MIBs Depot

WWP-LEOS-FILE-TRANSFER-MIB

Registered at
1.3.6.1.4.1.6141.2.60.23
Last updated
2012-03-22 00:00
Organization
Ciena, Inc
Revisions
2012-03-22 00:00, 2001-04-03 17:00
Namespace
ciena
Source file
WWP-LEOS-FILE-TRANSFER-MIB
Digest
sha256:7fa5a53796766542255edc3211f971371ef8d6aede6e910bab7e5fdcbde94029

Description

The MIB module for the WWP TFTP Operation to download a file.

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
INET-ADDRESS-MIBInetAddress, InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIIpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, TEXTUAL-CONVENTION, TruthValue
WWP-SMIwwpModulesLeos

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

INET-ADDRESS-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WWP-LEOS-FILE-TRANSFER-MIB
WWP-SMI

Textual conventions

NameOIDSyntaxAccessStatus
FileTransferFailCause
TEXTUAL-CONVENTION
The reason a File transfer request failed.
current
FileTransferState
TEXTUAL-CONVENTION
The state of a File transfer operation. The description of each state is given below: idle: No file transfer operation is in place. sending: this state signifies that the file is being sent to the TFTP server. receiving: this state signifies that the file is being received from the TFTP server. transferComplete: the state when a file transfer request is successfully completed. failed: the file transfer request was unsuccesful.
current

