MIBs Depot

WWP-LEOS-SYSTEM-CONFIG-MIB

Registered at
1.3.6.1.4.1.6141.2.60.12
Last updated
2015-08-20 00:00
Organization
Ciena, Inc
Revisions
2015-08-20 00:00, 2015-07-17 00:00, 2015-06-22 00:00, 2015-01-21 00:00, 2014-11-10 00:00, 2014-10-15 00:00, 2014-07-15 00:00, 2013-04-23 00:00, 2012-10-30 00:00, 2012-09-19 00:00, 2012-07-06 00:00, 2012-06-27 00:00, 2012-04-16 00:00, 2011-11-05 00:00, 2011-07-05 00:00, 2002-03-16 00:00
Namespace
ciena
Source file
WWP-LEOS-SYSTEM-CONFIG-MIB
Digest
sha256:10be7e12151cfb26eb2138839f6fd19749ef8877af431a5dde56acc9e7ecc9ad

Description

The MIB module for the WWP System Config information.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDateAndTime, DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue
WWP-SMIwwpModulesLeos

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WWP-LEOS-SYSTEM-CONFIG-MIB
WWP-SMI

Textual conventions

NameOIDSyntaxAccessStatus
FileName
TEXTUAL-CONVENTION
Represents the textual convention which defines the name string and display hint
current
SystemClientAdminState
TEXTUAL-CONVENTION
This textual convention enumerates the administration state of a system FTP/TFTP client.
current
SystemServerAdminState
TEXTUAL-CONVENTION
This textual convention enumerates the administration state of a system FTP/SFTP/TFTP server.
current

Objects

NameOIDSyntaxAccessStatus
wwpLeosSystemConfigMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1
wwpLeosSystemConfigAttr
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.1
wwpLeosSystemConfigDefaultGateway
OBJECT-TYPE
Default gateway IP address.
1.3.6.1.4.1.6141.2.60.12.1.1.1IpAddressread-writecurrent
wwpLeosSystemConfigBootCmdFile
OBJECT-TYPE
Name of the last command file successfully executed by the device.
1.3.6.1.4.1.6141.2.60.12.1.1.2FileNameread-writecurrent
wwpLeosSystemConfigBootCfgFile
OBJECT-TYPE
This object specifies the bootup configuration file for the system. Setting is object is similar to setting default load config file name. When the device reboots, it attempts to load the file specified by wwpLeosSystemConfigBootCfgFile.
1.3.6.1.4.1.6141.2.60.12.1.1.3FileNameread-writecurrent
wwpLeosSystemClockDateTime
OBJECT-TYPE
The current system date and time of box. There are no provisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device time is UTC, only first 7 bytes of DateAndTime data are returned, as per RFC1903.
1.3.6.1.4.1.6141.2.60.12.1.1.4DateAndTimeread-writecurrent
wwpLeosSystemConfigSavePermFile
OBJECT-TYPE
This object sets the save file name to the value of wwpLeosSystemConfigSavePermFile. Whenever wwpLeosSystemConfigControl is set to 'save' and wwpLeosSystemConfigSaveFile is not set, the device uses wwpLeosSystemConfigSavePermFile as the file name to store config.
1.3.6.1.4.1.6141.2.60.12.1.1.5FileNameread-writecurrent
wwpLeosSystemConfigLastFileNameReset
OBJECT-TYPE
Setting this object resets the name of the last configuration file that was successfully executed by the device.
1.3.6.1.4.1.6141.2.60.12.1.1.6TruthValueread-writecurrent
wwpLeosSystemServiceMode
OBJECT-TYPE
Setting this object changes the service mode of operation. It causes the device to reboot. If this object is set to 'none' the device rejects the request and returns an error. Applicable to 311v only.
1.3.6.1.4.1.6141.2.60.12.1.1.7INTEGER {none(0), mpls(1), pbt(2), aoam(3)}read-writecurrent
wwpLeosSystemConfigBackupGateway
OBJECT-TYPE
Backup gateway IP address.
1.3.6.1.4.1.6141.2.60.12.1.1.8IpAddressread-writecurrent
wwpLeosSystemConfigCustomerCfgFile
OBJECT-TYPE
This object sets the name of the default customer configuration file, which is the file that is copied to the default configuration file during a reset-to-customer-default operation. Setting this object to an empty string removes the file name from the system configuration.
1.3.6.1.4.1.6141.2.60.12.1.1.9FileNameread-writecurrent
wwpLeosSystemConfigDefaultGatewayTable
OBJECT-TYPE
The (conceptual) table listing the default gateways.
