WWP-LEOS-PING-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.19
- Last updated
- 2012-04-02 00:00
- Organization
- Ciena, Inc
- Revisions
- 2012-04-02 00:00, 2001-07-03 12:57
- Namespace
- ciena
- Source file
WWP-LEOS-PING-MIB- Digest
sha256:de437514204f762b719705e965c9ff0c640d67d442146b9b457f6ffc55e0f8e7
Description
The MIB for WWP Ping
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| INET-ADDRESS-MIB | InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-PING-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PingFailCause TEXTUAL-CONVENTION The cause of the last ping failure. | current | |||
| PingState TEXTUAL-CONVENTION The state of the last ping request. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosPingMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.19.1 | |||
| wwpLeosPingDelay OBJECT-TYPE The object specifies the minimum amount of time to wait before sending the next packet in a sequence after receiving a response or declaring a timeout for a previous packet. | 1.3.6.1.4.1.6141.2.60.19.1.1 | Integer32 (0..100000) | read-write | current |
| wwpLeosPingPacketSize OBJECT-TYPE The size of the ping packets to send to the target. | 1.3.6.1.4.1.6141.2.60.19.1.2 | Integer32 (1..1464) | read-write | current |
| wwpLeosPingActivate OBJECT-TYPE Ping can be activated by setting this object to true. Once the ping operation is completed, the object is set to 'false'. This object can be set to 'false' by the Management Station to stop the ping. | 1.3.6.1.4.1.6141.2.60.19.1.3 | TruthValue | read-write | current |
| wwpLeosPingAddrType OBJECT-TYPE The address type associated with wwpLeosPingAddr. With the new wwpLeosPingInetAddrType being introduced to support RFC 4001, this OID will only be used when wwpLeosPingAddr is a host name or an IPv4 address. Otherwise, it will be set to other(0). | 1.3.6.1.4.1.6141.2.60.19.1.4 | AddressFamilyNumbers | read-only | current |
| wwpLeosPingAddr OBJECT-TYPE The host name or IP address of the device to be pinged. wwpLeosPingAddrType determines if address is host name or IP address. | 1.3.6.1.4.1.6141.2.60.19.1.5 | DisplayString | read-write | current |
| wwpLeosPingPacketCount OBJECT-TYPE Specifies the number of ICMP requests to send to the target. | 1.3.6.1.4.1.6141.2.60.19.1.6 | Integer32 (0..100000) | read-write | current |
| wwpLeosPingPacketTimeout OBJECT-TYPE Specifies the amount of time to wait for a response to a transmitted packet before declaring the packet 'dropped'. | 1.3.6.1.4.1.6141.2.60.19.1.7 | Integer32 (0..100000) | read-write | current |
| wwpLeosPingSentPackets OBJECT-TYPE The number of ping packets that have been sent to the target. | 1.3.6.1.4.1.6141.2.60.19.1.8 | Counter32 | read-only | current |
| wwpLeosPingReceivedPackets OBJECT-TYPE The number of ping packets that have been received from the target. | 1.3.6.1.4.1.6141.2.60.19.1.9 | Counter32 | read-only | current |
| wwpLeosPingFailCause OBJECT-TYPE The result of the ping. | 1.3.6.1.4.1.6141.2.60.19.1.10 | PingFailCause | read-only | current |
| wwpLeosPingState OBJECT-TYPE The state of the ping process. The possible states include pinging, idle, complete or failed. | 1.3.6.1.4.1.6141.2.60.19.1.11 | PingState | read-only | current |
| wwpLeosPingUntilStopped OBJECT-TYPE Setting this object to true prior to wwpLeosPingActivate will cause the device to ping the specified host until wwpLeosPingActivate is set to false. The object cannot be modified once the ping is active. The object returns to 'false' once the ping is halted. | 1.3.6.1.4.1.6141.2.60.19.1.12 | TruthValue | read-write | current |
| wwpLeosPingInetAddrType OBJECT-TYPE The Inet address type associated with wwpLeosPingAddr. When set to: ipv4 : wwpLeosPingAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : wwpLeosPingAddr should be compliant with InetAddressIPv6 from RFC 4001. | 1.3.6.1.4.1.6141.2.60.19.1.13 | InetAddressType | read-only | current |