WWP-LEOS-MULTICAST-FILTER-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.7
- Last updated
- 2008-10-02 19:00
- Organization
- Ciena, Inc
- Revisions
- 2008-10-02 19:00, 2008-06-19 00:00, 2003-02-10 17:00
- Namespace
- ciena
- Source file
WWP-LEOS-MULTICAST-FILTER-MIB- Digest
sha256:36f8acf723f76755b2b6eb40eba905df0c54d469471e688bb52b2d24a9a6486d
Description
This MIB specifies the managed objects for Multicast filter specific to the WWP Products.
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-MULTICAST-FILTER-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| VlanId TEXTUAL-CONVENTION A Vlan Id represents a Broadcast Domain. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosMcastFilterMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.1 | |||
| wwpLeosMcastFilterConfig OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.1.1 | |||
| wwpLeosMcastConfigState OBJECT-TYPE Setting this object will enable or disable multicast globally. | 1.3.6.1.4.1.6141.2.60.7.1.1.1 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosMcastFilterActivationTable OBJECT-TYPE The (conceptual) table listing the vlans on which the multicast filter can be applied. This table is used to create and delete entries in the multicast table and also to administratively enable/disable. To configure the IGMP Snooping on this VLAN use table wwpLeosMcastIgmpSnoopTable after creating entry in this (wwpLeosMcastFilterActivationTable) table. | 1.3.6.1.4.1.6141.2.60.7.1.1.2 | not-accessible | current | |
| wwpLeosMcastFilterActivationEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastFilterActivationTable. | 1.3.6.1.4.1.6141.2.60.7.1.1.2.1 | not-accessible | current | |
| wwpLeosMcastVlanId OBJECT-TYPE The VLAN for which this multicast filter can be enabled/disabled. | 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.1 | VlanId | read-only | current |
| wwpLeosMcastFilterAdminState OBJECT-TYPE Setting this object to enable will enable multicast on then given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosMcastFilterOperState OBJECT-TYPE The object represents the operational state of multicast on the given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.3 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| wwpLeosMcastFilterState OBJECT-TYPE Setting this object to createandgo(4) will create an entry in the multicast table for the given VLAN and will enable multicast on that VLAN. Setting this object to destroy will delete the entry from the multicast table. | 1.3.6.1.4.1.6141.2.60.7.1.1.2.1.4 | RowStatus | read-create | current |
| wwpLeosMcastFilterServerPortTable OBJECT-TYPE The (conceptual) table listing the authorized server ports. | 1.3.6.1.4.1.6141.2.60.7.1.1.3 | not-accessible | current | |
| wwpLeosMcastFilterServerPortEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastFilterServerPortTable. | 1.3.6.1.4.1.6141.2.60.7.1.1.3.1 | not-accessible | current | |
| wwpLeosMcastServerPortId OBJECT-TYPE The server port from which the IGMP query messages can be received, and joins/leaves messages can be sent. | 1.3.6.1.4.1.6141.2.60.7.1.1.3.1.1 | Integer32 (0..65535) | read-only | current |
| wwpLeosMcastServerPortStatus OBJECT-TYPE This object is used to add/delete server ports from the list of authorized server ports. To add a port to the authorized server port list, a user must set this object to 'createAndGo'. | 1.3.6.1.4.1.6141.2.60.7.1.1.3.1.2 | RowStatus | read-create | current |
| wwpLeosMcastIgmpSnoopTable OBJECT-TYPE The (conceptual) table listing the configuration parameters for the IGMP snooping. | 1.3.6.1.4.1.6141.2.60.7.1.1.4 | not-accessible | current | |
| wwpLeosMcastIgmpSnoopEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastIgmpSnoopTable. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1 | not-accessible | current | |
| wwpLeosMcastIgmpSnoopEnable OBJECT-TYPE For LEOS (4.x) IGMP snooping can be enabled on this VLAN by setting this object to 'true'. The Management station should define the router IP address range and the list of server ports before snooping is enabled. SAOS (6.x) does not support setting IGMP snooping per VLAN. Instead it should be enabled globally using the wwpLeosMcastSnoopState MIB object | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.1 | TruthValue | read-write | current |
| wwpLeosMcastIgmpSnoopRobustness OBJECT-TYPE The number of replies to send for each multicast group. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.2 | Integer32 (1..2) | read-write | current |
