MIBs Depot

WWP-EXT-BRIDGE-MIB

Registered at
1.3.6.1.4.1.6141.2.4
Last updated
2005-11-23 09:00
Organization
Ciena, Inc
Revisions
2005-11-23 09:00, 2001-04-03 17:00
Namespace
ciena
Source file
WWP-EXT-BRIDGE-MIB
Digest
sha256:4f368339c77e32d183c2557f56775ee25f2582474f8658784917645ee315731b

Description

This MIB module is for the Extension of the BRIDGE MIB for WWP Products

Contact

Mib Meister 115 North Sullivan Road Spokane Valley, WA 99037 USA Phone: +1 509 242 9000 Email: support@ciena.com

Imports

FromSymbols
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIInteger32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
WWP-SMIwwpModules

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WWP-EXT-BRIDGE-MIB
WWP-SMI

Textual conventions

NameOIDSyntaxAccessStatus
PortList
TEXTUAL-CONVENTION
Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
current
VlanId
TEXTUAL-CONVENTION
A 12-bit VLAN ID used in the VLAN Tag header.
current

Objects

NameOIDSyntaxAccessStatus
wwpExtBridgeMIBObjects
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.1
wwpPort
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.1.1
wwpPortTable
OBJECT-TYPE
Table of Ports.
1.3.6.1.4.1.6141.2.4.1.1.1not-accessiblecurrent
wwpPortEntry
OBJECT-TYPE
Port Entry in the Table.
1.3.6.1.4.1.6141.2.4.1.1.1.1not-accessiblecurrent
wwpPortId
OBJECT-TYPE
Port ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.
1.3.6.1.4.1.6141.2.4.1.1.1.1.1INTEGER (1..65535)read-onlycurrent
wwpPortType
OBJECT-TYPE
The port type for the port.
1.3.6.1.4.1.6141.2.4.1.1.1.1.2INTEGER {lx(1), fastEth(2), voip(3), sx(4), hundredFx(5), unknown(6)}read-onlycurrent
wwpPortName
OBJECT-TYPE
Friendly name for the port.
1.3.6.1.4.1.6141.2.4.1.1.1.1.3DisplayString (SIZE(0..32))read-writecurrent
wwpPortPhysAddr
OBJECT-TYPE
The ethernet MAC address for the port. This information can also be achieved via dot1dTpFdbTable
1.3.6.1.4.1.6141.2.4.1.1.1.1.4MacAddressread-onlycurrent
wwpPortAutoNeg
OBJECT-TYPE
The object sets the port to AUTO NEG MOde and vice versa. Specific platforms may have requirements of configuring speed before moving the port to out of AUTO-NEG mode.
1.3.6.1.4.1.6141.2.4.1.1.1.1.5TruthValueread-writecurrent
wwpPortAdminStatus
OBJECT-TYPE
The desired state of the port.
1.3.6.1.4.1.6141.2.4.1.1.1.1.6INTEGER {up(1), down(2)}read-writecurrent
wwpPortOperStatus
OBJECT-TYPE
The current operational state of Port.
1.3.6.1.4.1.6141.2.4.1.1.1.1.7INTEGER {up(1), down(2)}read-onlycurrent
wwpPortAdminSpeed
OBJECT-TYPE
Desired speed of the port. Set the port speed to be either 10MB, 100MB, or gig. The Management Station can't set the wwpPortAdminSpeed to auto. The default value for this object depends upon the platform.
1.3.6.1.4.1.6141.2.4.1.1.1.1.8INTEGER {tenMb(1), hundredMb(2), gig(3), auto(4)}read-writecurrent
wwpPortOperSpeed
OBJECT-TYPE
The current operational speed of the port in MB.
1.3.6.1.4.1.6141.2.4.1.1.1.1.9Integer32read-onlycurrent
wwpPortAdminDuplex
OBJECT-TYPE
The desired mode for the port. It can be set to either half or full duplex operation but not to auto.The default value for this object depends upon the platform.
1.3.6.1.4.1.6141.2.4.1.1.1.1.10INTEGER {half(1), full(2), auto(3)}read-writecurrent
wwpPortOperDuplex
OBJECT-TYPE
The current duplex mode of the port.
1.3.6.1.4.1.6141.2.4.1.1.1.1.11INTEGER {half(1), full(2), auto(3)}read-onlycurrent
wwpPortAdminFlowCtrl
OBJECT-TYPE
Configures the ports flow control operation. Need to check 802.3x for additional modes for gig ports.
1.3.6.1.4.1.6141.2.4.1.1.1.1.12INTEGER {disable(0), enable(1)}read-writecurrent
wwpPortOperFlowCtrl
OBJECT-TYPE
Shows ports flow control configuration.
1.3.6.1.4.1.6141.2.4.1.1.1.1.13INTEGER {disabled(0), enabled(1)}read-onlycurrent
wwpPortTagged
OBJECT-TYPE
The port tagged Status can be set to tagged or untagged. If a port is part of more than one VLAN, then the port Status should be 'tagged'.
1.3.6.1.4.1.6141.2.4.1.1.1.1.14INTEGER {untagged(0), tagged(1)}read-writecurrent
wwpPortUntaggedPriority
OBJECT-TYPE
The 802.1p packet priority to be assigned to packets associated with this port that do not have an 802.1Q VLAN header.
1.3.6.1.4.1.6141.2.4.1.1.1.1.15INTEGER {p0(0), p1(1), p2(2), p3(3), p4(4), p5(5), p6(6), p7(7)}read-writecurrent
