MIBs Depot

WLSX-SWITCH-MIB

Registered at
1.3.6.1.4.1.14823.2.2.1.1
Last updated
2020-08-14 17:45
Organization
Aruba, a Hewlett Packard Enterprise company
Revisions
2020-08-14 17:45
Namespace
arubaos
Source file
WLSX-SWITCH-MIB
Digest
sha256:7e20396623ea8d728ff96b2efcf1cd5074c6708a70dc2cfa4d23970fab478e6c

Description

This MIB module defines MIB objects which provide System level information about the Aruba switches.

Contact

Postal: 3333 Scott Blvd, Santa Clara, CA 95054 E-mail: aruba-ext-eng-reg@hpe.com Phone: 408 227 4500 Fax: 408 752 0626

Imports

FromSymbols
ARUBA-MIBwlsxEnterpriseMibModules
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMICounter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, snmpModules
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TAddress, TDomain, TEXTUAL-CONVENTION, TestAndIncr, TimeInterval, TruthValue

Imported by

1 module(s) in this corpus import this one.

Load order

Every file a consumer needs in order to load this module, dependencies first.

ARUBA-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
WLSX-SWITCH-MIB

Under this module's arcs

Where the registration tree carries on below this module.

ArcNameModule
1.3.6.1.4.1.14823.2.2.1.1.4wlsxUser6InfoGroupWLSX-USER6-MIB

Objects

NameOIDSyntaxAccessStatus
wlsxSystemXGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.2.1.1.1
wlsxHostname
OBJECT-TYPE
Name of the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.1DisplayString (SIZE(1..32))read-onlycurrent
wlsxModelName
OBJECT-TYPE
Model Name of the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.2DisplayString (SIZE(1..32))read-onlycurrent
wlsxSwitchIp
OBJECT-TYPE
Switch IP as configured by the user. This IP address uniquely identifies the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.3IpAddressread-onlycurrent
wlsxSwitchRole
OBJECT-TYPE
Role of this switch in the Switch Domain.
1.3.6.1.4.1.14823.2.2.1.1.1.4INTEGER {master(1), local(2), standbymaster(3), branch(4), md(5)}read-onlycurrent
wlsxSwitchMasterIp
OBJECT-TYPE
Master IP of the switch
1.3.6.1.4.1.14823.2.2.1.1.1.5IpAddressread-onlycurrent
wlsxSwitchListTable
OBJECT-TYPE
This Table will list all the switches in the Switch Domain. It will be populated only on the master switch. Local switches return empty table.
1.3.6.1.4.1.14823.2.2.1.1.1.6not-accessiblecurrent
wlsxSwitchListEntry
OBJECT-TYPE
Switch List Entry
1.3.6.1.4.1.14823.2.2.1.1.1.6.1not-accessiblecurrent
switchListSwitchIPAddress
OBJECT-TYPE
IP Address of the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1IpAddressnot-accessiblecurrent
switchListSwitchRole
OBJECT-TYPE
Role of the Switch.
1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2INTEGER {master(1), local(2), standbymaster(3), branch(4), md(5)}read-onlycurrent
wlsxSwitchLicenseCount
OBJECT-TYPE
The number of licenses installed on the switch
1.3.6.1.4.1.14823.2.2.1.1.1.7Integer32read-onlycurrent
wlsxSwitchLicenseTable
OBJECT-TYPE
This table lists all licenses installed on the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.8not-accessiblecurrent
wlsxLicenseEntry
OBJECT-TYPE
License Entry
1.3.6.1.4.1.14823.2.2.1.1.1.8.1not-accessiblecurrent
licenseIndex
OBJECT-TYPE
License ID number
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1Integer32not-accessiblecurrent
licenseKey
OBJECT-TYPE
License Key
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2DisplayStringread-onlycurrent
licenseInstalled
OBJECT-TYPE
License installation time
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3DisplayStringread-onlycurrent
licenseExpires
OBJECT-TYPE
License expiry time
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4DisplayStringread-onlycurrent
licenseFlags
OBJECT-TYPE
License flags; E - enabled; A - auto-generated; R - reboot required to activate
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5DisplayStringread-onlycurrent
licenseService
OBJECT-TYPE
The service enabled by this license.
1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6DisplayStringread-onlycurrent
wlsxSysXProcessorTable
OBJECT-TYPE
The table of processors contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.9not-accessiblecurrent
wlsxSysXProcessorEntry
OBJECT-TYPE
An entry for one processor contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1not-accessiblecurrent
sysXProcessorID
OBJECT-TYPE
Processor Index.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1Integer32not-accessiblecurrent
sysXProcessorDescr
OBJECT-TYPE
description of the processor.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2DisplayString (SIZE(0..64))read-onlycurrent
sysXProcessorLoad
OBJECT-TYPE
The average, over the last minute, of the percentage of time that this processor was not idle.
1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3Integer32 (0..100)read-onlycurrent
wlsxSysXStorageTable
OBJECT-TYPE