| wwpLeosMcastIgmpSnoopProxyQueryInterval OBJECT-TYPE The interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default will be 125 seconds. Note that the actual rate may be slower when the switch becomes busy, so this parameter should be thought of as a minimum time interval. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.3 | Integer32 (10..999999) | read-write | current |
| wwpLeosMcastIgmpSnoopProxyQueryReplyTmo OBJECT-TYPE The amount of time to receive a membership report after a query message was sent. This value goes directly into the query packet. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.4 | Integer32 (10..255) | read-write | current |
| wwpLeosMcastIgmpSnoopProxyQueryDelay OBJECT-TYPE The amount of time to wait before sending the next group specific query downstream. General queries are sent one port at a time. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.5 | Integer32 (1..100) | read-write | current |
| wwpLeosMcastIgmpSnoopLingerTmo OBJECT-TYPE This value specifies the amount of time that a multicast filter will be in place after the last host has left. In essence it configures how long to filter the stream after all the hosts have left the group. This can tune the system as to how long the router has to remove the stream from the subnet. The minimum value is 1 second, with no maximum value. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.6 | Integer32 (10..300) | read-write | current |
| wwpLeosMcastIgmpQueryEngineState OBJECT-TYPE Setting this object to disable will enable query engine on a given VLAN. Setting it to enable will enable it. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.7 | INTEGER {disable(1), enable(2)} | read-write | current |
| wwpLeosMcastIgmpProxyQuerySrcIp OBJECT-TYPE Setting this object will set the source ip address for the VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.8 | IpAddress | read-write | current |
| wwpLeosMcastIgmpRouterQueryInterval OBJECT-TYPE Setting this object will set the router query interval for given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.9 | Integer32 (10..999999) | read-write | current |
| wwpLeosMcastIgmpMinResponseTime OBJECT-TYPE Setting this object will set the minimum response time for given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.10 | Integer32 (50..600) | read-write | current |
| wwpLeosMcastIgmpDefaultRouterPort OBJECT-TYPE Setting this object will set the default router port for given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.11 | Integer32 (0..65535) | read-write | current |
| wwpLeosMcastIgmpInquisitiveLeaveState OBJECT-TYPE Setting this object will set the IGMP inquisitive leave state for given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.12 | INTEGER {disable(1), enable(2)} | read-write | current |
| wwpLeosMcastIgmpLastMemberQueryInterval OBJECT-TYPE Setting this object will set the last membership query interval for given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.13 | Integer32 (10..100) | read-write | current |
| wwpLeosMcastIgmpPriority OBJECT-TYPE Setting this object will set the priority if IGMP packets for this VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.14 | Integer32 (0..7) | read-write | current |
| wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr OBJECT-TYPE The first IP Address of the router IP Address range. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.15 | IpAddress | read-write | current |
| wwpLeosMcastIgmpSnoopRouterRangeEndIpAddr OBJECT-TYPE The last IP Address of the router IP Address range. When range is undefined, all leave/join messages will be forwarded to the router even when the multicast stream does not originate from the router. If the range is defined, leave/join messages will be filtered. The default value for this object should be equal to the value of wwpLeosMcastIgmpSnoopRouterRangeStartIpAddr. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.16 | IpAddress | read-write | current |
| wwpLeosMcastIgmpSnoopActiveLingerTimeout OBJECT-TYPE The object specifies the active linger timeout in seconds. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.17 | Integer32 (0..300) | read-write | current |
| wwpLeosMcastIgmpSnoopServerTopology OBJECT-TYPE The object specifies the server topology. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.18 | INTEGER {centralized(1), distributed(2)} | read-write | current |