1.3.6.1.4.1.6141.2.60.12.1.1.10not-accessiblecurrent
wwpLeosSystemConfigDefaultGatewayEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1not-accessiblecurrent
wwpLeosSystemConfigDefaultGatewayIndex
OBJECT-TYPE
Unique identifier to the table.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1Integer32 (1..16)not-accessiblecurrent
wwpLeosSystemConfigDefaultGatewayInetAddrType
OBJECT-TYPE
The Inet address type of default gateway. Used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddress. When set to : Ipv4: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 Ipv6: wwpLeosSystemConfigDefaultGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2InetAddressTyperead-createcurrent
wwpLeosSystemConfigDefaultGatewayInetAddress
OBJECT-TYPE
Default gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be compliant with RFC 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigDefaultGateway is set to 0.0.0.0.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3InetAddressread-createcurrent
wwpLeosSystemConfigDefaultGatewayInterfaceName
OBJECT-TYPE
Interface Name of the gateway, local or remote.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4DisplayStringread-createcurrent
wwpLeosSystemConfigDefaultGatewayMetric
OBJECT-TYPE
Metric of the gateway.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5Integer32read-onlycurrent
wwpLeosSystemConfigDefaultGatewayStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.
1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6RowStatusread-createcurrent
wwpLeosSystemConfigBackupGatewayTable
OBJECT-TYPE
The (conceptual) table listing the default gateways
1.3.6.1.4.1.6141.2.60.12.1.1.11not-accessiblecurrent
wwpLeosSystemConfigBackupGatewayEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1not-accessiblecurrent
wwpLeosSystemConfigBackupGatewayIndex
OBJECT-TYPE
Unique identifier to the table.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1Integer32 (1..16)not-accessiblecurrent
wwpLeosSystemConfigBackupGatewayInetAddrType
OBJECT-TYPE
The Inet address type of backup gateway. Used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosSystemConfigBackupGatewayInetAddress should be compliant with InetAddressIPv6 from RFC 4001.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2InetAddressTyperead-createcurrent
wwpLeosSystemConfigBackupGatewayInetAddress
OBJECT-TYPE
Backup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosSystemConfigBackupGateway is set ot 0.0.0.0.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3InetAddressread-createcurrent
wwpLeosSystemConfigBackupGatewayInterfaceName
OBJECT-TYPE
Interface Name of the gateway, local or remote.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4DisplayStringread-createcurrent
wwpLeosSystemConfigBackupGatewayMetric
OBJECT-TYPE
Metric of the gateway.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5Integer32read-onlycurrent
wwpLeosSystemConfigBackupGatewayStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'.
1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6RowStatusread-createcurrent
wwpLeosSystemConfig
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.2
wwpLeosSystemConfigSaveFileName
OBJECT-TYPE
wwpLeosSystemConfigSaveFileName specifies the name of the config file to be used when wwpLeosSystemConfigControl has been set to 'save'. If this object is not set the device uses the file name specified by wwpLeosSystemConfigSavePermFile. If wwpLeosSystemConfigSavePermFile is also not set, the default configuration file name i.e startup-config is used to save the config. Once 'wwpLeosSystemConfigControl' has been successfully applied, a read on wwpLeosSystemConfigSaveFileName always returns an empty string else it shows what the user has configured.
1.3.6.1.4.1.6141.2.60.12.1.2.1FileNameread-writecurrent
wwpLeosSystemConfigControl
OBJECT-TYPE
Controls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. mfgDefaultCfg: Set system configuration to factory defaults. Note: This wipes out all the current configuration including password and VLAN information. If the system does not support any of these control configuration options, it returns an error while trying to set this object to the specific option. A read on this object returns none(0).
1.3.6.1.4.1.6141.2.60.12.1.2.2INTEGER {none(0), save(1), mfgDefaultCfg(2)}read-writecurrent
wwpLeosSystemConfigFilepath
OBJECT-TYPE
Returns the path for configuration related files.
1.3.6.1.4.1.6141.2.60.12.1.2.3FileNameread-onlycurrent
wwpLeosSystemConfigFileTable
OBJECT-TYPE
The (conceptual) table listing the configs
1.3.6.1.4.1.6141.2.60.12.1.2.4not-accessiblecurrent
wwpLeosSystemConfigFileEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemConfigFileTable.
1.3.6.1.4.1.6141.2.60.12.1.2.4.1not-accessiblecurrent
wwpLeosSystemConfigFileIndex
OBJECT-TYPE
Unique identifier to the table.
1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1Integer32 (1..65535)not-accessiblecurrent
wwpLeosSystemConfigFileName
OBJECT-TYPE
The name of the configuration file.
1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2FileNameread-onlycurrent
wwpLeosSystemConfigActivateFile
OBJECT-TYPE
Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' configuration. If the operation is successful, this object performs the CLI equivalent to these commands and returns the status. Setting this object to 'resetToCfg' kills the load module, reloads a new load module and applies the config file specified by wwpLeosSystemConfigFileName. Setting this object to 'none' does nothing.