The table of Storage-devices contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.10not-accessiblecurrent
wlsxSysXStorageEntry
OBJECT-TYPE
An entry for one long-term storage device contained by the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1not-accessiblecurrent
sysXStorageIndex
OBJECT-TYPE
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1Integer32not-accessiblecurrent
sysXStorageType
OBJECT-TYPE
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2INTEGER {ram(1), flashMemory(2)}read-onlycurrent
sysXStorageSize
OBJECT-TYPE
size of the storage filesystem in MB.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3Integer32read-onlycurrent
sysXStorageUsed
OBJECT-TYPE
size of the storage filesystem in MB.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4Integer32read-onlycurrent
sysXStorageName
OBJECT-TYPE
name of the storage filesystem.
1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5DisplayString (SIZE(0..64))read-onlycurrent
wlsxSysXMemoryTable
OBJECT-TYPE
The memory status of the switch
1.3.6.1.4.1.14823.2.2.1.1.1.11not-accessiblecurrent
wlsxSysXMemoryEntry
OBJECT-TYPE
An entry for one memory region on the switch. Currently, only the CP region is monitored.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1not-accessiblecurrent
sysXMemoryIndex
OBJECT-TYPE
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1Integer32not-accessiblecurrent
sysXMemorySize
OBJECT-TYPE
Total memory in KB.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2Integer32read-onlycurrent
sysXMemoryUsed
OBJECT-TYPE
Used memory in KB.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3Integer32read-onlycurrent
sysXMemoryFree
OBJECT-TYPE
Free memory in KB.
1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4Integer32read-onlycurrent
wlsxSwitchLicenseSerialNumber
OBJECT-TYPE
The license serial number of the switch
1.3.6.1.4.1.14823.2.2.1.1.1.12DisplayStringread-onlycurrent
wlsxSwitchIpv6
OBJECT-TYPE
Switch IPv6 as configured by the user. This IPv6 address uniquely identifies the switch.
1.3.6.1.4.1.14823.2.2.1.1.1.13DisplayString (SIZE(0..128))read-onlycurrent
wlsxSwitchMasterIpv6
OBJECT-TYPE
Master IPv6 address of the switch
1.3.6.1.4.1.14823.2.2.1.1.1.14DisplayString (SIZE(0..45))read-onlycurrent
wlsxUserInfoGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.2.1.1.2
wlsxSwitchUserTable
OBJECT-TYPE
This Table lists all the users (both wired and wireless) currently connected to the switch. Users are identified by their IP address.
1.3.6.1.4.1.14823.2.2.1.1.2.1not-accessiblecurrent
wlsxSwitchUserEntry
OBJECT-TYPE
User Entry
1.3.6.1.4.1.14823.2.2.1.1.2.1.1not-accessiblecurrent
userIpAddress
OBJECT-TYPE
IP Address from which the user connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1IpAddressnot-accessiblecurrent
userPhyAddress
OBJECT-TYPE
Physical Address of the station from which the user connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2MacAddressread-onlycurrent
userName
OBJECT-TYPE
Name of the User.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3DisplayString (SIZE(0..32))read-onlycurrent
userRole
OBJECT-TYPE
The Role configured for this user.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4DisplayString (SIZE(0..64))read-onlycurrent
userUpTime
OBJECT-TYPE
Time since the user is connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5TimeTicksread-onlycurrent
userAuthenticationMethod
OBJECT-TYPE
Authentication mechanism used by the user to connect to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6INTEGER {none(1), other(2), web(3), dot1x(4), vpn(5), mac(6)}read-onlycurrent
userLocation
OBJECT-TYPE
Location of the access point (in Building.Floor.... format), which the user used to connect to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7DisplayString (SIZE(0..32))read-onlycurrent
userServerName
OBJECT-TYPE
Name of the Back-end authentication server, used to authenticate the user.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8DisplayString (SIZE(0..32))read-onlycurrent
userConnectedVlan
OBJECT-TYPE
Vlan on which the user is connected to the switch.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9Integer32read-onlycurrent
userConnectedSlot
OBJECT-TYPE
Slot on switch, where the user connection terminates.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10Integer32read-onlycurrent
userConnectedPort
OBJECT-TYPE
Port on switch, where the user connection terminates.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11Integer32read-onlycurrent
userBWContractName
OBJECT-TYPE
Name of the Bandwidth Contract applied to this user.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12DisplayString (SIZE(0..32))read-onlycurrent
userBWContractUsage
OBJECT-TYPE
Indicates how the Bandwidth Contract is used.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13INTEGER {user(1), shared(2)}read-onlycurrent