| wwpLeosMcastIgmpSnoopRapidRecoveryMode OBJECT-TYPE Specifies whether the rapid recovery mode is set to on or off. If this object is set to ON then device will generate and accept query packets with src IP = 0 else in the OFF state, it would not. | 1.3.6.1.4.1.6141.2.60.7.1.1.4.1.19 | INTEGER {on(1), off(2)} | read-write | current |
| wwpLeosMcastChannelStreamTable OBJECT-TYPE The (conceptual) table listing the configuration parameters for the multicast channel stream. | 1.3.6.1.4.1.6141.2.60.7.1.1.5 | not-accessible | current | |
| wwpLeosMcastChannelStreamEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastChannelStreamTable. | 1.3.6.1.4.1.6141.2.60.7.1.1.5.1 | not-accessible | current | |
| wwpLeosMcastChanelStreamStartGroupAddr OBJECT-TYPE The first IP Address of the multicast IP Address range. | 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.1 | IpAddress | read-only | current |
| wwpLeosMcastChanelStreamEndGroupAddr OBJECT-TYPE The last IP Address of the multicast IP address range. If range does not need to be specified then do not set this value. | 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.2 | IpAddress | read-write | current |
| wwpLeosMcastChannelStreamStatus OBJECT-TYPE This object is used to add/delete multicast groups to the channel stream. To add a multicast group to the channel stream, a user must set this object to 'createAndGo'. Device will not allow to create entry unless 'wwpLeosMcastChanelStreamStartGroupAddr' is specified. If range needs to be specified then set 'wwpLeosMcastChanelStreamEndGroupAddr' with the desired group address. If device cannot create entry for any of the IP addresses within the range then no entry will be created and an error will be returned. | 1.3.6.1.4.1.6141.2.60.7.1.1.5.1.3 | RowStatus | read-create | current |
| wwpLeosMcastFilterConfigTable OBJECT-TYPE The (conceptual) table listing the vlans on which the UPF can be applied. | 1.3.6.1.4.1.6141.2.60.7.1.1.6 | not-accessible | current | |
| wwpLeosMcastFilterConfigEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastFilterConfigTable. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1 | not-accessible | current | |
| wwpLeosMcastFilterUPFActivate OBJECT-TYPE UPF can be enabled on this VLAN by setting this object to 'true'. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.1 | TruthValue | read-write | current |
| wwpLeosMcastUnresolvedAction OBJECT-TYPE Setting this object to 'flood' will cause the device to flood all the unresolved messages to all the ports in the VLAN. Setting this object to 'drop' will cause the device to drop all the unresolved messages. If an IGMP join is received with a matching multicast group address, the multicast stream will forward to the corresponding port. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.2 | INTEGER {flood(1), drop(2)} | read-write | current |
| wwpLeosMcastFilterWKMFLocalActivate OBJECT-TYPE Setting the object to flood will enable flooding of local WKMF on a VLAN. Setting the object to drop will enable dropping of local WKMF on a VLAN. Multicast address belonging to this object is 224.0.0.x. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.3 | INTEGER {flood(1), drop(2)} | read-write | current |
| wwpLeosMcastFilterWKMFInternetActivate OBJECT-TYPE Setting the object to flood will enable flooding of internet WKMF on a VLAN. Setting the object to drop will enable dropping of internet WKMF on a VLAN. Multicast address belonging to this object is 224.0.1.x. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.4 | INTEGER {flood(1), drop(2)} | read-write | current |
| wwpLeosMcastFilterWKMFAdhocActivate OBJECT-TYPE Setting the object to flood will enable flooding of adhoc WKMF on a VLAN. Setting the object to drop will enable dropping of adhoc WKMF on a VLAN. Multicast address belonging to this object is 224.0.2.x to 224.0.255.x. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.5 | INTEGER {flood(1), drop(2)} | read-write | current |
| wwpLeosMcastFilterWKMFStMulticastActivate OBJECT-TYPE Setting the object to flood will enable flooding of st-multicast WKMF on a VLAN. Setting the object to drop will enable dropping of st-multicast WKMF on a VLAN. Multicast address belonging to this object is 224.1.x.x. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.6 | INTEGER {flood(1), drop(2)} | read-write | current |
| wwpLeosMcastFilterWKMFSdpSapActivate OBJECT-TYPE Setting the object to flood will enable flooding of sdp-sap WKMF on a VLAN. Setting the object to drop will enable dropping of sdp-sap WKMF on a VLAN. Multicast address belonging to this object is 224.2.x.x. | 1.3.6.1.4.1.6141.2.60.7.1.1.6.1.7 | INTEGER {flood(1), drop(2)} | read-write | current |
