WWP-LEOS-FLOW-MIB
- Registered at
- 1.3.6.1.4.1.6141.2.60.6
- Last updated
- 2012-03-29 00:00
- Organization
- Ciena, Inc
- Revisions
- 2012-03-29 00:00, 2011-02-02 00:00, 2008-06-16 17:00, 2001-04-03 17:00
- Namespace
- ciena
- Source file
WWP-LEOS-FLOW-MIB- Digest
sha256:bc54880fb69ec969c6598827dd1fa3567a29dd1452a627d5054b6a69e4deb0c1
Description
MIB module for the WWP FLOW specific information. This MIB module is common between 4.x and 6.x platforms.
Contact
Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com
Imports
| From | Symbols |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
| WWP-SMI | wwpModulesLeos |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WWP-LEOS-FLOW-MIB WWP-SMI
Textual conventions
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| PriorityMapping TEXTUAL-CONVENTION Represents the priority mapping. Octets in this object represents the remarked priority values for priority 0-7 respectively. | current |
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wwpLeosFlowMIBObjects OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.1 | |||
| wwpLeosFlow OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.1.1 | |||
| wwpLeosFlowAgeTime OBJECT-TYPE Specifies the age time after which mac entries will be flushed out. | 1.3.6.1.4.1.6141.2.60.6.1.1.1 | INTEGER (10..1000000) | read-write | current |
| wwpLeosFlowAgeTimeState OBJECT-TYPE Specifies if age time is enabled or disabled. | 1.3.6.1.4.1.6141.2.60.6.1.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowServiceLevelTable OBJECT-TYPE A table of flow service level entries. Following criteria must be met while creating entry in the table. - All indexes must be specified - wwpLeosFlowServiceLevelCirBW and wwpLeosFlowServiceLevelPirBW must be set. - wwpLeosFlowServiceLevelStatus must be set to create and go. | 1.3.6.1.4.1.6141.2.60.6.1.1.3 | not-accessible | current | |
| wwpLeosFlowServiceLevelEntry OBJECT-TYPE The flow service level entry in the Table. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1 | not-accessible | current | |
| wwpLeosFlowServiceLevelDirection OBJECT-TYPE Service level Id direction used as index in the service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.1 | INTEGER {ingress(1), egress(2)} | read-only | current |
| wwpLeosFlowServiceLevelPort OBJECT-TYPE Port id used as index in the service level entry. If it is intended to not specify the port id in the index, this value should be set to 0. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.2 | INTEGER (0..65535) | read-only | current |
| wwpLeosFlowServiceLevelId OBJECT-TYPE Service level Id used as index in the service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.3 | INTEGER (1..65535) | read-only | current |
| wwpLeosFlowServiceLevelName OBJECT-TYPE The flow service level name associated with this service level. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.4 | DisplayString | read-create | current |
| wwpLeosFlowServiceLevelPriority OBJECT-TYPE The internal traffic-queue priority. This may also be used as a weighting factor. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.5 | INTEGER (0..7) | read-create | current |
| wwpLeosFlowServiceLevelQueueSize OBJECT-TYPE The size of the traffic queue provisioned for this service level entry. This may also be referred to as Latency Tolerance. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.6 | INTEGER {size0KB(0), small(1), medium(2), large(3), jumbo(4), x5(5), x6(6), x7(7), x8(8), size16KB(9), size32KB(10), size64KB(11), size128KB(12), size256KB(13), size512KB(14), size1MB(15), size2MB(16), size4MB(17)} | read-create | current |
| wwpLeosFlowServiceLevelDropEligibility OBJECT-TYPE This item is used to indicate whether or not frames should be dropped or queued when frame buffer resources become scarce. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.7 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| wwpLeosFlowServiceLevelShareEligibility OBJECT-TYPE This item is used to indicate whether or not a service level may be shared among entries in the flow service-mapping table. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.8 | INTEGER {enabled(1), disabled(2)} | read-create | current |
| wwpLeosFlowServiceLevelCirBW OBJECT-TYPE The committed information rate (bandwidth) in Kbps associated with this service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.9 | Integer32 (0..2147483647) | read-create | current |
| wwpLeosFlowServiceLevelPirBW OBJECT-TYPE The peak information rate (maximum bandwidth) in Kbps associated with this service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.10 | Integer32 (0..2147483647) | read-create | current |
| wwpLeosFlowServiceStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. In particular, a newly created row cannot be made active until one of the following instances have been set: - wwpLeosFlowServiceLevelCirBW - wwpLeosFlowServiceLevelPirBW. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.11 | RowStatus | read-create | current |
| wwpLeosFlowServiceRedCurveId OBJECT-TYPE This object is used to specifies the red curve index to be used for the given service level. If this OID is not specified, the system will use the default value of this object which is dependent on the queue size wwpLeosFlowServiceLevelQueueSize | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.12 | Unsigned32 (5..64) | read-create | current |
| wwpLeosFlowServiceLevelQueueSizeYellow OBJECT-TYPE The size of the yellow traffic queue provisioned for this service level entry. Also known as the discard preferred queue size. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.13 | INTEGER {size16KB(1), size32KB(2), size64KB(3), size128KB(4)} | read-create | current |
| wwpLeosFlowServiceLevelQueueSizeRed OBJECT-TYPE The size of the red traffic queue provisioned for this service level entry. Also known as the discard wanted queue size | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.14 | INTEGER {size16KB(1), size32KB(2), size64KB(3), size128KB(4)} | read-create | current |
| wwpLeosFlowServiceLevelFlowGroup OBJECT-TYPE Service level Id direction used as index in the service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.3.1.15 | INTEGER {enable(1), disable(2)} | read-create | current |
| wwpLeosFlowServiceMappingTable OBJECT-TYPE A service mapping entry in the service-mapping table. To create entry in this table following criteria must be met and SNMP multiple set operation must be used to create entries. - wwpLeosFlowServiceMapDstSlidId must be set to valid SLID and this slid must exist on the device. Use wwpLeosFlowServiceLevelTable to create slid. - All indexes must be specified with exception to following objects. - wwpLeosFlowServiceMappingVid must be set to 0 if don't care else set it to some valid value. VID must exist on the device. - wwpLeosFlowServiceMappingSrcPort must be set to 0 if don't care else set it to some valid value. - wwpLeosFlowServiceMappingSrcTag must be set to 0 if don't care else set it to some valid value. - wwpLeosFlowServiceMappingDstPort must be set to 0 if don't care else set it to some valid value. - wwpLeosFlowServiceMappingDstTag must be set to 0 if don't care else set it to some valid value. - wwpLeosFlowServiceMappingProtocolType must be set to 1 if don't care else set it to some valid value. - wwpLeosFlowServiceMappingProtocolPortNum must be set to 0 if don't care else set it to some valid value. - wwpLeosFlowServiceMapSrcPri must be set to 255 if don't care else set it to some valid value. | 1.3.6.1.4.1.6141.2.60.6.1.1.4 | not-accessible | deprecated | |
| wwpLeosFlowServiceMappingEntry OBJECT-TYPE A service mapping entry in the wwpLeosFlowServiceMappingTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1 | not-accessible | deprecated | |
| wwpLeosFlowServiceMapVid OBJECT-TYPE The VLAN id associated with this service mapping entry. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.1 | INTEGER (0..24576) | read-only | deprecated |
| wwpLeosFlowServiceMapSrcPort OBJECT-TYPE The source port id for the instance. This represents the ingress location of a flow. This port id should refer to the dot1dBasePort in the Dot1dBasePortEntry. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.2 | INTEGER (0..65535) | read-only | deprecated |
