2), tunnel(3)}read-createcurrent
wwpLeosVplsVirtualSwitchEthTable
OBJECT-TYPE
This table is used to manage virtual switch entries on the device.
1.3.6.1.4.1.6141.2.60.28.1.1.26not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthEntry
OBJECT-TYPE
This entry corresponds to single entry in wwpLeosVplsVirtualSwitchEthernetTable table. To create an entry in the table following criteria must be met. - wwpLeosVplsVirtualSwitchEthRowStatus must be specified. - wwpLeosVplsVirtualSwitchEthernetName must be specified
1.3.6.1.4.1.6141.2.60.28.1.1.26.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthIndx
OBJECT-TYPE
This object specifies the virtual switch index which is used as unique index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchEthName
OBJECT-TYPE
This object specifies the virtual switch name. this object can only be specified at the time of creation and cannot be modified later. Mpls and Ethernet virtual switch name cannot be same but indexes can be.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsVirtualSwitchEthVc
OBJECT-TYPE
This object specifies the primary virtual circuit ID associated with this virtual switch. To unset it set this to 0. If this object represents PBT virtual circuit then wwpLeosVplsVirtualSwitchEthVcType must also be set to pbt.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.3INTEGER (0..65535)read-createcurrent
wwpLeosVplsVirtualSwitchEthEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.4INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4), port-inherit(5)}read-writecurrent
wwpLeosVplsVirtualSwitchEthEncapFixedDot1dPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.5INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchEthDecapCosPolicy
OBJECT-TYPE
This object specifies the egress cos policy for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.6INTEGER {fixed(1), inheritVc(2), inheritTunnel(3), leave(4)}read-writecurrent
wwpLeosVplsVirtualSwitchEthDecapFixedDot1dPri
OBJECT-TYPE
This object specifies the egress cos attributes for given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.7INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchEthCtrlProtocolTunnelState
OBJECT-TYPE
This object enables or disables control protocol tunneling for a given virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.8INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsVirtualSwitchEthRowStatus
OBJECT-TYPE
This object can be set to 'createAndGo' to create entry in the table. This object can be set to 'destroy' to delete entry in the table. Following objects must be set to valid values to create entry in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.9RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchEthMacLrnState
OBJECT-TYPE
Setting this object will set the Mac learning state for each ethernet virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.10INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsVirtualSwitchEthTunnelMethod
OBJECT-TYPE
Setting this object will set the tunneling method for each ethernet virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.11INTEGER {l2pt(1), transparent(2)}read-writecurrent
wwpLeosVplsVirtualSwitchEthCtrlProtocolDot1dPri
OBJECT-TYPE
This object specifies the .1d priority to use when encapsulation control frames.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.12INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchEthSubscriberDot1dPolicy
OBJECT-TYPE
Setting this object will configure the policy used to decide whether or not the subscriber frame .1d priorty should be left alone, or remarked to the computed provider priority.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.13INTEGER {leave(1), provider-inherit(2)}read-writecurrent
wwpLeosVplsVirtualSwitchEthCtrlProtTransFrameValidate
OBJECT-TYPE
Setting this object will set the transparent-mode validate for a given eth virtual switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.14INTEGER {enabled(1), disabled(2)}read-writecurrent
wwpLeosVplsVirtualSwitchEthVcType
OBJECT-TYPE
This object specifies the type of vc to be attached to this virtual switch. This object must be set (using SNMP multiple set operation) to pbt type if wwpLeosVplsVirtualSwitchEthVc specifies the pbt vc. Setting only wwpLeosVplsVirtualSwitchEthVcType will return error. Also setting wwpLeosVplsVirtualSwitchEthVcType to none will return error.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.15INTEGER {none(1), ethernet(2), pbt(3)}read-createcurrent
wwpLeosVplsVirtualSwitchEthHonorPriority
OBJECT-TYPE
This object specifies which Vlan priority to use on a Virtual Switch. Honor either the c-vlan or the s-vlan priority through the Virtual Switch and it's associated VC or Tunnel.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.16INTEGER {c-vlan(1), s-vlan(2)}read-writecurrent
wwpLeosVplsVirtualSwitchEthDescription
OBJECT-TYPE
This object specifies the virtual switch description.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.17OCTET STRING (SIZE(0..128))read-writecurrent
wwpLeosVplsVirtualSwitchEthReservedVlan
OBJECT-TYPE
Reserved vlan for the virtual-switch.