| wwpLeosMcastChannelStreamExPortMemTable OBJECT-TYPE The (conceptual) table listing the excluded port list per VLAN for channel stream. | 1.3.6.1.4.1.6141.2.60.7.1.1.7 | not-accessible | current | |
| wwpLeosMcastChannelStreamExPortMemEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastChannelStreamExPortMemTable. | 1.3.6.1.4.1.6141.2.60.7.1.1.7.1 | not-accessible | current | |
| wwpLeosMcastChannelStreamExPortId OBJECT-TYPE The port num to be excluded from channel stream. | 1.3.6.1.4.1.6141.2.60.7.1.1.7.1.1 | Integer32 (1..65535) | read-only | current |
| wwpLeosMcastChannelStreamExPortMemStatus OBJECT-TYPE Setting this object to createAndGo will add wwpLeosMcastVlanId and wwpLeosMcastChannelStreamExPortId in the excluded port list of channel stream. Setting this to destroy will remove the wwpLeosMcastVlanId, wwpLeosMcastChannelStreamExPortId membership from excluded port list. | 1.3.6.1.4.1.6141.2.60.7.1.1.7.1.2 | RowStatus | read-create | current |
| wwpLeosMcastSnoopState OBJECT-TYPE Setting this object will enable or disable IGMP Snooping globally on SAOS (6.x). LEOS (4.x) does not support setting IGMP snooping at a global level. It should be enabled on a per VLAN bases using the wwpLeosMcastIgmpSnoopEnable MIB object | 1.3.6.1.4.1.6141.2.60.7.1.1.8 | TruthValue | read-write | current |
| wwpLeosMcastGlobalStatsClear OBJECT-TYPE Setting this object to clear will clear the statistics for all the Multicast-Service filter entries. We cannot set the object to none. It is for display purpose only. | 1.3.6.1.4.1.6141.2.60.7.1.1.10 | INTEGER {clear(1), none(2)} | read-write | current |
| wwpLeosMcastFilterStatus OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.1.2 | |||
| wwpLeosMcastGroupTable OBJECT-TYPE The (conceptual) table listing all the multicast groups. | 1.3.6.1.4.1.6141.2.60.7.1.2.1 | not-accessible | current | |
| wwpLeosMcastGroupEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastGroupTable. | 1.3.6.1.4.1.6141.2.60.7.1.2.1.1 | not-accessible | current | |
| wwpLeosMcastGroupAddr OBJECT-TYPE The multicast group IP address. | 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.1 | IpAddress | read-only | current |
| wwpLeosMcastState OBJECT-TYPE The current state of the multicast stream. | 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.2 | INTEGER {active(1), query(2), linger(3)} | read-only | current |
| wwpLeosMcastType OBJECT-TYPE The type of the multicast stream. | 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.3 | INTEGER {static(1), dynamic(2)} | read-only | current |
| wwpLeosMcastSource OBJECT-TYPE The source for this multicast stream. | 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.4 | INTEGER {router(1), server(2)} | read-only | current |
| wwpLeosMcastMemberCount OBJECT-TYPE The number of ports that joined the group. | 1.3.6.1.4.1.6141.2.60.7.1.2.1.1.5 | Counter32 | read-only | current |
| wwpLeosMcastGroupMemberTable OBJECT-TYPE The (conceptual) table listing all the port members of the multicast groups. | 1.3.6.1.4.1.6141.2.60.7.1.2.2 | not-accessible | current | |
| wwpLeosMcastGroupMemberEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastGroupMemberTable. | 1.3.6.1.4.1.6141.2.60.7.1.2.2.1 | not-accessible | current | |
| wwpLeosMcastPortId OBJECT-TYPE The router port from which the IGMP query messages are received, and joins/leaves messages are sent. | 1.3.6.1.4.1.6141.2.60.7.1.2.2.1.1 | Integer32 (1..65535) | read-only | current |
| wwpLeosMcastPortTagId OBJECT-TYPE The Virtual Lan Tag Id used by the port on this Virtual Lan. If the switch is being used as a traditional Layer 2 device, then the value of this object should be same as wwpLeosMcastVlanId. | 1.3.6.1.4.1.6141.2.60.7.1.2.2.1.2 | Integer32 (1..4094) | read-only | current |
| wwpLeosMcastFilterStats OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.1.3 | |||
| wwpLeosMcastFilterStatsTable OBJECT-TYPE The (conceptual) table listing the multicast statistics. | 1.3.6.1.4.1.6141.2.60.7.1.3.1 | not-accessible | current | |
| wwpLeosMcastFilterStatsEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosMcastFilterServerTable. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1 | not-accessible | current | |
| wwpLeosMcastStaticGrpCount OBJECT-TYPE The total number of static multicast groups. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.1 | Integer32 (0..65535) | read-only | current |
