MIBs Depot

WWP-LEOS-CFM-MIB

Registered at
1.3.6.1.4.1.6141.2.60.35
Last updated
2012-04-11 00:00
Organization
Ciena, Inc
Revisions
2012-04-11 00:00, 2012-02-03 00:00, 2011-07-26 00:00, 2011-05-31 00:00, 2011-01-31 00:00, 2010-07-15 00:00, 2009-11-16 00:00, 2009-09-04 17:00, 2009-08-06 19:00, 2009-07-30 19:00, 2008-11-14 17:00, 2008-10-23 17:00, 2007-10-24 17:00, 2006-04-18 17:00
Namespace
ciena
Source file
WWP-LEOS-CFM-MIB
Digest
sha256:b5af2602cecf925460340f6a83ab6933cdf09c93e9e980aa3ee3abc767e466b8

Description

Connectivity Fault Management (CFM) MIB for configuration and monitoring CFM

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-MIBsysName
SNMPv2-SMICounter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
WWP-SMIwwpModulesLeos

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
WWP-LEOS-CFM-MIB
WWP-SMI

Textual conventions

NameOIDSyntaxAccessStatus
CfmDisplayString
TEXTUAL-CONVENTION
Represents the cfm display string.
current
CfmMAID
TEXTUAL-CONVENTION
Binary data representing the md name and ma name.
current
Dot1agCfmMaintAssocName
TEXTUAL-CONVENTION
Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Maintenance Association Identifier (MAID).
current
Dot1agCfmMaintAssocNameType
TEXTUAL-CONVENTION
A value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. primaryVid(1) Primary VLAN ID. 12 bits represented in a 2-octet integer: - 4 least significant bits of the first byte contains the 4 most significant bits of the 12 bits primary VID - second byte contains the 8 least significant bits of the primary VID 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ |0 0 0 0| (MSB) | +-+-+-+-+-+-+-+-+ | VID LSB | +-+-+-+-+-+-+-+-+ charString(2) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. (1..45) octets unsignedInt16 (3) 2-octet integer/big endian rfc2865VpnId(4) RFC 2685 VPN ID 3 octet VPN authority Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to the OUI: 0 1 2 3 4 5 6 7 8 +-+-+-+-+-+-+-+-+ | VPN OUI (MSB) | +-+-+-+-+-+-+-+-+ | VPN OUI | +-+-+-+-+-+-+-+-+ | VPN OUI (LSB) | +-+-+-+-+-+-+-+-+ |VPN Index (MSB)| +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ | VPN Index | +-+-+-+-+-+-+-+-+ |VPN Index (LSB)| +-+-+-+-+-+-+-+-+ ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63]
current
Dot1agCfmMaintDomainName
TEXTUAL-CONVENTION
Denotes a generic Maintenance Domain Name.
current
Dot1agCfmMaintDomainNameType
TEXTUAL-CONVENTION
A value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolutely needed. none(1) No format specified, usually because there is not (yet) a Maintenance Domain Name. In this case, a zero length OCTET STRING for the Domain Name field is acceptable. dnsLikeName(2) Domain Name like string, globally unique text string derived from a DNS name. macAddrAndUint(3) MAC address + 2-octet (unsigned) integer. charString(4) RFC2579 DisplayString, except that the character codes 0-31 (decimal) are not used. ieeeReserved(xx) Reserved for definition by IEEE 802.1 xx values can be [5..31] and [64..255] ituReserved(xx) Reserved for definition by ITU-T Y.1731 xx values range from [32..63]
current
EthType
TEXTUAL-CONVENTION
Represents the ethernet type.
current
SendState
TEXTUAL-CONVENTION
Represents the action for the row. Send (1): the message with the corresponding parameters is to be sent to the Target host Clear (2): Clears the counters of the particular entry Cancel (3)
current

Objects

NameOIDSyntaxAccessStatus
wwpLeosCfmMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1
wwpLeosCfmGlobal
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1
wwpLeosCfmState
OBJECT-TYPE
This object allows to globally configure CFM state.
1.3.6.1.4.1.6141.2.60.35.1.1.1INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmEtherType
OBJECT-TYPE
This object specifies the Ethernet type value for CFM frames.
1.3.6.1.4.1.6141.2.60.35.1.1.2EthTyperead-writecurrent
wwpLeosCfmMEPHoldTime
OBJECT-TYPE
This object specifies the Time in ms to hold a MEP in an inactive state.
1.3.6.1.4.1.6141.2.60.35.1.1.3Integer32read-writecurrent
wwpLeosCfmCcmAvailable
OBJECT-TYPE
This object specifies the current CCM available.
1.3.6.1.4.1.6141.2.60.35.1.1.4Counter32read-onlycurrent
wwpLeosCfmY1731EtherType
OBJECT-TYPE
This object specifies the Optional Alternate Ethernet type for Y.1731 frames.
1.3.6.1.4.1.6141.2.60.35.1.1.5EthTyperead-writecurrent
wwpLeosCfmL2LoopDetectState
OBJECT-TYPE
This object allows to globally configure CFM's Layer 2 Loop detection state. Frames received by the switch that have a Source MAC of the the switch will be discarded.
1.3.6.1.4.1.6141.2.60.35.1.1.6INTEGER {off(1), on(2)}read-writecurrent
wwpLeosCfmDot1adStrict
OBJECT-TYPE
Controls compliance of processing 802.1ad encapsulated CFM frames in accordance with the 8021.ag standard. When on (1) CFM frames containing more than one VLAN tag are forwarded as normal data frames, bypassing processing by MEPs and MIPs. When off (2) CFM frames with multiple VLAN tags are subject to normal CFM processing.
1.3.6.1.4.1.6141.2.60.35.1.1.7INTEGER {on(1), off(2)}read-writecurrent
wwpLeosCfmMipLevelEnforcement
OBJECT-TYPE
Controls enforcement of a MIPs associated MD Level. When on (1) a MIP will only process CFM messages received at its level. When off (2) a MIP will process frames received at any level.
1.3.6.1.4.1.6141.2.60.35.1.1.8INTEGER {on(1), off(2)}read-writecurrent
wwpLeosCfmMipCcmDbState
OBJECT-TYPE
The administrative state of the MIP CCM Database. A MIP only records CCMs in the MIP CCM Database when this object is set to enable (1).
1.3.6.1.4.1.6141.2.60.35.1.1.9INTEGER {enable(1), disable(2)}read-writecurrent
wwpLeosCfmLBMDefaultCount
OBJECT-TYPE
The global default loopback message count.
1.3.6.1.4.1.6141.2.60.35.1.1.10Integer32read-writedeprecated
wwpLeosCfmLBMDefaultInterval
OBJECT-TYPE
The global default loopback message interval.
1.3.6.1.4.1.6141.2.60.35.1.1.11Integer32read-writedeprecated
wwpLeosCfmLBMDefaultTimeout
OBJECT-TYPE
The global default loopback message timeout.
1.3.6.1.4.1.6141.2.60.35.1.1.12Integer32read-writedeprecated
wwpLeosCfmFrameClassifierMode
OBJECT-TYPE
Configures the hardware frame classification mode used to detect CFM and Y.1731 frames that should be sent to the CPU for processing. Changing this mode will cause a reboot of the device.
1.3.6.1.4.1.6141.2.60.35.1.1.13INTEGER {etype(1), etypeMd(2)}read-writedeprecated
wwpLeosCfmGlobalLBMDefaultCount
OBJECT-TYPE
The global default loopback message count.
1.3.6.1.4.1.6141.2.60.35.1.1.16Integer32read-writecurrent
wwpLeosCfmGlobalLBMDefaultInterval
OBJECT-TYPE
The global default loopback message interval.
1.3.6.1.4.1.6141.2.60.35.1.1.17Integer32read-writecurrent
wwpLeosCfmGlobalLBMDefaultTimeout
OBJECT-TYPE
The global default loopback message timeout.
1.3.6.1.4.1.6141.2.60.35.1.1.18Integer32read-writecurrent
wwpLeosCfmGlobalFrameClassifierMode
OBJECT-TYPE
Configures the hardware frame classification mode used to detect CFM and Y.1731 frames that should be sent to the CPU for processing. Changing this mode will cause a reboot of the device.
1.3.6.1.4.1.6141.2.60.35.1.1.19INTEGER {etype(1), etypeMd(2)}read-writecurrent
wwpLeosCfmGlobalFrameBudget
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.24
wwpLeosCfmGlobalControlModuleFrameBudget
OBJECT-TYPE
Control Module Frame Budget . Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.1.24.1Counter32read-onlycurrent
wwpLeosCfmGlobalFrameBudgetTable
OBJECT-TYPE
Global Frame Budget Table
1.3.6.1.4.1.6141.2.60.35.1.1.24.2not-accessiblecurrent
wwpLeosCfmGlobalFrameBudgetEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmServiceTable. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1not-accessiblecurrent
wwpLeosCfmGlobalFrameBudgetSlotIndex
OBJECT-TYPE
Slot Index
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.1Unsigned32not-accessiblecurrent
wwpLeosCfmGlobalFrameBudgetValue
OBJECT-TYPE
Frame budget value
1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2Counter32read-onlycurrent
wwpLeosCfmGlobalStats
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.25
wwpLeosCfmStatsTotalTx
OBJECT-TYPE
The number of frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.1Counter64read-onlycurrent
wwpLeosCfmStatsTotalRx
OBJECT-TYPE
The number of frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.2Counter64read-onlycurrent
wwpLeosCfmStatsTxFloodedFrames
OBJECT-TYPE
The number of Flooded frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.3Counter64read-onlycurrent
wwpLeosCfmStatsTxFloodedIgnoredStpState
OBJECT-TYPE
The number of flooded ignored frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.4Counter64read-onlycurrent
wwpLeosCfmStatsRxTotalValidFrames
OBJECT-TYPE
The number of valid frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.5Counter64read-onlycurrent
wwpLeosCfmStatsRxTotalNotValidatedFrames
OBJECT-TYPE
The number of not validated frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.6Counter64read-onlycurrent
wwpLeosCfmStatsRxTotalInValidFrames
OBJECT-TYPE
The number of invalid frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.7Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidMessageOverflow
OBJECT-TYPE
The number of invalid message overflow frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.8Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidPortStatusTLV
OBJECT-TYPE
The number of invalid port status TLV received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.9Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidInterfaceStatusTLV
OBJECT-TYPE
The number of invalid interface status TLV received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.10Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidSenderIDTLV
OBJECT-TYPE
The number of invalid sender ID TLV received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.11Counter64read-onlycurrent
wwpLeosCfmRxAdminDisableDropped
OBJECT-TYPE
The number of frames dropped when in admin disable mode.
1.3.6.1.4.1.6141.2.60.35.1.1.25.12Counter64read-onlycurrent
wwpLesoCfmRxInvalidEtypeDropped
OBJECT-TYPE
The number of frames dropped when in admin disable mode.
1.3.6.1.4.1.6141.2.60.35.1.1.25.13Counter64read-onlycurrent
wwpLeosCfmRxInvalidOpCodeDropped
OBJECT-TYPE
The number of received Invalid Opcode frames dropped.
1.3.6.1.4.1.6141.2.60.35.1.1.25.14Counter64read-onlycurrent
wwpLeosCfmRxSTPStateNotForwardingDropped
OBJECT-TYPE
The number of frames dropped when system is not in STP forwarding mode.
1.3.6.1.4.1.6141.2.60.35.1.1.25.15Counter64read-onlycurrent
wwpLeosCfmGlobalStatsClear
OBJECT-TYPE
Setting this object to clear will clear statistics globally (Global Stats, Service Stats and Mep Stats). This object cannot be set to none.
1.3.6.1.4.1.6141.2.60.35.1.1.25.16INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmGlobalLoopbackMsgStatsClear
OBJECT-TYPE
Setting this object to clear will clear Loopback Statistics globally(Global stats, Service Stats and Mep Stats).
1.3.6.1.4.1.6141.2.60.35.1.1.25.17INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmGlobalLinkTraceMsgStatsClear
OBJECT-TYPE
Setting this object to clear will clear Link Trace Statistics globally(Global stats, Service Stats and Mep Stats).
1.3.6.1.4.1.6141.2.60.35.1.1.25.18INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmGlobalDelayMeasurementMsgStatsClear
OBJECT-TYPE
Setting this object to clear will clear Delay Measurement Statistics globally(Global stats, Service Stats and Mep Stats).
1.3.6.1.4.1.6141.2.60.35.1.1.25.19INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmGlobalLossMeasurementMsgStatsClear
OBJECT-TYPE
Setting this object to clear will clear Loss Measurement Statistics globally(Global stats, Service Stats and Mep Stats).
1.3.6.1.4.1.6141.2.60.35.1.1.25.20INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmTotalRxDropBlockedOppositeMep
OBJECT-TYPE
The number of received Blocked by Opposite Mep frames dropped.
1.3.6.1.4.1.6141.2.60.35.1.1.25.21Counter64read-onlycurrent
wwpLeosCfmGlobalCCMStats
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.25.26
wwpLeosCfmTotalTxCCM
OBJECT-TYPE
The total number of CCM frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.1Counter64read-onlycurrent
wwpLeosCfmTotalTxCCMFlooded
OBJECT-TYPE
The total number of flooded CCM frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.2Counter64read-onlycurrent
wwpLeosCfmTotalRxValidCCM
OBJECT-TYPE
The number of valid frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.3Counter64read-onlycurrent
wwpLeosCfmTotalRxCCMInSequence
OBJECT-TYPE
The number of CCM frames received in sequence.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.4Counter64read-onlycurrent
wwpLeosCfmTotalRxCCMSequenceError
OBJECT-TYPE
The number of errored CCM frames received in sequence.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.5Counter64read-onlycurrent
wwpLeosCfmTotalCCMRxMDLevelXcon
OBJECT-TYPE
The number of MD Level CFM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.6Counter64read-onlycurrent
wwpLeosCfmTotalCCMRxMAIDXcon
OBJECT-TYPE
The number of MAID Xcon CFM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.7Counter64read-onlycurrent
wwpLeosCfmTotalRxCCMErrorOnMepId
OBJECT-TYPE
The number of frames dropped when in admin disable mode.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.8Counter64read-onlycurrent
wwpLeosCfmTotalRxCCMIntervalError
OBJECT-TYPE
The number of interval error frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.9Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidCCM
OBJECT-TYPE
The number of invalid CCM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.26.10Counter64read-onlycurrent
wwpLeosCfmGlobalLoopbackStats
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.25.27
wwpLeosCfmTotalTxLBM
OBJECT-TYPE
The number of Loopback messages sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.1Counter64read-onlycurrent
wwpLeosCfmTotalTxLBR
OBJECT-TYPE
The total number of Loopback Replies frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.2Counter64read-onlycurrent
wwpLeosCfmTotalRxInOderLBR
OBJECT-TYPE
The total number of In order LBR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.3Counter64read-onlycurrent
wwpLeosCfmTotalRxOOOLBR
OBJECT-TYPE
The number of Out of Order LBR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.4Counter64read-onlycurrent
wwpLeosCfmTotalRxContentMismatchLBR
OBJECT-TYPE
The number of Content Mismatch LBR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.5Counter64read-onlycurrent
wwpLeosCfmTotalRxUnexpectedLBR
OBJECT-TYPE
The number of unexpected LBR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.6Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidLBR
OBJECT-TYPE
The number of invalid LBR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.7Counter64read-onlycurrent
wwpLeosCfmTotalRxvalidLBM
OBJECT-TYPE
The number of valid LBM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.8Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidLBM
OBJECT-TYPE
The number of invalid LBM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.27.9Counter64read-onlycurrent
wwpLeosCfmGlobalLinkTraceStats
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.25.28
wwpLeosCfmTotalTxLTM
OBJECT-TYPE
The number of LTM frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.1Counter64read-onlycurrent
wwpLeosCfmTotalTxLTR
OBJECT-TYPE
The total number of LTR frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.2Counter64read-onlycurrent
wwpLeosCfmTotalRxValidLTM
OBJECT-TYPE
The total number of LTM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.3Counter64read-onlycurrent
wwpLeosCfmTotalRxValidLTR
OBJECT-TYPE
The total number of Valid LTR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.4Counter64read-onlycurrent
wwpLeosCfmTotalRxUnexpectedLTR
OBJECT-TYPE
The total number of unexpected LTR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.5Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidLTR
OBJECT-TYPE
The total number of Invalid LTR frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.6Counter64read-onlycurrent
wwpLeosCfmInvalidLTRRelayAction
OBJECT-TYPE
The total number of Invalid LTR Action.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.7Counter64read-onlycurrent
wwpLeosCfmTotalRxInvalidLTM
OBJECT-TYPE
The total number of Invalid LTM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.8Counter64read-onlycurrent
wwpLeosCfmRxUnresolvedLTM
OBJECT-TYPE
The total number of Unresolved LTM frames received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.28.9Counter64read-onlycurrent
wwpLeosCfmGlobalDelayMeasurementStats
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.25.29
wwpLeosCfmTotalTxDMM
OBJECT-TYPE
The total number of Delay Measurements messages sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.1Counter64read-onlycurrent
wwpLeosCfmTotalTxDMR
OBJECT-TYPE
The total number of Delay Measurements Reply sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.2Counter64read-onlycurrent
wwpLeosCfmTotalRxDMM
OBJECT-TYPE
The total number of Delay Measurements Messages received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.3Counter64read-onlycurrent
wwpLeosCfmTotalRxDMR
OBJECT-TYPE
The total number of Delay Measurements Reply received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.29.4Counter64read-onlycurrent
wwpLeosCfmGlobalLossMeasurementStats
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.1.25.30
wwpLeosCfmTotalTxLMM
OBJECT-TYPE
The total number of Loss Measurements messages sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.1Counter64read-onlycurrent
wwpLeosCfmTotalTxLMR
OBJECT-TYPE
The total number of Loss Measurements Reply frames sent.