| wwpLeosFlowServiceMapSrcTag OBJECT-TYPE The source VLAN tag associated with this service mapping entry. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.3 | INTEGER (0..4095) | read-only | deprecated |
| wwpLeosFlowServiceMapDstPort OBJECT-TYPE The destination port id for the instance. This represents the egress location for a flow. This port id should refer to the dot1dBasePort in the Dot1dBasePortEntry. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.4 | INTEGER (0..65535) | read-only | deprecated |
| wwpLeosFlowServiceMapDstTag OBJECT-TYPE The destination VLAN tag associated with this service mapping entry. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.5 | INTEGER (0..4095) | read-only | deprecated |
| wwpLeosFlowServiceMapSrcPri OBJECT-TYPE The incoming packet vlan tag priority on the wwpLeosFlowServiceMapSrcPort. The 802.1p packet priority valid values are only from 0 to 7. If this object is set to 255 (or signed 8-bit integer -1), then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.6 | INTEGER (0..255) | read-only | deprecated |
| wwpLeosFlowServiceMapProtocolType OBJECT-TYPE The Layer 4 protocol type used as index in the table. This will correspond to the TCP or UDP protocol. If this object is set to 1, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.7 | INTEGER {none(1), tcp(2), udp(3)} | read-only | deprecated |
| wwpLeosFlowServiceMapProtocolPortNum OBJECT-TYPE The Layer 4 protocol port number used as index in the table. This will correspond to a TCP or UDP port number. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.8 | INTEGER (0..65535) | read-only | deprecated |
| wwpLeosFlowServiceMapDstSlidId OBJECT-TYPE The service level id to apply to the flow at egress. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.9 | INTEGER (0..4095) | read-write | deprecated |
| wwpLeosFlowServiceMapSrcSlidId OBJECT-TYPE The service level id to apply to the flow at ingress. If this object is set to 0, then this object should be ignored while creating the service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.10 | INTEGER (0..4095) | read-write | deprecated |
| wwpLeosFlowServiceMapPriRemarkStatus OBJECT-TYPE Setting this object to 'true' will enable remarking of the VLAN tag priority for frames that match the classification defined by this service-mapping entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.11 | TruthValue | read-write | deprecated |
| wwpLeosFlowServiceMapRemarkPri OBJECT-TYPE The remark priority value. For frames that match the classification defined by this service-mapping entry, the VLAN tag priority will be remarked with this value. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.12 | INTEGER (0..4095) | read-write | deprecated |
| wwpLeosFlowServiceMapStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. | 1.3.6.1.4.1.6141.2.60.6.1.1.4.1.13 | RowStatus | read-create | deprecated |
| wwpLeosFlowServiceACTable OBJECT-TYPE A Table of FLOW Service Access Control Entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.5 | not-accessible | current | |
| wwpLeosFlowServiceACEntry OBJECT-TYPE A service Access entry in the wwpLeosFlowServiceACTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1 | not-accessible | current | |
| wwpLeosFlowServiceACPortId OBJECT-TYPE Port id for the instance. This port id should refer to the dot1dBasePort in the Dot1dBasePortEntry. Used as index in service access table. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.1 | INTEGER (1..65535) | read-only | current |
| wwpLeosFlowServiceACVid OBJECT-TYPE The VLAN id associated with this access control entry. Used as index in service access table. If the platform supports only port-based service access control, this value should be set to 0. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.2 | INTEGER (0..24576) | read-only | current |
| wwpLeosFlowServiceACMaxDynamicMacCount OBJECT-TYPE The maximum number of dynamic MAC Addresses that will be learned and authorized by this access control entry. This value should default to 24. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.3 | Integer32 (0..2147483647) | read-create | current |
| wwpLeosFlowServiceACDynamicNonFilteredMacCount OBJECT-TYPE The current number of non-filtered or authorized dynamic MAC addresses recorded in this access control entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.4 | Integer32 (0..2147483647) | read-only | current |
| wwpLeosFlowServiceACDynamicFilteredMacCount OBJECT-TYPE The current number of filtered or non-authorized dynamic MAC addresses recorded in this access control entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.5 | Integer32 (0..2147483647) | read-only | current |
| wwpLeosFlowServiceACStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.7 | RowStatus | read-create | current |
| wwpLeosFlowServiceACForwardLearning OBJECT-TYPE To specify whether or not unlearned frames are forwarded or dropped. | 1.3.6.1.4.1.6141.2.60.6.1.1.5.1.50 | INTEGER {on(1), off(2)} | read-create | current |
| wwpLeosFlowStaticMacTable OBJECT-TYPE The (conceptual) table to add the static mac addresses. | 1.3.6.1.4.1.6141.2.60.6.1.1.6 | not-accessible | current | |
| wwpLeosFlowStaticMacEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosFlowStaticMacTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.6.1 | not-accessible | current | |
| wwpLeosFlowSMVid OBJECT-TYPE The service network id associated with this entry. Used as index in static MAC table. | 1.3.6.1.4.1.6141.2.60.6.1.1.6.1.1 | INTEGER (1..24576) | read-only | current |
| wwpLeosFlowSMMacAddr OBJECT-TYPE A unicast MAC address to be statically configured. Used as index in static MAC table. | 1.3.6.1.4.1.6141.2.60.6.1.1.6.1.2 | MacAddress | read-only | current |
| wwpLeosFlowSMPortId OBJECT-TYPE Port id for the static MAC instance. This port id should refer to the dot1dBasePort in the Dot1dBasePortEntry. | 1.3.6.1.4.1.6141.2.60.6.1.1.6.1.3 | INTEGER (1..65535) | read-create | current |
| wwpLeosFlowSMTag OBJECT-TYPE The VLAN tag for this static MAC instance. | 1.3.6.1.4.1.6141.2.60.6.1.1.6.1.4 | INTEGER (1..4095) | read-create | current |
| wwpLeosFlowSMStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. In particular, a newly created row cannot be made active until the corresponding instances of wwpLeosFlowSMPortId and wwpLeosFlowSMTag have been set. The following objects may not be modified while the value of this object is active(1): - wwpLeosFlowSMPortId - wwpLeosFlowSMTag | 1.3.6.1.4.1.6141.2.60.6.1.1.6.1.5 | RowStatus | read-create | current |
| wwpLeosFlowLearnTable OBJECT-TYPE A Table of flow learn entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.7 | not-accessible | current | |
| wwpLeosFlowLearnEntry OBJECT-TYPE A flow learn entry in the wwpLeosFlowLearnTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1 | not-accessible | current | |
| wwpLeosFlowLearnVid OBJECT-TYPE The VLAN id associated with this flow-learn entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.1 | INTEGER (1..24576) | read-only | current |
| wwpLeosFlowLearnAddr OBJECT-TYPE The address associated with this flow learn entry. Address can be layer 2 mac address or layer 3 ip address. If address is layer 3 ip address then first two bytes will be 0. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.2 | MacAddress | read-only | current |
| wwpLeosFlowLearnSrcPort OBJECT-TYPE Source port Id for the instance. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.3 | INTEGER (1..65535) | read-only | current |
| wwpLeosFlowLearnSrcTag OBJECT-TYPE The source VLAN tag associated with this flow-learn entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.4 | INTEGER (1..4095) | read-only | current |
| wwpLeosFlowLearnSrcPri OBJECT-TYPE The source Layer 2 priority associated with this flow-learn entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.5 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowLearnAddrType OBJECT-TYPE The address type associated with this flow-learn entry. Address can be layer 2 type or layer 3 type. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.6 | INTEGER {layer2(1), layer3(2)} | read-only | current |
