WLSR-AP-MIB
- Registered at
- 1.3.6.1.4.1.14823.2.3.1.1
- Last updated
- 2020-08-14 17:45
- Organization
- Aruba, a Hewlett Packard Enterprise company
- Revisions
- 2020-08-14 17:45
- Namespace
- arubaos
- Source file
WLSR-AP-MIB- Digest
sha256:86348efd3d1ab04e67eedaaa2c7a7f1dc1e89a7f9adda6efe660e1f020753956
Description
This MIB is for managing the Access Points and Air Monitors.
Contact
Postal: 3333 Scott Blvd, Santa Clara, CA 95054 E-mail: aruba-ext-eng-reg@hpe.com Phone: 408 227 4500 Fax: 408 752 0626
Imports
| From | Symbols |
|---|---|
| ARUBA-MIB | wlsrEnterpriseMibModules |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Counter32, Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, iso, snmpModules |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TAddress, TDomain, TEXTUAL-CONVENTION, TestAndIncr, TimeInterval, TruthValue |
Imported by
Nothing in this corpus imports this module.
Load order
Every file a consumer needs in order to load this module, dependencies first.
ARUBA-MIB SNMPv2-CONF SNMPv2-SMI SNMPv2-TC WLSR-AP-MIB
Objects
| Name | OID | Syntax | Access | Status |
|---|---|---|---|---|
| wlsrConfigGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.1 | |||
| wlsrConfigTable OBJECT-TYPE Table will list the configuration data of a wifi interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1 | not-accessible | current | |
| wlsrConfigEntry OBJECT-TYPE A Wifi configuration entry | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1 | not-accessible | current | |
| wlsrBSSID OBJECT-TYPE BSSID of the WIFI Interface | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.1 | MacAddress | not-accessible | current |
| wlsrESSID OBJECT-TYPE ESSID of the WIFI Interface | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.2 | DisplayString (SIZE(0..64)) | read-only | current |
| wlsrMode OBJECT-TYPE Mode of the Access Point. Master indicates that we are operating as Access Point. monitor indicates that the AP is an Air Monitor. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.3 | INTEGER {master(1), adhoc(2), monitor(3)} | read-only | current |
| wlsrCurrentChannel OBJECT-TYPE The current operating frequency channel of the DSSS PHY. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.4 | INTEGER (1..165) | read-only | current |
| wlsrTxPower OBJECT-TYPE Transmit power of the Access point. The value is between 0 ... 4 | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.5 | Integer32 | read-only | current |
| wlsrRTSThreshold OBJECT-TYPE This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.6 | INTEGER (0..2347) | read-only | current |
| wlsrRetryLimit OBJECT-TYPE This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shall be made before a failure condition is indicated. The default value of this attribute shall be 7. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.7 | INTEGER (1..255) | read-only | current |
| wlsrPreamble OBJECT-TYPE The current radio preamble type in use by the wifi interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.8 | INTEGER {short(1), long(2)} | read-only | current |
| wlsrBeaconInterval OBJECT-TYPE This object shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.9 | INTEGER (1..65535) | read-only | current |
| wlsrPowerMgmt OBJECT-TYPE This attribute indicates whether Power Management is enabled or not. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.10 | INTEGER {enable(1), disable(2)} | read-only | current |
| wlsrLoadBalance OBJECT-TYPE This attribute indicates if load balancing is enabled or disabled. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.11 | INTEGER {enable(1), disable(2)} | read-only | current |
| wlsrSupportedRates OBJECT-TYPE Basic Bit rates supported by this WIFI interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12 | Bits {unused0(0), unused1(1), unused2(2), unused3(3), rate54Mbps(4), rate48Mbps(5), rate36Mbps(6), rate24Mbps(7), rate18Mbps(8), rate12Mbps(9), rate9Mbps(10), rate6Mbps(11), rate11Mbps(12), rate5Mbps(13), rate2Mbps(14), rate1Mbps(15)} | read-only | current |
| wlsrDTIMPeriod OBJECT-TYPE This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13 | INTEGER (1..255) | read-only | current |
| wlsrLMSAddress OBJECT-TYPE This attribute indicates the IP Address of the Local switch that the AP is connected to. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14 | IpAddress | read-only | current |
| wlsrEncryption OBJECT-TYPE This attribute indicates the Encryption type of the WIFI interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15 | Bits {unused0(0), unused1(1), unused2(2), unused3(3), unused4(4), unused5(5), unused6(6), xSec(7), wpa2PreAuth(8), aes8021x(9), aesPSK(10), dynamicTkip(11), staticTkip(12), dynamicWep(13), staticWep(14), disabled(15)} | read-only | current |
| wlsrStatus OBJECT-TYPE This attribute indicates the status of the WIFI Interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17 | TruthValue | read-only | current |
| wlsrAgeout OBJECT-TYPE This attribute indicates the ageout value in seconds. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18 | Integer32 | read-only | current |
| wlsrMTU OBJECT-TYPE This attribute indicates the MTU of the WIFI Interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.19 | INTEGER (0..2347) | read-only | current |
| wlsrLocation OBJECT-TYPE This attribute indicates the Location of the Access Point in Building.Floor.location format. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.20 | DisplayString (SIZE(0..32)) | read-only | current |
| wlsrHideSSID OBJECT-TYPE This attribute indicates if SSID is hidden or not. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.21 | TruthValue | read-only | current |
| wlsrDenyBroadcast OBJECT-TYPE A True value indicates that Broadcast is disabled. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.22 | TruthValue | read-only | current |
| wlsrBGmode OBJECT-TYPE This attributes indicates the mode of the WIFI Interface | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.23 | INTEGER {bgMixed(1), bOnly(2), gOnly(3)} | read-only | current |
| wlsrCardType OBJECT-TYPE Indicates the type of the radio card. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.24 | INTEGER {noCard(1), intersil(2), atherosA(3), atherosBG(4), atherosABG(5), ar5212A(10), ar5212BG(11), ar5212ABG(12)} | read-only | current |