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.2Counter64read-onlycurrent
wwpLeosCfmTotalRxLMM
OBJECT-TYPE
The total number of LMM received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.3Counter64read-onlycurrent
wwpLeosCfmTotalRxLMR
OBJECT-TYPE
The total number of LMR received.
1.3.6.1.4.1.6141.2.60.35.1.1.25.30.4Counter64read-onlycurrent
wwpLeosCfmService
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.2
wwpLeosCfmServiceTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM Service Table. To create an entry in this table the following criteria must be followed: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. wwpLeosCfmServiceName must be specified. wwpLeosCfmServiceStatus must be set to createAndGo.
1.3.6.1.4.1.6141.2.60.35.1.2.1not-accessiblecurrent
wwpLeosCfmServiceEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmServiceTable.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1not-accessiblecurrent
wwpLeosCfmServiceIndex
OBJECT-TYPE
A unique identifier for CFM service entry.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.1Unsigned32 (1..65535)read-createcurrent
wwpLeosCfmServiceType
OBJECT-TYPE
This object is used to specify the service type. Interpretation of wwpLeosCfmServiceValue depends on the value of this MIB object. This MIB object along with wwpLeosCfmServiceValue must be unique for each entry in this table
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.2INTEGER {mplsVs(1), ethVs(2), vlan(3), pbtTunnel(4), vs(5), other(9)}read-createcurrent
wwpLeosCfmServiceValue
OBJECT-TYPE
This object is used to specify the service value. Interpretation of this object depends on the value of wwpLeosCfmServiceType. This MIB object along with wwpLeosCfmServiceType must be unique for each entry in this table
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.3INTEGER (1..65535)read-createcurrent
wwpLeosCfmServiceAdminState
OBJECT-TYPE
This object specifies the admin state of CFM for this service type.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.4INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmServiceOperState
OBJECT-TYPE
The operational state of CFM for this service type.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.5INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosCfmServiceAlarmTime
OBJECT-TYPE
This MIB object allows to set the time interval that a service fault detected by wwpLeosCfmServiceType must be present prior to triggering a fault alarm.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.6INTEGER (1..60000)read-writecurrent
wwpLeosCfmServiceCCMInterval
OBJECT-TYPE
This MIB object allows to set the CCM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially with the index value. Setting the interval to 0 disables CCM transmission from all MEPs in the MA.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.7INTEGER (0..7)read-writecurrent
wwpLeosCfmServiceName
OBJECT-TYPE
This MIB object allows to set the CFM service name.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.9DisplayString (SIZE(1..31))read-createcurrent
wwpLeosCfmServiceMdLevel
OBJECT-TYPE
This MIB object sets the CFM service level which associates it with a Maintenance Domain.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.10INTEGER (0..7)read-createcurrent
wwpLeosCfmServiceResetTime
OBJECT-TYPE
This MIB object set the time interval during which no service faults can be detected before the service will reset a fault alarm.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.11INTEGER (10..36000)read-writecurrent
wwpLeosCfmServiceLastFaultCCM
OBJECT-TYPE
This MIB object shows last received CCM fault.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.12CfmDisplayStringread-onlycurrent
wwpLeosCfmServiceRMEPFailureFlag
OBJECT-TYPE
This MIB object shows the RMEP failure flag.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13TruthValueread-onlycurrent
wwpLeosCfmServiceCCMErrorFlag
OBJECT-TYPE
This MIB object shows the CCM Error flag.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.14TruthValueread-onlycurrent
wwpLeosCfmServiceCrossConnectErrorFlag
OBJECT-TYPE
This MIB object shows the cross-connect Error flag.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.15TruthValueread-onlycurrent
wwpLeosCfmServiceNumMEP
OBJECT-TYPE
This MIB object shows Number of MEPs.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16Counter32read-onlycurrent
wwpLeosCfmServiceNumRemoteMEP
OBJECT-TYPE
This MIB object shows the Number of Remote MEPs.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17Counter32read-onlycurrent
wwpLeosCfmServiceNumActiveMEP
OBJECT-TYPE
This MIB object shows the Number of active MEPs.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18Counter32read-onlycurrent
wwpLeosCfmServiceStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this object to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.19RowStatusread-createcurrent
wwpLeosCfmServiceNextMepId
OBJECT-TYPE
This mib object specifies the next MEP Id for given service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.20Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmServiceAlarmPriority
OBJECT-TYPE
This mib object specifies the alarm priority for given service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.21Unsigned32 (1..5)read-writecurrent
wwpLeosCfmServiceNumCCMForFault
OBJECT-TYPE
The number of CCM frames that must go undelivered for the service to be declared as operationally down.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.22Unsigned32 (1..255)read-writecurrent
wwpLeosCfmServiceDMMInterval
OBJECT-TYPE
This MIB object allows to set the DMM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially with the index value.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.23INTEGER (1..7)read-writecurrent
wwpLeosCfmServiceLMMInterval
OBJECT-TYPE
This MIB object allows to set the LMM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially with the index value.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.24INTEGER (1..7)read-writecurrent
wwpLeosCfmServiceCCMLossStatsState
OBJECT-TYPE
This object specifies the operational state of CCM loss accounting for RMEPs learned by this service type.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.25INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmServiceCCMLossBucketInterval
OBJECT-TYPE
This object specifies the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default history covers 24 hours.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.26INTEGER (1..60)read-writecurrent
wwpLeosCfmServiceRemoteMepDiscovery
OBJECT-TYPE
This object specifies whether remote meps should be discovered automatically. if this object is set to enable it will cause remote meps to be discovered automatically and if set to disable will not discover rempote meps.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.27INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmServiceY1731
OBJECT-TYPE
Specifies if y1731 is enabled for the service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.28TruthValueread-writecurrent
wwpLeosCfmServiceAccelerated
OBJECT-TYPE
Specifies if the service is supported in hardware .
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.49TruthValueread-createcurrent
wwpLeosCfmServiceTlvSenderIdType
OBJECT-TYPE
This mib object specifies the Sender Id Tlv Type.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.50INTEGER {none(1), chassis(2), manage(3), chassisManage(4)}read-createcurrent
wwpLeosCfmServiceRMEPHoldTime
OBJECT-TYPE
This mib object specifies the Remote MEP hold time in milliseconds.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.51Unsigned32 (0..3600000)read-createcurrent
wwpLeosCfmServiceCCMTxState
OBJECT-TYPE
This mib object specifies the admin state of the CCM Tx.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.52INTEGER {disabled(1), enabled(2)}read-createcurrent
wwpLeosCfmServicePortStatusFlag
OBJECT-TYPE
This mib object shows the Port Status defect flag.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.53TruthValueread-onlycurrent
wwpLeosCfmServiceRDIFlag
OBJECT-TYPE
This mib object shows the RDI defect flag.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.54TruthValueread-onlycurrent
wwpLeosCfmServiceInstabilityFlag
OBJECT-TYPE
This mib object shows the Instability defect flag.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.55TruthValueread-onlycurrent
wwpLeosCfmServiceRMEPAging
OBJECT-TYPE
Controls automatic Remote MEP aging for the service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.56TruthValueread-createcurrent
wwpLeosCfmServiceDefaultMEPType
OBJECT-TYPE
This object is used to specify the type of all MEP's created for the service. Services of type PBT must specify a MEP type of 'down'.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.57INTEGER {up(1), down(2)}read-createdeprecated
wwpLeosCfmServiceMAID
OBJECT-TYPE
The MAID send by CCM's associated with the service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.58CfmMAIDread-onlydeprecated
wwpLeosCfmServiceMdIndex
OBJECT-TYPE
The unique index in the Maint Domain table.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.59Unsigned32read-writedeprecated
wwpLeosCfmServiceMaintAssocNameType
OBJECT-TYPE
The type (and thereby format) of the Maintenance Association Name.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.60Dot1agCfmMaintAssocNameTyperead-writedeprecated
wwpLeosCfmServiceMaintAssocName
OBJECT-TYPE
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.61Dot1agCfmMaintAssocNameread-writedeprecated
wwpLeosCfmServiceMulticastDa
OBJECT-TYPE
Specifies if multicast DA mode is enabled for the service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.65TruthValueread-writecurrent
wwpLeosCfmServiceChargedAgainstGlobalFrameBudget
OBJECT-TYPE
This MIB object reflects if this service is charged against the global frame budget.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.71TruthValueread-onlycurrent
wwpLeosCfmServiceCfmDefaultMEPType
OBJECT-TYPE
This object is used to specify the type of all MEP's created for the service. Services of type PBT must specify a MEP type of 'down'.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.72INTEGER {up(1), down(2)}read-createcurrent
wwpLeosCfmServiceCfmMAID
OBJECT-TYPE
The MAID send by CCM's associated with the service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.73CfmMAIDread-onlycurrent
wwpLeosCfmServiceCfmMdIndex
OBJECT-TYPE
The unique index in the Maint Domain table.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.74Unsigned32read-writecurrent
wwpLeosCfmServiceCfmMaintAssocNameType
OBJECT-TYPE
The type (and thereby format) of the Maintenance Association Name.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.75Dot1agCfmMaintAssocNameTyperead-writecurrent
wwpLeosCfmServiceCfmMaintAssocName
OBJECT-TYPE
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.76Dot1agCfmMaintAssocNameread-writecurrent
wwpLeosCfmServiceCfmControlModuleFrameBudget
OBJECT-TYPE
Cfm Frame budget for control module for the given service.
1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77Counter32read-onlycurrent
wwpLeosCfmServiceFaultTable
OBJECT-TYPE
The (conceptual) table used for Fault Traps. The last CFM error that occurred is reported.
1.3.6.1.4.1.6141.2.60.35.1.2.2not-accessiblecurrent
wwpLeosCfmServiceFaultEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmServiceFaultTable.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1not-accessiblecurrent
wwpLeosCfmServiceFaultTime
OBJECT-TYPE
This object is used to specify the Time at which the fault occurred.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.1TimeTicksread-onlycurrent
wwpLeosCfmServiceFaultType
OBJECT-TYPE
This object is used to specify the type of fault.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.2INTEGER {none(1), someRDIDefect(2), someMACStatusDefect(3), someRMEPCCMDefect(4), errorCCMDefect(5), xconCCMDefect(6), instability(7)}read-onlycurrent
wwpLeosCfmServiceFaultDesc
OBJECT-TYPE
This object is used to specify the description of the fault.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.3DisplayStringread-onlycurrent
wwpLeosCfmServiceFaultMep
OBJECT-TYPE
This object is used to specify the Mepid of MEP reporting the fault.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.4INTEGER (1..8191)read-onlycurrent
wwpLeosCfmServiceVlan
OBJECT-TYPE
This object is used to specify the service VLAN.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.5INTEGER (1..65535)read-onlycurrent
wwpLeosCfmServiceVsPbtName
OBJECT-TYPE
This object represents the virtual switch or Pbt tunnel assigned to the given service.
1.3.6.1.4.1.6141.2.60.35.1.2.2.1.50DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmServiceStatisticsTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM Service Table. To create an entry in this table, the following criteria must be met: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. wwpLeosCfmServiceName must be specified. wwpLeosCfmServiceStatus must be set to createAndGo.
1.3.6.1.4.1.6141.2.60.35.1.2.3not-accessiblecurrent
wwpLeosCfmServiceStatisticsEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmServiceTable.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1not-accessiblecurrent
wwpLeosCfmServiceRxTotalValidFrames
OBJECT-TYPE
The total valid Frames received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1Counter64read-onlycurrent
wwpLeosCfmServiceRxTotalInvalidFrames
OBJECT-TYPE
The total invalid Frames received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2Counter64read-onlycurrent
wwpLeosCfmServiceInvalidMessageOverflow
OBJECT-TYPE
The total invalid message overflow Frames.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3Counter64read-onlycurrent
wwpLeosCfmServiceInvalidPortStatusTLV
OBJECT-TYPE
The total invalid Port Status TLVs Frames.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4Counter64read-onlycurrent
wwpLeosCfmServiceInvalidInterfaceStatusTLV
OBJECT-TYPE
The invalid interface Status TLVs Frames.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5Counter64read-onlycurrent
wwpLeosCfmServiceInvalidSenderIDTLV
OBJECT-TYPE
The invalid SenderId TLV.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6Counter64read-onlycurrent
wwpLeosCfmServiceTxTotalCCM
OBJECT-TYPE
The total CCM sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxValidCCM
OBJECT-TYPE
The total valid CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInSequenceCCM
OBJECT-TYPE
The total CCM in sequence received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxNotInSequenceCCM
OBJECT-TYPE
The total CCM not in sequence received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxMDLevelXconCCM
OBJECT-TYPE
The total MD Level Xcon CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxMAIDXconCCM
OBJECT-TYPE
The total MAID Xcon CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxMEPIDErrorCCM
OBJECT-TYPE
The total MEPID Error CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM
OBJECT-TYPE
The total Interval Error CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInvalidCCM
OBJECT-TYPE
The total Internal Error CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxLTM
OBJECT-TYPE
The total Internal Error CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxLTR
OBJECT-TYPE
The total Internal Error CCM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxValidLTR
OBJECT-TYPE
The valid LTR Received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxUnexpectedLTR
OBJECT-TYPE
The unexpected LTR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInvalidLTR
OBJECT-TYPE
This object specifies invalid LTR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInvalidRelayActionLTR
OBJECT-TYPE
The total invalid relay action LTR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxValidLTM
OBJECT-TYPE
The valid LTM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxInvalidLTM
OBJECT-TYPE
The total invalid LTM sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxLBM
OBJECT-TYPE
The total LBM sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxLBR
OBJECT-TYPE
The total LBR sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInorderLBR
OBJECT-TYPE
The total in order LBR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxOutOfOrderLBR
OBJECT-TYPE
The toal out of order LBR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxContentMismatchLBR
OBJECT-TYPE
The total content mismatch LBR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxUnexpectedLBR
OBJECT-TYPE
The total unexpected LBR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInvalidLBR
OBJECT-TYPE
The invalid LBR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxValidLBM
OBJECT-TYPE
The valid LBM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxInvalidLBM
OBJECT-TYPE
The total invalid LBM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxDMM
OBJECT-TYPE
The total DMM sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxDMR
OBJECT-TYPE
The total DMR sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxDMM
OBJECT-TYPE
The total DMM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxDMR
OBJECT-TYPE
The total DMR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxLMM
OBJECT-TYPE
The total LMM sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37Counter64read-onlycurrent
wwpLeosCfmServiceTotalTxLMR
OBJECT-TYPE
The total LMR sent.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxLMM
OBJECT-TYPE
The total LMM received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39Counter64read-onlycurrent
wwpLeosCfmServiceTotalRxLMR
OBJECT-TYPE
The total LMR received.