| wwpLeosFlowLearnDstPort OBJECT-TYPE Destination port id associated with this flow-learn entry. This port id should refer to the dot1dBasePort in the Dot1dBasePortEntry. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.7 | INTEGER (1..65535) | read-only | current |
| wwpLeosFlowLearnDstTag OBJECT-TYPE The destination VLAN tag associated with this flow-learn entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.8 | INTEGER (1..4095) | read-only | current |
| wwpLeosFlowLearnType OBJECT-TYPE The flow-learn entry type. This indicates whether or not the device was learned dynamically or entered as a static MAC. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.9 | INTEGER {dynamic(1), static(2)} | read-only | current |
| wwpLeosFlowLearnIsFiltered OBJECT-TYPE This value indicates whether or not the flow-learn entry is filtered. A value of 'true' indicates the flow-learn entry is filtered. | 1.3.6.1.4.1.6141.2.60.6.1.1.7.1.10 | TruthValue | read-only | current |
| wwpLeosFlowServiceStatsTable OBJECT-TYPE A Table of flow service statistics entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.8 | not-accessible | deprecated | |
| wwpLeosFlowServiceStatsEntry OBJECT-TYPE A flow service statistics entry in the wwpLeosFlowServiceStatsTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.8.1 | not-accessible | deprecated | |
| wwpLeosFlowServiceStatsRxHi OBJECT-TYPE The number of bytes received for this flow service entry. This counter represents the upper 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.8.1.1 | Counter32 | read-only | deprecated |
| wwpLeosFlowServiceStatsRxLo OBJECT-TYPE The number of bytes received for this flow service entry. This counter represents the lower 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.8.1.2 | Counter32 | read-only | deprecated |
| wwpLeosFlowServiceStatsTxHi OBJECT-TYPE The number of bytes transmitted for this flow service entry. This counter represents the upper 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.8.1.3 | Counter32 | read-only | deprecated |
| wwpLeosFlowServiceStatsTxLo OBJECT-TYPE The number of bytes transmitted for this flow service entry. This counter represents the lower 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.8.1.4 | Counter32 | read-only | deprecated |
| wwpLeosFlowServiceStatsType OBJECT-TYPE Specifies the type of statistics for given entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.8.1.5 | INTEGER {forward(1), drop(2)} | read-write | deprecated |
| wwpLeosFlowMacFindTable OBJECT-TYPE A flow MAC-find table. MAC address must be specified to walk through the MIB. | 1.3.6.1.4.1.6141.2.60.6.1.1.9 | not-accessible | current | |
| wwpLeosFlowMacFindEntry OBJECT-TYPE A flow service MAC statistics table. | 1.3.6.1.4.1.6141.2.60.6.1.1.9.1 | not-accessible | current | |
| wwpLeosFlowMacFindMacAddr OBJECT-TYPE This variable defines the mac address used as index in the MAC-find table. | 1.3.6.1.4.1.6141.2.60.6.1.1.9.1.1 | MacAddress | read-only | current |
| wwpLeosFlowMacFindVlanId OBJECT-TYPE The VLAN ID on which this MAC address is learned. | 1.3.6.1.4.1.6141.2.60.6.1.1.9.1.2 | INTEGER (1..24576) | read-only | current |
| wwpLeosFlowMacFindPort OBJECT-TYPE This specifies the port id on which this MAC address is learned. | 1.3.6.1.4.1.6141.2.60.6.1.1.9.1.3 | INTEGER (1..65535) | read-only | current |
| wwpLeosFlowMacFindVlanTag OBJECT-TYPE This specifies the VLAN tag on which this MAC address is learned. | 1.3.6.1.4.1.6141.2.60.6.1.1.9.1.4 | INTEGER (1..24576) | read-only | current |
| wwpLeosFlowPriRemapTable OBJECT-TYPE The (conceptual) table to add the static mac addresses. | 1.3.6.1.4.1.6141.2.60.6.1.1.10 | not-accessible | current | |
| wwpLeosFlowPriRemapEntry OBJECT-TYPE An entry (conceptual row) in the wwpLeosFlowStaticMacTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.10.1 | not-accessible | current | |
| wwpLeosFlowUserPri OBJECT-TYPE Specifies the user priority. Also used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.10.1.1 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowRemappedPri OBJECT-TYPE Specifies the remapped priority for given 'wwpLeosFlowUserPri'. | 1.3.6.1.4.1.6141.2.60.6.1.1.10.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowSMappingTable OBJECT-TYPE A service mapping entry in the service-mapping table. To create entry in this table following criteria must be met. - The indexes to the service mapping entry consist of type-value pairs. - There are four(4) sections to the entry. -- NETWORK (type / value) -- SOURCE (type / value) -- DESTINATION (type / value) -- CLASS OF SERVICE (type / value) - All indexes must be specified with the appropriate enumerated - type. If the TYPE is set to 'none', the corresponding VALUE - MUST be set to zero(0). - - The service-mapping entry is very generic. As such, acceptable - combinations of types and values will be scrutinized by the - running platform. | 1.3.6.1.4.1.6141.2.60.6.1.1.13 | not-accessible | current | |
| wwpLeosFlowSMappingEntry OBJECT-TYPE A service mapping entry in the wwpLeosFlowSMappingTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1 | not-accessible | current | |
| wwpLeosFlowSMappingNetType OBJECT-TYPE This object specifies the NETWORK object TYPE for the entry. - - If set to 'none', the corresponding value in - wwpLeosFlowSMappingNetValue MUST be zero(0). - - If set to vlan, a valid vlan-id must be specified. - If set to vsi, a valid ethernet virtual-switch-instance id must be specified. - If set to vsi_mpls, a valid mpls virtual-switch-instance id must be specified - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1 | INTEGER {none(1), vlan(2), vsi(3), vsiMpls(4)} | read-only | current |
| wwpLeosFlowSMappingNetValue OBJECT-TYPE This object specifies the NETWORK object ID for the entry. - - This item must be set according to the value set - in wwpLeosFlowSMappingNetType. If wwpLeosFlowSMappingNetType - equals: - none(1): MUST be set to zero(0). - vlan(2): MUST be set to valid existing vlan id. - vsi(3): MUST be set to valid existing ethernet virtual switch id. - vsiMpls(4): MUST be set to valid existing mpls virtual switch id. - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.2 | Unsigned32 | read-only | current |
| wwpLeosFlowSMappingSrcType OBJECT-TYPE This object specifies the SOURCE object TYPE for the entry. - - If set to 'none', the corresponding value in - wwpLeosFlowSMappingSrcValue MUST be zero(0). - - If set to port, a valid port group id must be specified. - If set to mplsVc, a valid mpls-virtual-circuit id must be specified. - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.3 | INTEGER {none(1), port(2), mplsVc(3)} | read-only | current |
| wwpLeosFlowSMappingSrcValue OBJECT-TYPE This object specifies the SOURCE object ID for the entry. - - This item must be set according to the value set - in wwpLeosFlowSMappingSrcType. If wwpLeosFlowSMappingSrcType - equals: - none(1): MUST be set to zero(0). - port(2): MUST be set to valid existing port group id. - mplsVc(3): MUST be set to valid existing mpls-virtual-circuit id. - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.4 | Unsigned32 | read-only | current |
| wwpLeosFlowSMappingDstType OBJECT-TYPE This object specifies the DESTINATION object TYPE for the entry. - - If set to 'none', the corresponding value in - wwpLeosFlowSMappingDstValue MUST be zero(0). - - If set to port, a valid port group id must be specified. - If set to mplsVc, a valid mpls-virtual-circuit id must be specified. - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.5 | INTEGER {none(1), port(2), mplsVc(3)} | read-only | current |
| wwpLeosFlowSMappingDstValue OBJECT-TYPE This object specifies the DESTINATION object ID for the entry. - - This item must be set according to the value set - in wwpLeosFlowSMappingDstType. If wwpLeosFlowSMappingDstType - equals: - none(1): MUST be set to zero(0). - port(2): MUST be set to valid existing port group id. - mplsVc(3): MUST be set to valid existing mpls-virtual-circuit id. - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.6 | Unsigned32 | read-only | current |