userConnectedModule
OBJECT-TYPE
The module to which the user is connected, if wired.
1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14Integer32read-onlycurrent
wlsxSwitchStationMgmtTable
OBJECT-TYPE
This Table lists all the wireless stations associated with the Access points connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.2.2not-accessiblecurrent
wlsxSwitchStationMgmtEntry
OBJECT-TYPE
Station Management Entry
1.3.6.1.4.1.14823.2.2.1.1.2.2.1not-accessiblecurrent
staPhyAddress
OBJECT-TYPE
The Physical Address of the Station.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1MacAddressnot-accessiblecurrent
staAccessPointBSSID
OBJECT-TYPE
BSSID of the Access point through which the station is connected to the switch
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2MacAddressnot-accessiblecurrent
staUserName
OBJECT-TYPE
Name of the User connecting from this station.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3DisplayString (SIZE(0..32))read-onlycurrent
staUserRole
OBJECT-TYPE
User Role.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4DisplayString (SIZE(0..32))read-onlycurrent
staAssociationID
OBJECT-TYPE
AID with which the Station is associated with this system.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5Unsigned32read-onlycurrent
staAccessPointESSID
OBJECT-TYPE
ESSID of the Access point
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6DisplayString (SIZE(0..64))read-onlycurrent
staSignalToNoiseRatio
OBJECT-TYPE
SNR for the BSSID.
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7Integer32read-onlycurrent
staTransmitRate
OBJECT-TYPE
Indicates Transmit rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8INTEGER {rate1Mbps(1), rate2Mbps(2), rate5point5Mbps(3), rate6Mbps(4), rate9Mbps(5), rate11Mbps(6), rate12Mbps(7), rate18Mbps(8), rate24Mbps(9), rate36Mbps(10), rate48Mbps(11), rate54Mbps(12)}read-onlycurrent
staReceiveRate
OBJECT-TYPE
Indicates Receive rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9INTEGER {rate1Mbps(1), rate2Mbps(2), rate5point5Mbps(3), rate6Mbps(4), rate9Mbps(5), rate11Mbps(6), rate12Mbps(7), rate18Mbps(8), rate24Mbps(9), rate36Mbps(10), rate48Mbps(11), rate54Mbps(12)}read-onlycurrent
wlsxSwitchStationStatsTable
OBJECT-TYPE
This Table lists the statistics of all the wireless stations associated with the Access points connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.2.3not-accessiblecurrent
wlsxSwitchStationStatsEntry
OBJECT-TYPE
Station Statistics Entry
1.3.6.1.4.1.14823.2.2.1.1.2.3.1not-accessiblecurrent
staTxPackets
OBJECT-TYPE
Total Packets Transmitted by the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1Counter32read-onlycurrent
staTxBytes
OBJECT-TYPE
Total Bytes Transmitted by the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2Counter32read-onlycurrent
staRxPackets
OBJECT-TYPE
Total Packets Received by the Station
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3Counter32read-onlycurrent
staRxBytes
OBJECT-TYPE
Total Bytes Received by the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4Counter32read-onlycurrent
staBwRate
OBJECT-TYPE
Bandwidth Rate in Kbps of the station.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5Integer32read-onlycurrent
staFrameRetryRate
OBJECT-TYPE
Station Frame Retry Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6Integer32read-onlycurrent
staFrameLowSpeedRate
OBJECT-TYPE
Station Frame Low Speed Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7Integer32read-onlycurrent
staFrameNonUnicastRate
OBJECT-TYPE
Station Frame Non Unicast Packet Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8Integer32read-onlycurrent
staFrameFragmentationRate
OBJECT-TYPE
Station Frame Fragmentation Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9Integer32read-onlycurrent
staFrameReceiveErrorRate
OBJECT-TYPE
Station Frame Receive Error Rate.
1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10Integer32read-onlycurrent
wlsxAccessPointInfoGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.2.1.1.3
wlsxSwitchTotalNumAccessPoints
OBJECT-TYPE
Total Number of Access Points Connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.1Unsigned32read-onlycurrent
wlsxSwitchTotalNumStationsAssociated
OBJECT-TYPE
Total Number of Stations Associated to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.2Unsigned32read-onlycurrent
wlsxSwitchAccessPointTable
OBJECT-TYPE
This Table lists all the Access Points Connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.3not-accessiblecurrent
wlsxSwitchAccessPointEntry
OBJECT-TYPE
Station Management Entry
1.3.6.1.4.1.14823.2.2.1.1.3.3.1not-accessiblecurrent
apBSSID
OBJECT-TYPE
The Physical Address of the Access Point.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1MacAddressnot-accessiblecurrent
apESSID
OBJECT-TYPE
ESSID of the Access Point