1.3.6.1.4.1.6141.2.60.28.1.1.26.1.18INTEGER (1..4094)read-createcurrent
wwpLeosVplsVirtualSwitchEthMemberTable
OBJECT-TYPE
This table is used to create virtual switch membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.27not-accessibledeprecated
wwpLeosVplsVirtualSwitchEthMemberEntry
OBJECT-TYPE
This entry corresponds to single entry in wwpLeosVplsVirtualSwitchEthernetMemberTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.27.1not-accessibledeprecated
wwpLeosVplsVirtualSwitchEthMemberPortId
OBJECT-TYPE
This object specifies the port id associated with wwpLeosVplsVirtualSwitchEthIndx.
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchEthMemberVlan
OBJECT-TYPE
This object specifies the subscriber vlan attached to this eth virtual switch index wwpLeosVplsVirtualSwitchEthIndx. This object cannot be modified one entry is created. This object can only be specified when entry is created in this table.
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.2INTEGER (0..4094)read-createcurrent
wwpLeosVplsVirtualSwitchEthMemberRowStatus
OBJECT-TYPE
This object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.3RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchEthMemberEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given member entry.
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.4INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4), inheritVs(5), port-inherit(6)}read-writecurrent
wwpLeosVplsVirtualSwitchEthMemberEncapCosFixedDot1DPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.5INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchEthMemberSubscriberDot1dPolicy
OBJECT-TYPE
This object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switch
1.3.6.1.4.1.6141.2.60.28.1.1.27.1.6INTEGER {leave(1), provider-inherit(2), inheritVs(3)}read-writecurrent
wwpLeosVplsVirtualSwitchEthMemberStatsTable
OBJECT-TYPE
The (conceptual) table listing the virtual switch member stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.28not-accessibledeprecated
wwpLeosVplsVirtualSwitchEthMemberStatsEntry
OBJECT-TYPE
The virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchEthIndx and wwpLeosVplsVirtualSwitchEthMemberPortId.
1.3.6.1.4.1.6141.2.60.28.1.1.28.1not-accessibledeprecated
wwpLeosVplsVirtualSwitchEthMemberRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.28.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchEthMemberRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.28.1.2Counter32read-onlycurrent
wwpLeosVplsSwitchEthCtrlProtocolTable
OBJECT-TYPE
The (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.
1.3.6.1.4.1.6141.2.60.28.1.1.29not-accessiblecurrent
wwpLeosVplsSwitchEthCtrlProtocolEntry
OBJECT-TYPE
The layer 2 virtual switch control frame protocol tunnel entry for the Vpls.
1.3.6.1.4.1.6141.2.60.28.1.1.29.1not-accessiblecurrent
wwpLeosVplsSwitchEthCtrlProtocolNum
OBJECT-TYPE
This object represent the list of protocols the device can support.
1.3.6.1.4.1.6141.2.60.28.1.1.29.1.1INTEGER {l28021x(1), rstp(2), ciscoCdp(3), ciscoDtp(4), ciscoPagp(5), ciscoPvst(6), ciscoUplinkFast(7), ciscoUdlp(8), ciscoVtp(9), gvrp(10), lacp(11), lacpMarker(12), oam(13), lldp(14), vlanBridge(15)}read-onlycurrent
wwpLeosVplsSwitchEthCtrlType
OBJECT-TYPE
Setting this object to 'discard' will cause wwpLeosVplsSwitchEthCtrlProtocolNum frames arriving at the specified UNI to be discarded. Setting this to 'peer' will cause the wwpLeosVplsSwitchEthCtrlProtocolNum frame to be processed by the provider network and cause the provider network to behave as a peer. Setting this to 'tunnel' will cause the wwpLeosVplsSwitchEthCtrlProtocolNum frame to be tunneled.
1.3.6.1.4.1.6141.2.60.28.1.1.29.1.2INTEGER {discard(1), peer(2), tunnel(3)}read-createcurrent
wwpLeosVplsVirtualSwitchEtypeTranslationTable
OBJECT-TYPE
This table controls the global Ethertype translation functions. Only two entries are allowed. Creating more than two entries will return an error. The control is bi-directional. Creating one entry will enable translation as the packet egresses the NNI and as it egresses the UNI port.
1.3.6.1.4.1.6141.2.60.28.1.1.30not-accessiblecurrent
wwpLeosVplsVirtualSwitchEtypeTranslationEntry
OBJECT-TYPE
Each entry contains the Ethertype being translated and the new Ethertype that will be copied over the old Ethertype.
1.3.6.1.4.1.6141.2.60.28.1.1.30.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchEtypeTranslationOriginalEtype
OBJECT-TYPE
This object represent the original Ethertype of the frame.