| wlsrRegDomain OBJECT-TYPE This Object represents the configured Regulatory Domain this AP will adhere to. 1 -- US 2 -- JAPAN 3 -- EU 4 -- EU2 5 -- EU3 6 -- KOREA 7 -- CHINA 8 -- France 9 -- Singapore 10 -- MALAY 11 -- BRAZIL 12 -- Taiwan 13 -- Czech Republic 14 -- GR 15 -- South Africa 16 -- Argentina 17 -- Australia 18 -- Chile | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.25 | Integer32 | read-only | deprecated |
| wlsrCountryCode OBJECT-TYPE This Object represents the configured Country code . | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.26 | DisplayString (SIZE(0..64)) | read-only | current |
| wlsrTxRates OBJECT-TYPE Transmit Bit rates supported by this WIFI interface. | 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.27 | Bits {unused0(0), unused1(1), unused2(2), unused3(3), rate54Mbps(4), rate48Mbps(5), rate36Mbps(6), rate24Mbps(7), rate18Mbps(8), rate12Mbps(9), rate9Mbps(10), rate6Mbps(11), rate11Mbps(12), rate5Mbps(13), rate2Mbps(14), rate1Mbps(15)} | read-only | current |
| wlsrStatsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.3 | |||
| wlsrStatsChannelGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.3.3 | |||
| wlsrChannelStatsTable OBJECT-TYPE Table contains the Channel Statistics. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1 | not-accessible | current | |
| wlsrChannelStatsEntry OBJECT-TYPE Channel Statistics Table | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1 | not-accessible | current | |
| wlsrChStatsChannel OBJECT-TYPE The frequency Channel on which these statistics are collected. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.1 | INTEGER (1..165) | not-accessible | current |
| wlsrChStatsNumAPs OBJECT-TYPE This attribute indicates the number of APs using this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.2 | Integer32 | read-only | current |
| wlsrChStatsNumStations OBJECT-TYPE This attribute indicates the number of stations using this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.3 | Integer32 | read-only | current |
| wlsrChStatsTotPkts OBJECT-TYPE This attribute indicates the total packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.4 | Counter32 | read-only | current |
| wlsrChStatsTotBytes OBJECT-TYPE This attribute indicates the total Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.5 | Counter32 | read-only | current |
| wlsrChStatsTotRetryPkts OBJECT-TYPE This attribute indicates the total Retry Packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.6 | Counter32 | read-only | current |
| wlsrChStatsTotFragmentedPkts OBJECT-TYPE This attribute indicates the total Fragmented Packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.7 | Counter32 | read-only | current |
| wlsrChStatsTotPhyErrPkts OBJECT-TYPE This attribute indicates the total Physical Error Packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8 | Counter32 | read-only | current |
| wlsrChStatsTotMacErrPkts OBJECT-TYPE This attribute indicates the total Mac errors packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9 | Counter32 | read-only | current |
| wlsrChStatsFrameErrorRate OBJECT-TYPE Frame errors as a percentage of total frames on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10 | Integer32 | read-only | current |
| wlsrChStatsFrameRetryRate OBJECT-TYPE The Frame Retry Rate | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.11 | Integer32 | read-only | current |
| wlsrChStatsFrameLowSpeedRate OBJECT-TYPE Frame Low speed error rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.12 | Integer32 | read-only | current |
| wlsrChStatsFrameNonUnicastRate OBJECT-TYPE Frame non Unicast rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.13 | Integer32 | read-only | current |
| wlsrChStatsFrameBandwidthRate OBJECT-TYPE Frame Bandwidth rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.14 | Integer32 | read-only | current |
| wlsrChStatsFrameFragmentationRate OBJECT-TYPE Frame Fragmentation Rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.15 | Integer32 | read-only | current |
| wlsrChStatsMonitoredTime OBJECT-TYPE Time in ticks, since we were observing this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.16 | TimeTicks | read-only | current |
| wlsrChannelRateStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2 | not-accessible | current | |
| wlsrChannelRateStatsEntry OBJECT-TYPE Channel Rate Statistics. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1 | not-accessible | current | |
| wlsrChStatsTotPktsAt1Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 1Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.1 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt1Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 1Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.2 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt2Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 2Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt2Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 2Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt5Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 5Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt5Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 5Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt11Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 11Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.7 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt11Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 11Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.8 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt6Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 6Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.9 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt6Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 6Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.10 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt12Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 12Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.11 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt12Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 12Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.12 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt18Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 18Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.13 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt18Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 18Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.14 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt24Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 24Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.15 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt24Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 24Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.16 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt36Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 36Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.17 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt36Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 36Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.18 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt48Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 48Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.19 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt48Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 48Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.20 | Counter32 | read-only | current |
| wlsrChStatsTotPktsAt54Mbps OBJECT-TYPE This attribute indicates the total number of packets observed on this channel at 54Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.21 | Counter32 | read-only | current |
| wlsrChStatsTotBytesAt54Mbps OBJECT-TYPE This attribute indicates the total number of Bytes observed on this channel at 54Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.22 | Counter32 | read-only | current |
| wlsrChannelDATypeStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3 | not-accessible | current | |
| wlsrChannelDATypeStatsEntry OBJECT-TYPE Channel Statistics based on the Address Type. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1 | not-accessible | current | |
| wlsrChStatsTotDABroadcastPkts OBJECT-TYPE This attribute indicates the total number of Broadcast packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.1 | Counter32 | read-only | current |
| wlsrChStatsTotDABroadcastBytes OBJECT-TYPE This attribute indicates the total number of Broadcast Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.2 | Counter32 | read-only | current |
| wlsrChStatsTotDAMulticastPkts OBJECT-TYPE This attribute indicates the total number of Multicast packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.3 | Counter32 | read-only | current |
| wlsrChStatsTotDAMulticastBytes OBJECT-TYPE This attribute indicates the total number of Multicast Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.4 | Counter32 | read-only | current |
| wlsrChStatsTotDAUnicastPkts OBJECT-TYPE This attribute indicates the total number of Unicast packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.5 | Counter32 | read-only | current |
| wlsrChStatsTotDAUnicastBytes OBJECT-TYPE This attribute indicates the total number of Unicast Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.1.6 | Counter32 | read-only | current |
| wlsrChannelFrameTypeStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4 | not-accessible | current | |
| wlsrChannelFrameTypeStatsEntry OBJECT-TYPE Channel Statistics based on Frame Type. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1 | not-accessible | current | |
| wlsrChStatsTotMgmtPkts OBJECT-TYPE This attribute indicates the total number of Management packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1 | Counter32 | read-only | current |
| wlsrChStatsTotMgmtBytes OBJECT-TYPE This attribute indicates the total number of Management Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2 | Counter32 | read-only | current |
| wlsrChStatsTotCtrlPkts OBJECT-TYPE This attribute indicates the total number of Control packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.3 | Counter32 | read-only | current |
| wlsrChStatsTotCtrlBytes OBJECT-TYPE This attribute indicates the total number of Control Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.4 | Counter32 | read-only | current |
| wlsrChStatsTotDataPkts OBJECT-TYPE This attribute indicates the total number of Data packets observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.5 | Counter32 | read-only | current |
| wlsrChStatsTotDataBytes OBJECT-TYPE This attribute indicates the total number of Data Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.6 | Counter32 | read-only | current |
| wlsrChannelPktSizeStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5 | not-accessible | current | |
| wlsrChannelPktSizeStatsEntry OBJECT-TYPE Channel Statistics based on the packet sizes. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1 | not-accessible | current | |
| wlsrChStatsPkts63Bytes OBJECT-TYPE This attribute indicates the total number of packets that were less than 64 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.1 | Counter32 | read-only | current |
| wlsrChStatsPkts64To127 OBJECT-TYPE This attribute indicates the total number of packets that were between 64 and 127 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.2 | Counter32 | read-only | current |
| wlsrChStatsPkts128To255 OBJECT-TYPE This attribute indicates the total number of packets that were between 128 and 255 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3 | Counter32 | read-only | current |
| wlsrChStatsPkts256To511 OBJECT-TYPE This attribute indicates the total number of packets that were between 256 and 511 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4 | Counter32 | read-only | current |
| wlsrChStatsPkts512To1023 OBJECT-TYPE This attribute indicates the total number of packets that were between 512 and 1023 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5 | Counter32 | read-only | current |
| wlsrChStatsPkts1024To1518 OBJECT-TYPE This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.6 | Counter32 | read-only | current |
| wlsrStatsStaGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.3.4 | |||
| wlsrStaStatsTable OBJECT-TYPE This Table contains all the Aggregate statistics collected for a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1 | not-accessible | current | |
| wlsrStaStatsEntry OBJECT-TYPE Station Statistics. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1 | not-accessible | current | |
| wlsrStaAddress OBJECT-TYPE Mac Address of the Station connected to this Access Point. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.1 | MacAddress | not-accessible | current |
| wlsrStaTxPkts OBJECT-TYPE This attribute indicates the total packets Transmitted to the Station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.2 | Counter32 | read-only | current |
| wlsrStaTxBytes OBJECT-TYPE This attribute indicates the total Bytes Transmitted to the Station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.3 | Counter32 | read-only | current |
| wlsrStaRxPkts OBJECT-TYPE This attribute indicates the total packets Received from the Station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4 | Counter32 | read-only | current |
| wlsrStaRxBytes OBJECT-TYPE This attribute indicates the total Bytes Received from the Station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5 | Counter32 | read-only | current |
| wlsrStaTxRetryPkts OBJECT-TYPE This attribute indicates the Retry Packets transmitted by the station | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6 | Counter32 | read-only | current |
| wlsrStaRxRetryPkts OBJECT-TYPE This attribute indicates the Retry Packets received from the station | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7 | Counter32 | read-only | current |
| wlsrStaTxFragmentedPkts OBJECT-TYPE This attribute indicates the Fragmented Packets transmitted by the station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8 | Counter32 | read-only | current |
| wlsrStaRxFragmentedPkts OBJECT-TYPE This attribute indicates the Fragmented Packets Received from the station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.9 | Counter32 | read-only | current |
| wlsrStaReceiveErrPkts OBJECT-TYPE This attribute indicates the total Error Packets received from this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.10 | Counter32 | read-only | current |
| wlsrStaTxTotSignal OBJECT-TYPE The attribute indicates the total transmitted signal computed for this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.11 | Integer32 | read-only | current |
| wlsrStaTxSignalPkts OBJECT-TYPE This attribute indicates the total Signal Packets transmitted by this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.12 | Counter32 | read-only | current |
| wlsrStaTxCurSignal OBJECT-TYPE This attribute indicate the stations current transmit signal strength. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.13 | Integer32 | read-only | current |
| wlsrStaTxHighSignal OBJECT-TYPE This attribute indicate the stations high transmit signal strength. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.14 | Integer32 | read-only | current |
| wlsrStaRxTotNoise OBJECT-TYPE Total Noise. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.15 | Counter32 | read-only | deprecated |
| wlsrStaRxNoisePkts OBJECT-TYPE Received Noise. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.16 | Counter32 | read-only | deprecated |
| wlsrStaRxCurrentNoise OBJECT-TYPE Current Noise. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.17 | Integer32 | read-only | deprecated |
| wlsrStaRxHighNoise OBJECT-TYPE High Noise | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.18 | Integer32 | read-only | deprecated |
| wlsrStaRxLowNoise OBJECT-TYPE Low Noise | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.19 | Integer32 | read-only | deprecated |
| wlsrStaFrameRetryRate OBJECT-TYPE Station Frame Retry Rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.20 | Integer32 | read-only | current |
| wlsrStaFrameLowSpeedRate OBJECT-TYPE Station Frame Low speed error rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.21 | Integer32 | read-only | current |
| wlsrStaFrameNonUnicastRate OBJECT-TYPE Station Frame Non Unicast rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.22 | Integer32 | read-only | current |
| wlsrStaFrameRetryErrorRate OBJECT-TYPE Station Frame Retry Error Rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.23 | Integer32 | read-only | current |
| wlsrStaFrameBandwidthRate OBJECT-TYPE Station Frame Bandwidth rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.24 | Integer32 | read-only | current |
| wlsrStaFrameFragmentationRate OBJECT-TYPE Station Frame Fragmentation Rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.25 | Integer32 | read-only | current |
| wlsrStaFrameHighBandwidthRate OBJECT-TYPE Station Frame High Bandwidth Rate in kbps. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.26 | Integer32 | read-only | current |
| wlsrStaRateStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but represented in terms of rate categories. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2 | not-accessible | current | |
| wlsrStaRateStatsEntry OBJECT-TYPE Station Rate Stats Table | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1 | not-accessible | current | |
| wlsrStaTxPktsAt1Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.1 | Counter32 | read-only | current |
| wlsrStaTxBytesAt1Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.2 | Counter32 | read-only | current |
| wlsrStaTxPktsAt2Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.3 | Counter32 | read-only | current |
| wlsrStaTxBytesAt2Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.4 | Counter32 | read-only | current |
| wlsrStaTxPktsAt5Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.5 | Counter32 | read-only | current |
| wlsrStaTxBytesAt5Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.6 | Counter32 | read-only | current |
| wlsrStaTxPktsAt11Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.7 | Counter32 | read-only | current |
| wlsrStaTxBytesAt11Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.8 | Counter32 | read-only | current |
| wlsrStaTxPktsAt6Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.9 | Counter32 | read-only | current |
