WWP-LEOS-RSVPTE-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.30
- Last updated
- 2011-07-06 00:00
- Organization
- Ciena, Inc
- Revisions
- 2011-07-06 00:00, 2005-08-08 17:00
- Namespace
- ciena
- Source file
WWP-LEOS-RSVPTE-MIB- Digest
sha256:dd99e5670c17878fb0cba44980f43c2abb6e8d3af8db44a2166a7aa1b52a9c0b
Description
Added new objects wwpLeosRsvpteIfHelloInterval,wwpLeosRsvpteIfHelloTolerance, wwpLeosRsvpteIfAdvertisedLabel.
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-RSVPTE-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| AdvertisedLabel TEXTUAL-CONVENTION Advertised Label | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosRsvpteMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.30.1 | |||
| wwpLeosRsvpteObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.30.1.1 | |||
| wwpLeosRsvpteAdminStatus OBJECT-TYPE The desired administrative state of RSVP-TE. | 1.3.6.1.4.1.6141.2.60.30.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| wwpLeosRsvpteOperStatus OBJECT-TYPE The current operational state of RSVP-TE. | 1.3.6.1.4.1.6141.2.60.30.1.1.2 | INTEGER {up(1), down(2), goingUp(3), goingDown(4), actFailed(5)} | read-only | current |
| wwpLeosRsvpteRetryInterval OBJECT-TYPE The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. This cannot be changed while admin status is enable or oper status is up | 1.3.6.1.4.1.6141.2.60.30.1.1.3 | Unsigned32 (3..65) | read-write | current |
| wwpLeosRsvpteRetryInfiniteState OBJECT-TYPE The persistent tunnel retry infinity. This is the State which when on will trigger RSVP-TE to try to restore the tunnels infinite times. This object can only be set if RSVP-TE is globally disabled. | 1.3.6.1.4.1.6141.2.60.30.1.1.4 | INTEGER {on(1), off(2)} | read-write | current |
| wwpLeosRsvpteRetryMax OBJECT-TYPE The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to reestablish the tunnel. This field is not used when wwpLeosRsvpteRetryInfiniteState is on | 1.3.6.1.4.1.6141.2.60.30.1.1.5 | INTEGER (1..255) | read-only | current |
| wwpLeosRsvpteRefreshInterval OBJECT-TYPE This RSVP-TE value, R, which is used to set the average interval between refresh path and resv messages. | 1.3.6.1.4.1.6141.2.60.30.1.1.6 | Integer32 | read-only | current |
| wwpLeosRsvpteRefreshMultiple OBJECT-TYPE The RSVP-TE value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have timed out. | 1.3.6.1.4.1.6141.2.60.30.1.1.7 | Integer32 (1..214783647) | read-only | current |
| wwpLeosRsvpteRfrshSlewDenom OBJECT-TYPE The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value. | 1.3.6.1.4.1.6141.2.60.30.1.1.8 | Integer32 (1..214783647) | read-only | current |
| wwpLeosRsvpteRfrshSlewNumerator OBJECT-TYPE The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value. | 1.3.6.1.4.1.6141.2.60.30.1.1.9 | Integer32 (1..214783647) | read-only | current |
| wwpLeosRsvpteBlockadeMultiple OBJECT-TYPE The RSVP-TE value, Kb, which is the number of refresh timeout periods after which blockade state is deleted. | 1.3.6.1.4.1.6141.2.60.30.1.1.10 | Integer32 (1..214783647) | read-only | current |
| wwpLeosRsvpteLSPSetupPriority OBJECT-TYPE The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically more or equal (so lower or equal priority) than the value of the holding priority object. | 1.3.6.1.4.1.6141.2.60.30.1.1.11 | Integer32 (0..7) | read-only | current |
| wwpLeosRsvpteLSPHoldingPriority OBJECT-TYPE The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less or equal (so higher or equal priority) than the value of the holding priority object. | 1.3.6.1.4.1.6141.2.60.30.1.1.12 | Integer32 (0..7) | read-only | current |
| wwpLeosRsvpteUseHopByHop OBJECT-TYPE A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for PATH and PATH-TEAR messages it sends. If set then the IP addresses used in the IP header of PATH messages forwarded by RSVP-TE set source as the local outgoing interface IP address, and destination as the next hop router IP address. | 1.3.6.1.4.1.6141.2.60.30.1.1.13 | TruthValue | read-only | current |
| wwpLeosRsvpteRestartCapable OBJECT-TYPE A flag to indicate whether the local node should advertise itself as restart capable. | 1.3.6.1.4.1.6141.2.60.30.1.1.14 | TruthValue | read-only | current |
| wwpLeosRsvpteRestartTime OBJECT-TYPE The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. Only used if wwpLeosRsvpteRestartCapable is set to true. | 1.3.6.1.4.1.6141.2.60.30.1.1.15 | Unsigned32 | read-only | current |
| wwpLeosRsvpteRecoveryTime OBJECT-TYPE The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors in the Restart_Cap object in Hello messages. A value of zero indicates that the node does not support resynchronization following failure of the local node. A value of 0xFFFFFFFF indicates an infinite recovery time. Only used if wwpLeosRsvpteRestartCapable is set to true. | 1.3.6.1.4.1.6141.2.60.30.1.1.16 | Unsigned32 | read-only | current |
| wwpLeosRsvpteMinPeerRestart OBJECT-TYPE The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP-TE will wait for the maximum of this time and the restart_time advertised in the RESTART_CAP object in Hello messages from the neighbor. | 1.3.6.1.4.1.6141.2.60.30.1.1.17 | Integer32 | read-only | current |
| wwpLeosRsvpte OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.30.1.2 | |||
| wwpLeosRsvpteIfTable OBJECT-TYPE A table of interfaces that RSVP-TE can be enabled on. | 1.3.6.1.4.1.6141.2.60.30.1.2.1 | not-accessible | current | |
| wwpLeosRsvpteIfEntry OBJECT-TYPE WWP Descr. | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1 | not-accessible | current | |
| wwpLeosRsvpteIfName OBJECT-TYPE Interface Name | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.1 | DisplayString (SIZE(0..32)) | read-only | current |
| wwpLeosRsvpteIfIndex OBJECT-TYPE Interface Index | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.2 | INTEGER (1..4096) | not-accessible | current |
| wwpLeosRsvpteIfIpAddr OBJECT-TYPE Interface IP Address | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.3 | IpAddress | read-only | current |
| wwpLeosRsvpteIfMtu OBJECT-TYPE RSVP-TE Interface MTU | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.4 | INTEGER (1500..9216) | read-write | current |
| wwpLeosRsvpteIfAdminStatus OBJECT-TYPE Desired RSVP-TE status on this Interface | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.5 | INTEGER {enable(1), disable(2)} | read-write | current |
| wwpLeosRsvpteIfOperStatus OBJECT-TYPE RSVP-TE Operational Status on this Interface | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.6 | INTEGER {up(1), down(2)} | read-only | current |
| wwpLeosRsvpteIfHelloInterval OBJECT-TYPE RSVP-TE hello message interval. | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.7 | Unsigned32 (0..30) | read-write | current |
| wwpLeosRsvpteIfHelloTolerance OBJECT-TYPE RSVP-TE hello tolerance defines number of hello interval which may pass without receiving a successful Hello message from a partner before the Hello session times out. | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.8 | Unsigned32 (0..10) | read-write | current |
| wwpLeosRsvpteIfAdvertisedLabel OBJECT-TYPE This attribute decides what kind of a Label will be advertised by RSVP-TE for a Label Request received on this L3 Interface | 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.9 | AdvertisedLabel | read-write | current |