| wwpLeosFlowSMappingCosType OBJECT-TYPE This object specifies the CLASS OF SERVICE object TYPE for the entry. - - If set to 'none', the corresponding value in - wwpLeosFlowSMappingCosValue MUST be zero(0). - - If set to tcpSrcPort, tcpDstPort, udpSrcPort, or udpDstPort, - a valid, NON-ZERO tcp or udp port must be specified. - - If set to phb, a valid per-hop-behavior enumeration must be specified. - If set to dscp, a valid differentiated services code point must be specified. - If set to ipPrec, a valid ip-precedence must be specified. - If set to dot1dPri, a valid 802.1d/p priority must be specified. - If set to cvlan, a support Customer VLAN must be specified - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7 | INTEGER {none(1), phb(2), dscp(3), ipPrec(4), dot1dPri(5), mplsExp(6), tcpSrcPort(7), tcpDstPort(8), udpSrcPort(9), udpDstPort(10), pcp(11), cvlan(12)} | read-only | current |
| wwpLeosFlowSMappingCosValue OBJECT-TYPE This object specifies the CLASS OF SERVICE object ID for the entry. - - This item must be set according to the value set - in wwpLeosFlowSMappingCosType. If wwpLeosFlowSMappingCosType - equals: - none(1): MUST be set to zero(0). - - phb(2): (1..13) - cs0(1),cs1(2),cs2(3),cs3(4),cs4(5),cs5(6),cs6(7),cs7(8), - af1(9),af2(10),af3(11),af4(12),ef(13) - - dscp(3): (0..63) - ipPrec(4): (0..7) - dot1dPri(5): (0..7) - mplsExp(6): (0..7) - - tcpSrcPort(7): (1..65535). - tcpDstPort(8): (1..65535). - udpSrcPort(9): (1..65535). - udpDstPort(10): (1..65535). - - cvlan(12): (1..4094) - - Depending on the platform, the COS type/value may be recognized for certain - frame tag-structures. For example, some platforms can recognize ipPrec, dscp - dot1dPri only for double-tagged frames. Some require untagged or single-tagged - frames to recognize TCP/UDP ports. Operator should consult the software - configuration guide for the specified product. - - This used as index in the table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.8 | Unsigned32 | read-only | current |
| wwpLeosFlowSMappingDstSlid OBJECT-TYPE The service level id to apply to the flow at the destination point. Depending on the platform this object may or may not be set to 0 while creating the service-mapping entry. The corresponding destination-port and slid must exist in the service-level table. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.9 | Unsigned32 | read-write | current |
| wwpLeosFlowSMappingSrcSlid OBJECT-TYPE The service level ID to apply to the flow at the source-port. Depending on the platform this object may or may not be set to 0 while creating the service-mapping entry. The corresponding source-port and SLID must exist in the service-level table | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.10 | Unsigned32 | read-write | current |
| wwpLeosFlowSMappingStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.11 | RowStatus | read-create | current |
| wwpLeosFlowSMappingRedCurveOffset OBJECT-TYPE This object specifies the red curve offset to be used for given service mapping. If this object is not set then the device will choose default red curve offset which is 0. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.12 | Integer32 (0..3) | read-create | current |
| wwpLeosFlowSMappingCpuPort OBJECT-TYPE This object specifies if the CPU port is to be used as the src port. | 1.3.6.1.4.1.6141.2.60.6.1.1.13.1.13 | TruthValue | read-create | current |
| wwpLeosFlowSMappingStatsTable OBJECT-TYPE A Table of flow service statistics entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.14 | not-accessible | current | |
| wwpLeosFlowSMappingStatsEntry OBJECT-TYPE A flow service statistics entry in the wwpLeosFlowSMappingStatsTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.14.1 | not-accessible | current | |
| wwpLeosFlowSMappingStatsRxHi OBJECT-TYPE The number of bytes received for this flow service entry. This counter represents the upper 32 bits of the counter value | 1.3.6.1.4.1.6141.2.60.6.1.1.14.1.1 | Counter32 | read-only | current |
| wwpLeosFlowSMappingStatsRxLo OBJECT-TYPE The number of bytes received for this flow service entry. This counter represents the lower 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.14.1.2 | Counter32 | read-only | current |
| wwpLeosFlowSMappingStatsTxHi OBJECT-TYPE The number of bytes transmitted for this flow service entry. This counter represents the upper 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.14.1.3 | Counter32 | read-only | current |
| wwpLeosFlowSMappingStatsTxLo OBJECT-TYPE The number of bytes transmitted for this flow service entry. This counter represents the lower 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.14.1.4 | Counter32 | read-only | current |
| wwpLeosFlowSMappingStatsType OBJECT-TYPE Specifies the type of statistics for given entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.14.1.5 | INTEGER {forward(1), drop(2)} | read-write | current |
| wwpLeosFlowCosSync1dToExpTable OBJECT-TYPE A table of flow cos sync 1d to exp entries. Entries cannot be created or destroyed. | 1.3.6.1.4.1.6141.2.60.6.1.1.15 | not-accessible | current | |
| wwpLeosFlowCosSync1dToExpEntry OBJECT-TYPE A flow cos sync 1d to 1d entry in the wwpLeosFlowCosSync1dToExpTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.15.1 | not-accessible | current | |
| wwpLeosFlowCosSync1dToExpMapFrom OBJECT-TYPE This object is used as index in the table and represents cos 1d priority. Any frame coming in with this priority will be synchronized with priority specified by wwpLeosFlowCosSync1dToExpMapTo. | 1.3.6.1.4.1.6141.2.60.6.1.1.15.1.1 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowCosSync1dToExpMapTo OBJECT-TYPE This object specifies the remapped exp value of the frame which ingresses with dot1d priority of wwpLeosFlowCosSync1dToExpMapFrom. | 1.3.6.1.4.1.6141.2.60.6.1.1.15.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowCosSyncExpTo1dTable OBJECT-TYPE A table of flow cos sync 1d to exp entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.16 | not-accessible | current | |
| wwpLeosFlowCosSyncExpTo1dEntry OBJECT-TYPE A flow cos sync 1d to 1d entry in the wwpLeosFlowCosSyncExpTo1dTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.16.1 | not-accessible | current | |
| wwpLeosFlowCosSyncExpTo1dMapFrom OBJECT-TYPE This object is used as index in the table and represents cos 1d priority. Any frame coming in with this priority will be synchronized with priority specified by wwpLeosFlowCosSyncExpTo1dMapTo. | 1.3.6.1.4.1.6141.2.60.6.1.1.16.1.1 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowCosSyncExpTo1dMapTo OBJECT-TYPE This object specifies the remapped exp value of the frame which ingresses with dot1d priority of wwpLeosFlowCosSyncExpTo1dMapFrom. | 1.3.6.1.4.1.6141.2.60.6.1.1.16.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowCosSyncIpPrecTo1dTable OBJECT-TYPE A table of flow cos sync IP precedence to 1d entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.17 | not-accessible | current | |
| wwpLeosFlowCosSyncIpPrecTo1dEntry OBJECT-TYPE A flow cos sync Ip Precedence to 1d entry in the wwpLeosFlowCosSyncIpPrecTo1dTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.17.1 | not-accessible | current | |
| wwpLeosFlowCosSyncIpPrecTo1dMapFrom OBJECT-TYPE This object is used as index in the table and represents ip precedence value. Any frame coming in with wwpLeosFlowCosSyncIpPrecTo1dMapFrom IP precedence will be synchronized with dot1d specified by wwpLeosFlowCosSyncIpPrecTo1dMapTo. | 1.3.6.1.4.1.6141.2.60.6.1.1.17.1.1 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowCosSyncIpPrecTo1dMapTo OBJECT-TYPE This object specifies the ip precedence value to synchronize with when the frame ingresses with ip precedence value of wwpLeosFlowCosSyncIpPrecTo1dMapFrom. | 1.3.6.1.4.1.6141.2.60.6.1.1.17.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowCosSyncStdPhbTo1dTable OBJECT-TYPE A table of flow cos sync standard per hop behavior to 1d or Exp entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.18 | not-accessible | current | |
| wwpLeosFlowCosSyncStdPhbTo1dEntry OBJECT-TYPE A flow cos sync standard per hop behavior to 1d entry in the wwpLeosFlowCosSyncStdPhbTo1dTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.18.1 | not-accessible | current | |
| wwpLeosFlowCosSyncStdPhbTo1dMapFrom OBJECT-TYPE This object is used as index in the table and represents AFx or EF value. Any frame coming in with wwpLeosFlowCosSyncStdPhbTo1dMapFrom AFx or EF value will be synchronized with dot1d priority specified by wwpLeosFlowCosSyncStdPhbTo1dMapTo. If wwpLeosFlowCosSyncStdPhbTo1dValue is not specified then no synchronization will happen. | 1.3.6.1.4.1.6141.2.60.6.1.1.18.1.1 | INTEGER {cs0(1), cs1(2), cs2(3), cs3(4), cs4(5), cs5(6), cs6(7), cs7(8), af1(9), af2(10), af3(11), af4(12), ef(13)} | read-only | current |