1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3INTEGER {loadCfg(1), resetToCfg(2), none(3)}read-writecurrent
wwpLeosSystemTelnet
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.3
wwpLeosTelnetMaxBaseUserSessions
OBJECT-TYPE
The max number of limited user CLI sessions for the device. Includes both SSH and telnet sessions.
1.3.6.1.4.1.6141.2.60.12.1.3.1Integer32 (0..10)read-writecurrent
wwpLeosTelnetMaxSuperUserSessions
OBJECT-TYPE
The max number of super user CLI sessions for the device. Includes both SSH and telnet sessions.
1.3.6.1.4.1.6141.2.60.12.1.3.2Integer32 (0..10)read-writecurrent
wwpLeosTelnetMaxAdminUserSessions
OBJECT-TYPE
The max number of admin users CLI sessions for the device. Includes both SSH and telnet sessions.
1.3.6.1.4.1.6141.2.60.12.1.3.3Integer32 (0..10)read-writecurrent
wwpLeosSystemCpuLoadQuery
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.7
wwpLeosSystemCpuLoad1Min
OBJECT-TYPE
The OID to display CPU load in last 1 minute. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.1Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad10Min
OBJECT-TYPE
The OID to display CPU load in last 10 minutes. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.2Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad15Min
OBJECT-TYPE
The OID to display CPU load in last 15 minutes. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.3Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad5Min
OBJECT-TYPE
The OID to display CPU load in last 5 minutes. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.4Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad1MinMinimum
OBJECT-TYPE
The minimum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.5Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad1MinMaximum
OBJECT-TYPE
The maximum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.6Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad1MinState
OBJECT-TYPE
The 1 minute CPU load average state.
1.3.6.1.4.1.6141.2.60.12.1.7.7INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemCpuLoad15MinMinimum
OBJECT-TYPE
The minimum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.8Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad15MinMaximum
OBJECT-TYPE
The maximum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.9Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad15MinState
OBJECT-TYPE
The 15 minute CPU load average state.
1.3.6.1.4.1.6141.2.60.12.1.7.10INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemCpuLoad5MinMinimum
OBJECT-TYPE
The minimum 5 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.11Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad5MinMaximum
OBJECT-TYPE
The maximum 5 minute CPU load average. This value is an integer representation of the CPU load (load average * 100).
1.3.6.1.4.1.6141.2.60.12.1.7.12Integer32 (1..65535)read-onlycurrent
wwpLeosSystemCpuLoad5MinState
OBJECT-TYPE
The 5 minute CPU load average state.
1.3.6.1.4.1.6141.2.60.12.1.7.13INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemConfigNotif
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.8
wwpLeosSystemConfigNotifTable
OBJECT-TYPE
The (conceptual) table listing the configuration file line numbers. This table is only used when sending wwpLeosImproperCmdInConfigFile notification. No Get, GetNext or Set is allowed in this table.
1.3.6.1.4.1.6141.2.60.12.1.8.1not-accessiblecurrent
wwpLeosSystemConfigNotifEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemConfigNotifTable. No Get, GetNext or Set is allowed in this table.
1.3.6.1.4.1.6141.2.60.12.1.8.1.1not-accessiblecurrent
wwpLeosSystemConfigErrLineNum
OBJECT-TYPE
The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number that failed when the configuration was applied. No Get, GetNext or Set is allowed in this table.
1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1Integer32 (0..64)read-onlycurrent
wwpLeosSystemConfigErrStr
OBJECT-TYPE
The OID is wwpLeosSystemConfigErrStr trap to identify the line that failed when the configuration was applied. No Get, GetNext or Set is allowed on this table.
1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2DisplayStringread-onlycurrent
wwpLeosSystemConfigErrLinesTotal
OBJECT-TYPE
The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers that failed when the configuration was applied. No Get, GetNext or Set is allowed in this table.
1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3Integer32 (0..64)read-onlycurrent
wwpLeosSystemMemoryUsageQuery
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.9
wwpLeosSystemMemoryUsageTable
OBJECT-TYPE
Table of Memory Usage for various Memory Pools.
1.3.6.1.4.1.6141.2.60.12.1.9.1not-accessiblecurrent
wwpLeosSystemMemoryUsageEntry
OBJECT-TYPE
An entry for each Memory Pool.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1not-accessiblecurrent
wwpLeosSystemMemoryUsagePoolIndex
OBJECT-TYPE
The Memory Pool type.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1INTEGER {ose-pool-1(1), global-heap(2), malloc-heap(3)}not-accessiblecurrent
wwpLeosSystemMemoryUsageMemoryTotal
OBJECT-TYPE
Total size of the Memory Pool in bytes.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2Unsigned32read-onlycurrent
wwpLeosSystemMemoryUsageMemoryLWM
OBJECT-TYPE
Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3Unsigned32read-onlycurrent
wwpLeosSystemMemoryUsageMemoryFree
OBJECT-TYPE
Amount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4Unsigned32read-onlycurrent
wwpLeosSystemMemoryUsageStatus
OBJECT-TYPE
Denotes if the free memory amount is normal or below limit.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5INTEGER {normal(1), lowMemory(2), notSupported(3)}read-onlycurrent
wwpLeosSystemMemoryUsageMemoryUsed
OBJECT-TYPE
Amount of used memory in the Memory Pool in bytes.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6Unsigned32read-onlycurrent
wwpLeosSystemMemoryUsageMemoryAvailable
OBJECT-TYPE
Amount of available memory in the Memory Pool in bytes.
