MIBs Depot

WRED-MIB

Registered at
1.3.6.1.4.1.171.12.31
Last updated
1911-09-30 00:00
Organization
D-Link Corp.
Namespace
dlink
Source file
WRED-MIB
Digest
sha256:15502df18f84eb8a83b50d7e426c6cb6d05b8a86daa2251035557de57e9cfb09

Description

.

Contact

http://support.dlink.com

Imports

FromSymbols
DLINK-ID-REC-MIBdlink-common-mgmt
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIMODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso
SNMPv2-TCDisplayString, RowStatus, TEXTUAL-CONVENTION

Imported by

Nothing in this corpus imports this module.

Load order

Every file a consumer needs in order to load this module, dependencies first.

DLINK-ID-REC-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WRED-MIB

Objects

NameOIDSyntaxAccessStatus
swWredCtrl
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.31.1
swWredGlobalState
OBJECT-TYPE
This object enable\disable the WRED state of the device.
1.3.6.1.4.1.171.12.31.1.1INTEGER {other(1), disabled(2), enabled(3)}read-writecurrent
swWredInfo
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.31.2
swWredMgmt
OBJECT-IDENTITY
1.3.6.1.4.1.171.12.31.3
swWredAverageTimeTable
OBJECT-TYPE
A table that contains WRED average time for each port.
1.3.6.1.4.1.171.12.31.3.1not-accessiblecurrent
swWredAverageTimeEntry
OBJECT-TYPE
A list that contains WRED average time per port.
1.3.6.1.4.1.171.12.31.3.1.1not-accessiblecurrent
swWredPortIndex
OBJECT-TYPE
This object indicates the port number.
1.3.6.1.4.1.171.12.31.3.1.1.1INTEGER (1..65535)read-onlycurrent
swWredAverageTime
OBJECT-TYPE
This object indicates the time in microseconds used in average queue depth calculation (1-32768).
1.3.6.1.4.1.171.12.31.3.1.1.2INTEGER (1..32768)read-writecurrent
swWredCtrlTable
OBJECT-TYPE
A table that contains WRED drop setting for each port.
1.3.6.1.4.1.171.12.31.3.2not-accessiblecurrent
swWredCtrlEntry
OBJECT-TYPE
A list that contains WRED drop setting per port.
1.3.6.1.4.1.171.12.31.3.2.1not-accessiblecurrent
swWredCtrlPortIndex
OBJECT-TYPE
This object indicates the port number.
1.3.6.1.4.1.171.12.31.3.2.1.1INTEGER (1..65535)read-onlycurrent
swWredCtrlClassIndex
OBJECT-TYPE
This object indicates the cos queue number (0-7).
1.3.6.1.4.1.171.12.31.3.2.1.2INTEGER (0..7)read-onlycurrent
swWredCtrlDropStart
OBJECT-TYPE
This object indicates the percentage of queue size to start dropping (0-100).
1.3.6.1.4.1.171.12.31.3.2.1.3INTEGER (0..100)read-writecurrent
swWredCtrlDropSlope
OBJECT-TYPE
This object indicates the Degrees (0..90) describing the drop probability slope (0-90). When set the slope zero, it like disable the wred of the cos queue.
1.3.6.1.4.1.171.12.31.3.2.1.4INTEGER (0..90)read-writecurrent
swWredAllPortAverageTime
OBJECT-TYPE
This object configure the time in microseconds used in average queue depth calculation (1-32768) to all port. This return value while read request will be always 0.
1.3.6.1.4.1.171.12.31.3.3INTEGER (0..32768)read-writecurrent
swWredProfileTable
OBJECT-TYPE
A table that contains WRED Profile Entrys.
1.3.6.1.4.1.171.12.31.3.4not-accessiblecurrent
swWredProfileEntry
OBJECT-TYPE
A list that contains WRED profile entrys.
1.3.6.1.4.1.171.12.31.3.4.1not-accessiblecurrent
swWredProfileIndex
OBJECT-TYPE
This object indicates the profile number,the minimum value should be 2 and the maximum value is depended on project.
1.3.6.1.4.1.171.12.31.3.4.1.1INTEGERread-onlycurrent
swWredProfileName
OBJECT-TYPE
This object indicates the profile name,The profile name can not be same.
1.3.6.1.4.1.171.12.31.3.4.1.2DisplayStringread-createcurrent
swWredProfileRowStatus
OBJECT-TYPE
This object indicates the status of this entry.
1.3.6.1.4.1.171.12.31.3.4.1.3RowStatusread-createcurrent
swWredProfileCfgTable
OBJECT-TYPE
A table that contains WRED profile every parameter.
1.3.6.1.4.1.171.12.31.3.5not-accessiblecurrent
swWredProfileCfgEntry
OBJECT-TYPE
A list that contains WRED profile parameter for each profile.
1.3.6.1.4.1.171.12.31.3.5.1not-accessiblecurrent
swWredProfileCfgIndex
OBJECT-TYPE
This object indicates the profile number.
1.3.6.1.4.1.171.12.31.3.5.1.1INTEGER (1..128)read-onlycurrent
swWredProfileCfgPacketType
OBJECT-TYPE
This object indicates the profile packet type.
1.3.6.1.4.1.171.12.31.3.5.1.2INTEGER {tcp(1), nonTcp(2)}read-onlycurrent
swWredProfileCfgPacketColor
OBJECT-TYPE
This object indicates the profile packet color.
1.3.6.1.4.1.171.12.31.3.5.1.3INTEGER {green(1), yellow(2), red(3)}read-onlycurrent
swWredProfileCfgMinThreshold
OBJECT-TYPE
This object indicates the percentage of queue size to start dropping (0-100).
1.3.6.1.4.1.171.12.31.3.5.1.4INTEGER (0..100)read-writecurrent
swWredProfileCfgMaxThreshold
OBJECT-TYPE
This object indicates the percentage of queue size over which WRED will drop all packets (0-100).
1.3.6.1.4.1.171.12.31.3.5.1.5INTEGER (0..100)read-writecurrent
swWredProfileCfgMaxDropRate
OBJECT-TYPE
This object indicates the drop probability that the percentage of queue size reaches max threshold.
1.3.6.1.4.1.171.12.31.3.5.1.6INTEGER (0..100)read-writecurrent
swWredPortProfileTable
OBJECT-TYPE
A table that contains ports WRED profile binded.
1.3.6.1.4.1.171.12.31.3.6not-accessiblecurrent
swWredPortProfileEntry
OBJECT-TYPE
A list that contains port and WRED profile id.
1.3.6.1.4.1.171.12.31.3.6.1not-accessiblecurrent
swWredPortProfilePortIndex
OBJECT-TYPE
This object indicates the port number.
1.3.6.1.4.1.171.12.31.3.6.1.1INTEGER (1..65535)read-onlycurrent
swWredPortProfileClassIndex
OBJECT-TYPE
This object indicates the hardware priority queue number (0-7).
1.3.6.1.4.1.171.12.31.3.6.1.2INTEGER (0..7)read-onlycurrent
swWredPortProfileId
OBJECT-TYPE
This object indicates profile ID that port and queue binded, the minimum value should be 1 and the maximum is depended on project.
1.3.6.1.4.1.171.12.31.3.6.1.3INTEGERread-writecurrent
swWredPortWeightNum
OBJECT-TYPE
This object indicates weight number that port and queue set, the minimum value should be 1 and the maximum is depended on project.
1.3.6.1.4.1.171.12.31.3.6.1.4INTEGERread-writecurrent