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40Counter64read-onlycurrent
wwpLeosCfmServiceStatsClear
OBJECT-TYPE
Setting this object to clear will clear statististics for the given service index. This object can't be set to none
1.3.6.1.4.1.6141.2.60.35.1.2.3.1.41INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmServiceClearStats
OBJECT-TYPE
Setting this object to clear(1) will clear all service level statistics for all services in addition within each mep.
1.3.6.1.4.1.6141.2.60.35.1.2.4INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmMIP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.3
wwpLeosCfmMipTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error.
1.3.6.1.4.1.6141.2.60.35.1.3.1not-accessiblecurrent
wwpLeosCfmMipEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMipTable.
1.3.6.1.4.1.6141.2.60.35.1.3.1.1not-accessiblecurrent
wwpLeosCfmMipVid
OBJECT-TYPE
This object is used as index in the table and is used to specify the VLAN service type for which intermediate maintenance points can be created.
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.1INTEGER (0..24576)read-onlycurrent
wwpLeosCfmMipPort
OBJECT-TYPE
This object is used as index in the table and is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.2INTEGER (1..65535)read-onlycurrent
wwpLeosCfmMipLevel
OBJECT-TYPE
This object is used to specify the level attribute.
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.3INTEGER (0..7)read-createcurrent
wwpLeosCfmMipStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.3.1.1.4RowStatusread-createcurrent
wwpLeosCfmLinkTrace
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.4
wwpLeosCfmLinkTraceMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the LinkTraceMsg. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.4.1not-accessiblecurrent
wwpLeosCfmLinkTraceMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1not-accessiblecurrent
wwpLeosCfmLinkTraceMsgPortId
OBJECT-TYPE
This object is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.1INTEGER (1..65535)not-accessiblecurrent
wwpLeosCfmLinkTraceMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the target MEPID. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.2INTEGER (1..8191)read-createcurrent
wwpLeosCfmLinkTraceMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the target MacAddress to be used when sending link LinkMsg. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.3MacAddressread-createcurrent
wwpLeosCfmLinkTraceMsgTTL
OBJECT-TYPE
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.4INTEGER (1..255)read-createcurrent
wwpLeosCfmLinkTraceMsgSequenceNumber
OBJECT-TYPE
This object is used to specify the sequence number in the linkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.5Integer32read-onlycurrent
wwpLeosCfmLinkTraceMsgRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.6RowStatusread-createcurrent
wwpLeosCfmLinkTraceMsgPriority
OBJECT-TYPE
This object is used to specify the priority to be used when sending LinkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.7INTEGER (0..7)read-createcurrent
wwpLeosCfmLinkTraceMsgServiceName
OBJECT-TYPE
This object is used to specify the service to be used when sending LinkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.50DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosCfmLinkTraceMsgSubPortName
OBJECT-TYPE
This object represents the sub-port name where the LinkTraceMsg was sent.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.52DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmLinkTraceMsgVsIndex
OBJECT-TYPE
This object represents the virtual switch where the LinkTraceMsg was sent.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.53Unsigned32read-onlycurrent
wwpLeosCfmLinkTraceMsgTotalTxLtm
OBJECT-TYPE
This object represents the total LinkTraceMsg were sent.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.54Unsigned32read-onlycurrent
wwpLeosCfmLinkTraceMsgTotalRxLtr
OBJECT-TYPE
This object represents the total LinkTraceMsg were received from the LinkTraceResponse.
1.3.6.1.4.1.6141.2.60.35.1.4.1.1.55Unsigned32read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the LinkTrace Msg Reply.
1.3.6.1.4.1.6141.2.60.35.1.4.2not-accessiblecurrent
wwpLeosCfmLinkTraceMsgReplyEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgReplyTable.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1not-accessiblecurrent
wwpLeosCfmLinkTraceMsgReplyTTL
OBJECT-TYPE
This object is used to specify the ttl of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.1Integer32 (0..255)read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyTTLIndex
OBJECT-TYPE
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.2Unsigned32 (1..24576)read-onlycurrent
wwpLeosCfmLinkTraceMsgReplySequenceNumber
OBJECT-TYPE
This object is used to specify the sequence number of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.3Integer32read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyMPMacAddr
OBJECT-TYPE
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.4MacAddressread-onlycurrent
wwpLeosCfmLinkTraceMsgReplyMEPID
OBJECT-TYPE
This object is used to specify the MEP ID of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.5Integer32read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyTargetMacAddr
OBJECT-TYPE
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.6MacAddressread-onlycurrent
wwpLeosCfmLinkTraceMsgReplyRelayAction
OBJECT-TYPE
This object is used to specify the message reply relay action.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.7INTEGER {invalid(1), unknown(2), fdb(3), mpdb(4), noLearn(5), hit(6)}read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyIngressPort
OBJECT-TYPE
This object is used to specify the message reply ingress port.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.8INTEGER (1..65535)read-onlyobsolete
wwpLeosCfmLinkTraceMsgReplyIngressAction
OBJECT-TYPE
This object is used to specify the message reply ingress action.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.9INTEGER {ok(1), blocked(2), vid(3), down(4), none(5)}read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyEgressPort
OBJECT-TYPE
This object is used to specify the message reply egress port.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.10INTEGER (1..65535)read-onlyobsolete
wwpLeosCfmLinkTraceMsgReplyEgressAction
OBJECT-TYPE
This object is used to specify the message reply egress action.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.11INTEGER {none(1), ttl(2), down(3), blocked(4), vid(5), ok(6)}read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyIngressPortStr
OBJECT-TYPE
This mib object is used to specify the message reply ingress port.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.12DisplayString (SIZE(1..8))read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyEgressPortStr
OBJECT-TYPE
This mib object is used to specify the message reply egress port.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.13DisplayString (SIZE(1..8))read-onlycurrent
wwpLeosCfmLinkTraceMsgReplyIngressMacAddr
OBJECT-TYPE
This object is used to specify the message reply ingress mac address.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.50MacAddressread-onlycurrent
wwpLeosCfmLinkTraceMsgReplyEgressMacAddr
OBJECT-TYPE
This object is used to specify the message reply egress mac address.
1.3.6.1.4.1.6141.2.60.35.1.4.2.1.51MacAddressread-onlycurrent
wwpLeosCfmLoopback
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.5
wwpLeosCfmLoopbackMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.5.1not-accessiblecurrent
wwpLeosCfmLoopbackMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmLoopbackMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1not-accessiblecurrent
wwpLeosCfmLoopbackMsgPortId
OBJECT-TYPE
This object is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosCfmLoopbackMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmLoopbackMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmLoopbackMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.3MacAddressread-createcurrent
wwpLeosCfmLoopbackMsgCount
OBJECT-TYPE
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.4INTEGER (1..20)read-createcurrent
wwpLeosCfmLoopbackMsgData
OBJECT-TYPE
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.5DisplayString (SIZE(1..127))read-createcurrent
wwpLeosCfmLoopbackMsgPriority
OBJECT-TYPE
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.6INTEGER (0..7)read-createcurrent
wwpLeosCfmLoopbackMsgRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.7RowStatusread-createcurrent
wwpLeosCfmLoopbackMsgDefaultInterval
OBJECT-TYPE
The global default LoopbackMsg interval to be used when sending link LoopbackMsg
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.8INTEGER (10..60000)read-createcurrent
wwpLeosCfmLoopbackMsgDefaultTimeout
OBJECT-TYPE
The global default LoopbackMsg timeout to be used when sending link LoopbackMsg
1.3.6.1.4.1.6141.2.60.35.1.5.1.1.9INTEGER (2000..10000)read-createcurrent
wwpLeosCfmMaintenance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.6
wwpLeosCfmMaintenanceDomainTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM Maintenance Domain Table.
1.3.6.1.4.1.6141.2.60.35.1.6.1not-accessiblecurrent
wwpLeosCfmMaintenanceDomainEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMaintenanceDomainTable.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1not-accessiblecurrent
wwpLeosCfmMaintenanceDomainIndex
OBJECT-TYPE
This object specfies the unique index in the table.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.1Unsigned32read-onlycurrent
wwpLeosCfmMaintenanceDomainLevel
OBJECT-TYPE
This object specfies the domain level.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.2INTEGER (0..7)read-writecurrent
wwpLeosCfmMaintenanceDomainName
OBJECT-TYPE
The domain name which can be modified.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.3DisplayString (SIZE(1..31))read-writecurrent
wwpLeosCfmMaintenanceDomainServiceCount
OBJECT-TYPE
This object specfies number of cfm services mapped to this domain.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.4Unsigned32read-onlycurrent
wwpLeosCfmMaintenanceDomainMdFormat
OBJECT-TYPE
The type (and thereby format) of the Maintenance Domain Name.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.5Dot1agCfmMaintDomainNameTyperead-writecurrent
wwpLeosCfmMaintenanceDomainMdName
OBJECT-TYPE
The Maintenance Domain name. The type/format of this object is determined by the value of the wwpLeosCfmMaintenanceDomainMdFormat object.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.6Dot1agCfmMaintDomainNameread-writecurrent
wwpLeosCfmMaintenanceDomainStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo' and specify, at a minimum, the wwpLeosCfmMaintenanceDomainLevel and wwpLeosCfmMaintenanceDomainName objects. During a create/set operation, if a non-default MdFormat is required, both the wwpLeosCfmMaintenanceDomainMdFormat and wwpLeosCfmMaintenanceDomainMdName objects must also be specified. To delete a row in this table, set this object to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.6.1.1.7RowStatusread-createcurrent
wwpLeosCfmMEP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.7
wwpLeosCfmMEPTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM MEP table.
1.3.6.1.4.1.6141.2.60.35.1.7.1not-accessiblecurrent
wwpLeosCfmMEPEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMEPTable.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1not-accessiblecurrent
wwpLeosCfmMEPPort
OBJECT-TYPE
This object is used as index in the table and is used to specify the port id.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosCfmMEPAdminState
OBJECT-TYPE
This object is used to specify the admin state of CFM MEP.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmMEPOperState
OBJECT-TYPE
This object is obsolete and should not be used.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3INTEGER {disabled(1), enabled(2)}read-onlyobsolete
wwpLeosCfmMEPDirection
OBJECT-TYPE
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4INTEGER {up(1), down(2)}read-createcurrent
wwpLeosCfmMEPCCMState
OBJECT-TYPE
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5INTEGER {on(1), off(2)}read-writecurrent
wwpLeosCfmMEPCCMPriority
OBJECT-TYPE
This object specified the priority of CCM messages transmitted.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6INTEGER (0..7)read-writecurrent
wwpLeosCfmMEPLTMPriority
OBJECT-TYPE
This object specifies the priority received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7INTEGER (0..7)read-writeobsolete
wwpLeosCfmMEPId
OBJECT-TYPE
This object specifies the mep id for the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmMEPMacAddr
OBJECT-TYPE
This object specifies the mac address received on the given service and port..
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9MacAddressread-onlycurrent
wwpLeosCfmMEPNextLbmSeqNumber
OBJECT-TYPE
This object specifies the next lbm sequence number received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10Counter32read-onlycurrent
wwpLeosCfmMEPRxValidInOrderLoopbackReply
OBJECT-TYPE
The total valid in order loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11Counter32read-onlycurrent
wwpLeosCfmMEPRxValidOutOrderLoopbackReply
OBJECT-TYPE
This object specifies the total valid out of order loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12Counter32read-onlycurrent
wwpLeosCfmMEPNextLTMSeqNumber
OBJECT-TYPE
This object specifies the next LTM serquence number received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13Counter32read-onlycurrent
wwpLeosCfmMEPNumLoopbackRepliesTxmt
OBJECT-TYPE
This object specifies the flags total loopback replies transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14Counter32read-onlycurrent
wwpLeosCfmMEPNumLTMReceived
OBJECT-TYPE
This object specifies the total LTM messages received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15Counter32read-onlycurrent
wwpLeosCfmMEPNumLTMTxmt
OBJECT-TYPE
The total LTM transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16Counter32read-onlycurrent
wwpLeosCfmMEPNumCCMTxmt
OBJECT-TYPE
This object specifies the total CCM messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17Counter32read-onlycurrent
wwpLeosCfmMEPRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18RowStatusread-createcurrent
wwpLeosCfmMEPNumDMMSent
OBJECT-TYPE
This object specifies the total delay measurement messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19Counter32read-onlycurrent
wwpLeosCfmMEPDMMDelay
OBJECT-TYPE
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20Counter32read-onlycurrent
wwpLeosCfmMEPDMMJitter
OBJECT-TYPE
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21Counter32read-onlycurrent
wwpLeosCfmMEPNumLMMSent
OBJECT-TYPE
The total frame loss measurement messages transmitted during the last test performed on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22Counter32read-onlycurrent
wwpLeosCfmMEPLMMFrameLossNear
OBJECT-TYPE
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23Counter32read-onlycurrent
wwpLeosCfmMEPLMMFrameLossFar
OBJECT-TYPE
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24Counter32read-onlycurrent
wwpLeosCfmMEPNumLMRReceived
OBJECT-TYPE
This object specifies the total number of frame loss measurement replies received during the last test performed on the given service and port. If this count is zero, the near and far frame loss counts are probably invalid as connectivity to the device being tested was not available.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25Counter32read-onlycurrent
wwpLeosCfmMEPNumDMRReceived
OBJECT-TYPE
This object specifies the total number of delay measurement replies received during the last test performed on the given service and port. If this count is not equal to the number of delay measurement frames sent, the jitter and delay are probably invalid as connectivity to the device being tested was not stable.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26Counter32read-onlycurrent
wwpLeosCfmMEPDMMMinDelay
OBJECT-TYPE
The minimum delay in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27Counter32read-onlycurrent
wwpLeosCfmMEPDMMMaxDelay
OBJECT-TYPE
The maximum delay in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28Counter32read-onlycurrent
wwpLeosCfmMEPDMMMinJitter
OBJECT-TYPE
The minimum jitter in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29Counter32read-onlycurrent
wwpLeosCfmMEPDMMMaxJitter
OBJECT-TYPE
The maximum jitter in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30Counter32read-onlycurrent
wwpLeosCfmMEPServiceName
OBJECT-TYPE
This object is used to specify the service name assigned to this port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmMEPSubPortName
OBJECT-TYPE
This object represents the sub-port name assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmMEPVsPbtName
OBJECT-TYPE
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmMEPLogicalPortName
OBJECT-TYPE
This object represents the logical port name assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmMEPSubPortIndex
OBJECT-TYPE
This object is used to specify the CFM sub-port index.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54Unsigned32read-onlycurrent
wwpLeosCfmMEPEncapsulation
OBJECT-TYPE
This object is used to specify the encapsulation applied to the service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55INTEGER {ieee802dot1d(1), pbtCfmEncap(2)}read-onlycurrent
wwpLeosCfmMEPLeadPortBayIndex
OBJECT-TYPE
This object is used as to specify the agent bay that MEP is in.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56Unsigned32 (1)read-onlycurrent
wwpLeosCfmMEPLeadPortShelfIndex
OBJECT-TYPE
This object is used as to specify the agent shelf that MEP is in.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57Unsigned32 (1)read-onlycurrent
wwpLeosCfmMEPLeadPortModuleIndex
OBJECT-TYPE
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58Unsigned32 (1..7 | 255)read-onlycurrent
wwpLeosCfmMEPPBTBvid
OBJECT-TYPE
This object specifies the BVID assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59Unsigned32 (1..8191)read-onlycurrent
wwpLeosCfmMEPPBTEtype
OBJECT-TYPE
This object specifies the E-type assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60Unsigned32 (1..8191)read-onlycurrent
wwpLeosCfmMEPNumLbmTxmt
OBJECT-TYPE
This object specifies the total loopback messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61Counter32read-onlycurrent
wwpLeosCfmMEPNumLbmReceived
OBJECT-TYPE
This object specifies the total loopback messages received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62Counter32read-onlycurrent
wwpLeosCfmMEPNumLoopbackRepliesReceived
OBJECT-TYPE
This object specifies the total loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63Counter32read-onlycurrent
wwpLeosCfmMEPNumLTRepliesTxmt
OBJECT-TYPE
This object specifies the total link trace replies transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64Counter32read-onlycurrent
wwpLeosCfmMEPNumLTRepliesReceived
OBJECT-TYPE
This object specifies the total link trace replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65Counter32read-onlycurrent
wwpLeosCfmMEPNumUnexpectedLTRepliesReceived
OBJECT-TYPE
This object specifies the total unexpected link trace replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66Counter32read-onlycurrent
wwpLeosCfmMEPNumCCMReceived
OBJECT-TYPE
This object specifies the total CCM messages received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67Counter32read-onlycurrent
wwpLeosCfmRemoteMEP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.8
wwpLeosCfmRemoteMEPTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the Remote MEP table.