1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7Unsigned32read-onlycurrent
wwpLeosSystemXFtp
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.10
wwpLeosSystemXFtpMode
OBJECT-TYPE
Select between modes of file transfer. The default mode is tftp.
1.3.6.1.4.1.6141.2.60.12.1.10.1INTEGER {tftp(1), ftp(2), sftp(3)}read-writecurrent
wwpLeosSystemXFtpServer
OBJECT-TYPE
IP address or the host name of default server.
1.3.6.1.4.1.6141.2.60.12.1.10.2DisplayStringread-writecurrent
wwpLeosSystemXFtpUserName
OBJECT-TYPE
Name used to login with.
1.3.6.1.4.1.6141.2.60.12.1.10.3DisplayString (SIZE(0..32))read-writecurrent
wwpLeosSystemXFtpPasswd
OBJECT-TYPE
Password used to login with.
1.3.6.1.4.1.6141.2.60.12.1.10.4DisplayString (SIZE(0..128))read-writecurrent
wwpLeosSystemXFtpNumOfRetries
OBJECT-TYPE
Number of times to retry a file transfer request if it fails.
1.3.6.1.4.1.6141.2.60.12.1.10.5Integer32 (1..10)read-writecurrent
wwpLeosSystemXFtpRetryInterval
OBJECT-TYPE
Length of time in seconds to wait before retrying a file transfer if it fails.
1.3.6.1.4.1.6141.2.60.12.1.10.6Integer32 (1..300)read-writecurrent
wwpLeosSystemXFtpConnectionTimeout
OBJECT-TYPE
Length of time in seconds to wait before connection times out.
1.3.6.1.4.1.6141.2.60.12.1.10.7Integer32 (1..100)read-writecurrent
wwpLeosSystemXFtpTFtpServerTable
OBJECT-TYPE
The (conceptual) table listing the default TFTP server
1.3.6.1.4.1.6141.2.60.12.1.10.8not-accessiblecurrent
wwpLeosSystemXFtpTFtpServerEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable.
1.3.6.1.4.1.6141.2.60.12.1.10.8.1not-accessiblecurrent
wwpLeosSystemXFtpTFtpServerIndex
OBJECT-TYPE
Unique identifier to the table.
1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1Integer32 (1)not-accessiblecurrent
wwpLeosSystemXFtpTFtpServerHostName
OBJECT-TYPE
Host name or IP address of the default TFTP server.
1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2DisplayStringread-createcurrent
wwpLeosSystemXFtpTFtpServerRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.
1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6RowStatusread-createcurrent
wwpLeosSystemXFtpFtpServerTable
OBJECT-TYPE
The (conceptual) table listing the default FTP server.
1.3.6.1.4.1.6141.2.60.12.1.10.9not-accessiblecurrent
wwpLeosSystemXFtpFtpServerEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1not-accessiblecurrent
wwpLeosSystemXFtpFtpServerIndex
OBJECT-TYPE
Unique identifier to the table.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1Integer32 (1)not-accessiblecurrent
wwpLeosSystemXFtpFtpServerHostName
OBJECT-TYPE
Host name or IP address of the default FTP server.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2DisplayStringread-createcurrent
wwpLeosSystemXFtpFtpServerUserName
OBJECT-TYPE
User name / login ID to be used with the default FTP server.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3DisplayStringread-createcurrent
wwpLeosSystemXFtpFtpServerPassword
OBJECT-TYPE
Password to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4DisplayStringread-createcurrent
wwpLeosSystemXFtpFtpServerSecret
OBJECT-TYPE
Password secret to be used with the default FTP server. Either the password or the secret may be set, but not both.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5OCTET STRING (SIZE(0..259))read-createcurrent
wwpLeosSystemXFtpFtpServerRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.