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2DisplayString (SIZE(0..64))read-onlycurrent
apSlot
OBJECT-TYPE
Slot to which the Access Point is connected.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3Unsigned32read-onlycurrent
apPort
OBJECT-TYPE
Port to which the Access Point is connected.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4Unsigned32read-onlycurrent
apIpAddress
OBJECT-TYPE
Address of the Access Point.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5IpAddressread-onlycurrent
apPhyType
OBJECT-TYPE
Physical Layer Protocol support of the AP.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6INTEGER {dot11a(1), dot11b(2), dot11g(3)}read-onlycurrent
apType
OBJECT-TYPE
Indicates whether the Access point is an Air Monitor or regular AP.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7INTEGER {ap(1), am(2)}read-onlycurrent
apCurrentChannel
OBJECT-TYPE
The Current Operating frequency channel.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8INTEGER (1..165)read-onlycurrent
apLocation
OBJECT-TYPE
Location of the AP defined in Building.Floor.... mode.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9DisplayString (SIZE(0..32))read-onlycurrent
apTotalTime
OBJECT-TYPE
Time since the Ap is connected to the switch
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10TimeTicksread-onlycurrent
apInactiveTime
OBJECT-TYPE
Time since the Ap has been inactive
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11TimeTicksread-onlycurrent
apLoadBalancing
OBJECT-TYPE
Indicates whether Load balancing is enabled or not.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12TruthValueread-onlycurrent
apChannelNoise
OBJECT-TYPE
Indicates the noise on the channel
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13Integer32read-onlycurrent
apSignalToNoiseRatio
OBJECT-TYPE
SNR for the BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14Integer32read-onlycurrent
apTransmitRate
OBJECT-TYPE
Indicates Transmit rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15INTEGER {rate1Mbps(1), rate2Mbps(2), rate5point5Mbps(3), rate6Mbps(4), rate9Mbps(5), rate11Mbps(6), rate12Mbps(7), rate18Mbps(8), rate24Mbps(9), rate36Mbps(10), rate48Mbps(11), rate54Mbps(12)}read-onlycurrent
apReceiveRate
OBJECT-TYPE
Indicates Receive rate of the channel
1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16INTEGER {rate1Mbps(1), rate2Mbps(2), rate5point5Mbps(3), rate6Mbps(4), rate9Mbps(5), rate11Mbps(6), rate12Mbps(7), rate18Mbps(8), rate24Mbps(9), rate36Mbps(10), rate48Mbps(11), rate54Mbps(12)}read-onlycurrent
wlsxSwitchGlobalAPTable
OBJECT-TYPE
This Table lists all the Access Points Connected in the Switch Domain. This table is valid only on a Master switch. On a Local switch, the table is empty.
1.3.6.1.4.1.14823.2.2.1.1.3.4not-accessibledeprecated
wlsxSwitchGlobalAPEntry
OBJECT-TYPE
Station Management Entry
1.3.6.1.4.1.14823.2.2.1.1.3.4.1not-accessibledeprecated
globalAPLocation
OBJECT-TYPE
Physical Location of the AP, defined in Building.Floor.Location format.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1DisplayString (SIZE(0..32))not-accessibledeprecated
globalAPAddress
OBJECT-TYPE
Address of the Access Point.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2IpAddressnot-accessibledeprecated
globalAPLocalSwitch
OBJECT-TYPE
IP Address of the Local Switch this Access Point is connected to.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3IpAddressread-onlydeprecated
globalAPdot11aPhyAddr
OBJECT-TYPE
Physical Mac address of the module supporting dot11a in the Access Point. AP can have support for both dot11a and dot11b physical layer.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4MacAddressread-onlydeprecated
globalAPdot11bPhyAddr
OBJECT-TYPE
Physical Mac address of the module supporting dot11b in the Access Point. AP can have support for both dot11a and dot11b physical layer.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5MacAddressread-onlydeprecated
globalAPState
OBJECT-TYPE
State of the AP. 1 -- AP is UP. 2 -- AP is DOWN. 3-7 -- Values are deprecated.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6INTEGER (1..7)read-onlydeprecated
globalAPdot11gPhyAddr
OBJECT-TYPE
Physical Mac address of the module supporting dot11g in the Access Point. AP can have support for both a,b,g physical layer.
1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7MacAddressread-onlydeprecated
wlsxSwitchAccessPointStatsTable
OBJECT-TYPE
This Table lists the statistics of all the Access Points Connected to this switch.
1.3.6.1.4.1.14823.2.2.1.1.3.5not-accessiblecurrent
wlsxSwitchAccessPointStatsEntry
OBJECT-TYPE
Ap Stats Entry.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1not-accessiblecurrent
apStatsChannel
OBJECT-TYPE
Channel on which the ap is operating.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1INTEGER (1..165)read-onlycurrent