| wwpLeosFlowCosSyncStdPhbTo1dMapTo OBJECT-TYPE This object specifies the AFx or EF dscp value to synchronize with when the frame ingresses with AFx or EF dscp value of wwpLeosFlowCosSyncDscpTo1dMapTo. | 1.3.6.1.4.1.6141.2.60.6.1.1.18.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowL2SacTable OBJECT-TYPE A table of flow l2 sac table. | 1.3.6.1.4.1.6141.2.60.6.1.1.19 | not-accessible | current | |
| wwpLeosFlowL2SacEntry OBJECT-TYPE Represents each entry in the l2 Sac Table | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1 | not-accessible | current | |
| wwpLeosFlowL2SacPortId OBJECT-TYPE This mib object is index in the table. If port is not involved in L2 SAC then set this value to 0. 0 represents don't care. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.1 | INTEGER (0..65535) | read-only | current |
| wwpLeosFlowL2SacNetType OBJECT-TYPE This mib object is used as index in the table. This object specifies how wwpLeosFlowSacValue should be interpreted. If this object is set to none then the wwpLeosFlowSacValue must be set to 0. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.2 | INTEGER {none(1), vlan(2), vsiEth(3), vsiMpls(4)} | read-only | current |
| wwpLeosFlowSacNetValue OBJECT-TYPE This mib object is used as index in the table. This object is only meaningful if wwpLeosFlowL2SacNetType is not set to none. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.3 | INTEGER (1..65535) | read-only | current |
| wwpLeosFlowL2SacLimit OBJECT-TYPE This mib object specifies the l2 SAC limit. Device will not learn any mac greater than the limit specified by this object. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.4 | Integer32 (0..2147483647) | read-create | current |
| wwpLeosFlowL2SacCurMac OBJECT-TYPE This mib object specifies the current mac count for the given l2 SAC entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.5 | Counter32 | read-only | current |
| wwpLeosFlowL2SacCurFilteredMac OBJECT-TYPE This mib object specifies the current number of filtered macs for the given l2 SAC entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.6 | Counter32 | read-only | current |
| wwpLeosFlowL2SacOperState OBJECT-TYPE This mib object specifies the current operation state for the given l2 SAC entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.7 | INTEGER {enabled(1), disabled(2)} | read-only | current |
| wwpLeosFlowL2SacRowStatus OBJECT-TYPE Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. | 1.3.6.1.4.1.6141.2.60.6.1.1.19.1.8 | RowStatus | read-create | current |
| wwpLeosFlowL2SacTrapState OBJECT-TYPE Specifies if device should send L2 sac traps. | 1.3.6.1.4.1.6141.2.60.6.1.1.20 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowStrictQueuingState OBJECT-TYPE Specifies if device should adjust queues to support strict queuing. | 1.3.6.1.4.1.6141.2.60.6.1.1.21 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowBwCalcMode OBJECT-TYPE Specifies if the device should operate in transport or payload mode. In transport mode the frame length of an Ethernet frame used in measuring CIR will be from IFG through FCS. In payload mode the frame length of an Ethernet frame used in measuring CIR will be from the MAC DA through FCS. | 1.3.6.1.4.1.6141.2.60.6.1.1.22 | INTEGER {transport(1), payload(2)} | read-write | current |
| wwpLeosFlowGlobal OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.1.1.23 | |||
| wwpLeosFlowServiceLevelFlowGroupState OBJECT-TYPE This object specifies the current state of service level flow groups. | 1.3.6.1.4.1.6141.2.60.6.1.1.23.1 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| wwpLeosFlowServiceMappingCosRedMappingState OBJECT-TYPE This object specifies the current state of service mapping dot1d to Red offset mapping table(wwpLeosFlowCos1dToRedCurveOffsetTable). If this object is set to disable then wwpLeosFlowCos1dToRedCurveOffsetTable will not be used for dot1d to red offset mapping else it will be used. | 1.3.6.1.4.1.6141.2.60.6.1.1.23.2 | INTEGER {disabled(1), enabled(2)} | read-write | current |
| wwpLeosFlowServiceAllRedCurveUnset OBJECT-TYPE Setting this object to true will reset all the red curves in wwpLeosFlowServiceRedCurveTable table to factory default settings. | 1.3.6.1.4.1.6141.2.60.6.1.1.23.3 | TruthValue | read-write | current |
| wwpLeosFlowServiceRedCurveTable OBJECT-TYPE A table to configure flow service red curve table. | 1.3.6.1.4.1.6141.2.60.6.1.1.24 | not-accessible | current | |
| wwpLeosFlowServiceRedCurveEntry OBJECT-TYPE Represents each entry in the flow service RED curve table. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1 | not-accessible | current | |
| wwpLeosFlowServiceRedCurveIndex OBJECT-TYPE This object is used as index in the red curve table. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.1 | Unsigned32 (5..64) | read-only | current |
| wwpLeosFlowServiceRedCurveName OBJECT-TYPE This object specifies the name of the red curve. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.2 | DisplayString (SIZE(1..31)) | read-write | current |
| wwpLeosFlowServiceRedCurveState OBJECT-TYPE This object specifies the current state of the red curve. This object can be set to enable or disable. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.3 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowServiceRedCurveMinThreshold OBJECT-TYPE This represents the minimum threshold in KBytes. When the queue length associated with this service reaches this number, RED begins to drop packets matching this Service-Mappings traffic classification. The valid range is between 0 and 65535 Kbytes. The actual number varies depending on the platform. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.4 | Unsigned32 (0..65535) | read-write | current |
| wwpLeosFlowServiceRedCurveMaxThreshold OBJECT-TYPE This represents the maximum threshold in KBytes. When the queue length associated with this service reaches this number, RED drops packets matching this Service-Mappings traffic classification at the rate specified in wwpLeosFlowServiceRedCurveDropProbability. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.5 | Unsigned32 (0..65535) | read-write | current |
| wwpLeosFlowServiceRedCurveDropProbability OBJECT-TYPE This object specifies the drop probability of a packet (matching this Service-Mapping classification) of being dropped when the queue length associated with this Service-Level reaches the value configured in wwpLeosFlowServiceMaxThreshold. The value represents a percentage (0-100). | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.6 | Unsigned32 (0..100) | read-write | current |
| wwpLeosFlowServiceRedCurveUnset OBJECT-TYPE Setting this object to true will reset the red curve settings to factory defaults. | 1.3.6.1.4.1.6141.2.60.6.1.1.24.1.7 | TruthValue | read-write | current |
| wwpLeosFlowCos1dToRedCurveOffsetTable OBJECT-TYPE A table of flow cos 1d to red curve offset entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.25 | not-accessible | current | |
| wwpLeosFlowCos1dToRedCurveOffsetEntry OBJECT-TYPE A table entry of flow cos 1d to red curve offset. | 1.3.6.1.4.1.6141.2.60.6.1.1.25.1 | not-accessible | current | |
| wwpLeosFlowCos1dToRedCurveOffset1dValue OBJECT-TYPE This object is used as index in the table and represents cos 1d priority. Any frame coming in with this priority will be mapped to red cos offset value specified by wwpLeosFlowCos1dToRedCurveOffsetValue. | 1.3.6.1.4.1.6141.2.60.6.1.1.25.1.1 | Unsigned32 (0..7) | read-only | current |
| wwpLeosFlowCos1dToRedCurveOffsetValue OBJECT-TYPE This object specifies the red curve offset value to be used when frame which ingresses with dot1d priority specified by wwpLeosFlowCos1dToRedCurveOffset1dValue. | 1.3.6.1.4.1.6141.2.60.6.1.1.25.1.2 | Unsigned32 (0..3) | read-write | current |
| wwpLeosFlowCosMapPCPTo1dTable OBJECT-TYPE A table of flow cos mapping of PCP to .1d Pri. | 1.3.6.1.4.1.6141.2.60.6.1.1.26 | not-accessible | current | |