1.3.6.1.4.1.6141.2.60.28.1.1.30.1.1EtherTyperead-onlycurrent
wwpLeosVplsVirtualSwitchEtypeTranslationMappedEtype
OBJECT-TYPE
This object represent the Ethertype that will be stamped on the frame on egress and removed on ingress.
1.3.6.1.4.1.6141.2.60.28.1.1.30.1.2EtherTyperead-createcurrent
wwpLeosVplsVirtualSwitchEtypeTranslationRowStatus
OBJECT-TYPE
This object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.30.1.3RowStatusread-createcurrent
wwpLeosVplsTunnelPairTable
OBJECT-TYPE
This table allows creating tunnel pairs. Having a tunnel pair will force the device to accept pbt encapsulated frames on given pair of tunnels ports and not on any port. This table is only accessible in PBT mode.
1.3.6.1.4.1.6141.2.60.28.1.1.31not-accessiblecurrent
wwpLeosVplsTunnelPairEntry
OBJECT-TYPE
Each entry contains the tunnel pair.
1.3.6.1.4.1.6141.2.60.28.1.1.31.1not-accessiblecurrent
wwpLeosVplsTunnelPairIndx
OBJECT-TYPE
This object represent the index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.1INTEGER (1..65535)not-accessiblecurrent
wwpLeosVplsTunnelPairName
OBJECT-TYPE
This object represent the name of the pair and must be unique. This object cannot be modified once entry is created.
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.2DisplayString (SIZE(1..31))read-createcurrent
wwpLeosVplsTunnelPairEncapTunnelIndx
OBJECT-TYPE
This object represent the encap tunnel that is part of this tunnel pair. This tunnel index should be valid and must exist in wwpLeosVplsEncapTunnelTable. This object cannot be modified once entry is created.
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.3Integer32read-createcurrent
wwpLeosVplsTunnelPairDecapTunnelIndx
OBJECT-TYPE
This object represent the decap tunnel that is part of this tunnel pair. This tunnel index should be valid and must exist in wwpLeosVplsDecapTunnelTable. This object cannot be modified once entry is created.
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.4Integer32read-createcurrent
wwpLeosVplsTunnelPairRowStatus
OBJECT-TYPE
This object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.31.1.5RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberTable
OBJECT-TYPE
This table is used to create mpls virtual switch subscriber port-vlan membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.32not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberEntry
OBJECT-TYPE
This entry corresponds to single port-vlan subscriber entry in wwpLeosVplsVirtualSwitchMplsEvplMemberTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.32.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberPortId
OBJECT-TYPE
This object specifies the port number which is to be added as a customer facing port for the mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx.
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.1INTEGER (1..65535)read-createcurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberVlanId
OBJECT-TYPE
This object specifies the subscriber vlan attached to this mpls virtual switch index wwpLeosVplsVirtualSwitchMplsIndx. This object cannot be modified once entry is created in this table. This object can only be specified when creating entries in this table.
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.2INTEGER (0..4094)read-createcurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.3RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given EVPL entry.
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.4INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4), inheritVs(5), port-inherit(6)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberEncapFixedDot1dPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.5INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberSubscriberDot1dPolicy
OBJECT-TYPE
This object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switch
1.3.6.1.4.1.6141.2.60.28.1.1.32.1.6INTEGER {leave(1), provider-inherit(2), inheritVs(3)}read-writecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsTable
OBJECT-TYPE
The (conceptual) table listing the virtual switch member stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.33not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsEntry
OBJECT-TYPE
The virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchMplsIndx, wwpLeosVplsVirtualSwitchMplsMemberPortId and VlanId.
1.3.6.1.4.1.6141.2.60.28.1.1.33.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given mpls virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.33.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchMplsEvplMemberRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.33.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchEthEvplMemberTable
OBJECT-TYPE
This table is used to create virtual switch membership entry.
1.3.6.1.4.1.6141.2.60.28.1.1.34not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberEntry
OBJECT-TYPE
This entry corresponds to single entry in wwpLeosVplsVirtualSwitchEthernetEvplMemberTable table.
1.3.6.1.4.1.6141.2.60.28.1.1.34.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberPortId
OBJECT-TYPE
This object specifies the port id associated with wwpLeosVplsVirtualSwitchEthIndx.
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchEthEvplMemberVlan
OBJECT-TYPE
This object specifies the subscriber vlan attached to this eth virtual switch index wwpLeosVplsVirtualSwitchEthIndx. This object cannot be modified one entry is created. This object can only be specified when entry is created in this table.