1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6RowStatusread-createcurrent
wwpLeosSystemXFtpSFtpServerTable
OBJECT-TYPE
The (conceptual) table listing the default SFTP server
1.3.6.1.4.1.6141.2.60.12.1.10.10not-accessiblecurrent
wwpLeosSystemXFtpSFtpServerEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1not-accessiblecurrent
wwpLeosSystemXFtpSFtpServerIndex
OBJECT-TYPE
Unique identifier to the table.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1Integer32 (1)not-accessiblecurrent
wwpLeosSystemXFtpSFtpServerHostName
OBJECT-TYPE
Host name or IP address of the default SFTP server.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2DisplayStringread-createcurrent
wwpLeosSystemXFtpSFtpServerUserName
OBJECT-TYPE
User name / login ID to be used with the default SFTP server.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3DisplayStringread-createcurrent
wwpLeosSystemXFtpSFtpServerPassword
OBJECT-TYPE
Password to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4DisplayStringread-createcurrent
wwpLeosSystemXFtpSFtpServerSecret
OBJECT-TYPE
Password secret to be used with the default SFTP server. Either the password or the secret may be set, but not both.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5OCTET STRING (SIZE(0..259))read-createcurrent
wwpLeosSystemXFtpSFtpServerRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete an entry, set this object to 'destroy'. At the current time, there is only one, static row in this table, with index 1.
1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6RowStatusread-createcurrent
wwpLeosSystemXFtpSecret
OBJECT-TYPE
Sets the pre-encypted secret. This global secret will be automatically applied to either the ftp or sftp table, depending on the value of the wwpLeosSystemXFtpMode object.
1.3.6.1.4.1.6141.2.60.12.1.10.11OCTET STRING (SIZE(0..259))read-writecurrent
wwpLeosSystemXFtpSftp
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.10.12
wwpLeosSystemXFtpSftpClient
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.10.12.1
wwpLeosSystemXftpSftpClientAlgorithm
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1
wwpLeosSystemXftpSftpClientKexAlgorithmTable
OBJECT-TYPE
The (conceptual) table listing the SFTP Client's SSH key-exchange (KEX) algorithms.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1not-accessiblecurrent
wwpLeosSystemXftpSftpClientKexAlgorithmEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXftpSftpClientKexAlgorithmTable.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1not-accessiblecurrent
wwpLeosSystemXftpSftpClientKexAlgorithmIndex
OBJECT-TYPE
An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientKexAlgorithmName.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.1Unsigned32not-accessiblecurrent
wwpLeosSystemXftpSftpClientKexAlgorithmName
OBJECT-TYPE
Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the key exchange algorithm with SSH servers.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.2DisplayStringread-onlycurrent
wwpLeosSystemXftpSftpClientKexAlgorithmAdminState
OBJECT-TYPE
The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the key exchange algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmOperState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.3INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosSystemXftpSftpClientKexAlgorithmOperState
OBJECT-TYPE
The operational state of the algorithm, indicating whether the specified algorithm will be included in the key exchange algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientKexAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.4INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosSystemXftpSftpClientKexAlgorithmPriority
OBJECT-TYPE
The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the key exchange algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.1.1.5Unsigned32 (1..3)read-writecurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable
OBJECT-TYPE
The (conceptual) table listing the SFTP client's SSH server host key algorithms.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2not-accessiblecurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmTable.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1not-accessiblecurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmIndex
OBJECT-TYPE
An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.1Unsigned32not-accessiblecurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmName
OBJECT-TYPE
Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the server host key algorithm with SSH servers.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.2DisplayStringread-onlycurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState
OBJECT-TYPE
The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the server host key algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.3INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmOperState
OBJECT-TYPE
The operational state of the algorithm, indicating whether the specified algorithm will be included in the server host key algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.4INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosSystemXftpSftpClientServerHostKeyAlgorithmPriority
OBJECT-TYPE
The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the server host key algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of an algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.2.1.5Unsigned32 (1..6)read-writecurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable
OBJECT-TYPE
The (conceptual) table listing the SFTP client's SSH encryption algorithms.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3not-accessiblecurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXftpSftpClientEncryptionAlgorithmTable.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1not-accessiblecurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmIndex
OBJECT-TYPE
An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.1Unsigned32not-accessiblecurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmName
OBJECT-TYPE
Name of the algorithm as used by the SFTP client SSH protocol when negotiating the encryption algorithm with SSH servers.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.2DisplayStringread-onlycurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState
OBJECT-TYPE
The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the encryption algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.3INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmOperState
OBJECT-TYPE
The operational state of the algorithm, indicating whether the specified algorithm will be included in the encryption algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientEncryptionAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.4INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosSystemXftpSftpClientEncryptionAlgorithmPriority
OBJECT-TYPE
