MIBs Depot

WWP-LEOS-PORT-XCVR-MIB

Registered at
1.3.6.1.4.1.6141.2.60.4
Last updated
2013-05-31 00:00
Organization
Ciena, Inc
Revisions
2013-05-31 00:00, 2013-04-23 00:00, 2011-07-06 00:00, 2011-05-24 00:00, 2011-03-08 00:00, 2010-02-01 00:00, 2006-03-15 00:00, 2001-04-03 17:00
Namespace
ciena
Source file
WWP-LEOS-PORT-XCVR-MIB
Digest
sha256:cc67f872f3d2e723afc78b5c469b2611cf4886ab8b2549330ac1673a5fd2d39c

Description

The MIB module for the WWP System physical transceiver devices.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue
WWP-SMIwwpModulesLeos

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WWP-LEOS-PORT-XCVR-MIB
WWP-SMI

Objects

NameOIDSyntaxAccessStatus
wwpLeosPortXcvrMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.1
wwpLeosPortXcvr
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.1.1
wwpLeosPortXcvrTable
OBJECT-TYPE
This table contains descriptions and settings for each of the physical transceiver devices.
1.3.6.1.4.1.6141.2.60.4.1.1.1not-accessiblecurrent
wwpLeosPortXcvrEntry
OBJECT-TYPE
The Transceiver Device Entry.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1not-accessiblecurrent
wwpLeosPortXcvrId
OBJECT-TYPE
The ID for the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrOperState
OBJECT-TYPE
The operational state of the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2INTEGER {disabled(1), enabled(2), loopback(3), notPresent(4), faulted(5)}read-onlycurrent
wwpLeosPortXcvrIdentiferType
OBJECT-TYPE
Type for the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3INTEGER {unknown(1), gbic(2), solderedType(3), sfp(4), reserved(5), vendorSpecific(6), xbi(7), xenpak(8), xfp(9), xff(10), xfpe(11), xpak(12), x2(13)}read-onlycurrent
wwpLeosPortXcvrExtIdentiferType
OBJECT-TYPE
Extended identifier type for this transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4INTEGER {unknown(1), sfp-gbic(2)}read-onlycurrent
wwpLeosPortXcvrConnectorType
OBJECT-TYPE
Type of connector. unknown(1), sc(2), fiberChannelStyle1(3), fiberChannelStyle2(4), bnc/tnc(5), coaxialHeader(6), fiberJack(7), lc(8), mt-rj(9), mu(10), sg(11), opticalPitTail(12), reserved(13..32), hssdc(33), copperPitTail(34), reserved(35..128), vendorSpecific(129..256).
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrType
OBJECT-TYPE
Type of Transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrVendorName
OBJECT-TYPE
String containing this transceiver's vendor name.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7DisplayStringread-onlycurrent
wwpLeosPortXcvrVendorOUI
OBJECT-TYPE
String containing this transceiver's vendor OUI.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8OCTET STRING (SIZE(0..255))read-onlycurrent
wwpLeosPortXcvrVendorPN
OBJECT-TYPE
String containing this transceiver's vendor OUI.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9DisplayStringread-onlycurrent
wwpLeosPortXcvrRevNum
OBJECT-TYPE
String containing this transceiver's part revision number.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10DisplayStringread-onlycurrent
wwpLeosPortXcvrSerialNum
OBJECT-TYPE
String containing this transceiver's part serial number.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11DisplayStringread-onlycurrent
wwpLeosPortXcvrEncodingType
OBJECT-TYPE
If wwpLeosPortXcvrIdentiferType is SFP, the following values are defined for the encoding type: unspecified(1), 8B10B(2), 4b5b(3), NRZ(4), Manchester(5), SONET(6), reserved(7-256) If wwpLeosPortXcvrIdentiferType is XFP, the following values are defined for the encoding type: Bit 7: 64B/66B (yes/no) Bit 6: 8B10B (yes/no) Bit 5: Sonet Scrambled (yes/no) Bit 4: NRZ (yes/no) Bit 3: RZ (yes/no) Bit 2: Tx Dither Support (yes/no) Bit 1: Reserved Bit 0: Reserved Multiple bits can be set at once in the case of XFP. For instance, to indicate support for NRZ(4) and Sonet scrambled (5), the user sees this object with the value of 16 + 32 = 48
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrMfgDate
OBJECT-TYPE
String containing the transceiver manufacture date.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13DisplayStringread-onlycurrent
wwpLeosPortXcvrComplianceVer
OBJECT-TYPE
This represents the compliance version. Value 1 means digital diagnostic functionality not included or undefined Value 2 means includes functionality defined in Rev 9.0 SFF-8472 Value 3 means TBD Value 4 means TBD.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14Integer32 (1..4)read-onlycurrent
wwpLeosPortXcvrWaveLength
OBJECT-TYPE
This represents the wavelength of the transceiver. Units are nano meter.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrTemperature