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.2INTEGER (0..4095)read-createcurrent
wwpLeosVplsVirtualSwitchEthEvplMemberRowStatus
OBJECT-TYPE
This object can be set to 'createandgo' to add entry in the table. This object can be set to 'destroy' to delete entry in the table. Refer to description of table entry to see how to create entries in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.3RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchEthEvplMemberEncapCosPolicy
OBJECT-TYPE
This object specifies the ingress cos policy for given EVPL entry.
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.4INTEGER {fixed(1), inheritDot1dPri(2), inheritIpPrec(3), inheritPhbg(4), inheritVs(5), port-inherit(6)}read-writecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberEncapFixedDot1dPri
OBJECT-TYPE
This object specifies the ingress fixed cos attributes for given member entry. This attribute is only valid when the EncapCosPolicy is set to 'fixed'
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.5INTEGER (0..7)read-writecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberSubscriberDot1dPolicy
OBJECT-TYPE
This object configures the member policy used to decide if the subscriber frame's 'c-vlan' .1d priorty should be left alone 'leave', or remarked 'provider-inherit' to the resolved provider 's-vlan' priority. This attribute is valid when the member's SubscriberDot1Policy is 'leave' or 'provider-inherit'. If stt to 'inheritVs' the attribute is inherited from the parent virtual-switch
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.6INTEGER {leave(1), provider-inherit(2), inheritVs(3)}read-writecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberTranslateTag
OBJECT-TYPE
Subscriber VLAN translate stamp.
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.7INTEGER (1..4094)read-createcurrent
wwpLeosVplsVirtualSwitchEthEvplMemberServiceVlanTpid
OBJECT-TYPE
This object specifies the service VLAN TPID.It is currently only applicable for VS instances associated with an MPLS enabled VS
1.3.6.1.4.1.6141.2.60.28.1.1.34.1.8INTEGER {tpid8100(1), tpid9100(2), tpid88A8(3), none(99)}read-createcurrent
wwpLeosVplsVirtualSwitchEthEvplMemberStatsTable
OBJECT-TYPE
The (conceptual) table listing the virtual switch member stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.35not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberStatsEntry
OBJECT-TYPE
The virtual switch member stats table entry index by wwpLeosVplsVirtualSwitchEthIndx, wwpLeosVplsVirtualSwitchEthMemberPortId and VlanId.
1.3.6.1.4.1.6141.2.60.28.1.1.35.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.35.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchEthEvplMemberRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual switch member port.
1.3.6.1.4.1.6141.2.60.28.1.1.35.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthTotalStatsTable
OBJECT-TYPE
The (conceptual) table listing the virtual circuit stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.36not-accessiblecurrent
wwpLeosVplsVirtualCircuitEthTotalStatsEntry
OBJECT-TYPE
The ethernet virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.36.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitEthTotalTxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthTotalTxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthTotalRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.3Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitEthTotalRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.36.1.4Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsTotalStatsTable
OBJECT-TYPE
The (conceptual) table listing the mpls virtual circuit stats table.
1.3.6.1.4.1.6141.2.60.28.1.1.37not-accessiblecurrent
wwpLeosVplsVirtualCircuitMplsTotalStatsEntry
OBJECT-TYPE
The mpls virtual circuit stats table entry index by wwpLeosVplsVirtualCircuitMplsTotalIndex.
1.3.6.1.4.1.6141.2.60.28.1.1.37.1not-accessiblecurrent
wwpLeosVplsVirtualCircuitMplsTotalTxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.1Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsTotalTxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits transmitted for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsTotalRxBytesHi
OBJECT-TYPE
This represents the total number of higher 32 bits received for given mpls virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.3Counter32read-onlycurrent
wwpLeosVplsVirtualCircuitMplsTotalRxBytesLo
OBJECT-TYPE
This represents the total number of lower 32 bits received for given virtual circuit.
1.3.6.1.4.1.6141.2.60.28.1.1.37.1.4Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchEthL2CftProtocolTable
OBJECT-TYPE
Table of Virtual Switch L2 CFT protocols.
1.3.6.1.4.1.6141.2.60.28.1.1.49not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthL2CftProtocolEntry
OBJECT-TYPE
Virtual Switch L2CFT protocol entry in the Virtual Switch L2CFT Protocol Table.
1.3.6.1.4.1.6141.2.60.28.1.1.49.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthL2CftProtocolType
OBJECT-TYPE
This object specifies a unique protocol type-index into the table.