Objects

NameOIDSyntaxAccessStatus
wwpLeosFileTransferMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.1
wwpLeosFileTransfer
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.1.1
wwpLeosFTransferOp
OBJECT-TYPE
Used to transfer file(s) between a TFTP server (remote) and the device(local). All transfers are binary. There are three types of file transfers: sendFile sends a file to the host TFTP server. getFile receives a file from the host server. getCmdFile gets the specified file from the host and parses that file for additional operations to be performed. This is the mechanism used to upgrade the device with new software.
1.3.6.1.4.1.6141.2.60.23.1.1.1INTEGER {none(0), sendFile(1), getFile(2), getCmdFile(3)}read-writecurrent
wwpLeosFTransferServerAddr
OBJECT-TYPE
The IP address of the TFTP server from (or to) which to transfer the file.Address must be a unicast address that is reachable from the agent and no firewalls or ACLs preventing TFTP datagrams from being transferred. wwpLeosFTransferServerInetAddr cannot be set at the same time. This OID will be set to 0.0.0.0 when the server has an IPv6 address, which is shown in the wwpLeosFTransferServerInetAddr and the wwpLeosDnsServerInetAddrType is set to ipv6. For a server with an IPv4 address, the ip address will be shown in this OID and the wwpLeosFTransferServerInetAddr with the wwpLeosDnsServerInetAddrType set to ipv4.
1.3.6.1.4.1.6141.2.60.23.1.1.2IpAddressread-writecurrent
wwpLeosFTransferRemoteFilename
OBJECT-TYPE
The file name (including the path, if applicable) to be retrieved from the TFTP server. If the switch/device is downloading a file, then this should be the name of the file on the remote server. Length of filename string must not exceed 64 alpha-numeric characters, no spaces in filenames.
1.3.6.1.4.1.6141.2.60.23.1.1.3OCTET STRING (SIZE(1..64))read-writecurrent
wwpLeosFTransferLocalFilename
OBJECT-TYPE
The file name (including the path, if applicable) to be written to. If the switch/device is downloading a file, then this should be the name of the file on the switch/device. Length of filename string must not exceed 64 alpha-numeric characters, no spaces in filenames. By default it will have the same value as of wwpLeosFTransferRemoteFilename.
1.3.6.1.4.1.6141.2.60.23.1.1.4OCTET STRING (SIZE(1..64))read-writecurrent
wwpLeosFTransferActivate
OBJECT-TYPE
Activate the file transfer operation with a value of True(1). The object will return to 'false' once the file transfer is completed. Poll wwpLeosFTransferStatus for current status. Default value is False. wwpLeosFTransferRemoteFileName, wwpLeosFTransferServerAddress and wwpLeosFTransferOp must be valid prior to setting this object to True.
1.3.6.1.4.1.6141.2.60.23.1.1.5TruthValueread-writecurrent
wwpLeosFTransferNotifOnCompletion
OBJECT-TYPE
Specifies whether or not a wwpLeosFTransferCompletion notification should be issued on completion of the TFTP transfer. If such a notification is desired, it is the responsibility of the management entity to ensure that the SNMP administrative model is configured in such a way as to allow the notification to be delivered.
1.3.6.1.4.1.6141.2.60.23.1.1.6TruthValueread-writecurrent
wwpLeosFTransferStatus
OBJECT-TYPE
Specifies the state of this file transfer request. If no file transfer request is being processed, then the wwpLeosFTransferStatus should be 'idle'.
1.3.6.1.4.1.6141.2.60.23.1.1.7FileTransferStateread-onlycurrent
wwpLeosFTransferFailCause
OBJECT-TYPE
The reason why the file transfer operation failed. If no file transfer request is being processed, then the wwpLeosFTransferFileCause should be 'noStatus'.
1.3.6.1.4.1.6141.2.60.23.1.1.8FileTransferFailCauseread-onlycurrent
wwpLeosFTransferNotificationStatus
OBJECT-TYPE
The status of the file transfer which is to be reported via the FileTransfer Notification.
1.3.6.1.4.1.6141.2.60.23.1.1.9INTEGER {downloadSuccess(0), tftpServerNotFound(1), couldNotGetFile(2), cmdFileParseError(3), internalFilesystemError(4), inValidFileContents(5), flashOffline(6), noStatus(7), putSuccessful(8), couldNotPutFile(9), badFileCrc(10), allFilesSkipped(11), fileAlreadyExist(12), fileGetError(13), filePutError(14), fileSystemError(15), fileContentsInvalid(16), serverIpAddrInvalid(18), filePathInvalid(19), fileNameInvalid(20), sourceNotFound(21), fileNameNeeded(22), notEnoughSpace(23), internalError(24)}read-onlycurrent
wwpLeosFTransferNotificationInfo
OBJECT-TYPE
The string explaining the error code in detail or the additional info for the file transfer completion.
1.3.6.1.4.1.6141.2.60.23.1.1.10OCTET STRING (SIZE(0..512))read-onlycurrent
wwpLeosFTransferServerInetAddrType
OBJECT-TYPE
The Inet address type of the TFTP server from (or to) which to transfer the file. Used in conjunction with wwpLeosFTransferServerInetAddr. When set to : ipv4: wwpLeosFTransferServerInetAddr should be compliant with InetAddressIPv4 from RFC 4001 ipv6: wwpLeosFTransferServerInetAddr should be compliant with InetAddressIPv6 from RFC 4001
1.3.6.1.4.1.6141.2.60.23.1.1.11InetAddressTyperead-writecurrent
wwpLeosFTransferServerInetAddr
OBJECT-TYPE
The Inet address of the TFTP server from (or to) which to transfer the file. Address must be a unicast address that is reachable from the agent and no firewalls or ACLs preventing TFTP datagrams from being transferred. This OID must be used in conjuction with wwpLeosFTransferServerInetAddrType. The InetAddress set here should be compliant with rfc 4001 InetAddressType. When this OID is set, wwpLeosFTransferServerAddr is set ot 0.0.0.0.
1.3.6.1.4.1.6141.2.60.23.1.1.12InetAddressread-writecurrent
wwpLeosFileTransferMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.2
wwpLeosFiletransferMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.2.0
wwpLeosFileTransferMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.3
wwpLeosFileTransferMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.3.1
wwpLeosFileTransferMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.23.3.2

Notifications

NameOIDStatus
wwpLeosFTransferCompletion
NOTIFICATION-TYPE
A wwpLeosFTransferCompletion notification is sent at the completion of a file transfer request.
1.3.6.1.4.1.6141.2.60.23.2.0.1current

Conformance

NameOIDStatus
wwpLeosFileTransferCompliance
MODULE-COMPLIANCE
The compliance statement of the wwpLeosFileTransfer MIB.
1.3.6.1.4.1.6141.2.60.23.3.1.1current
wwpLeosFileTransferIPv6Group
OBJECT-GROUP
File transfer objects for IPv6 address.
1.3.6.1.4.1.6141.2.60.23.3.2.1current