OBJECT-TYPE
This represents the temperature of the transceiver. Units are in degrees C
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrVcc
OBJECT-TYPE
This represents the voltage of the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrBias
OBJECT-TYPE
This represents the bias of the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrRxPower
OBJECT-TYPE
This represents the measured receive power of the transceiver. Units are micro Watts.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrTxState
OBJECT-TYPE
Indicates whether this transceiver is currently set to transmit.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20INTEGER {enabled(1), disabled(2)}read-onlycurrent
wwpLeosPortXcvrTxFaultStatus
OBJECT-TYPE
Indicates the fault status of this transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21INTEGER {fault(1), noFault(2)}read-onlycurrent
wwpLeosPortXcvrRxRateStatus
OBJECT-TYPE
Indicates the Rx rate status of this transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22INTEGER {enabled(1), disabled(2)}read-onlycurrent
wwpLeosPortXcvr9by125um
OBJECT-TYPE
Indicates the link length for 9/125um fiber.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvr50by125um
OBJECT-TYPE
Indicates the link length for 50/125um fiber.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvr62dot5by125um
OBJECT-TYPE
Indicates the link length for 62.5/125um fiber.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrCu
OBJECT-TYPE
Indicates the link length for copper.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrTxOutputPw
OBJECT-TYPE
Indicates the Tx Output power for the transceiver. Units are micro Watts.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrLosState
OBJECT-TYPE
Indicates the Loss Of Signal State for the optical transceiver. Ports without optical transceiver will always report 'false'.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28TruthValueread-onlycurrent
wwpLeosPortXcvrDiagSupported
OBJECT-TYPE
Indicates if diagnostics are supported on this transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29TruthValueread-onlycurrent
wwpLeosPortXcvrEnhDiagAlarmSupported
OBJECT-TYPE
Indicates if enhanced diagnostics alarms / warnings implemented.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30TruthValueread-onlycurrent
wwpLeosPortXcvrEnhDiagSoftTxDisableSupported
OBJECT-TYPE
Indicates if enhanced diagnostics soft Tx disable control is implemented.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31TruthValueread-onlycurrent
wwpLeosPortXcvrEnhDiagSoftTxFaultSupported
OBJECT-TYPE
Indicates if enhanced diagnostics soft Tx fault monitoring is implemented.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32TruthValueread-onlycurrent
wwpLeosPortXcvrEnhDiagRxLosSupported
OBJECT-TYPE
Indicates if enhanced diagnostics Rx LOS monitoring is implemented.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33TruthValueread-onlycurrent
wwpLeosPortXcvrHighTempAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for temperature alarm.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34Integer32read-onlycurrent
wwpLeosPortXcvrLowTempAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for temperature alarm.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35Integer32read-onlycurrent
wwpLeosPortXcvrHighVccAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for voltage alarm.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36Integer32read-onlycurrent
wwpLeosPortXcvrLowVccAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for voltage alarm.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37Integer32read-onlycurrent
wwpLeosPortXcvrHighBiasAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for bias alarm.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38Integer32read-onlycurrent
wwpLeosPortXcvrLowBiasAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for bias alarm.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39Integer32read-onlycurrent
wwpLeosPortXcvrHighTxPwAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for Tx power alarm. Units are micro watts
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40Integer32read-onlycurrent
wwpLeosPortXcvrLowTxPwAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for Tx power alarm. Units are micro watts.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41Integer32read-onlycurrent
wwpLeosPortXcvrHighRxPwAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for Rx power alarm. Units are micro watts.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42Integer32read-onlycurrent
wwpLeosPortXcvrLowRxPwAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for Rx power alarm. Units are micro watts.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43Integer32read-onlycurrent
wwpLeosPortXcvrEnhDiagRateSelectSupported
OBJECT-TYPE
Indicates if enhanced diagnostics soft rate select control is implemented.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44TruthValueread-onlycurrent
wwpLeosPortXcvrAdminState
OBJECT-TYPE
The admin state of the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45INTEGER {disabled(1), enabled(2), loopback(3)}read-writedeprecated
wwpLeosPortXcvrXfpMinBitRate
OBJECT-TYPE
This represents the minimum bit rate.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMaxBitRate
OBJECT-TYPE
This represents the maximum bit rate.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpLinkLenSmf1km
OBJECT-TYPE
This represents the length (SMF fiber) 1km.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpLinkLenE50u2m
OBJECT-TYPE
This represents the length (ext. BW MMF) 2m.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpLinkLen50u1m
OBJECT-TYPE
This represents the length (50um) 1m.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpLinkLen62dot5u1m
OBJECT-TYPE
This represents the length (62.5um) 1m.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpLinkLenCopper1m
OBJECT-TYPE
This represents the length (copper) 1m.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpDevTech
OBJECT-TYPE
This represents the device technology.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77INTEGER {vcsel850nm(1), vcsel1310nm(2), vcsel1550nm(3), fp1310nm(4), dfb1310nm(5), dfb1550nm(6), eml1310nm(7), eml1550nm(8), copperOrOther(9), tunable1550nm(10), reserved(11)}read-onlycurrent
wwpLeosPortXcvrXfpTransmitterTech
OBJECT-TYPE
This represents the device transmitter technology: Bit 3: Wavelength Control (active/none) Bit 2: Transmitter Cooling (cooled/uncooled) Bit 1: Detector Type (apd/pin) Bit 0: Transmitter Tuning (Tunable/non-Tunable)
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpCdrSupport
OBJECT-TYPE
This represents the CDR support: Bit 7: 9.95 Gb/s (yes/no) Bit 6: 10.3 Gb/s (yes/no) Bit 5: 10.5 Gb/s (yes/no) Bit 4: 10.7 Gb/s (yes/no) Bit 3: 11.1 Gb/s (yes/no) Bit 2: N/A Bit 1: Lineside Loopback (yes/no) Bit 0: XFI Loopback (yes/no)
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpWaveLengthTol
OBJECT-TYPE
This represents the wavelength tolerance.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMaxCaseTemp
OBJECT-TYPE
This represents the maximum case temperature.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMaxPower
OBJECT-TYPE
This represents the maximum power dissipation.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMax5vCurrent
OBJECT-TYPE
This represents the 5.0 Volt Max Current.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMax3p3vCurrent
OBJECT-TYPE
This represents the 3.3 Volt Max Current.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMax1p8vCurrent
OBJECT-TYPE
This represents the 1.8 Volt Max Current.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpMaxNeg5p2vCurrent
OBJECT-TYPE
This represents the -5.2 Volt Max Current.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpDiagMonitorType
OBJECT-TYPE
This represents the diag monitor type: Bit 4 indicates BER support. Bit 3 indicates the Rx Power Meas. type of Avg or OMA.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpEnhancedOptions
OBJECT-TYPE
This represents the enhanced options: Bit 7: VPS Support (yes/no) Bit 6: Soft TX_DISABLE (yes/no) Bit 5: Soft P_down (yes/no) Bit 4: VPS LV Regulator Mode (yes/no) Bit 3: VPS bypassed Reg. Mode (yes/no) Bit 2: Active FEC Ctrl (yes/no) Bit 1: Wavelength or frequency Tunability (yes/no) Bit 0: CMU Support Mode (yes/no)
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpAuxMonitoringInput1
OBJECT-TYPE
This represents the Aux monitoring of A/D input 1.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89INTEGER {none(1), aPDBiasVoltage(2), reserved(3), tECCurrentMa(4), laserTemp(5), laserWavelength(6), voltage5V(7), voltage3p3V(8), voltage1p8V(9), voltageNeg5p2V(10), voltage5VCurrent(11), voltage3p3VCurrent(12), voltage1p8VCurrent(13), voltageNeg5p2VCurrent(14), unknown(15)}read-onlycurrent
wwpLeosPortXcvrXfpAuxMonitoringInput2
OBJECT-TYPE