1.3.6.1.4.1.6141.2.60.35.1.8.1not-accessiblecurrent
wwpLeosCfmRemoteMEPEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmRemoteMEPTable.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1not-accessiblecurrent
wwpLeosCfmRemoteMEPID
OBJECT-TYPE
This object is used as index in the table and is used to specify the MEPID.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1Unsigned32 (1..100)read-onlycurrent
wwpLeosCfmRemoteMEPAdminState
OBJECT-TYPE
The administrative state of the Remote MEP State Machine.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmRemoteMEPOperState
OBJECT-TYPE
The operational state of the Remote MEP State Machine. disabled represents that remote mep is admin disabled. enabled represents that remote mep is operationally enabled hold represents that remote mep is admin enabled but currently in operational hold state holdLocked represents that remote mep is locked in hold state.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3INTEGER {disabled(1), enabled(2), hold(3), holdLocked(4)}read-onlycurrent
wwpLeosCfmRemoteMEPTime
OBJECT-TYPE
This object is used to specify the time at which the Remote MEP State Machine last entered RMEP_FAILED or RMEP_OK states.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4TimeTicksread-onlycurrent
wwpLeosCfmRemoteMEPMacAddr
OBJECT-TYPE
This object is used to specify the MAC address of the remote MEP.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5MacAddressread-createcurrent
wwpLeosCfmRemoteMEPKLastMacStatus
OBJECT-TYPE
This object is used to specify the last MAC status received.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6TruthValueread-onlycurrent
wwpLeosCfmRemoteMEPFailureFlag
OBJECT-TYPE
This object is used to specify the Remote MEP failure flag.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7TruthValueread-onlycurrent
wwpLeosCfmRemoteMEPCCMErrorFlag
OBJECT-TYPE
This object is used to specify the MEP CCM error flag.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8TruthValueread-onlycurrent
wwpLeosCfmRemoteMEPRDIErrorFlag
OBJECT-TYPE
This object is used to specify the MEP RDI error flag.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9TruthValueread-onlycurrent
wwpLeosCfmRemoteMEPNumCCMRx
OBJECT-TYPE
This object is used to show the number of MEP CCM frames received.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10Counter32read-onlycurrent
wwpLeosCfmRemoteMEPNumDMMSent
OBJECT-TYPE
The number of DMM frames sent.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11Counter32read-onlycurrent
wwpLeosCfmRemoteMEPDelay
OBJECT-TYPE
This object is used to show the average Delay in microseconds during the last Delay Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12Counter32read-onlycurrent
wwpLeosCfmRemoteMEPJitter
OBJECT-TYPE
This object is used to show the average Jitter in microseconds during the last Delay Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13Counter32read-onlycurrent
wwpLeosCfmRemoteMEPNumLMMSent
OBJECT-TYPE
This object is used to show the number of LMM frames sent.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14Counter32read-onlycurrent
wwpLeosCfmRemoteMEPFrameLossNear
OBJECT-TYPE
This object is used to show the near side Frame Loss during the last Frame Loss Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15Counter32read-onlycurrent
wwpLeosCfmRemoteMEPFrameLossFar
OBJECT-TYPE
This object is used to show the far side Frame Loss during the last Frame Loss Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16Counter32read-onlycurrent
wwpLeosCfmRemoteMEPNumLMRReceived
OBJECT-TYPE
This object is used to show the number of LMR frames received.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17Counter32read-onlycurrent
wwpLeosCfmRemoteMEPNumCCMLost
OBJECT-TYPE
This object is used to show the number of MEP CCM frames lost, as calculated by watching for CCM sequence errors.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18Counter32read-onlycurrent
wwpLeosCfmRemoteMEPNumDMRReceived
OBJECT-TYPE
This object is used to show the number of DMR frames received.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19Counter32read-onlycurrent
wwpLeosCfmRemoteMEPHoldState
OBJECT-TYPE
This object is used to set the remote MEP Hold State
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20INTEGER {disabled(1), enabled(2), locked(3)}read-createdeprecated
wwpLeosCfmRemoteMEPRowStatus
OBJECT-TYPE
This object is used to create entries in remote mep table
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21RowStatusread-createcurrent
wwpLeosCfmRemoteMEPCCMComment
OBJECT-TYPE
This mib object contains the CCM Comment, if available, that was sent by the remote Ciena device.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22DisplayString (SIZE(1..32))read-onlycurrent
wwpLeosCfmRemoteMEPBadSequence
OBJECT-TYPE
This mib object contains the number of LMR frames received with bad sequence number, for a given service and remote mep.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23Counter32read-onlycurrent
wwpLeosCfmRemoteMEPMinDelay
OBJECT-TYPE
The minimum Delay in microseconds during the last Delay Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24Counter32read-onlycurrent
wwpLeosCfmRemoteMEPMaxDelay
OBJECT-TYPE
The maximum Delay in microseconds during the last Delay Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25Counter32read-onlycurrent
wwpLeosCfmRemoteMEPMinJitter
OBJECT-TYPE
The minimum jitter in microseconds during the last Delay Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26Counter32read-onlycurrent
wwpLeosCfmRemoteMEPMaxJitter
OBJECT-TYPE
The maximum jitter in microseconds during the last Delay Measurement test.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27Counter32read-onlycurrent
wwpLeosCfmRemoteCfmMEPHoldState
OBJECT-TYPE
Hold-state for the remote-mep entry.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28INTEGER {disable(1), enable(2), lock(3)}read-createcurrent
wwpLeosCfmRemoteMEPServiceClear
OBJECT-TYPE
Setting this object to true causes the remote MEP for this service to be re-initialized .
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29TruthValueread-createcurrent
wwpLeosCfmRemoteMEPServiceStatisticsClear
OBJECT-TYPE
Setting this object to true resets the statistics for the remote MEP for this service.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30TruthValueread-createcurrent
wwpLeosCfmRemoteMEPAccelerated
OBJECT-TYPE
Specifies if the remote-mep is monitored in the hardware.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49TruthValueread-onlycurrent
wwpLeosCfmRemoteMEPSubPortName
OBJECT-TYPE
The object indicates the unique index for the module.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmRemoteMEPServiceName
OBJECT-TYPE
This object is used to specify the Service name.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmRemoteMEPBayIndex
OBJECT-TYPE
This object is used as to specify the agent bay that MEP is in.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52Unsigned32 (1)read-onlycurrent
wwpLeosCfmRemoteMEPShelfIndex
OBJECT-TYPE
This object is used as to specify the agent shelf that MEP is in.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53Unsigned32 (1)read-onlycurrent
wwpLeosCfmRemoteMEPModuleIndex
OBJECT-TYPE
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54Unsigned32 (1..7 | 255)read-onlycurrent
wwpLeosCfmRemoteMEPPreviousBayIndex
OBJECT-TYPE
This object is used as to specify the agent bay that MEP was previously in.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55Unsigned32 (1)read-onlycurrent
wwpLeosCfmRemoteMEPPreviousShelfIndex
OBJECT-TYPE
This object is used as to specify the agent shelf that MEP was previously in.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56Unsigned32 (1)read-onlycurrent
wwpLeosCfmRemoteMEPPreviousModuleIndex
OBJECT-TYPE
This object is used as to specify the agent module that MEP was previously in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57Unsigned32 (1..7 | 255)read-onlycurrent
wwpLeosCfmRemoteMEPLastPortStatus
OBJECT-TYPE
This object is used as to specify the remote MEP last port status.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58INTEGER {unknown(1), none(2), blocked(3), up(4)}read-onlycurrent
wwpLeosCfmRemoteMEPLastInterfaceStatus
OBJECT-TYPE
This object is used as to specify the remote MEP interface status.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59INTEGER {none(1), up(2), down(3), testing(4), dormant(5), lowerLayerDown(6), notPresent(7)}read-onlycurrent
wwpLeosCfmRemoteMEPLastSeqNum
OBJECT-TYPE
This object is used to show the tbd.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60Unsigned32read-onlycurrent
wwpLeosCfmRemoteMEPCCMSeqErrors
OBJECT-TYPE
This object is used to show the number of MEP CCM frames sequence errors.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61Unsigned32read-onlycurrent
wwpLeosCfmRemoteMEPCCMLevel
OBJECT-TYPE
This object is used as to specify the CCM level.
1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62INTEGER (1..256)read-onlycurrent
wwpLeosCfmRemoteMEPDeleteAll
OBJECT-TYPE
Setting this object to true will delete all remote meps. This object will always return false.
1.3.6.1.4.1.6141.2.60.35.1.8.65TruthValueread-writecurrent
wwpLeosCfmStack
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.9
wwpLeosCfmPortStackTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the CFM port stack table.
1.3.6.1.4.1.6141.2.60.35.1.9.1not-accessibledeprecated
wwpLeosCfmPortStackEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
1.3.6.1.4.1.6141.2.60.35.1.9.1.1not-accessibledeprecated
wwpLeosCfmPortStackPort
OBJECT-TYPE
This object is used as index in the table and is used to specify the port id.
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.1INTEGER (1..65535)read-onlydeprecated
wwpLeosCfmPortStackVid
OBJECT-TYPE
This object is used as index in the table and is used to show the VLAN.
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.2INTEGER (1..24576)read-onlydeprecated
wwpLeosCfmPortStackType
OBJECT-TYPE
This object is used as index in the table and is used to show the type of Maintenance Point.
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.3INTEGER {mepUp(1), mepDown(2), mip(3)}read-onlydeprecated
wwpLeosCfmPortStackLevel
OBJECT-TYPE
This object is used as index in the table and is used to show the level of stack.
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.4Unsigned32 (0..7)read-onlydeprecated
wwpLeosCfmPortStackMEPId
OBJECT-TYPE
The MEP ID.
1.3.6.1.4.1.6141.2.60.35.1.9.1.1.5INTEGER (1..100)read-onlydeprecated
wwpLeosCfmMipCCMDb
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.10
wwpLeosCfmMipCCMDbTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the MIP CCM Db table.
1.3.6.1.4.1.6141.2.60.35.1.10.1not-accessiblecurrent
wwpLeosCfmMipCCMDbEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1not-accessiblecurrent
wwpLeosCfmMipCCMDbIndex
OBJECT-TYPE
This object shows the CCM DB vlan.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.1Unsigned32 (1..24576)read-onlycurrent
wwpLeosCfmMipCCMDbVid
OBJECT-TYPE
This object shows the CCM DB vlan.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.2Unsigned32 (1..24576)read-onlycurrent
wwpLeosCfmMipCCMDbMacAddr
OBJECT-TYPE
This object shows the mac address.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.3MacAddressread-onlycurrent
wwpLeosCfmMipCCMDbPort
OBJECT-TYPE
This object shows the CCM DB port.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.4INTEGER (1..65535)read-onlycurrent
wwpLeosCfmMipCCMDbMEPID
OBJECT-TYPE
This object shows the CCM DB MEP ID.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.5INTEGER (1..8191)read-onlycurrent
wwpLeosCfmMipCCMdbNumCCMRx
OBJECT-TYPE
This object shows the number of CCM DB packets received.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6Counter32read-onlycurrent
wwpLeosCfmMipCCMDbTime
OBJECT-TYPE
This object shows the CCM DB time.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.7TimeTicksread-onlycurrent
wwpLeosCfmMipCCMDbLastMacStatus
OBJECT-TYPE
This object shows the CCM DB last mac status.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.8TruthValueread-onlycurrent
wwpLeosCfmMipCCMDbRDIErrorFlag
OBJECT-TYPE
This object shows the CCM DB RDI error flag status.
1.3.6.1.4.1.6141.2.60.35.1.10.1.1.9TruthValueread-onlycurrent
wwpLeosCfmFaultNotif
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.11
wwpLeosCfmFaultTrapState
OBJECT-TYPE
Setting this object to 'disabled' will cause CFM fault traps to be suppressed.
1.3.6.1.4.1.6141.2.60.35.1.11.1INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmDelay
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.12
wwpLeosCfmDelayMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.12.1not-accessiblecurrent
wwpLeosCfmDelayMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1not-accessiblecurrent
wwpLeosCfmDelayMsgPortId
OBJECT-TYPE
This object is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosCfmDelayMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmDelayMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmDelayMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmDelayMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.3MacAddressread-createcurrent
wwpLeosCfmDelayMsgCount
OBJECT-TYPE
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.4INTEGER (2..600)read-createcurrent
wwpLeosCfmDelayMsgPriority
OBJECT-TYPE
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.5INTEGER (0..7)read-createcurrent
wwpLeosCfmDelayMsgRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'. If 'destroy' is used and either TargetMacAddr or TargetMEPID is specified, a cancel will be done for any repeating test on those items.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.6RowStatusread-createcurrent
wwpLeosCfmDelayMsgRepeat
OBJECT-TYPE
Used to make the Delay Measurement test a repeating test.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.7INTEGER {enable(1), disable(2)}read-createcurrent
wwpLeosCfmDelayMsgRepeatCount
OBJECT-TYPE
The repeat time in minutes for the Delay Measurement test. If zero is specified, the test runs continuously.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.8INTEGER (0..1440)read-createcurrent
wwpLeosCfmDelayMsgDelayThreshold
OBJECT-TYPE
The fault threshold for the Delay Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the average delay result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.9INTEGER (-1..2147483647)read-createcurrent
wwpLeosCfmDelayMsgJitterThreshold
OBJECT-TYPE
The fault threshold for the Jitter Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the average jitter result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.10INTEGER (-1..2147483647)read-createcurrent
wwpLeosCfmDelayMsgMaxDelayThreshold
OBJECT-TYPE
The fault threshold for the Delay Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the maximum delay result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.11INTEGER (-1..2147483647)read-createcurrent
wwpLeosCfmDelayMsgMaxJitterThreshold
OBJECT-TYPE
The fault threshold for the Jitter Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the maximum jitter result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.12.1.1.12INTEGER (-1..2147483647)read-createcurrent
wwpLeosCfmFrameLoss
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.13
wwpLeosCfmFrameLossMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.13.1not-accessiblecurrent
wwpLeosCfmFrameLossMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1not-accessiblecurrent
wwpLeosCfmFrameLossMsgPortId
OBJECT-TYPE
This object is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosCfmFrameLossMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmFrameLossMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmFrameLossMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.3MacAddressread-createcurrent
wwpLeosCfmFrameLossMsgCount
OBJECT-TYPE
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.4INTEGER (2..600)read-createcurrent
wwpLeosCfmFrameLossMsgPriority
OBJECT-TYPE
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.5INTEGER (0..7)read-createcurrent
wwpLeosCfmFrameLossMsgRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'. If 'destroy' is used and either TargetMacAddr or TargetMEPID is specified, a cancel will be done for any repeating test on those items.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.6RowStatusread-createcurrent
wwpLeosCfmFrameLossMsgRepeat
OBJECT-TYPE
Used to make the Frame Loss Measurement test a repeating test.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.7INTEGER {enable(1), disable(2)}read-createcurrent
wwpLeosCfmFrameLossMsgRepeatCount
OBJECT-TYPE
The repeat time in minutes for the Frame Loss Measurement test. If zero is specified, the test runs continuously.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.8INTEGER (0..1440)read-createcurrent
wwpLeosCfmFrameLossMsgFlnThreshold
OBJECT-TYPE
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss near result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.9INTEGER (-1..600)read-createcurrent
wwpLeosCfmFrameLossMsgFlfThreshold
OBJECT-TYPE
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.13.1.1.10INTEGER (-1..600)read-createcurrent
wwpLeosCfmRemoteMEPCCMLoss
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.14
wwpLeosCfmRemoteMEPCCMLossTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the Remote MEP CCM Loss table.
