WWP-LEOS-IP-INTERFACE-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.24
- Last updated
- 2008-05-14 00:00
- Organization
- Ciena, Inc
- Revisions
- 2008-05-14 00:00, 2003-05-02 00:00, 2001-04-03 17:00
- Namespace
- ciena
- Source file
WWP-LEOS-IP-INTERFACE-MIB- Digest
sha256:6cf25c52f4cb07b7100ad58d623a416fb34fbfe61cd1bfff32ad640b82a91d9c
Description
Added the operational gateway and a trap for gateway changes
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-IP-INTERFACE-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| VlanId TEXTUAL-CONVENTION A 12-bit VLAN ID used in the VLAN Tag header. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosIpInterfaceMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.1 | |||
| wwpLeosIpInterface OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.1.1 | |||
| wwpLeosIpInterfaceTable OBJECT-TYPE Table of IP addresses and associated subnet mask. | 1.3.6.1.4.1.6141.2.60.24.1.1.1 | not-accessible | current | |
| wwpLeosIpInterfaceEntry OBJECT-TYPE Interface IP and subnet mask entry. These interfaces are used to cause the switch CPU to become involved with the IP traffic. By default, a minimum of two interfaces must always exist, one for the local management interface, one for the remote management interface, and one or more for voice over IP. | 1.3.6.1.4.1.6141.2.60.24.1.1.1.1 | not-accessible | current | |
| wwpLeosIpInterfaceIndex OBJECT-TYPE Unique index into the table. | 1.3.6.1.4.1.6141.2.60.24.1.1.1.1.1 | Integer32 (1..4096) | read-only | current |
| wwpLeosIpInterfaceName OBJECT-TYPE The friendly name for the IP interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.1.1.2 | DisplayString (SIZE(0..32)) | read-only | current |
| wwpLeosIpInterfaceIpAddr OBJECT-TYPE IP address associated with this interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.1.1.3 | IpAddress | read-write | current |
| wwpLeosIpInterfaceSubnet OBJECT-TYPE The subnet mask associated with this ip address/interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.1.1.4 | IpAddress | read-write | current |
| wwpLeosIpInterfaceIfIndexXref OBJECT-TYPE Cross reference to MIB-2 Interfaces ifIndex. | 1.3.6.1.4.1.6141.2.60.24.1.1.1.1.5 | INTEGER (1..4096) | read-only | current |
| wwpLeosIpExtInterfaceTable OBJECT-TYPE A table that contains Interface Specific information maintained by each interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.2 | not-accessible | current | |
| wwpLeosIpExtInterfaceEntry OBJECT-TYPE A list of interfaces additional configuration parameters maintained by each interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.2.1 | not-accessible | current | |
| wwpLeosIpInterfaceEnable OBJECT-TYPE The status of each interface. A value of true(1) indicates that this interface is enabled and a value of false(2) indicates that this interface is disabled. The device shouldn't allow the Management Station to disable all the interfaces available on the box. | 1.3.6.1.4.1.6141.2.60.24.1.1.2.1.1 | TruthValue | read-write | current |
| wwpLeosIpInterfaceVlanId OBJECT-TYPE The vlanId associated with this IP interface. The vlan indicated by wwpLeosIpInterfaceVlanId should exist in the Vlan Table. If an interface has no VLAN associated, then any read on this object should return 'noSuchInstance'. | 1.3.6.1.4.1.6141.2.60.24.1.1.2.1.2 | VlanId | read-write | current |
| wwpLeosIpInterfaceMgmtPktPriority OBJECT-TYPE The 802.1p Priority value for the management traffic on this interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.2.1.3 | INTEGER (0..7) | read-write | current |
| wwpLeosIpInterfaceAddrNotifEnabled OBJECT-TYPE This variable indicates whether the system generates the wwpLeosIpInterfaceAddrChgNotification. A false value prevents this notifications from being generated by this system. | 1.3.6.1.4.1.6141.2.60.24.1.1.3 | TruthValue | read-write | current |