wwpPortMaxFrameSize
OBJECT-TYPE
Setting this object will set the max frame size allowed on a port. The max frame size can vary between 1522 bytes till 9216 bytes. Default value is 1522 bytes
1.3.6.1.4.1.6141.2.4.1.1.1.1.16INTEGER (1522..9126)read-writecurrent
wwpPortIngressFiltering
OBJECT-TYPE
When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept all incoming frames.
1.3.6.1.4.1.6141.2.4.1.1.1.1.17INTEGER {true(1), false(2)}read-writecurrent
wwpPortRateLimitState
OBJECT-TYPE
When set to true, the rate limiting mechanism is enabled for this port. When set to false, the rate limiting mechanism is disabled for this port.
1.3.6.1.4.1.6141.2.4.1.1.1.1.18TruthValueread-writecurrent
wwpPortRateLimitValue
OBJECT-TYPE
The value of this object represents the desired bit-rate limit for this port. When the rate limiting mechanism is enabled for this port, this value is enforced to the best extent possible by the device. For some devices the actual maximum bit-rate allowed may exceed the rate limit parameter under certain circumstances due to hardware and software limitations.
1.3.6.1.4.1.6141.2.4.1.1.1.1.19INTEGER (0..2147483647)read-writecurrent
wwpLocalMgmtPortEnable
OBJECT-TYPE
Setting this object to false(2) will disable the local Management Port. The object has been deprecated as we need to have the general functionality of disabling and enabling any in-band and out-band management interface.
1.3.6.1.4.1.6141.2.4.1.1.2TruthValueread-writedeprecated
wwpVlan
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.1.2
wwpVlanVersionNumber
OBJECT-TYPE
The version number of IEEE 802.1Q that this device supports.
1.3.6.1.4.1.6141.2.4.1.2.1INTEGER {version1(1)}read-onlycurrent
wwpMaxVlanId
OBJECT-TYPE
The maximum IEEE 802.1Q VLAN ID that this device supports.
1.3.6.1.4.1.6141.2.4.1.2.2VlanIdread-onlycurrent
wwpMaxSupportedVlans
OBJECT-TYPE
The maximum number of IEEE 802.1Q VLANs that this device supports.
1.3.6.1.4.1.6141.2.4.1.2.3Unsigned32read-onlycurrent
wwpNumVlans
OBJECT-TYPE
The current number of IEEE 802.1Q VLANs that are configured in this device.
1.3.6.1.4.1.6141.2.4.1.2.4Unsigned32read-onlycurrent
wwpVlanTable
OBJECT-TYPE
VLAN table
1.3.6.1.4.1.6141.2.4.1.2.5not-accessiblecurrent
wwpVlanEntry
OBJECT-TYPE
table of VLANs
1.3.6.1.4.1.6141.2.4.1.2.5.1not-accessiblecurrent
wwpVlanId
OBJECT-TYPE
802.1Q VLAN ID (1-4094)
1.3.6.1.4.1.6141.2.4.1.2.5.1.1VlanIdread-onlycurrent
wwpVlanName
OBJECT-TYPE
Name associated with this VLAN.
1.3.6.1.4.1.6141.2.4.1.2.5.1.2DisplayString (SIZE(0..32))read-createcurrent
wwpVlanCurrentEgressPorts
OBJECT-TYPE
The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
1.3.6.1.4.1.6141.2.4.1.2.5.1.3PortListread-writecurrent
wwpVlanCurrentUntaggedPorts
OBJECT-TYPE
The set of ports which are transmitting traffic for this VLAN as untagged frames.
1.3.6.1.4.1.6141.2.4.1.2.5.1.4PortListread-onlycurrent
wwpVlanMgmtStatus
OBJECT-TYPE
Indicates if this VLAN is a management VLAN. The system can have at most one remote management VLAN, and one local management VLAN. Any VLAN can be set either to remoteMgmtVlan or localMgmtvlan.
1.3.6.1.4.1.6141.2.4.1.2.5.1.5INTEGER {notMgmtVlan(0), remoteMgmtVlan(1), localMgmtVlan(2)}read-writecurrent
wwpVlanRowStatus
OBJECT-TYPE
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, there should not be any port associated with this VLAN.
1.3.6.1.4.1.6141.2.4.1.2.5.1.6RowStatusread-writecurrent
wwpVlanXTable
OBJECT-TYPE
Extension of the VLAN table
1.3.6.1.4.1.6141.2.4.1.2.6not-accessiblecurrent
wwpVlanXEntry
OBJECT-TYPE
Entry in the extended VLAN table.
1.3.6.1.4.1.6141.2.4.1.2.6.1not-accessiblecurrent
wwpVlanTunnel
OBJECT-TYPE
Enable/disable VLAN tunneling on this VLAN.
1.3.6.1.4.1.6141.2.4.1.2.6.1.1INTEGER {disable(0), enable(1)}read-writecurrent
wwpExtBridgeMIBNotificationPrefix
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.2
wwpExtBridgeMIBNotifications
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.2.0
wwpExtBridgeMIBConformance
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.3
wwpExtBridgeMIBCompliances
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.3.1
wwpExtBridgeMIBGroups
OBJECT-IDENTITY
1.3.6.1.4.1.6141.2.4.3.2