| wlsrStaTxBytesAt6Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.10 | Counter32 | read-only | current |
| wlsrStaTxPktsAt12Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.11 | Counter32 | read-only | current |
| wlsrStaTxBytesAt12Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.12 | Counter32 | read-only | current |
| wlsrStaTxPktsAt18Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.13 | Counter32 | read-only | current |
| wlsrStaTxBytesAt18Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.14 | Counter32 | read-only | current |
| wlsrStaTxPktsAt24Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.15 | Counter32 | read-only | current |
| wlsrStaTxBytesAt24Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.16 | Counter32 | read-only | current |
| wlsrStaTxPktsAt36Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.17 | Counter32 | read-only | current |
| wlsrStaTxBytesAt36Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.18 | Counter32 | read-only | current |
| wlsrStaTxPktsAt48Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.19 | Counter32 | read-only | current |
| wlsrStaTxBytesAt48Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.20 | Counter32 | read-only | current |
| wlsrStaTxPktsAt54Mbps OBJECT-TYPE This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.21 | Counter32 | read-only | current |
| wlsrStaTxBytesAt54Mbps OBJECT-TYPE This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.22 | Counter32 | read-only | current |
| wlsrStaRxPktsAt1Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.23 | Counter32 | read-only | current |
| wlsrStaRxBytesAt1Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 1Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24 | Counter32 | read-only | current |
| wlsrStaRxPktsAt2Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25 | Counter32 | read-only | current |
| wlsrStaRxBytesAt2Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 2Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26 | Counter32 | read-only | current |
| wlsrStaRxPktsAt5Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27 | Counter32 | read-only | current |
| wlsrStaRxBytesAt5Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 5Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.28 | Counter32 | read-only | current |
| wlsrStaRxPktsAt11Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.29 | Counter32 | read-only | current |
| wlsrStaRxBytesAt11Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 11Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.30 | Counter32 | read-only | current |
| wlsrStaRxPktsAt6Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.31 | Counter32 | read-only | current |
| wlsrStaRxBytesAt6Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 6Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.32 | Counter32 | read-only | current |
| wlsrStaRxPktsAt12Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.33 | Counter32 | read-only | current |
| wlsrStaRxBytesAt12Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 12Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.34 | Counter32 | read-only | current |
| wlsrStaRxPktsAt18Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.35 | Counter32 | read-only | current |
| wlsrStaRxBytesAt18Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 18Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.36 | Counter32 | read-only | current |
| wlsrStaRxPktsAt24Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.37 | Counter32 | read-only | current |
| wlsrStaRxBytesAt24Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 24Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.38 | Counter32 | read-only | current |
| wlsrStaRxPktsAt36Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.39 | Counter32 | read-only | current |
| wlsrStaRxBytesAt36Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 36Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.40 | Counter32 | read-only | current |
| wlsrStaRxPktsAt48Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.41 | Counter32 | read-only | current |
| wlsrStaRxBytesAt48Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 48Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.42 | Counter32 | read-only | current |
| wlsrStaRxPktsAt54Mbps OBJECT-TYPE This attribute indicates the number of Packets Received by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.43 | Counter32 | read-only | current |
| wlsrStaRxBytesAt54Mbps OBJECT-TYPE This attribute indicates the number of Octets Received by the station at 54Mbps rate. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.44 | Counter32 | read-only | current |
| wlsrStaDATypeStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but broken down in terms of Destination Address Type. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3 | not-accessible | current | |
| wlsrStaDATypeStatsEntry OBJECT-TYPE Station Statistics based on the Destination Address Type. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1 | not-accessible | current | |
| wlsrStaTxDABroadcastPkts OBJECT-TYPE This attribute indicates the number of Broadcast packets transmitted by this Station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.1 | Counter32 | read-only | current |
| wlsrStaTxDABroadcastBytes OBJECT-TYPE This attribute indicates the number of Broadcast Bytes transmitted by this Station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.2 | Counter32 | read-only | current |
| wlsrStaTxDAMulticastPkts OBJECT-TYPE This attribute indicates the number of Multicast packets transmitted by this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.3 | Counter32 | read-only | current |
| wlsrStaTxDAMulticastBytes OBJECT-TYPE This attribute indicates the number of Multicast Bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4 | Counter32 | read-only | current |
| wlsrStaTxDAUnicastPkts OBJECT-TYPE This attribute indicates the total of Unicast packets transmitted by this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5 | Counter32 | read-only | current |
| wlsrStaTxDAUnicastBytes OBJECT-TYPE This attribute indicates the total of Unicast Bytes transmitted by this station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6 | Counter32 | read-only | current |
| wlsrStaFrameTypeStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but broken down into different Frame Types. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4 | not-accessible | current | |
| wlsrStaFrameTypeStatsEntry OBJECT-TYPE Station Frame Type Stats Entry. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1 | not-accessible | current | |
| wlsrStaTxMgmtPkts OBJECT-TYPE This attribute indicates the Transmitted Management packets from a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.1 | Counter32 | read-only | current |
| wlsrStaTxMgmtBytes OBJECT-TYPE This attribute indicates the Transmitted Management Bytes from a station | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.2 | Counter32 | read-only | current |
| wlsrStaTxCtrlPkts OBJECT-TYPE This attribute indicates the Transmitted Control packets from a station | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.3 | Counter32 | read-only | current |
| wlsrStaTxCtrlBytes OBJECT-TYPE This attribute indicates the Transmitted Control Bytes from a station | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.4 | Counter32 | read-only | current |
| wlsrStaTxDataPkts OBJECT-TYPE This attribute indicates the Transmitted Data packets from a station | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.5 | Counter32 | read-only | current |
| wlsrStaTxDataBytes OBJECT-TYPE This attribute indicates the Transmitted Data Bytes observed on this channel. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.6 | Counter32 | read-only | current |
| wlsrStaRxMgmtPkts OBJECT-TYPE This attribute indicates the number of received Management packets at a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.7 | Counter32 | read-only | current |
| wlsrStaRxMgmtBytes OBJECT-TYPE This attribute indicates the number of received Management Bytes at a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.8 | Counter32 | read-only | current |
| wlsrStaRxCtrlPkts OBJECT-TYPE This attribute indicates the number of received Control packets at a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.9 | Counter32 | read-only | current |
| wlsrStaRxCtrlBytes OBJECT-TYPE This attribute indicates the number of received Control Bytes at a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10 | Counter32 | read-only | current |
| wlsrStaRxDataPkts OBJECT-TYPE This attribute indicates the number of received Data packets at a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11 | Counter32 | read-only | current |
| wlsrStaRxDataBytes OBJECT-TYPE This attribute indicates the number of received Data Bytes at a station. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12 | Counter32 | read-only | current |
| wlsrStaPktSizeStatsTable OBJECT-TYPE This table contains all the per channel Packet and Byte Counts but broken down into different Packet Sizes. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5 | not-accessible | current | |
| wlsrStaPktSizeStatsEntry OBJECT-TYPE Station Packet Size Stats. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1 | not-accessible | current | |
| wlsrStaTxPkts63Bytes OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.1 | Counter32 | read-only | current |
| wlsrStaTxPkts64To127 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.2 | Counter32 | read-only | current |
| wlsrStaTxPkts128To255 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.3 | Counter32 | read-only | current |
| wlsrStaTxPkts256To511 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.4 | Counter32 | read-only | current |
| wlsrStaTxPkts512To1023 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.5 | Counter32 | read-only | current |
| wlsrStaTxPkts1024To1518 OBJECT-TYPE This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.6 | Counter32 | read-only | current |
| wlsrStaRxPkts63Bytes OBJECT-TYPE This attribute indicates the number of packets Received by the station that were less than 64 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.7 | Counter32 | read-only | current |
| wlsrStaRxPkts64To127 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.8 | Counter32 | read-only | current |
| wlsrStaRxPkts128To255 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.9 | Counter32 | read-only | current |
| wlsrStaRxPkts256To511 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.10 | Counter32 | read-only | current |
| wlsrStaRxPkts512To1023 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.11 | Counter32 | read-only | current |
| wlsrStaRxPkts1024To1518 OBJECT-TYPE This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. | 1.3.6.1.4.1.14823.2.3.1.1.3.4.5.1.12 | Counter32 | read-only | current |
| wlsrAirMonitorGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.4 | |||
| wlsrAirMonitorApListTable OBJECT-TYPE This table contains all the Access Points monitored by the AM. | 1.3.6.1.4.1.14823.2.3.1.1.4.1 | not-accessible | current | |
| wlsrAirMonitorApListEntry OBJECT-TYPE Ap List Entry | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1 | not-accessible | current | |
| wlsrAmApBSSID OBJECT-TYPE BSSID of the Access Point. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.1 | MacAddress | not-accessible | current |
| wlsrAmSSID OBJECT-TYPE This attribute indicates the SSID of the AP. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.2 | DisplayString (SIZE(0..62)) | read-only | current |
| wlsrAmChannel OBJECT-TYPE This attribute indicates the channel on which this AP is operating. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3 | INTEGER (1..165) | read-only | current |
| wlsrAmPhysicalType OBJECT-TYPE This attribute indicates the physical layer type. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4 | INTEGER {dot11b(1), dot11a(2), dot11g(3)} | read-only | current |
| wlsrAmAccessPointType OBJECT-TYPE This attribute indicates the type of AP. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5 | INTEGER {genericAp(1), softAp(2), ciscoAp(3)} | read-only | current |
| wlsrAmRAPType OBJECT-TYPE Type of the Access Point. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 | INTEGER {valid(1), interfering(2), unsecure(3), dos(4), unknown(5)} | read-only | current |