apChannelBwRate
OBJECT-TYPE
Bandwidth Rate in Kbps of the apChannel.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2Integer32read-onlycurrent
apChannelFrameRetryRate
OBJECT-TYPE
Ap Channel Frame Retry Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3Integer32read-onlycurrent
apChannelFrameLowSpeedRate
OBJECT-TYPE
Ap Channel Frame Low Speed Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4Integer32read-onlycurrent
apChannelFrameNonUnicastRate
OBJECT-TYPE
Ap Channel Frame Non Unicast Packet Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5Integer32read-onlycurrent
apChannelFrameFragmentationRate
OBJECT-TYPE
Ap Channel Frame Fragmentation Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6Integer32read-onlycurrent
apChannelFrameReceiveErrorRate
OBJECT-TYPE
Ap Channel Frame Receive Error Rate.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7Integer32read-onlycurrent
apBSSTxPackets
OBJECT-TYPE
Total Packets Transmitted by the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8Counter32read-onlycurrent
apBSSTxBytes
OBJECT-TYPE
Total Bytes Transmitted by the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9Counter32read-onlycurrent
apBSSRxPackets
OBJECT-TYPE
Total Packets Received by the ap on this BSSID
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10Counter32read-onlycurrent
apBSSRxBytes
OBJECT-TYPE
Total Bytes Received by the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11Counter32read-onlycurrent
apBSSBwRate
OBJECT-TYPE
Bandwidth Rate in Kbps of the ap on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12Integer32read-onlycurrent
apBSSFrameRetryRate
OBJECT-TYPE
Frame Retry Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13Integer32read-onlycurrent
apBSSFrameLowSpeedRate
OBJECT-TYPE
Frame Low Speed Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14Integer32read-onlycurrent
apBSSFrameNonUnicastRate
OBJECT-TYPE
Frame Non Unicast Packet Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15Integer32read-onlycurrent
apBSSFrameFragmentationRate
OBJECT-TYPE
Frame Fragmentation Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16Integer32read-onlycurrent
apBSSFrameReceiveErrorRate
OBJECT-TYPE
Frame Receive Error Rate on this BSSID.
1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17Integer32read-onlycurrent
wlsxInstantAccessPointInfoGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.2.1.1.5
wlsxIapTotalNumBranches
OBJECT-TYPE
Total number of branches in IAP
1.3.6.1.4.1.14823.2.2.1.1.5.1Integer32read-onlycurrent
wlsxIapTotalNumBranchesUp
OBJECT-TYPE
Total number of branches with status Up.
1.3.6.1.4.1.14823.2.2.1.1.5.2Integer32read-onlycurrent
wlsxIapTotalNumBranchesDown
OBJECT-TYPE
Total number of branches with status Down
1.3.6.1.4.1.14823.2.2.1.1.5.3Integer32read-onlycurrent
wlsxIapBranchTable
OBJECT-TYPE
This table lists all the information related to IAP branches.
1.3.6.1.4.1.14823.2.2.1.1.5.4not-accessiblecurrent
wlsxIapBranchEntry
OBJECT-TYPE
IAP branch entry
1.3.6.1.4.1.14823.2.2.1.1.5.4.1not-accessiblecurrent
iapBranchKey
OBJECT-TYPE
Key of the IAP branch.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.1DisplayString (SIZE(65))read-onlycurrent
iapBranchName
OBJECT-TYPE
Name of the IAP branch.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.2DisplayString (SIZE(0..129))read-onlycurrent
iapBranchVcMacAddress
OBJECT-TYPE
MAC address of the Virtual Controller of the branch.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.3MacAddressnot-accessiblecurrent
iapBranchStatus
OBJECT-TYPE
Current status of the branch
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.4INTEGER {up(1), down(2)}read-onlycurrent
iapBranchInnerIpAddressType
OBJECT-TYPE
Inner IP Address type IPv4 or IPv6 of the branch.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.5INTEGER {ipv4(1), ipv6(2)}read-onlycurrent
iapBranchInnerIpAddress
OBJECT-TYPE
Inner IPv4/IPv6 Address of the branch.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.6DisplayString (SIZE(0..45))read-onlycurrent
iapBranchAssignedSubnet
OBJECT-TYPE
Assigned subnets of the branch.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.7DisplayStringread-onlycurrent
iapBranchAssignedVlan
OBJECT-TYPE
Assigned vlans of the branch. A string of octets containing one bit per VLAN for a total of 4096 VLANs in the management domain. The most significant bit of the octet string is the lowest value VLAN of 4096 VLANs. By setting the bit(1) we indicate that the vlan is part of the assigned vlans. The most significant bit of the bitmap is transmitted first. Note that if the length of this string is less than 512 octets, any 'missing' octets are assumed to contain the value zero.
1.3.6.1.4.1.14823.2.2.1.1.5.4.1.8OCTET STRINGread-onlycurrent
wlsxSwitchTraps
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.2.1.1.100