| wwpLeosFlowCosMapPCPTo1dEntry OBJECT-TYPE A flow cos sync standard per hop behavior to 1d entry in the wwpLeosFlowCosSyncStdPhbTo1dTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.26.1 | not-accessible | current | |
| wwpLeosFlowCosMapPCPTo1dMapFrom OBJECT-TYPE This object is used as index in the table and represents PCP priority. Any frame coming in with wwpLeosFlowCosMapPCPTo1dMapFrom priority will be mapped to .1d priority specified by wwpLeosFlowCosMapPCPTo1dMapTo. | 1.3.6.1.4.1.6141.2.60.6.1.1.26.1.1 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowCosMapPCPTo1dMapTo OBJECT-TYPE This object specifies the .1d priority to map with when the frame ingresses with PCP priority specified by wwpLeosFlowCosMapPCPTo1dMapFrom. | 1.3.6.1.4.1.6141.2.60.6.1.1.26.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowCosMap1dToPCPTable OBJECT-TYPE A table of flow cos mapping of PCP to .1d Pri. | 1.3.6.1.4.1.6141.2.60.6.1.1.27 | not-accessible | current | |
| wwpLeosFlowCosMap1dToPCPEntry OBJECT-TYPE A flow cos sync standard per hop behavior to 1d entry in the wwpLeosFlowCosSyncStdPhbTo1dTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.27.1 | not-accessible | current | |
| wwpLeosFlowCosMap1dToPCPMapFrom OBJECT-TYPE This object is used as index in the table and represents PCP priority. Any frame coming in with wwpLeosFlowCosMap1dToPCPMapFrom priority will be mapped to .1d priority specified by wwpLeosFlowCosMap1dToPCPMapTo. | 1.3.6.1.4.1.6141.2.60.6.1.1.27.1.1 | INTEGER (0..7) | read-only | current |
| wwpLeosFlowCosMap1dToPCPMapTo OBJECT-TYPE This object specifies the .1d priority to map with when the frame ingresses with PCP priority specified by wwpLeosFlowCosMap1dToPCPMapFrom. | 1.3.6.1.4.1.6141.2.60.6.1.1.27.1.2 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowMacMotionEventsEnable OBJECT-TYPE Specifies whether MAC Motion traps and syslog messages will be generated when a MAC shifts from one port/vlan to another port/vlan. | 1.3.6.1.4.1.6141.2.60.6.1.1.28 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowMacMotionEventsInterval OBJECT-TYPE The minimum time in seconds that must elapse between each MAC Motion trap and syslog message that is generated. | 1.3.6.1.4.1.6141.2.60.6.1.1.29 | INTEGER (15..300) | read-write | current |
| wwpLeosFlowCpuRateLimitsEnable OBJECT-TYPE Enable is used to activate the port-associated rate-limits. | 1.3.6.1.4.1.6141.2.60.6.1.1.30 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowCpuRateLimitTable OBJECT-TYPE A table of flow rate limit entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.31 | not-accessible | current | |
| wwpLeosFlowCpuRateLimitEntry OBJECT-TYPE The flow service level entry in the Table. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1 | not-accessible | current | |
| wwpLeosFlowCpuRateLimitPort OBJECT-TYPE Port id used as index in the rate limit entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.1 | INTEGER (1..64) | not-accessible | current |
| wwpLeosFlowCpuRateLimitEnable OBJECT-TYPE Enable is used to activate the port-associated rate-limits. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.2 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowCpuRateLimitBootp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.3 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitCfm OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.4 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitCft OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.5 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitDot1x OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.6 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitOam OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.7 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitEprArp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.8 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitIgmp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.9 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitInet OBJECT-TYPE Port packet-per-second rate limit for packet type . | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.10 | INTEGER (0..5000) | read-write | current |
| wwpLeosFlowCpuRateLimitLacp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.11 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitLldp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.12 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitMpls OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.13 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitMstp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.14 | INTEGER (0..500) | read-write | current |
| wwpLeosFlowCpuRateLimitPeArp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.15 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitPvst OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.16 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitRstp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.17 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitLpbk OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.18 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitRmtLpbk OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.19 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitCxeRx OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.20 | INTEGER (0..500) | read-write | current |
| wwpLeosFlowCpuRateLimitCxeTx OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.21 | INTEGER (0..500) | read-write | current |
| wwpLeosFlowCpuRateLimitTwamp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.22 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitDflt OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.23 | INTEGER (0..10000) | read-write | current |
| wwpLeosFlowCpuRateLimitTwampRsp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.24 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitMultiCast OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.25 | INTEGER (0..1000) | read-write | current |
| wwpLeosFlowCpuRateLimitBroadCast OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.26 | INTEGER (0..500) | read-write | current |
| wwpLeosFlowCpuRateLimitArp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.27 | INTEGER (0..1000) | read-write | current |
| wwpLeosFlowCpuRateLimitIcmp OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.28 | INTEGER (0..1000) | read-write | current |
| wwpLeosFlowCpuRateLimitTcpSyn OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.29 | INTEGER (0..1000) | read-write | current |
| wwpLeosFlowCpuRateLimitRaps OBJECT-TYPE Port packet-per-second rate limit for packet type. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.30 | INTEGER (0..2500) | read-write | current |
| wwpLeosFlowCpuRateLimitIpMgmt OBJECT-TYPE Port packet-per-second rate limit for packet type. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.31 | INTEGER (0..5000) | read-write | current |
| wwpLeosFlowCpuRateLimitIpControl OBJECT-TYPE Port packet-per-second rate limit for packet type. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.32 | INTEGER (0..5000) | read-write | current |
| wwpLeosFlowCpuRateLimitIpV6Mgmt OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.33 | INTEGER (0..5000) | read-write | current |
| wwpLeosFlowCpuRateLimitInet6 OBJECT-TYPE Port packet-per-second rate limit for packet type. | 1.3.6.1.4.1.6141.2.60.6.1.1.31.1.34 | INTEGER (0..5000) | read-write | current |
| wwpLeosFlowCpuRateLimitStatsTable OBJECT-TYPE A table of flow rate limit statistics entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.32 | not-accessible | current | |
| wwpLeosFlowCpuRateLimitStatsEntry OBJECT-TYPE The rate limit statistics entry in the Table. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1 | not-accessible | current | |
| wwpLeosFlowCpuRateLimitStatsPort OBJECT-TYPE Port id used as index in the rate limit entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.1 | INTEGER (1..64) | not-accessible | current |
