WWP-LEOS-NTP-CLIENT-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.18
- Last updated
- 2012-09-12 00:00
- Organization
- Ciena, Inc
- Revisions
- 2012-09-12 00:00, 2012-05-31 00:00, 2012-03-27 00:00, 2011-07-05 00:00, 2011-03-29 12:00, 2008-05-20 00:00, 2007-12-20 00:00, 2007-07-15 10:00, 2003-04-11 17:00
- Namespace
- ciena
- Source file
WWP-LEOS-NTP-CLIENT-MIB- Digest
sha256:fcc8241376694bc751c80f5ee11c55b4f31de1d006a65e862547118828035393
Description
This MIB module defines the managed objects for the NTP client on LEOS based WWP devices.
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
IANA-ADDRESS-FAMILY-NUMBERS-MIB INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-NTP-CLIENT-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| Md5Key TEXTUAL-CONVENTION Represents the textual convention which defines the name string and display hint | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosNtpClientMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.1 | |||
| wwpLeosNtpClient OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.1.1 | |||
| wwpLeosNtpClientState OBJECT-TYPE Setting this object to 'enable' will enable the NTP client on Ciena devices. | 1.3.6.1.4.1.6141.2.60.18.1.1.1 | INTEGER {enable(1), disable(2)} | read-write | current |
| wwpLeosNtpClientMode OBJECT-TYPE Setting this object to 'broadcast' will cause the client not to poll the NTP server at all. Instead, it will wait for configured NTP servers to broadcast their current time. When the client receives the first message, it will retrieve a reliable time from that server. If it is set to polling then device will poll the NTP server. | 1.3.6.1.4.1.6141.2.60.18.1.1.2 | INTEGER {polling(1), broadcast(2)} | read-write | current |
| wwpLeosNtpClientPollFreq OBJECT-TYPE The polling frequency at which NTP server will be polled if the NTP client is configured to be in polling mode. The value of this object should be multiple of 16. The change in the NTP mode will only be effective when NTP client is enabled and should not be set at the same time either Min or Max polling frequency is set. | 1.3.6.1.4.1.6141.2.60.18.1.1.3 | Integer32 (16..4096) | read-write | current |
| wwpLeosNtpClientTable OBJECT-TYPE Table of NTP server information indexed by wwpLeosNtpServerIndex. To create an entry in the table, use SNMP multiple set operation and following objects must be set: wwpLeosNtpServerAddr and wwpLeosNtpServerStatus. To use MD5 authentication, wwpLeosNtpServerKeyId must be set at the time of creation along with wwpLeosNtpServerAddr and wwpLeosNtpServerStatus, otherwise no MD5 authentication will be used. | 1.3.6.1.4.1.6141.2.60.18.1.1.4 | not-accessible | current | |
| wwpLeosNtpClientEntry OBJECT-TYPE An entry for each NTP server. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1 | not-accessible | current | |
| wwpLeosNtpServerIndex OBJECT-TYPE Specifies the unique index of the entry. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.1 | Integer32 (1..10) | not-accessible | current |
| wwpLeosNtpServerAddrType OBJECT-TYPE Specifies the type of address wwpLeosNtpServerAddr belongs to. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.2 | AddressFamilyNumbers | read-write | current |
| wwpLeosNtpServerAddr OBJECT-TYPE The IP address or host name of the NTP server. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.3 | DisplayString | read-write | current |
| wwpLeosNtpServerResolvedAddr OBJECT-TYPE Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host name. If wwpLeosNtpServerAddr is set to IP address then wwpLeosNtpServerResolvedAddr will be the same as wwpLeosNtpServerAddr. If the IP address is an IPv6, this OID will be set to 0.0.0.0 and the wwpLeosNtpServerAddrType will be set to other(0). | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.4 | IpAddress | read-only | current |
| wwpLeosNtpServerUserPri OBJECT-TYPE This object is no longer implemented as the NTP client determines the server's relative priority or preference relative to other configured servers. Reads will always return 1 and writes will be quietly ignored. This object was once used to specify the user priority of the wwpLeosNtpServerAddr. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.5 | Integer32 (1..10) | read-write | deprecated |
| wwpLeosNtpServerDhcpPri OBJECT-TYPE This object is no longer implemented as the NTP client determines the server's relative priority or preference relative to other configured servers. Reads will always return 1 and writes will quietly be ignored. This object was once used to specify the dhcp priority of the wwpLeosNtpServerAddr. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.6 | Integer32 (1..10) | read-only | deprecated |