1.3.6.1.4.1.6141.2.60.35.1.14.1not-accessiblecurrent
wwpLeosCfmRemoteMEPCCMLossEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmRemoteMEPCCMLossTable.
1.3.6.1.4.1.6141.2.60.35.1.14.1.1not-accessiblecurrent
wwpLeosCfmRemoteMEPCCMLossNum
OBJECT-TYPE
This object is used as an index into the table and is used to specify the CCM Loss bucket to be returned.
1.3.6.1.4.1.6141.2.60.35.1.14.1.1.1Unsigned32 (1..96)not-accessiblecurrent
wwpLeosCfmRemoteMEPCCMLossCount
OBJECT-TYPE
Count of the number of CCM's lost during the wwpLeosCfmServiceCCMLossBucketInterval sample period.
1.3.6.1.4.1.6141.2.60.35.1.14.1.1.2Gauge32read-onlycurrent
wwpLeosCfmExtStack
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.15
wwpLeosCfmExtPortStackTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the CFM port stack table.
1.3.6.1.4.1.6141.2.60.35.1.15.1not-accessiblecurrent
wwpLeosCfmExtPortStackEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
1.3.6.1.4.1.6141.2.60.35.1.15.1.1not-accessiblecurrent
wwpLeosCfmExtPortStackVid
OBJECT-TYPE
This object is used as index in the table and is used to show the VLAN.
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.1INTEGER (1..24576)read-onlycurrent
wwpLeosCfmExtPortStackPort
OBJECT-TYPE
This object is used as index in the table and is used to specify the port id.
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.2INTEGER (1..65535)read-onlycurrent
wwpLeosCfmExtPortStackType
OBJECT-TYPE
This object is used as index in the table and is used to show the type of Maintenance Point.
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.3INTEGER {mepUp(1), mepDown(2), mip(3)}read-onlycurrent
wwpLeosCfmExtPortStackLevel
OBJECT-TYPE
This object is used as index in the table and is used to show the level of stack.
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.4Unsigned32 (0..7)read-onlycurrent
wwpLeosCfmExtPortStackMEPId
OBJECT-TYPE
The MEP ID.
1.3.6.1.4.1.6141.2.60.35.1.15.1.1.5INTEGER (1..100)read-onlycurrent
wwpLeosCfmServiceFrameBudget
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.16
wwpLeosCfmServiceFrameBudgetTable
OBJECT-TYPE
The (conceptual) table listing the config parameters for the CFM service frame budget table.
1.3.6.1.4.1.6141.2.60.35.1.16.1not-accessiblecurrent
wwpLeosCfmServiceFrameBudgetEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmServiceFrameBudgetTable.
1.3.6.1.4.1.6141.2.60.35.1.16.1.1not-accessiblecurrent
wwpLeosCfmSlotIndex
OBJECT-TYPE
This object identifies the slot number.
1.3.6.1.4.1.6141.2.60.35.1.16.1.1.1INTEGER (0..8)not-accessiblecurrent
wwpLeosCfmServiceFrameBudgetSlot
OBJECT-TYPE
This object specifies the CFM frame budget for the slot for the given service.
1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2Counter32read-onlycurrent
wwpLeosTceCfmMIBObj
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20
wwpLeosTceCfmMIP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.1
wwpLeosTceCfmMipTable
OBJECT-TYPE
The (conceptual) table listing the config parameters for the CFM MIP Table. This table is not applicable if wwpLeosTceCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.1.1not-accessiblecurrent
wwpLeosTceCfmMipEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosTceCfmMipTable.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1not-accessiblecurrent
wwpLeosTceCfmMipLiType
OBJECT-TYPE
This object specifies an unique index into the table.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.1INTEGER {subPort(1), pbtService(2), mplsStaticPeMeshVC(3), mplsDynamicPeMeshVC(4), mplsStaticPeSpokeVC(5), mplsDynamicPeSpokeVC(6), mplsStaticMtuSpokeVC(7), mplsDynamicMtuSpokeVC(8), none(99)}not-accessiblecurrent
wwpLeosTceCfmMipLiIndex
OBJECT-TYPE
This object specifies an unique index into the table.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.2INTEGER (1..65535)not-accessiblecurrent
wwpLeosTceCfmMipPgid
OBJECT-TYPE
This object is used to specify the port group id.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.3Unsigned32read-onlycurrent
wwpLeosTceCfmMipBayIndex
OBJECT-TYPE
This object is used to specify the chassis bay.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.4Unsigned32 (1)read-onlycurrent
wwpLeosTceCfmMipShelfIndex
OBJECT-TYPE
This object is used to specify the chassis shelf.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.5Unsigned32 (1)read-onlycurrent
wwpLeosTceCfmMipModuleIndex
OBJECT-TYPE
This object is used to specify the chassis module.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.6Unsigned32 (1..7 | 255)read-onlycurrent
wwpLeosTceCfmMipMacAddr
OBJECT-TYPE
This object is used to specify the Mac Address.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.7MacAddressread-onlycurrent
wwpLeosTceCfmMipLevel
OBJECT-TYPE
This object is used to specify the level attribute.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.8INTEGER (0..7)read-createcurrent
wwpLeosTceCfmMipStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.9RowStatusread-createcurrent
wwpLeosTceCfmMipLiName
OBJECT-TYPE
Logical interface name associated with the Mip.
1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.10DisplayStringread-onlycurrent
wwpLeosTceCfmLoopback
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.3
wwpLeosTceCfmLoopbackMsgTable
OBJECT-TYPE
The (conceptual) table listing the config parameters for the LoopbackMsg. The following attributes are required to create a LoopbackMsg: -- wwpLeosCfmServiceIndex -- wwpLeosTceCfmLoopbackMsgSubPortIndex -- wwpLeosTceCfmLoopbackMsgTargetMEPID or -- wwpLeosTceCfmLoopbackMsgTargetMacAddr -- wwpLeosTceCfmLoopbackMsgCount -- wwpLeosTceCfmLoopbackMsgData -- wwpLeosTceCfmLoopbackMsgPriority -- wwpLeosTceCfmLoopbackMsgRowStatus Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.3.1not-accessiblecurrent
wwpLeosTceCfmLoopbackMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosTceCfmLoopbackMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1not-accessiblecurrent
wwpLeosTceCfmLoopbackMsgLocalMEPID
OBJECT-TYPE
This object is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.1Unsigned32 (1..8191)not-accessiblecurrent
wwpLeosTceCfmLoopbackMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosTceCfmLoopbackMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.3MacAddressread-createcurrent
wwpLeosTceCfmLoopbackMsgCount
OBJECT-TYPE
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.4INTEGER (1..20)read-createcurrent
wwpLeosTceCfmLoopbackMsgData
OBJECT-TYPE
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.5DisplayString (SIZE(1..127))read-createcurrent
wwpLeosTceCfmLoopbackMsgPriority
OBJECT-TYPE
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.6INTEGER (0..7)read-createcurrent
wwpLeosTceCfmLoopbackMsgServiceName
OBJECT-TYPE
This object is used to specify the Service used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.7DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmLoopbackMsgSubPortName
OBJECT-TYPE
This object is used to specify the sub-port used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.8DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmLoopbackMsgNextLbmTransId
OBJECT-TYPE
This object is used to specify next LoopbackMsg transaction id.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.9Unsigned32read-onlycurrent
wwpLeosTceCfmLoopbackMsgTotalTxLbm
OBJECT-TYPE
This object is used to specify total LoopbackMsg sent.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.10Unsigned32read-onlycurrent
wwpLeosTceCfmLoopbackMsgTotalRxLbrIo
OBJECT-TYPE
This object is used to specify total in-order LoopbackMsg received.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.11Unsigned32read-onlycurrent
wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo
OBJECT-TYPE
This object is used to specify total out of order LoopbackMsg received.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.12Unsigned32read-onlycurrent
wwpLeosTceCfmLoopbackMsgRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To send a LoopbackMsg, a manager must set this object to 'createAndGo'. There is no concept of delete a LoopbackMsg in this table.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.13RowStatusread-createcurrent
wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch
OBJECT-TYPE
This object is used to specify total content mismatch LoopbackMsg received.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.14Unsigned32read-onlycurrent
wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected
OBJECT-TYPE
This object is used to specify total unexpected LoopbackMsg received.
1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.15Unsigned32read-onlycurrent
wwpLeosTceCfmStack
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.5
wwpLeosTceCfmPortStackTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the CFM port stack table. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.5.1not-accessiblecurrent
wwpLeosTceCfmPortStackEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1not-accessiblecurrent
wwpLeosTceCfmPortStackServiceType
OBJECT-TYPE
This object is used to specify the CFM sub-port service type.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.1INTEGER {vs(1), pbt(2)}not-accessiblecurrent
wwpLeosTceCfmPortStackServiceIndex
OBJECT-TYPE
A unique identifier for CFM domain entry.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.2Unsigned32 (1..65535)not-accessiblecurrent
wwpLeosTceCfmPortStackSubPortType
OBJECT-TYPE
This object is used to specify the CFM sub-port type.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.3INTEGER {vs(1), encapPbt(2), decapPbt(3)}not-accessiblecurrent
wwpLeosTceCfmPortStackSubPortIndex
OBJECT-TYPE
This object is used to specify the CFM sub-port index.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.4Unsigned32not-accessiblecurrent
wwpLeosTceCfmPortStackSubPortName
OBJECT-TYPE
This object is used to specify the CFM sub-port name.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.5DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmPortStackOperState
OBJECT-TYPE
This object is used to specify the CFM sub-port operational state.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.6INTEGER {unknown(1), invalid(2), enabled(3), disabled(4), notAuthenticated(5), loopbackTx(6), loopbackRx(7), unequipped(8)}read-onlycurrent
wwpLeosTceCfmPortStackPgid
OBJECT-TYPE
This object is used to specify the CFM sub-port group id.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.7Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackBayIndex
OBJECT-TYPE
This object is used to specify the CFM sub-port agent bay.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.8Unsigned32 (1)read-onlycurrent
wwpLeosTceCfmPortStackShelfIndex
OBJECT-TYPE
This object is used to specify the CFM sub-port agent shelf.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.9Unsigned32 (1)read-onlycurrent
wwpLeosTceCfmPortStackModuleIndex
OBJECT-TYPE
This object is used to specify the CFM sub-port agent slot. Index value of 255 is reserved for Lag ports.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.10Unsigned32 (1..7 | 255)read-onlycurrent
wwpLeosTceCfmPortStackVsPbtName
OBJECT-TYPE
This object is used to specify the CFM PBT name.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.11DisplayString (SIZE(1..32))read-onlycurrent
wwpLeosTceCfmPortStackEgressXformTagValue1
OBJECT-TYPE
This object is used to specify the egress tag value.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.13Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackEgressXformTagPriority1
OBJECT-TYPE
This object is used to specify the egress tag priority.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.14Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackEgressXformTagEtype1
OBJECT-TYPE
This object is used to specify the egress tag etype.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.15Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackEgressXformTagValue2
OBJECT-TYPE
This object is used to specify the egress tag value.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.16Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackEgressXformTagPriority2
OBJECT-TYPE
This object is used to specify the egress tag priority.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.17Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackEgressXformTagEtype2
OBJECT-TYPE
This object is used to specify the egress tag etype.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.18Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackMepCount
OBJECT-TYPE
This object is used to specify the MEP counts in both directions.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.19Unsigned32read-onlycurrent
wwpLeosTceCfmPortStackMipLevel
OBJECT-TYPE
This object is used to specify the port stack MIP level.
1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.20Unsigned32read-onlycurrent
wwpLeosTceCfmMEP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.7
wwpLeosTceCfmMEPTable
OBJECT-TYPE
The (conceptual) table listing the config parameters for the CFM MEP table. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.7.1not-accessiblecurrent
wwpLeosTceCfmMEPEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMEPTable.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1not-accessiblecurrent
wwpLeosTceCfmMEPId
OBJECT-TYPE
This is used as the index in the table.This object specifies the mep id for the given service.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.1Unsigned32 (1..8191)not-accessiblecurrent
wwpLeosTceCfmMEPAdminState
OBJECT-TYPE
This object is used to specify the admin state of CFM MEP.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.2INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosTceCfmMEPOperState
OBJECT-TYPE
This object is used to specify the oper state of CFM MEP.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.3INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosTceCfmMEPDirection
OBJECT-TYPE
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.4INTEGER {up(1), down(2)}read-createcurrent
wwpLeosTceCfmMEPCCMState
OBJECT-TYPE
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.5INTEGER {on(1), off(2)}read-writecurrent
wwpLeosTceCfmMEPCCMPriority
OBJECT-TYPE
This object specified the priority of CCM messages transmitted.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.6INTEGER (0..7)read-writecurrent
wwpLeosTceCfmMEPLTMPriority
OBJECT-TYPE
This object specifies the priority received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.7INTEGER (0..7)read-writecurrent
wwpLeosTceCfmMEPMacAddr
OBJECT-TYPE
This object specifies the mac address received on the given service and port..