This represents the Aux monitoring of A/D input 2.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90INTEGER {none(1), aPDBiasVoltage(2), reserved(3), tECCurrentMa(4), laserTemp(5), laserWavelength(6), voltage5V(7), voltage3p3V(8), voltage1p8V(9), voltageNeg5p2V(10), voltage5VCurrent(11), voltage3p3VCurrent(12), voltage1p8VCurrent(13), voltageNeg5p2VCurrent(14), unknown(15)}read-onlycurrent
wwpLeosPortXcvrAdminFrequency
OBJECT-TYPE
The administrative frequency of the transceiver in GHz.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91Unsigned32 (0..-1)read-writecurrent
wwpLeosPortXcvrXfpLaserFirstFrequency
OBJECT-TYPE
This represents the first frequency in GHz.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92Unsigned32 (0..-1)read-onlycurrent
wwpLeosPortXcvrXfpLaserLastFrquency
OBJECT-TYPE
This represents the last frequency in GHz.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93Unsigned32 (0..-1)read-onlycurrent
wwpLeosPortXcvrXfpMaxGridScacing
OBJECT-TYPE
This represents the maximum support grid spacing in GHz.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94Integer32 (0..65535)read-onlycurrent
wwpLeosPortXcvrXfpChannelNum
OBJECT-TYPE
This represents the channel number.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95Integer32 (1..65535)read-onlycurrent
wwpLeosPortXcvrXfpFrequencyError
OBJECT-TYPE
This represents the frequency error.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96Integer32 (-32768..32767)read-onlycurrent
wwpLeosPortXcvrAdminWavelength
OBJECT-TYPE
The administrative wavelength of the transceiver in picometers.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97Unsigned32read-writecurrent
wwpLeosPortXcvrAdminChannel
OBJECT-TYPE
The administrative channel number of the transceiver.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98Unsigned32read-writecurrent
wwpLeosPortXcvrXfpLaserFirstWavelenth
OBJECT-TYPE
This represents the first wavelength in picometers.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99Unsigned32read-onlycurrent
wwpLeosPortXcvrXfpLaserLastWavelength
OBJECT-TYPE
This represents the last wavelength in picometers.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100Unsigned32read-onlycurrent
wwpLeosPortXcvrXfpLaserFirstChannel
OBJECT-TYPE
This represents the first channel number.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101Unsigned32read-onlycurrent
wwpLeosPortXcvrXfpLaserLastChannel
OBJECT-TYPE
This represents the last channel number.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102Unsigned32read-onlycurrent
wwpLeosPortXcvrOperFrequency
OBJECT-TYPE
The operational frequency of the transceiver in GHz.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103Unsigned32read-onlycurrent
wwpLeosPortXcvrOperWavelength
OBJECT-TYPE
The operational wavelength of the transceiver in picometers.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104Unsigned32read-onlycurrent
wwpLeosPortXcvrRxDbmPower
OBJECT-TYPE
Indicates the Rx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105Integer32read-onlycurrent
wwpLeosPortXcvrTxDbmPower
OBJECT-TYPE
Indicates the Tx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106Integer32read-onlycurrent
wwpLeosPortXcvrHighTxDbmPwAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107Integer32read-onlycurrent
wwpLeosPortXcvrLowTxDbmPwAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108Integer32read-onlycurrent
wwpLeosPortXcvrHighRxDbmPwAlarmThreshold
OBJECT-TYPE
Indicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109Integer32read-onlycurrent
wwpLeosPortXcvrLowRxDbmPwAlarmThreshold
OBJECT-TYPE
Indicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,000.
1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110Integer32read-onlycurrent
wwpLeosPortXcvrNotif
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.1.2
wwpLeosPortXcvrEventType
OBJECT-TYPE
Indicates if the Xcvr specified by the wwpLeosPortXcvrId has come up, gone down or has been selected.
1.3.6.1.4.1.6141.2.60.4.1.2.1INTEGER {inserted(1), removed(2), enabled(3), disabled(4)}read-onlycurrent
wwpLeosPortXcvrErrorType
OBJECT-TYPE
Indicates if the Xcvr specified by the wwpLeosPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if transceiver has been detected faulted, otherwise it returns 'none'.
1.3.6.1.4.1.6141.2.60.4.1.2.2INTEGER {none(0), chksumFailed(1), opticalFault(2)}read-onlycurrent
wwpLeosPortXcvrMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.2
wwpLeosPortXcvrMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.2.0
wwpLeosPortXcvrMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.3
wwpLeosPortXcvrMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.3.1
wwpLeosPortXcvrMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.4.3.2