wlsxSwitchTrapObjectsGroup
OBJECT-IDENTITY
1.3.6.1.4.1.14823.2.2.1.1.100.100
wlsxAuthServerName
OBJECT-TYPE
This Object is used in the traps to indicate the Authentication Server, used for Authentication.
1.3.6.1.4.1.14823.2.2.1.1.100.100.1DisplayString (SIZE(0..64))read-onlycurrent
wlsxAuthServerTimeout
OBJECT-TYPE
This Object is used in the traps to indicate the Authentication Server Timeout.
1.3.6.1.4.1.14823.2.2.1.1.100.100.2Integer32read-onlycurrent
wlsxFanNumber
OBJECT-TYPE
This Object is used in the traps to indicate a failing fan number.
1.3.6.1.4.1.14823.2.2.1.1.100.100.4Integer32read-onlycurrent
wlsxLineCardNumber
OBJECT-TYPE
This Object is used in the traps to indicate a Line Card in the switch.
1.3.6.1.4.1.14823.2.2.1.1.100.100.5Integer32read-onlycurrent
wlsxVoltageType
OBJECT-TYPE
This Object is used in the traps to indicate the type of the voltage.
1.3.6.1.4.1.14823.2.2.1.1.100.100.6DisplayString (SIZE(0..32))read-onlycurrent
wlsxVoltageValue
OBJECT-TYPE
This Object is used in the traps to indicate the voltage value in Float.
1.3.6.1.4.1.14823.2.2.1.1.100.100.7DisplayString (SIZE(0..10))read-onlycurrent
wlsxTemperatureValue
OBJECT-TYPE
This Object is used in the traps to indicate Temperature Value.
1.3.6.1.4.1.14823.2.2.1.1.100.100.8DisplayString (SIZE(0..64))read-onlycurrent
wlsxProcessName
OBJECT-TYPE
This Object is used in the traps to indicate a process name.
1.3.6.1.4.1.14823.2.2.1.1.100.100.9DisplayString (SIZE(0..64))read-onlycurrent
wlsxStationMacAddress
OBJECT-TYPE
The Physical Address of the Station.
1.3.6.1.4.1.14823.2.2.1.1.100.100.10MacAddressread-onlycurrent
wlsxStationBlackListReason
OBJECT-TYPE
The Reason for which a station is black listed.
1.3.6.1.4.1.14823.2.2.1.1.100.100.11INTEGER {userDefined(1), mitmAttack(2), authFailure(3), pingFlood(4), sessionFlood(5), synFlood(6), sessionBlacklist(7), ipSpoofing(8), other(100)}read-onlycurrent
wlsxSpoofedIpAddress
OBJECT-TYPE
This Object is used in a trap to identify a Spoofed IP Address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.12IpAddressread-onlycurrent
wlsxSpoofedOldPhyAddress
OBJECT-TYPE
This Object is used in a trap to identify a Old Mac Address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.13MacAddressread-onlycurrent
wlsxSpoofedNewPhyAddress
OBJECT-TYPE
This Object is used in a trap to identify a New Mac Address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.14MacAddressread-onlycurrent
wlsxDBName
OBJECT-TYPE
This Object is used in a trap to identify name of the Database.
1.3.6.1.4.1.14823.2.2.1.1.100.100.15DisplayString (SIZE(0..64))read-onlycurrent
wlsxDBUserName
OBJECT-TYPE
This Object is used in a trap to identify name of the Database user.
1.3.6.1.4.1.14823.2.2.1.1.100.100.16DisplayString (SIZE(0..64))read-onlycurrent
wlsxDBIpAddress
OBJECT-TYPE
This Object is used in a trap to identify the IpAddress of the DB.
1.3.6.1.4.1.14823.2.2.1.1.100.100.17IpAddressread-onlycurrent
wlsxDBType
OBJECT-TYPE
This Object is used in a trap to identify the Port of the user.
1.3.6.1.4.1.14823.2.2.1.1.100.100.18INTEGER {mssql(1), mysql(2)}read-onlycurrent
wlsxVrID
OBJECT-TYPE
This Object contains the Virtual Router Identifier.
1.3.6.1.4.1.14823.2.2.1.1.100.100.19Integer32read-onlycurrent
wlsxVrMasterIp
OBJECT-TYPE
This Object contains the Master IP address.
1.3.6.1.4.1.14823.2.2.1.1.100.100.20IpAddressread-onlycurrent
wlsxVrrpOperState
OBJECT-TYPE
This Object represents the VRRP operational state.
1.3.6.1.4.1.14823.2.2.1.1.100.100.21INTEGER {initialize(1), backup(2), master(3)}read-onlycurrent
wlsxApTxPower
OBJECT-TYPE
This Object contains the value of the AP Transmit Power.
1.3.6.1.4.1.14823.2.2.1.1.100.100.22Integer32read-onlycurrent
wlsxESIServerGrpName
OBJECT-TYPE
This Object represents the External Services Interface (ESI) Server Group name
1.3.6.1.4.1.14823.2.2.1.1.100.100.23DisplayString (SIZE(0..64))read-onlycurrent
wlsxESIServerName
OBJECT-TYPE
This Object represents the External Services Interface (ESI) Server name
1.3.6.1.4.1.14823.2.2.1.1.100.100.24DisplayString (SIZE(0..64))read-onlycurrent
wlsxESIServerIpaddress
OBJECT-TYPE
This Object represents the External Services Interface (ESI) Server IP Address
1.3.6.1.4.1.14823.2.2.1.1.100.100.25IpAddressread-onlycurrent
wlsxLicenseDaysRemaining
OBJECT-TYPE
This Object represents number of the days remaining prior to a license expiry
1.3.6.1.4.1.14823.2.2.1.1.100.100.26Integer32read-onlycurrent
wlsxSlotNumber
OBJECT-TYPE
This Object is used in the traps to indicate a Line Card in the switch. This value matches the value of sysExtCardSlot.
1.3.6.1.4.1.14823.2.2.1.1.100.100.27Integer32read-onlycurrent
wlsxStationBlackListReasonStr
OBJECT-TYPE
This object is used in the traps to indicate the type of Blacklist reason.
1.3.6.1.4.1.14823.2.2.1.1.100.100.28DisplayString (SIZE(0..32))accessible-for-notifycurrent