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.8MacAddressread-onlycurrent
wwpLeosTceCfmMEPNextLbmSeqNumber
OBJECT-TYPE
This object specifies the next lbm sequence number received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.9Counter32read-onlycurrent
wwpLeosTceCfmMEPRxValidInOrderLoopbackReply
OBJECT-TYPE
This object specifies the total valid in order loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.10Counter32read-onlycurrent
wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply
OBJECT-TYPE
This object specifies the total valid out of order loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.11Counter32read-onlycurrent
wwpLeosTceCfmMEPNextLTMSeqNumber
OBJECT-TYPE
This object specifies the next LTM sequence number received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.12Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLoopbackRepliesTxmt
OBJECT-TYPE
This object specifies the flags total loopback replies transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.13Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLTMRecevied
OBJECT-TYPE
This object specifies the total LTM messages received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.14Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLTMTxmt
OBJECT-TYPE
This object specifies the total ltm transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.15Counter32read-onlycurrent
wwpLeosTceCfmMEPNumCCMTxmt
OBJECT-TYPE
This object specifies the total CCM messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.16Counter32read-onlycurrent
wwpLeosTceCfmMEPRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.17RowStatusread-createcurrent
wwpLeosTceCfmMEPNumDMMSent
OBJECT-TYPE
This object specifies the total delay measurement messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.18Counter32read-onlycurrent
wwpLeosTceCfmMEPDMMDelay
OBJECT-TYPE
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.19Counter32read-onlycurrent
wwpLeosTceCfmMEPDMMJitter
OBJECT-TYPE
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.20Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLMMSent
OBJECT-TYPE
This object specifies the total frame loss measurement messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.21Counter32read-onlycurrent
wwpLeosTceCfmMEPLMMFrameLossNear
OBJECT-TYPE
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.22Counter32read-onlycurrent
wwpLeosTceCfmMEPLMMFrameLossFar
OBJECT-TYPE
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.23Counter32read-onlycurrent
wwpLeosTceCfmMEPLiType
OBJECT-TYPE
This object specifies Li Type on which the Mep is created.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.24INTEGER {vs(1), pbtService(2), mplsStaticPeMeshVC(3), mplsDynamicPeMeshVC(4), mplsStaticPeSpokeVC(5), mplsDynamicPeSpokeVC(6), mplsStaticMtuSpokeVC(7), mplsDynamicMtuSpokeVC(8), none(99)}read-createcurrent
wwpLeosTceCfmMEPLiIndex
OBJECT-TYPE
This object specifies LiIndex for creating MEP
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.25Unsigned32read-createcurrent
wwpLeosTceCfmMEPServiceName
OBJECT-TYPE
This object is used to specify the service name assigned to this port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.50DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosTceCfmMEPSubPortName
OBJECT-TYPE
This object represents the sub-port, PbtService or Mpls Vc name assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.51DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosTceCfmMEPVsPbtName
OBJECT-TYPE
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.52DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosTceCfmMEPLogicalPortName
OBJECT-TYPE
This object represents the logical port name assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.53DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosTceCfmMEPSubPortIndex
OBJECT-TYPE
This object is used to specify the CFM sub-port index.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.54Unsigned32read-writecurrent
wwpLeosTceCfmMEPEncapsulation
OBJECT-TYPE
This object is used to specify the encapsulation applied to the service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.55INTEGER {ieee802dot1d(1), pbtCfmEncap(2)}read-onlycurrent
wwpLeosTceCfmMEPLeadPortBayIndex
OBJECT-TYPE
This object is used as to specify the agent bay that MEP is in.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.56Unsigned32 (1)read-onlycurrent
wwpLeosTceCfmMEPLeadPortShelfIndex
OBJECT-TYPE
This object is used as to specify the agent shelf that MEP is in.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.57Unsigned32 (1)read-onlycurrent
wwpLeosTceCfmMEPLeadPortModuleIndex
OBJECT-TYPE
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.58Unsigned32 (1..7 | 255)read-onlycurrent
wwpLeosTceCfmMEPPBTBvid
OBJECT-TYPE
This object specifies the BVID assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.59Unsigned32 (1..8191)read-onlycurrent
wwpLeosTceCfmMEPPBTEtype
OBJECT-TYPE
This object specifies the E-type assigned to the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.60Unsigned32 (1..8191)read-onlycurrent
wwpLeosTceCfmMEPNumLbmTxmt
OBJECT-TYPE
This object specifies the total loopback messages transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.61Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLbmReceived
OBJECT-TYPE
This object specifies the total loopback messages received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.62Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLoopbackRepliesReceived
OBJECT-TYPE
This object specifies the total loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.63Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLTRepliesTxmt
OBJECT-TYPE
This object specifies the total link trace replies transmitted on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.64Counter32read-onlycurrent
wwpLeosTceCfmMEPNumLTRepliesReceived
OBJECT-TYPE
This object specifies the total link trace replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.65Counter32read-onlycurrent
wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived
OBJECT-TYPE
This object specifies the total unexpected link trace replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.66Counter32read-onlycurrent
wwpLeosTceCfmMEPNumCCMReceived
OBJECT-TYPE
This object specifies the total CCM messages received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.67Counter32read-onlycurrent
wwpLeosTceCfmMEPRxContentMismatchLoopbackReply
OBJECT-TYPE
This object specifies the total content mismatch loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.68Counter32read-onlycurrent
wwpLeosTceCfmMEPRxUnexpectedLoopbackReply
OBJECT-TYPE
This object specifies the total unexpected loopback replies received on the given service and port.
1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.69Counter32read-onlycurrent
wwpLeosTceCfmDelay
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.12
wwpLeosTceCfmDelayMsgTable
OBJECT-TYPE
The (conceptual) table listing the config parameters for the DelayMeasurementMsg. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.12.1not-accessiblecurrent
wwpLeosTceCfmDelayMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1not-accessiblecurrent
wwpLeosTceCfmDelayMsgLocalMEPId
OBJECT-TYPE
This object is used to specify the local MEPId.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.1INTEGER (1..65535)read-onlycurrent
wwpLeosTceCfmDelayMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmDelayMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosTceCfmDelayMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmDelayMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.3MacAddressread-createcurrent
wwpLeosTceCfmDelayMsgCount
OBJECT-TYPE
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.4INTEGER (2..9000)read-createcurrent
wwpLeosTceCfmDelayMsgPriority
OBJECT-TYPE
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.5INTEGER (0..7)read-createcurrent
wwpLeosTceCfmDelayMsgRowStatus
OBJECT-TYPE
Is a display read-only field only. A row in this table is created by the system when a service and mep is created
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.6RowStatusread-onlycurrent
wwpLeosTceCfmDelayMsgRepeatInterval
OBJECT-TYPE
Represents the Transmission Period for the Cfm Delay.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.40Unsigned32 (0..1440)read-createcurrent
wwpLeosTceCfmDelayMsgDelayThreshold
OBJECT-TYPE
Represents the Threshold for the average delay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.41INTEGER (1..65535)read-createcurrent
wwpLeosTceCfmDelayMsgJitterThreshold
OBJECT-TYPE
Represents the threshold value for the Jitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.42INTEGER (1..65535)read-createcurrent
wwpLeosTceCfmDelayMsgServiceName
OBJECT-TYPE
This object is used to specify the service to be used when sending DelayMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.43DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmDelayMsgSubPortName
OBJECT-TYPE
This object represents the sub-port name where the DelayMsg was sent.
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.44DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmDelayMsgDelay
OBJECT-TYPE
This object represents the Average Delay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.50Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgJitter
OBJECT-TYPE
This object represents the average jitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.51Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgTotalTxDmm
OBJECT-TYPE
This object represents the total Delaymessages transmitted
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.52Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgTotalRxDmm
OBJECT-TYPE
This object represents the total Delaymessages received
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.53Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgTotalTxDmr
OBJECT-TYPE
This object represents the total DMRs transmitted
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.54Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgTotalRxDmr
OBJECT-TYPE
This object represents the total DMRs received
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.55Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgAction
OBJECT-TYPE
This object represents the action for the message (send, clear or cancel)
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.56SendStateread-createcurrent
wwpLeosTceCfmDelayMsgMaxDelay
OBJECT-TYPE
This object represents the Maximum Delay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.57Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgMaxJitter
OBJECT-TYPE
This object represents the Maximum jitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.58Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgMaxDelayThreshold
OBJECT-TYPE
Represents the threshold for maximum delay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.59INTEGER (1..65535)read-createcurrent
wwpLeosTceCfmDelayMsgMaxJitterThreshold
OBJECT-TYPE
Represents the threshold value for maximum Jitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.60INTEGER (1..65535)read-createcurrent
wwpLeosTceCfmDelayMsgMinDelay
OBJECT-TYPE
This object represents the Maximum Delay
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.61Unsigned32read-onlycurrent
wwpLeosTceCfmDelayMsgMinJitter
OBJECT-TYPE
This object represents the Maximum jitter
1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.62Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLoss
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.13
wwpLeosTceCfmFrameLossMsgTable
OBJECT-TYPE
The (conceptual) table listing the config parameters for the FrameLossMeasurementMsg. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.13.1not-accessiblecurrent
wwpLeosTceCfmFrameLossMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1not-accessiblecurrent
wwpLeosTceCfmFrameLossMsgLocalMEPId
OBJECT-TYPE
This object is used to specify the Local MEPID at the source.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.1INTEGER (1..65535)accessible-for-notifycurrent
wwpLeosTceCfmFrameLossMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosTceCfmFrameLossMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.3MacAddressread-createcurrent
wwpLeosTceCfmFrameLossMsgCount
OBJECT-TYPE
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.4INTEGER (2..600)read-createcurrent
wwpLeosTceCfmFrameLossMsgPriority
OBJECT-TYPE
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.5INTEGER (0..7)read-createcurrent
wwpLeosTceCfmFrameLossMsgRowStatus
OBJECT-TYPE
Is a read-only field. A row in this table is system-generated on creation of cfm service and cfm mep objects
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.6RowStatusread-onlycurrent
wwpLeosTceCfmFrameLossMsgRepeatInterval
OBJECT-TYPE
Represents the Transmission Interval for the Frame loss messages
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.50Unsigned32 (0..1440)read-createcurrent
wwpLeosTceCfmFrameLossMsgNearLossThreshold
OBJECT-TYPE
Represents the threshold value for the near-end frame loss
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.51INTEGER (0..600)read-createcurrent
wwpLeosTceCfmFrameLossMsgFarLossThreshold
OBJECT-TYPE
Represents the threshold value for the far-end frame loss
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.52INTEGER (0..600)read-createcurrent
wwpLeosTceCfmFrameLossMsgServiceName
OBJECT-TYPE
This object is used to specify the service to be used when sending FrameLossMsg (LMM).
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.53DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmFrameLossMsgSubPortName
OBJECT-TYPE
This object is used to specify the sub-port name to be used when sending FrameLossMsg (LMM).
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.54DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosTceCfmFrameLossMsgFrameLossNear
OBJECT-TYPE
This object represents the near-end Frame Loss. For a MEP, near-end Frame loss refers to frame loss associated with the ingress data frames.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.55Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLossMsgFrameLossFar
OBJECT-TYPE
This object represents the far-end Frame Loss. For a MEP, far-end Frame loss refers to frame loss associated with the egress data frames.
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.56Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLossMsgTotalTxLmm
OBJECT-TYPE
This object represents the total LMMs transmitted
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.57Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLossMsgTotalRxLmm
OBJECT-TYPE
This object represents the total LMMs received
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.58Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLossMsgTotalTxLmr
OBJECT-TYPE
This object represents the total LMRs transmitted
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.59Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLossMsgTotalRxLmr
OBJECT-TYPE
This object represents the total LMRs received
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.60Unsigned32read-onlycurrent
wwpLeosTceCfmFrameLossMsgAction
OBJECT-TYPE
This object represents the action for the message (send, clear or cancel).
1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.61SendStateread-createcurrent
wwpLeosTceCfmMipCCMDb
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.20.14
wwpLeosTceCfmMipCCMDbTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the MIP CCM Db table. Not applicable to 6.x
1.3.6.1.4.1.6141.2.60.35.1.20.14.1not-accessiblecurrent
wwpLeosTceCfmMipCCMDbEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1not-accessiblecurrent
wwpLeosTceCfmMipCCMDbIndex
OBJECT-TYPE
Mip CCM database index.
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.1Unsigned32not-accessiblecurrent
wwpLeosTceCfmMipCCMDbMacAddr
OBJECT-TYPE
MAC Address
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.2MacAddressread-onlycurrent
wwpLeosTceCfmMipCCMDbServiceName
OBJECT-TYPE
Service Name
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.3DisplayStringread-onlycurrent
wwpLeosTceCfmMipCCMDbSubPortName
OBJECT-TYPE
SubPort Name
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.4DisplayStringread-onlycurrent
wwpLeosTceCfmMipCCMdbNumCCMRx
OBJECT-TYPE
Total Received CCMs
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.5Counter32read-onlycurrent
wwpLeosTceCfmMipCCMDbCCMRxTime
OBJECT-TYPE
CCM Rx Time in ms
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.6Unsigned32read-onlycurrent
wwpLeosTceCfmMipCCMDbLevel
OBJECT-TYPE
Level
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.7INTEGER (0..7)read-onlycurrent
wwpLeosTceCfmMipCCMDbMEPID
OBJECT-TYPE
Mep Id
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.8INTEGER (1..8191)read-onlycurrent
wwpLeosTceCfmMipRDI
OBJECT-TYPE
RDI
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.9INTEGER {on(1), off(2)}read-onlycurrent
wwpLeosTceCfmMipLastPortStatus
OBJECT-TYPE
Last Port Status
1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.10INTEGER {blocked(1), up(2), none(99)}read-onlycurrent
wwpLeosCfmExtMIBObj
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21
wwpLeosCfmExtLoopback
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.3
wwpLeosCfmExtLoopbackMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the LoopbackMsg. The following attributes are required to create a LoopbackMsg: -- wwpLeosCfmServiceIndex -- wwpLeosCfmExtLoopbackMsgTargetMEPID or -- wwpLeosCfmExtLoopbackMsgTargetMacAddr -- wwpLeosCfmExtLoopbackMsgCount -- wwpLeosCfmExtLoopbackMsgData -- wwpLeosCfmExtLoopbackMsgPriority -- wwpLeosCfmExtLoopbackMsgAction -- wwpLeosCfmExtLoopbackMsgInterval -- wwpLeosCfmExtLoopbackMsgTimeout -- wwpLeosCfmExtLoopbackMsgLoss
1.3.6.1.4.1.6141.2.60.35.1.21.3.1not-accessiblecurrent
wwpLeosCfmExtLoopbackMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmExtLoopbackMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1not-accessiblecurrent
wwpLeosCfmExtLoopbackMsgLocalMEPID
OBJECT-TYPE
This object is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.1Unsigned32 (1..8191)not-accessiblecurrent
wwpLeosCfmExtLoopbackMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmExtLoopbackMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.3MacAddressread-createcurrent
wwpLeosCfmExtLoopbackMsgCount
OBJECT-TYPE
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.4INTEGER (1..3000)read-createcurrent
wwpLeosCfmExtLoopbackMsgData
OBJECT-TYPE
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.5DisplayString (SIZE(1..127))read-createcurrent
wwpLeosCfmExtLoopbackMsgPriority
OBJECT-TYPE
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.6INTEGER (0..7)read-createcurrent
wwpLeosCfmExtLoopbackMsgAction
OBJECT-TYPE
This object represents the action for the message (send, clear or cancel). If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) will return commit_failed_error.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.7SendStateread-createcurrent
wwpLeosCfmExtLoopbackMsgInterval
OBJECT-TYPE
This object is used to specify the LoopbackMsg interval to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.8INTEGER (10..60000)read-createcurrent
wwpLeosCfmExtLoopbackMsgTimeout
OBJECT-TYPE
This object is used to specify the LoopbackMsg timeout to be used when sending link LoopbackMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.9INTEGER (2000..10000)read-createcurrent
wwpLeosCfmExtLoopbackMsgLoss
OBJECT-TYPE
This object is used to display the LoopbackMsg loss count.