| wwpLeosIpDataInterfaceTable OBJECT-TYPE Data Interface IP and subnet mask entry. To create a loopback interface in this table, following attributes must be specified. wwpLeosIpDataInterfaceIndex wwpLeosIpDataInterfaceName wwpLeosIpDataInterfaceIpAddr wwpLeosIpDataInterfaceType must be set to 'loopback'. wwpLeosIpDataInterfaceVlanId defaults to 1 and cannot be set or changed. No other MIB object should be set otherwise error will be returned. To create a regular Data interface the following attributes must be specified. wwpLeosIpDataInterfaceIndex wwpLeosIpDataInterfaceName wwpLeosIpDataInterfaceIpAddr wwpLeosIpDataInterfaceMask wwpLeosIpDataInterfaceVlanId must be specified when the interface is created. It cannot be changed after creation. wwpLeosIpDataRowStatus must be set to 'createAndGo'. | 1.3.6.1.4.1.6141.2.60.24.1.1.4 | not-accessible | current | |
| wwpLeosIpDataInterfaceEntry OBJECT-TYPE Each entry represents a Data interface configuration parameter. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1 | not-accessible | current | |
| wwpLeosIpDataInterfaceIndex OBJECT-TYPE Unique index into the table. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.1 | INTEGER (1..4096) | read-only | current |
| wwpLeosIpDataInterfaceName OBJECT-TYPE The name for this Data IP interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.2 | DisplayString (SIZE(0..15)) | read-create | current |
| wwpLeosIpDataInterfaceIpAddr OBJECT-TYPE IP address associated with this interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.3 | IpAddress | read-create | current |
| wwpLeosIpDataInterfaceMask OBJECT-TYPE The subnet mask associated with this ip address/interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.4 | IpAddress | read-create | current |
| wwpLeosIpDataInterfaceVlanId OBJECT-TYPE The vlanId associated with this Data IP interface. This vlan must already exist on the device. The vlanId must be specified when the interface is created. It cannot be set after creation. The vlanId cannot be specified and defaults to 1 for a loopback interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.5 | VlanId | read-create | current |
| wwpLeosIpDataInterfaceType OBJECT-TYPE The type of Data IP interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.6 | INTEGER {broadcast(1), pointToPoint(2), loopBack(3)} | read-create | current |
| wwpLeosIpDataInterfaceIfIndex OBJECT-TYPE The unique interface index assigned by INET. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.7 | Integer32 | read-only | current |
| wwpLeosIpDataInterfaceMac OBJECT-TYPE MAC address assigned by the device to this Data interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.8 | MacAddress | read-only | current |
| wwpLeosIpDataInterfaceIfMtu OBJECT-TYPE The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.9 | Integer32 | read-create | current |
| wwpLeosIpDataInterfaceRowStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'. | 1.3.6.1.4.1.6141.2.60.24.1.1.4.1.10 | RowStatus | read-create | current |
| wwpLeosIpInterfaceOperationalGateway OBJECT-TYPE Operational gateway IP address. | 1.3.6.1.4.1.6141.2.60.24.1.1.5 | IpAddress | read-only | current |
| wwpLeosIpAclGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.1.2 | |||
| wwpLeosIpAclState OBJECT-TYPE This object allows to globally configure IP ACL state. | 1.3.6.1.4.1.6141.2.60.24.1.2.1 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| wwpLeosIpAclCacheHit OBJECT-TYPE Count of the number of lookups satisfied by a cache hit. | 1.3.6.1.4.1.6141.2.60.24.1.2.2 | Counter32 | read-only | current |
| wwpLeosIpAclNoHit OBJECT-TYPE Count of the number of lookups which failed because the source ip address did not match a table entry. | 1.3.6.1.4.1.6141.2.60.24.1.2.3 | Counter32 | read-only | current |
| wwpLeosIpAclBadPort OBJECT-TYPE Count of the number of lookups which failed because the ingress port was disallowed by a table entry. | 1.3.6.1.4.1.6141.2.60.24.1.2.4 | Counter32 | read-only | current |
| wwpLeosIpAclClearStats OBJECT-TYPE Set this object to 'destroy' to clear the global and table entry statistics counters. | 1.3.6.1.4.1.6141.2.60.24.1.2.5 | RowStatus | read-write | current |
| wwpLeosIpAclBadDscp OBJECT-TYPE Count of the number of lookups which failed because the ingress DSCP value was disallowed by a table entry. | 1.3.6.1.4.1.6141.2.60.24.1.2.6 | Counter32 | read-only | current |
| wwpLeosIpAclOperState OBJECT-TYPE The current operational state of the IP ACL system. | 1.3.6.1.4.1.6141.2.60.24.1.2.7 | INTEGER {disabled(1), enabled(2)} | read-only | current |