| wwpLeosFlowCpuRateLimitStatsBootpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.2 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCfmPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.3 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCftPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.4 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsDot1xPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.5 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsOamPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.6 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsEprArpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.7 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIgmpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.8 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsInetPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.9 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsLacpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.10 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsLldpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.11 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsMplsPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.12 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsMstpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.13 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsPeArpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.14 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsPvstPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.15 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsRstpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.16 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsLpbkPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.17 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsRmtLpbkPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.18 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCxeRxPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.19 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCxeTxPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.20 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsTwampPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.21 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsDfltPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.22 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsBootpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.23 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCfmDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.24 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCftDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.25 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsDot1xDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.26 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsOamDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.27 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsEprArpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.28 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIgmpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.29 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsInetDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.30 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsLacpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.31 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsLldpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.32 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsMplsDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.33 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsMstpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.34 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsPeArpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.35 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsPvstDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.36 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsRstpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.37 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsLpbkDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.38 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsRmtLpbkDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.39 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCxeRxDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.40 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsCxeTxDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.41 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsTwampDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.42 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsDfltDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.43 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsTwampRspPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.44 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsTwampRspDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.45 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsMultiCastPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.46 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsMultiCastDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.47 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsBroadCastPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.48 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsBroadCastDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.49 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsArpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.50 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsArpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.51 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIcmpPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.52 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIcmpDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.53 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsTcpSynPassed OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.54 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsTcpSynDropped OBJECT-TYPE Port packet type counts. | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.55 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsRapsPassed OBJECT-TYPE Port packet type counts.Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.56 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsRapsDropped OBJECT-TYPE Port packet type counts.Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.57 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIpMgmtPassed OBJECT-TYPE Port packet type counts.Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.58 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIpMgmtDropped OBJECT-TYPE Port packet type counts.Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.59 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIpControlPassed OBJECT-TYPE Port packet type counts. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.60 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIpControlDropped OBJECT-TYPE Port packet type counts. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.61 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIpV6MgmtPassed OBJECT-TYPE Port packet type counts. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.62 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsIpV6MgmtDropped OBJECT-TYPE Port packet type counts. Not supported on 4.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.63 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsInet6Passed OBJECT-TYPE Port packet type counts for Ipv6. Not supported on 6.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.64 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsInet6Dropped OBJECT-TYPE Port packet type counts for Ipv6. Not supported on 6.x | 1.3.6.1.4.1.6141.2.60.6.1.1.32.1.65 | Gauge32 | read-only | current |
| wwpLeosFlowCpuRateLimitStatsClearTable OBJECT-TYPE A table of flow rate limit entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.33 | not-accessible | current | |
| wwpLeosFlowCpuRateLimitStatsClearEntry OBJECT-TYPE The flow service level entry in the Table. | 1.3.6.1.4.1.6141.2.60.6.1.1.33.1 | not-accessible | current | |
| wwpLeosFlowCpuRateLimitStatsClearPort OBJECT-TYPE Port id used as index in the rate limit statistics clear entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.33.1.1 | INTEGER (1..64) | not-accessible | current |
| wwpLeosFlowCpuRateLimitStatsClear OBJECT-TYPE Flag indicating whether to clear port packet statistics. | 1.3.6.1.4.1.6141.2.60.6.1.1.33.1.2 | TruthValue | read-write | current |