Notifications

NameOIDStatus
wlsxSwitchIPChanged
NOTIFICATION-TYPE
A trap which indicates that the switch IP address has changed.
1.3.6.1.4.1.14823.2.2.1.1.100.1001current
wlsxSwitchRoleChange
NOTIFICATION-TYPE
A trap which indicates that the role of the switch has changed in the Domain.
1.3.6.1.4.1.14823.2.2.1.1.100.1002current
wlsxUserEntryCreated
NOTIFICATION-TYPE
A trap which indicates that a New user is created.
1.3.6.1.4.1.14823.2.2.1.1.100.1003current
wlsxUserEntryDeleted
NOTIFICATION-TYPE
A trap which indicates that a user is deleted.
1.3.6.1.4.1.14823.2.2.1.1.100.1004current
wlsxUserEntryAuthenticated
NOTIFICATION-TYPE
A trap which indicates that a user is Authenticated.
1.3.6.1.4.1.14823.2.2.1.1.100.1005current
wlsxUserEntryDeAuthenticated
NOTIFICATION-TYPE
A trap which indicates that a user is Deauthenticated.
1.3.6.1.4.1.14823.2.2.1.1.100.1006current
wlsxUserAuthenticationFailed
NOTIFICATION-TYPE
A trap which indicates that a user authentication has failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1007current
wlsxAuthServerReqTimedOut
NOTIFICATION-TYPE
A trap which indicates that the authentication server request timed out.
1.3.6.1.4.1.14823.2.2.1.1.100.1008current
wlsxAuthServerTimedOut
NOTIFICATION-TYPE
A trap which indicates that the authentication server timed out.
1.3.6.1.4.1.14823.2.2.1.1.100.1009current
wlsxAuthServerIsUp
NOTIFICATION-TYPE
A trap which indicates that the authentication server is up.
1.3.6.1.4.1.14823.2.2.1.1.100.1010current
wlsxAuthMaxUserEntries
NOTIFICATION-TYPE
A trap which indicates that the User Entries table is full and cannot add any more entries.
1.3.6.1.4.1.14823.2.2.1.1.100.1011current
wlsxAuthMaxAclEntries
NOTIFICATION-TYPE
A trap which indicates that the Acl Entries table is full and cannot add any more entries.
1.3.6.1.4.1.14823.2.2.1.1.100.1012current
wlsxAuthMaxBWContracts
NOTIFICATION-TYPE
A trap which indicates that the switch reached the maximum number of configurable Bandwidth contracts.
1.3.6.1.4.1.14823.2.2.1.1.100.1013current
wlsxPowerSupplyFailure
NOTIFICATION-TYPE
A trap which indicates that the power supply has failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1014current
wlsxFanFailure
NOTIFICATION-TYPE
A trap which indicates that the fan has failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1015current
wlsxOutOfRangeVoltage
NOTIFICATION-TYPE
A trap which indicates that the switch received out of range voltage.
1.3.6.1.4.1.14823.2.2.1.1.100.1016current
wlsxOutOfRangeTemperature
NOTIFICATION-TYPE
A trap which indicates that the Temperature is out of bounds.
1.3.6.1.4.1.14823.2.2.1.1.100.1017current
wlsxLCInserted
NOTIFICATION-TYPE
A trap which indicates that a Line card is inserted.
1.3.6.1.4.1.14823.2.2.1.1.100.1018current
wlsxSCInserted
NOTIFICATION-TYPE
A trap which indicates that a supervisory card is inserted.
1.3.6.1.4.1.14823.2.2.1.1.100.1019current
wlsxGBICInserted
NOTIFICATION-TYPE
A trap which indicates that a GBIC is inserted in a line card.
1.3.6.1.4.1.14823.2.2.1.1.100.1020current
wlsxProcessDied
NOTIFICATION-TYPE
A trap which indicates that a process has died.
1.3.6.1.4.1.14823.2.2.1.1.100.1021current
wlsxProcessExceedsMemoryLimits
NOTIFICATION-TYPE
A trap which indicates that a process is consuming large amounts of memory.
1.3.6.1.4.1.14823.2.2.1.1.100.1022current
wlsxLowOnFlashSpace
NOTIFICATION-TYPE
A trap which indicates that the switch is running low on flash space.
1.3.6.1.4.1.14823.2.2.1.1.100.1023current
wlsxLowMemory
NOTIFICATION-TYPE
A trap which indicates that the system free memory is low.
1.3.6.1.4.1.14823.2.2.1.1.100.1024current
wlsxFanTrayRemoved
NOTIFICATION-TYPE
A trap which indicates that the fan tray is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1025current
wlsxFanTrayInserted
NOTIFICATION-TYPE
A trap which indicates that the fan tray is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1026current
wlsxLCRemoved
NOTIFICATION-TYPE