The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the encryption algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.3.1.5Unsigned32 (1..12)read-writecurrent
wwpLeosSystemXftpSftpClientMacAlgorithmTable
OBJECT-TYPE
The (conceptual) table listing the SFTP client's SSH message authentication code (MAC) algorithms.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4not-accessiblecurrent
wwpLeosSystemXftpSftpClientMacAlgorithmEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXftpSftpClientMacAlgorithmTable.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1not-accessiblecurrent
wwpLeosSystemXftpSftpClientMacAlgorithmIndex
OBJECT-TYPE
An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientMacAlgorithmName.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.1Unsigned32not-accessiblecurrent
wwpLeosSystemXftpSftpClientMacAlgorithmName
OBJECT-TYPE
Name of the algorithm as used by the SFTP client's SSH protocol when negotiating the message authentication code algorithm with SSH servers.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.2DisplayStringread-onlycurrent
wwpLeosSystemXftpSftpClientMacAlgorithmAdminState
OBJECT-TYPE
The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the message authentication code algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmOperState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.3INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosSystemXftpSftpClientMacAlgorithmOperState
OBJECT-TYPE
The operational state of the algorithm, indicating whether the specified algorithm will be included in the message authentication code algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientMacAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.4INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosSystemXftpSftpClientMacAlgorithmPriority
OBJECT-TYPE
The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the message authentication code algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order or priority, as part of the algorithm negotiation process. When the priority of an algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.4.1.5Unsigned32 (1..6)read-writecurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmTable
OBJECT-TYPE
The (conceptual) table listing the SFTP client's SSH compression algorithms. NOTE: At this time the system xftp feature only supports 'none' compression algorithm. This table is provided for completeness since the compression algorithm is one of the algorithms negotiated during SSH connections.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5not-accessiblecurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosSystemXftpSftpClientCompressionAlgorithmTable.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1not-accessiblecurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmIndex
OBJECT-TYPE
An arbitrary index into the table identifying a unique algorithm as identified by the value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.1Unsigned32not-accessiblecurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmName
OBJECT-TYPE
Name of the algorithm as used by the SFTP client SSH protocol when negotiating the compression algorithm with SSH servers.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.2DisplayStringread-onlycurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState
OBJECT-TYPE
The administrative state of the algorithm, indicating whether the administrative settings are set to allow the inclusion of the specified algorithm in the compression algorithm negotiation process. Such inclusion or exclusion of the algorithm is indicated by the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.3INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmOperState
OBJECT-TYPE
The operational state of the algorithm, indicating whether the specified algorithm will be included in the compression algorithm negotiation process. The operational state is determined based on the corresponding value of wwpLeosSystemXftpSftpClientCompressionAlgorithmAdminState as well as other system attributes which may limit the allowable algorithms that may be used.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.4INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosSystemXftpSftpClientCompressionAlgorithmPriority
OBJECT-TYPE
The priority, or importance, of the specified algorithm amongst the other algorithms in this table. Value 1 is highest priority. During the compression algorithm negotiation, the SFTP client's SSH protocol will consider all operationally enabled algorithms in order of priority, as part of the algorithm negotiation process. When the priority of one algorithm is set to a new value, it will necessarily cause the priority of other algorithms to adjust in order to make room for the new set priority of the algorithm.
1.3.6.1.4.1.6141.2.60.12.1.10.12.1.1.5.1.5Unsigned32 (1)read-writecurrent
wwpLeosSystemCpuUtilization
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.11
wwpLeosSystemCpuUtilizationLast5Seconds
OBJECT-TYPE
Average 5 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.1Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast5SecondsMinimum
OBJECT-TYPE
Minimum 5 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.2Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast5SecondsMaximum
OBJECT-TYPE
The maximum 5 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.3Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast5SecondsState
OBJECT-TYPE
The 5 second CPU usage state.
1.3.6.1.4.1.6141.2.60.12.1.11.4INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemCpuUtilizationLast10Seconds
OBJECT-TYPE
The 10 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.5Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast10SecondsMinimum
OBJECT-TYPE
Minimum 10 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.6Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast10SecondsMaximum
OBJECT-TYPE
Maximum 10 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.7Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast10SecondsState
OBJECT-TYPE
The 10 second CPU usage state.
1.3.6.1.4.1.6141.2.60.12.1.11.8INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemCpuUtilizationLast60Seconds
OBJECT-TYPE
The 60 second CPU usage state.
1.3.6.1.4.1.6141.2.60.12.1.11.9Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast60SecondsMinimum
OBJECT-TYPE
Minimum 60 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.10Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast60SecondsMaximum
OBJECT-TYPE
Maximum 60 second CPU usage measurement.
1.3.6.1.4.1.6141.2.60.12.1.11.11Integer32 (1..100)read-onlycurrent
wwpLeosSystemCpuUtilizationLast60SecondsState
OBJECT-TYPE
The 60 second CPU state.
1.3.6.1.4.1.6141.2.60.12.1.11.12INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemFileSystemUtilization
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.12
wwpLeosSystemFileSystemUtilizationTmpfsCurrent
OBJECT-TYPE
Current percentage usage of the /tmp/ directory in the filesystem.
