WWP-LEOS-SYSLOG-COLLECTOR-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.21
- Last updated
- 2012-04-05 00:00
- Organization
- Ciena Inc
- Revisions
- 2012-04-05 00:00, 2006-04-18 10:12, 2003-01-21 10:12
- Namespace
- ciena
- Source file
WWP-LEOS-SYSLOG-COLLECTOR-MIB- Digest
sha256:a31cea46bf57baad4e8840715396936c132691f9899b69b6a1f15f3692b867c9
Description
A MIB module to manage syslog collectors on the LEOS based WWP products.
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-SYSLOG-COLLECTOR-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| SyslogFacility TEXTUAL-CONVENTION This textual convention enumerates the facilities that originate syslog messages. The value noMap(24) indicates that the appropriate facility will be provided by the individual applications on the managed entity. If this option is not available on a particular entity attempt set the facillity to this value will fail with an error-status of wrongValue. | current | |||
| SyslogSeverity TEXTUAL-CONVENTION This textual convention enumerates the severity levels of syslog messages. The syslog protocol uses the values 0 (emergency), to 7 (debug). | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosSyslogCollMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.1 | |||
| wwpLeosSyslogSystem OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.1.1 | |||
| wwpLeosSyslogEnable OBJECT-TYPE Specifies whether or not the syslog client is enabled. This is the system wide parameter and will overwrite any collector specific managed object to enable or disable the syslog client. | 1.3.6.1.4.1.6141.2.60.21.1.1.1 | TruthValue | read-write | current |
| wwpLeosSyslogColl OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.1.2 | |||
| wwpLeosSyslogCollectorTable OBJECT-TYPE A table containing Syslog collector information. To create entries in this table use SNMP multiple set operation. wwpLeosSyslogCollectorAddr, wwpLeosSyslogIndex and wwpLeosSyslogCollectorStatus are required fields that needs to be set to create entry. To delete entry set wwpLeosSyslogCollectorStatus to destroy. | 1.3.6.1.4.1.6141.2.60.21.1.2.1 | not-accessible | current | |
| wwpLeosSyslogCollectorEntry OBJECT-TYPE Defines the information pertaining to a syslog collector to which a syslog messages will be relayed. Entries within this table with an access level of read- create MUST be considered non-volatile and MUST be maintained across entity resets. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1 | not-accessible | current | |
| wwpLeosSyslogIndex OBJECT-TYPE Specifies the unique index used to represent each row in the table. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.1 | Integer32 (1..10) | not-accessible | current |
| wwpLeosSyslogCollectorAddr OBJECT-TYPE The address for the Syslog message collector. It can be Host Name or IP Address. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.2 | DisplayString | read-create | current |
| wwpLeosSyslogCollectorResolvedAddr OBJECT-TYPE When wwpLeosSyslogCollectorAddr represents: Host name : The resolved address will either be Ipv4 address or Ipv6 address. Ipv4 address : The resolved address will be the same Ipv4 address. Ipv6 address : The resolved address will be the same Ipv6 address. When the resolved address represents: Ipv4 address : wwpLeosSyslogCollectorResolvedAddr will represent the resolved Ipv4 address. wwpLeosSyslogCollectorResolvedInetAddr used in conjunction with wwpLeosSyslogCollectorResolvedInetAddrType will represent the same Ipv4 address. Ipv6 address : wwpLeosSyslogCollectorResolvedAddr will represent 0.0.0.0. wwpLeosSyslogCollectorResolvedInetAddr used in conjunction with wwpLeosSyslogCollectorResolvedInetAddrType will represent the Ipv6 address. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.3 | IpAddress | read-only | current |
| wwpLeosSyslogCollectorUDPPort OBJECT-TYPE The port number on the destination to which the syslog message will be forwarded over the udp transport. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.4 | Integer32 (1..65535) | read-create | current |
| wwpLeosSyslogCollectorFacility OBJECT-TYPE The syslog facility code that will be added to the messages forwarded to this collector. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.5 | SyslogFacility | read-create | current |