1.3.6.1.4.1.6141.2.60.28.1.1.49.1.1INTEGER {ciscoCdp(1), ciscoDtp(2), ciscoPagp(3), ciscoUdld(4), ciscoVtp(5), ciscoPvst(6), ciscoStpUplinkFast(7), vlanBridge(8), rstp(9), lacp(10), lacpMarker(11), oam(12), lldp(13), i8021x(14), gmrp(15), gvrp(16), brigeBlock(32), allBridgesBlock(33), garpBlock(34), unknown(99)}not-accessiblecurrent
wwpLeosVplsVirtualSwitchEthL2CftProtocolDisposition
OBJECT-TYPE
This object specifies the virtual switch L2 CFT protocol action. May forward or drop frames that match this protocol at the virtual switch + RLAN layer
1.3.6.1.4.1.6141.2.60.28.1.1.49.1.2INTEGER {forward(1), discard(2)}read-createcurrent
wwpLeosVplsVirtualSwitchEthL2CftProtocolRowStatus
OBJECT-TYPE
To create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to destroy. To update this entry this object may not be set.
1.3.6.1.4.1.6141.2.60.28.1.1.49.1.64RowStatusread-createcurrent
wwpLeosVplsVirtualSwitchCFTProtoStatsTable
OBJECT-TYPE
The (conceptual) table listing the l2 control frame protocol stats for a given vlan.
1.3.6.1.4.1.6141.2.60.28.1.1.50not-accessiblecurrent
wwpLeosVplsVirtualSwitchCFTProtoStatsEntry
OBJECT-TYPE
The layer 2 control frame protocol stats entry for the vlan.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchCFTProtoStatsEntryVirtualSwitchIndx
OBJECT-TYPE
This object specifies the virtual switch index which is used as unique index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2RxPkts
OBJECT-TYPE
Specifies number of packets ingressed matching protocol.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2TunneledPkts
OBJECT-TYPE
Specifies the number of packets that were made tunneled.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.3Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2PeerPkts
OBJECT-TYPE
Specifies the number of peered packets.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.4Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2DiscardedPkts
OBJECT-TYPE
Specifies the number of discarded packets.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.5Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2DecodedPkts
OBJECT-TYPE
Specifies the number of packets that came in tunneled and then restored.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.6Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2DecodedFailures
OBJECT-TYPE
Specifies the number of packets that failed to 'untunnel'.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.7Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2TunneledSubcriberPortPkts
OBJECT-TYPE
Specifies the number of tunneled packets received on subscriber port..
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.8Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtol2ProtocolNum
OBJECT-TYPE
This object represent the list of protocols supported by the device.
1.3.6.1.4.1.6141.2.60.28.1.1.50.1.9INTEGER {l28021x(1), rstp(2), ciscoCdp(3), ciscoDtp(4), ciscoPagp(5), ciscoPvst(6), ciscoUplinkFast(7), ciscoUdlp(8), ciscoVtp(9), gvrp(10), lacp(11), lacpMarker(12), lldp(13), oam(14), vlanBridge(15)}read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsTable
OBJECT-TYPE
The (conceptual) table listing the l2 control frame protocol stats for a given vlan.
1.3.6.1.4.1.6141.2.60.28.1.1.51not-accessiblecurrent
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntry
OBJECT-TYPE
The layer 2 control frame protocol stats entry for the vlan.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1not-accessiblecurrent
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsEntryVirtualSwitchIndx
OBJECT-TYPE
This object specifies the virtual switch index which is used as unique index in the table.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2RxPkts
OBJECT-TYPE
Specifies number of packets ingressed matching protocol.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.2Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledPkts
OBJECT-TYPE
Specifies the number of packets that were made tunneled.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.3Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2PeerPkts
OBJECT-TYPE
Specifies the number of peered packets.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.4Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2DiscardedPkts
OBJECT-TYPE
Specifies the number of discarded packets.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.5Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedPkts
OBJECT-TYPE
Specifies the number of packets that came in tunneled and then restored.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.6Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2DecodedFailures
OBJECT-TYPE
Specifies the number of packets that failed to 'untunnel'.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.7Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2TunneledSubcriberPortPkts
OBJECT-TYPE
Specifies the number of tunneled packets received on subscriber port..
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.8Counter32read-onlycurrent
wwpLeosVplsVirtualSwitchCFTProtoTotall2ProtocolNum
OBJECT-TYPE
This object represent the list of protocols supported by the device.
1.3.6.1.4.1.6141.2.60.28.1.1.51.1.9INTEGER {l28021x(1), rstp(2), ciscoCdp(3), ciscoDtp(4), ciscoPagp(5), ciscoPvst(6), ciscoUplinkFast(7), ciscoUdlp(8), ciscoVtp(9), gvrp(10), lacp(11), lacpMarker(12), lldp(13), oam(14), vlanBridge(15)}read-onlycurrent
wwpLeosVplsMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.2
wwpLeosVplsMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.2.0
wwpLeosVplsMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.3
wwpLeosVplsMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.3.1
wwpLeosVplsMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.28.3.2