1.3.6.1.4.1.6141.2.60.12.1.12.1Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationTmpfsMinimum
OBJECT-TYPE
Minimum percentage usage of the /tmp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.2Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationTmpfsMaximum
OBJECT-TYPE
Maximum percentage usage of the /tmp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.3Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationTmpfsState
OBJECT-TYPE
Current state of the /tmp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.4INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemFileSystemUtilizationSysfsCurrent
OBJECT-TYPE
Current percentage usage of the /mnt/sysfs/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.5Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationSysfsMinimum
OBJECT-TYPE
Minimum percentage usage of the /mnt/sysfs/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.6Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationSysfsMaximum
OBJECT-TYPE
Maximum percentage usage of the /mnt/sysfs/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.7Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationSysfsState
OBJECT-TYPE
Current state of the /mnt/sysfs/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.8INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemFileSystemUtilizationXftpCurrent
OBJECT-TYPE
Current percentage usage of the /mnt/xftp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.9Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationXftpMinimum
OBJECT-TYPE
Minimum percentage usage of the /mnt/xftp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.10Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationXftpMaximum
OBJECT-TYPE
Maximum percentage usage of the /mnt/xftp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.11Integer32 (1..100)read-onlycurrent
wwpLeosSystemFileSystemUtilizationXftpState
OBJECT-TYPE
Current state of the /mnt/xftp/ directory in the file system.
1.3.6.1.4.1.6141.2.60.12.1.12.12INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemMemoryUtilization
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.13
wwpLeosSystemMemoryUtilizationUsedMemoryCurrent
OBJECT-TYPE
Current number of used memory in bytes.
1.3.6.1.4.1.6141.2.60.12.1.13.1Gauge32read-onlycurrent
wwpLeosSystemMemoryUtilizationUsedMemoryMinimum
OBJECT-TYPE
Minimum number of used memory in bytes.
1.3.6.1.4.1.6141.2.60.12.1.13.2Gauge32read-onlycurrent
wwpLeosSystemMemoryUtilizationUsedMemoryMaximum
OBJECT-TYPE
Maximum number of used memory in bytes.
1.3.6.1.4.1.6141.2.60.12.1.13.3Gauge32read-onlycurrent
wwpLeosSystemMemoryUtilizationAvailableMemoryCurrent
OBJECT-TYPE
Current number of available memory in bytes.
1.3.6.1.4.1.6141.2.60.12.1.13.4Gauge32read-onlycurrent
wwpLeosSystemMemoryUtilizationAvailableMemoryMinimum
OBJECT-TYPE
Minimum number of available memory in bytes.
1.3.6.1.4.1.6141.2.60.12.1.13.5Gauge32read-onlycurrent
wwpLeosSystemMemoryUtilizationAvailableMemoryMaximum
OBJECT-TYPE
Maximum number of available memory in bytes.
1.3.6.1.4.1.6141.2.60.12.1.13.6Gauge32read-onlycurrent
wwpLeosSystemMemoryUtilizationAvailableMemoryState
OBJECT-TYPE
Current state of the available memory.
1.3.6.1.4.1.6141.2.60.12.1.13.7INTEGER {normal(1), warning(2), degraded(3), faulted(4)}read-onlycurrent
wwpLeosSystemGuardian
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.14
wwpLeosSystemGuardianAdminEnable
OBJECT-TYPE
Sets the admin state for the system guardian. A reboot is required for changes to take effect
1.3.6.1.4.1.6141.2.60.12.1.14.1INTEGER {enable(1), disable(2)}read-writecurrent
wwpLeosSystemGuardianOperEnable
OBJECT-TYPE
Displays the current guardian operational state.
1.3.6.1.4.1.6141.2.60.12.1.14.2INTEGER {enable(1), disable(2), suspended(3)}read-onlycurrent
wwpLeosSystemGuardianLimitNumReboots
OBJECT-TYPE
Limits the number of consecutive guardian reboots to 3 if set to on.
1.3.6.1.4.1.6141.2.60.12.1.14.3INTEGER {on(1), off(2)}read-writecurrent
wwpLeosSystemGuardianConsecutiveReboots
OBJECT-TYPE
The current number of consecutive guardian reboots.
1.3.6.1.4.1.6141.2.60.12.1.14.4Integer32 (1..65535)read-onlycurrent
wwpLeosSystemGuardianTotalReboots
OBJECT-TYPE
The total number of guardian reboots.
1.3.6.1.4.1.6141.2.60.12.1.14.5Integer32 (1..65535)read-onlycurrent
wwpLeosSystemServers
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.15
wwpLeosSystemSftpServerAdminState
OBJECT-TYPE
Sets the administrative state for the SFTP server.