| wwpLeosFlowServiceTotalStatsTable OBJECT-TYPE A table of flow service statistics entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.34 | not-accessible | current | |
| wwpLeosFlowServiceTotalStatsEntry OBJECT-TYPE A flow service statistics entry in the wwpLeosFlowServiceTotalStatsTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.34.1 | not-accessible | current | |
| wwpLeosFlowServiceTotalStatsRxHi OBJECT-TYPE The number of bytes received for this flow service entry. This counter represents the upper 32 bits of the counter value | 1.3.6.1.4.1.6141.2.60.6.1.1.34.1.1 | Counter32 | read-only | current |
| wwpLeosFlowServiceTotalStatsRxLo OBJECT-TYPE The number of bytes received for this flow service entry. This counter represents the lower 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.34.1.2 | Counter32 | read-only | current |
| wwpLeosFlowServiceTotalStatsTxHi OBJECT-TYPE The number of bytes transmitted for this flow service entry. This counter represents the upper 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.34.1.3 | Counter32 | read-only | current |
| wwpLeosFlowServiceTotalStatsTxLo OBJECT-TYPE The number of bytes transmitted for this flow service entry. This counter represents the lower 32 bits of the counter value. | 1.3.6.1.4.1.6141.2.60.6.1.1.34.1.4 | Counter32 | read-only | current |
| wwpLeosFlowServiceTotalStatsType OBJECT-TYPE Specifies the type of statistics for given entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.34.1.5 | INTEGER {forward(1), drop(2)} | read-only | current |
| wwpLeosFlowPortServiceLevelTable OBJECT-TYPE A Table of flow Port Service Level entries. | 1.3.6.1.4.1.6141.2.60.6.1.1.40 | not-accessible | current | |
| wwpLeosFlowPortServiceLevelEntry OBJECT-TYPE A flow service statistics entry in the wwpLeosFlowPortServiceLevelTable. | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1 | not-accessible | current | |
| wwpLeosFlowPortServiceLevelPort OBJECT-TYPE Port id used as index in the port service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.1 | INTEGER (0..65535) | read-only | current |
| wwpLeosFlowPortServiceLevelMaxBandwidth OBJECT-TYPE Sets the max egress bandwidth on a port. | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.2 | Integer32 (0..8000000) | read-write | current |
| wwpLeosFlowPortServiceLevelQueueSize OBJECT-TYPE The size of the traffic queue provisioned for this port service level entry. This may also be referred to as Latency Tolerance. | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.3 | INTEGER {size0KB(0), size16KB(1), size32KB(2), size64KB(3), size128KB(4), size256KB(5), size512KB(6), size1MB(7), size2MB(8), size4MB(9)} | read-write | current |
| wwpLeosFlowPortServiceLevelQueueSizeYellow OBJECT-TYPE The size of the yellow traffic queue provisioned for this service level entry. Also known as the discard preferred queue size. | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.4 | INTEGER {size16KB(1), size32KB(2), size64KB(3), size128KB(4)} | read-write | current |
| wwpLeosFlowPortServiceLevelQueueSizeRed OBJECT-TYPE The size of the red traffic queue provisioned for this service level entry. Also known as the discard wanted queue size | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.5 | INTEGER {size16KB(1), size32KB(2), size64KB(3), size128KB(4)} | read-write | current |
| wwpLeosFlowPortServiceLevelFlowGroup OBJECT-TYPE Service level Id direction used as index in the service level entry. | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.6 | INTEGER {enable(1), disable(2)} | read-write | current |
| wwpLeosFlowPortServiceLevelRedCurve OBJECT-TYPE This object is used to specifies the red curve index to be used for the given port service level. If this OID is not specified, the system will use the default value of this object which is the default port red-curve (zero). Valid values for this OID are 0, 5-64 | 1.3.6.1.4.1.6141.2.60.6.1.1.40.1.7 | Unsigned32 (0..64) | read-create | current |
| wwpLeosFlowBurstConfigBacklogLimit OBJECT-TYPE Sets the queue backlog-limit | 1.3.6.1.4.1.6141.2.60.6.1.1.41 | Unsigned32 (0..131072) | read-write | current |
| wwpLeosFlowBurstConfigMulticastLimit OBJECT-TYPE Sets the multicast backlog-limit | 1.3.6.1.4.1.6141.2.60.6.1.1.42 | Unsigned32 (0..131072) | read-write | current |
| wwpLeosFlowBurstConfigVlanPriFltrOnThld OBJECT-TYPE The threshold of buffer use at which Vlan Priority Filtering is activated if enabled | 1.3.6.1.4.1.6141.2.60.6.1.1.43 | INTEGER (0..255) | read-write | current |
| wwpLeosFlowBurstConfigVlanPriFltrOffThld OBJECT-TYPE The threshold of buffer use at which Vlan Priority Filtering is deactivated if enabled | 1.3.6.1.4.1.6141.2.60.6.1.1.44 | INTEGER (0..255) | read-write | current |
| wwpLeosFlowBurstConfigVlanPriFltrPriMatch OBJECT-TYPE when the Vlan Priority filter is activated all priorities less than this are dropped | 1.3.6.1.4.1.6141.2.60.6.1.1.45 | INTEGER (0..7) | read-write | current |
| wwpLeosFlowBurstConfigVlanPriFltrState OBJECT-TYPE Globaly enables or disabled the Flow Vlan Priority Filter | 1.3.6.1.4.1.6141.2.60.6.1.1.46 | INTEGER {enabled(1), disabled(2)} | read-write | current |
| wwpLeosFlowNotifAttrs OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.1.2 | |||
| wwpLeosFlowMacMotionAttrOldPort OBJECT-TYPE The port number associated with the MAC that moved. | 1.3.6.1.4.1.6141.2.60.6.1.2.1 | INTEGER (1..65536) | accessible-for-notify | current |
| wwpLeosFlowMacMotionAttrOldVlan OBJECT-TYPE The vlan number associated with the MAC that moved. | 1.3.6.1.4.1.6141.2.60.6.1.2.2 | INTEGER (1..4094) | accessible-for-notify | current |
| wwpLeosFlowMacMotionAttrNewPort OBJECT-TYPE The port number associated with the MAC that moved. | 1.3.6.1.4.1.6141.2.60.6.1.2.3 | INTEGER (1..65536) | accessible-for-notify | current |
| wwpLeosFlowMacMotionAttrNewVlan OBJECT-TYPE The vlan number associated with the MAC that moved. | 1.3.6.1.4.1.6141.2.60.6.1.2.4 | INTEGER (1..4094) | accessible-for-notify | current |
| wwpLeosFlowMacMotionAttrMacAddr OBJECT-TYPE The MAC address that moved. | 1.3.6.1.4.1.6141.2.60.6.1.2.5 | MacAddress | accessible-for-notify | current |
| wwpLeosFlowNotificationPrefix OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.2 | |||
| wwpLeosFlowNotifications OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.2.0 | |||
| wwpLeosFlowMIBConformance OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.3 | |||
| wwpLeosFlowMIBCompliances OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.3.1 | |||
| wwpLeosFlowMIBGroups OBJECT-IDENTITY | 1.3.6.1.4.1.6141.2.60.6.3.2 |
Notifications
| Name | OID | Status |
|---|---|---|
| wwpLeosFlowServiceLevelPortOverProvisionedTrap NOTIFICATION-TYPE A wwpLeosFlowServiceLevelPortOverProvisionedTrap notification is sent when the provisioned bandwidth exceeds the total bandwidth available for a port. This situation may also occur when changes in a link aggregation group (such as deleting a port from the group) decrease the total bandwidth or at the bootTime when the link aggregation groups are formed. | 1.3.6.1.4.1.6141.2.60.6.2.0.1 | current |
| wwpLeosFlowServiceLevelPortUnderProvisionedTrap NOTIFICATION-TYPE A wwpLeosFlowServiceLevelPortUnderProvisionedTrap notification is sent when the previously over-provisioned situation is resolved for a port. | 1.3.6.1.4.1.6141.2.60.6.2.0.2 | current |
| wwpLeosFlowL2SacHighThreshold NOTIFICATION-TYPE A wwpLeosFlowL2SacHighThreshold notification is sent whenever Macs learned exceeds SAC threshold limit. | 1.3.6.1.4.1.6141.2.60.6.2.0.3 | current |
| wwpLeosFlowL2SacNormalThreshold NOTIFICATION-TYPE A wwpLeosFlowL2SacNormalThreshold notification is sent whenever Macs learned gets back to normal after exceeding the SAC threshold limit. | 1.3.6.1.4.1.6141.2.60.6.2.0.4 | current |
| wwpLeosFlowMacMotionNotification NOTIFICATION-TYPE A wwpLeosFlowMacMotionNotification is sent whenever a learned MAC moves from one port/vlan to a new port/vlan, at a rate defined by wwpLeosFlowMacMotionEventsInterval. The five objects returned by this trap are the MAC address that moved, the original port/vlan the MAC was learned on, and the new port/vlan the MAC has moved to. | 1.3.6.1.4.1.6141.2.60.6.2.0.5 | current |