| wwpLeosSyslogCollectorMinSeverity OBJECT-TYPE Any syslog message with a severity less than the severity specified by this object will be ignored by the collector. note: severity level numeric values increase as their severity decreases, e.g. error(3) is more severe than debug(7). | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.6 | SyslogSeverity | read-create | deprecated |
| wwpLeosSyslogCollectorMaxSeverity OBJECT-TYPE Any syslog message with a severity greater than the severity specified by this object will be ignored by the collector. note: severity level numeric values increase as their severity decreases, e.g. error(3) is more severe than debug(7). | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.7 | SyslogSeverity | read-create | deprecated |
| wwpLeosSyslogCollectorUserAdminState OBJECT-TYPE Specifies the admin state of the wwpLeosSyslogCollectorAddr configured by user. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.8 | INTEGER {disabled(1), enabled(2)} | read-create | current |
| wwpLeosSyslogCollectorDhcpAdminState OBJECT-TYPE Specifies the admin state of the wwpLeosSyslogCollectorAddr configured by DHCP. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.9 | INTEGER {disabled(1), enabled(2)} | read-only | current |
| wwpLeosSyslogCollectorOperState OBJECT-TYPE Specifies the operational state of the wwpLeosSyslogCollectorAddr. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.10 | INTEGER {disabled(1), enabled(2)} | read-only | current |
| wwpLeosSyslogCollectorStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo' and specify at least wwpLeosSyslogIndex and wwpLeosSyslogCollectorAddr. To delete the entry set this object to 'destroy'. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.11 | RowStatus | read-create | current |
| wwpLeosSyslogCollectorCustomPrefix OBJECT-TYPE Specifies the syslog custom prefix that will be prepended to all syslog log messages before device sends syslog messages to syslog collectors. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.12 | DisplayString (SIZE(0..15)) | read-create | current |
| wwpLeosSyslogCollectorResolvedInetAddrType OBJECT-TYPE Specifies the resolved IP address type . Used in conjunction with wwpLeosSyslogCollectorResolvedInetAddress. When set to : ipv4 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with InetAddressIPv4 ipv6 : wwpLeosSyslogCollectorResolvedInetAddress should be compliant with InetAddressIPv6 | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.13 | InetAddressType | read-only | current |
| wwpLeosSyslogCollectorResolvedInetAddress OBJECT-TYPE Specifies the resolved ip address for given wwpLeosSyslogCollectorAddr. If wwpLeosSyslogCollectorAddr is set to host name then wwpLeosSyslogCollectorResolvedInetAddr will display the resolved IP address. If wwpLeosSyslogCollectorAddr is set to IP address then wwpLeosSyslogCollectorResolvedInetAddr will display same value as wwpLeosSyslogCollectorAddr. This OID should be used in conjuction with wwpLeosSyslogCollectorResolvedInetAddrType. | 1.3.6.1.4.1.6141.2.60.21.1.2.1.1.14 | InetAddress | read-only | current |
| wwpLeosSyslogCollectorSeverityTable OBJECT-TYPE A table containing Syslog collector severity information. To create entries in this table following objects must be specified. - Indexes must be specified - To delete entry set wwpLeosSyslogCollectorStatus to destroy. | 1.3.6.1.4.1.6141.2.60.21.1.2.2 | not-accessible | current | |
| wwpLeosSyslogCollectorSeverityEntry OBJECT-TYPE Defines the information pertaining to a syslog collector severity to which a syslog messages will be relayed. Syslog Collector will only receive messages of severity that exist in this table. | 1.3.6.1.4.1.6141.2.60.21.1.2.2.1 | not-accessible | current | |
| wwpLeosSyslogCollectorSeverity OBJECT-TYPE This mib object specifies the severity of the syslog message that this collector should receive. | 1.3.6.1.4.1.6141.2.60.21.1.2.2.1.1 | SyslogSeverity | not-accessible | current |
| wwpLeosSyslogCollectorSeverityRowStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to 'destroy'. | 1.3.6.1.4.1.6141.2.60.21.1.2.2.1.2 | RowStatus | read-create | current |
| wwpLeosSyslogCollMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.2 | |||
| wwpLeosSyslogCollMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.2.0 | |||
| wwpLeosSyslogCollMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.3 | |||
| wwpLeosSyslogCollMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.3.1 | |||
| wwpLeosSyslogCollMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.21.3.2 |