| wlsrAmRSSI OBJECT-TYPE Access point Receiver Signal Strength Indicator. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7 | Integer32 | read-only | current |
| wlsrAmMonitoredTime OBJECT-TYPE Time in ticks, since the AM is observing this access point. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.8 | TimeTicks | read-only | current |
| wlsrAmInactivityTime OBJECT-TYPE Access point Inactivity Time. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.9 | TimeTicks | read-only | current |
| wlsrAmLoadBalancing OBJECT-TYPE The attributes indicates whether Load balancing is enabled for this access point. | 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.10 | INTEGER {enable(1), disable(2)} | read-only | current |
| wlsrTrapsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.100 | |||
| wlsrTrapObjectsGroup OBJECT-IDENTITY | 1.3.6.1.4.1.14823.2.3.1.1.100.100 | |||
| wlsrTargetApBSSID OBJECT-TYPE This Object is used in the traps to indicate the BSSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.1 | MacAddress | read-only | current |
| wlsrTargetApSSID OBJECT-TYPE This Object is used in the traps to indicate the SSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.2 | DisplayString (SIZE(0..64)) | read-only | current |
| wlsrTargetApChannel OBJECT-TYPE This Object is used in the traps to indicate the Channel of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.3 | INTEGER (1..165) | read-only | current |
| wlsrSourceMac OBJECT-TYPE This Object is used in the traps to indicate the MAC address of the Source. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.4 | MacAddress | read-only | current |
| wlsrNodeMac OBJECT-TYPE This Object is used in the traps to indicate the MAC address of a Node. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.5 | MacAddress | read-only | current |
| wlsrFrameType OBJECT-TYPE This Object is used in the traps to indicate the Frame Type. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.6 | INTEGER {associateRequest(1), associateResponse(2), reassociateRequest(3), reassociateResponse(4), probeRequest(5), probeResponse(6), beacon(9), atim(10), disassociate(11), auth(12), deauth(13)} | read-only | current |
| wlsrAddressType OBJECT-TYPE This Object is used in the traps to indicate the Address Type. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.7 | INTEGER {srcAddress(1), dstAddress(2), bssid(3)} | read-only | current |
| wlsrSignatureName OBJECT-TYPE This Object is used in the traps to indicate the Signature Name. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.8 | OCTET STRING (SIZE(0..64)) | read-only | current |
| wlsrMatchedMac OBJECT-TYPE This Object is used in the traps to indicate the Macaddress. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.9 | MacAddress | read-only | current |
| wlsrMatchedIp OBJECT-TYPE This Object is used in the traps to indicate the Ip Address. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.10 | IpAddress | read-only | current |
| wlsrReceiverMac OBJECT-TYPE This Object is used in the traps to indicate the MAC address of the Receiver. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.11 | MacAddress | read-only | current |
| wlsrTransmitterMac OBJECT-TYPE This Object is used in the traps to indicate the MAC address of the Transmitter. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.12 | MacAddress | read-only | current |
| wlsrRSSI OBJECT-TYPE This Object is used in the traps to indicate the Signal Strength Indicator. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.13 | Integer32 | read-only | current |
| wlsrRogueInfoURL OBJECT-TYPE This Object is used to point to the WEBGUI Rogue AP information URL. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.14 | DisplayString (SIZE(0..256)) | read-only | current |
| wlsrInterferingAPInfoURL OBJECT-TYPE This Object is used to point to the WEBGUI Rogue interfering AP information URL. | 1.3.6.1.4.1.14823.2.3.1.1.100.100.15 | DisplayString (SIZE(0..256)) | read-only | current |
Notifications
| Name | OID | Status |
|---|---|---|
| wlsrUnsecureApDetected NOTIFICATION-TYPE This trap indicates that an Unsecure Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. The AP is declared unsecure, because we matched it to the wlsrMatchedMac/wlsrMatchedIp. | 1.3.6.1.4.1.14823.2.3.1.1.100.1001 | current |
| wlsrStaImpersonation NOTIFICATION-TYPE This trap indicates that an AM at location wlsrLocation detected a Station impersonation. | 1.3.6.1.4.1.14823.2.3.1.1.100.1002 | current |
| wlsrReservedChannelViolation NOTIFICATION-TYPE This trap indicates that an Access Point is detected by an AP at location wlsrLocation, which violates the Reserved Channel configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1003 | current |
| wlsrValidSSIDViolation NOTIFICATION-TYPE This trap indicates that an Access Point violating Valid SSID is detected by an AP at wlsrLocation. | 1.3.6.1.4.1.14823.2.3.1.1.100.1004 | current |
| wlsrChannelMisconfiguration NOTIFICATION-TYPE This trap indicates that an Access Point has a bad channel configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1005 | current |
| wlsrOUIMisconfiguration NOTIFICATION-TYPE This trap indicates that an Access Point has bad OUI configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1006 | current |
| wlsrSSIDMisconfiguration NOTIFICATION-TYPE This trap indicates that an Access Point has bad SSID configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1007 | current |
| wlsrShortPreableMisconfiguration NOTIFICATION-TYPE This trap indicates that an Access Point has bad Short preamble configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1008 | current |
| wlsrWPAMisconfiguration NOTIFICATION-TYPE This trap indicates that an Access Point has bad WPA configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1009 | current |
| wlsrAdhocNetworkDetected NOTIFICATION-TYPE This trap indicates that an AM has detected an Adhoc network. | 1.3.6.1.4.1.14823.2.3.1.1.100.1010 | current |
| wlsrStaPolicyViolation NOTIFICATION-TYPE This trap indicates that a Valid Station policy is violated. | 1.3.6.1.4.1.14823.2.3.1.1.100.1011 | current |
| wlsrRepeatWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP/AM detected a Repeat WEP-IV violation. | 1.3.6.1.4.1.14823.2.3.1.1.100.1012 | current |
| wlsrWeakWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP/AM detected a Weak WEP-IV violation. | 1.3.6.1.4.1.14823.2.3.1.1.100.1013 | current |
| wlsrChannelInterferenceDetected NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation has detected a channel interference on wlsrCurrentChannel. | 1.3.6.1.4.1.14823.2.3.1.1.100.1014 | current |
| wlsrAPInterferenceDetected NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation has detected an AP interference on wlsrCurrentChannel. | 1.3.6.1.4.1.14823.2.3.1.1.100.1015 | current |
| wlsrStaInterferenceDetected NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation has detected a Station interference on wlsrCurrentChannel. | 1.3.6.1.4.1.14823.2.3.1.1.100.1016 | current |
| wlsrFrameRetryRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Retry Rate for AP wlsrTargetApBSSID. | 1.3.6.1.4.1.14823.2.3.1.1.100.1017 | current |
| wlsrFrameReceiveErrorRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Receive Error Rate for AP wlsrTargetApBSSID. | 1.3.6.1.4.1.14823.2.3.1.1.100.1018 | current |
| wlsrFrameFragmentationRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for Frame Fragmentation Rate for AP wlsrTargetApBSSID. | 1.3.6.1.4.1.14823.2.3.1.1.100.1019 | current |
| wlsrFrameBandWidthRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the allocated Bandwidth rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1020 | current |
| wlsrFrameLowSpeedRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Low speed rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1021 | current |
| wlsrFrameNonUnicastRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the Non Unicast traffic rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1022 | current |
| wlsrLoadbalancingEnabled NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has enabled Load balancing. | 1.3.6.1.4.1.14823.2.3.1.1.100.1023 | current |
| wlsrChannelFrameRetryRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Retry Rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1024 | current |
| wlsrChannelFrameFragmentationRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Fragmentation Rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1025 | current |
| wlsrChannelFrameErrorRateExceeded NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that it exceeded an upper threshold for Frame Error Rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1026 | current |
| wlsrSignatureMatch NOTIFICATION-TYPE This trap indicates that we detected a signature match. | 1.3.6.1.4.1.14823.2.3.1.1.100.1027 | current |
| wlsrChannelRateAnomaly NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold. | 1.3.6.1.4.1.14823.2.3.1.1.100.1028 | current |
| wlsrNodeRateAnomaly NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType transmitted by node wlsrNodeMac which exceeds the configured IDS rate threshold. | 1.3.6.1.4.1.14823.2.3.1.1.100.1029 | current |
| wlsrEAPRateAnomaly NOTIFICATION-TYPE This trap indicates that the number of EAP Handshake packets received by an AP/AM at wlsrLocation exceeds the configured IDS EAP Handshake rate. | 1.3.6.1.4.1.14823.2.3.1.1.100.1030 | current |
| wlsrSignalAnomaly NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation detected a Signal Anomaly on wlsrCurrentChannel. | 1.3.6.1.4.1.14823.2.3.1.1.100.1031 | current |
| wlsrSequenceNumberAnomaly NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation received packets which exceeds the acceptable sequence number difference. The acceptable sequence number difference is an IDS Configuration object. | 1.3.6.1.4.1.14823.2.3.1.1.100.1032 | current |
| wlsrDisconnectStationAttack NOTIFICATION-TYPE This trap indicates that an AP/AM detected a station Disconnect attack. | 1.3.6.1.4.1.14823.2.3.1.1.100.1033 | current |
| wlsrApFloodAttack NOTIFICATION-TYPE This trap is triggered when the number of spurious AP's detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold. | 1.3.6.1.4.1.14823.2.3.1.1.100.1034 | current |
| wlsrAdhocNetwork NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation detected an Adhoc Network. Node wlsrSourceMac is connected to an adhoc AP wlsrTargetApBSSID with wlsrTargetApSSID ssid. | 1.3.6.1.4.1.14823.2.3.1.1.100.1035 | current |
| wlsrWirelessBridge NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation detected a Wireless Bridge. The detected bridge is between wlsrSourceMac and wlsrReceiverMac. | 1.3.6.1.4.1.14823.2.3.1.1.100.1036 | current |
| wlsrInvalidMacOUI NOTIFICATION-TYPE This trap indicates that an AP/AM at wlsrLocation detected an Invalid MAC OUI in transmission from the Node wlsrNodeMac. The invalid mac is the <wlsrAddressType>. | 1.3.6.1.4.1.14823.2.3.1.1.100.1037 | current |
| wlsrLoadbalancingDisabled NOTIFICATION-TYPE This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP with BSSID wlsrTargetApBSSID has disabled Load balancing. | 1.3.6.1.4.1.14823.2.3.1.1.100.1038 | current |
| wlsrWEPMisconfiguration NOTIFICATION-TYPE This trap indicates that an Access Point has bad WEP configuration. | 1.3.6.1.4.1.14823.2.3.1.1.100.1039 | current |
| wlsrStaRepeatWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP/AM detected a Repeat WEP-IV violation. for a Station | 1.3.6.1.4.1.14823.2.3.1.1.100.1040 | current |
| wlsrStaWeakWEPIVViolation NOTIFICATION-TYPE This trap indicates that an AP/AM detected a Weak WEP-IV violation. for a Station | 1.3.6.1.4.1.14823.2.3.1.1.100.1041 | current |
| wlsrStaAssociatedToUnsecureAp NOTIFICATION-TYPE This trap indicates that a station with wlsrNodeMac associated with an Unsecure Access Point wlsrTargetApBSSID. This is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. | 1.3.6.1.4.1.14823.2.3.1.1.100.1042 | current |
| wlsrAdhocNetworkBridgeDetected NOTIFICATION-TYPE This trap indicates that an AM has detected an Adhoc network that is bridging to a wired network | 1.3.6.1.4.1.14823.2.3.1.1.100.1043 | current |
| wlsrInterferingApDetected NOTIFICATION-TYPE This trap indicates that an Interfering Access Point is detected by an Air Monitor located at wlsrLocation on channel wlsrCurrentChannel. | 1.3.6.1.4.1.14823.2.3.1.1.100.1044 | current |