| wwpLeosNtpServerUserAdminState OBJECT-TYPE This object is used to specify the user admin state of the wwpLeosNtpServerAddr. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.7 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosNtpServerScope OBJECT-TYPE This object is used to specify the scope for the entry. It specifies if the entry is configured by dhcp/user/both. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.8 | INTEGER {user(1), dhcp(2), both(3)} | read-only | current |
| wwpLeosNtpServerOperState OBJECT-TYPE This object is used to specify the operational state of the wwpLeosNtpServerAddr. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.9 | INTEGER {enabled(1), disabled(2), notConfigured(3)} | read-only | current |
| wwpLeosNtpServerStatus OBJECT-TYPE To create a row in this table, a manager must set this object to 'createAndGo'. The server added will only be effective when NTP client is enabled. To create entry in the table use SNMP multiple set operation and following objects must be set wwpLeosNtpServerAddr and wwpLeosNtpServerStatus. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.10 | RowStatus | read-create | current |
| wwpLeosNtpServerKeyId OBJECT-TYPE This object is used to specify the MD5 key ID that that the server will use. A 0 key ID implies no MD5 key. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.11 | Unsigned32 (0..4294967295) | read-write | current |
| wwpLeosNtpServerState OBJECT-TYPE This object reflects the current connection status of the server. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.12 | INTEGER {reject(1), insane(2), correct(3), standby(4), candidate(5), selected(6), syspeer(7), ppspeer(8), reaching(255), error(256)} | read-only | current |
| wwpLeosNtpServerResolvedInetAddrType OBJECT-TYPE Specifies the type of address wwpLeosNtpServerResolvedInetAddr belongs to. When set to: ipv4 : wwpLeosNtpServerResolvedInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : wwpLeosNtpServerResolvedInetAddr should be compliant with InetAddressIPv6 from RFC 4001. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.13 | InetAddressType | read-only | current |
| wwpLeosNtpServerResolvedInetAddr OBJECT-TYPE Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host name. If wwpLeosNtpServerAddr is set to IP address then wwpLeosNtpServerResInetAddr will be the same as wwpLeosNtpServerAddr. The InetAddress specified here will be compliant with RFC 4001. | 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.14 | InetAddress | read-only | current |
| wwpLeosNtpAuthTable OBJECT-TYPE The (conceptual) table listing the key-id and MD5 key. | 1.3.6.1.4.1.6141.2.60.18.1.1.5 | not-accessible | current | |
| wwpLeosNtpAuthEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosNtpAuthTable. | 1.3.6.1.4.1.6141.2.60.18.1.1.5.1 | not-accessible | current | |
| wwpLeosNtpAuthKeyId OBJECT-TYPE This object specifies the key ID. It is also used as index in the table. | 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.1 | Unsigned32 (0..4294967295) | not-accessible | current |
| wwpLeosNtpAuthMd5Key OBJECT-TYPE Used to specify the MD5 key to use with this key identifier. | 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.2 | Md5Key (SIZE(1..31)) | read-write | current |
| wwpLeosNtpAuthRowStatus OBJECT-TYPE To create a row in this table, a manager must set this object to 'createAndGo'. The server added will only be effective when NTP client is enabled. To create entry in the table use SNMP multiple set operation and following objects must be set: wwpLeosNtpAuthKeyId and either wwpLeosNtpAuthMd5Key or wwpLeosNtpAuthMD5KeyEnc. | 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.3 | RowStatus | read-create | current |
| wwpLeosNtpAuthMD5KeyEnc OBJECT-TYPE Used to specify the encrypted MD5 key to use with this key identifier. | 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.4 | Md5Key (SIZE(1..64)) | read-write | current |
| wwpLeosNtpClientMD5State OBJECT-TYPE Set to true to use MD5 authentication for NTP | 1.3.6.1.4.1.6141.2.60.18.1.1.6 | TruthValue | read-write | current |
| wwpLeosNtpClientDrift OBJECT-TYPE The Drift in micro-seconds of the local clock. This value is only valid when NTP is enabled and has a valid peer. | 1.3.6.1.4.1.6141.2.60.18.1.1.7 | Integer32 | read-only | current |
| wwpLeosNtpClientFastOffset OBJECT-TYPE The Fastest Offset seen in micro-seconds of the local clock. This value is only valid when NTP is enabled and has a valid peer. | 1.3.6.1.4.1.6141.2.60.18.1.1.9 | Integer32 | read-only | current |
| wwpLeosNtpClientSlowOffset OBJECT-TYPE The Slowest Offset seen in micro-seconds of the local clock. This value is only valid when NTP is enabled and has a valid peer. | 1.3.6.1.4.1.6141.2.60.18.1.1.10 | Integer32 | read-only | current |
| wwpLeosNtpClientMinPollFreq OBJECT-TYPE The polling freq at which NTP server will be polled if the NTP client is configured to be in polling mode and is not currently synchronized to an NTP server. The value of this object should be multiple of 16. The change in the ntp mode will only be affective when ntp client is enabled and should not be set at the same time PollFreq is set. | 1.3.6.1.4.1.6141.2.60.18.1.1.11 | Integer32 (16..4096) | read-write | current |