| wwpLeosIpAclInUseEntries OBJECT-TYPE Count of the number of IP ACL rules that are currently configured. | 1.3.6.1.4.1.6141.2.60.24.1.2.8 | Counter32 | read-only | current |
| wwpLeosIpAclMaxEntries OBJECT-TYPE Count of the max number of IP ACL rules that can be configured. | 1.3.6.1.4.1.6141.2.60.24.1.2.9 | Counter32 | read-only | current |
| wwpLeosIpAclRules OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.1.3 | |||
| wwpLeosIpAclTable OBJECT-TYPE The (conceptual) table listing the display parameters for the IP ACL table. | 1.3.6.1.4.1.6141.2.60.24.1.3.1 | not-accessible | current | |
| wwpLeosIpAclEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosIpAclTable. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1 | not-accessible | current | |
| wwpLeosIpAclEntryIpAddr OBJECT-TYPE This object is the IP network which will be authorized. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.1 | IpAddress | read-create | current |
| wwpLeosIpAclEntryIpMask OBJECT-TYPE This object is the netmask for the IP network which will be authorized. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.2 | IpAddress | read-create | current |
| wwpLeosIpAclEntryPortMask OBJECT-TYPE This object is used to specify the physical ports which frames will be allowed to ingress from. The mask is big endian and each bit, numbered from 0 to 27, represents a physical port numbered from 1 to 28. A value of 0xFFFFFFFF may be used to specify all ports. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.3 | Unsigned32 | read-create | deprecated |
| wwpLeosIpAclEntryHits OBJECT-TYPE Count of the number of lookups which matched the table entry. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.4 | Counter32 | read-only | current |
| wwpLeosIpAclEntryBadPort OBJECT-TYPE Count of the number of lookups which failed because the ingress port was disallowed by the table entry. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.5 | Counter32 | read-only | current |
| wwpLeosIpAclEntryStatus OBJECT-TYPE Set this object to 'CreateAndGo' to create a new table entry, set it to 'destroy' to remove an existing entry. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.6 | RowStatus | read-create | current |
| wwpLeosIpAclEntryDscpMask OBJECT-TYPE This object is used to specify the DSCP values for which IP packets will be allowed to ingress. The mask is big endian and each bit, numbered from 0 to 63, represents a DSCP value numbered from 0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.7 | OCTET STRING (SIZE(8)) | read-create | current |
| wwpLeosIpAclEntryBadDscp OBJECT-TYPE Count of the number of lookups which failed because the ingress DSCP value was disallowed by the table entry. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.8 | Counter32 | read-only | current |
| wwpLeosIpAclEntryPortBitMask OBJECT-TYPE This object is used to specify the physical ports which frames will be allowed to ingress from. The mask is big endian and each bit, numbered from 0 to 63, represents a physical port numbered from 1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all ports. | 1.3.6.1.4.1.6141.2.60.24.1.3.1.1.9 | OCTET STRING (SIZE(8)) | read-create | current |
| wwpLeosIpInterfaceMIBNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.2 | |||
| wwpLeosIpInterfaceMIBNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.2.0 | |||
| wwpLeosIpInterfaceMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.3 | |||
| wwpLeosIpInterfaceMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.3.1 | |||
| wwpLeosIpInterfaceMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.24.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| wwpLeosIpInterfaceAddrChgNotification NOTIFICATION-TYPE A wwpLeosIpInterfaceAddrChgNotification is sent whenever the ip address of an interface changes. | 1.3.6.1.4.1.6141.2.60.24.2.0.1 | current |
| wwpLeosIpInterfaceOperationalGatewayChgNotification NOTIFICATION-TYPE A wwpLeosIpOperationalGatewayChgNotification notification will be sent out whenever the operational gateway is changed. | 1.3.6.1.4.1.6141.2.60.24.2.0.2 | current |