A trap which indicates that a Line card is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1027current
wlsxSCRemoved
NOTIFICATION-TYPE
A trap which indicates that a supervisory card is removed.
1.3.6.1.4.1.14823.2.2.1.1.100.1028current
wlsxPowerSupplyMissing
NOTIFICATION-TYPE
A trap which indicates that the power supply is missing.
1.3.6.1.4.1.14823.2.2.1.1.100.1029current
wlsxAccessPointIsUp
NOTIFICATION-TYPE
A trap which indicates that an Access point at Location apLocation and Address apIpAddress is up.
1.3.6.1.4.1.14823.2.2.1.1.100.1030deprecated
wlsxAccessPointIsDown
NOTIFICATION-TYPE
A trap which indicates that an Access point at Location apLocation and Address apIpAddress is down.
1.3.6.1.4.1.14823.2.2.1.1.100.1031deprecated
wlsxCoverageHoleDetected
NOTIFICATION-TYPE
A trap which indicates that an Access point at Location apLocation and Address apIpAddress has detected a Coverage Hole.
1.3.6.1.4.1.14823.2.2.1.1.100.1032current
wlsxChannelChanged
NOTIFICATION-TYPE
A trap which indicates that an Access point at Location apLocation and Address apIpAddress has changed the channel to apCurrentChannel.
1.3.6.1.4.1.14823.2.2.1.1.100.1033deprecated
wlsxStationAddedToBlackList
NOTIFICATION-TYPE
A trap which indicates that a station with address wlsxStationMacAddress is black listed for wlsxStationBlackListReason reason.
1.3.6.1.4.1.14823.2.2.1.1.100.1034current
wlsxStationRemovedFromBlackList
NOTIFICATION-TYPE
A trap which indicates that a station with address wlsxStationMacAddress is removed from black list.
1.3.6.1.4.1.14823.2.2.1.1.100.1035current
wlsxIpSpoofingDetected
NOTIFICATION-TYPE
A trap indicating that the switch detected IP Spoofing.
1.3.6.1.4.1.14823.2.2.1.1.100.1036current
wlsxDBCommunicationFailure
NOTIFICATION-TYPE
A trap to indicate that communication with Database failed.
1.3.6.1.4.1.14823.2.2.1.1.100.1037current
wlsxVrrpStateChange
NOTIFICATION-TYPE
A trap which indicates that VRRP State has changed on the switch.
1.3.6.1.4.1.14823.2.2.1.1.100.1038current
wlsxAPRadioAttributesChanged
NOTIFICATION-TYPE
A trap which indicates changes in the Radio attributes of an Access Point at location apLocation and address apIpAddress. Ap channel is apCurrentChannel, and Transmit power is apTxPower.
1.3.6.1.4.1.14823.2.2.1.1.100.1039current
wlsxESIServerUp
NOTIFICATION-TYPE
A trap which indicates that a ESI server <wlsxESIServerName> in group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is up
1.3.6.1.4.1.14823.2.2.1.1.100.1040current
wlsxESIServerDown
NOTIFICATION-TYPE
A trap which indicates that a ESI server <wlsxESIServerName> in group <wlsxESIServerGrpName> with <wlsxESIServerIpaddress> is down
1.3.6.1.4.1.14823.2.2.1.1.100.1041current
wlsxLicenseExpiry
NOTIFICATION-TYPE
A trap which indicates that one or more licenses on the switch will expire in <wlsxLicenseDaysRemaining> days
1.3.6.1.4.1.14823.2.2.1.1.100.1042current
wlsxAceUsageThreshold
NOTIFICATION-TYPE
A trap which indicates that the Acl Entries table has reached eighty percent of the maximum limit.
1.3.6.1.4.1.14823.2.2.1.1.100.1043current
wlsxFanAbsent
NOTIFICATION-TYPE
A trap which indicates that the fan is absent.
1.3.6.1.4.1.14823.2.2.1.1.100.1044current
wlsxWebCCLicenseEnforcement
NOTIFICATION-TYPE
A trap which indicates that the WebCC license enforcement has been triggered.
1.3.6.1.4.1.14823.2.2.1.1.100.1045current
wlsxLowOnFlash1Space
NOTIFICATION-TYPE
A trap which indicates that the switch is running low on flash1 space.
1.3.6.1.4.1.14823.2.2.1.1.100.1046current
wlsxSwitchIPv6Changed
NOTIFICATION-TYPE
A trap which indicates that the switch IPv6 address has changed.
1.3.6.1.4.1.14823.2.2.1.1.100.1047current
wlsxDot1xThresholdLimitHit
NOTIFICATION-TYPE
A Trap which indicates that the controller is running on high optimum limit.
1.3.6.1.4.1.14823.2.2.1.1.100.1048current
wlsxDot1xTotalLimitHit
NOTIFICATION-TYPE
A Trap which indicates that the controller is running on full optimum limit.
1.3.6.1.4.1.14823.2.2.1.1.100.1049current