1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.10INTEGER (1..3000)read-onlycurrent
wwpLeosCfmExtMEP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.7
wwpLeosCfmExtMEPTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM MEP table. To create entry in this table use SNMP multiple set operation. - wwpLeosCfmExtPortId must be specified. - wwpLeosCfmExtVlanId must be specified. - wwpLeosCfmExtMEPRowStatus must be set to 'CreateAndGo'
1.3.6.1.4.1.6141.2.60.35.1.21.7.1not-accessiblecurrent
wwpLeosCfmExtMEPEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMEPTable.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1not-accessiblecurrent
wwpLeosCfmExtMEPId
OBJECT-TYPE
This is used as the index in the table. This object specifies the MEP id for the given service.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.1Unsigned32 (1..8191)accessible-for-notifycurrent
wwpLeosCfmExtPortId
OBJECT-TYPE
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.2INTEGER (1..65535)read-createcurrent
wwpLeosCfmExtVlanId
OBJECT-TYPE
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.3INTEGER (0..4094)read-createcurrent
wwpLeosCfmExtMEPAdminState
OBJECT-TYPE
This object is used to specify the admin state of CFM MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.4INTEGER {disabled(1), enabled(2)}read-writecurrent
wwpLeosCfmExtMEPOperState
OBJECT-TYPE
This object is used to specify the oper state of CFM MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.5INTEGER {disabled(1), enabled(2)}read-onlycurrent
wwpLeosCfmExtMEPDirection
OBJECT-TYPE
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type VLAN.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.6INTEGER {up(1), down(2)}read-createcurrent
wwpLeosCfmExtMEPCCMState
OBJECT-TYPE
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.7INTEGER {on(1), off(2)}read-writecurrent
wwpLeosCfmExtMEPCCMPriority
OBJECT-TYPE
This object specified the priority of CCM messages transmitted.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.8INTEGER (0..7)read-writecurrent
wwpLeosCfmExtMEPLTMPriority
OBJECT-TYPE
The priority received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.9INTEGER (0..7)read-writecurrent
wwpLeosCfmExtMEPMacAddr
OBJECT-TYPE
The mac address received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.10MacAddressread-onlycurrent
wwpLeosCfmExtMEPNextLbmSeqNumber
OBJECT-TYPE
The next lbm sequence number received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.11Counter32read-onlycurrent
wwpLeosCfmExtMEPNextLTMSeqNumber
OBJECT-TYPE
The next LTM sequence number received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.12Counter32read-onlycurrent
wwpLeosCfmExtMEPRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.13RowStatusread-createcurrent
wwpLeosCfmExtMEPDMMDelay
OBJECT-TYPE
The average delay in microseconds measured during the last DMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.14Counter32read-onlycurrent
wwpLeosCfmExtMEPDMMJitter
OBJECT-TYPE
The average jitter in microseconds measured during the last DMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.15Counter32read-onlycurrent
wwpLeosCfmExtMEPLMMFrameLossNear
OBJECT-TYPE
The number of lost frames on the near side measured during the last LMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.16Counter32read-onlycurrent
wwpLeosCfmExtMEPLMMFrameLossFar
OBJECT-TYPE
The number of lost frames on the far side measured during the last LMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.17Counter32read-onlycurrent
wwpLeosCfmExtMEPServiceName
OBJECT-TYPE
The service name assigned to this MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.50DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosCfmExtMEPInterfaceName
OBJECT-TYPE
The interface name associated with this MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.51DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosCfmExtMEPServiceInstanceName
OBJECT-TYPE
The service instance name associated with this MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.52DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosCfmExtMEPLogicalPortName
OBJECT-TYPE
Logical port name associated with this MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.53DisplayString (SIZE(1..31))read-onlycurrent
wwpLeosCfmExtMEPTagMode
OBJECT-TYPE
Tag-mode for the given mep and service. When on(1) the MEP originates all frames with an additional inner-most tag. On a down MEP this is the CVLAN tag.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.54INTEGER {on(1), off(2)}read-writecurrent
wwpLeosCfmExtMEPTagVID
OBJECT-TYPE
VLAN ID for the additional tag given mep and service.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.55INTEGER (0..4095)read-writecurrent
wwpLeosCfmExtMEPTagPriority
OBJECT-TYPE
The priority encoded in the additional tag.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.56INTEGER (0..7)read-writecurrent
wwpLeosCfmExtMEPLMMBadSequence
OBJECT-TYPE
This object specifes the number of frames with bad sequence numbers measured during the last LMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.57Counter32read-onlycurrent
wwpLeosCfmExtMEPCCMComment
OBJECT-TYPE
This mib object allows to set the MEP CCM Comment.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.58DisplayString (SIZE(1..32))read-createcurrent
wwpLeosCfmExtMEPLMMMissingSequence
OBJECT-TYPE
This object specifes the number of frames with missing sequence numbers measured during the last LMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.59Counter32read-onlycurrent
wwpLeosCfmExtMEPBlockOppositeFaultCurrent
OBJECT-TYPE
The number of frames seen in the current sample window.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.60Counter32read-onlycurrent
wwpLeosCfmExtMEPBlockOppositeFaultThreshold
OBJECT-TYPE
The number of frames to block before generating a fault.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.61Unsigned32read-writecurrent
wwpLeosCfmExtMEPBlockOppositeFaultTime
OBJECT-TYPE
The frame sample window size in minutes.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.62INTEGER (1..3600)read-writecurrent
wwpLeosCfmExtMEPDMMMinDelay
OBJECT-TYPE
The minimum delay in microseconds measured during the last DMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.63Counter32read-onlycurrent
wwpLeosCfmExtMEPDMMMaxDelay
OBJECT-TYPE
The maximum delay in microseconds measured during the last DMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.64Counter32read-onlycurrent
wwpLeosCfmExtMEPDMMMinJitter
OBJECT-TYPE
The minimum jitter in microseconds measured during the last DMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.65Counter32read-onlycurrent
wwpLeosCfmExtMEPDMMMaxJitter
OBJECT-TYPE
The maximum jitter in microseconds measured during the last DMM performance test on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.66Counter32read-onlycurrent
wwpLeosCfmExtMEPAccelerated
OBJECT-TYPE
Specifies if the mep is monitored in hardware.
1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.67TruthValueread-onlycurrent
wwpLeosCfmExtMEPStatsTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM MEP table.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2not-accessiblecurrent
wwpLeosCfmExtMEPStatsEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMEPTable.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1not-accessiblecurrent
wwpLeosCfmExtMEPStatsTotalValidFramesReceived
OBJECT-TYPE
This object specifies total valid frames received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.1Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived
OBJECT-TYPE
This object specifies total invalid frames received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.2Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived
OBJECT-TYPE
This object specifies total invalid message overflow frames received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.3Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived
OBJECT-TYPE
This object specifies total invalid port status TLVs received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.4Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived
OBJECT-TYPE
This object specifies total invalid interface status TLVs received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.5Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived
OBJECT-TYPE
This object specifies total invalid senderID frames received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.6Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsCCMTxmt
OBJECT-TYPE
This object specifies total CCM sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.7Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsValidCCMReceived
OBJECT-TYPE
This object specifies total valid CCMs received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.8Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsCCMInSequenceReceived
OBJECT-TYPE
This object specifies total CCM received in sequence.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.9Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived
OBJECT-TYPE
This object specifies total not in sequence received CCMs.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.10Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived
OBJECT-TYPE
This object specifies Xcon CCMs received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.11Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsMAIDXconCCMReceived
OBJECT-TYPE
This object specifies MAID Xcon CCMs.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.12Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived
OBJECT-TYPE
This object specifies Interval Error CCM received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.13Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsRxInvalidCCM
OBJECT-TYPE
This object specified invalid CCMs received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.14Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLBMTxmt
OBJECT-TYPE
This object specifies number of LBM sent
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.15Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLBRTxmt
OBJECT-TYPE
This object specifies number of LBR sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.16Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInOrderLBRReceived
OBJECT-TYPE
This object specifies number of in order LBR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.17Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived
OBJECT-TYPE
This object specifies Out of order LBR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.18Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsContentMismatchLBRReceived
OBJECT-TYPE
This object specifies number of content mismatch LBR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.19Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsUnexpectedLBRReceived
OBJECT-TYPE
This object specifies unexpected LBR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.20Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidLBRReceived
OBJECT-TYPE
This object specifies invalid LBR Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.21Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLTMTxmt
OBJECT-TYPE
This object specifies number of LTM sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.22Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsValidLTMReceived
OBJECT-TYPE
This object specifies total valid LTM received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.23Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived
OBJECT-TYPE
This object specifies total invalid LTM received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.24Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidLTRAction
OBJECT-TYPE
This object specifies total invalid LTR action.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.25Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLTRTxmt
OBJECT-TYPE
This object specifies total LTR sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.26Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLTRReceived
OBJECT-TYPE
This object specifies unexpected LTR sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.27Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsDMMTxmt
OBJECT-TYPE
This object specifies total DMM sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.28Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsDMMReceived
OBJECT-TYPE
This object specifies total DMM received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.29Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsDMRTxmt
OBJECT-TYPE
This object specifies total DMR sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.30Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsDMRReceived
OBJECT-TYPE
This object specifies total DMR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.31Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsDMReplyTimeout
OBJECT-TYPE
This object specifies DMR Timeout.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.32Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLMMTxmt
OBJECT-TYPE
This object specifies total LMM Sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.33Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLMMReceived
OBJECT-TYPE
This object specifies total LMM received
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.34Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLMRTxmt
OBJECT-TYPE
This object specifies total LMR sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.35Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLMRReceived
OBJECT-TYPE
This object specifies total LMR Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.36Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsLMRTimeout
OBJECT-TYPE
This object specifies total LMR Timeout.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.37Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived
OBJECT-TYPE
This object specifies total MEPID Error CCM Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.38Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsClear
OBJECT-TYPE
Setting this object to clear will clear MEP stats for the given service and MepId. This object can't be set to none
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.40INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmExtMEPStatsValidLBMReceived
OBJECT-TYPE
This object specifies Valid LBM Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.41Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidLBMReceived
OBJECT-TYPE
This object specifies total invalid LBM Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.42Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsUnexpectedLTRReceived
OBJECT-TYPE
This object specifies total unexpected LTR Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.43Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidDMMReceived
OBJECT-TYPE
This object specifies total invalid DMM Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.44Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidDMRReceived
OBJECT-TYPE
This object specifies total invalid DMR Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.45Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsUnexpectedDMRReceived
OBJECT-TYPE
This object specifies total unexpected DMR Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.46Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidLMMReceived
OBJECT-TYPE
This object specifies total invalid LMM Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.47Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidLMRReceived
OBJECT-TYPE
This object specifies total invalid LMR Received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.48Counter64read-onlycurrent
wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep
OBJECT-TYPE
This object specifies total invalid frames blocked by opposite MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.49Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM MEP table.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3not-accessiblecurrent
wwpLeosCfmExtMEPLastStatsEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMEPTable.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1not-accessiblecurrent
wwpLeosCfmExtMEPLastStatsPriority
OBJECT-TYPE
This object specifies last LBM Priority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.1Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLBMCount
OBJECT-TYPE
This object specifies last LBM Count
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.2Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLBMSent
OBJECT-TYPE
This object specifies last number LBM sent
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.3Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLBMToSend
OBJECT-TYPE
This object specifies last LBM to send.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.4Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsInOrderLBRReceived
OBJECT-TYPE
This object specifies last In oder LBR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.5Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived
OBJECT-TYPE
This object specifies last out of order LBR received
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.6Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMPriority
OBJECT-TYPE
This object specifies Last DMM Priority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.7Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMTxmt
OBJECT-TYPE
This object specifies number of last DMM sent
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.8Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMReceived
OBJECT-TYPE
This object specifies last DMM Received
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.9Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMDelay
OBJECT-TYPE
This object specifies Last DMM Delay.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.10Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMJitter
OBJECT-TYPE
This object specifies last DMM Jitter.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.11Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLMMPriority
OBJECT-TYPE
This object specifies last LMM priority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.12Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLMMTxtm
OBJECT-TYPE
This object specifies last LMM sent.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.13Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLMMReceived
OBJECT-TYPE
This object specifies number of last LMM received.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.14Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsFrameLossNear
OBJECT-TYPE
This object specifies last near Frame Losses
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.15Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsFrameLossFar
OBJECT-TYPE
This object specifies last far Frames Loss
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.16Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLTMPriority
OBJECT-TYPE
This object specifies last LTM Priority
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.17Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLTMSequenceNo
OBJECT-TYPE
This object specifies last LTM Sequence number.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.18Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsLTMInitialTTL
OBJECT-TYPE
This object specifies last initial TTL LTM.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.19Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsFrameLossBadSequence
OBJECT-TYPE
This object specifes the number of frames with bad sequence numbers measured during the last LMM performance test on the given service and Mep.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.20Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMMinDelay
OBJECT-TYPE
This object specifies Last DMM Minimum Delay.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.21Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMMaxDelay
OBJECT-TYPE
This object specifies Last DMM Maximum Delay.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.22Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMMinJitter
OBJECT-TYPE
This object specifies last DMM Minimum Jitter.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.23Counter64read-onlycurrent
wwpLeosCfmExtMEPLastStatsDMMMaxJitter
OBJECT-TYPE
This object specifies last DMM Maximum Jitter.
1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.24Counter64read-onlycurrent
wwpLeosCfmExtMEPClearStatistics
OBJECT-TYPE
Setting this object to clear(1) will clear statistics for all Meps across all services
1.3.6.1.4.1.6141.2.60.35.1.21.7.4INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmExtMEPDelayHistoryTable
OBJECT-TYPE
The (conceptual) table listing the Y.1731 Delay History table for the CFM MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5not-accessiblecurrent
wwpLeosCfmExtMEPDelayHistoryEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmMEPDelayHistoryTable.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1not-accessiblecurrent
wwpLeosCfmExtMEPDelayHistoryIndex
OBJECT-TYPE
This is the history entry index into the table.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.1INTEGER (0..255)not-accessiblecurrent
wwpLeosCfmExtMEPDelayHistoryStatus
OBJECT-TYPE
The status of the test sent on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.2INTEGER {running(1), done(2), canceled(3), timeout(4)}read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryInterval
OBJECT-TYPE
The transmit rate of the Y.1731 DMM Frames sent on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.3INTEGER (0..7)read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryPriority
OBJECT-TYPE
The priority of the Y.1731 DMM Frames sent on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.4INTEGER (0..7)read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryMEPId
OBJECT-TYPE
The remote MEP id the test was ran against.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.5Unsigned32 (1..8191)read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryNumDMMSent
OBJECT-TYPE
The number of DMM frames sent on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.6Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryNumDMRReceived
OBJECT-TYPE
The number of DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.7Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryMinDelay
OBJECT-TYPE
The minimum delay(us) seen on DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.8Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryAveDelay
OBJECT-TYPE
The average delay(us) seen on DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.9Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryMaxDelay
OBJECT-TYPE
The maximum delay(us) seen on DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.10Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryMinJitter
OBJECT-TYPE
The minimum jitter(us) seen on DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.11Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryAveJitter
OBJECT-TYPE
The average jitter(us) seen on DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.12Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryMaxJitter
OBJECT-TYPE
The maximum jitter(us) seen on DMR frames received on the given service and MEP.
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.13Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryStartTime
OBJECT-TYPE
The time the test began on the given service and MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.14Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryStopTime
OBJECT-TYPE
The time the test terminated on the given service and MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.15Unsigned32read-onlycurrent
wwpLeosCfmExtMEPDelayHistoryClear
OBJECT-TYPE
Setting this object to clear will clear MEP delay history for the given service and MepId. This object can't be set to none
1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.16INTEGER {clear(1), none(2)}read-writecurrent
wwpLeosCfmExtLinkTrace
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.8
wwpLeosCfmExtLinkTraceMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the LinkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1not-accessiblecurrent
wwpLeosCfmExtLinkTraceMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1not-accessiblecurrent
wwpLeosCfmExtLinkTraceMsgLocalMepID
OBJECT-TYPE
This represent local mepid
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.1INTEGER (1..8191)not-accessiblecurrent
wwpLeosCfmExtLinkTraceMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the target MEPID. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.2INTEGER (1..8191)read-createcurrent
wwpLeosCfmExtLinkTraceMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the target MacAddress to be used when sending link LinkMsg. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.3MacAddressread-createcurrent
wwpLeosCfmExtLinkTraceMsgTTL
OBJECT-TYPE
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.4INTEGER (1..255)read-createcurrent
wwpLeosCfmExtLinkTraceMsgSequenceNumber
OBJECT-TYPE
This object is used to specify the sequence number in the linkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.5Integer32read-onlycurrent
wwpLeosCfmExtLinkTraceMsgPriority
OBJECT-TYPE
This object is used to specify the priority to be used when sending LinkTraceMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.6INTEGER (0..7)read-createcurrent
wwpLeosCfmExtLinkTraceMsgAction
OBJECT-TYPE
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMacAddr is specified then LinkTraceMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMEPID is specified then LinktraceMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) will return commit_failed_error.
1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.7SendStateread-createcurrent
wwpLeosCfmExtLinkTraceMsgReplyTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the LinkTrace Msg Reply.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2not-accessiblecurrent
wwpLeosCfmExtLinkTraceMsgReplyEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmExtLinkTraceMsgReplyTable.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1not-accessiblecurrent
wwpLeosCfmExtLinkTraceMsgReplyTTL
OBJECT-TYPE
This object is used to specify the TTL of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.1Integer32 (0..255)read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyTTLIndex
OBJECT-TYPE
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.2Unsigned32 (1..24576)read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplySequenceNumber
OBJECT-TYPE
This object is used to specify the sequence number of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.3Integer32read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr
OBJECT-TYPE
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.4MacAddressread-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyMEPID
OBJECT-TYPE
This object is used to specify the MEP ID of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.5Integer32read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr
OBJECT-TYPE
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.6MacAddressread-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyRelayAction
OBJECT-TYPE
This object is used to specify the message reply relay action.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.7INTEGER {invalid(1), unknown(2), fdb(3), mpdb(4), noLearn(5), hit(6)}read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyIngressPort
OBJECT-TYPE
This object is used to specify the message reply ingress port.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.8INTEGER (1..65535)read-onlyobsolete
wwpLeosCfmExtLinkTraceMsgReplyIngressAction
OBJECT-TYPE
This object is used to specify the message reply ingress action.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.9INTEGER {ok(1), blocked(2), vid(3), down(4), none(5)}read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyEgressPort
OBJECT-TYPE
This object is used to specify the message reply egress port.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.10INTEGER (1..65535)read-onlyobsolete
wwpLeosCfmExtLinkTraceMsgReplyEgressAction
OBJECT-TYPE
This object is used to specify the message reply egress action.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.11INTEGER {none(1), ttl(2), down(3), blocked(4), vid(5), ok(6)}read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr
OBJECT-TYPE
This MIB object is used to specify the message reply ingress port.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.12DisplayString (SIZE(1..8))read-onlycurrent
wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr
OBJECT-TYPE
This MIB object is used to specify the message reply egress port.