| wwpLeosNtpClientMaxPollFreq OBJECT-TYPE The polling freq at which NTP server will be polled if the NTP client is configured to be in polling mode and is currently synchronized to an NTP server. The value of this object should be multiple of 16. The change in the ntp mode will only be affective when ntp client is enabled and should not be set at the same time PollFreq is set. | 1.3.6.1.4.1.6141.2.60.18.1.1.12 | Integer32 (16..4096) | read-write | current |
| wwpLeosNtpClientOffset OBJECT-TYPE When NTP is synchronized, this contains the difference between the reference clock and the system clock micro-seconds. | 1.3.6.1.4.1.6141.2.60.18.1.1.13 | Integer32 | read-only | deprecated |
| wwpLeosNtpClientDelay OBJECT-TYPE When NTP is synchronized, this indicates the round trip time in micro-seconds taken by the reply packet to return in response, to a query sent by the server. | 1.3.6.1.4.1.6141.2.60.18.1.1.14 | Integer32 | read-only | current |
| wwpLeosNtpClientJitter OBJECT-TYPE When NTP is synchronized, it indicates the magnitude of jitter between several time queries in micro-seconds. | 1.3.6.1.4.1.6141.2.60.18.1.1.15 | Integer32 | read-only | current |
| wwpLeosNtpClientNtpOffset OBJECT-TYPE When NTP is synchronized, this contains the difference between the reference clock and the system clock micro-seconds. | 1.3.6.1.4.1.6141.2.60.18.1.1.16 | Integer32 | read-only | current |
| wwpLeosNtpClientNtpFastStartMode OBJECT-TYPE Setting this object to 'on' will cause the NTP client to set it's time to the first reply received from a synchronized NTP server, the first time this occurs after the NTP client is enabled. After that, the normal rules for selecting and synchronizing to a server are used. | 1.3.6.1.4.1.6141.2.60.18.1.1.17 | INTEGER {on(1), off(2)} | read-write | current |
| wwpLeosNtpMulticastTable OBJECT-TYPE Table of NTP Multicast Addresses indexed by wwpLeosNtpMulticastIndex. To create an entry in the table, use SNMP multiple set operation and following objects must be set: wwpLeosNtpMulticastInetAddrType and wwpLeosNtpMulticastInetAddr. | 1.3.6.1.4.1.6141.2.60.18.1.1.18 | not-accessible | current | |
| wwpLeosNtpMulticastEntry OBJECT-TYPE An entry for each NTP multicast addresses. | 1.3.6.1.4.1.6141.2.60.18.1.1.18.1 | not-accessible | current | |
| wwpLeosNtpMulticastIndex OBJECT-TYPE Specifies the unique index of the entry. | 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.1 | Integer32 (1..10) | not-accessible | current |
| wwpLeosNtpMulticastInetAddrType OBJECT-TYPE Specifies the type of address wwpLeosNtpMulticastInetAddr belongs to. When set to: ipv4 : wwpLeosNtpMulticastInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6 : wwpLeosNtpMulticastInetAddr should be compliant with InetAddressIPv6 from RFC 4001. | 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.2 | InetAddressType | read-write | current |
| wwpLeosNtpMulticastInetAddr OBJECT-TYPE Specifies the NTP multicast address. The InetAddress specified here will be compliant with RFC 4001. | 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.3 | InetAddress | read-write | current |
| wwpLeosNtpMulticastRowStatus OBJECT-TYPE To create a row in this table, a manager must set this object to 'createAndGo'. To create entry in the table use SNMP multiple set operation and following objects must be set: wwpLeosNtpMulticastInetAddrType, wwpLeosNtpMulticastInetAddr and wwpLeosNtpMulticastRowStatus. | 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.4 | RowStatus | read-create | current |
| wwpLeosNtpClientSyncChangeNotifAdminState OBJECT-TYPE Set to on to turn on sync change notifications. | 1.3.6.1.4.1.6141.2.60.18.1.1.19 | INTEGER {on(1), off(2)} | read-write | current |
| wwpLeosNtpClientNotifAttrs OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.1.2 | |||
| wwpLeosNtpClientSyncState OBJECT-TYPE This object indicates the synchronized state of the NTP client. | 1.3.6.1.4.1.6141.2.60.18.1.2.1 | INTEGER {synchronized(1), not-synchronized(2)} | read-only | current |
| wwpLeosNtpClientMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.2 | |||
| wwpLeosNtpClientMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.2.0 | |||
| wwpLeosNtpClientMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.3 | |||
| wwpLeosNtpClientMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.3.1 | |||
| wwpLeosNtpClientMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.18.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| wwpLeosNtpClientSyncStatusChangeNotification NOTIFICATION-TYPE This notification is sent whenever there is a change in the synchronization state for the NTP client. wwpLeosNtpClientSyncChangeNotifAdminState should be enabled to receive this trap. | 1.3.6.1.4.1.6141.2.60.18.2.0.1 | current |