1.3.6.1.4.1.6141.2.60.12.1.15.1SystemServerAdminStateread-writecurrent
wwpLeosSystemFtpServerAdminState
OBJECT-TYPE
Sets the administrative state for the FTP server.
1.3.6.1.4.1.6141.2.60.12.1.15.2SystemServerAdminStateread-writecurrent
wwpLeosSystemTftpServerAdminState
OBJECT-TYPE
Sets the administrative state for the TFTP server.
1.3.6.1.4.1.6141.2.60.12.1.15.3SystemServerAdminStateread-writecurrent
wwpLeosSystemScpServerAdminState
OBJECT-TYPE
Sets the administrative state for the SCP server.
1.3.6.1.4.1.6141.2.60.12.1.15.4SystemServerAdminStateread-writecurrent
wwpLeosSystemClients
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.1.16
wwpLeosSystemFtpClientAdminState
OBJECT-TYPE
Sets the administrative state for the FTP client.
1.3.6.1.4.1.6141.2.60.12.1.16.2SystemClientAdminStateread-writecurrent
wwpLeosSystemTftpClientAdminState
OBJECT-TYPE
Sets the administrative state for the TFTP client.
1.3.6.1.4.1.6141.2.60.12.1.16.3SystemClientAdminStateread-writecurrent
wwpLeosSystemConfigMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.2
wwpLeosSystemConfigMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.2.0
wwpLeosSystemConfigMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.3
wwpLeosSystemConfigCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.3.1
wwpLeosSystemConfigMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.12.3.2

Notifications

NameOIDStatus
wwpLeosImproperCmdInConfigFile
NOTIFICATION-TYPE
A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in an agent role, has counted the number of improper commands that were found in the configuration file while processing the wwpLeosSystemConfigFileName
1.3.6.1.4.1.6141.2.60.12.2.0.1current
wwpLeosSystemServiceModeChange
NOTIFICATION-TYPE
A wwpLeosSystemServiceModeChange notification is sent whenever someone changes the system service mode between mpls and pbt.
1.3.6.1.4.1.6141.2.60.12.2.0.2current
wwpLeosSystemMemoryStatusNotification
NOTIFICATION-TYPE
A wwpLeosSystemMemoryStatusNotification notification is sent whenever the system memory is below threshold limit.
1.3.6.1.4.1.6141.2.60.12.2.0.3current
wwpLeosImproperCmdInConfigLineString
NOTIFICATION-TYPE
A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in an agent role, has detected that improper commands were found in the configuration file while processing the wwpLeosSystemConfigFileName. wwpLeosSystemConfigErrStr will specify the commands which failed with the line number.
1.3.6.1.4.1.6141.2.60.12.2.0.4current
wwpLeosSystemCpuUtilization5SecondStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 5 second CPU utilization changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.5current
wwpLeosSystemCpuUtilization10SecondStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent when the 10 second CPU utilization changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.6current
wwpLeosSystemCpuUtilization60SecondStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemCpuUtilizationStatusTrap is sent when the 60 second CPU utilization changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.7current
wwpLeosSystemCpu1MinLoadStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over one minute changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.8current
wwpLeosSystemCpu5MinLoadStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over five minutes changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.9current
wwpLeosSystemCpu15MinLoadStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemCpuLoadStatusTrap is sent when the CPU load over fifteen minutes changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.10current
wwpLeosSystemMemoryUtilizationStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemMemoryUtilizationStatusTrap is sent when the memory utilization changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.11current
wwpLeosSystemFileSystemUtilizationTmpStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent when the usage of '/tmp/' changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.12current
wwpLeosSystemFileSystemUtilizationSysfsStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent when the usage of '/mnt/sysfs/' changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.13current
wwpLeosSystemFileSystemUtilizationXftpStatusTrap
NOTIFICATION-TYPE
The wwpLeosSystemFileSystemUtilizationXftpStatusTrap is sent when the usage of '/mnt/xftp/' changes states.
1.3.6.1.4.1.6141.2.60.12.2.0.14current

Conformance

NameOIDStatus
wwpLeosDefaultGatewayCompliance
MODULE-COMPLIANCE
The compliance statement of wwpLeosSystemConfigAttr.
1.3.6.1.4.1.6141.2.60.12.3.1.1current
wwpLeosBackupGatewayCompliance
MODULE-COMPLIANCE
The compliance statement of wwpLeosSystemConfigAttr.
1.3.6.1.4.1.6141.2.60.12.3.1.2current
wwpLeosDefaultGatewayIPv6Group
OBJECT-GROUP
System config default gateway objects for supporting IPv6.
1.3.6.1.4.1.6141.2.60.12.3.2.1current
wwpLeosBackupGatewayIPv6Group
OBJECT-GROUP
System config backup gateway objects for supporting IPv6.
1.3.6.1.4.1.6141.2.60.12.3.2.2current