Notifications

NameOIDStatus
wwpLeosPortXcvrLinkStateChangeNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrLinkStateChangeNotification is sent if the Xcvr state has changed.
1.3.6.1.4.1.6141.2.60.4.2.0.4current
wwpLeosPortXcvrErrorTypeNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason. Reason of failure is specified by wwpLeosPortXcvrErrorType.
1.3.6.1.4.1.6141.2.60.4.2.0.5current
wwpLeosPortXcvrTempHighNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.6current
wwpLeosPortXcvrTempLowNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.7current
wwpLeosPortXcvrTempNormalNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTempNormalNotification is sent if the Xcvr temperature returns back to normal state.
1.3.6.1.4.1.6141.2.60.4.2.0.8current
wwpLeosPortXcvrVoltageHighNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.9current
wwpLeosPortXcvrVoltageLowNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.10current
wwpLeosPortXcvrVoltageNormalNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrVoltageNormalNotification is sent if the Xcvr voltage returns back to normal state.
1.3.6.1.4.1.6141.2.60.4.2.0.11current
wwpLeosPortXcvrBiasHighNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.12current
wwpLeosPortXcvrBiasLowNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.13current
wwpLeosPortXcvrBiasNormalNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrBiasNormalNotification is sent if the Xcvr Bias returns back to normal state.
1.3.6.1.4.1.6141.2.60.4.2.0.14current
wwpLeosPortXcvrTxPowerHighNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.15current
wwpLeosPortXcvrTxPowerLowNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr voltage decreases the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.16current
wwpLeosPortXcvrTxPowerNormalNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTxPowerNormalNotification is sent if the Xcvr TxPower returns back to normal state.
1.3.6.1.4.1.6141.2.60.4.2.0.17current
wwpLeosPortXcvrRxPowerHighNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.18current
wwpLeosPortXcvrRxPowerLowNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr voltage decreases the threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.19current
wwpLeosPortXcvrRxPowerNormalNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrRxPowerNormalNotification is sent if the Xcvr RxPower returns back to normal state.
1.3.6.1.4.1.6141.2.60.4.2.0.20current
wwpLeosPortXcvrSpeedInfoMissingNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrSpeedInfoMissingNotification is sent if the Xcvr speed information is not found.
1.3.6.1.4.1.6141.2.60.4.2.0.21current
wwpLeosPortXcvrBiasHighWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.22current
wwpLeosPortXcvrBiasLowWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases below the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.23current
wwpLeosPortXcvrTempHighWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.24current
wwpLeosPortXcvrTempLowWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases below the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.25current
wwpLeosPortXcvrVoltageHighWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.26current
wwpLeosPortXcvrVoltageLowWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases below the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.27current
wwpLeosPortXcvrTxPowerHighWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.28current
wwpLeosPortXcvrTxPowerLowWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr TxPower decreases below the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.29current
wwpLeosPortXcvrRxPowerHighWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.30current
wwpLeosPortXcvrRxPowerLowWarningNotification
NOTIFICATION-TYPE
A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr RxPower decreases below the warning threshold.
1.3.6.1.4.1.6141.2.60.4.2.0.31current