| wwpLeosMcastDynamicGrpCount OBJECT-TYPE The total number of dynamic mcast groups. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.2 | Integer32 (0..65535) | read-only | current |
| wwpLeosMcastJoinMessages OBJECT-TYPE The total number of join messages received. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.3 | Counter32 | read-only | current |
| wwpLeosMcastLeaveMessages OBJECT-TYPE The total number of leave messages received. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.4 | Counter32 | read-only | current |
| wwpLeosMcastQueryMessages OBJECT-TYPE The total number of queries received. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.5 | Counter32 | read-only | current |
| wwpLeosMcastQueryDiscards OBJECT-TYPE The total number of queries discarded. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.6 | Counter32 | read-only | current |
| wwpLeosMcastQueryTimeouts OBJECT-TYPE The total number of timeouts waiting for the router to send query. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.7 | Counter32 | read-only | current |
| wwpLeosMcastUnknownPktType OBJECT-TYPE The total number of unknown (unknown type ) IGMP packets received. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.8 | Counter32 | read-only | current |
| wwpLeosMcastRouterDiscards OBJECT-TYPE The total number of messages discarded by the router. This happens when join comes in from a router port. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.9 | Counter32 | read-only | current |
| wwpLeosMcastHostDiscards OBJECT-TYPE The total number of messages discarded by the host. This happens when a join/leave comes in a port, but no router port is established. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.10 | Counter32 | read-only | current |
| wwpLeosMcastBadChecksum OBJECT-TYPE The total number of packets received with bad IP checksum. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.11 | Counter32 | read-only | current |
| wwpLeosMcastL2L3Mismatch OBJECT-TYPE The total number of IGMP Layer2 / Layer 3 mismatch packets received. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.12 | Counter32 | read-only | current |
| wwpLeosMcastTotalMembers OBJECT-TYPE The total number of group members for all groups in the given VLAN. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.13 | Counter32 | read-only | current |
| wwpLeosMcastLingerCount OBJECT-TYPE The total number of groups in linger state. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.14 | Counter32 | read-only | current |
| wwpLeosMcastRouterSrcMacAddr OBJECT-TYPE Specifies the router's MAC address. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.15 | MacAddress | read-only | current |
| wwpLeosMcastRouterSrcIpAddr OBJECT-TYPE Specifies the router's IP address. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.16 | IpAddress | read-only | current |
| wwpLeosMcastRouterPortId OBJECT-TYPE Specifies the port from where router queries are coming. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.17 | Integer32 (0..65535) | read-only | current |
| wwpLeosMcastReportSendPortId OBJECT-TYPE The new value is the port number of the port where IGMP reports will be sent. Not always the same as the router port. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.18 | Integer32 (0..65535) | read-only | current |
| wwpLeosMcastStatsClear OBJECT-TYPE Setting this object to clear will clear the statistics for only the associated VlanId. We cannot set this object to none, it is for display purpose only. | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.19 | INTEGER {clear(1), none(2)} | read-write | current |
| wwpLeosMcastStatsQuerySrcIpZeroDiscard OBJECT-TYPE Specifies the number of Queries discarded with Zero source IP in them | 1.3.6.1.4.1.6141.2.60.7.1.3.1.1.20 | Counter32 | read-only | current |
| wwpLeosMcastFilterMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.2 | |||
| wwpLeosMcastFilterMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.2.0 | |||
| wwpLeosMcastFilterMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.3 | |||
| wwpLeosMcastFilterMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.3.1 | |||
| wwpLeosMcastFilterMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.7.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| wwpLeosMcastAddrOverlapNotification NOTIFICATION-TYPE A wwpLeosMcastAddrOverlapNotification is sent whenever several multicast IP addresses overlap (matches the same L2 address). | 1.3.6.1.4.1.6141.2.60.7.2.0.1 | current |