1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.13DisplayString (SIZE(1..8))read-onlycurrent
wwpLeosCfmExtDelay
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.12
wwpLeosCfmExtDelayMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1not-accessiblecurrent
wwpLeosCfmExtDelayMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1not-accessiblecurrent
wwpLeosCfmExtDelayMsgLocalMEPId
OBJECT-TYPE
This object is used to specify the local MEPId.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.1INTEGER (1..65535)not-accessiblecurrent
wwpLeosCfmExtDelayMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmExtDelayMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtDelayMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.3MacAddressread-createcurrent
wwpLeosCfmExtDelayMsgCount
OBJECT-TYPE
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg. Counts between 2 and 600 are valid. The system default count will be used if a value of 0 is entered.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.4INTEGER (0 | 2..600)read-createcurrent
wwpLeosCfmExtDelayMsgPriority
OBJECT-TYPE
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.5INTEGER (0..7)read-createcurrent
wwpLeosCfmExtDelayMsgRepeat
OBJECT-TYPE
Used to make the Delay Measurement test a repeating test.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.8INTEGER {enable(1), disable(2)}read-createcurrent
wwpLeosCfmExtDelayMsgRepeatCount
OBJECT-TYPE
The repeat time in minutes for the Delay Measurement test. If zero is specified, the test runs continuously.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.9INTEGER (0..1440)read-createcurrent
wwpLeosCfmExtDelayMsgDelayThreshold
OBJECT-TYPE
Represents the fault Threshold for the average delay, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the average delay result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.41INTEGER (-1..65535)read-createcurrent
wwpLeosCfmExtDelayMsgJitterThreshold
OBJECT-TYPE
Represents the fault threshold value for the average Jitter, specified in microseconds. A value of -1 disables the generation of faults, 0 or greater will be compared to the average jitter result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.42INTEGER (-1..65535)read-createcurrent
wwpLeosCfmExtDelayMsgAction
OBJECT-TYPE
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then it will cancel sending Delay messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then it will cancel sending Delay messages to remoteMEPID.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43SendStateread-createcurrent
wwpLeosCfmExtDelayMsgMaxDelayThreshold
OBJECT-TYPE
Represents the Threshold for the maximum Delay, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the maximum delay result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.44INTEGER (-1..65535)read-createcurrent
wwpLeosCfmExtDelayMsgMaxJitterThreshold
OBJECT-TYPE
Represents the threshold value for the maximum Jitter, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the maximum jitter result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.45INTEGER (-1..65535)read-createcurrent
wwpLeosCfmExtFrameLoss
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.13
wwpLeosCfmExtFrameLossMsgTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1not-accessiblecurrent
wwpLeosCfmExtFrameLossMsgEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1not-accessiblecurrent
wwpLeosCfmExtFrameLossMsgLocalMEPId
OBJECT-TYPE
This object is used to specify the Local MEPID at teh source.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.1INTEGER (1..65535)not-accessiblecurrent
wwpLeosCfmExtFrameLossMsgTargetMEPID
OBJECT-TYPE
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMacAddr is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.2Unsigned32 (1..8191)read-createcurrent
wwpLeosCfmExtFrameLossMsgTargetMacAddr
OBJECT-TYPE
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMEPID is not specified else error will be returned.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.3MacAddressread-createcurrent
wwpLeosCfmExtFrameLossMsgCount
OBJECT-TYPE
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.4INTEGER (2..600)read-createcurrent
wwpLeosCfmExtFrameLossMsgPriority
OBJECT-TYPE
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.5INTEGER (0..7)read-createcurrent
wwpLeosCfmExtFrameLossMsgRepeat
OBJECT-TYPE
Used to make the Frame Loss Measurement test a repeating test.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.8INTEGER {enable(1), disable(2)}read-createcurrent
wwpLeosCfmExtFrameLossMsgRepeatCount
OBJECT-TYPE
The repeat time in minutes for the Frame Loss Measurement test. If zero is specified, the test runs continuously.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.9INTEGER (0..1440)read-createcurrent
wwpLeosCfmExtFrameLossMsgFlnThreshold
OBJECT-TYPE
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss near result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.10INTEGER (-1..600)read-createcurrent
wwpLeosCfmExtFrameLossMsgFlfThreshold
OBJECT-TYPE
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.11INTEGER (-1..600)read-createcurrent
wwpLeosCfmExtFrameLossMsgAction
OBJECT-TYPE
This object represents the action for the message (send, clear or cancel) This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtFrameLossMacAddr is specified then FrameLoss is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then FrameLossMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMacAddr is specified then it will cancel sending FrameLoss Messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then it will cancel sending FrameLoss messages to remoteMEPID.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.12SendStateread-createcurrent
wwpLeosCfmExtFrameLossMsgSeqThreshold
OBJECT-TYPE
The sequence threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.13INTEGER (-1..600)read-createcurrent
wwpLeosCfmExtInterfaceStack
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.14
wwpLeosCfmExtInterfaceStackTable
OBJECT-TYPE
The (conceptual) table listing the display parameters for the CFM port stack table.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1not-accessiblecurrent
wwpLeosCfmExtInterfaceStackEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1not-accessiblecurrent
wwpLeosCfmExtInterfaceStackServiceInstanceType
OBJECT-TYPE
This object is used to specify the CFM port service type.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.1INTEGER {ethVs(1), vlan(2), pbtTunnel(3)}not-accessiblecurrent
wwpLeosCfmExtInterfaceStackServiceInstanceIndex
OBJECT-TYPE
A unique identifier for CFM domain entry.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.2Unsigned32 (1..65535)not-accessiblecurrent
wwpLeosCfmExtInterfaceStackInterfaceType
OBJECT-TYPE
This object is used to specify the CFM interface type.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.3INTEGER {logicalPort(1), pbtEncap(2), pbtDecap(3), none(99)}not-accessiblecurrent
wwpLeosCfmExtInterfaceStackInterfaceIndex
OBJECT-TYPE
This object is used to specify the CFM sub port index.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.4Unsigned32not-accessiblecurrent
wwpLeosCfmExtInterfaceStackLevel
OBJECT-TYPE
This object is used to specify the CFM interface level.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.5Unsigned32 (0..7)not-accessiblecurrent
wwpLeosCfmExtInterfaceStackStackType
OBJECT-TYPE
This object is used to specify the CFM interface type.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.6INTEGER {mepUp(1), mepDown(2), mipUp(3), mipDown(4)}not-accessiblecurrent
wwpLeosCfmExtInterfaceStackInterfaceName
OBJECT-TYPE
This object is used to specify the CFM interface name.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.7DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmExtInterfaceStackServiceInstanceName
OBJECT-TYPE
This object is used to specify the CFM interface name.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.8DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmExtInterfaceStackPortName
OBJECT-TYPE
This object is used to specify the CFM interface port name.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.9DisplayString (SIZE(0..31))read-onlycurrent
wwpLeosCfmExtInterfaceStackOperState
OBJECT-TYPE
This object is used to specify the CFM interface oper state.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.10INTEGER {up(1), down(2)}read-onlycurrent
wwpLeosCfmExtInterfaceStackVid
OBJECT-TYPE
This object is used to specify the CFM interface vid.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.11INTEGER (0..4094)read-onlycurrent
wwpLeosCfmExtInterfaceStackPgid
OBJECT-TYPE
This object is used to specify the CFM interface pgid.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.12Unsigned32read-onlycurrent
wwpLeosCfmExtInterfaceStackMEPId
OBJECT-TYPE
This object is used to specify the CFM interface mepid.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.13INTEGER (1..8191)read-onlycurrent
wwpLeosCfmExtInterfaceStackMacAddress
OBJECT-TYPE
This object is used to specify the CFM interface macaddress.
1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.14MacAddressread-onlycurrent
wwpLeosCfmExtMIP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.15
wwpLeosCfmExtMipTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM Ext MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error.
1.3.6.1.4.1.6141.2.60.35.1.21.15.1not-accessiblecurrent
wwpLeosCfmExtMipEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmExtMipTable.
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1not-accessiblecurrent
wwpLeosCfmExtMipVid
OBJECT-TYPE
This object is used as index in the table and is used to specify the VLAN service type for which intermediate maintenance points can be created.
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.1INTEGER (0..24576)not-accessiblecurrent
wwpLeosCfmExtMipPort
OBJECT-TYPE
This object is used as index in the table and is used to specify the port.
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.2INTEGER (1..65535)not-accessiblecurrent
wwpLeosCfmExtMipLevel
OBJECT-TYPE
The level attribute.
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.3INTEGER (0..7)not-accessiblecurrent
wwpLeosCfmExtMipStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.4RowStatusread-createcurrent
wwpLeosCfmExtInterfaceMIP
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.16
wwpLeosCfmExtInterfaceMipTable
OBJECT-TYPE
The (conceptual) table listing the configuration parameters for the CFM Ext MIP SI Table.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1not-accessiblecurrent
wwpLeosCfmExtInterfaceMipEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmExtInterfaceMipTable.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1not-accessiblecurrent
wwpLeosCfmExtInterfaceMipServiceInstanceType
OBJECT-TYPE
This object is used to specify the service instance type. Interpretation of wwpLeosCfmExtInterfaceMipServiceInstanceIndex depends on the value of this MIB object.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.1INTEGER {ethVs(1), vlan(2), pbtTunnel(3)}not-accessiblecurrent
wwpLeosCfmExtInterfaceMipServiceInstanceIndex
OBJECT-TYPE
This object is used to specify the service instance index. Interpretation of this object depends on the value of wwpLeosCfmExtInterfaceMipServiceInstanceType.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.2Unsigned32 (1..65535)not-accessiblecurrent
wwpLeosCfmExtInterfaceMipInterfaceType
OBJECT-TYPE
This object is used to specify the CFM interface type.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.3INTEGER {none(0), portVlan(1), pbtEncap(2), pbtDecap(3)}not-accessiblecurrent
wwpLeosCfmExtInterfaceMipInterfaceIndex
OBJECT-TYPE
This object is used to specify an interface index. When the value of object wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a port.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.4Unsigned32not-accessiblecurrent
wwpLeosCfmExtInterfaceMipInterfaceSubIndex
OBJECT-TYPE
This object is used to specify a sub interface index. When the value of object wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a vlan.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.5Unsigned32not-accessiblecurrent
wwpLeosCfmExtInterfaceMipLevel
OBJECT-TYPE
The level attribute.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.6INTEGER (0..7)not-accessiblecurrent
wwpLeosCfmExtInterfaceMipStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.7RowStatusread-createcurrent
wwpLeosCfmExtOamPort
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.1.21.17
wwpLeosCfmExtOamPortTable
OBJECT-TYPE
The (conceptual) table listing if a port is OAM capable.
1.3.6.1.4.1.6141.2.60.35.1.21.17.1not-accessiblecurrent
wwpLeosCfmExtOamPortEntry
OBJECT-TYPE
An entry (conceptual row) in the wwpLeosCfmExtOamPortTable.
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1not-accessiblecurrent
wwpLeosCfmExtOamPortIndex
OBJECT-TYPE
Specifies the port index.
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.1Integer32 (1..3072)not-accessiblecurrent
wwpLeosCfmExtOamPortSupported
OBJECT-TYPE
Specifies if the port is OAM capable.
1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.2TruthValueread-onlycurrent
wwpLeosCfmNotifMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.2
wwpLeosCfmNotifMIBNotification
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.2.0
wwpLeosCfmMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.3
wwpLeosCfmMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.3.1
wwpLeosCfmMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.60.35.3.2

Notifications

NameOIDStatus
wwpLeosCfmFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected.
1.3.6.1.4.1.6141.2.60.35.2.0.1current
wwpLeosCfmPbtFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected for a PBT tunnel. wwpLeosCfmServiceType will always be set to pbtTunnel.
1.3.6.1.4.1.6141.2.60.35.2.0.2deprecated
wwpLeosCfmDelayFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.3current
wwpLeosCfmJitterFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.4current
wwpLeosCfmFrameLossNearFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.5current
wwpLeosCfmFrameLossFarFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.6current
wwpLeosCfmExtDelayFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.7current
wwpLeosCfmExtJitterFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.8current
wwpLeosCfmExtFrameLossNearFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.9current
wwpLeosCfmFaultTrapSet
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected.
1.3.6.1.4.1.6141.2.60.35.2.0.10current
wwpLeosCfmFaultTrapClear
NOTIFICATION-TYPE
A notification is sent whenever the fault is resolved and cleared.
1.3.6.1.4.1.6141.2.60.35.2.0.11current
wwpLeosCfmDmmTrap
NOTIFICATION-TYPE
A notification is sent whenever delay average goes above delay-threshold during a delay measurement test, also generated when delay average goes below threshold after going up as a clearing event. Same notification is generated whenever the average jitter goes above Jitter threshold during a delay measurement test and when the maximum delay and jitter go above the maximum delay and jitter thresholds respectively. Also generated when jitter average goes below jitter threshold after going up as a clearing event. When jitter event is generated, wwpLeosTceCfmDelayMsgDelayThreshold and wwpLeosTceCfmDelayMsgDelay varbind values are set to 0. Similarly when max delay event is generated wwpLeosTceCfmDelayMsgMaxJitter and wwpLeosTceCfmDelayMsgMaxJitterThreshold are set to 0 and vice versa
1.3.6.1.4.1.6141.2.60.35.2.0.12current
wwpLeosCfmLmmTrap
NOTIFICATION-TYPE
A notification is sent whenever FrameLoss Near average goes above FrameLoss Near threshold during a Frame Loss measurement test. Also generated when FrameLoss Near average goes below FrameLoss Near threshold after going up as a clearing event. Same notification is generated whenever FrameLoss Far Average goes above Frameloss Far threshold value during a Frame Loss measurement test. Also generated when Frameloss Far average goes below Frameloss Far threshold after going up as a clearing event. When FrameLoss Near event is generated wwpLeosTceCfmFrameLossMsgFrameLossFar and wwpLeosTceCfmFrameLossMsgFarLossThreshold varbind values are 0
1.3.6.1.4.1.6141.2.60.35.2.0.13current
wwpLeosCfmExtFrameLossFarFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
1.3.6.1.4.1.6141.2.60.35.2.0.20current
wwpLeosCfmExtFaultTrapSet
NOTIFICATION-TYPE
A notification is sent whenever the fault is detected.
1.3.6.1.4.1.6141.2.60.35.2.0.21current
wwpLeosCfmExtFaultTrapClear
NOTIFICATION-TYPE
A notification is sent whenever the fault is resolved and cleared.
1.3.6.1.4.1.6141.2.60.35.2.0.22current
wwpLeosCfmBadSequenceFaultTrap
NOTIFICATION-TYPE
A notification is sent whenever wwpLeosCfmExtMEPLMMBadSequence exceeds wwpLeosCfmExtFrameLossMsgSeqThreshold in a Frame Loss Measurement test.
1.3.6.1.4.1.6141.2.60.35.2.0.23current
wwpLeosCfmBlockOppositeMEPSetTrap
NOTIFICATION-TYPE
A notification sent whenever the number of frames blocked by the presence of a MEP of the opposite type exceeds the threshold during the sample window.
1.3.6.1.4.1.6141.2.60.35.2.0.24current
wwpLeosCfmBlockOppositeMEPClearTrap
NOTIFICATION-TYPE
A notification sent whenever the number of frames blocked by the presence of a MEP of the opposite type drops below the threshold during the sample window.
1.3.6.1.4.1.6141.2.60.35.2.0.25current